Answer:
22×10⁻¹³
Explanation:
Scientific notation:
Scientific notation is the way to express the large value in short form.
The number in scientific notation have two parts.
The digits (decimal point will place after first digit)
× 10 ( the power which put the decimal point where it should be)
for example the number 6324.4 in scientific notation will be written as = 6.3244 × 10³
When we multiply or divide the values the number of significant figures must be equal to the less number of significant figures in given value. Thus, in given value,
(4.1357× 10⁻¹⁵) × (5.4×10²)
22×10⁻¹³
Left: red and white rock with rounded grains and coarse texture. Right: flat, gray rock composed of thin layers.
Which statement about the rocks is accurate?
The rock on the right is foliated.
The rock on the left formed from granite.
The rock on the left is formed from cooled magma.
The rock on the right has randomly arranged grains.
Answer:
The rock on the right is foliated
Explanation:
I took the test
Find the unknown quantity
D=5g/cm to the 3 power
V=?
M=20g
Answer:
The answer is 4 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 20 g
density = 5 g/cm³
So we have
[tex]volume = \frac{20}{5} \\ [/tex]
We have the final answer as
4 cm³Hope this helps you
How do I put Chlorofluorocarbons in a sentence?
Answer: Here are some examples
Explanation:
1. In the southern spring, ozone is destroyed above Antarctica, mainly by manufactured compounds called chlorofluorocarbons (CFCs )
2. It is now generally accepted that the loss of stratospheric ozone is caused by chemical reactions initiated by chlorofluorocarbons.
3. Your refrigerator and other home appliances emit Chlorofluorocarbons, or CFCs, as do aerosol spray cans.
Hope this hlps!
Explanation:
To be able to put the chemical term chlorofluorocarbons in a sentence, you must first understand what the chemical species denotes.
We know chlorofluorocarbons are a group of compounds that consists of atoms of chlorine, flourine, and carbon.
Now, here are some sample sentences;
Chlorofluorocarbons are one of the leading causes of ozone depletion in the atmosphere. Most national governments are putting measures in place to check the use of chlorofluorocarbons in industrial manufacturing.If we can innovate a substitute for chlorofluorocarbons, the environment would be safer.Which of the situations below describes an ethical dilemma related to food
engineering?
A. Educational seminars should be conducted to help consumers
grow their own crops.
B. Production plants should be located close to consumers so
distribution runs efficiently.
C. Pesticides protect our crops, but some European countries have
linked them to thyroid disorders.
D. Preservatives must be used so that food can reach the consumer
before spoiling
Answer:
C. Pesticides protect our crops, but some European countries have
linked them to thyroid disorders.
Explanation:
Researches involving human or sometimes animals are subject to critical decision making.
They can easily trespass on the fundamental rights of people and some other issues.
The use of pesticides on a crop which can lead to thyroid disorder is an ethical dilemma. In this case, the pesticide helps to prevent crop loss due to the invasion of pests. This will boost food production and ensure food is availableLikewise, the application of the pesticide causes thyroid issues. This is an ethical dilemma issue.Ernest Rutherford's discovery led to the understanding that atoms consist mostly of empty space with
Answer: With a positively charged nucleus.
Explanation:
What was Wegener's continental drift idea?
Answer: In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other.
Explanation: He called this movement continental drift.
What volume will 250. mL of gas at STP occupy ig the pressure changes to 2.0 atmospheres and the temperature changes at 30 degrees Celsius
Answer:
it is 75 degrees
Explanation:
Volume is 138.7 mL.
The equation for calculation of volume is as follows:-
[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]
STP:-
Temperature=273 K
Pressure=1 atm
[tex]\frac{1 atm\times250mL}{273 K} =\frac{2 atm\times V_2}{303\ K}\\V_2=138.7\ mL[/tex]
Hence, the volume is 138.7 mL.
To know more about:-
https://brainly.com/question/15988929
POSSIE Gallium (Ga) is a soft, silvery metal used primarily in electronic circuits, semiconductors, and light-emitting diodes (LEDs). It is also useful in high-temperature thermometers, barometers, pharmaceuticals, and nuclear medicine tests. Which electron configuration represents the electrons in an atom of gallium at ground state? O1s 2s22p63s23p64524d104p? O 182 2s22p63s23p64s24p1 o 1s 2s22p63s23p64823d104p? O 182 2s22p63s23p64s3
The ground state configuration : 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹
Further explanationElectrons can move the shell up or down by releasing energy or absorbing energy
It can be concluded that there are 2 conditions:
Ground-state is the state of electrons filling the shell with the lowest energy levels.
Excited-state is the state of electrons which occupies a higher energy level
The state of excited electrons can be seen from the presence of electrons which do not fill the shell completely but fill the shell afterward
Gallium (Ga) is a metal located in group 13, p-block and period 4
Atomic number : 31
If we look at the options:
options 1,2 and 3 do not conform to Aufbau principle(Electrons occupy orbitals of the lowest energy level ), because 3d orbitals do not exist and the number of electrons is also not 31
So that the most appropriate electron configuration is:
1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹ = 31 electrons
or we can write : [Ar] 4s² 3d¹⁰ 4p¹
Name five elements of the Periodic Table and name three properties for each element listed. For example, Oxygen: polarity.
What is Chlorofluorocarbons?
Answer:
Chlorofluorocarbons and hydrochlorofluorocarbons are fully or partly halogenated paraffin hydrocarbons that contain only carbon, hydrogen, chlorine, and fluorine, produced as volatile derivative of methane, ethane, and propane. They are also commonly known by the DuPont brand name Freon.
Explanation:
Answer:
Explanation: Chlorofluorocarbons and hydrochlorofluorocarbons are fully or partly halogenated paraffin hydrocarbons that contain only carbon, hydrogen, chlorine, and fluorine, produced as volatile derivative of methane, ethane, and propane. They are also commonly known by the DuPont brand name Freon
hope that helps.↑density of a piece of wood that has a measurement of 24 cm3 and 768 g
Answer:
The answer is 32 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 768 g
volume = 24 cm³
We have
[tex]density = \frac{768}{24} \\ [/tex]
We have the final answer as
32 g/cm³Hope this helps you
Answer:
The density of wood is 32 g/cm³.
Explanation:
Given data:
Mass of wood = 768 g
Volume of wood = 24 cm³
Density of wood = ?
Solution:
Density is equal to the mass divided by its volume.
Formula:
d = m/v
d = density
m = mass
v = volume
d = 768 g/ 24 cm³
d = 32 g/cm³
The density of wood is 32 g/cm³.
Please Helpp
Which organelle is correctly matched with the cell process it performs?
A Vacuole — photosynthesis in plant leaf tissue
B Chloroplast — water storage in plant leaf tissue
C Mitochondria — energy production in plant and animal tissue
D Cell wall — supporting the cell in animal tissue
Answer:
Mitochondria - energy production in plant and animal tissue
Explanation:
The mitochondria is the power house of a cell. it contains adenosine-tri- phosphate or ATP molecules that produce energy through active transport. The mitochondria is responsible for energy production in both plant and animal cells
the number of moles in 4.5 x 10^24 atoms of oxegen is
Answer:
The answer is 7.48 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{4.5 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 7.47508...[/tex]
We have the final answer as
7.48 molesHope this helps you
Which phrase describes density?
O height of a point above sea level
O force pushing on an area or a surface
O amount of mass in a certain volume
O amount of matter an object contains
Answer:
C: amount of mass in a certain volume
Explanation:
Just took the quiz and got 100%
Which non-metal have lustre in the following 1. Iodine 2. Chlorine 3. Carbon 4. Silicon
Answer:
Iodine
Explanation:
I hope this answer will help you
Answer:
silicon. ?
Explanation:
lmk if its right.
An 8th grade goes to a restaurant for dinner with their family. At dinner, the student orders iced tea. The ice and tea combined to weigh 210 grams. The student then added sugar and lemon to their tea. The sugar weighed 20 grams and the lemon weighed 15 grams. After adding the sugar and lemon, the student stated the tea weighs 225 (210 grams ice & tea + 15 grams lemon) grams since only the lemon would add weight to the tea because the sugar was dissolved. Do you agree or disagree with the statement? Justify your choice.
Answer:
Disagree, the total mass is 245 grams.
Explanation:
We need to keep in mind the Law of Conservation of Mass. Each gram added to the lemonade (a system) will remain there unless it is somehow removed. The added mass of both sugar and lemon count for the total mass (210+20+15), even if the sugar was dissolved.
How many grams are in 2.75 moles of Calcium
Answer:
110.21 g/mol
............................
Answer:
110.22 g in 2.75 moles of calcium
Explanation:
to convert moles to grams
moles (g/mol)
2.75 mol Ca (40.08 (atomic weight) g Ca/1 mol Ca)= 110.22
: Question List
Question 9 of 15
Total Points: 1 out of 15
The configuration notation shown is for the the element
?
1s^2 2s^2 2p^6 3s² 3p 4s^1
calcium
magnesium
potassium
sodium
Radio waves are primarily used to
Answer:
Radio is used primarily for communications including voice, data and entertainment media.
A lump of chromium (Cr) has a specific heat of 0.448J/g℃. It is heated to a temperature of 89.5℃ and placed into a calorimeter with 75.2 mL of water at 20.5℃. After stirring, the final temperature of the water, Cr metal, and calorimeter is 27.4℃. What is the mass of Cr metal?
Answer:
Mass of Cr= 78 g
Explanation:
Given data:
Specific heat of Cr = 0.448 j/g.°C
Initial temperature of Cr lump = 89.5°C
Mass of water = 75.2 mL or 75.2 g
Initial temperature of water = 20.5°C
Final temperature of water = 27.4°C
Mass of Cr = ?
Solution:
when we placed the lump of Cr metal into water heat lost by limp is equal to the heat gain by water.
Specific heat capacity of water is 4.184 j/g.°C
Q = mcΔT
Q = 75.2 g× 4.184 j/g.°C × (27.4°C - 20.5°C)
Q = 2171 J
Heat lost by Cr lump is -2171 J. Now we will calculate the mass of Cr.
Q = mcΔT
-2171 J = m ×0.448 j/g.°C × ( 27.4°C- 89.5°C)
-2171 J = m × -27.821 j/g
m = -2171 J/-27.821 j/g
m = 78 g
HELP ME PLEASE WILL MARK BRAINLIEST! DUE AT 8PM TODAY1. What is the unit of measure for the graduated cylinder? What is the maximum it can measure? What is the minimum measurement?
2. Look at the smallest division on the graduated cylinder. What amount does the smallest division measure?
3.
What are the units of measure on the plastic cup? What is the maximum amount it can measure? What is the minimum measurement?
Answer:
1. Is fortnite travis scott burger
2. Beetlejuice the second
3. The measurement is 69420
Explanation:
my mom told me
Please help!
We are doing a lab and I have trouble doing the data analysis. Using my data collection, Can you guys help me using the MC delta T equation?
4.94 x c . (Tm-23.6)=C.(23-6-21.9)+123.13 x c. (23.6-21.9)
Further explanationThe law of conservation of energy can be applied to heat changes, ie the heat received/absorbed is the same as the heat released
Q in = Q out
Heat can be calculated using the formula:
Q = mc∆T
A calorimeter is a device used to measure the specific heat of material
A metal is put into a calorimeter that contains water and there will be heat transfer:
[tex]\tt \displaystyle m_mc_m (T_m-T)=m_wc_w(T-Tw)[/tex]
m = metal
w = water
T = the final temperature of the mixture
mass of metal =(Nickel) = 4.94 g
mass of calorimeter = 12.5 g
mass of water = 123.13 g (135.63 - 12.5)
The equation
Q released (metal) = Q absorbed(calorimeter+water)
Qmetal = 4.94 x c . (Tm-23.60)Q calorimeter = C.(23-6-21.9) --> C = heat capacity of calorimeterQ water = 123.13 x c. (23.6-21.9)The equation :
4.94 x c . (Tm-23.6)=C.(23-6-21.9)+123.13 x c. (23.6-21.9)
If the mass of the reactants in the chemical reaction was 25.3 grams, what was the mass of the products
Answer:
5
Explanation:
5
How many hydrogen atoms are in 2h2+02—2h20?
Answer: Two hydrogen atoms
Explanation:
A water molecule (formally known as dihydrogen monoxide) is composed of two hydrogen atoms and one oxygen atom. But you can't simply take two hydrogen atoms and stick them onto an oxygen atom. The actual reaction to make water is a bit more complicated: 2H2 + O2 = 2H2O + Energy.
Un estudiante preparo 200 ml de solución de acetato de potasio (CH3COOH ; Masa molar = 98 g/mol ; Ka CH3COOH = 1,8 x 10-5), disolviendo 3,5 g de ácido, la que denomino "Solución A". Posteriormente preparo otra solución de menor concentración del mismo soluto que denomino "solución B" y para ello tomo un volumen de 5,5 ml de la solución A y agrego agua hasta 70 ml de solución. Señale el pH de solución A y B y, la concentración molar de CH3COO- en la solución b.
Answer:
mirar respuesta abajo
Explanation:
Muy bien. Antes de responder lo que piden en el problema, vamos a calcular la concentración inicial de la solución A:
1) Concentración de la solución A:
En este caso, se sabe que se usaron 3,5 g de la sal, se puede calcular los moles usando el peso molecular y la masa:
n = m/PM (1)
Aplicando tenemos:
n = 3,5 / 98 = 0,0357 moles
Conociendo los moles, podemos calcular la concentración:
M = n/V (2)
Aplicando la formula tenemos:
M = 0.0357 / 0.200 = 0.1785 M
Esta es la concentración del ácido etiquetado como "Solución A".
Ahora podemos ver la concentración de la solución B, para luego calcular las concentraciones molares de los iones en solución y sus respectivos pH.
2) Concentración del ácido en la solución B:
Con la concentración de "A", se puede determinar la concentración de la solución B. Aqui podemos esperar que sea un valor mas bajo, puesto que es una dilución la que estamos haciendo. Por lo tanto.
Si se toma 5.5 mL de la solución A, entonces:
n = 0.1785 * 0.0055 = 0.00098 moles
Con esto, se calcula la nueva concentración:
M = 0.00098 / 0.070 = 0.014 M
Esta es la concentración de la solución B. Ahora para calcular pH y concentraciones de los iones en equilibrio, hay que plantear la reacción acido base en equilibrio. Como es el mismo compuesto, usaremos la misma ecuación.
3) pH de las soluciones A y B:
Planteamos la reacción de equilibrio:
CH₃COO⁻ + H₂O <------> CH₃COOH + OH⁻ Kb
Calculando el Kb, sería asi:
Kb = Kw/Ka
Kb = 1x10⁻¹⁴ / 1.8x10⁻⁵ = 5.56x10⁻¹⁰
Ahora reescribimos la ecuación y hacemos una tabla de equilibrio:
CH₃COO⁻ + H₂O <------> CH₃COOH + OH⁻ Kb = 5.56x10⁻¹⁰
i) 0.1785 x x
eq) 0.1785-x x x
Kb = [OH⁻] [CH₃COOH] / [CH₃COO⁻]
Reemplazando nos queda:
5.56 * 10⁻¹⁰ = x² / (0.1785-x)
Y como Kb es muy pequeño, se asume que el valor de x será también pequeño, asi que podemos redondear la resta a simplemente 0.1785, quedando tan solo:
5.56 * 10⁻¹⁰ = x² / (0.1785)
x² = 5.56*10⁻¹⁰ * 0.1785
x = √9.9246*10⁻¹¹
x = 9.96*10⁻⁶ M
Esta es la concentración de [OH⁻] y [CH₃COO⁻] en la solución A.
Aplicando lo mismo para la solución B (Cambiando solo el dato de concentración) nos queda:
x = √5.56*10⁻¹⁰ * 0.014
x = 2.79x10⁻⁶ M = [OH⁻] = [CH₃COO⁻]Finalmente, para calcular pH, se calcula primero el pOH y luego el pH:
pH = 14 - pOH
pOH = -log[OH⁻]
Para la solución A:
pOH = -log(9.96*10⁻⁶) = 5
pH = 14 - 5
pH = 9En el caso de la solución B:
pOH = -log(2.79*10⁻⁶) = 5.55
pH = 14 - 5.55
pH = 8.45Espero te ayude
The density of a liquid substance is 0.95 g/mL. Three students calculated the density as 0.56 g/mL. Calculate the percent
error.
Answer:
The answer is 41.05 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question we have
actual number = 0.95 g/mL
error = 0.95 - 0.56 = 0.39
We have
[tex]p(\%) = \frac{0.39}{0.95} \times 100 \\ = 41.0526315...[/tex]
We have the final answer as
41.05 %Hope this helps you
A 5 milliliter sample of water has a mass of 5 grams. What is the density of water?
Which two elements have similar characteristic
Answer:
Ca and Ba
Explanation:
Mainly because both Ca and Ba are able to form ionic bonds also both Ba and Ca are earth, in that case they have similar characteristics
Using the balanced equation below,
how many grams of cesium xenon
heptafluoride would be produced
from the complete reaction of 37.8 g
cesium fluoride?
CsF + XeF6 => CsXeF7
Answer:
Mass of CsXeF₇ = 99.3 g
Explanation:
Given data:
Mass of CsF = 37.8 g
Mass of CsXeF₇ produced = ?
Solution:
Balance chemical equation:
CsF + XeF₆ → CsXeF₇
Number of moles of CsF:
Number of moles = mass/molar mass
Number of moles = 37.8 g/ 152 g/mol
Number of moles = 0.25 mol
Now we will compare the moles of CsF with CsXeF₇ from balance chemical equation:
CsF : CsXeF₇
1 : 1
0.25 : 0.25
Mass of CsXeF₇ :
Mass = number of moles × molar mass
Number of moles = 0.25 mol × 397.2 g/mol
Mass = 99.3 g
Answer:
98.84
Explanation:
A student submits the following work on the mass number, but he has made a few mistakes. Select the sentences that are incorrect.
Calculating the mass number for an atom requires that we know the atomic number and the number of protons in the atom’s nucleus. The mass number then gives us the average weight of atoms of a given element. Specifically, these units are calibrated by setting the mass number for carbon-12 as 12 atomic mass units. Neutrons and protons have the same masses. However, as long as the number of protons equals the number of neutrons, the values balance out and we always obtain a whole number for the mass number.
Answer
Calculating the mass number for an atom requires that we know the atomic number and the number of protons in the atom’s nucleus. The mass number then gives us the average weight of atoms of a given element. However, as long as the number of protons equals the number of neutrons, the values balance out and we always obtain a whole number for the mass number.
Explanation:
those 3