An assembly line consists of 21 tasks grouped into 5 workstations. The sum of the 21 task times is 85 minutes. The largest assigned cycle time is 20 minutes. What is the efficiency of this line

Step-by-step explanation:

what are the given values of x ?

there is nothing visible.

and what is the function itself ? f(x) = 7x ?

it is not clear.

Answer:

* Giống nhau: đều là biểu hiện bằng tiền về lao động sống và lao động hóa trong quá trình sản xuất

* Khác nhau:

+ Về thời gian: chi phí sản xuất gắn liền với từng thời kỳ, còn giá thành sản phẩm gắn với thời hạn hoàn thành sản phẩm. ...

+ Có những chi phí được tính vào giá thành nhưng không được tính vào chi phí kỳ này.

+ Mối quan hệ chi phí và tính giá thành sản phẩm: Chi phí là cơ sở để tính giá thành, giá thành là thước đo chi phí sản xuất mà doanh nghiệp bỏ ra để có được khối lượng hoàn thành.

+ Có nhiều chi phí phát sinh trong kỳ nhưng chưa có sản phẩm hoàn thành do đó chưa có giá thành.

Step-by-step explanation:

-4x²+16x-16=0

X=2

The choose (2,0)

Answer:

x² - x - 2

Step-by-step explanation:

Since the curve cuts the x-axis at x = -1 and 2. The factors will be x+1 and x-2

Taking the product of the factors

f(x) = (x+1)(x-2)

f(x) = x² - 2x + x - 2

f(x) = x² - x - 2

Hence the required function is x² - x - 2

Answer:

I thikn the answer is B

Step-by-step explanation:

For a geometric series to diverge the absolute value of the common ratio has to be 1 or greater

Answer:

c. The data are continuous because the data can take on any value in an interval.

Step-by-step explanation:

Discrete data are those which can take up only specific values. Discrete data values may include the number of children in a particular school, the number of visitors received per day. All this values are specific and cannot just take up any number one f values within an interval. Continous data on the other hand can take up any number of data values between an interval. Continous data types are usually height temperature, length(distance data). There can be infinite number of possible data within interval values.

Answer:

a)  Z Test(n>30)

b)  [tex]t=2.028[/tex]

Step-by-step explanation:

Average [tex]A=3400[/tex]

Mean [tex]\=x=3200[/tex]

Sample size [tex]n=36[/tex]

Standard deviation [tex]\sigma=600mg[/tex]

Generally using the Z Test(n>30)

Generally the equation for Standard Error S.E is mathematically given by

[tex]S.E=\frac{600}{\sqrt{36}}[/tex]}

[tex]S.E=100[/tex]

Generally the equation for Z test is mathematically given by

[tex]Z=\frac{\=x-A}{\sigma\sqrt{n}}[/tex]

[tex]Z=\frac{3200-3400}{600\sqrt{36}}[/tex]

[tex]Z=-2[/tex]

From table

[tex]T critical= (Z,df)[/tex]

Where

[tex]df=n-1[/tex]

[tex]df=35[/tex]

Therefore

[tex]t=2.028[/tex]

Answer:

1. 8

2 . 11

[tex]3 . \sqrt{128} \ or \ 8 \sqrt2[/tex]

Step-by-step explanation:

[tex]Distance = \sqrt{(x_2 -x_1)^2 + (y_2 - y_1)^2 }[/tex]

1 . ( 5 , - 2 ) and ( 5 , 6 )

  [tex]Distance = \sqrt{(5 -5)^2 + ( 6-(-2))^2} = \sqrt{ 0 + 8^2 } = \sqrt{64} = 8[/tex]

2 . ( 8 , 6 ) and ( - 3 , 6 )

  [tex]Distance = \sqrt{( -3 -8)^2 + ( 6 - 6)^2 } = \sqrt{ (-11)^2 + 0 } = \sqrt { 121 } = 11[/tex]

3. ( 5 , - 2 ) and ( -3 , 6 )

  [tex]Distance = \sqrt{(-3 - 5)^2 + ( 6 --2)^2} = \sqrt{(-8)^2 + ( 8)^2} = \sqrt{ 64 + 64 } = \sqrt{128}[/tex]

          [tex][ \ \sqrt{128} = \sqrt{ 2 \times 64} = \sqrt{ 2 \times 8^2 } = 8 \sqrt{2} \ ][/tex]

Answer:

inverse variation

Step-by-step explanation:

Thiis is the model for inverse variation.   As x increases, y decreases, and vice versa.

Typical example:;  y = 5/x

Answer:

Step-by-step explanation:

Sinθ = [tex]\frac{\text{Opposite side}}{\text{Hypotenuse}}[/tex]

If, sinθ = -[tex]\frac{1}{2}[/tex] and π < θ < [tex]\frac{3\pi }{2}[/tex]

Since, sinθ is negative, angle θ will be in IIIrd quadrant.

And the measure of angle θ will be (180° + 30°)

θ = 210°

It's necessary to remember that tangent and cotangent of angle θ in quadrant III are positive.

Therefore, cos(210°) = [tex]-\frac{\sqrt{3} }{2}[/tex]

tan(210°) = [tex]\frac{1}{\sqrt{3} }[/tex]

csc(210°) = [tex]-\frac{1}{2}[/tex]

sec(210°) = [tex]-\frac{2}{\sqrt{3} }[/tex]

cot(210°) = √3

Answer:

Step-by-step explanation:

sine 30° = opposite / hypotenuse = 4/8 = 1/2

cosine 30° = adjacent / hypotenuse = 4sqrt(3) / 8 = sqrt(3) / 2

Answer:

Population = All Sandhill cranes bred and hatched in Alaska that migrate south

Sample = The 50 crane samples which are tagged yearly.

Step-by-step explanation:

The population refers to all members or subjects which belongs to a defined study. Each and every subject which meets the requirement of a study makes up the population.

The sample however, is a subset of the population, the sample is a smaller group of subject which is selected from the population randomly to for a representative sample of the population. Here, it is the 50 sampled sandhill cranes bed per year.

Answer:

These are the answers

Step-by-step explanation:

9514 1404 393

Answer:

  $400

Step-by-step explanation:

The word "per" in math often means "divided by". To find price per square foot, find price divided by square feet.

  $700,000/(1750 ft²) = $400 /ft²

The price per square foot of House 4 was $400.

Answer:

Kayla drove 45miles

Answer: She went 3/4 miles in a minute and 45 miles in an hour

Step-by-step explanation:

15 miles in 20 minutes so 45 miles in 1 hour or 60 minutes

Since 45 miles in 60 minutes, 3/4 miles in a minute

Answer:

Step-by-step explanation:

n + d = 12

0.05n + 0.1d = 1    ║ × ( - 10 )

n + d = 12 ..... (1)

- 0.5n - d = - 10 ..... (2)

(1) + (2)

0.5n = 2 ⇒ n = 4

d = 12 - 4 = 8

There are 4 nickels and 8 dimes in the pocket.

Answer:

Hope this helps you.

Answer:

11, 12, 13, 21, 22 and 23

Step-by-step explanation:

Given

[tex]Procedures = 2[/tex]

[tex]1 \to[/tex] Step 1

[tex]2 \to[/tex] Step 2

[tex]3 \to[/tex] Step 3

Required

List all possible experimental outcomes

From the question, we understand that:

[tex]Procedure\ 1 = 3\ steps[/tex]

[tex]Procedure\ 2 = 2\ steps[/tex]

So, the total possible steps (n) are:

[tex]n=Procedure\ 1 * Procedure\ 2[/tex]

[tex]n = 3 * 2[/tex]

[tex]n = 6\ steps[/tex]

Such that the 2nd steps cannot take the value of 3.

So, the outcomes are: 11, 12, 13, 21, 22 and 23

Answer:

x = 22 degree

Step-by-step explanation:

40 + 5x + 30 = 180 degree (being linear pair)

5x + 70 = 180

5x = 180 - 70

x = 110/5

x = 22 degree

Answer:

b.  [tex]\frac{7+\sqrt{61} }{6} ,\frac{7-\sqrt{61} }{6}[/tex]

Step-by-step explanation:

[tex]3x^{2} -1=7x[/tex]

Quadratic equations are suppose to be written as: [tex]ax^2+bx+c=0[/tex]

so the new quadratic equation for this problem will be: [tex]3x^{2} -1-7x=0[/tex]

Now rearrange the terms: [tex]3x^{2} -7x-1=0[/tex]

Then use the Quadratic Formula to Solve for the Quadratic Equation

Quadratic Formula = [tex]x=\frac{-b±}{} \frac{\sqrt{b^2-4ac} }{2a}[/tex]

Note: Ignore the A in the quadratic formula

Once in standard form, identify a, b and c from the original equation and plug them into the quadratic formula.

[tex]3x^{2} -7x-1=0[/tex]

a = 3

b = -7

c = -1

[tex]x=-(-7)±\frac{\sqrt{(-7)^2-4(3)(-1)} }{2(3)}[/tex]

Evaluate The Exponent

[tex]x=\frac{7±\sqrt{(49)-4(3)(-1)} }{2(3)}[/tex]

Multiply The Numbers

[tex]x=\frac{7±\sqrt{49+12} }{2(3)}[/tex]

Add The Numbers

[tex]x=\frac{7±\sqrt{61} }{2(3)}[/tex]

Multiply The Numbers

[tex]x=\frac{7±\sqrt{61} }{6}[/tex]

Answer:11 degrees at sunrisde the temp was -1 degree

Step-by-step explanation:

Answer:

Thus, The steps applied to ABCD to obtain A'B'C'D' is shifted x coordinate 2 units to right and y coordinate 3 units down

Answer:

a) 9000 ft-lb

b) 9000 ft-lb

Step-by-step explanation:

Equation for the work:

The equation for the work done is given by:

[tex]W = Fd[/tex]

In which F is the force needed and d is the distance. The time does not interfere on the work.

A 300-lb gorilla climbs a tree to a height of 30 ft

This means that [tex]F = 300, h = 30[/tex]

Thus

[tex]W = Fd = 300(30) = 9000[/tex]

The work done in both cases is of 9000 ft-lb, as the work is not a function of time.

Answer:

[tex] \blue{y = \dfrac{C + 2k}{2}} [/tex]

Step-by-step explanation:

[tex] C = 2(y - k) [/tex]

[tex] C = 2y - 2k [/tex]

[tex] C + 2k = 2y [/tex]

[tex] \dfrac{C + 2k}{2} = y [/tex]

[tex] y = \dfrac{C + 2k}{2} [/tex]

Answer:

Mean = 21.413

Median = 16.5

Standard deviation = 19.182

0.768

Step-by-step explanation:

Given the data :

Ordered data, X : 4.3 6.1 7.4 10.7 13.1 13.6 14.7 16.5 17.1 17.4 18.7 22.3 36.7 43.2 79.4

The sample size, n = 15

The mean, m= ΣX / n = 321.2 / 15 = 21.413

The median, Md:

1/2(n + 1)th term

1/2 (15 +1) th term

1/2(16) = 8th term

Median = $16.5

The standard deviation, s = √[Σ(x - m)²/ n]

The standard deviation obtained using a calculator is ; 19.182

Coefficient of skewness : = 3(m - Md) / s

= 3(21.413 - 16.5) / 19.182

= 14.739 / 19.182

= 0.768

Step-by-step explanation:

7x-21 = 5x +15

7x-5x = 15 + 21

2x = 36

x = 36/2

x = 18

Answer:

x=18

Step-by-step explanation:

Distribute 7 through the parentheses

7x-21=5(x+3)

Move the variable to the left -hand side and change its sign

7x-21-5x=15

Collect like terms

2x=15+21

divide both sides of the equation by 2

x=18

Answer:

Using absolute change, Clyde took 6.5 less months to take his first steps than Jacob.

Using relative change, it took Clyde 38.24% less time than Jacob to take his first steps.

Step-by-step explanation:

Absolute change:

A number, that is, the difference between two measures.

Jacob: 17 months

Clyde: 10.5 months.

17 - 10.5 = 6.5

Using absolute change, Clyde took 6.5 less months to take his first steps than Jacob.

Relative change:

Absolute change multiplied by 100% and divided by the reference value. So

6.5*100%/17 = 38.24%

Using relative change, it took Clyde 38.24% less time than Jacob to take his first steps.

Answer:

a) 0.7847 = 78.47% probability that no samples are mutated.

b) 0.9769 = 97.69% probability that at most one sample is mutated.

c) 0% probability that more than half the samples are mutated.

Step-by-step explanation:

For each sample, there are only two possible outcomes. Either they are mutated, or they are not. The probability of a sample being mutated is independent of any other sample, which means that the binomial probability distribution is used to solve this question.

Binomial probability distribution

The binomial probability is the probability of exactly x successes on n repeated trials, and X can only have two outcomes.

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

In which [tex]C_{n,x}[/tex] is the number of different combinations of x objects from a set of n elements, given by the following formula.

[tex]C_{n,x} = \frac{n!}{x!(n-x)!}[/tex]

And p is the probability of X happening.

2% of cases.

This means that [tex]p = 0.02[/tex]

12 samples are studied

This means that [tex]n = 12[/tex].

(a) No samples are mutated.

This is [tex]P(X = 0)[/tex]. So

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 0) = C_{12,0}.(0.02)^{0}.(0.98)^{12} = 0.7847[/tex]

0.7847 = 78.47% probability that no samples are mutated.

(b) At most one sample is mutated.

This is:

[tex]P(X \geq 1) = P(X = 0) + P(X = 1)[/tex]

Then

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 0) = C_{12,0}.(0.02)^{0}.(0.98)^{12} = 0.7847[/tex]

[tex]P(X = 1) = C_{12,1}.(0.02)^{1}.(0.98)^{11} = 0.1922[/tex]

[tex]P(X \geq 1) = P(X = 0) + P(X = 1) = 0.7847 + 0.1922 = 0.9769[/tex]

0.9769 = 97.69% probability that at most one sample is mutated.

(c) More than half the samples are mutated.

This is:

[tex]P(X > 6) = P(X = 7) + P(X = 8) + P(X = 9) + P(X = 10) + P(X = 11) + P(X = 12)[/tex]

So

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 0) = C_{12,7}.(0.02)^{7}.(0.98)^{5} \approx 0[/tex]

So the others(greater than 7) wil be 0 too

0% probability that more than half the samples are mutated.

Answer:

Step-by-step explanation:

Given that the adult dosage = 15 mg/day.

1. The pediatric dosage for a child weighing 52 pounds can be determined by;

Pediatric Dosage = (Child weight divided by 150 lbs.) x Adult Dose

                             = [tex]\frac{52}{150}[/tex] x 15 mg/day

                             = 5.2 mg/day

The pediatric dosage of the medication for a child weighing 52 pounds is 5.2 mg per day.

2. The medication can be consume by either an adult or a  pediatric at a measured quantity. If an adult takes 15 mg of the medication per day, then any child whose weight is 52 pounds can take a maximum quantity of 5.2 mg of the medication per day. This implies that a child of the measured weight should not take more than 5.2 mg of the medication per day, and probably not at once.

The dosage of the medication for a pediatric can be determined by;

Pediatric Dosage = (Child weight divided by 150 lbs.) x Adult Dose

That is, once the weight of a child is determined, the dosage can be calculated.