The magnetic field is uniform between the pole faces and negligible elsewhere, the change in magnetic flux (dΦ) will be due to the change in the area (dA) or the change in the magnetic field (dB) with time (dt).
To determine the induced emf in the loop, you'll need to consider the following terms: magnetic field (B), area (A), number of turns (N), and the rate of change of the magnetic flux (dΦ/dt).
According to Faraday's Law of Electromagnetic Induction, the induced emf (ε) in the loop is given by the equation:
ε =sin (dΦ/dt)
Where Φ represents the magnetic flux, which can be calculated using the formula:
Φ = B × A
Assuming you have the necessary information about the change in magnetic flux with time, you can plug those values into the equation to find the induced emf in the loop.
You can learn more about magnetic fields at: brainly.com/question/14848188
#SPJ11
Compare and contrast angular momentum and linear momentum. Include two ways that they are alike and two ways that they are different. Be sure to discuss how mass affects both angular and linear momentum.
Angular momentum and linear momentum are two physical concepts that have some similarities and differences. They are both measures of motion, but they describe different types of motion.
Similarities:
Both angular and linear momentum are conserved in isolated systems, meaning that the total amount of momentum in a system remains constant unless acted upon by an external force.Both angular and linear momentum are vector quantities, meaning they have both magnitude and direction.Differences:
Angular momentum is a measure of an object's rotational motion, while linear momentum is a measure of an object's translational motion.Angular momentum depends on the object's mass and its distance from the axis of rotation, while linear momentum depends only on the object's mass and velocity.What is angular momentum and linear momentum?The term angular momentum and linear momentum are similar in that they are both conserved and vector quantities, but they differ in that angular momentum describes rotational motion and linear momentum describes translational motion.
In summary, angular momentum depends on both mass and distance from the axis of rotation, while linear momentum depends only on mass and velocity.
Learn more about angular momentum from
https://brainly.com/question/4126751
#SPJ1
What is the relationship between current and resistance across a circuit?
O joint variation
O inversely proportional
O no relationship
O directly proportional
Answer: The relationship between current, voltage and resistance is expressed by Ohm's Law. This states that the current flowing in a circuit is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit, provided the temperature remains constant.
Explanation:
During which time period do you have to use your head lights?
Answer:at night.
Explanation:
Two billiard balls of equal mass undergo a perfectly elastic head-on collision. If one ball's initial speed was 2. 00 m/s, and the other's was 3. 60 m/s in the opposite direction, what will be their speeds and directions after the collision?.
After the collision, the final velocity of both balls will be (2.00 + 3.60) m/s in the same direction.
What is collision?The outcome of the two things applying force to one another. The kinetic energy of the two objects is transformed into the other forms, such heat or sound, when they contact. Both elastic and inelastic collisions exist. Both the colliding objects maintain their original energy in an elastic collision.
The first ball has kinetic energy of (1/2)mv² where m is the mass of the ball and v is the velocity. The second ball has kinetic energy of (1/2)m(3.60)²
After collision, the final velocity of both balls in the same direction can be calculated using the conservation of momentum.
m1v1 + m2v2 = m1v'1 + m2v'2
where m1,m2 are the mass of the balls, v1 and v2 are the initial velocities of the two balls and v'1 and v'2 are the final velocities of the two balls.
Given that the mass of the two balls is equal, you can simplify this equation as:
v1 + (-v2) = v'1 + v'2
and solving for v'1 and v'2 gives v'1 = (v1+v2) and v'2 = (v1+v2)
Therefore, after the collision, the final velocity of both balls will be (2.00 + 3.60) m/s in the same direction.
To know more about Collision visit:
https://brainly.com/question/4322828
#SPJ4
Two cars A and B are initially at the same position. Car A starts moving at constant speed of 4m/s. If car B starts moving at constant speed of 8m/s, 2 seconds later after car A moved, where does car B overtakes car A? A. 12m B. 30m C. 16m D. 24m
Answer:
16 m
Explanation:
(4 m/s)(t + 2 s) = (8 m/s)t
4t + 8 = 8t
8 = 4t
t = 8/4 = 2 sec
This means that after Car A has traveled for 4 sec, Car B catches up to it after it has traveled 2 s (having left 2 s after Car A).
Where do they meet up:
d = rt
Car B: d = (8 m/s)(2 s) = 16 m
Car A: d = (4 m/s)( 2 s + 2 s) = 16 m **always check both equations to make sure your answer is correct
20 of 35
Which of the following is true?
A
All EM waves are transverse in shape, but mechanical waves can be
either transverse or longitudinal.
All mechanical waves are transverse in shape, but EM waves can be
either transverse or longitudinal.
b
SUBMIT ANSWER
B
D
All EM waves are longitudinal in shape, but mechanical waves can be
either transverse or longitudinal.
All mechanical waves are longitudinal in shape, but EM waves can be
either transverse or longitudinal.
Which of the following is a metric unit of measure that measures length and distance?a.) Footb.) Areac.) Meterd.) Yard
Meter is a metric unit of measure that measures length and distance because area is not any of the measurement unit.
We always measure the physical properties of a thing using particular units. For example, the unit for measuring your bodyʼs mass is the pound and the unit for measuring your height is inches. But, of course, itʼs not as simple as that. If you use the metric system you measure your mass in kilograms, not pounds, and you measure your height in centimeters.
And even if you measure your height in inches, you are probably mix two different units: feet and inches. Although we can measure the mass and lengths of the devices and we deal with in computer architecture, we are typically more interested in a third property.
Time (measurement unit: the second) and the related properties of period and its reciprocal, frequency. Furthermore, computers manipulate physical representations of information, which has its own measurement unit.
To know more about measurement unit here
https://brainly.com/question/27849585
#SPJ4
Lars is balancing equations with his study group. He is unsure about one equation because each member of the study group came up with a different answer. Which is the proper way to balance the equation Ca(OH)2 + H3PO4 → Ca3(PO4)2 + H2O?
Follow my lead or ur answer is very wrong
Jamie finds the height of a classroom by dropping a penny from the ceiling. It takes 0.8 seconds to hit the ground. How tall are the ceilings?
Answer:
The height of the classroom can be determined using the equation:
height = (1/2) * g * t^2
Where:
g = the acceleration due to gravity (approximately 9.8 m/s^2 on Earth)
t = the time it takes for the penny to fall (0.8 seconds)
Plugging in the known values, we get:
height = (1/2) * 9.8 m/s^2 * (0.8 s)^2
height = 3.072 m
So the ceilings are approximately 3.072 meters tall.
Explanation:
A wire ring of internal radius
3cm and external radius 3.2 cm is
rested on the surface of a liquid and
then raised. An extra pulling force
equivalent to the weight of 3.03g is
required before the film breaks than it
is after. Calculate the surface tension
of the liquid.
The surface tension of the liquid is 24.1 g/m.
How do you determine the surface tension of the liquid?To determine the surface tension of the liquid, employ the formula:
surface tension = (extra force required) / (length of the film)
extra force required = 3.03 g
internal radius = 3 cm = 0.03 m
external radius = 3.2 cm = 0.032 m
The length of the film can be calculated as the circumference of the external ring minus the circumference of the internal ring:
length of the film = (2 * pi * external radius) - (2 * pi * internal radius)
= (2 * pi * 0.032 m) - (2 * pi * 0.03 m)
= 0.1257 m
Hence, the surface tension can be determined following our chosing formula:
surface tension = (3.03 g) / (0.1257 m)
= 24.1 g/m
It can then be concluded that the surface tension of the liquid is 24.1 g/m.
learn more about surface tension: https://brainly.com/question/138724
#SPJ1
Convert 1.5 days to s
Convert 5.2 ft to m
Convert 3600 s to hr
Convert 10.2 m to ft
Convert 305 g to kg
Convert 180 pm to m
Convert 73 kg to g
Convert 1,366 s to min
Convert 86,000 m to km
Please answer these and SHOW ALL WORK, please please please show ALL WORK. Need this done right now please help! Thank you so much!
One minute has 60 seconds, One hour has 60 minutes and one day has 24 hours. Thus, 80 x 60 x 24 = 86,400 seconds in a day.
What is the formula for days to seconds?The information about how many seconds there are in a minute, how many minutes there are in an hour, and how many hours there are in a day can be used to quickly and efficiently answer this question. The next step is to convert 90 minutes into hours and minutes because there are only 60 minutes in an hour: 90 60 = 1.5 hours. A minute has 60 seconds, thus an hour (60 mins) has 3,600 seconds (60 x 60), and if you multiply that number by three hours, you get 10,800 seconds. Assuming that each month has 30 days, a whole year has 360 days. A different European approach (30E+/360) Date A will be modified if it coincides with the 31st of a given month.To learn more about days to seconds refer to:
https://brainly.com/question/11947673
#SPJ1
about how often is a full moon observed from earth’s surface?
Minimum 14 times in a year is the time in which a full moon is observed from earth’s surface.
The Moon is not like Earth. It does not have oceans, lakes, rivers, or streams. It does not have wind-blown ice fields at its poles. Roses and morning glories do not sprout from its charcoal gray, dusty surface. Redwoods do not tower above its cratered ground.
Dinosaur foot prints cannot be found. Paramecium never conjugated, amoeba never split, and dogs never barked. The wind never blew. People never lived there—but they have wondered about it for centuries, and a few lucky ones have even visited it.
The lunar surface is charcoal gray and sandy, with a sizable supply of fine sediment. Meteorite impacts over billions of years have ground up the formerly fresh surfaces into powder. Because the Moon has virtually no atmosphere.
To know more about earth's surface here
https://brainly.com/question/17853655
#SPJ4
A substance did not change its chemical nature in a reaction. Which most likely describes the reaction?
Answer:
The substance would of been frozen
Explanation:
A substance did not change its chemical nature in a reaction. Which most likely describes the reaction? It was frozen.
A baseball diamond is a square with sides of 90 feet. What is the shortest distance.
The shortest distant will be the diagonal of the square. The value of the diagonal of the square is 127.3 feet.
How to find the diagonal value?Square is a figure with a four sides that has the same value for each. The formula for its diagonal is sides√2. As per given sides is 90 feet. The calculation will be:
Diagonal = sides√2
Diagonal = 90√2
Diagonal = 90 x 1.41421356237
Diagonal = 127.279220613
Let round the value. So, the diagonal = 127.3 feet. You can also determine diagonal value from phytagoras theory by dividing the square into 4 triangle then calculate the diagonal.
Learn more about square here
https://brainly.com/question/25092270
#SPJ4
What two types of energy does a moving bike riding down a hill have?
When riding down a hill, the two types of energy which a moving bike has are kinetic energy and thermal energy.
What is kinetic energy?Kinetic energy is the energy of motion, observable as the movement of an object or subatomic particle. Every moving object and particle have kinetic energy. Example of kinetic energy, such as: a race car speeding around the corner, a bicycle crushing down the hill, and students running home from the school.
What is thermal energy?Thermal energy refers to the energy contained within a system which is responsible for its temperature. Heat is the flow of thermal energy. An example of thermal energy is boiling water on the stove.
So, when riding down a hill, a bike has kinetic energy, and when brakes apply, the energy into thermal energy on the brake (heat).
Learn more about kinetic energy at: https://brainly.com/question/26472013
#SPJ4
An astronaut at rest in space with mass 84 kg fires a thruster that expels 35 g of hot gas at 875 m/s. What is the velocity of the astronaut after firing the thruster?.
Answer:
about 0.365 m/s
Explanation:
You want to know the velocity of an astronaut who starts from rest and fires a thruster that expels 35 g of gas at 875 m/s.
MomentumThe total momentum of the system is the same before and after the thruster is fired: 0.
If v is the velocity of the astronaut, it must satisfy the equation ...
(84)v +(0.035)(875) = 0
v = -(0.035)(875)/(84) ≈ -0.3646
The velocity of the astronaut is about 0.365 m/s in the direction opposite of the expelled gas.
__
Additional comment
We have used (kg·m/s) as the units of momentum. 35 g = 0.035 kg. We have also assumed that the mass of the system before firing is a total of 84.035 kg
Answer the following automotive services question. Main drive gear = 35 teeth speed of main drive gear = 450 r. P. M. Countershaft drive gear = 70 teeth speed of countershaft drive gear = r. P. M.
The speed of countershaft drive gear is 225 RPM. To find it, you have to compare both STM value.
How to calculate the speed of that countershaft drive gear?To calculate the the speed of countershaft drive, we use the formula of the surface teeth per minute (STM) where the formula is:
the surface teeth per minute (STM) = Speed x number of teeth
Because of the main drive gear is connected with the countershaft drive gear, the STM of both are equivalent. So.
Main gear speed x Main gear number of teeth = countershaft speed x countershaft number of speed
35 teeth x 450 RPM = 70 teeth x "x" RPM
450 RPm = 2 x "x" RPM
x = 450 : 2 RPM
x = 225 RPM
Learn more about the surface teeth per minute of a gear here
https://brainly.com/question/3944772
#SPJ4
convert the following measurement
0.0088(g/cm^3)=_____ kg/m^3
Answer:
0.00088 kg/m³
Explanation:
Given:
[tex] \displaystyle{ \dfrac{8.8 \times {10}^{ - 3} \: \text{g} }{ \text{cm}^{3} }}[/tex]
Let's consider cm³ to m³ first. We know that m³ is 100 cm³. Therefore, cm³ would equal to m³ × 10 negative squared:
[tex] \displaystyle{ \dfrac{8.8 \times {10}^{ - 3} \: \text{g} }{ {10}^{ - 2} \: \text{m}^{3} }}[/tex]
And from the numerator, 1 kg = 10³ grams. Therefore, 1 gram would equal 10 to negative cube kg Hence:
[tex] \displaystyle{ \dfrac{8.8 \times {10}^{ - 3} \times {10}^{ - 3} \: \text{kg} }{ {10}^{ - 2} \: \text{m}^{3} }}[/tex]
Then evaluate using law of exponent where if same bases multiply each other, we add the exponents:
[tex] \displaystyle{ \dfrac{8.8 \times {10}^{ - 3 - 3} \: \text{kg} }{ {10}^{ - 2} \: \text{m}^{3} }} \\ \\ \displaystyle{ \dfrac{8.8 \times {10}^{ - 6} \: \text{kg} }{ {10}^{ - 2} \: \text{m}^{3} }} \\ \\ \displaystyle{ \dfrac{8.8 \times {10}^{ - 6 + 2} \: \text{kg} }{ \: \text{m}^{3} }} \\ \\ \displaystyle{ \dfrac{8.8 \times {10}^{ - 4} \: \text{kg} }{ \: \text{m}^{3} }}[/tex]
And 8.8 × 10^-4 is equal to 0.00088. Therefore, the answer is 0.00088 kg/m³
A pile of gunpowder can represent chemical ____ energy , while a flying pulley can represent mechanical ____ energy
A pile of gunpowder can represent chemical potential energy , while a flying pulley can represent mechanical kinetic energy.
Thermal energy is kinetic energy associated with the random motion of atoms and molecules. Temperature is a quantitative measure of “hot” or “cold.” When the atoms and molecules in an object are moving or vibrating quickly, they have a higher average kinetic energy (KE), and we say that the object is “hot.”
The specific heat capacity (c) of a substance, commonly called its “specific heat,” is the quantity of heat required to raise the temperature of 1 gram of a substance by 1 degree Celsius (or 1 kelvin)..
Like matter, energy comes in different types. One scheme classifies energy into two types: potential energy, the energy an object has because of its relative position, composition, or condition, and kinetic energy, the energy that an object possesses because of its motion.
To know more about chemical energy here
https://brainly.com/question/68601
#SPJ4
What is the net torque on the pulley about the axle?
τnet = (TL ‐ TR)R is the needed net torque just on pulley about the axle.
How do pulleys work?A flexible line, cord, rope, chain, or belt is fastened to the rim of a wheel termed as a pulley. To transport motion and energy, pulleys may be employed singly or in combination.
If TL and TR are really the stresses pulling there at left and the sides of the pulleys, respectively, the net torque here on pulley would then be defined as net = (TL - TR)R, in which R represents the radius of pulley (see Fig. 1). It is believed that positive torque moves in a clockwise direction.
This means that τnet = (TL ‐ TR)R is the necessary formula for net torque.
To know more about torque visit:
https://brainly.com/question/29024338
#SPJ4
8 An astronaut orbits the Earth in a space station. Which is a vector quantity? A B C D the weight of the astronaut the mass of the astronaut the speed of the satellite the temperature inside the satellite
The space station's mass and the pull of its gravitational field on the planet(D)
Who is called astronaut?Astronaut is a term for a person who has travelled to space that is derived from the Greek words for "star" and "sailor." More specifically, space travellers from the United States, Canada, Europe, and Japan are referred to as "astronauts" in the West. An astronaut is a person who has received specialised training in order to travel to space. A spaceship's astronauts may do a variety of tasks. Typically, a commander and a pilot collaborate to lead the mission. Other positions could be science pilot, mission expert, payload commander, and flight engineer.
How important is it to be an astronaut?The astronaut does highly significant scientific research on Earth to advance technological advancement in addition to gathering samples, performing tests, and making minor repairs on spaceships and space stations. The study of space and even all the efforts made to escape the gravity of Earth have led to the production of items that we use every day as well as scientific theories that have altered our perceptions of space and our understanding of the origins of life on Earth.
To know more about Astronaut visit:
https://brainly.com/question/13451310
#SPJ1
Which explains how lightning is formed?
A two objects with the same electric charge rub together
B electrons flow through a conductor
C raindrops conduct electricity from clouds to the ground
D two objects with different electric charges rub together
The lightning is formed by two objects with different electric charges rub together Hence, option (D) is correct.
What is lightning?Charges created by rubbing can be used to explain lightning. The water droplets flow downhill during a thunderstorm while the air currents rise higher.
As a result of this process, the positive charges gather close to the cloud's upper edge, while the negative charges gather close to the cloud's lower edge and also close to the ground.
The charge's magnitude increases significantly as it builds up. Airborne water droplets serve as a conductor for this charge.
Lightning and thunder are produced when these charges flow to meet.
Learn more about Lightning here:
https://brainly.com/question/10443677
#SPJ1
Answer: C raindrops conduct electricity from clouds to the ground
Explanation:
a cinder block is sitting on a platform 20 m high. It weighs 7.9kg the block has energy calculate it
The energy that an item retains due to its position in relation to other objects, internal tensions, electric charge, or other reasons is known as potential energy in physics.
What is a potential energy?Although it has connections to the Greek philosopher Aristotle's concept of potentiality, the phrase "potential energy" was coined by the Scottish engineer and physicist William Rankine in the 19th century. Potential energy is connected to forces that affect a body in such a way that their combined work is only dependent on the body's beginning and ultimate positions in space. At any point in space, these forces, also known as conservative forces, can be represented by vectors that are gradients of a particular scalar function known as potential.
The block has potential energy due to its position above the ground. The formula for potential energy is PE = mgh, where m is the mass of the object (7.9 kg), g is the acceleration due to gravity (approximately 9.8 m/s^2), and h is the height above the ground (20 m).
So the potential energy of the cinder block is:
PE = (7.9 kg) x (9.8 m/s^2) x (20 m) = 1564 Joules
To know more about potential energy visit:
https://brainly.com/question/24284560
#SPJ1
The color of light emitted is determined by the amount of energy released by the atom when electrons within it relax.
Answer:
As electrons move from higher energy levels to lower energy levels a photon (particle of light) will be given off. This is the process of emission.
Explanation:
electrons and photons also do this
How do you calculate the force of an electron?
The force of an electron cannot be calculated directly. However, the force of an electron can be determined indirectly by measuring the electric field around the electron and calculating the force on the electron using the equation F=qE, where q is the charge of the electron and E is the electric field.
The electric field around an electron can be measured using various experimental methods. One of the most common methods is to use a laser to measure the electric field of an electron. This is done by shining a laser beam onto a charged particle and then measuring the intensity of light that is scattered from the particle.
The electric field of the electron can then be calculated from the measured intensity of the scattered light.
Learn more about force of an electron:
https://brainly.com/question/16012425
#SPJ4
Is cycling up a hill kinetic energy?
Yes, cycling up a hill is kinetic energy.
Kinetic energy refers to the energy of motion, which is observable as the movement of an object. Every move has kinetic energy. For instance, cycling up a hill can convert up to 90% of an individual's energy and movement into kinetic energy. The kinetic energy produced is then used to move the cycle up to the hill. Momentum, along with the balance of the rider, helps keep the cycle stable while traveling along the path up to the hill.
Therefore, it is concluded that cycling up a hill is kinetic energy.
You can learn more about kinetic energy at
https://brainly.com/question/8101588
#SPJ4
Based on your data, is the relationship between friction and speed direct (both go up), or indirect (one decreases and the other increases)? Explain how your data support this answer.
Need help asap !!!!!!!!!!!!?!!!!?
Answer: A, B, and C
Explanation: A standard room-vacuuming robot doesn't unpack itself from the box it comes in.
In aerobic respiration, glucose and oxygen are used up and carbon dioxide, water and __________ are released.
Which of the following is not true about a longitudinal wave?
A (They are all considered mechanical waves.
B (They need a medium (material) in order to travel.
C (They move up and down (perpendicular) to the direction of the wave's energy.
D (They move along with (parallel to) the direction of the wave's energy.
Answer:
Which of the following is NOT TRUE about a longitudinal wave?
A. They are all considered mechanical waves.B. They need a medium (material) in order to travel.C. They move up and down (perpendicular) to the direction of the wave's energy.D. They move along with (parallel to) the direction of the wave's energy.Explanation:
What are waves?A wave is a disturbance in a medium that carries energy without permanently moving a substance. Particles of the medium are momentarily displaced and then return to their original location in a wave.Mechanical waves are waves that require a medium to transport energy from one location to another. Mediums are materials that move energy or light from one substance or location to another. Answer breakdownsChoice C is the best answer. In a transverse wave, particles of the medium are displaced in a direction that is perpendicular to the direction of energy transport.Choice D is incorrect. This choice describes exactly what a longitudinal wave is. In a longitudinal wave, particles of the medium are displaced in a direction that is parallel to the direction of the wave's energy. Choice A is incorrect. A mechanical wave is any wave that requires a medium to transport energy from one location to another. Choice B is incorrect. As per choice A's explanation, if the longitudinal waves are mechanical they must then require a medium.