Based on the structural formulas, which of the following identifies the compound that is more soluble in water and best helps to explain why ?
O Ethane, because the electron clouds of its molecules are more polarizable than those of propanol.
O Ethane, because its molecules can fit into the spaces between water molecules more easily than those of propanol can.
O Propanol, because its molecules have a greater mass than the molecules of ethane have.
O Propanol, because its molecules can form hydrogen bonds with water molecules.

The density of gas can change, in contrast to the density of solids or liquids. This is due to the fact that gas is not compact and that temperature and pressure have an impact on its molecules.

The formula is d = MP/RT, where d is the gas's density in kilograms per liter, M is its molar mass in grams per mole, P is its pressure in atmospheric pressure units, and R is the gas law constant. The equation demonstrates that the molar mass increases as gas density increases. The pressure and temperature parameters for the gas determine the gas's density. Gas can dramatically alter its volume with a change in pressure due to its strong compressibility. Therefore, changes in density (at low pressure) can be substantial.

Learn more about molar here-

https://brainly.com/question/12127540

#SPJ4

For the homogeneous solution consisting of KCl and H₂O,  the type of forces that are involved is the dipole-dipole forces, the ion-dipole forces dispersion forces, the hydrogen bonding.

In the homogeneous solution if the two compounds are KCl and H₂O, they both polar and the forces involved are dipole - dipole forces and the dispersion forces. the forces present in between the water molecules is the hydrogen bonding. the forces in between the K⁺ and the Cl⁻ present is the ion - dipole forces,

Thus the all the four forces present in the homogeneous solution of the KCl and H₂O that is the dipole-dipole forces, the ion-dipole forces, the dispersion forces, and the hydrogen bonding.

To learn more about forces here

https://brainly.com/question/7033619

#SPJ4

The 1.5 ml of a 10% solution that was made into a 3.0 ml solution by adding normal saline now has a new concentration of 5%.

The amount of material in a certain area is referred to as concentration in chemistry. Another definition states that concentration is the ratio of a solution's solute to its entire solution or solvent. Mass per unit volume is a common way to express concentration. However, moles or units of volume can also be used to express the solute concentration. Concentration could be per unit mass instead of volume. Concentration can be computed for any mixture, despite often being used with chemical solutions.

By mathematically dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution, one may calculate the concentration (or, less commonly, the solvent).

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 25.98g/mol is the molar mass of the unknown acid that was dissolved.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

mole =given mass ÷ molar mass

Molar mass of  unknown acid= ?

mass of  unknown acid= 0.178 grams

moles of  unknown acid= 0.00685 moles

Substituting the values in above formula we get

0.00685  = 0.178  ÷ molar mass

molar mass=25.98g/mol

Therefore, 25.98g/mol is the molar mass of the unknown acid that was dissolved.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

Answer:

Explanation:

The equilibrium constant (Kc) is a measure of the relative concentrations of the reactants and products at equilibrium for a given chemical reaction. It is defined as the ratio of the product concentrations raised to their stoichiometric coefficients, to the reactant concentrations raised to their stoichiometric coefficients. For a general reversible reaction

aA + bB <=> cC + dD

The equilibrium constant is defined as:

Kc = [C]^c [D]^d / [A]^a [B]^b

where [X] represents the concentration of species X (in molarity units), and the superscripts on the concentrations represent the stoichiometric coefficients of the species in the balanced equation for the reaction.

The reaction quotient (Qc) is similar to the equilibrium constant, but it is calculated using the concentrations of the reactants and products at a given point in time, rather than at equilibrium. The reaction quotient is also defined as the ratio of the product concentrations raised to their stoichiometric coefficients, to the reactant concentrations raised to their stoichiometric coefficients, and is calculated using the same equation as Kc, but with the concentrations at a specific point in time, rather than at equilibrium.

Qc = [C]^c [D]^d / [A]^a [B]^b

It can be used to predict the direction of reaction depending on the sign of Qc, Kc.

If Qc < Kc, the reaction will shift in the direction of products.

If Qc > Kc, the reaction will shift in the direction of reactants

If Qc = Kc, the reaction is at equilibrium.

If you want to know more about equilibrium reaction you can check on Le Chatelier's principle.

Answer:

Term

Liquid    C) takes the shape and volume of an entire container

Plasma    A) charged particles that do not have a definite shape or volume

Solid    B) has a fixed volume and shape

Gas    D) assumes the shape of the part of the container from the bottom up

Hydroelectric power is one of the oldest and most widely used renewable sources of energy.

Globally we see that hydropower is by far the largest modern renewable source. Every country's top priority is to generate hydroelectric power so they have to rely less on nuclear and coal power plants.

Hydroelectric power is generated by using the elevation difference,  created by a dam or diversion-like structure of water flowing in on one side and out, far below, on the other side.

If we talk about some countries, Hydropower currently generates 31.5% of total U.S. renewable electricity generation.

If you need to learn more about hydroelectric power, click here

https://brainly.com/question/15228003?referrer=searchResults

#SPJ4

Answer:

180 N + 180 N = 360N

Explanation:

since they are all force of different side, you will add them.

Most chlorine atoms contain 18 neutrons as mole ratio of chlorine-35 and chlorine-37 is more than 1.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

let the moles of chlorine-35 is n1 and chlorine-37 is n2

now we will use the formula of average atomic mass

M=n₁M₁+n₂M₂/n₁+n₂

let say, n₁/n₂=x

substitution gives,35.45=x(35)+37/x+1 which on solving gives x=3.44

since mole ratio is more than 1, that's why most chlorine atoms have 18 neutrons.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

Carbon 1: δ = 2.09 ppm (The C1 atom is a methyl group, and is in a tertiary environment, which typically corresponds to a chemical shift of around 2.09 ppm).

Chemical shift is a term used in NMR spectroscopy to describe the relative difference in the resonance frequency of a nucleus in a molecule compared to a reference frequency.

2. Carbon 2: δ = 11.81 ppm (This is the carbonyl carbon, and is in a sp2 hybridized environment, which typically corresponds to a chemical shift of around 11.81 ppm).
3. Carbon 3: δ = 13.92 ppm (This is the terminal carbon of the pentene chain, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 13.92 ppm).
4. Carbon 4: δ = 16.53 ppm (The C4 atom is a methylene group, and is in a secondary environment, which typically corresponds to a chemical shift of around 16.53 ppm).
5. Carbon 5: δ = 17.86 ppm (The C5 atom is a quaternary carbon, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 17.86 ppm).

To learn more about chemical shift
https://brainly.com/question/8171972
#SPJ4

Answer:

a. 2H2 + O2--> 2H2O

b. 2ZnS +3O2-->2ZnO +2SO2

Explanation:

a.

note:

(when you put coefficients before the elements or the compounds you should multiply it by each element and the number that's on its right...

so if it's 2H2O

that is 2xH2 which is 4 hydrogen atoms

and 2 x O which is 2 oxygen atoms )

......

on the left side of the equation

there are two atoms of oxygen

but on the right side there's only one atom

so in order to balance them you have to put 2 as a coefficient for H2O

H2+O2 ->2H2O

so now you have 2 hydrogen atoms on the left side and 4 on the right side

you put 2 as a coefficient for H2

and now

there's 4 hydrogen atoms on both sides

and 2 oxygen atoms on both sides

b.

you do the same here

ZnS + O2 -> ZnO + SO2

2 oxygen atoms ---> 3 oxygen atoms

ZnS + 2O2 -> ZnO + SO2

4 oxygen atoms ---> 3 oxygen atoms

ZnS + 2O2 -> 2ZnO + SO2

4 oxygen atoms ---> 4 oxygen atoms

but

1 Zn ---> 2Zn

2ZnS + 2O2 -> 2ZnO + SO2

2S --> 1S

2ZnS + 2O2 -> 2ZnO + 2SO2

2S--> 2S

but

4O---> 6O

2ZnS + 3O2 -> 2ZnO + 2SO2

Answer:Angelica currently works on energy efficiency programs for Nexant, Inc, an Arizona-based company focused on clean energy solutions.

Explanation:

The size of an ion is determined by its atomic radius, which is a measure of the size of the atom from which the ion is formed. The atomic radius of an atom is generally determined by the size of its electron cloud. The size of the electron cloud is influenced by the number of electrons and the energy levels they occupy.

Of the ions given, Li+ has the smallest atomic radius because it has the smallest number of electrons and the highest effective nuclear charge, which means that its electrons are held more closely to the nucleus. Na+, K+, and CS+ have larger atomic radii than Li+ because they have more electrons and lower effective nuclear charges, which means that their electrons are held more weakly by the nucleus.

Therefore, the answer is CS+ has the largest radius.

NO2(OH) dissolved in water is an example of an acidic salt.

Acidic salts are formed when a strong acid and a weak base react together. They are acidic in solution because they dissociate to form H+ ions and an anion. In this case, the acidic salt is NO2(OH), which when dissolved in water, dissociates to form H+ ions and OH- ions, resulting in an acidic solution.

Ni(OH)2 dissolved only in an acidic solution is an example of a basic salt.

Basic salts are formed when a strong base and a weak acid react together. They are basic in solution because they dissociate to form hydroxide ions (OH-). In this case, the basic salt is Ni(OH)2, which when dissolved only in an acidic solution will dissociate to form Ni2+ ions and OH- ions resulting in a basic solution.

Learn more about Acidic and Basic Salts here: https://brainly.com/question/7178280

#SPJ4

Determine the substance's molecular weight in units of one mole, then divide the molar mass value by the molecular mass, and multiply the result by the Avogadro constant to get the required number of molecules.

It is possible to determine the number of molecules by using the relationship between the number of moles and Avogadro's number, which is provided by;

1 mole = Avogadro's constant (NA)

The number of molecules will equal the product of the number of moles and Avogadro's number, which is determined after the number of moles has been determined

To know more about molecules click here

https://brainly.com/question/19922822

#SPJ4

The ions will combine to form a salt are Cl- and Cs+ when Hydrochloric acid (HCl) is combined with cesium hydroxide (CsOH) in a neutralization reaction.

HCl + CsOH --> CsCl + H2O

Cesium chloride is the salt that results from the neutralization of hydrochloric acid with cesium hydroxide. Because both of the bonds in salt compounds the positively charged cesium ion and the negatively charged chloride ion have electrical charges, they are referred to as ionic bonds. A neutralization reaction occurs when an acid and a base combine to form salt and water in an aqueous solution. A salt is the name for the aqueous cesium chloride that is created during the process.

To learn more about cesium chloride click here https://brainly.com/question/29108769

#SPJ4

Wave nature of matter is responsible for interference pattern being exhibited by electrons.

Shortly after de Broglie proposed the wave nature of matter, two scientists at Bell Labs, C.J. showed experimentally that electrons can exhibit wave-like behavior. The wave-like motion of electrons is mathematically described by the so-called Bloch wave function. Named after his 20th-century physicist Felix Bloch, who first described the behavior of electrons in crystalline solids, these wavefunctions are complex. That is, it has both real and imaginary components.

These waves are called matter waves because electrons are a type of matter. Here,we relate the quantitative features of matter waves to familiar and measurable physical quantities such as energy, mass, and momentum.

Learn more about matter waves visit:

brainly.com/question/22073855

#SPJ4

There are 5,944 carbon atoms in 2.12 moles of propane, and 15,528 hydrogen atoms in 2.12 moles of propane.

What is carbon?

Carbon is an element that occurs in nature and is essential for life. It is the fourth most abundant element in the universe and is present in all living organisms. Carbon exists in many different forms, including graphite, diamond, amorphous carbon, and fullerenes. Carbon is a key component of organic molecules, which are the building blocks of life. Carbon also plays an important role in the global carbon cycle.

To learn more about carbon
https://brainly.com/question/26150306
#SPJ4

The process orcas uses the oxygen is from the blowholes. the blow holes are situated on the top of of the head and it uses oxygen from their.

The whales and the humans uses the lungs for the respiration or to get oxygen required for the breathing. the orcas uses the oxygen from the blow holes situated at the top of the head. The orcas lives under the water and when the orcas dive in the water they have ability to hold the breath for at the time . but this is not good for the health . it is be very stressful for the body.

Thus, the process do the orcas uses oxygen for the intake is the from the blow holes.

To learn more about orcas here

https://brainly.com/question/29784862

#SPJ4

The vinegar also caused the egg white to become more acidic, making it easier to separate from the yolk. Additionally, the vinegar helped preserve the egg by preventing bacteria from growing on the eggshell.

Bacteria are microscopic organisms that exist virtually everywhere in nature. They range in size from 0.2 to 0.8 micrometers and can be found in soil, water, air, and even inside other organisms. Bacteria can reproduce rapidly, and some species can form biofilms that make them resistant to antibiotics. Bacteria can have beneficial roles in food production, soil fertility, and human and animal health. They can also cause diseases, such as cholera, meningitis, and tuberculosis. Bacteria are able to adapt quickly to changing environments and can become resistant to antibiotics.

To learn more about bacteria
https://brainly.com/question/28683092
#SPJ4

When gas is removed from a container with a fixed volume, the number of gas particles decreases, so there are fewer collisions and thus less pressure.

Additionally, the remaining gas particles have more space to move around, which also leads to a decrease in pressure. This can be visualized in the drawing by the decrease in the number of gas particles and the increased distance between them as gas is removed from the container.

As the gas particles decrease, there are fewer particles to collide with the walls of the container and therefore less force is exerted on the walls. This results in a decrease in the pressure inside the container.

Read more about the behavior of gases:

https://brainly.com/question/13649307

#SPJ4

The strongest type of interaction that occurs between the atoms is hydrogen bond.(option c)

A hydrogen atom that is bound to a highly electronegative atom and another highly electronegative atom that is close by interact with one another to form hydrogen bonds, which are an unique kind of attractive intermolecular interactions. This process is known as hydrogen bonding.

As a result of hydrogen bonding, a hydrogen atom simultaneously forms a covalent bond with one electronegative atom and a hydrogen bond with the other. These are the prerequisites for hydrogen bonding:

1.A strongly electronegative atom connected to the hydrogen atom must be present in the molecule. The degree of polarization of the molecule increases with increasing electronegativity.

2.The electronegative atom should have a tiny size. The strength of the electrostatic attraction increases with decreasing size.

So, the hydrogen bonding is the strongest bond.

Learn more about hydrogen bond

brainly.com/question/15099999

#SPJ4

The initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.

The initial amount is the starting point for any financial transaction.

In order to calculate the initial amounts of x and y that will result in the formation of solid xy, the following equation must be used:
nx = ny * (4.1/kp)
where nx and ny are the moles of x and y, respectively, and kp is the equilibrium constant of the reaction.
Given the information provided, we can calculate the moles of x and y:
nx = ny * (4.1/4.1) = ny
ny = (22.4 L * 1 mol/22.4 L) = 1 mol
Therefore, nx = 1 mol and ny = 1 mol.
This means that if the reaction is carried out in a 22.4 L container, the initial amounts of x and y required to form solid xy are 1 mol of x and 1 mol of y.

To learn more about initial amount
https://brainly.com/question/26988374
#SPJ4

The reactivity of metals depends upon their position in the periodic table and their nature of undergoing chemical reactions.

The primary difference between metals is the ease with which they undergo chemical reactions. The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive. Such as alkali metals like Lithium, sodium, and potassium all react with water, thus they are reactive in nature than the metals belonging to alkaline earth metals. The nature of more reactivity of alkali metals is due to larger atomic radius and low ionization energies and they have only one valence electron in its outermost shell.

Thus, the reactivity of metals depends upon their position in the periodic table and their nature of undergoing chemical reactions.

To learn more about metals check the link below:

https://brainly.com/question/4701542

#SPJ4

No, one molecule does not make up a mole. In chemistry, the terms "mole" and "molecule" are used interchangeably.

The word "mole" is used to describe a quantity that cannot be expressed in terms of grams or milligrams. A mole thus counts the quantity of atoms, ions, or molecules.

A molecule is a type of chemical that develops when multiple atoms are combined by chemical bonding. Electrical charge does not exist in molecules. A molecule's constituent atoms may come from the same element or from separate elements. Varying molecules have different ratios between these atoms. Molecules are a unit of measurement for the quantity of molecules in a system.

The primary distinction between a mole and a molecule is that a mole is a unit of measurement for amount whereas a molecule is an atomized chemical species.

To learn more about mole click here

https://brainly.com/question/26416088

#SPJ4

Answer:

Explanation:

Answer: Correct option is B . calcium and iron  decrease the absorption of lead in the body.

Explanation: calcium and iron  decrease the absorption of lead in the body without affecting its solubility,probably by competing for shared absorptive receptors in the intestinal mucosa. The total body burden of lead does not affect lead absorption. Thus, lead does not have a feedback mechanism which limits absorption.

The solubility product constant (Ksp) for a substance is the equilibrium constant for the reaction between the dissolved ions of the substance and its solid form. In the case of Ca3(PO4)2, the equation for the reaction in water is: Ca3(PO4)2 (s) ↔ 3Ca2+ (aq) + 2PO43- (aq)

The solubility product constant, Ksp, for this reaction is represented by the equation:

Ksp = [Ca2+]^3 * [PO43-]^2Where [Ca2+] represents the concentration of calcium ions in molarity and [PO43-] represents the concentration of phosphate ions in molarity.

Solubility refers to the maximum amount of a substance that can dissolve in a given solvent at a given temperature and pressure. For example, the solubility of sugar in water is the maximum amount of sugar that can dissolve in water at a given temperature and pressure. The solubility of a substance can be influenced by temperature, pressure, and the presence of other dissolved substances.

Learn more about solubility product here:

https://brainly.com/question/857770

#SPJ4

Answer:

Yellow

Explanation:

The color of the equilibrium mixture of Iodine Monochloride and Chlorine is yellow. When the mixture is heated, it becomes darker brown in color.

To determine the pressure of a gas, we need to use the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

We can re-arrange the ideal gas law to solve for pressure:

P = (nRT) / V

We are given that the density of the gas is 3.10 g/L, which we can use to calculate the volume of the gas. Density is defined as mass/volume, so we can rearrange the equation to find volume:

V = mass/density

We know the density is 3.10 g/L, and the mass is n * molar mass of N2O.

Molar mass of N2O = (14.01 + 2 * 16.00) g/mol = 44.01 g/mol

The volume of the gas is:

V = mass / density = n * molar mass of N2O / 3.10 g/L

Now we have all the information needed to use the ideal gas law to determine the pressure of the gas.

We are given that the temperature of the gas is 298K.

We can use the ideal gas constant R = 0.0821 Latm/molK

Plugging in the known values:

P = (nRT) / V = (n * 0.0821 Latm/molK * 298K) / (n * molar mass of N2O / 3.10 g/L)

P = (0.0821 * 298) / (44.01 / 3.10) atm

To convert the pressure in atm to mmHg, we need to multiply the pressure by 760 (1 atm = 760 mmHg)

P = (0.0821 * 298) / (44.01 / 3.10) * 760 mmHg

The pressure of the N2O gas is approximately 739.07 mmHg at 298K and density of 3.10 g/L.

Learn more about Ideal Gas Law here: https://brainly.com/question/28257995

#SPJ4