A parallel-plate capacitor is made from two aluminum-foil sheets, each 5.6 cm wide and 5.0 m long. Between the sheets is a Teflon strip of the same width and length that is 4.5×10−mm thick. What is the capacitance of this capacitor? (The dielectric constant of Teflon is 2.1.)

Answers

Answer 1

The capacitance of this parallel-plate capacitor is approximately 1.31 × 10^−9 Farads. The capacitance of this parallel-plate capacitor is 369 picofarads.

The capacitance of a parallel-plate capacitor is given by the equation C = εA/d, where C is capacitance, ε is the permittivity of the dielectric material, A is the area of the plates, and d is the distance between the plates. The permittivity of Teflon is 2.1 times the permittivity of free space (ε₀), so ε = 2.1ε₀.  

C = (2.1ε₀)(28 m²) / (4.5×10^-3 m)
C = 369 pF


A parallel-plate capacitor consists of two aluminum-foil sheets separated by a Teflon strip. The capacitance of this capacitor can be calculated using the formula:
C = ε₀ * εr * A / d
First, we need to convert the given dimensions to meters:
width = 5.6 cm = 0.056 m
length = 5.0 m
thickness = 4.5 × 10^−3 m
Now we can calculate the area of each aluminum-foil sheet:
A = 0.056 m * 5.0 m = 0.28 m²
Finally, we can calculate the capacitance:
C = (8.85 × 10^−12 F/m) * (2.1) * (0.28 m²) / (4.5 × 10^−3 m)
C = 1.31 × 10^−9 F

To know more about capacitance visit:-

https://brainly.com/question/28445252

#SPJ11


Related Questions

A block of mass 0.248 kg is placed on top of a light, vertical spring of force constant 5 025 N/m and pushed downward so that the spring is compressed by 0.090 m. After the block is released from rest, it travels upward and then leaves the spring. To what maximum height above the point of release does it rise

Answers

The maximum height above the point of release it rises is 8.82 m

What is spring force:

The force exerted by a spring on objects attached to its ends is proportional to the spring's change in length away from its equilibrium length.

F(spring) = k*x

here,

mass, m=0.240 kg

vertical spring constant, k = 5050 N/m

compression, x=0.090 m

When the spring is compressed, the spring potential energy is:

E = (k*x^2) / 2

substituting the values,

E = 5050* 0.090^2 / s

E = 20.91 J

This energy would be converted to kinetic, so the mass gains speed, which is then converted to gravitational potential energy once the mass reaches its highest point

E(p) = m*g*h

where, h is the maximum height

E(p) = E

m*g*h = 20.91

h = 20.91 / ( 9.8 * 0.248 )

h = 8.82 m

hence

The maximum height above the point of release is 8.82 m

Learn more about spring force here:

https://brainly.com/question/14655680

#SPJ4

A hydraulic system contains 3 pistons. The input piston has an area of 0.625 in2, one of the output pistons ( piston A ) has an unknown area and the other piston ( Output Piston ) has a diameter of 3.75 inches. If system pressure is 1,440 psi, and Piston A is supporting 20,000 lb, what is the area of Piston A

Answers

The area of Piston A is 13.88 in^2

What is a hydraulic system?

The hydraulic system functions by using pressurized fluid.  The power of liquid fuel in hydraulics is significant and as a result, they are commonly used in heavy equipment.

Hydraulic system simply means a mechanical function that operates through the force of liquid pressure.

Here

A hydraulic system contains 3 pistons.

Pressure, P = 1440 psi

for piston A:

Area, A= 0.625 in^2

Force, F = 20,000 lb

We know that,

Force = Pressure x Area

F = P x A

Area ( piston A) = F / P

A = 20,000 / 1440

A = 13.88 in^2

Hence,

The area of Piston A is 13.88 in^2

Learn more about hydraulic system here:

https://brainly.com/question/27961071

#SPJ4

One of the primary advantages of CCDs over photographic plates is the former's high efficiency in detecting light.

Answers

True

What are the advantages of CCDs over photographic plates?

In place of photographic plates or films, charge coupled devices, or CCDs, are sensitive photon detectors that can be employed in telescopes to create images. CCDs were created in the late 1960s and are now found in various devices, including digital cameras and photocopiers.

CCDs are more light-efficient, catch a greater proportion of incoming photons, can store and transfer digital data, and don't require development like film does. They respond linearly and capture up to 80% of the light that strikes them.

I understand the question you are looking for is this:

One of the primary advantages of CCDs over photographic plates is the former's high efficiency in detecting light. True or false.

Learn more about CCDs here:

https://brainly.com/question/3348477

#SPJ4

two particles each having a mass of 5g and charge of 1.0×10^-7C stay in limiting equilibrium on a horizontal table with a separation of 10cm . The coefficient of friction between them and the table is same . Find the value of this coefficient.​

Answers

The value of the coefficient  is μ=0.18.

What is meant by Friction?A force that opposes this motion of the hands is activated when they brush against one another. The frictional force is the force resisting motion that is exerted in the direction that is counter to the direction that the hands are moving, and it is what creates heat energy.The force that prevents one solid item from moving across another is known as friction. Static, sliding, rolling, and fluid friction are the four main categories of friction.Many times, the uses of friction can be understood by imagining what would happen in their absence. You wouldn't be able to walk, operate a car, or grip anything if there was no friction. Pencils and pencils wouldn't function. Using brakes on a car or bicycle to halt requires friction as well.

Find the value of this coefficient.​

The particles are in equilibrium, meaning the net force on them is zero.

Thus, repulsion due to their charge = friction due to the table.

As the equilibrium is limiting, friction reaches its maximum value.

[tex]\frac{kQ^{2} }{r^{2} }[/tex]=μmg

[tex]k=9*10^{9} Nm^{2} C^{-2}[/tex]The electrostatic constant [tex]Q=10^{-7} C[/tex]  is the charge, and r=0.1m is the distance between the charges.

[tex]\frac{(9*10^{2})(10^{-7})^{2} }{(0.1)^{2} }[/tex]=μ*[tex](5*10^{-3})(10)[/tex]

Therefore, The answer is μ=0.18.

To learn more about friction, refer to:

https://brainly.com/question/24338873

#SPJ9

Which type of motorcycle features rear-positioned footrests, high power-to-weight ratio, and a forward leaning ride

Answers

Sport-type motorcycles typically feature a higher than average power-to-weight ratio.

Sport-style motorcycles often have a power-to-weight ratio that is above average. Fuel refers to opening the fuel supply valve, if available. Set the choke and squeeze the clutch lever together is referred known as "choke and clutch." Even though some motorcycles lack a choke, the choke should be ON for a cold engine.

What is scrambler motorcycle?

Scrambler motorbikes, also referred to as dirt bikes, have special features designed for off-road activities and sports. Off-road, to be clear, is any route that isn't paved or that follows a set pattern. Scrambler bicycles feature relatively straightforward designs, long suspensions, and high ground clearance.

Learn more about Scrambler motorbikes

brainly.com/question/24915434

#SPJ4

A firm current ratio is 1. 0 and its quick ratio is 1. 0. If current liabilities are 12300, what are its inventories?

Answers

A firm current ratio is 1. 0 and its quick ratio is 1. 0. If current liabilities are 12300 then its inventories will be 12300

Inventory is the accounting of items, component parts and raw materials that a company either uses in production or sells

The quick and current ratios are liquidity ratios that help investors and analysts gauge a company's ability to meet its short-term obligations. The current ratio divides current assets by current liabilities. The quick ratio only considers highly-liquid assets or cash equivalents as part of current assets.

current ratio = current assets / current liabilities

current assets = current ratio  * current liabilities

                        = 1 * 12300 = 12300

since , inventory is a current asset for accounting purpose , hence inventories will be 12300

To learn more about current ratios

https://brainly.com/question/19579866?referrer=searchResults

#SPJ4

A bicycle with 20 -inch diameter wheels is traveling at 16 mi/h. Find the angular speed of the wheels in rad/min.

Answers

The angular speeds of the wheels is 1,647.28 rad/min

What is Angular Velocity?

angular velocity is the speed at which the angle between two bodies changes as an item rotates or revolves around an axis.

The diameter of a bicycle, d = 20inches

Radius, r = 10 inches

The bicycle is travelling at 16 mi/h.

We need to find the angular speed of the wheels in rad/min.

We know that,

1 mi/h = 0.0166667 mi/min

It means,

16 mi/h = 0.26 mi/min

Also,

10 inch = 0.0001578356 miles

The angular speeds of the wheels is given by :

v = rω

ω = v/r

ω = 0.26/0.0001578356

ω = 1,647.28 rad/min

So, the angular speeds of the wheels is 1,647.28 rad/min

to learn more about Angular Velocity go to - https://brainly.com/question/20432894

#SPJ4

Rewrite the following sentence in the negative form >Each library contains 3000 brand new books

Answers

None of the libraries have up to 3000 brand new books

What is the tangential speed of a lug nut on a wheel of a car if the lug nut is located 0.114 m from the axis of rotation; and the wheel is rotating at 6.53 rev/sec

Answers

The tangential speed of a lug nut on a wheel of a car will be 4.68 m/s

Given:

Distance of lug nut = 0.114 m

wheel is rotating at speed = 6.53 rev/sec

To Find:

tangential speed of a lug nut

Solution: Tangential velocity is the linear speed of any object moving along a circular path. A point on the outside edge of a turntable moves a greater distance in one complete rotation than a point near to the center

Vr = r.ω

(0114 m)(41.03 rad/s) = Vr

Vr = 4.68 m/s

Hence, tangential speed of lug nut on wheel of car is 4.68 m/s

Learn more about Tangential speed here:

https://brainly.com/question/19660334

#SPJ4

Consider two celestial objects with masses m1 and m2 with a separation distance between their centers r. If the first mass m1 were to double and the second mass m2 were to triple, what would happen to the magnitude of the force of attraction

Answers

The new magnitude of the force of attraction will be 6 times the original force of attraction

How to determine the initial force Mass 1 = m₁Mass 2 = m₂ Gravitational constant = GDistance apart = rInitial force (F₁) = ?

F = Gm₁m₂ / r²

F₁ = Gm₁m₂ / r²

How to determine the new force Mass 1 = 2m₁Mass 2 = 3m₂ Gravitational constant = GDistance apart (r) = rNew force (F₂) =?

F = Gm₁m₂ / r²

F₂ = G × 2m₁ × 3m₂ / r²

F₂ = 6Gm₁m₂ / r²

But

F₁ = Gm₁m₂ / r²

Therefore

F₂ = 6Gm₁m₂ / r²

F₂ = 6F₁

Thus, the new magnitude of the force of attraction will be 6 times the original force of attraction

Learn more about gravitational force:

https://brainly.com/question/21500344

#SPJ1

When starting a foot race, a 64 kilogram sprinter exerts an average force of 693 newtons backward on the ground for 0.59 seconds. how far does he travel in meters during this time?

Answers

The distance traveled by the sprinter in meters is determined as 1.88 m.

Acceleration of the sprinter

The acceleration of the sprinter is the rate of change of velocity of the sprinter with time.

The acceleration of the sprinter is calculated as follows;

Apply Newton's second law of motion as follows;

F = ma

a = F/m

where;

F is the applied force by the sprinterm is mass of the sprintera is acceleration of the sprinter

a = 693 N / 64 kg

a = 10.83 m/s²

Distance traveled by the sprinter

The distance traveled by the sprinter is calculated as follows;

s = ut + ¹/₂at²

where;

u is initial velocity = 0

s = ¹/₂at²

where;

t is time of motiona is acceleration

s = (0.5)(10.83)(0.59²)

s = 1.88 m

Thus, the distance traveled by the sprinter in meters is determined as 1.88 m.

Learn more about distance here: https://brainly.com/question/2854969

#SPJ1

Consider the following forces. (1) frictional (2) gravitational (3) tension (4) strong nuclear (5) normal (6) electroweak which of the forces listed are considered fundamental forces?

Answers

The forces listed are considered fundamental forces (2) gravitational (4) strong nuclear (6) electroweak.

Fundamental force, also called fundamental interaction, in physics, is any of the four primary forces—gravitational, electromagnetic, sturdy, and weak—that govern how gadgets or particles interact and how certain particles decay. All of the regarded forces of nature may be traced to those essential forces.

Now, physicists say they have discovered viable symptoms of a fifth essential force of nature. The findings come from studies performed at a laboratory near Chicago. The four fundamental forces govern how all of the objects and particles inside the Universe engage with each other.

The strong nuclear pressure pulled definitely and negatively charged quarks collectively to form undoubtedly charged protons and neutrally charged neutrons. The strong nuclear force also binds protons and neutrons within the nucleus of atoms. The weak nuclear force enabled complicated atoms to form through nuclear fusion.

Learn more about the fundamental forces here https://brainly.com/question/910002

#SPJ4

Why is it that astronomers rely upon the 21-centimeter line associated with the spin flip in hydrogen and not the more familiar hydrogen Balmer lines to gather information from the far side of the galactic plane

Answers

Hydrogen, the element that is by far the most prevalent in the universe, exhibits radio emissions with a wavelength of 21 centimetres.

This makes it practical for using radio waves to explore space objects. An object in space emits radio waves that are more noticeable the more hydrogen it has.

What is a Galactic plane ?

The majority of a disk-shaped galaxy's mass is located on the galactic plane. The galactic poles are shown by directions that are perpendicular to the galactic plane.

The Galaxy is divided in half by the planetary plane (top and bottom). The celestial equator is at an angle of 63 degrees with the galactic plane, whereas the ecliptic is at an angle of 60 degrees.

The poles of all three coordinate systems each point in a different sky direction.

Learn more about Galactic plane here:

https://brainly.com/question/25799083

#SPJ4

The rarest type of stars are A. stars that are about 1 solar mass. B. stars that are more than 50 solar masses. C. stars that are about 10 solar masses. D. stars that are about 0.5 solar mass.

Answers

The rarest type of stars is those that are more than 50 solar masses.

How are stars categorized?

Stars are categorized on the basis of mass, spectral behavior, and temperature.

There are 7 spectral types of stars:

O-type (Blue) stars have more than 50 times the solar mass of the sun and are the rarest main sequence stars present in the universe. Their abundance is merely 0.000001% of known stars.

B-type (Blue) stars have 10 times the solar mass of the sun with a surface temperature of over 20,000 K and their abundance is 0.1% of known stars.

A-type (Blue) stars have 2 times the solar mass of the sun with a surface temperature of 8500 K. Their abundance is 0.7% of known stars.

F-type (Blue/white) stars have 1.5 times the solar mass of the sun with a surface temperature of 6500 K. Their abundance is 2% of known stars.

G-type (White/yellow) stars have 1 times the solar mass of the sun with a surface temperature of 5700 K. Their abundance is 3.5% of known stars.

K-type (Orange/red) stars have 0.7 times the solar mass of the sun with a surface temperature of 4500 K. Their abundance is 8% of known stars.

M-type (Red) stars have 0.2 times the solar mass of the sun with a surface temperature of 3200 K. Their abundance is 80% of known stars.

Thus, the rarest type of stars are the O-type stars that have more than 50 times the solar mass of the sun.

Learn more about stars here:

https://brainly.com/question/11624159

#SPJ4

What minimum volume must the slab have for a 75.0 kgkg woman to be able to stand on it without getting her feet wet

Answers

V = 0.9375 m3 is minimum volume .

What is density ?We use the word "density" to indicate how much space (or "volume") an object or substance occupies in relation to the amount of matter contained therein (its mass). Density can also be defined as the quantity of mass per unit of volume. A dense object is one that is both hefty and small.

Given,

            1000 kg/m3 = density of water

             920 kg/m3 = density of ice

BF = Woman Weight + Slab Weight

Pvg = 75 + Pvg

V = 75 kg / (1000 - 920)

V = 75 / 80

V = 0.9375 m3

Therefore, V = 0.9375 m3 is minimum volume .

Learn more about density

brainly.com/question/952755

#SPJ4

How many outer-orbital electrons are found in an atom of:a) Na?b) P?c) Br?d) I?e) Te?f) Sr?

Answers

Answer:

Na=1P=5Br=7I=7Te=6Sr=2

The requried number of outer-orbital electrons in an atom of Na is 1, P is 5, Br is 7, I is 7, Te is 6, and Sr is 2.

What is orbital?

An orbital is a region of space around the nucleus of an atom where there is a high probability of finding an electron. The electrons in an atom are arranged in specific energy levels or shells, and each shell contains one or more subshells, which in turn contain one or more orbitals.

Here,
To determine the number of outer-orbital electrons in an atom, we need to look at the position of the element in the periodic table. The number of outer-orbital electrons is equal to the group number of the element for groups 1, 2, and 13 to 18. For groups 3 to 12, we need to subtract the group number from 10.

a) Na is in group 1, so it has 1 outer-orbital electron.

b) P is in group 15, so it has 5 outer-orbital electrons.

c) Br is in group 17, so it has 7 outer-orbital electrons.

d) I is in group 17, so it has 7 outer-orbital electrons.

e) Te is in group 16, so it has 6 outer-orbital electrons.

f) Sr is in group 2, so it has 2 outer-orbital electrons.

Therefore, the number of outer-orbital electrons in an atom of Na is 1, P is 5, Br is 7, I is 7, Te is 6, and Sr is 2.

Learn more about orbital here:

https://brainly.com/question/18914648

#SPJ2

The photographer realizes that with the lens she is currently using, she can't fit the entire landscape she is trying to photograph into her picture. Should she switch to a lens with a longer or shorter focal length

Answers

She should use shorter focal length to fit the entire landscape which she is trying to photograph into her picture.

What is focal length?

The focal length is a measure of how strongly the system converges or diverges light.

A positive focal length indicates that a system converges light, while a negative focal length indicates that the system diverges light.

For a standard rectilinear lens,

FOV = 2 arctan (x/2f)

FOV ∝ 1 / f

where x is the diagonal of the film.

Focal length (f) and field of view (FOV) of a lens are inversely proportional.

From the equation we can say that,

A shorter focal length gives you a wide angle of view which allows more view to fit in the frame.

Hence,

She should use shorter focal length to fit the entire landscape which she is trying to photograph into her picture.

Learn more about focal length here

https://brainly.com/question/13885819

#SPJ4

The electric field of an atom in an ionized helium atom, the most probable distance between the nucleus and the electron is r = 26.5 x 10-12m. what is the electric field due to the nucleus at the location of the electron?

Answers

The electric field due to the nucleus at the location of the electron is 4.101 × 10¹² N/C.

Given:

Distance between the electron and nucleus, r = 26.5 × 10⁻¹² m

Charge on an electron, Q = 1.6 × 10⁻¹⁹ C

Calculation:

We know that the Helium atom (He²⁺) has an atomic number Z = 2  and an atomic mass number A = 2 ( 2 protons + 2 neutrons). Thus the charge of a helium atom can be calculated as:

Q' = +2e = 2(+1.6 × 10⁻¹⁹ C) = 3.2 × 10⁻¹⁹ C

We know that the electric field on charge Q due to the nucleus is given as:

E = kQ' / r²

where E is the electric field

           k is Coulomb's force constant

           Q' is a  charge ona  Helium atom

           r is the separation distance between the electron and nucleus

Applying values in the above equation we get:

E = (9×10⁹ Nm²/C²) (3.2 × 10⁻¹⁹ C) / (26.5 × 10⁻¹² m)²

  = 4.101 × 10¹² N/C

Thus, the electric field on electrons due to the Helium nucleus is of magnitude 4.101 × 10¹² N/C.

Learn more about electric field here:

https://brainly.com/question/8971780

#SPJ4

If the strength of a magnetic field at B is three units the strength of the magnetic field at A is ____?

Answers

If the strength of a magnetic field at B is three units the strength of the magnetic field at A, means that point B has three times more turns as compared to point A.

How strength of the magnetic field should be increased?

We can increase the strength of the magnetic field by increasing the number of turns which increases the strength of the current flow.

So we can conclude that point B has three times more turns as compared to point A.

Learn more about magnetic field here: https://brainly.com/question/14411049

#SPJ1

A straight current-carrying wire carries a current I. If the magnetic field at a distance d from the wire has magnitude B, what is the magnitude of the magnetic field at a distance 2d from the wire

Answers

0.07  is the magnitude of the magnetic field at a distance of 2d from the wire

To learn more about the magnitude of the magnetic field please visit -
https://brainly.com/question/15232285
#SPJ4

A billiard ball at rest is struck by another billiard ball of the same mass whose speed is 6.0 m/s. After an elastic collision the striking ball goes off at an angle of 25° with respect to its original direction of motion. Find the angle the struck ball makes with this direction and the final speeds of both balls.​

Answers

The angle that the stuck ball makes with the direction of motion and the velocity of both the billiard balls are 65°, 2.6 m/s and 5.5m/s respectively.

To find the answer, we need to know about the linear momentum and angle made in elastic 2 dimensional collision.

What's the angle made by the struck billiard ball with the direction of motion of the 1st ball?In the two dimensional elastic collision between two objects, the scattered objects make 90° angle between them.So, here the angle between the two billiard balls after collision is 90°.As the one billiard ball is making 25° with the initial direction of motion, so the another struck billiard ball makes 90°-25°= 65°.

What's the conservation of linear momentum along vertical direction?Let m = mass of each billiard balls, v = velocity of scattered billiard ball, u = velocity of struck billiard ballBefore collision there's no vertical component of momentum. So it's zero.From figure, the total momentum along vertical direction is m×v×sin25°-m×u×sin65°From conservation of linear momentum,

           0= m×v×sin25°-m×u×sin65°

            v×sin25°=u×sin65°

            v= 2.1u

What's the conservation of momentum along horizontal direction as shown in figure?Total momentum before the collision along horizontal direction = m × 6 m/sFrom the figure, total momentum after collision is m×v×cos25° + m×u×cos65°So, m×6 = m×v×cos25° + m×u×cos65°

                6= 2.1u× cos25° +u×cos65°

                  = 2.33u

u = 6/2.33 = 2.6 m/sAnd v= 2.1×2.6= 5.5 m/s

Thus, we can conclude that the angle that the stuck ball makes with the direction of motion and the velocity of both the billiard balls are 65°, 2.6 m/s and 5.5m/s respectively.

Learn more about the 2 dimensional collision here:

brainly.com/question/14445985

#SPJ1

Which restricted basin has the coolest temperatures?

Answers

Hudson Bay is the  restricted basin that has the coolest temperatures

Hudson Bay is a restricted basin which  remains frozen or is dominated by ice over the summer solstice and through- out much of the high-sun season. This basin experiences a harsh continental climate.

The average annual temperature in almost the entire bay is around 0 °C (32 °F) or below. In the extreme northeast, winter temperatures average as low as −29 °C or −20.2 °F. The region of this basin has very low year-round average temperatures.

This basin starts freezing up by early November, and the northern part of the basin is typically entirely iced over by the end of the month.

correct answer is Hudson bay

learn more about basin :

https://brainly.com/question/11871406?referrer=searchResults

#SPJ4

The end point of a spring oscillates with a period of 2.0 s when a block with mass m is attached to it. When this mass is increased by 2.0 kg, the period is found to be 3.0 s. Find m.

Answers

Answer: The end point of a spring oscillates with a period of 2.0 s when a block with mass m is attached to it. When this mass is increased by 2.0 kg, the period is found to be 3.0 s.  Then the mass m is 0.625kg.

Explanation: To find the answer, we need to know more about the simple harmonic motion.

What is simple harmonic motion?A particle is said to execute SHM, if it moves to and fro about the mean position under the action of restoring force.We have the equation of time period of a SHM as,

                                          [tex]T=2\pi \sqrt{\frac{m}{k} }[/tex]

Where, m is the mass of the body and k is the spring constant.How to solve the problem?Given that,

               [tex]T_1=2s\\m_1=m\\m_2=m+2kg\\T_2=3s[/tex]

We have to find the value of m,

              [tex]T_1=2\pi \sqrt{\frac{m}{k} } \\T_2=2\pi \sqrt{\frac{m+2}{k} } \\\frac{T_1}{T_2} =\sqrt{\frac{m}{m+2} }\\\frac{2}{3} =\sqrt{\frac{m}{m+2} }\\\\[/tex]

               [tex]m=\frac{5}{8} =0.625kg[/tex]

Thus, we can conclude that, the mass m will be 0.625kg.

Learn more about simple harmonic motion here:

https://brainly.com/question/28045110

#SPJ4

On the day Harvey is to present his dissertation, he wakes up with a severe headache. During the presentation, he feels no pain in his head. Fifteen minutes after the presentation is over, Harvey becomes aware of his headache again. Harvey's experience is best explained by

Answers

Gate-control theory

What is Gate-control theory?

According to the Gate Control Theory of Pain, the spinal cord has a system that allows pain signals to be amplified in the brain before being processed at the spinal cord itself, or attenuated there. 

The mechanism that allows or prevents the passage of pain signals is known as the gate. The gate may be open or it may be closed, one of two possibilities: 

When the gate is open, pain signals can enter and are delivered to the brain, where they are perceived as pain.If the gate is closed, pain signals will be prevented from ascending to the brain and won't be felt.

The administration of a non-noxious (soothing or light rubbing) stimulus can help engage the gate control mechanism and alleviate pain in those who are exposed to painful (noxious) stimuli.

Learn more about gate-control theory here:

https://brainly.com/question/15561467

#SPJ4

we observe stars orbiting at distances of 25000 light years from the centers of galaxy x and galaxy y for this orbital distance stars in galaxy x have higher orbital speeds tan stars in galaxy y what can we conclude

Answers

Galaxy X contains more total mass within 25,000 light-years of its center than Galaxy Y.

Light-years

A light-year, a significant unit of length used to express astronomical distances, is roughly 9.46 trillion kilometers, or 5.88 trillion miles. A light-year is the distance that light travels in a vacuum in one Julian year, according to the International Astronomical Union. The name "light-year" is occasionally misunderstood as a unit of time since it contains the time measurement word "year". When expressing distances to stars and other distances on a galactic scale, the light-year is most frequently employed, especially in non-specialized situations and popular science publications. The parsec, which comes from astrometry and is the distance at which one astronomical unit subtends an angle of one second of arc, is the unit that is most frequently used in professional astronomy.

Learn more about light-years here:

https://brainly.com/question/1302132

#SPJ4

Which has a higher reduction potential — silver or iron?

Answers

Answer:

Fe

Explanation:

Dựa vào dãy hoạt động hóa học của kim loại

Intelligence test. If you get it right ,you are a critical thinker. You were in the garden,there are 34 people in the yard. You killed 30. How many people are in the garden.

Answers

The riddle is solved by knowing that there is only one person left in the garden and that is you.

How many people are in the garden?

We are told that there were a total of 34 people in the yard. We do not know if these people are in the garden or somewhere around the yard. The next information we have is that a total of 30 persons were killed.

Since you killed them in the garden, the others may still be lurking somewhere in the yard thus there is only one person left in the garden and that is you.

Learn more about solving a riddle:https://brainly.com/question/25063408

#SPJ1

A skydiver falls towards the earth. the attraction of the earth on the diver pulls the diver down. what is the reaction to this force?

Answers

There will be no reaction force acting on the object

Newton's second law is a quantitative description of the changes that a force can produce on the motion of a body. It states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.

The motion of a free falling object can be described by Newton's second law of motion,

Force (F) = mass * acceleration

a = F / m

The net external force is just the weight of the object (F = W).

Substituting into the second law equation gives:

a = W / m = m * g / m = g .

The acceleration (change of velocity) of the object then becomes the gravitational acceleration.

On freely falling body their is no normal acting on that object

hence , there will be no reaction force acting on the object

To learn more about Newton's second law here

https://brainly.com/question/13447525?referrer=searchResults

#SPJ4

The SI unit of current is the ampere, which is defined as the flow of charge in units of _____ over a period of time measured in _____.

Answers

The SI unit of current is the ampere, which is defined as the flow of charge in units of coulomb over a period of time measured in seconds.

What is Current?

Electrical charge carriers, often electrons or atoms deficient in electrons, travel as current. The capital letter I is a typical way to represent the current. The ampere, denoted by the letter A, is the common unit. An ampere is a unit of measure of the rate of electron flow or current in an electrical conductor. One coulomb of electrical charge (6.24 x 1018 charge carriers) traveling by a given place in one second is represented by one ampere of current.

Conventional current, also known as Franklin current, is thought by physicists to flow from relatively positive points to comparatively negative locations. The most prevalent charge carriers, electrons, are negatively charged. From somewhat negative to relatively good points, they move.

Learn more about current here:

https://brainly.com/question/23063355

#SPJ4

An 800-N box is pushed up an inclined plane. The plane is 4.0 m long and 2.0 m high. If it requires 3200 J of work to get the box to the top of the plane, what was the magnitude of the average friction force on the box? Group of answer choices 400 N 0 N Non-zero, but less than 400 N Greater than 400 N

Answers

The magnitude of the average friction force on the box is 400 N

What is energy conservation?

It is the principle by which the total energy remains constant in a system that is not subject to external influence.

It states that energy can neither be created nor be destroyed, It may be transformed from one form to another.

Here,

length of the plane, d = 4 m

height of the plane, h = 2 m

work done total, w = 3200 J

kinetic energy on top, KE = 0

Potential energy on top,

PE = weight x height

PE = 800 *2

PE = 1600 J

Now,

Total work done = KE + PE + W (friction)

W (friction) = 3200 - 1600

W (friction)  = 1600 J

W (friction) = F (friction) x d

F (friction) = 1600 / 4

F (friction) = 400 N

Hence,

The magnitude of the average friction force on the box is 400 N

option A is correct

Learn more about friction force here:

https://brainly.com/question/1714663

#SPJ4

Other Questions
If each of the numbers in the following data set were multiplied by 17, whatwould be the median of the data set?28, 58, 20, 14, 18, 71, 36 What are three key pieces of information that you can retrieve from the new car labels?. PLS HELP>>>look at pic Read the excerpt from Act III, scene v of Romeo and Juliet.Juliet: Madam, I am not well. Lady Capulet: Evermore weeping for your cousins death? 75What! wilt thou wash him from his grave with tears? And if thou couldst, thou couldst not make him live; Therefore, have done: some grief shows much of love; But much of grief shows still some want of wit. Which statement best describes Lady Capulets reaction to Juliet?She sympathizes with Juliets deep sorrow.She suggests that Juliets crying is excessive.She insists that Juliet express her feelings.She encourages Juliet to visit Tybalts grave. A doctor is called to see a sick child. The doctor has prior information that95% of sick children in that neighborhood have the flu, while the other 5%are sick with measles. Let F stand for an event of a child being sick with fluand M stand for an event of a child being sick with measles.A well-known symptom of measles is a rash (the event of having which isdenoted by R). P(R|M) = 0.93. However, occasionally children with flu alsodevelop rash, so that P(R|F) = 0.09.Upon examining the child, the doctorfinds a rash. What is the probability that the child has measles?0.57 0.350.650.20 Aside from neurons, epithelia are the only other tissue that can sometimes serve as? please give detailed answer of the question. Which of the following types of research asks customers to provide verbatim stories about their service encounters that are both satisfying and dissatisfying? Which of the following is considered the most likely source of cyberattacks, based on a poll of global executives, information security managers, and IT leaders A solid box is 15 cm by 10 cm by 8 cm. A new solid is formed by removing a cube 3 cm on a side from each corner of this box. What percent of the original volume is removed Evaluate your work by answering these questions: Did you draw original inferences? How did this activity help you better understand the history of the Cold War? Did you look at anything in a different way? Note what you learned and what challenged you. During gene therapy, bone marrow stem cells are removed from the individual. What must happen to those cells before they are injected back into the individual FRAME AN EQUATION AND SOLVE IT .NEED ASAP3 is added to a number and the result is multiplied by 4 to get 20. SKETCHPADQuestion 5Given AABC shown on the coordinate plane below.AA"B"C" = Ro (T(-4,3)(ABC))90Draw AA'B'C'' ifYou may use different colors for the separate transformations. Indicate your finalanswer. Feel free to use the Dynamic Geometry Tool to complete thetransformations. The ___ method takes a callback function as an argument and returns the first element in an array for which the callback function returns true. Factor completely 2x3y4 8x2y3 + 6xy2. If the reaction between H2 and I2 to form HI were at equilibrium and an additional 0.25 moles of H2 were added to the reaction, what would happen Write an essay on "The use of modern technology in education" in about 200 words. Which example from "Everyday Use" best shows the reader that Maggie is shy and not very confident?A.She stumbles along good-naturedly but can't see well.B.She has been like this, chin on chest, eyes on ground, feet in shuffle.C."Maggie's brain is like an elephant's," Wangero said, laughing.D.Maggie smiled; maybe at the sunglasses. But a real smile, not scared. I rlly need this answer quick