A triply ionized beryllium ion, (a beryllium atom with three electrons removed), behaves very much like a hydrogen atom, except that the nuclear charge is four times as great.
What is the ground-level energy of Be3+?
What is the ionization energy of Be3+?
For the hydrogen atom, the wavelength of the photon emitted in the n = 2 to n = 1 transition is 122 . What is the wavelength of the photon emitted when a Be3+ ion undergoes this transition?

According to the given statement the gas in the vessel is HCN and the molar mass is 27 g.mol-1.

To solve this problem, we need to use the ideal gas law equation, PV=nRT. We know the volume (10.0 L), temperature (100.0 °C = 373 K), pressure (1.13 atm), and we have the molar mass of the unknown gas. We can rearrange the equation to solve for n, the number of moles of gas:
n = PV/RT
Using the given values, we get:
n = (1.13 atm x 10.0 L) / (0.08206 L•atm/mol•K x 373 K)
n = 0.038 mol
Now we can use the mass of the gas (10.0 g) and the number of moles to calculate the molar mass:
molar mass = mass / moles
molar mass = 10.0 g / 0.038 mol
molar mass = 263 g/mol
Comparing this value to the given options, we see that the only gas with a molar mass close to 263 g/mol is HCN, with a molar mass of 27 g/mol. Therefore, the gas in the vessel is HCN.
To know more about ideal gas visit :

https://brainly.com/question/28257995

#SPJ11

In the given chemical equation:

2MnO4^-(aq) + 16H^+(aq) + 5Sn^2+(aq) → 2MnO2^-(aq) + 8H2O(aq) + 5Sn^4+(aq) The oxidation number of manganese (Mn) changes from +7 in MnO4^- to +4 in MnO2^-.

MnO4^- is a polyatomic ion known as permanganate ion, which has a charge of -1. The total charge on the ion is balanced by the sum of the oxidation states of its constituent atoms. Since there are four oxygen atoms with an oxidation state of -2 each, the oxidation state of Mn in MnO4^- can be calculated as follows:

-1 = oxidation state of Mn + (-2) x 4

-1 = oxidation state of Mn - 8

oxidation state of Mn = +7

Similarly, MnO2^- is a polyatomic ion known as manganate ion, which has a charge of -2. The total charge on the ion is balanced by the sum of the oxidation states of its constituent atoms. Since there are two oxygen atoms with an oxidation state of -2 each, the oxidation state of Mn in MnO2^- can be calculated as follows:

-2 = oxidation state of Mn + (-2) x 2

-2 = oxidation state of Mn - 4

oxidation state of Mn = +4

Therefore, the oxidation number of manganese changes from +7 in MnO4^- to +4 in MnO2^- in the given chemical equation.

To know more about chemical equation refer here

https://brainly.com/question/30087623#

#SPJ11

a) When a system does 41 J of work and its energy decreases by 68 J, we can use the equation:

ΔE = Q - W

where ΔE is the change in energy, Q is the heat added to the system, and W is the work done by the system.

Given that ΔE = -68 J and W = 41 J, we can rearrange the equation to solve for Q:

Q = ΔE + W

Q = (-68 J) + (41 J)

Q = -27 J

Therefore, the heat removed from the system is -27 J.

b) For a gas that releases 42 J of heat and has 111 J of work done on it, we can use the same equation:

ΔE = Q - W

Given that Q = -42 J (negative because heat is released) and W = 111 J, we can rearrange the equation to solve for ΔE:

ΔE = Q + W

ΔE = (-42 J) + (111 J)

ΔE = 69 J

Therefore, the change in energy of the gas is 69 J.

To know more about energy refer here

https://brainly.com/question/1932868#

#SPJ11

Catalase is an enzyme that regulates the decomposition of hydrogen peroxide into water and oxygen. The balanced chemical equation for this reaction is:

2 H2O2 → 2 H2O + O2

In this reaction, two molecules of hydrogen peroxide (H2O2) react to form two molecules of water (H2O) and one molecule of oxygen gas (O2). This reaction is highly exothermic, releasing a large amount of energy in the form of heat and light.

Without the presence of catalase, this reaction would occur spontaneously and release a significant amount of harmful reactive oxygen species (ROS) that could damage the cell and its components.

Catalase plays a critical role in regulating this reaction by catalyzing the breakdown of hydrogen peroxide into water and oxygen. The catalytic activity of catalase allows it to significantly increase the rate of the reaction, while at the same time reducing the harmful effects of the ROS produced during the reaction.

Specifically, catalase converts the highly reactive hydrogen peroxide molecules into water and oxygen gas through a two-step process.

In the first step, catalase binds to a molecule of hydrogen peroxide, causing it to break down into a molecule of water and an oxygen molecule that is bound to the enzyme. In the second step, the bound oxygen molecule is released from the enzyme, allowing it to react with another molecule of hydrogen peroxide and continue the cycle.

Overall, the catalytic activity of catalase allows it to efficiently and safely regulate the decomposition of hydrogen peroxide into water and oxygen gas, preventing the accumulation of harmful ROS and protecting the cell from oxidative damage.

To know more about decomposition refer here

https://brainly.com/question/8009068#

#SPJ11

The structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane can be represented as a branched hydrocarbon with a seven-carbon chain. It contains three methyl groups ([tex]CH_{3}[/tex]) attached to carbons 2, 4, and 5, and an isopropyl group ([tex]CH(CH_{3}) _{2}[/tex]) attached to carbon 4.

To draw the structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane, we start with a seven-carbon chain. The carbons are numbered consecutively, with the substituents indicated by the numbers. Starting from the main chain, we have three methyl groups (CH_{3}) attached to carbons 2, 4, and 5. This means that there are additional methyl groups branching off from these carbons.

Additionally, at carbon 4, we have an isopropyl group, also known as 1-methylethyl group (CH(CH_{3}) _{2}). The isopropyl group consists of three carbon atoms, with the central carbon attached to two methyl groups. Overall, the structure of 2,4,5-trimethyl-4-(1-methylethyl)heptane can be visualized as a complex, branched hydrocarbon with multiple methyl groups and an isopropyl group attached to a seven-carbon chain.

Learn more about hydrocarbon here: https://brainly.com/question/30666184

#SPJ11

The IUPAC name of the given structure, H3CCH2CHCH2C ketone, can be determined by following a set of rules set forth by the International Union of Pure and Applied Chemistry (IUPAC).

The first step in naming this ketone is to identify the longest carbon chain that contains the carbonyl group. In this case, the longest carbon chain contains 4 carbon atoms and includes the carbonyl group.

Next, we must number the carbon chain starting from the end closest to the carbonyl group. In this case, we number the carbon chain from the left-hand side to give us the lowest possible number for the carbonyl group.

The carbonyl group is located on the second carbon atom, so we indicate this with the suffix "-one". The prefix for the chain is "but-", since the chain contains 4 carbon atoms. The substituent on the third carbon atom is a propyl group, so we indicate this as "3-propyl". Therefore, the IUPAC name of the given structure is 3-propylbutan-2-one.

In summary, the IUPAC name of the given structure, H3CCH2CHCH2C ketone, is 3-propylbutan-2-one.

For more such questions on IUPAC

https://brainly.com/question/28872356

#SPJ11

The IUPAC name of the given structure is 4-pentanone. It is a five-carbon ketone with the carbonyl group located at the fourth carbon position.

The IUPAC nomenclature system provides a set of rules for naming organic compounds systematically. In the given structure, the longest carbon chain contains five carbons, so the parent name will be pentane. Since the ketone functional group (-C=O) is located at the second carbon position, the prefix "pentan-2-one" could be used. However, the functional group is often given the lowest possible number, so the numbering is adjusted to give the carbonyl carbon the number one position. Thus, the correct name for this compound is 4-pentanone, indicating that the ketone functional group is located at the fourth carbon position.

learn more about ketone  here:

https://brainly.com/question/4439718

#SPJ11

Statement can nuclear fission be sustained through a chain reaction is true.

Yes, nuclear fission can be sustained through a chain reaction. In a nuclear fission reaction, a heavy atomic nucleus is split into two or more lighter nuclei, releasing a large amount of energy in the process. When this process occurs, it also releases neutrons that can cause other fissions to occur. These neutrons can then go on to split other atoms, creating a chain reaction. If enough fissile material is present and conditions are right, the chain reaction can continue until all the fissile material has been used up or until the reaction is stopped by a moderator or other means. This is the principle behind nuclear power plants and nuclear weapons, both of which rely on a sustained chain reaction to produce energy or release destructive power.

To know more about nuclear fission visit:

brainly.com/question/24297620

#SPJ11

To calculate the freezing point depression of the solution, we can use the following formula:

ΔTf = Kf × m

where ΔTf is the freezing point depression, Kf is the freezing point depression constant of water (1.86 °C·kg/mol), and m is the molality of the solution, which is defined as the number of moles of solute per kilogram of solvent.

First, we need to calculate the number of moles of Na3PO4:

moles of Na3PO4 = mass / molar mass

moles of Na3PO4 = 5.55 g / 163.94 g/mol

moles of Na3PO4 = 0.0339 mol

Next, we need to calculate the mass of water in the solution:

mass of water = total mass - mass of Na3PO4

mass of water = 100.0 g - 5.55 g

mass of water = 94.45 g

Now we can calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

molality = 0.0339 mol / 0.09445 kg

molality = 0.358 mol/kg

Finally, we can calculate the freezing point depression:

ΔTf = Kf × m

ΔTf = 1.86 °C·kg/mol × 0.358 mol/kg

ΔTf = 0.666 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution will be:

freezing point of solution = 0 °C - ΔTf

freezing point of solution = 0 °C - 0.666 °C

freezing point of solution = -0.666 °C

Therefore, the freezing point of the solution is approximately -0.63 °C, which is closest to option A.

To know more about depression refer here

https://brainly.com/question/28810167#

#SPJ11

12.2 grams of magnesium can be produced by supplying 2.40 F to the electrode.

To calculate the number of grams of magnesium produced, we first need to calculate the number of moles of electrons supplied to the electrode. The half-reaction given shows that 2 moles of electrons are required to produce 1 mole of magnesium. Therefore, we need to know how many moles of electrons are supplied to the electrode.

The unit of measurement for electric charge is Coulombs (C) and the Faraday's constant is a conversion factor that relates electric charge to the number of moles of electrons. The Faraday's constant is equal to 96,485 C/mol e-.

In this case, we are given that 2.40 F (Faradays) of electric charge is supplied to the electrode. To convert Faradays to Coulombs, we can use the equation:

1 F = 96,485 C

Therefore, 2.40 F is equal to:

2.40 F * 96,485 C/F = 231,564 C

Now, we can use the Faraday's constant to calculate the number of moles of electrons as:

231,564 C / 96,485 C/mol e- = 2.4 moles of electrons

Since 2 moles of electrons are required to produce 1 mole of magnesium, we can calculate the number of moles of magnesium produced as:

2.4 moles of electrons / 2 moles of electrons per 1 mole of Mg = 1.2 moles of Mg

Finally, we can convert moles of magnesium to grams using its molar mass which is 24.31 g/mol:

1.2 moles of Mg * 24.31 g/mol = 29.172 g or 29.2 g (rounded to one decimal place)

Therefore, 29.2 grams of magnesium can be produced by supplying 2.40 F to the electrode.

To learn more about moles of electrons visit:

brainly.com/question/512038

#SPJ11

The pH and the fraction of the association of the 0.026 m NaOCl is the 10 ans 0.0035.

The chemical equation is :

NaOCl  --->  Na⁺      +  OCl⁻

0.026           0.026    0.026

OCl⁻      +    H₂O   ⇄      HOCl      +    OH⁻

0.026-x                             x                  x

The Kb is as :

Kb = 10⁻¹⁴ /  3 × 10⁻⁸

Kb = 3.3 x 10⁻⁷

x² / 0.026 - x =   3.3 x 10⁻⁷

x = 9.2 × 10⁻⁵

[OH⁻] = [HClO] = 9.2 × 10⁻⁵

[OCl⁻ ] = 0.026

pOH = -log [OH⁻]

pOH = - log (9.2 × 10⁻⁵)

pOH = 4.0

pH = 14 - 4

pH = 10

The fraction of the association is as :

α = [HOCl] / [OCl⁻ ]

α = 9.2 × 10⁻⁵ / 0.026

α = 0.0035

To learn more about pH here

https://brainly.com/question/15289714

#SPJ4

In the electron configuration of inner transition metal pr, the designation of the orbital with the highest energy is 5s.

The electron configuration of Pr is [Xe]4f³ 6s², where [Xe] represents the electron configuration of the noble gas xenon. The inner transition metals are characterized by the filling of their f-orbitals, which are located below the d-orbitals in the periodic table.

In Pr, the 4f subshell is partially filled with three electrons, and the 6s subshell is filled with two electrons. Therefore, the orbital with the highest energy is the next available orbital after 6s, which is 5p.

However, the given electron configuration includes only up to 5s, indicating that 5s is the highest energy orbital present in the configuration.

To know more about electron configuration, refer here:

https://brainly.com/question/31812229#

#SPJ11

The absorbance of the solution in a cell with a path length of 1.00 cm is 0.754.

To calculate the absorbance, we need to first find the concentration of the 1:1 Pt-Sn compound in the solution.

1. Convert masses of NH3PtCl4 and SnCl2 to moles:

NH3PtCl4: 5.2 mg = 0.0052 g; Molar mass = 267.99 g/mol

Moles of NH3PtCl4 = given weight/  mol. weight

                                = 0.0052 g / 267.99 g/mol

                                = 1.94 x 10^-5 mol

SnCl2: 2.2 mg = 0.0022 g; Molar mass = 189.60 g/mol

Moles of SnCl2 = 0.0022 g / 189.60 g/mol

                          = 1.16 x 10^-5 mol

2. Since it's a 1:1 Pt-Sn compound, the limiting reactant determines the moles of the compound formed.

In this case, SnCl2 is the limiting reactant.

Therefore, 1.16 x 10^-5 mol of the Pt-Sn compound is formed.

3. Calculate the concentration of the Pt-Sn compound:

Total volume of the solution = 100 mL + 100 mL = 200 mL = 0.2 L

Concentration = moles / volume

                        = 1.16 x 10^-5 mol / 0.2 L

                        = 5.8 x 10^-5 M

4. Use the Beer-Lambert law to calculate absorbance (A):

A = ε * c * l

A = 1.3 x 10^4 M^-1cm^-1 * 5.8 x 10^-5 M * 1.00 cm

  = 0.754

To know more about absorbance, click below.

https://brainly.com/question/23897866

#SPJ11

The estimated coefficient of viscosity of argon gas at 25°C and 1 atmosphere pressure is approximately 2.21 x 10^(-5) kg/m·s.

To estimate the coefficient of viscosity (η) of argon gas at 25°C and 1 atmosphere pressure, you can use Sutherland's formula:

η = (CT^(3/2)) / (T + S)

where:
η is the coefficient of viscosity,
C is the Sutherland constant for argon (1.458 x 10^(-6) kg/m·s·K^(1/2)),
T is the temperature in Kelvin (25°C = 298.15K), and
S is the Sutherland temperature for argon (92.3K).

Plug in the values:

η = (1.458 x 10^(-6) * (298.15^(3/2))) / (298.15 + 92.3)

After calculating, you will find that:

η ≈ 2.21 x 10^(-5) kg/m·s

So, the estimated coefficient of viscosity of argon gas at 25°C and 1 atmosphere pressure is approximately 2.21 x 10^(-5) kg/m·s.

To learn more about argon, refer below:

https://brainly.com/question/133359

#SPJ11

Acetic acid and benzyl alcohol are needed to synthesize benzyl acetate through an esterification reaction.

To synthesize benzyl acetate, you will need the carboxylic acid , acetic acid and the alcohol benzyl alcohol. Here's a step-by-step explanation:

1. Identify the carboxylic acid: Acetic acid (CH3COOH) is required for this synthesis. It contains a carboxyl group (COOH) that will react with the alcohol.

2. Identify the alcohol: Benzyl alcohol (C6H5CH2OH) is needed. It contains a hydroxyl group (OH) that will react with the carboxylic acid.

3. Perform the esterification reaction: Combine acetic acid and benzyl alcohol in the presence of an acid catalyst (such as sulfuric acid) to form benzyl acetate (C6H5CH2OOCCH3) and water as a byproduct.

In summary, acetic acid and benzyl alcohol are needed to synthesize benzyl acetate through an esterification reaction.

Learn more about carboxylic acid here,

https://brainly.com/question/26855500

#SPJ11

Metabolic transformations involve the conversion of one compound into another through a series of chemical reactions.

In order to determine whether a compound has undergone oxidation or reduction, we need to look at the changes in the oxidation state of the atoms involved.

Oxidation is the loss of electrons or an increase in oxidation state, while reduction is the gain of electrons or a decrease in oxidation state.

(a) Compound on the left: C3H8O. This compound has been transformed into C3H6O through the loss of two hydrogen atoms. This loss of hydrogen atoms is a clear indication of oxidation, as hydrogen is a reducing agent.

The balanced transformation is: C3H8O -> C3H6O + 2H+ + 2e-.

(b) Compound on the left: CH3CHO. This compound has been transformed into CH3COOH through the addition of an oxygen atom and the loss of two hydrogen atoms.

This increase in the number of oxygen atoms and the loss of hydrogen atoms are indications of oxidation.

The balanced transformation is: CH3CHO + H2O + O2 -> CH3COOH + H2O.

(c) Compound on the left: C6H12O6. This compound has been transformed into C2H5OH and CO2 through the loss of hydrogen atoms and the gain of oxygen atoms.

The loss of hydrogen atoms is a clear indication of oxidation, while the gain of oxygen atoms is a clear indication of reduction.

The balanced transformation is: C6H12O6 -> 2C2H5OH + 2CO2.

(d) Compound on the left: C5H12O. This compound has been transformed into C5H10O through the loss of two hydrogen atoms. This loss of hydrogen atoms is a clear indication of oxidation.

The balanced transformation is: C5H12O -> C5H10O + 2H+ + 2e-.

In summary, for the metabolic transformations (a) through (d), the compound on the left has undergone oxidation in all cases except for transformation (c), where it has undergone both oxidation and reduction.

By balancing each transformation, we can see that these reactions involve the transfer of electrons, which is a key feature of oxidation-reduction reactions.

To know more about Metabolic transformations refer here

https://brainly.com/question/31681301#

#SPJ11

Large-scale point sources such as fossil-fuel-fired electricity generation plant and industrial and institutional boilers or heating systems:

Carbon dioxide capture from large-scale point sources involves the separation and capture of CO2 from the flue gas emissions produced during the combustion of fossil fuels. Several capture technologies have been developed, including post-combustion, pre-combustion, and oxy-combustion.Post-combustion capture involves the separation of CO2 from the flue gas emissions after combustion has occurred. This is typically achieved through the use of solvents or membranes. Post-combustion capture is the most mature technology, and several large-scale facilities are already in operation. However, it can be energy-intensive and expensive, which can limit its widespread adoption.

To know more about adoption visit :

https://brainly.com/question/31173452

#SPJ11

The concentration of the H2SO4 solution is 0.1104 M.

To determine the concentration of the H2SO4 solution, we can use the formula:

moles of solute = moles of titrant

In this case, we have the volume and concentration of NaOH, as well as the volume of H2SO4, and we need to find the concentration of H2SO4.

First, let's find the moles of NaOH:

moles of NaOH = volume (L) × concentration (M)
moles of NaOH = 0.01377 L × 0.20 M = 0.002754 moles

Next, we need to consider the balanced chemical equation for the reaction between NaOH and H2SO4:

2NaOH + H2SO4 → Na2SO4 + 2H2O

From the balanced equation, we can see that the ratio of NaOH to H2SO4 is 2:1.

Therefore, the moles of H2SO4 is half of the moles of NaOH:

moles of H2SO4 = 0.002754 moles ÷ 2 = 0.001377 moles

Now, we can find the concentration of H2SO4:

concentration (M) = moles ÷ volume (L)
concentration (M) = 0.001377 moles ÷ 0.025 L = 0.1104 M

So, the concentration of the H2SO4 solution is 0.1104 M.

Know more about Titration here:

https://brainly.com/question/30055033

#SPJ11

The half-reaction occurring at the cathode in a galvanic cell with the overall reaction 2Fe(NO3)2(aq) + Pb(NO3)2(aq) → 2Fe(NO3)3(aq) + Pb(s) is Pb2+(aq) + 2e- → Pb(s).

In a galvanic cell, reduction occurs at the cathode, while oxidation occurs at the anode. To determine the half-reaction at the cathode, we first separate the overall reaction into its half-reactions. The two half-reactions are:

1. Fe2+(aq) → Fe3+(aq) + e- (Oxidation half-reaction)
2. Pb2+(aq) + 2e- → Pb(s) (Reduction half-reaction)

Since reduction occurs at the cathode, the half-reaction occurring at the cathode is Pb2+(aq) + 2e- → Pb(s). In this reaction, lead ions (Pb2+) in solution gain two electrons to form solid lead (Pb). The electrons are supplied by the anode, where the oxidation of iron ions (Fe2+) to form ferric ions (Fe3+) takes place.

To know more about the half-reactions visit:

https://brainly.com/question/31686034

#SPJ11

Coenzyme Q is a lipid soluble chemical within mitochondrial membranes that shuttles electrons to the electron transport chain.

It is a crucial component of the electron transport chain, which generates ATP through oxidative phosphorylation.

Coenzyme Q accepts electrons from complexes I and II of the electron transport chain and transfers them to complex III.

This transfer of electrons ultimately leads to the creation of a proton gradient across the inner mitochondrial membrane, which is then used to generate ATP.

Additionally, coenzyme Q has antioxidant properties and helps to protect cells from damage caused by reactive oxygen species.

Overall, coenzyme Q plays a critical role in cellular energy production and protection against oxidative stress.

Learn more about coenzyme at

https://brainly.com/question/28493652

#SPJ11

The complete and balance the half-reaction O₂(g) → H₂O(l) is O₂(g) + 4OH⁻(aq) + 4e⁻ → 2H₂O(l).

The half-reaction for the reduction of oxygen gas (O₂) to water (H₂O) in basic solution is:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

To balance this half-reaction, we need to add four hydroxide ions (OH⁻) to the left-hand side to balance the four electrons:

O₂(g) + 4OH-(aq) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

Next, we can cancel out the four OH⁻ ions on both sides of the equation:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

Finally, we can write the balanced half-reaction as a chemical equation, including all the phases:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq)

Overall, the balanced equation for the reaction of oxygen gas with water in basic solution would be:

O₂(g) + 2H₂O(l) + 4e⁻ -> 4OH⁻(aq) (reduction half-reaction)

2H₂O(l) -> O₂(g) + 4H⁺(aq) + 4e⁻ (oxidation half-reaction)

2H₂O(l) -> O₂(g) + 4H⁺(aq) + 4OH⁻(aq) (balanced equation)

Learn more about half-reaction: https://brainly.com/question/10668307

#SPJ11

Synthesizing alcohols from epoxides and organometallic reagents involves the opening of the epoxide ring by the organometallic reagent, resulting in the formation of a diol. The stereochemistry of the product depends on the starting materials and reaction conditions.

Epoxides are three-membered cyclic ethers that contain a ring of two carbon atoms and one oxygen atom. They are highly reactive due to the ring strain and the electron-rich oxygen atom, making them useful intermediates in organic synthesis.

Organometallic reagents are compounds that contain a metal atom covalently bonded to a carbon atom, which is usually an alkyl or aryl group. Common examples include Grignard reagents, which are formed by reacting an alkyl or aryl halide with magnesium metal in the presence of an ether solvent.

To synthesize alcohol from an epoxide and an organometallic reagent, the epoxide is first opened by the nucleophilic attack of the organometallic reagent on the less hindered carbon atom of the epoxide ring. This results in the formation of a new carbon-carbon bond and the opening of the ring, leading to the formation of a diol.

The stereochemistry of the product depends on the stereochemistry of the starting materials and the reaction conditions. If the organometallic reagent is chiral and reacts with the epoxide in a stereospecific manner, then the product will have a specific stereochemistry. However, if the reaction is not stereospecific, then the stereochemistry of the product will be a mixture of isomers.

To learn more about organometallic reagents

https://brainly.com/question/29980092

#SPJ4

For the first equation, 24.3 grams of water can be produced from 13.5 grams of [tex]C_2H_6[/tex]. For the second equation, 5.46 litres of oxygen gas is needed to produce 2.73 litres of water vapour.

In the first equation, the balanced chemical equation shows that 2 moles of [tex]C_2H_6[/tex]can produce 6 moles of [tex]H_2O[/tex]. To calculate the number of moles of water produced, we need to convert grams of [tex]C_2H_6[/tex] to moles using its molar mass. The molar mass of [tex]C_2H_6[/tex] is 30.07 g/mol. Therefore, 13.5 grams of [tex]C_2H_6[/tex] is equal to 13.5 g / 30.07 g/mol = 0.449 mol.

Using the mole ratio from the balanced equation, we can determine the number of moles of water produced. Since the mole ratio of [tex]C_2H_6[/tex] to [tex]H_2O[/tex]is 2:6, we multiply the number of moles of [tex]C_2H_6[/tex] by the ratio: 0.449 mol * (6/2) = 1.347 mol.

To convert moles of water to grams, we use the molar mass of [tex]H_2O[/tex], which is 18.015 g/mol. Therefore, 1.347 mol * 18.015 g/mol = 24.3 grams of water can be produced from 13.5 grams of [tex]C_2H_6[/tex].

For the second equation, the mole ratio between [tex]O_2[/tex] and [tex]H_2O[/tex] is 1:2 based on the balanced chemical equation. Since we have 2.73 litres of water vapour, we need to determine the number of moles of water vapour.

To convert litres of water vapour to moles, we use the ideal gas law: PV = nRT. Assuming standard temperature and pressure (STP), the volume can be directly converted to moles. Therefore, 2.73 litres of water vapour is equal to 2.73 mol.

Using the mole ratio from the balanced equation, we can determine the number of moles of oxygen gas needed. Since the mole ratio of [tex]O_2[/tex] to [tex]H_2O[/tex] is 1:2, we multiply the number of moles of water vapour by the ratio: 2.73 mol * (1/2) = 1.365 mol.

As the question asks for the volume of oxygen gas in litres, we do not need to convert moles to grams. Therefore, 1.365 litres of oxygen gas is needed to produce 2.73 litres of water vapour.

Learn more about molar mass here:

https://brainly.com/question/31545539

#SPJ11

Hi! I'd be happy to help you with this question. The reaction between aluminum (Al) and sulfuric acid (H2SO4) can be represented by the unbalanced equation:

Al(s) + H2SO4(aq) → Al2(SO4)3(aq) + H2(g)

To balance this equation, you need to ensure that there is an equal number of each element on both sides. The balanced equation is:

2Al(s) + 3H2SO4(aq) → Al2(SO4)3(aq) + 3H2(g)

This balanced equation shows that 2 moles of aluminum react with 3 moles of sulfuric acid to produce 1 mole of aluminum sulfate and 3 moles of hydrogen gas.

learn more about aluminum

https://brainly.in/question/47966774?referrer=searchResults

##SPJ11

The current passing through the resistance heater is approximately 0.970 A.

To determine the current passing through the resistance heater, we need to use the energy balance equation:

ΔU = Q - W

where ΔU is the change in internal energy of the system, Q is the heat added to the system, and W is the work done by the system. Since the piston is insulated, there is no heat transfer (Q=0), and the work done is only due to the expansion of the gas against the piston:

W = PΔV

where P is the constant pressure, and ΔV is the change in volume. Therefore, we can simplify the energy balance equation to:

ΔU = -PΔV

Assuming carbon dioxide behaves as an ideal gas, we can use the ideal gas law to determine the initial number of moles of CO2 in the cylinder:

PV = nRT

where P is the initial pressure, V is the initial volume, n is the number of moles, R is the gas constant, and T is the initial temperature. Solving for n, we get:

n = PV/RT

Substituting the given values, we get:

n = (200 kPa)(0.3 m3)/(8.314 kPa⋅L/mol⋅K)(300 K) = 0.036 mol

Since the volume is doubled, the final volume is 2 times the initial volume or 0.6 m3. Using the ideal gas law again, we can determine the final pressure:

P = nRT/V

Substituting the given values, we get:

P = (0.036 mol)(8.314 kPa⋅L/mol⋅K)(300 K)/(0.6 m3) = 110 kPa

Since the pressure is held constant, the work done by the gas is:

W = PΔV = (200 kPa)(0.6 m3 - 0.3 m3) = 60 kJ

The change in internal energy can be determined using the equation:

ΔU = ncVΔT

where cV is the molar-specific heat at constant volume, and ΔT is the temperature change. For carbon dioxide, cV = 0.718 kJ/mol⋅K. The temperature change can be determined using the equation:

PΔV = nRΔT

where R is the gas constant. Substituting the given values, we get:

ΔT = PΔV/nR = (200 kPa)(0.3 m3)/(0.036 mol)(8.314 J/mol⋅K) = 172.4 K

Therefore, the change in internal energy is:

ΔU = (0.036 mol)(0.718 kJ/mol⋅K)(172.4 K) = 4.0 kJ

Finally, we can solve for the heat added to the system using the energy balance equation:

ΔU = Q - W

Substituting the given values, we get:

4.0 kJ = Q - 60 kJ

Q = 64.0 kJ

The electrical energy supplied to the resistance heater can be determined using the equation:

E = IVt

where I is the current, V is the voltage, and t is the time. Substituting the given values, we get:

64.0 kJ = (110 V)I(10 min)(60 s/min) = 66,000 I

Therefore, the current passing through the resistance heater is:

I = 64.0 kJ / 66,000 = 0.970 A (approximately)

To learn more about heaters

https://brainly.com/question/11863285

#SPJ4

The percent oxygen in limestone is 48% and the percent carbon is 12%.

To find the percent oxygen and carbon in limestone, we need to use the formula:
% element = (mass of element / total mass of compound) x 100%
First, we need to calculate the mass of calcium in the sample:
Mass of calcium = total mass of compound - mass of oxygen - mass of carbon
Mass of calcium = 3.75 g - 1.80 g - 0.450 g
Mass of calcium = 2.52 g
Now we can calculate the percent oxygen:
% O = (1.80 g / 3.75 g) x 100%
% O = 48%
And the percent carbon:
% C = (0.450 g / 3.75 g) x 100%
% C = 12%
Therefore, the percent oxygen in limestone is 48% and the percent carbon is 12%.
To know more about limestone visit:

https://brainly.com/question/30717890

#SPJ11

To ensure that there is enough water for everyone during the seven-day journey, we need to calculate the amount of water required per person per day and then multiply it by the number of people and the number of days.

Let's assume there are "n" people in the group.

The total water required for one person per day can vary depending on factors like climate, activity level, and individual needs. On average, a person needs about 2-3 liters of water per day to stay properly hydrated.

Let's take the middle range of 2.5 liters per person per day. Multiply this by the number of people (n) to get the total water required per day for the group.

Total water required per day = 2.5 liters/person/day * n people

Now, multiply the total water required per day by the number of days (7) to get the total water required for the entire journey.

Total water required for the journey = Total water required per day * number of days

Once you have the total water required for the journey, you can check if the 150-gallon water container is sufficient.

1 gallon is equivalent to approximately 3.785 liters. Therefore, the 150-gallon water container can hold:

150 gallons * 3.785 liters/gallon = 567.75 liters

Compare the total water required for the journey with the capacity of the 150-gallon water container. If the container can hold more water than what is required, you have enough water for the journey. Otherwise, you may need to consider additional water sources or containers.

As for the 12 empty soda cans, they are not a suitable option for storing water for a journey of this length and number of people. They are not designed for long-term storage or transportation of water and may not provide an adequate volume of water. It is recommended to use appropriate water containers or bottles for storing water during the journey.

To learn more about water click here:

brainly.com/question/32195714

#SPJ11

The temperature if the volume is increased to 553 mL at 305 torr will be  189.5 K.

To solve this problem, we can use the combined gas law equation, which relates the initial and final conditions of pressure, volume, and temperature. The equation is as follows:

(P1V1/T1) = (P2V2/T2)

Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We are given that the initial conditions are:

P1 = 2.09 atm
V1 = 321 mL
T1 = 300 K

We are also given that the final conditions are:

P2 = 305 torr (which we need to convert to atm)
V2 = 553 mL

To convert torr to atm, we divide by 760 torr/atm:

305 torr ÷ 760 torr/atm = 0.4013 atm

Substituting the values into the equation, we get:

(2.09 atm)(321 mL)/(300 K) = (0.4013 atm)(553 mL)/(T2)

Simplifying the equation, we get:

T2 = (0.4013 atm)(553 mL)(300 K)/(2.09 atm)(321 mL) = 189.5 K

Therefore, the final temperature is 189.5 K.

The question could be rephrased as:

A quantity of Xe occupies 321 mL at 300 oC and 2.09 atm. What will be the temperature if the volume is increased to 553 mL at 305 torr?

1. 259 K

2. 586 K

3. 134 K

4. 189.5 K

5. 306 K

Learn more about gas law at: https://brainly.com/question/27870704

#SPJ11

[tex][Co(NH$_3$)$_3$(bipy)Br]$^{2+}$[/tex] is the complex that exhibits two geometric isomers.

[tex][Rh(bipy)(o-phen)$_2$]$^{3+}$:[/tex]

This complex has a square planar geometry due to the presence of two bidentate ligands, bipy and o-phen. Thus, it does not exhibit geometric isomerism.

[tex][Cu(NH$_3$)$_4$]$^{2+}$:[/tex]

This complex has a square planar geometry due to the presence of four ammonia ligands. Square planar complexes exhibit geometric isomerism when two identical ligands are positioned opposite to each other, which is not possible in this case since all four ligands are the same. Therefore, this complex does not exhibit geometric isomerism.

[tex][Co(NH$_3$)$_3$(bipy)Br]$^{2+}$:[/tex]

This complex has a tetrahedral geometry due to the presence of three ammonia ligands and one bipy ligand. Tetrahedral complexes exhibit geometric isomerism when two identical ligands are positioned across each other. In this case, the bipy ligand and the bromide ion can potentially be positioned across from each other, resulting in two possible isomers: a cis isomer and a trans isomer.

Learn more about geometric isomers here:

https://brainly.com/question/31744339

#SPJ11

The pH of the solution after adding 0.05 mol of NaOH is 4.17.

To solve this problem, we calculate the initial concentration of acetic acid, CH₃COOH, and acetate, CH₃COO⁻;

CH₃COOH; 0.50 M

CH₃COO⁻; 0.22 M

Next, we determine which species will react with the NaOH. Since NaOH is a strong base, it will react completely with CH₃COOH to form CH₃COO⁻ and water;

NaOH + CH₃COOH → CH₃COO⁻ + H₂O

We use the balanced equation to determine the moles of NaOH required to react completely with CH₃COOH;

1 mole CH₃COOH reacts with 1 mole NaOH

0.05 moles NaOH will react with 0.05 moles CH₃COOH

Since we started with 0.50 M CH₃COOH, we can calculate the initial moles of CH₃COOH;

Molarity = moles / volume

0.50 M = moles / 1.00 L

moles CH₃COOH = 0.50 mol

After reacting with 0.05 moles NaOH, we have:

moles CH₃COOH = 0.50 mol - 0.05 mol = 0.45 mol

moles CH₃COO⁻ = 0.05 mol

Using Henderson-Hasselbalch equation;

pH = pKa + log([CH₃COO⁻]/[CH₃COOH])

pKa for acetic acid is 4.76.

[CH₃COO⁻]/[CH₃COOH] = 0.05 mol / 0.45 mol = 0.111

pH = 4.76 + log(0.111) = 4.17

Therefore, the pH of the solution is 4.17.

To know more about acetic acid here

https://brainly.com/question/14452412

#SPJ4

The main answer to this question is that the rate of the reaction in terms of DA would be written as -1/5(d[DA]/dt) = k[A]²[B]³, where k is the rate constant, [A] and [B] are the concentrations of A and B, and d[DA]/dt is the rate of change of the concentration of DA over time.

The explanation for this answer is that DA is a product of the reaction, so its rate of change can be expressed in terms of the rate of the reaction using stoichiometry. Since 5 moles of D are produced for every 2 moles of A consumed, the rate of the reaction in terms of DA can be written as -1/5(d[DA]/dt) = d[D]/dt = 4(d[C]/dt) + 5(d[D]/dt) = 4k[A]²[B]³ + 5(d[DA]/dt), where d[D]/dt is the rate of change of the concentration of D over time, and d[C]/dt is the rate of change of the concentration of C over time. By rearranging this equation and solving for d[DA]/dt, we can obtain the main answer given above.

For more information on stoichiometry visit:

https://brainly.com/question/30215297

#SPJ11