Answer:
E = 3.8 kJ
Explanation:
Given that,
The mass of the object, m = 10 g = 0.01 kg
The heat of fusion of aluminum is 380 kJ/kg
We need to find the energy required to melt the mass of the aluminium. It can be calculated as follows:
E = mL
So,
E = 0.01 × 380
E = 3.8 kJ
So, the energy required to melt the mass is equal 3.8 kJ.
Hey guys Im Anushka from India... pls help me out in this question..
What is linear motion?
What is rotational motion?
Answer:
Linear motion, also called rectilinear motion, is one-dimensional motion along a straight line, and can therefore be described mathematically using only one spatial dimension.
Explanation:
Rotation around a fixed axis is a special case of rotational motion. The fixed-axis hypothesis excludes the possibility of an axis changing its orientation and cannot describe such phenomena as wobbling or precession
a beaker contain 300ml of water.what is the volume in centi meter cube
Answer:
300cm^3
Explanation:
1ml = 1cm^3
=>300 ml = 300 cm^3
1 .
crest
the energy of light
2 .
wavelength
makes it possible to see things
3 .
light
a source of light
4 .
X-rays
top of wave
5 .
sun
bottom of wave
6 .
radiant
distance from one point on one wave to the same point on the next wave
7 .
trough
longer wavelengths than visible light
8 .
infrared light
shorter wavelengths than visible light
Answer:
Find answers below.
Explanation:
1. Radiant: the energy of light.
2. Light: makes it possible to see things.
3. Sun: a source of light. This source of light is referred to as solar energy and it's renewable source of energy.
4. Crest: top of wave. Thus, it's typically the highest part of an electromagnetic wave.
5. Trough: bottom of wave. Thus, it's typically the lowest part of an electromagnetic wave.
6. Wavelength: distance from one point on one wave to the same point on the next wave.
7. Infrared light: it has longer wavelengths than visible light.
8. X-rays: shorter wavelengths than visible light.
Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.
An electromagnetic spectrum refers to a range of frequency and wavelength that an electromagnetic wave is distributed or extends. The electromagnetic spectrum comprises of gamma rays, visible light, ultraviolet radiation, x-rays, radio waves, and infrared radiation.
Sometimes people state that speed and velocity are the same. People make such a mistake because they forget that velocity describes both speed and——————
Answer:
Time
Explanation:
To find velocity (also known as distance), you need both the speed and time.
1o4 Fahrenheit is equal to
Answer:
40 degrees Celsius
Explanation:
Have a great summer :)
used to measure temperature
used to measure force
prefix that means 1/100
prefix that means 1,000
prefix that means 1/1,000
Answer:
prefix that means 1/100 = Centi
prefix that means 1,000 = Kilo
prefix that means 1/1000 = Milli
Explanation:
A room has a rectangular shape of 4000 mom by 3600mm according to the architecture plan It is supposed to be fitted with tiles which are square in shape and size of 12 cm. How many tiles are required to cover the entire floor
Explanation:
First find the area of the entire floor:
Area of a rectangle= length × width
( 4000mm× 3600mm)
14400000mm²
Area of one square tile??= side ×side
12cm×12cm
144cm²
Convert cm to mm
1cm²=100mm²
144cm²=144cm²/1cm²×100mm²
=14,400mm²
Number of tiles required to cover the entire floor= 14400000mm²/14400mm²
=1000
A cell has an emf of 1.5 V and an internal resistance of 0.65 Q.
The cell is connected to a resistor R.
[0[8].[4] State what is meant by an emf of 1.5 V.
[2 marks]
I
[0] 8]-[2] The current in the circuit is 0.31 A.
Show that the total power output of the cell is approximately 0.47 W.
[1 mark]
[o[s).[3] Calcutate the energy dissipated per second in resistor R.
[2 marks]
energy dissipated per second = Ist
[o[si.[4] The cell stores 14 kJ of energy when it is fully charged. The cell's emf and internal resistance are constant as the cell f discharged.
Calculate the maximum time during which the fully-charged cell can deliver energy to
resistor R.
[2 marks)
maximum time = 5
Answer:
14000 J / 0.40 J/s = 35 000 s or about 9.75 hrs
Difinition of peel?and write the main point
Answer:
PEEL writing offers writers the ability to write through a structure. It helps to express your ideas and opinions to the reader in writing a PEEL paragraph.
Explanation:
PEEL writing gives your thoughts a deep perception. The writing techniques are very simple, but they can be complicated.
The Point, Evidence, Explanation and Link is an acronym for PEEL. All of them belong to the paragraph. The main way to master PEEL writing is consistent practise. You will find it very easy to learn when you understand the nature of the essay. Other important aspects of writing are planning and research.
Point:-
This is the most important, because it is the first part of the paragraph. The first sentence describes the point to be discussed in the entire paragraph. The opening phrase is the subject phrase. To make them understand the whole paragraph, the first sentence should be clear to the audience.
This section is also a key part of the essay. After you have written an analysis, you have a clear idea of what the reader can convey.
scientific investigations
Please help!!! I will mark brainliest asap, this is due in 10 minutes!
Answer:
speed
(distance per time)
Kathy is faster btw
ayuda!!!!!!!!!!! es para ahora :((
The drone can fly for 25 minutes before the battery needs recharging.
The power output of the battery is 65.0 W
Calculate the maximum energy stored by the battery.
Answer:
105.6 KJ
Answer
3.7/5
4
hope this will help you friend.
Which is affected more by an earthquake, : deep sea or less deep sea???
Answer:
deep sea will obviously be more affected because of the sea floor shaking
Answer:
deep see
because of the earth inside part highly pressure
What is the activity of a source that emits 1,200 particles per minute?
A. 1,200 Bq
B. 20 Bq
C. 72,000 Bq
What is the activity of a source that emits 1,200 particles per minute?
[tex]\boxed{ B. \:20 \:Bq }[/tex]
Explanation:
20 Bq is the activity of a source that emits 1,200 particles per minute. Activity is the number of decays per second. The SI unit for activity is becquerel (Bq).
[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]
Answer:
B) 20 Bq
The activity of a source that emits 1,200 particles per minute is 20 Bq.
-------------------------
☆hope it helps
☆have a great day!!
HELPPP I don't understand this omg
Answer:
unbalanced
750
forward
Explanation:
Basically fill in the blanks
what is the Young's modulus of a perfect rigid body
Answer:
Infinite
Explanation:
Young's modulus is infinite and bulk modulus is zero.
Answer:
Young's modulus is the ratio of tensile stress ( force of elasticity ) to tensile strain ( extension ).
Explanation:
[tex]E = \frac{stress}{strain} [/tex]
1 .
the ratio of work output to work input or the ratio of AMA to IMA
efficiency
2 .
the energy of a moving object
kinetic energy
3 .
a grooved wheel over which a rope can move
pulley
4 .
a double-sided inclined plane
screw
5 .
an inclined plane wrapped around a cylinder
wedge
Answer:
1. Efficiency
2. Kinetic energy
3. Pulley
4. Screw
5. Wedge
Explanation:
1. Efficiency: the ratio of work output to work input or the ratio of actual mechanical advantage (AMA) to ideal mechanical advantage (IMA).
Mathematically, the efficiency of a machine is given by the formula;
[tex] Efficiency = \frac {MA}{IMA} * 100 [/tex]
2. Kinetic energy: the energy of a moving object. Kinetic energy (KE) is an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
3. Pulley: a grooved wheel over which a rope can move. It is made up of a wheel and rope which allows force to be multiplied such as in a drawing well.
4. Screw: a double-sided inclined plane. It is held in position and then used to tighten two or more objects together.
5. Wedge: an inclined plane wrapped around a cylinder. It can be used to split objects into halves.
gia tốc a và vận tốc v cùng chiều khi nào trong một chu kì dao động điều hòa ?
Explanation:
Khi một hạt thực hiện SHM Đang chuyển động từ vị trí cực biên về vị trí trung bình, thì vận tốc và gia tốc cùng hướng, tức là hướng về vị trí trung bình
What is the biggest similarity between sports in the United States and sports in other cultures?
PLEASE ANSWER QUICKLY!
Answer:
The first difference is fairly straightforward: other countries prefer other sports. While some aspects of American sports culture are universal there are other things that are sports-specific, such as the 7th-inning stretch at a baseball game or counting the steps of a basketball player after he fouls out.
Explanation:
Answer:
The first difference is fairly straightforward: other countries prefer other sports. While some aspects of American sports culture are universal there are other things that are sports-specific, such as the 7th-inning stretch at a baseball game or counting the steps of a basketball player after he fouls out.
Explanation:
explain why heating destroys the magnetism in a permanent magnet?
Answer:
Excessive heat causes atoms to move more rapidly, disturbing the magnetic domains. As the atoms are sped up, the percentage of magnetic domains spinning in the same direction decreases. This lack of cohesion weakens the magnetic force and eventually demagnetizes it entirely.
Two sound sources send identical waves of 20 cm wavelength out along the +x axis. At what minimum (non-zero) separation of the sources will a listener on the axis beyond them hear: (a) the loudest sound (b) the weakest sound?
Anwser this Question I will BrainElist You
Answer:
See explanation below
Explanation:
1) Mass
2) Mass
3) Weight
4) Weight
Spending more time with her grandchildren is most likely a short-term goal
for a person of which of these ages?
A. 20 years old
B. 10 years old
C. 30 years old
D. 60 years old
Answer:60
Explanation:
When is the kinetic energy of the ball zero and when is it at its highest? When is its potential energy at its lowest and at its highest? What happens to the kinetic energy and potential energy between point A and point B? (3 points)
Answer:
if there is only one planet in the universe and the ball is there it will have 0 kinetic energy if the ball is in the very center of that planet only if the planet itself is absolutely motionless. its at its highest if the planet is moving away from the ball at a slightly faster speed forever. Between point A and B both potential energy and kinetic energy are at perfect 0.
Explanation:
never will have a measurable kinetic or potential energy status unless every single object is included in the calculation.
A fiber-optic rod consists of a central strand of material surrounded by an outer coating. The interior portion of the rod has an index of refraction of 1.97. If all rays striking the interior walls of the rod with incident angles greater than 50.4° are subject to total internal reflection, what is the index of refraction of the coating?
Answer:
The refractive index of the outer coating is 1.52.
Explanation:
Refractive index of interior part, n' = 1.97
critical angle, C = 50.4°
Let the refractive index of the coating is n.
Use the Snell's law,
[tex]n\times sin r = n'\times sinC\\\\n\times sin 90 = 1.97 \times sin 50.4\\\\n = 1.52[/tex]
An elevator of 3 × 10^4N is raised to a height of 100m in 20s . The work done by electric motor is equivalent to?
Answer:
there it is fella tried on ma own observation
Explain how you would apply any five pricing techniques to attract customers
Answer:
Explanation:
1. DECOY PRICING
This occurs when customers make a purchase they must often choose between products with different prices and attributes.
This method of pricing is meant to influence the consumer's purchasing decision and maximise the sales of one particular product. The seller will offer at least three products; two of the products will have a similar or equal price. The two products with the similar prices should be the most expensive ones, and one of the two should be less attractive than the other.
2. LOSS LEADER
This is when a product is sold at a low price (often without profit) in order to stimulate other profitable sales or to attract new customers.
The main is that it will help the business to expand their market share as a whole. It's common practice when first entering a market as it introduces new customers to a service or product in the hope of building a customer base and securing future
3.ODD PRICING
This is a method of psychological pricing a product. Prices ending in 9, 95, 97, 99 are sometimes called “charm prices” and in this type of pricing, the seller fixes a price where the last digits are odd numbers. This is intended to give the buyer no room for manœuvering or for bargaining as the price appears to be less - a product priced at £9.99 will seems much cheaper than one priced at £10.00
4. PRICE DISCRIMINATION
The purpose of price discrimination is to capture the market's consumer surplus and generate the most revenue possible for a product. Identical goods or services are sold at different prices from the same provider to different segments of the market. Industries that commonly use price discrimination include the travel industry, pharmaceuticals and textbook publishers.
5. PRODUCT BUNDLE PRICING
Using this method, sellers will combine several products in the same package. It also serves to move old stock. Blu-ray and videogames are often sold using the bundle approach once they reach the end of their product life cycle. This technique is used at auctions where one attractive item may be included in a lot with a box of less interesting things. Buyers must bid for the entire lot. It’s a good way of moving slow selling products, and in a way is another form of promotional pricing.
A car travels first 30 km at a uniform speed of 20 km
/hr and went 30 km at a uniform speed of 40 km/hr
Find its average speed in km/hr
Answer:
20 = 30 / t1
t1 = 3/2
40 = 30 / t2
t2 = 3/4
average speed = total distance / total time taken
= 30 + 30 / 3/2 + 3/4
= 60 /9/4
= 60 × 4/9
= 26.667
Hai xe chuyển động trên cùng một đoạn đường , khi xe (1) ở A thì xe (2) ở B phía trước với AB=5km . Xe (1) đuổi theo xe (2) . Tại C cách B một đoạn BC=10km thì xe (1) đuổi kịp xe (2) . Tìm tỉ số vận tốc của hai xe
Answer:
b
Explanation:
because it shows you it