False. The statement is incorrect. The likelihood of a vehicle losing control and rolling over does not increase solely based on the speed of the vehicle or the tightness of the turn due to centrifugal force.
In fact, centrifugal force itself does not directly cause a vehicle to lose control or roll over. Centrifugal force is an apparent force that acts outward from the center of rotation when an object is in circular motion. When a vehicle takes a turn, centrifugal force acts outward, attempting to pull the vehicle away from its original path. However, it is important to note that centrifugal force is not an actual force but rather an inertial effect resulting from the vehicle's inertia and its tendency to resist changes in motion.
The likelihood of a vehicle losing control and rolling over depends on several factors, including the vehicle's design, weight distribution, tire traction, suspension, driver skill, road conditions, and other external factors. It is not solely determined by centrifugal force.
At higher speeds or during tight turns, the forces acting on the vehicle, including the centripetal force (which counteracts the centrifugal force), become more significant. Properly designed vehicles with well-maintained tires and suspensions can handle higher speeds and tighter turns without losing control or rolling over. Skilled drivers who adjust their speed and steering appropriately can navigate turns safely, even when experiencing significant centrifugal forces.
It is important for drivers to follow safe driving practices, including obeying speed limits, maintaining proper vehicle control, and adjusting their driving behavior to suit the road conditions. Rollovers are typically caused by a combination of factors, such as excessive speed, sharp turns, loss of traction, and driver error, rather than solely being attributed to centrifugal force.
To know more about centrifugal force, please click on:
https://brainly.com/question/545816
#SPJ11
HOW does phenomenon/event IMPACTS or INFLUENCES the population and/or environment of the surrounding area
Answer:
Kindly check explanation
Explanation:
Our environment consists of various materials, structures and resources which are so naturally interrelated, the survival of a certain species depends on the wellbeing of the other. This could be buttressed from the definition of environment which simply means the entirety of factors, naturally occurring phenomenon around us. The pollution of the air affects the oxygen we breathe in due to contamination ad thus affects the health of those who Live within the affected area. Change in climatic condition, vegetation and other phenomenon will always affect the environment since the environment itself isn't just humans being but the entirety of conditions both natural occurring and others which keeps the live and the world in existence.
Someone Help me please
Answer:
a) Yes because spiderman isn’t part of the system (the train), so he exerts an external force on the system, causing it to slow. The sign is negative because the train is slowing negative.
b) The train was initially moving, so it had kinetic energy, the energy of movement. There isn’t the same amount anymore because spiderman did work onto the train. Work is defined by the change of kinetic energy of the system, so the train didn’t have the same amount of that type of energy at the end.
I hope this helps! :)
A 2.0kg pendulum swings from point A of a height of 0.10m to a point B of the same height. The heights are relative to the lowerst height. What is the change in gravitational potential energy from A to B?
A 2.0 kg pendulum swings from point A of height yA = 0.10 m to point B of the same height. The heights are relative to the lowest height.
What is the change in gravitational potential energy from A to B?
Answer: 0 J
What type of wave is this. I can figure it out
a load of 600 kg is lifted by a carne up to 60 meters in 6 minutes . calculate it work and power.
Explanation:
work=force*distance. force=load/10
___________
work=60*60=3600n
power=work/time(seconds)
Powe required is 1000
Explanation:
-Given: M= 600kg H: 60
-Time of operation: t = 6 min = 360 seconds
-Work done in lifting boxes: w= mgh (600 x 10 x 60) = 360,000
-Power required: p=[tex]\frac{w}{t} = \frac{360000}{360} = 1000[/tex]
ANSWER QUCIK
PLS THANK YOU
Three identical resistors have an equivalent resistance 15.6 ohm when they are connected in series. What is the resistance for each resistor
Answer:
5.2 Ω.
Explanation:
What is the resistance for each resistor
Since the resistors are connected in series and each have resistance R, and their equivalent resistance is R' = 15.6 Ω.
Since they are connected in series, R' = R₁ + R₂ + R₃
Since R₁ = R₂ = R₃ = R
R' = R + R + R = 3R
R' = 3R
R = R'/3
R = 15.6 Ω/3
R = 5.2 Ω
So, the resistance of each resistor is 5.2 Ω.
A 0.15 kg. baseball flies rightward at 15m/s to hit a tennis ball flying at it from
the opposite direction of 22 m/s. The baseball and the tennis ball have a
final speed of 1.2 m/s and 13 m/s respectively, both to the right.
What is the mass of the tennis ball?
(w/solution)
READ ALL PLEASE
So I have been giving away points
But now that i have a lot I shall do another points give away yes
Now hurry and add a answer :V
Answer:
can I have please I will follow u..............
A 6000 kg African elephant walks 13 meter
around the park. Determine the acceleration of
an African elephant in m/s2 if it has a work
done of 500J.
Which of the following Resistors A, B, C or D, would use the least power? Make
your claim, give evidence and explain your reasoning. You may use math to support
your claim.
Please Help.
i think the answer is D 10.0
pls help i’ll give brainliest if you give a correct answer!!
Answer: The gravitational force acting on the table.
Explanation:
Give Ideas to create hearing instruments to fix hearing problems in space, as you know sound waves can’t travel through empty space.
How much heat is required to raise the temperature of 2.0 kg of concrete from 10C to 30C? (The specific heat of concrete is 880 j/kg-C.)
A. 22 J
B. 88 J
C. 8800 J
D. 35200 J
Answer:B
Explanation:
Please define newtons 1st law of motion.
Explanation:
Newton's first law states that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.
A clock which has a brass pendulum beats second correctly when the temperature of
the room is 30°c. It gains the time 15.55 sec per day when the temperature of the
rooms falls to 10°C. Find the linear expansivity of brass.
Answer:
- 0.0481666 °C^-1
Explanation:
Linear expansivity of brass, α
α = (2T - 2T0) / T0.dt
T0 = 30°
dt = change in temperature = 30 - 10 = 20°C
T = 15.55 sec
α = (2*15.55 - 2*30) / 30*20
α = (31.1 - 60) / 600
α = - 28.9 / 600
α = - 0.0481666 °C^-1
Based from the flow chart, what can you generalize about the formation of typhoons? How do typhoons develop?
Answer: Warm water from the ocean is needed to develop typhoon
Pls Rate this as Brilliant Answer thank you :) keep on learning
Typhoons form when strong winds blow into warm areas of the ocean. These winds pick up moisture and rise, bringing colder air with them. This creates pressure, causing the winds to move quickly. The winds revolve or spin around a central point known as an eye.
What is typhoon ?A typhoon is a mature tropical cyclone that forms in the Northern Hemisphere between 180° and 100°E. The Northwestern Pacific Basin is the most active tropical cyclone basin on Earth, accounting for nearly one-third of the world's annual tropical cyclones.
The Philippines is just above the equator and faces the western Pacific, with little else to absorb storm energy before it reaches land. Storms are fueled by warm, tropical waters, which produce approximately 20 typhoons per year.
Hurricanes and typhoons can wreak havoc on coastlines and hundreds of miles inland. They can generate winds of up to 155 mph, as well as tornadoes and microbursts.
Thus, Typhoons form when strong winds blow into warm areas of the ocean.
To learn more about typhoon, follow the link;
https://brainly.com/question/1933929
#SPJ5
ANSWER THE ALL THE QUESTIONS IN THE FOLLOWING FOR 90 POINTS!
25
89
105
99
I don't know. I'm sorry
pls help i’ll give brainliest if you give a correct answer!!
if a person is 6.25 m away from a 60.0 w speaker, what is the sound level they are hearing?
(treat the speaker as a point source.)
Answer:
111dB
Explanation:
First, find the intensity of the sound using the formula I = Power / 4 x pi x radius ^2
So
60.0 / (4 x 3.14 (6.25)^2)
= 0.122
Then plug that into the equation to find sound level, which is 10log( I / Io)
Io being (1 x 10^-12)
So
10log(0.122 / 1 x 10^-12)
= 111dB
Hope this helps :)
Please help!!!!!!:>>>>>>
Answer: 6V
Explanation: parallel circuit, the voltage is the same for each resistor.
If the total force acts in the opposite direction as the cabinet is sliding, the cabinet would
A) slow down
B) speed up
C) remains the same speed
D) slow down, change direction and then speed up going the other way
E) remains the same speed, but changes direction
pls help i’ll give brainliest if you give a correct answer!!
Answer:
B
Explanation:
︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎
plzz answer fast, plzz help mee
Will mark as brainliest !! plz answer it
Plzzz answer with explnation!!!
the value of acceleration due to gravity (g) will be maximum at:
.
a) 1/2 of the radius of earth
b) 1/4 of the radius of earth
c) 1/8 of the radius of earth
Let the displacement function of a particle is x(t)=(20t^2-15t+200). Find the total displacement, instantaneous velocity and instantaneous acceleration
Answer:
A.) 39.5 m
B.) 0
C.) 60m/s^2
Explanation:
Given that a displacement function of a particle is x(t)=(20t^2-15t+200).
To Find the total displacement,
Reduce everything by dividing them by 5
X(t) = 4t^2 - 3t + 40 ...... (1)
For instantaneous velocity, differentiate x(t). That is,
dy/dt = 60t - 15 ...... (2)
But dy/dt = velocity.
If dy/dt = 0, then
60t - 15 = 0
60t = 15
t = 15/60
t = 0.25s
Substitutes t in equation (1)
Total displacement will be
X(t) = 4(0.25)^2 - 3(0.25) + 40
X(t) = 0.25 - 0.75 + 40
Total displacement = 39.5 m
To calculate instantaneous velocity, substitute t into equation (2)
V = 60 (0.25) - 15
V = 0.
and to find instantaneous acceleration, differentiate dv/dt
dv/dt = 60
Therefore, acceleration = 60 m/s^2
An 850 kg elevator is accelerating upwards at 3.0 m/s2. Calculate the tension in the cable.
Answer:
10880N
Explanation:
We are given that
Mass of elevator, m=850 kg
Acceleration, [tex]a=3m/s^2[/tex]
[tex]g=9.8m/s^2[/tex]
We have to find the tension in the cable.
We know that
When elevator is accelerating upward then tension in the cable
[tex]T=m(a+g)[/tex]
Using the formula
[tex]T=850(3+9.8)[/tex]
[tex]T=10880N[/tex]
i’m like kinda bad at physics so ya please help
Answer:
99 joules.
Explanation:
Let m denotes mass of the object and v denotes velocity.
If mass has units of kilograms and the velocity has units of meters per second then the kinetic energy has units of joules.
Kinetic energy is an energy possessed by a body in motion.
Mass (m) = 99 kg
Velocity (v) = 2 m/s
To find kinetic energy, use the following formula:
Kinetic energy = [tex]\frac{1}{2}mv^2=\frac{1}{2}(99)(2)=99[/tex] joules
Identify the following as
Potential Energy or Kinetic Energy
1. A car in the driveway. Potential energy
2. Matt rolling down a hill. Kinetic energy
3. Katie and Leo kissing.
4. A battery on my desk.
5. The water just before it goes down a waterfall.
6. A lawnmower running.
7. Mrs. Rey yelling at you.
8.A toy
9.A table with a spread of food
10. The kids playing on the bus.
A spring with k = 33.5 N/m has a
1.20 kg mass attached. It is pulled
0.120 m and released. How much
mechanical energy does it have?
(Unit = J)
Answer:
M.E = 0.241 Joules.
Explanation:
Given the following data;
Spring constant, k = 33.5 N/m
Extension, e = 0.12m
Mass = 1.20kg
To find the mechanical energy (M.E);
Mathematically, mechanical energy is given by this formula;
M.E = ½ke²
Where;
k is the constant of elasticity (spring constant). e is the extension of the string.Substituting into the equation, we have;
M.E = ½*33.5*0.12²
M.E = ½*33.5*0.0144
M.E = 0.4824/2
M.E = 0.241 Joules.
An object’s momentum includes its __________.
Answer: Momentum can be defined as "mass in motion
Explanation: