A box with a weight of 25N sits on the floor. What is the maximum force that could be applied horizontally on the box before it would start to accelerate if the coefficient of friction is 0.40?

Capsule communicator or Capcom  is the only group in mission control that gets to communicate with the astronauts in space. Hence, option (B) is correct.

The capsule communicator, or Capcom, was the only voice that spoke to the astronauts during their trip to avoid any mistake. To ensure that the men in the capsule always had a familiar individual who understood their situation and could provide the information they required, Capcom was always manned by astronauts.

Both the technical control team on the ground and the astronauts in space are represented by Capcom.

Learn more about Capcom here:

https://brainly.com/question/27805681

#SPJ1

A bar magnet's magnetic field lines flow from its north pole toward its south pole, just like they do in all magnets. Field lines that begin close to a pole's edges stay nearby the bar magnet longer than those that begin closer to the pole's centre.

Because the molecules in magnets are arranged so that their electrons spin in the same direction, magnets are unique. This configuration and motion produces a magnetic force that emanates from a north- and south-seeking pole, respectively.

At the poles, it is strongest.

To know more about magnetic field visit:-

brainly.com/question/14848188

#SPJ1

Since Taylor has set this fitness goal: I will go to the YMCA and lift weights for 30 minutes every other day for the entire month of January. The option that MOST likely TRUE about this goal is option A:It is a short-term goal.

A short-term goal is a goal that can be achieved within a relatively short period of time, usually less than a year. In this case, the goal is to go to the YMCA and lift weights for 30 minutes every other day for the entire month of January.

In this case, Taylor's goal is to go to the YMCA and lift weights for 30 minutes every other day for the entire month of January. This goal is specific, as it clearly states what Taylor wants to accomplish, and it is measurable.

This goal can be achieved within the month of January and it's a specific, measurable and time-bound goal, which are characteristics of short-term goals.

Learn more about fitness goal from

https://brainly.com/question/5247727

#SPJ1

See full question below

Taylor has set this fitness goal: I will go to the YMCA and lift weights for 30 minutes every other day for the entire month of January. What is MOST likely TRUE about this goal?

It is a short-term goal.

It is a long-term goal.

It is an unrealistic goal.

It is a mental health goal.

Answer:it’s a short-term goal

Explanation:

because it’s only for the month of January she will be doing this goal.

The magnitude of the minimum force needed to move the wagons from rest is 474320 N

We have come to know that the force and coefficient of friction have a simple relationship as shown by the equation below:

Frictional force (N) = coefficient of friction (μ) × normal reaction (N)

F = μN

Applying the above formula, we can determine the force needed to move the wagons from rest. Details below:

F = μN

F = 0.220 × 2156000

F = 474320 N

Thus, the force needed is 474320 N

Learn more about force:

https://brainly.com/question/12163222

#SPJ1

Answer:

Newton's first law, also known as the law of inertia, states that an object will remain at rest or in motion at a constant velocity unless acted upon by an external force. In other words, an object will not change its velocity on its own, it will only do so if something else pushes or pulls on it. This law is a fundamental principle of classical mechanics, and it helps to explain the behavior of objects under various conditions.

Explanation:

Answer: Newton first law states that an object at rest tends to stay at rest. an object in motion tends to stay in motion in a straight line at a constant speed until another force acts on the object.  It is also called the law of inertia

Explanation: Newton’s first law states that if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.

Hope this was helful

The nodal voltage is V and the currents are as defined in the diagram.

At the upper node, Kirchhoff's current law equation is  I1+I5=I2+I3

To learn more about Kirchhoff's rules refers to:

brainly.com/question/13201349

#SPJ1

Answer:

800J

Explanation:

W = Fs, Work equals force times displacement

in this case, the force is 400N and the displacement is 2 meters.

The regular SI unit for work is joules

In the given image A. load, B. fulcrum, C. effort. 1st class. The correct option is B.

The pivotal point of the beam is known as the fulcrum. A load is applied at the other end of a lever when an effort is exerted to one end of the lever. A mass will be raised as a result.

The fulcrum of first-class levers is in the centre. Levers of the second class have the load in the centre.

This indicates that a heavy load can be moved with only moderate effort. - Levers of the third class exert middle-of-the-road force.

The illustration shows a class 1 lever with a fulcrum in the middle and load and effort located at the other two ends.

Thus, the correct option is B.

For more details regarding fulcrum, visit:

https://brainly.com/question/3445140

#SPJ1

The potential energy of a rock of mass 500 g, held at a height of 2 m above ground is 9.8J.

The formula for the gravitational potential energy of an object is:

PE = mgh

where m is the mass of the object, g is the acceleration due to gravity (approximately 9.8 m/s^2 on the Earth's surface), and h is the height of the object above the reference point.

So, in this case, we can plug in the given values to find the potential energy of the rock:

PE = (500 g) x (9.8 m/s^2) x (2 m)

The weight of the rock is m*g = 500 g * 9.8 m/s^2 = 4.9 N

Therefore,

PE = 4.9 N x 2 m = 9.8 J

Therefore, the potential energy of a rock of mass 500 g, held at a height of 2 m above ground is 9.8J.

Learn more about Energy:

https://brainly.com/question/29979940

Answer:

b> infinity

Explanation:

i think b is the correct one

Answer:

(B) Infinity

Explanation:

Gravity can basically never become zero except hypothetically at infinity.

The magnetic field strength of the solenoid of radius 2 m is 2.0096 T.

Magnetic field is the region or space around which magnetic force is felt or experienced.

To calculate the magnetic field strength inside a solenoid, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the magnetic field strength is 2.0096 T.

Learn more about magnetic field here: https://brainly.com/question/26257705

#SPJ1

The two charges, each of magnitude 6.0 μC, exert a force of 0.70 N at separation  of 1.47 meters.

Electric force is the attracting or repulsive interaction between any two charged things. Similar to any force, Newton's laws of motion describe how it affects the target body and how it does so. One of the many forces that affect objects is the electric force.

We know that electric force can be defined as:

Force: F = kQq/r²

0.70 = 9.0 × 10⁹ × (6.0×10⁻⁶)²/r²

r = 1.47 meter.

Hence, the separation between them is 1.47 meters.

Learn more about electric force here:

https://brainly.com/question/2526815

#SPJ1

Answer:

1.08 x 10^5 J

Explanation:

First, apply the formula V = IR , where V is the voltage, I is the current and R is the resistance.

R -> 20 ohm (Given)

I -> 3A (Given)

Hence, V = 3 x 20 = 60V (60 volts)

Next, apply the formula E = Pt , where E is the energy produced, P is the power and t is the time in seconds

Furthermore, since P = IV (power = current x voltage)

The formula can be re-expressed as E = VIt

t -> 10 minutes = 600 seconds (don't forget to convert time to seconds!)

Therefore, energy = (60 x 3 x 600) J

                              = 108000 J

                               = 1.08 x 10^5 J (in scientific notation)

Hea produced in the resistance = energy produced in the resistor

                                                      = 1.08 x 10^5 J

When two objects collide in two dimensions (for example, x and y), the momentum will be conserved separately in each direction (as long as there isn't an external impulse in that direction).

The momentum before and after a direct impact between two pieces of clay is maintained. The amount of initial kinetic energy lost during the impact as a fraction is 0.961.

The total momentum of the two objects prior to the collision equals the total momentum of the two following the collision when object 1 and object 2 collide in an isolated system. The momentum obtained by object 2 equals the momentum lost by object 1, and vice versa.

to know more about magnitude and direction here:

brainly.com/question/29766788

#SPJ1

The evaluation of the capacitor (in series) network is as follows;

Part A

Q = 3.2 μC

Part B

Q₁ = 3.2 μC

Part C

Q₂ = 3.2 μC

Part D

U = 76.8 μJ

Part E

U₁ = 34 2/15 μJ

Part F

U₂ = 53 1/3 μJ

Part G

V₁ = 21 1/3 V

Part H

V₂ = 26 2/3 V

A capacitor consists of pairs of conductors separated by insulators. Capacitors are used to store electric charge.

The specified parameters are;

The voltage across ab = 48 V

The capacitance of the first capacitor, C₁ = 150 nF

Capacitance of the second capacitor, C₂ = 120 nF

Part A

The total charge in a capacitor network can be found as follows;

[tex]C_{eq} = \left(\dfrac{1}{150} + \dfrac{1}{120} \right)^{-1} nF = \left(\dfrac{3}{200} \right)^{-1}nF[/tex]

[tex]C_{eq} =\left(\dfrac{3}{200} \right)^{-1}nF=66\frac{2}{3} \, nF[/tex]

[tex]Q_{eq} = C_{eq}\times V_{ab}[/tex]

Therefore;

[tex]Q_{eq}[/tex] = 66 2/3 nF × 48 V = 3,200 × 10⁻⁹ C = 3.2 μC

Part B

The charge in the 150 nF capacitor is obtained from the formula for the charge in a capacitor; Q = C × V as follows;

Q = C₁V₁ = C₂V₂

The charge in the capacitors, C₁ and C₂ are the same as the total charge of 3.2 μC

The charge, Q₁ on the 150 nF capacitor, C₁ is therefore, 3.2 nC

Part C

The capacitors, C₁ and C₂ are in series, therefore, the charge in each capacitor is equivalent to the charge in the circuit, which is 3.2 μC.

Therefore, the charge, Q₂, in the 120 nF capacitor, C₂ is 3.2 μC

Q₂ = 3.2 μF

Part D

The total energy stored in the network can be obtained using the formula;

U = (1/2)·C·V²

Where;

U = The energy in the capacitor

C = The equivalent capacitance of the network = 66 2/3 nF

V = The voltage

Therefore;

[tex]U = \dfrac{1}{2} \times C_{eq}\times V^2[/tex]

[tex]U = \dfrac{1}{2} \times 66\frac{2}{3} \times 10^{-9}\times 48^2 = 76.8[/tex]

Part E

The energy stored in the 150 nF capacitor is found as follows;

[tex]Q_{eq}[/tex] = Q₁ = C₁ × V₁

V₁ = [tex]Q_{eq}[/tex] ÷ C₁

Therefore;

V₁ = 3.2 μC ÷ 150 nF = [tex]21\frac{1}{3}[/tex] V

U₁ = 0.5×C₁×V₁²

Part F

The energy stored in the 120 nF capacitor, U₂, can be found as follows;

V₂ = 3.2 μC ÷ 120 nF = [tex]26\frac{2}{3}[/tex] V

U₂ = 0.5 × 150 nF × [tex]\left(26\frac{2}{3} \, V\right)^2[/tex] = [tex]53\frac{1}{3}\, \mathrm{ \mu J}[/tex]

Part G;

The potential difference across the 150 nF, obtained in Part E, is 21 1/3 V

Part H

The potential difference across the 120 nF, obtained in part F, is 26 2/3 V

Learn more about capacitors networks here: https://brainly.com/question/9525710

#SPJ1

The relation between a frog's maximum height and maximum range is that when the frog jumps at an angle of 45°, its maximum height is half of the horizontal range.

The maximum height refers to the maximum vertical distance that an object can travel.

The maximum range is the maximum horizontal distance that an object can travel.

The maximum height, H that the projectile reaches when the range, R, is at its greatest is H = Rmax /4.

R = 4Hcot is the relationship between the horizontal range and maximum height.

Learn more about maximum height and maximum range​ at: https://brainly.com/question/29807776

#SPJ1

Answer:ssssw

Explanation:

The points in order of increasing value of the velocity can be ranked as:

B < C < A ≡ F < E < D.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

According to the figure:

The points in order of increasing value of the velocity can be written as:

B < C < A ≡ F < E < D.

As the displacement becomes from positive to negative near point B, it has the lowest velocity and  as the displacement becomes from negative to positive near point D, it has the highest velocity

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

I think the answer is b but im not really sure

(True) Synthetic pesticides and fertilizers were used extensively during the Green Revolution, but the negative health and environmental impacts were not well-known since the effects added up over time.

Chemicals created by humans, synthetic pesticides are meant to kill or deter pests. They are mostly utilized in agriculture, although they are also employed in other fields of endeavor and in household settings. In the 1930s, synthetic pesticides were first used in the United States of America (USA).

Chemicals known as synthetic pesticides are employed to manage and control plant pests like weeds, insects, and/or fungal infections.

Human health problems associated with exposure to synthetic pesticides include

learn more about Synthetic pesticides here

https://brainly.com/question/28997034

#SPJ1

The initial horizontal velocity of the football if a player kicks a football from ground level with a velocity of 27/ms at an angle of 30 degrees above the horizontal is 23.662 m/s.

To find the initial horizontal velocity (Vx) of the football, you can use the horizontal component of the velocity vector. The horizontal component of velocity is found by multiplying the velocity by the cosine of the angle of launch.

[tex]V_{x}[/tex] = V × cos(angle)

where V is the initial velocity, the angle is the angle of launch (in this case, 30 degrees), and cos is the cosine function.

So, in this case, the initial horizontal velocity of the football would be:

[tex]V_{x}[/tex] = 27 m/s × cos(30)

[tex]V_{x}[/tex] = 27 m/s × 0.866

[tex]V_{x}[/tex] = 23.662 m/s

So the initial horizontal velocity of the football, which moves in the x-direction, is approximately 23.662 m/s.

This means the football will move 23.662 m/s in x direction initially and if no air resistance acts upon the football, it will move at the same velocity in x direction throughout the motion.

Learn more about velocity :

https://brainly.com/question/28738284

To find the normal force, we can use the equation: normal force = weight + friction force * cos(incline angle).

To know more about normal force , check out :

https://brainly.com/question/15199961

#SPJ1

The maximum capillary rise of water to be expected  in the vertical glass tube is 15 mm.

The process of a liquid flowing in a small area without the aid of, or even in opposition to, any outside forces like gravity is known as capillary rise.

The effect can be observed in a biological cell, in a thin tube, in porous materials like paper and plaster, in some non-porous materials like sand, liquid carbon fiber, and some other porous materials.

The maximum capillary rise of water = 4σcosθ/ρgd

= ( 4 × 0.0733 × cos0°)/(10³ × 9.81 × 2 × 10⁻³) meter

= 0.015 meter

= 15 mm.

Learn more about capillary tube here:

https://brainly.com/question/13740803

#SPJ1

From conservation of linear momentum, the final velocity is 15.7 m/s and the time taken is 1.6 s

Velocity can be defined as a distance travel in a specific direction per time taken. It is a vector quantity.

Given that 30kg metal ball is dropped from a height of 12.5 m.  

a.  Find the final velocity when the ball  hits the ground.

The maximum K.E of the ball at it final velocity will be equal to its maximum P.E at height 12.5 m. That is,

K.E = P.E

1/2mv² = mgh

Where

Substitute all the parameters

1/2 × 30 × v² = 30 × 9.8 × 12.5

v² = 245

v = √245

v = 15.65 m/s

b. The time it takes for the ball to hit the ground can be found through

h = ut + 1/2gt²

but u = 0

h = 1/2gt²

Substitute all the necessary parameters

12.5 = 1/2 × 9.8 × t²

12.5 = 4.9t²

t² = 12.5/4.9

t² = 2.55

t = √2.55

t = 1.6 s

Therefore, the final velocity when the ball hits the ground is 15.65 m/s and the time it takes for the ball to hit the ground is 1.6 s

Learn more about Velocity here: https://brainly.com/question/24445340

#SPJ1

Time required to film something in HD to collect 1 PB of data is all day for about 3.5 years.

A petabyte, or 2 to the 50th power of a byte, is a unit of measurement for memory or data storage. One exabyte is equal to about 1,024 petabytes (PB), or 1,024 terabytes (TB).

Although traditional network-attached storage (NAS) can handle petabytes of data and is expandable, it might be resource-intensive to traverse the system's ordered storage index.

A common laptop or desktop computer has 16 GB of random access memory for storage (RAM).

Learn more about Petabytes here:

https://brainly.com/question/29060237

#SPJ1

The bullet stops moving on hitting on a surface. Hence, the impulse here is equal to the momentum. Therefore, the mass of the bullet is 0.1 Kg.

Impulse in physics is the change in momentum. It is the product of the force and change in time.

hence, impulse = f. dt

When the bullet is travelling with  a velocity of 500 m/s it has a momentum. When it brought to rest, momentum become zero. Thus, the momentum is equal to the impulse here.

Therefore, f.dt = m. v

f.dt = 50 N s

v = 500 m/s

m = 50 N s/500 m/s = 0.1 Kg

Therefore, the mass of the bullet is 0.1 Kg.

Find more on impulse:

https://brainly.com/question/904448

#SPJ1

a) The average velocity at 4s is 12 m/s

b) The instantaneous velocity at t= 6s is 12 m/s

c) The average acceleration is; 12  - 0/ 4 - 0 n= 3 m/s^2

d) The time for the race is 10 s

We know that the velocity time graph is the kind of set up that has two axis and we can be able to use it to be read off the velocity of the acceleration  of the object. I would want us to recall  that the acceleration is the rate of change of the velocity of the object with time.

Now we have that;

The graph for the velocity of the object can be obtained by looking at the image that has been shown and then we read off the points that are on the graph. The  vertical axis shows the velocity of the graph while the horizontal axis shows the time that is covered in the graph.

The acceleration would be the ratio of the change in the velocity to the change in the time of the object.

Learn more about velocity time graph:https://brainly.com/question/28357012

#SPJ1

Answer:

Explanation:

b)  Fg = W = mg = (104 kg)(9.8 m/s²) = 1019.2 N  (weight of the box)

Ff = (coeff. friction)(N)

N = normal force = Fg = 1019.2 N

c)  coeff. friction = Ff/N = 45 N/1019.2 N = 0.044

d)  Fnet = 245 N - 45 N = 200 N

It's hard to draw a free body diagram with the available symbols, but here's a try at it.  Just add a box between the arrows!

                            W

                            ↓

     Ff  →                                 ←  Fapplied

                             ↑

                             N

If atmospheric pressure is 101.3 KPa and the absolute pressure at the bottom of the tank is 231.3 KPa, the specific gravity of the olive oil is 1.30

To calculate the specific gravity, deduct the absolute pressure at the bottom of the tank (231.3 KPa) from the atmospheric pressure (101.3 KPa). This will give you a ratio of 130KPa, then divide it by the atmospheric pressure which is the specific gravity of olive oil.

Use the formula below:

specific gravity = absolute pressure - atmospheric pressure / atmospheric pressure

Specific gravity = (231.3 KPa - 101.3 KPa) / (101.3 KPa) = 1.30

Therefore, the specific gravity of the olive oil is 1.30.

learn more about absolute pressure: https://brainly.com/question/17200230

#SPJ1