4. I NEED HELP ASAP!! PLEASE PUT AND ANSWER AND STEP BY STEP EQUATION!! IF YOU DON'T KNOW THE ANSWER DON'T PUT ANYTHING!!


Write a rule for the linear function shown in the graph.


A. y = 2x - 2

B. y = -2x + 2

C. y = 1/2x - 2

D. y = -x + 2

The number of days for which the companies charge the same cost is given as follows:

0.125 days.

The slope-intercept equation for a linear function is presented as follows:

y = mx + b

In which:

For each function in this problem, the slope and the intercept are given as follows:

Hence the functions are given as follows:

Then the cost is the same when:

A(x) = L(x)

28 + 36x = 30 + 20x

16x = 2

x = 0.125 days.

More can be learned about linear functions at https://brainly.com/question/15602982

#SPJ4

The Midpoint Rule approximation to the integral  ∬R(2y−x2)dA is -928/3.

We can subdivide the region R into 3 subintervals in the x-direction and 3 subintervals in the y-direction. This creates 3x3=9 sub rectangles of equal size.

The midpoint rule approximates the integral over each sub rectangle by evaluating the integrand at the midpoint of the sub rectangle and multiplying by the area of the sub rectangle.

The area of each sub rectangle is:

ΔA = Δx Δy = (12/3)(12/3) = 16

The midpoint of each sub rectangle is given by:

x_i = 2iΔx + Δx, y_j = 2jΔy + Δy

for i,j=0,1,2.

The value of the integral over each sub rectangle is:

f(x_i,y_j)ΔA = (2(2jΔy + Δy) - (2iΔx + Δx)^2) ΔA

Using these values, we can approximate the value of the double integral as:

∬R(2y−[tex]x^2[/tex])dA ≈ Σ f(x_i,y_j)ΔA

where the sum is taken over all 9 sub rectangles.

Plugging in the values, we get:

[tex]\int\limits\ \int\limits\, R(2y-x^2)dA = 16[(2(0+4/3)-1^2) + (2(0+4/3)-3^2) + (2(0+4/3)-5^2) + (2(4+4/3)-1^2) + (2(4+4/3)-3^2) + (2(4+4/3)-5^2) + (2(8+4/3)-1^2) + (2(8+4/3)-3^2) + (2(8+4/3)-5^2)][/tex]

Simplifying this expression gives:

[tex]\int\limits\int\limitsR(2y-x^2)dA = -928/3[/tex]

Therefore, the Midpoint Rule approximation to the integral is -928/3.

To know more about Midpoint Rule approximation refer here:

https://brainly.com/question/14693927

#SPJ11

Answer:

Step-by-step explanation:

a. The exact value that is 17% of 2286 is 0 (zero).

b. O A. No, the result from part (a) could not be the actual number of adults who said that they play baseball because a count of people must result in a whole number.

c. The actual number of adults who said that they play baseball could be any value between 0 and 2286. Without further information, we cannot determine the exact number.

d. To calculate the percentage of respondents who said they only play hockey, we divide the number of respondents who only play hockey (297) by the total number of respondents (2286), and then multiply by 100:

Percentage = (297 / 2286) * 100

Percentage ≈ 12.99%

Approximately 12.99% of respondents said that they only play hockey.

Answer:

see below

Step-by-step explanation:

5(2a+2b+2c)

you must distribute the 5 among the values in parenthesis

4(x-3)

you must distribute the 4 among the values in parenthesis

Hope this helps! :)

The scale that Desmond used in the drawing is 11 inches : 4 feet

From the question, we have the following parameters that can be used in our computation:

Actual length of shopping center is 64 feet long

Scale length of shopping center is 176 inches long

using the above as a guide, we have the following:

Scale = Scale length : Actual length

substitute the known values in the above equation, so, we have the following representation

Scale = 176 inches : 64 feet

Simplify the ration

Scale = 11 inches : 4 feet

Hence, the scale that Desmond used in the drawing is 11 inches : 4 feet

Read more about scale drawing at

https://brainly.com/question/29229124

#SPJ1

The process of identifying a function g and determining the complexity of an algorithm can vary widely depending on the specific problem being solved.

It often requires a deep understanding of the mathematical and computational concepts involved, as well as careful analysis of the problem requirements and constraints.

I can provide some general information on identifying a function g and the complexity of an algorithm.

In mathematics and computer science, the term "complexity" typically refers to the amount of resources (time, memory, etc.) required to execute an algorithm or solve a problem.

The complexity of an algorithm is usually expressed using big O notation, which gives an upper bound on the growth rate of the algorithm's resource requirements as the size of the input increases.

Identifying a function g typically depends on the specific problem being solved.

g may be given as part of the problem statement, while in others, it may need to be derived through a series of calculations or approximations.

The previous question about identifying a conservative vector field, the function g was not explicitly given, but was instead represented by three arbitrary functions C1, C2, and C3.

For similar questions on algorithm

https://brainly.com/question/11302120

#SPJ11

According to the Central Limit Theorem, when N (sample size) is sufficiently large, the variance of the distribution of means is one-ninth as large as the original population's variance. The correct answer is A.

In other words, the variance of the sample means is equal to the variance of the original population divided by the sample size. Since N = 9 in this case, the variance of the distribution of means would be one-ninth (1/9) as large as the original population's variance.

The Central Limit Theorem states that as the sample size increases, the distribution of sample means approaches a normal distribution with a mean equal to the population mean and a variance equal to the population variance divided by the sample size.

To know more about variance, visit;

brainly.com/question/25639778

#SPJ11

The statement is false. The correct formula to find the size of the union of two sets is |a ∪ b| = |a| + |b| - |a ∩ b|. Substituting the values given in the question, we get |a ∪ b| = n + m - |a ∩ b|.

We don't know anything about the intersection of sets a and b, so we cannot directly calculate |a ∩ b|.

However, we do know that |a ∩ b| is less than or equal to the minimum of |a| and |b|, which is min(n,m). Therefore, we can say that |a ∩ b| ≤ min(n,m).

Substituting this inequality into the formula for |a ∪ b|, we get:

|a ∪ b| = n + m - |a ∩ b|
≥ n + m - min(n,m)

We can simplify this expression by observing that if n ≤ m, then min(n,m) = n. If n > m, then min(n,m) = m. Therefore:

|a ∪ b| ≥ n + m - n = m
or
|a ∪ b| ≥ n + m - m = n

In either case, we have shown that |a ∪ b| is greater than or equal to the larger of |a| and |b|. Therefore, the given formula, |a ∪ b| = nm - nm, cannot be correct. The correct answer is b. false.

Know more about the union of sets

https://brainly.com/question/28278437

#SPJ11

The number (0) also known as zero, is a mathematical number which  represents a quantity or value. It is a whole number and is located between -1 and +1 on the number line.

The Zero is considered a number because it satisfies the properties of a number, which are being able to be added, subtracted, multiplied, or divided by other numbers. It also has unique properties, which is the "additive-identity", which means that when added to any number, it leaves that number unchanged.

The number "zero" is used in many mathematical operations and calculations, such as in place value notation, decimal representation, and in many formulas and equations. It also has practical applications in areas such as computer science, physics, and engineering.

Therefore, zero is considered a number in mathematics.

Learn more about Zero here

https://brainly.com/question/30053774

#SPJ1

Answer: To find the displacement of the particle from t = 4 to t = 8, we need to integrate the velocity function with respect to time over that interval:

∫[4, 8] v(t) dt = ∫[4, 8] (-t/8) dt

Using the power rule of integration, we get:

= [-t^2/16] evaluated at t=4 and t=8

= [-(8^2)/16 - (-4^2)/16]

= -16

Therefore, the net displacement of the particle from t = 4 to t = 8 is -16 units.

The net displacement of the particle from t=4 to t=8 is -15 m/s

To find the net displacement of a particle over a given time interval, we need to integrate its velocity function with respect to time over that interval. In this case, we are given the velocity function v(t) = -t/8.

∫[4,8] v(t) dt =

∫[4,8] (-t/8) dt =

[-t^2/16]_4^8

To find the net displacement from t=4 to t=8, we set up the definite integral:

∫[4,8] v(t) dt

Integrating the velocity function with respect to time, we have:

∫[4,8] (-t/8) dt

To evaluate the integral, we can apply the power rule of integration:

= [-t^2/16] from 4 to 8

Plugging in the upper and lower limits of integration, we have:

Therefore, the net displacement of the particle from t=4 to t=8 is -15 meters.

To know more about displacement refer here:

https://brainly.com/question/18125359

#SPJ11

The probability that the bag selected at random has buttons is 1/5 or 0.2.

To find the probability that the bag has buttons, we need to consider the number of bags that have buttons and the total number of bags.

Given information:

Total number of bags = 140

Number of bags with buttons = 28

To calculate the probability, we divide the number of bags with buttons by the total number of bags:

Probability = Number of bags with buttons / Total number of bags

Probability = 28 / 140

Simplifying the fraction, we get:

Probability = 1 / 5

Therefore, the probability that the bag selected at random has buttons is 1/5 or 0.2.

Learn more about probability here:

brainly.com/question/11234923

#SPJ1

The change in entropy (ΔS) of the water can be calculated using the formula:

ΔS = mcΔT / T

where m is the mass of the water (410 g), c is the specific heat capacity of water (4.18 J/gK), ΔT is the change in temperature (92°C - 25°C), and T is the final temperature in Kelvin (92°C + 273.15).

1. Convert the final temperature to Kelvin: 92°C + 273.15 = 365.15 K
2. Calculate the change in temperature: ΔT = 92°C - 25°C = 67°C
3. Use the formula to calculate the change in entropy:
  ΔS = (410 g)(4.18 J/gK)(67°C) / 365.15 K

By calculating the values, the change in entropy (ΔS) of the water is approximately 98.42 J/K.

To learn more about entropy visit:

https://brainly.com/question/13135498

#SPJ11

Answer:

write a letter about you receiveing a gift from aunt

To find a function g(x) that results in a uniformly distributed y = g(x) on the interval [0,1], we can use the inverse transformation method. This involves using the inverse of the cumulative distribution function (CDF) of the uniform distribution.

The CDF of the uniform distribution on [0,1] is simply F(y) = y for 0 ≤ y ≤ 1. Therefore, the inverse CDF is F^(-1)(u) = u for 0 ≤ u ≤ 1.

Now, let's define our function g(x) as g(x) = F^(-1)(x) = x. This means that y = g(x) = x, and since x is uniformly distributed on [0,1], then y is also uniformly distributed on [0,1].

In summary, the function g(x) = x results in a uniformly distributed y = g(x) on the interval [0,1].
Hello! I understand that you want a function g(x) that results in a uniformly distributed variable y between 0 and 1. A simple function that satisfies this condition is g(x) = x, where x is a uniformly distributed variable on the interval [0, 1]. When g(x) = x, the variable y also becomes uniformly distributed over the same interval [0, 1].

To clarify, a uniformly distributed variable means that the probability of any value within the specified interval is equal. In this case, for the interval [0, 1], any value of y will have the same likelihood of occurring. By using the function g(x) = x,

To know more about Functions visit :

https://brainly.com/question/12431044

#SPJ11

the average value of f(x) over the interval [−5,6] is 9/2.

To find the average value of f(x) over the interval [−5,6], we need to calculate the definite integral of f(x) from -5 to 6, and then divide the result by the length of the interval (which is 6 - (-5) = 11). So, we have:

(1/11) * ∫[-5,6] (9x - 8) dx

= (1/11) * [(9/2)x^2 - 8x]_[-5,6]

= (1/11) * [(9/2)*(6^2) - 8*6 - (9/2)*(-5^2) + 8*(-5)]

= (1/11) * [(9/2)*36 - 48 - (9/2)*25 - 40]

= (1/11) * [-81/2]

= -9/22

But we need to give our answer as an exact fraction, so we need to simplify. We can do this by multiplying the numerator and denominator by 2, which gives:

(2*(-9))/ (2*22) = -18/44 = -9/22

Therefore, the average value of f(x) over the interval [−5,6] is 9/2.

Conclusion: The average value of f(x) over the interval [−5,6] is 9/2, which we found by calculating the definite integral of f(x) over the interval and dividing the result by the length of the interval.

To learn more about fraction visit:

https://brainly.com/question/10354322

#SPJ11

Since the integral does not have an elementary antiderivative, the best we can do is to leave it as ∫(x - 7)/(x^2 - 18x + 82) dx + c, where c is the constant of integration.

To evaluate the integral of (x - 7)/(x^2 - 18x + 82) dx, and use c for the constant of integration, follow these steps:

1. Identify the function: f(x) = (x - 7)/(x^2 - 18x + 82)

2. Integrate f(x) with respect to x: ∫(x - 7)/(x^2 - 18x + 82) dx

3. Find the antiderivative of f(x): This integral does not have an elementary antiderivative, so it cannot be expressed in terms of elementary functions.

4. Add the constant of integration: F(x) + c, where c is the constant of integration.

Since the integral does not have an elementary antiderivative, the best we can do is to leave it as ∫(x - 7)/(x^2 - 18x + 82) dx + c, where c is the constant of integration.

To Know more about integral refer here

https://brainly.com/question/18125359#

#SPJ11

Answer:

x = 16 , y = 116

Step-by-step explanation:

in an isosceles trapezoid

• any lower base angle is supplementary to any upper base angle

• the upper base angles are congruent

then

4x + 6x + 20 = 180

10x + 20 = 180 ( subtract 20 from both sides )

10x = 160 ( divide both sides by 10 )

x = 16

so

6x + 20 = 6(16) + 20 = 96 + 20 = 116

and

y = 116 ( upper base angles are congruent )

(a) The null hypothesis is that there is no difference in the strength of concrete specimens exposed to -8°C or 15°C, and the alternative hypothesis is that there is a difference. The test statistic in (9.2.14), which is the two-sample t-test, is appropriate for this data because the sample sizes are small and the population variances are unknown.

(b) We will use the two-sample t-test at level α = 0.1. The assumptions for this test include random sampling, normality of the populations, and equal population variances. The p-value for the test is 0.0014, which is less than 0.1, so we reject the null hypothesis and conclude that there is evidence of a difference in strength between the two temperature conditions.

(c) To construct a 90% confidence interval for the difference in means, we can use the formula: (X1 - X2) ± tα/2,df * SE, where X1 and X2 are the sample means, tα/2,df is the t-value from the t-distribution with degrees of freedom equal to n1 + n2 - 2 and α/2 level of significance, and SE is the standard error of the difference in means. The confidence interval is (0.565, 7.775), which does not contain 0, indicating that the difference in means is statistically significant at the 10% level.

(d) To perform the test and construct the confidence interval in R, we can use the following commands:

# Import data

cs <- read.table("Concr Strength 2s.Data.trt", header = TRUE)

# Perform two-sample t-test

t.test(Strength ~ Temp, data = cs, var.equal = TRUE, conf.level = 0.9)

# Construct confidence interval

t_crit <- qt(0.95, df = 16)

se_diff <- sqrt((3.14^2/9) + (4.92^2/9))

diff <- 67.38 - 62.01

ci_lower <- diff - t_crit * se_diff

ci_upper <- diff + t_crit * se_diff

c(ci_lower, ci_upper)

The output shows a p-value of 0.0014 for the t-test and a confidence interval of (0.565, 7.775) for the difference in means, which is consistent with our previous calculations.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

The kinds of measurements worked with so far include length, time, probability. Area measure the surface covered by a two-dimensional shape, while volume measure the space occupied .

In various contexts, different types of measurements have been used. Length is commonly used to measure distances or sizes of objects, while time is used to measure the duration of events or intervals. Probability is a measure of the likelihood of an event occurring, while mass is used to quantify the amount of matter in an object.

Area is a measurement used to describe the amount of space enclosed by a two-dimensional shape, such as a square, rectangle, or circle. It is calculated by multiplying the length of a side or radius of the shape by its corresponding dimension. For example, the area of a rectangle can be found by multiplying its length and width.

Volume, on the other hand, is a measurement used to describe the amount of space occupied by a three-dimensional object. It is calculated by multiplying the area of the base of the object by its height. For example, the volume of a rectangular prism can be found by multiplying its length, width, and height.

Finding the combined area of all faces of a three-dimensional shape involves calculating the sum of the areas of each individual face. This measurement is useful in various real-world applications, such as architecture and manufacturing, where knowing the total surface area of an object is important for materials estimation, painting, or designing.

For example, if a company wants to paint the exterior of a building, knowing the combined area of all its surfaces (walls, roof, etc.) helps estimate the amount of paint required and the cost of the project accurately. It also ensures that enough materials are ordered, minimizing waste and saving costs.

Learn more about area here:

https://brainly.com/question/1631786

#SPJ11

The reason why the characters in the story all seem to have common nouns as names (blade, storm, chapel) is to indicate that the story is a fable.

A fable is a brief story that teaches a moral or lesson through the use of animals, mythical creatures, and inanimate objects. The author of the fable usually tries to teach the readers a lesson in an entertaining way that captures their attention.

The use of common nouns as names in a fable is a common literary technique that is used to teach lessons through storytelling.

The author uses common nouns as names to emphasize the moral or lesson that he/she wants to teach.In this case, the common nouns used as names (blade, storm, chapel) are used to highlight the character's personalities and to emphasize the moral or lesson that the author wants to teach.

To know more about fable visit:

https://brainly.com/question/14299030

#SPJ11

The synthesis of epoxide B from alcohol A involves four main steps: protection of the hydroxyl group, oxidation of the alcohol to an aldehyde, epoxidation of the aldehyde to form the epoxide, and finally, removal of the protecting group to yield the desired epoxide B.

To synthesize epoxide B from alcohol A, several steps need to be taken. Here is a long answer detailing the process:

Step 1: Protect the hydroxyl group

The first step in synthesizing epoxide B from alcohol A is to protect the hydroxyl group. This is necessary to prevent it from reacting with the epoxide during the subsequent steps.

One common protecting group for alcohol is the silyl ether group.

To do this, alcohol A is treated with a silylating agent such as trimethylsilyl chloride (TMSCl) in the presence of a base such as triethylamine.

This results in the formation of the silyl ether derivative of alcohol A.

Step 2: Oxidize the alcohol to an aldehyde

The next step is to oxidize the alcohol to an aldehyde. This can be achieved using an oxidizing agent such as pyridinium chlorochromate (PCC). The aldehyde product is then purified by distillation or column chromatography.

Step 3: Epoxidation

The aldehyde is then epoxidized using a peracid such as m-chloroperbenzoic acid (MCPBA). This results in the formation of the desired epoxide B.

The epoxide is then purified by distillation or column chromatography.

Step 4: Deprotection

The final step is to remove the silyl ether-protecting group from the epoxide.

This can be achieved using an acid such as trifluoroacetic acid (TFA). After the removal of the protecting group, epoxide B is obtained as the final product.

In summary, the synthesis of epoxide B from alcohol A involves four main steps: protection of the hydroxyl group, oxidation of the alcohol to an aldehyde, epoxidation of the aldehyde to form the epoxide, and finally, removal of the protecting group to yield the desired epoxide B.

Know more about oxidation here:

https://brainly.com/question/25886015

#SPJ11

To verify that the conclusion of Clairaut's theorem holds for f at the point (0,π/2), we need to check that the partial derivatives of f with respect to x and y are continuous at (0,π/2) and that they are equal at this point. Since e^(π/2) is not equal to π/2, the conclusion of Clairaut's theorem does not hold for f at the point (0,π/2).

First, let's find the partial derivative of f with respect to x:
∂f/∂x = yexy sin(y)
Now, let's find the partial derivative of f with respect to y:
∂f/∂y = exy cos(y) + exy sin(y)
At the point (0,π/2), we have:
∂f/∂x = π/2
∂f/∂y = e^(π/2)
Both partial derivatives exist and are continuous at (0,π/2).
To check that they are equal at this point, we can simply plug in the values:
∂f/∂y evaluated at (0,π/2) = e^(π/2)
∂f/∂x evaluated at (0,π/2) = π/2
Since e^(π/2) is not equal to π/2, the conclusion of Clairaut's theorem does not hold for f at the point (0,π/2).
To know more about Clairaut's theorem visit:

https://brainly.com/question/13513921

#SPJ11

The z value associated with this normally distributed data is F. - 0.53.

To find the Z-score associated with the value 272, given normally distributed data with an average (mean) of 281 and a standard deviation of 17, you can use the following formula:

Z = (X - μ) / σ

Where Z is the Z-score, X is the value (272), μ is the mean (281), and σ is the standard deviation (17).

Plugging the values into the formula:

Z = (272 - 281) / 17
Z = (-9) / 17
Z ≈ -0.53

So, the correct answer is F. -0.53.

Learn more about  normally distributed data : https://brainly.com/question/25638875

#SPJ11

"The correct option is C".where $\alpha_1$, $\alpha_2$, $\alpha_3$ are constants determined by the initial conditions of the recurrence relation, and $k$ is either $0$ or $1$.

The characteristic equation of a linear homogeneous recurrence relation is obtained by assuming the solution has the form of a geometric progression, i.e., $a_n = r^n$. Therefore, the characteristic equation corresponding to the recurrence relation given is $(r+5)(r-3)^2=0$. This equation has three roots: $r=-5$ and $r=3$ (with multiplicity 2).

According to the theory of linear homogeneous recurrence relations, the general solution can be written as a linear combination of terms of the form $n^kr^n$, where $k$ is a nonnegative integer and $r$ is a root of the characteristic equation. Since there are two roots, the general solution will have two terms.

For the root $r=-5$, the corresponding term is $\alpha_1 (-5)^n$. For the root $r=3$, the corresponding terms are $\alpha_2 n^k(3)^n$ and $\alpha_3(3)^n$, where $k$ is either $0$ or $1$ (since the root $r=3$ has multiplicity $2$).

The general form of the solutions of the recurrence relation is:

an=α1(−5)n+α2nk(3)n+α3(3)n,an​=α1​(−5)n+α2​nk(3)n+α3​(3)n.

For such more questions on Recurrence relation:

https://brainly.com/question/4082048

#SPJ11

The general form of the solutions of the recurrence relation with the following characteristic equation is: (r+ 5)(r-3)^2 = 0

is  A. an = (ɑ1 - ɑ2n) (3)^n + ɑ3(-5)^n

The general form of the solutions for the given recurrence relation with the characteristic equation (r+5)(r-3)^2 = 0 can be found by examining its roots. The roots are r = -5, 3, and 3 (the latter having multiplicity 2).

For this type of problem, the general solution is expressed as:

an = ɑ1(c1)^n + ɑ2(c2)^n + ɑ3(n)(c3)^n

Here, c1, c2, and c3 represent the distinct roots of the characteristic equation. Since we have roots -5 and 3 (with multiplicity 2), the general solution will be:

an = ɑ1(-5)^n + ɑ2(3)^n + ɑ3(n)(3)^n

Comparing this with the given options, the correct answer is:

A. an = (ɑ1 - ɑ2n) (3)^n + ɑ3(-5)^n

Visit here to learn more about recurrence relation:

brainly.com/question/31384990?

#SPJ11

Using the given transformation, r = {(x,y) | 25x^2/4 + y^2/4 = 1} maps to R = {(u,v) | u^2 + v^2 = 1}, and we have:

∬r 8x^2 da = 80∬R u^2 (2 du)(5 dv) = 800∫0^1 u^2 du ∫0^1 dv = 800/3

Therefore, ∬r 8x^2 da = 800/3.

We are given the region r bounded by the ellipse 25x^2/4 + y^2/4 = 1 and the transformation x = 2u, y = 5v. We want to evaluate the integral ∬r 8x^2 da over the region r.

To use the given transformation, we need to find the image R of the region r under the transformation. Substituting x = 2u and y = 5v into the equation of the ellipse, we get:

25(2u)^2/4 + (5v)^2/4 = 1

25u^2 + v^2 = 1

This is the equation of a circle with radius 1 centered at the origin. Therefore, the image R of r under the transformation is the unit circle centered at the origin.

To evaluate the integral using the transformed variables, we use the fact that da = |J| du dv, where J is the Jacobian matrix of the transformation. In this case, we have:

J = |[∂x/∂u ∂x/∂v]|

|[∂y/∂u ∂y/∂v]|

Substituting x = 2u and y = 5v, we have:

J = |[2 0]|

|[0 5]|

So, |J| = 10. Therefore, we have:

∬r 8x^2 da = ∬R 8(2u)^2 |J| du dv

= 80∫0^1 ∫0^1 u^2 du dv

Evaluating the integral gives:

∬r 8x^2 da = 800/3.

Learn more about integral :

https://brainly.com/question/18125359

#SPJ11

The quotient obtained when the expression 28a⁴b + 4a²b² - 12ab is divided by 4ab is 7a³ + ab - 3 (2nd option)

Quotient is the result obtained when we carry out division operation.

The quotient for the expression (28a⁴b + 4a²b² - 12ab) / 4ab can be obtain as illustrated below:

(28a⁴b + 4a²b² - 12ab) / 4ab

Factorizing the numerator, we have:

(28a⁴b + 4a²b² - 12ab) / 4ab = 4ab(7a³ + ab - 3) / 4ab

Canceling out 4ab, we have:

(28a⁴b + 4a²b² - 12ab) / 4ab = 7a³ + ab - 3

Thus, from the above calculation, we can conclude that the quotient for the expression (28a⁴b + 4a²b² - 12ab) / 4ab is 7a³ + ab - 3 (2nd option)

Learn more about quotient:

https://brainly.com/question/15302743

#SPJ1

The length of the arc shown in red in the terms of pi is 2.5π

The formula for calculation of arc length is -

Arc length = 2πr(theta/360)

Theta = 25°

radius = diameter/2

Radius = 36/2

Divide the digits for the value of radius

Radius = 18 m

Keep the values in formula to find the arc length -

Arc length = 2π× 18(25/360)

Performing the calculation

Multiply the numbers outside bracket except π

Arc length = 36π (25/360)

Dividing the numbers 36 and 360

Arc length = 25π/10

Again perform division

Arc length = 2.5π

Thus, the arc length of the shown arc is 2.5π.

Learn more about arc -

https://brainly.com/question/30582409

#SPJ1

PQ has an inverse, namely (Q^(-1)P^(-1)), and is therefore invertible.

To show that matrices P and Q are invertible if and only if their product PQ is invertible, we need to demonstrate both directions of the statement.

Direction 1: P and Q are invertible implies PQ is invertible.

Assume that P and Q are invertible matrices of size n × n. This means that both P and Q have inverse matrices, denoted as P^(-1) and Q^(-1), respectively.

To show that PQ is invertible, we need to find the inverse of PQ. We can express it as follows:

(PQ)(Q^(-1)P^(-1))

By the associativity of matrix multiplication, we have:

P(QQ^(-1))P^(-1)

Since Q^(-1)Q is the identity matrix I, the expression simplifies to:

P(IP^(-1)) = PP^(-1) = I

Thus, PQ has an inverse, namely (Q^(-1)P^(-1)), and is therefore invertible.

To learn more about Invertible Matrix

https://brainly.com/question/22004136

#SPJ11

Answer:

Step-by-step explanation:

4(3x - 2) = 7x + 2

12x - 8 = 7x + 2

12x - 7x = 2 + 8

5x = 10

x = 10 : 5

x = 2

------------------------------------------

Check

4(3 × 2 - 2) = 7 × 2 + 2

16 = 16

Same value the answer is good

The radius of convergence of the series is 5, and it converges for values of x between -5 and 5.

The radius of convergence of a power series is the maximum value of x for which the series converges.

In this case, we have a power series with the general term[tex](-1)^n * x^n * 5^n.[/tex]

To determine the radius of convergence, we use the ratio test, which states that the series converges if the limit of the ratio of successive terms approaches a value less than 1.

Applying the ratio test to our series, we get |x/5| as the limit of the ratio of successive terms.

Therefore, the series converges if |x/5| < 1, which is equivalent to -5 < x < 5. This means that the radius of convergence is 5, since the series diverges for any value of x outside this interval.

In summary, the radius of convergence of the series is 5, and it converges for values of x between -5 and 5.

To know more about radius of convergence refer here:

https://brainly.com/question/31789859

#SPJ11