The distance between the fringes (y) will decrease.
What is meant by double slit?
In the double-slit experiment, a beam of light is aimed at a barrier with two vertical slits. After the light passes through the slits, the resulting pattern is recorded on a photographic plate. When one slit is covered, a single line of light is displayed, aligned with whichever slit is open.To solve this problem it is necessary to apply the concepts related to double split conditions. The equation describing this effect is given by
dsinθ = mλ
λ = dsinθ /m
λ = wavelength
d= distance between slits
m = Any integer, representing the repetitions of the spectrum
If θ is small, then sinθ = y/L and the previous equation can be given as
λ = dy /mL
L = Length from screen with slits
y = distance between fringes
From this last equation we can realize that if the separation between the openings (d) is increased, the distance between the fringes (y) will decrease.
Learn more about double slit
brainly.com/question/16183575
#SPJ4
According to the Hubble classification scheme, an E4 galaxy has a(n) Group of answer choices irregular shape. round or spherical shape with a smooth light distribution and no disk or central bulge. disk and central bulge with a smooth light distribution and no spiral arms. moderately elliptical shape (a flattened circle) with a smooth light distribution.
According to the Hubble classification scheme, an E4 galaxy has-moderately elliptical shape (a flattened circle) with a smooth light distribution.
What does Hubble classification descrbes?Galaxies were first categorized by Edwin Hubble into four categories: spirals, barred spirals, ellipticals, and irregulars. According to the size of the central bulge and the makeup of the arms, he further divided spiral and barred spiral galaxies.A corresponds to a huge central bulge and wide central arms, while c is a modest central bulge with well-defined spiral arms. It is a common practice to categorize galaxies using the Hubble classification, sometimes known as the tuning fork diagram.A book titled "The Realm of the Nebulae" that was published in 1936 contained Hubble's original taxonomy of galaxy types. His initial plan has since undergone a number of adjustments and additions, but the fundamental concept of his "tuning fork diagram" has remained helpful for astronomers. Elliptical galaxy, which is roughly egg-shaped and lacks many features. The only thing that is typically visible is a drop in surface brightness as one moves away from the galaxy's core. The apparent shapes have long axes that are four times longer than their short axes, and range from very circular (E0) to fairly elliptical (E6).Disc galaxies feature a central bulge that resembles an elliptical galaxy very much, but they also have a thin disc of stars surrounding it. The disc typically resembles a circle quite a bit.To learn more about Galaxy click here-
https://brainly.com/question/14019621
#SPJ4
How can you determine where the wavelength released from a transition will fall in the electromagnetic spectrum?
You can change the wavelength into scientific notation and the electromagnetic spectrum will then tell you where it falls.
In physics, the wavelength is the spatial period of a periodic wave—the space over which the wave's shape repeats. It's miles the distance among consecutive corresponding points of the same section on the wave, together with two adjacent crests, troughs, or zero crossings, and is a function of each traveling wave and status wave, in addition to other spatial wave styles.
The inverse of the wavelength is referred to as the spatial frequency. Wavelength is normally designated through the Greek letter lambda (λ). The time period wavelength is also every now and then implemented to modulated waves, and to the sinusoidal envelopes of modulated waves or waves formed via interference of numerous sinusoids.
Learn more about wavelength here: https://brainly.com/question/19385753
#SPJ4
Is it possible to code the impact force using an accelerometer?
Yes, it possible to code the impact force using an accelerometer.
Accelerometers can be used to measure vibration on cars, machines, buildings, process control systems and safety installations
What is an Accelerometer ?An accelerometer is a device that measures the vibration, or acceleration of motion of a structure.
The force caused by vibration or a change in motion (acceleration) causes the mass to "squeeze" the piezoelectric material which produces an electrical charge that is proportional to the force exerted upon it.They can also be used to measure seismic activity, inclination, machine vibration, dynamic distance and speed with or without the influence of gravity.Learn more about Accelerometer meter here:
https://brainly.com/question/15185937
#SPJ4
What kind of physics is used to describe the interaction of matter and energy from the beginning of the cosmic singularity to the Planck time
Cosmology physics is used to describe the interaction of matter and energy from the beginning of the cosmic singularity to the Planck time.
Astronomy's field of cosmology examines the beginnings and development of the universe, from the Big Bang through the present and into the future. The current cosmological model for the development of the universe is the Big Bang theory, which relies on the validity of general relativity. There is a singularity there as well.
According to the Big Bang theory, the cosmos was once compressed into an infinitely small point 13.77 billion years ago. Prior to 10-43 seconds after the Big Bang, during the Planck Era, gravity, nuclear strong, nuclear weak, and electromagnetic forces are thought to have been merged into a single "super" force.
Therefore, cosmology physics is used to describe the interaction of matter and energy from the beginning of the cosmic singularity to the Planck time.
Learn more about cosmology here:
https://brainly.com/question/12950833
#SPJ4
The mass of the earth is 6x10^24 kg and that of the moon is 7.4x10^22 kg. If the radius of the moon is 1740 km, then find the value of g if the earth is compressed into the size of moon.
Answer:
In the surface of the moon, gravitational acceleration is 1.63 m/s*2.
Explanation:
An object of mass M will accelerate gravitationally at a distance R if it is at the following distance:
g = G*M/R^2
Where the gravitational constant is G.
G = 6.67*10^(-11) m^3/(kg*s^2)
At the surface of a moon, the distance between its surface and its center will be equal to its radius, since a moon's mass is concentrated at its center, thus:
R = 1740 km
It's important to remember that we need meters in order to work:
1 km = 1000 m
so:
1740 km = (1740)*1000 m = 1740000 m
R = 1740000 m
Basically, the mass consists of:
M = 7.4x10^22 kg
Incorporating all that into the gravitational acceleration equation, we get:
g = (6.67*10^(-11) m^3 / (kg*s^2))*(7.4x10^22 kg) / ( 1740000 m)^2
g = 1.63 m / s^2
In the surface of the moon, gravitational acceleration is 1.63 m / s*2.
This simulation has three parts: Intro, Compare, & Mystery.I. Explore the Intro section of this simulation.1. Based on your exploration how will you define the density D, of a substance? Writedown an algebraic expression relating D to the mass and volume of a substance.2. Does the density of a substance change with its mass? If yes, how? If no, why not?
a) Density is mass of a unit volume of a material substance
b) Algebraic expression relating Density = m / v
c) Density is an intensive property, which means the density does not change as the amount of the substance present changes
a) Density is mass of a unit volume of a material substance. The formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is the measurement of how tightly a material is packed together.
The more closely packed particles are, the more dense the object. The amount of mass in a particular space or volume. The more particles (or mass) in a given space, the more dense it is.
b) Algebraic expression relating Density = mass / volume or m/v
where d is density, M is mass, and V is volume.
c) Density (ρ) is the amount of mass (m) per unit volume (V) of a substance. Density is an intensive property, which means the density does not change as the amount of the substance present changes.
To learn more about density here
https://brainly.com/question/15164682?referrer=searchResults
#SPJ4
If we ignore lift and drag forces as the squid flies through the air, what is the maximum horizontal range that the squid can achieve before splashing down?
The speed is 42 m/s at which squid rejects the water.
The maximum horizontal range that squid can achieve is 1.25 m
What is a drag force?
Drag force is a force acting opposite to the relative motion of any object moving concerning a surrounding fluid. This exists between two fluid layers or between a fluid and a solid surface.
Here,
mass of the water, m1 = 3.0 kg
mass of the squid, m2 = 36 kg
initial speed, v2 = 3.5 m/s
(a)
According to the conservation of momentum:
m1*v1 = m2*v2
3 * v1 = 36 * 3.5
v1 = 42 m/s
It is the speed at which the squid rejects the water.
(b)
The maximum range:
R(max) = (v2) ^2 / g
where,
g=9.8 m/s^2 and launch angle is 45°
R(max) = 3.5^2 / 9.8
R(max) = 1.25 m
Hence,
The speed is 42 m/s at which squid rejects the water.
The maximum horizontal range that squid can achieve is 1.25 m
Learn more about drag force here:
https://brainly.com/question/12774964
#SPJ4
Your question is incomplete, but most probably the full question was:
We’ve seen that squid can escape from predators by ejecting water. Some squid do this at the surface of the ocean, thus launching themselves into the air—a particularly effective escape strategy. Suppose a 36 kg squid (not including water) at rest at the surface of the water brings in and quickly ejects 3.0 kg of water to achieve a takeoff speed of 3.5 m/s; these are typical numbers.
a. At what speed does the squid eject the water?
b. If we ignore lift and drag forces as the squid flies through the air, what is the maximum horizontal range that the squid can achieve before splashing down?
A 220- resistor is connected across an ac voltage source v = (150 v) sin [2pi(60 hz)t]. what is the average power delivered to this circuit?
The average power delivered to this circuit is 51.1 W.
Average power delivered to this circuit
The average power delivered to this circuit is calculated as follows;
P = v²(rms)/R
v(rms) = 0.7071v₀
where;
v₀ is peak voltagev(rms) is the root mean voltageR is resistance of the circuitSubstitute the given parameters and solve for average power
v(rms) = 0.7071v₀
v(rms) = 0.7071(150 V)
v(rms) = 106.1 V
Power = (106.1²) / (220)
Power = 51.2 W
Thus, the average power delivered to this circuit is 51.1 W.
Learn more about average power here: https://brainly.com/question/19415290
#SPJ1
What does oxygen deficit represent?
Answer: It represents a small amount of oxygen being taken into the body when the body consumes more oxygen than what is being intake
Explanation: to be deficit means the amount of something is too small and there for oxygen deficit is a too small amount of oxygen.
A 0.41 kg particle moves in an xy plane according to x(t) = - 11 + 1 t - 5 t3 and y(t) = 19 + 3 t - 9 t2, with x and y in meters and t in seconds. At t = 1.4 s, what are (a) the magnitude and (b) the angle (within (-180°, 180°] interval relative to the positive direction of the x axis) of the net force on the particle, and (c) what is the angle of the particle's direction of travel?
It looks like you're given
[tex]x(t) = -11\,\mathrm m + \left(1\dfrac{\rm m}{\rm s}\right) t - \left(5\dfrac{\rm m}{\mathrm s^3}\right) t^3[/tex]
[tex]y(t) = 19\,\mathrm m + \left(3\dfrac{\rm m}{\rm s}\right) t - \left(9\dfrac{\rm m}{\mathrm s^2}\right) t^2[/tex]
The particle's position vector at time [tex]t[/tex] is given by
[tex]\vec r(t) = x(t)\,\vec\imath + y(t)\,\vec\jmath[/tex]
Differentiate [tex]\vec r[/tex] twice to recover the velocity and acceleration vectors.
[tex]\vec a(t) = \dfrac{d\vec v(t)}{dt} = \dfrac{d^2\vec r}{dt^2} = x''(t)\,\vec\imath + y''(t)\,\vec\jmath \\\\ \implies \vec v(t) = \left(1\dfrac{\rm m}{\rm s} - \left(15\dfrac{\rm m}{\mathrm s^3}\right) t^2\right)\,\vec\imath + \left(3\dfrac{\rm m}{\rm s} - \left(18\dfrac{\rm m}{\mathrm s^2}\right) t\right) \,\vec\jmath \\\\ \implies \vec a(t) = -\left(30\dfrac{\rm m}{\mathrm s^3}\right)t \, \vec\imath - \left(18\dfrac{\rm m}{\mathrm s^2}\right) \,\vec\jmath[/tex]
At [tex]t=1.4\,\rm s[/tex], the particle has acceleration
[tex]\vec a(1.4\,\mathrm s) = \left(-42\,\vec\imath - 18\,\vec\jmath) \dfrac{\rm m}{\mathrm s^2}[/tex]
with magnitude
[tex]\|\vec a(1.4\,\mathrm s)\| = \sqrt{\left(-42\dfrac{\rm m}{\mathrm s^2}\right)^2 + \left(-18\dfrac{\rm m}{\mathrm s^2}\right)^2} \approx 45.695\dfrac{\rm m}{\mathrm s^2}[/tex]
and making an angle [tex]\theta[/tex] relative to the positive [tex]x[/tex]-axis such that
[tex]\tan(\theta) = \dfrac{-18}{-42} = \dfrac37[/tex]
Since both components of the acceleration vector have negative sign, the acceleration points into the third quadrant, so that we add a multiple of 180° after taking the inverse tangent of both sides, namely
[tex]\theta = \tan^{-1}\left(\dfrac37\right) - 180^\circ \approx -156.801^\circ[/tex]
Now, (a) the magnitude of the net force acting on the particle is, by Newton's second law,
[tex]F = (0.41\,\mathrm{kg})\|\vec a(1.4\,\mathrm s)\| \approx \boxed{18.735\,\mathrm N}[/tex]
and (b) makes the same angle as the acceleration vector, [tex]\theta \approx \boxed{-156.801^\circ}[/tex].
At this moment, its velocity vector is
[tex]\vec v(1.4\,\mathrm s) = \left(-28.4\vec\imath - 22.2\,\vec\jmath\right) \dfrac{\rm m}{\rm s}[/tex]
which (c) makes an angle [tex]\theta[/tex] such that
[tex]\tan(\theta) = \dfrac{-22.2}{-28.4} = \dfrac{111}{142}[/tex]
This vector also points in the third quadrant, so
[tex]\theta = \tan^{-1}\left(\dfrac{111}{142}\right) -180^\circ \approx \boxed{-142.986^\circ}[/tex]
A wire coil inside a generator has 150 square loops and an area equal to 0.042 m2.
The coil rotates one-quarter turn in 1.7 ms. If a 0.86 T magnetic field surrounds the
coil, what is the maximum electromotive force induced in the coil
a. 3.2 V
b. 130 V
c. 1600 V
d. 3200 V
D. The maximum electromotive force induced in the coil is determined as 3,200 V.
Maximum electromotive force induced in the coilemf(max) = NAB/t
where;
N is number of turnsB is magnetic fieldA is area of the coilt is timeSubstitute the given parameters and solve for emf
emf(max) = (150 x 0.042 x 0.86) / (1.7 x 10⁻³)
emf(max) = 3,187.1 V
emf(max) ≈ 3,200 V
Thus, the maximum electromotive force induced in the coil is determined as 3,200 V.
Learn more about emf here: https://brainly.com/question/24158806
#SPJ1
Work is best described as?
Answer:
Explanation:
In physics, work can be described as force multiplied by the displacement of the object (distance caused by the force acted on the object).
Work is a form of energy, therefore, it is measured in joules.
If Alex pushed on an object with 10N of force, and the object moved 2 meters, the work of Alex will be equal to:
W = Ft
W = 10N * 2m
W = 20 Joules
But, if we have John, that pushed on an object with 2N of force, but, since the object was way smaller, therefore it had way less inertia, the object moved a distance equal to 10 meters. Let's also calculate his work.
W = Ft
W = 2N * 10m
W = 20 Joules
And we got the same result.
Work can also be used to calculate power.
Power is equal to P = Work / time
It can also be written as P = delta Work / delta time
Power is measured in joules per second.
With power you can make the difference between someone that got a 2 kg object up in 2 second, and someone that got a 2 kg object up in 5 second.
The more powerful one would be the one who managed to make the same work in less time.
Hope it Helped!
Work is described as: the measure of energy transfer resulting from the application of force over a displacement.
What is Work?In the field of physics, work is most accurately defined as the outcome of multiplying the force exerted on an object by the distance the object is displaced in the same direction as the force.
This calculation serves to quantify the energy transferred to or from the object. For instance, if an individual applies a 50 Newton force to push a box across a 5-meter distance in the force's direction, the work done on the box would equal 250 Joules (50 N × 5 m).
Learn more about Work on:
https://brainly.com/question/14813637
#SPJ6
obtain the temperature when the degree of the celsius scale will be one fifth of the corresponding degree of the Fahrenheit scale
Heat is necessary to warm 500g of water from 20°C to 65°C is 50 Fahrenheit heat required.
What is Fahrenheit scale degree?Fahrenheit temperature scale, scale based on 32° for the freezing point of water and 212° for the boiling point of water, the interval between the two being separated into 180 equal parts.
How much heat required?Heat transfer is a specialization of thermal energy that involves the generation, use, conversion, and deal of thermal energy between physical systems.
F = 9/5 C + 32 conversion from C to F
F = 9/5 × F/5 + 32
25 F = 9 F + 800
16 F = 800
F = 50
complete answer shown below
2. How much heat is necessary to warm 500g of water from 20°C to 65°C?
Learn more about Fahrenheit temperature, refer
https://brainly.com/question/5606356
#SPJ9
Two boys with masses of 40 kg and 60 kg stand on a horizontal frictionless surface holding the ends of a light 10-m long rod. The boys pull themselves together along the rod. When they meet the 40-kg boy will have moved what distance?.
When they meet the 40-kg boy will have moved a distance of 6 m.
Displacement of the 40 kg boy
The displacement of the 40 kg boy is calculated from the principle of center mass.
X(40 kg) = (60 x 10 m + 40 x 0)/(40 kg + 60 kg)
X(40 kg) = (600)/(100) = 6 m
X(60 kg) = (60 x 0 + 40 x 10 m)/(40 kg + 60 kg)
X(60 kg) = (400)/(100) = 4 m
Thus, when they meet the 40-kg boy will have moved a distance of 6 m.
Learn more about center mass here: https://brainly.com/question/13499822
#SPJ1
The second step in converting between the mass of a compound and moles of a compound is to:________
The second step would be to divide the mass of the compound by the molar mass of the compound.
Converting mass to moleIn converting the mass of a compound to the number of moles of the same compound, one needs to divide the mass by the molar mass of the compound.
Mathematically, this is expressed as:
Number of moles of a compound = mass of the compound/molar mass of the compound.
Thus, the first step would be to calculate the molar mass of the compound from the molar weight of the atoms of elements that constitute the compound.
The second step would then be to divide the mass by the calculated molar mass in order to obtain the number of moles.
More on number of moles can be found here: https://brainly.com/question/14919968
#SPJ1
When driving in fog, A. low beam headlights. B. Use high beam headlights for better visibility. C. Use your hour at 10 second intervals. D. Turn on the heat in your vehicle.(1 Point)
The correct alternative is (a) use low beam headlights when driving in fog.
Use of low beam headlights is better than high beam headlights when driving in fog because high beams are aimed higher to maximize the seeing distance and their bright light doesn't provide the clear visibility through the fog. The high beam light bounces back and just reflect back into the eyes of driver resulting in a sharp glare making it difficult for the driver to see through the fog. Low beams are only directed sideward or downward which ensure that the light doesn't reflect back into the eyes while driving through fog. The low beam lights doesn't obscure the vision and prevent collisions by providing clear visibility through the fog.
Hence, it is a good idea to use only low beam headlights while driving through the fog to ensure the correct visibility.
Learn more about low beams here:
https://brainly.com/question/13861994
#SPJ1
How many people are allowed daily into the coyote buttes north area, which includes the wave?.
64 people are allowed daily into the coyote buttes north area, which includes the wave.
What can be seen in coyote buttes north?The Wave and other aesthetically stunning natural sandstone formations can be found in Coyote Buttes North.
Where is coyote butte north located?It is a small portion of the 112,500-acre Paria Canyon-Vermilion Cliffs Wilderness of Northern Arizona.
To enter Coyote Buttes North (The Wave) and Coyote Buttes South, you need a permission. There are only daytime permits available. Permits have a daily maximum. Coyote Buttes North (The Wave) permits are distributed via lottery.How was the wave in coyote buttes formed?
The Wave is a Navajo Sandstone formation found in the Paria Canyon-Vermilion Cliffs Wilderness of Northern Arizona. The amazing patterns in the rock here were created by the wind and erosion over millions of years.To learn more about coyote buttes north visit:
https://brainly.com/question/15392315
#SPJ4
64 people are allowed daily into the coyote buttes north area, which includes the wave.
What can be seen in coyote buttes north?The Wave and other aesthetically stunning natural sandstone formations can be found in Coyote Buttes North.
Where is coyote butte north located?
It is a small portion of the 112,500-acre Paria Canyon-Vermilion Cliffs Wilderness of Northern Arizona.
To enter Coyote Buttes North (The Wave) and Coyote Buttes South, you need a permission.
There are only daytime permits available.
Permits have a daily maximum.
Coyote Buttes North (The Wave) permits are distributed via lottery.
How was the wave in coyote buttes formed?The Wave is a Navajo Sandstone formation found in the Paria Canyon-Vermilion Cliffs Wilderness of Northern Arizona.
The amazing patterns in the rock here were created by the wind and erosion over millions of years.
To learn more about coyote buttes north visit:
brainly.com/question/15392315
#SPJ4
(a) What is the resistance of a lightbulb that uses an average power of 120 W when connected to a 60.0-Hz power source having a maximum voltage of 170 V
Resistance of a lightbulb is 240.8 ohm
Given:
Power = 120 W
Frequency = 60.0-Hz
Voltage = 170 V
To Find:
Resistance of a lightbulb
Solution: The electrical resistance of a circuit is the ratio between the voltage applied to the current flowing through it. Rearranging the above relation, R = V I. The unit of electrical resistance is ohms.
The resistance of the light bulb is given by the formula, R=V²/P
R = (170)^2/120
R = 240.8 ohm
Hence, the resistance of light bulb is R = 240.8 ohm
Learn more about Resistance here:
https://brainly.com/question/25997303
#SPJ4
A planetary nebula glows because Choose one: A. it is heating up the interstellar medium around it. B. light from the central star causes emission lines. C. fusion is happening in the nebula. D. it is hot enough to emit UV radiation.
Emission lines are created by the star in the center's brightness.
A star in this kind of nebula uses UV radiation to energise the cloud's atoms. These atoms release radiation as they revert to lower energy states. It works in a manner like to a neon light. The nebula glows as a result of this.
What is Planetary nebula ?The expelled shell of an evolved massive star is a planetary nebula.
It has a spherical shell-like shape and is made of relatively cool gas that was previously the star's outer layer. A low mass star's demise is linked to the formation of a planetary nebula. You recently reviewed 15 terms.Learn more about Planetary nebula here:
https://brainly.com/question/24690783
#SPJ4
Which element of the promotional mix is most helpful in inducing trial?
Sales Promotion, Income advertising publications to short-term and transient incentives to buy or result in trials of new items.
Sales advertising is an advertising approach in which an enterprise uses a transient campaign or provide to increase interest or demand in its service or product. There are numerous motives why a commercial enterprise may additionally choose to apply an income promotion (or 'promo'), however, the primary purpose is to reinforce income.
sales promotion is one of the elements of the promotional mix. The number one element within the promotional blend is advertising and marketing, private selling, direct marketing, and exposure/public relations.
Examples encompass contests, coupons, freebies, loss leaders, a factor of purchase shows, charges, prizes, product samples, and rebates. sales promotions may be directed at both the patron, sales group of workers, or distribution channel individuals (such as outlets).
Learn more about Sales Promotion here https://brainly.com/question/1312782
#SPJ4
A ball is dropped from the top of a building. it initially moves at 4.0 m/s. after 0.5 seconds, it moves at 3.8 m/s. what force is responsible for the slowing of the ball? air resistance gravity normal tension
Air resistance (meeting space requirements)
Answer:
air resistance or A
Explanation:
Need help asap
When heated in a flame, each element emits light that is unique to that
element. This light can be separated with a diffraction grating. Which of the
options below best explains why emission spectra occur?
A. When excited electrons return to their ground state, they emit
photons with specific wavelengths.
B. When electrons absorb energy to go into excited states, they
absorb all but the light that corresponds to the spectral lines.
C. When the elements are exposed to the flame, they undergo ad
chemical reaction that releases the specific lines of colored light.
D. When the elements are exposed to the flame, they undergo a
phase change, and the colors seen represent the element's color in
the gas phase.
2. If you want 0. 250 a (250 milliamps) to flow around a circuit with a resistance of 400 ohms, what voltage do you need?
Answer:
0.000625 V
Explanation:
The formula linking current , resistance and voltage is :
V = I/R
Voltage = Current / Resistance
Now we substitute values given in question :
Voltage = 0.250 / 400
Voltage (V) = 0.000625
Our final answer is 0.000625 V
Hope this helped and have a good day
What is the purpose of nucleophilic substitution reactions of akyly halides experiment?
The purpose of nucleophilic substitution reactions of alkyl halides experiment is to demonstrate in the laboratory setting Nucleophilic substitution reactions of alkyl halides.
In this it is been aimed to observe nucleophilic substitution reactions, SN1 and SN2 will by the addition of a solvent to mixtures of alkyl halides. In order to make this experiment effective a standard procedure is being used and noted observations while each reaction occurred.
Nucleophilic substitution reactions are an important class of reactions that allow the interconversion of functional groups. For alcohols, the range of substitution reactions possible can be increased by utilizing the tosylates (R-OTs), an alternative method of converting the -OH to a better leaving group.
To learn more about nucleophilic substitution reactions
https://brainly.com/question/7022020?referrer=searchResults
#SPJ4
Give an example of q eqluibrium in a linear motion
Answer:
What type of equilibrium? There are more types, lol.
If you want a mechanical equilibrium, then just take in consideration the uniform linear motion. The resultant of the forces is null.
An interstellar spacecraft, far from the influence of any stars or planets, is moving at high speed under the influence of fusion rockets when the engines malfunction and stop. The spacecraft will
An interstellar spacecraft, far from the influence of any stars or planets, is moving at high speed under the influence of fusion rockets when the engines malfunction and stop. The spacecraft will keep moving forever at the same speed.
What is Interstellar spacecraft:Interstellar travel refers to the idea of interstellar probes or crewed spacecraft moving between stars or planetary systems in a galaxy.
here, An interstellar spacecraft, far from the influence of any stars or planets, is moving at high speed.
According to Newton’s first law:
Newton’s first law states that, without any external force, if a body is at rest, it will remain at rest and if the body is moving with constant velocity, it will continue to do so.Since here there is no external force present,
Therefore the spacecraft will keep moving forever at the same speed.
Thus,
from the above observation we conclude that,
option (D) is correct
Learn more about Interstellar spacecraft here:
https://brainly.com/question/13644547
#SPJ4
What is the amount of charge a capacitor can store per volt of potential difference?
A) permittivity
B) dielectric constant
C) capacitance
D) electric potential energy
Capacitance is the amount of charge a capacitor can store per volt of potential difference.
What is capacitance?Capacitance is defined as the capacitors ability to store an electrical charge on its plates. Capacitance is derived from capacity which means ability to store.
So we can conclude that Capacitance is the amount of charge a capacitor can store per volt of potential difference.
Learn more about charge here: https://brainly.com/question/25923373
#SPJ1
The amount of charge a capacitor can store per volt of potential difference is called the capacitance of the capacitor.
What is the capacitance?The capacitance has to do with the amount of charge that is stored by a capacitor. We know that a capacitor is a device that can be used to store electric charges. We have in it, two capacitors separated by a dielectric material.
Hence, the amount of charge a capacitor can store per volt of potential difference is called the capacitance of the capacitor.
Learn more about capacitor:https://brainly.com/question/17176550
#SPJ1
Which of newton's three laws is the hardest to describe or explain when viewing common occurrences?
Newton's second law is the hardest to describe as it is about momentum (F = ma), and a lot of people don't know the concept of momentum.
Newton's first law of motion:- every object moves in a straight line unless acted upon by a force.
Newton's 2nd law of motion:-the acceleration of an object is directly proportional to the net force exerted and inversely proportional to the item's mass. Newton's 2nd law is a quantitative description of the changes that a force can produce on the motion of a body. It states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.
Newton's 3rd law of motion:- For every action, there's an equal and opposite reaction.
learn more about Newton's first law of motion here https://brainly.com/question/10454047
#SPJ4
Tina is singing a song. At a certain point in the song, she forces a large volume of air out of the glottis and at the same time increases the tension on her vocal cords. The sound that she produces is
The sound that Tina produces while singing is loud and high-pitched.
How is a sound produced?
Vibrations that travel through the air or another medium and can be heard by an observer are called sounds. Sound is produced by the following cycle:
A column of air in the lungs leads to the opening of the bottom section of vocal folds. It then continues to move upwards towards the top of the vocal folds and escapes out. This causes Bernoulli's effect, that is as low pressure gets created behind the fast-moving air column, the bottom section of the vocal folds closes, followed by the top. The air gets cut off due to the closure of the vocal folds which releases a pulse of air and the cycle continues.Therefore, when Tina sings larger vibrations are created, and the tension within her vocal cords increases producing a very high-pitched loud sound.
Learn more about the sound here:
https://brainly.com/question/20999521
#SPJ4
Which one of the following aqueous solutions would you expect to have the smallest conductance: _______
(a) 0. 060 m nacl,
(b) 0. 030 m nacl, or
(c) 0. 015 m nacl? explain your reasoning
(c) 0. 015 m NaCl of the following aqueous solutions would be expected to have the smallest conductance.
Conductance is the expression of the ease of the passing of the electrons. Conductivity is a numerical expression of the tendency of an aqueous solution to carry an electric current. Electricity is conducted through an electrolytic solution due to the movement of ions. In general, the greater the number of ions in the solution higher is the conductance.
The conductance of a solution depends on 1) the concentration of the ions it contains, 2) on the number of charges carried by each ion, and 3) on the mobilities of these ions.
In an aqueous solution , charged particles that conduct electricity are ions , because of free ions electricity can be conducted in the solution. So , conductance depend upon concentration of the solution , more the concentration of solution more will be the conductance .
out of given solution , options a) 0.060 m solution of NaCl will be the most conducting solution as it is most concentrated option c) 0.015 m solution of NaCl will be the least conducting solution as it is the least concentrated solution .
correct option will be (c) 0. 015 m NaCl of the following aqueous solutions would be expected to have the smallest conductance.
To learn more about conductivity here
https://brainly.com/question/21496559?referrer=searchResults
#SPJ4