Chris races his Audi north down a road for 1000 meters in 20 seconds, what is his velocity?

Answer:

This relationship is explained by Ohm's law

Explanation:

Ohm's law states that the current flowing through a circuit or a resistor is directly proportional to the voltage across the resistor and inversely proportional to the resistance. Where current is i, voltage is v and resistance is r, Ohm's law can be represented mathematically as

V= IR

Answer:

I chose c because it is the greater slope at point c

Answer:

the answer is C

Explanation:

you said its c

The question is incomplete. Here is the complete question.

A current in the long, straight wire, which lies in the plane of rectangular loop, that also carries a current, as shown in the figure.

Find the magnitude of the net force exerted on the loop by the magnetic field created by the long wire. Answer in units of N.

Answer: Net Force = [tex]50.215.10^{-7}[/tex]N

Explanation: Force and Magnetic field are related through the following formula:

F = I.L.B.sinθ

Magnetic field (B) in a straight long wire is given by

[tex]B=\frac{\mu_{0}.I}{2.\pi.r}[/tex]

in which

[tex]\mu_{0}[/tex] is permeability of free space and is [tex]4.\pi.10^{-7}[/tex]T.m/A

I is current in the wire;

r is distance to the wire;

Examining the square loop and using the right hand rule, the top, which we will name it F₂, and the bottom, named F₄, have angle θ = 0, giving sin(0) = 0 and therefore, F₁ = F₃ = 0.

So, for the net force, the relevant forces will be on the sides parallel to the wire.

For the other forces, angle is 90°, sin(90°) = 1, then:

F = I.L.B

Replacing magnetic field:

F = [tex]\frac{\mu_{0}.I_{w}.L.I_{l}}{2.\pi.r}[/tex]

Note: The side closest to the wire is F₁, while the farthest is F₃.

Note2: As the constant unit is in meters, distance and length of side of the square loop are also in meters.

Calculating forces:

F₁ = [tex]\frac{4*\pi*10^{-7}*4.3*0.19*14}{2.\pi.0.082}[/tex]

F₁ = [tex]278.975*10^{-7}[/tex]N

Current in F₃ is flowing thoruhg the negative side of the referential, so:

F₃ = [tex]-\frac{4*\pi*10^{-7}*4.3*0.19*14}{2.\pi.0.1}[/tex]

F₃ = [tex]-228.76*10^{-7}[/tex]N

Net force is total force:

[tex]F_{net} = F_{1}+F_{3}[/tex]

[tex]F_{net}=(278.975-228.76).10^{-7}[/tex]

[tex]F_{net}=50.22.10^{-7}[/tex]

The total force acting on the square loop is [tex]F_{net}=50.22.10^{-7}[/tex]N.

Answer:

A. land use

Explanation:

Answer:

a

Explanation:

Answer:

(a) The kinetic energy of the bowling ball just before it hits the matress is 102.974 joules.

(b) The work done by the gravitational force of Earth on bowling ball during the first part of the fall is 102.974 joules.

(c) Work done by gravitational force on bowling ball when mattress is compressed is 10.298 joules.

(d) The work done by the mattress on the bowling ball is 113.272 joules.

Explanation:

The statement is incomplete. The complete question is:

In a mattress test, you drop a 7.0 kg bowling ball from a height of 1.5 m above a mattress, which as a result compresses 15 cm as the ball comes to a stop.

(a) What is the kinetic energy of the ball just before it hits the mattress?  

(b) How much work does the gravitational force of the earth do on the ball as it falls, for the first part of the fall (from the moment you drop it to just before it hits the mattress)?  

(c) How much work does the gravitational force do on the ball while it is compressing the mattress?

(d) How much work does the mattress do on the ball? (You’ll need to use the results of parts (a) and (c)）

(a) Based on the Principle of Energy Conservation, we know that ball-earth system is conservative, so that kinetic energy is increased at the expense of gravitational potential energy as ball falls:

[tex]K_{1}+U_{g,1} = K_{2}+U_{g,2}[/tex] (Eq. 1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Kinetic energies at top and bottom, measured in joules.

[tex]U_{g,1}[/tex], [tex]U_{g,2}[/tex] - Gravitational potential energies at top and bottom, measured in joules.

Now we expand the expression by definition of gravitational potential energy:

[tex]U_{g,1}-U_{g,2} = K_{2}-K_{1}[/tex]

[tex]K_{2}= m\cdot g \cdot (z_{1}-z_{2})+K_{1}[/tex] (Eq. 1b)

Where:

[tex]m[/tex] - Mass of the bowling ball, measured in kilograms.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]z_{1}[/tex], [tex]z_{2}[/tex] - Initial and final heights of the bowling ball, measured in meters.

If we know that [tex]m = 7\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]z_{1}= 1.5\,m[/tex], [tex]z_{2} = 0\,m[/tex] and [tex]K_{1} = 0\,J[/tex], the kinetic energy of the ball just before it hits the matress:

[tex]K_{2} = (7\,kg)\cdot \left(9.807\,\frac{m}{s^{2}}\right)\cdot (1.5\,m-0\,m)+0\,m[/tex]

[tex]K_{2} = 102.974\,J[/tex]

The kinetic energy of the bowling ball just before it hits the matress is 102.974 joules.

(b) The gravitational work done by the gravitational force of Earth ([tex]\Delta W[/tex]), measured in joules, is obtained by Work-Energy Theorem and definition of gravitational potential energy:

[tex]\Delta W = U_{g,1}-U_{g,2}[/tex]

[tex]\Delta W = m\cdot g\cdot (z_{1}-z_{2})[/tex] (Eq. 2)

If we know that [tex]m = 7\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]z_{1}= 1.5\,m[/tex] and [tex]z_{2} = 0\,m[/tex], then the gravitational work done is:

[tex]\Delta W = (7\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (1.5\,m-0\,m)[/tex]

[tex]\Delta W = 102.974\,J[/tex]

The work done by the gravitational force of Earth on bowling ball during the first part of the fall is 102.974 joules.

(c) The work done by the gravitational force of Earth while the bowling when mattress is compressed is determined by Work-Energy Theorem and definition of gravitational potential energy:

[tex]\Delta W = U_{g,2}-U_{g,3}[/tex]

Where [tex]U_{g,3}[/tex] is the gravitational potential energy of the bowling ball when mattress in compressed, measured in joules.

[tex]\Delta W = m\cdot g \cdot (z_{2}-z_{3})[/tex]

Where [tex]z_{3}[/tex] is the height of the ball when mattress is compressed, measured in meters.

If we know that [tex]m = 7\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]z_{2}= 0\,m[/tex] and [tex]z_{3} = -0.15\,m[/tex], the work done is:

[tex]\Delta W = (7\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot [0\,m-(-0.15\,m)][/tex]

[tex]\Delta W = 10.298\,J[/tex]

Work done by gravitational force on bowling ball when mattress is compressed is 10.298 joules.

(d) The work done by the mattress on the ball equals the sum of kinetic energy just before mattress compression and the work done by the gravitational force when mattress is compressed:

[tex]\Delta W' = K_{2}+\Delta W[/tex]

([tex]K_{2} = 102.974\,J[/tex], [tex]\Delta W = 10.298\,W[/tex])

[tex]\Delta W' = 113.272\,J[/tex]

The work done by the mattress on the bowling ball is 113.272 joules.

Answer:

We are given:

initial velocity (u) = 20m/s

acceleration (a) = 4 m/s²

time (t) = 8 seconds

displacement (s) = s m

Solving for Displacement:

From the seconds equation of motion:

s = ut + 1/2 * at²

replacing the variables

s = 20(8) + 1/2 * (4)*(8)*(8)

s = 160 + 128

s = 288 m

Answer:

The average force exerted on the superball by the sidewalk is 0.00122 N.

Explanation:

Given;

mass of the super ball, m = 50 g = 0.05 kg

initial velocity of the super bowl, u = -27 m/s (assuming downward motion to be negative)

final velocity of the super bowl, u = 17 m/s (assuming upward motion to be positive)

time of motion, t = 1800 s

The average force exerted on the superball by the sidewalk is given by;

[tex]F = ma\\\\F = \frac{m(v-u)}{t} \\\\F = \frac{0.05(17-(-27))}{1800}\\\\ F = \frac{0.05(44)}{1800}\\\\F = 0.00122 \ N[/tex]

Therefore, the average force exerted on the superball by the sidewalk is 0.00122 N.

Answer:

The half-life of carbon is too short.

Explanation:

The answer is B.

Answer:

im sure its A

Explanation:

Answer:

The change in internal energy of the system is 2,054 J

Explanation:

The first law of thermodynamics relates the work and the transferred heat exchanged in a system through internal energy. This energy is neither created nor destroyed, it is only transformed.

Taking into account that the internal energy is the sum of all the energies of the particles that the system has, you have:

ΔU= Q + W

where U is the internal energy of the system (isolated), Q is the amount of heat contributed to the system and W is the work done by the system.

By convention, Q is positive if it goes from the environment to the system, or negative otherwise, and W is positive if it is carried out on the system and negative if it is carried out by the system.

In this case:

Replacing:

ΔU= 0.523 kJ + 1.531 kJ

Solving:

ΔU= 2.054 kJ = 2,054 J (being 1 kJ=1,000 J)

The change in internal energy of the system is 2,054 J

Answer:

a constant variable?

Explanation:

A constant variable is any aspect of an experiment that a researcher intentionally keeps unchanged throughout an experiment.

Experiments are always testing for measurable change, which is the dependent variable. You can also think of a dependent variable as the result obtained from an experiment. It is dependent on the change that occurs

given info is... Acceleration(a)=2.6m/s^2

                       final velocity(v)=26.8m/s

                       initial velocity(u)=24.6m/s

need to find.... time(t)=?

[tex]a=\frac{v-u}{t} \\2.6=\frac{26.8-24.6}{t} \\\\[/tex]

[tex]t=\frac{v-u}{a}[/tex]

[tex]t=\frac{26.8-24.6}{2.6}[/tex]

[tex]t=0.846s[/tex]

Explanation:

It takes 0.84 second her car to accelerate from 24.6m/s to 26.8m/s.

Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting.

Given parameters:

Initial speed of the car: u = 24.6 m/s

Final speed of the car: v = 26.8 m/s.

Acceleration of the car: a = 2.6 m/s²

Time interval: t = ?

change is speed = final speed - initial speed

= 26.8 m/s - 24.6 m/s

= 2.2 m/s

From the definition of acceleration,

acceleration = change is speed / time interval

So, time interval  =  change is speed / acceleration

= 2.2 m/s/2.6 m/s²

= 0.84 second.

Hence, it takes 0.84 second her car to accelerate from 24.6m/s to 26.8m/s.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ2

Answer:

d, Due to all reasons in a, b and c​

Explanation:

All of the reasons from the choices can lead to errors in measurement. An error is an uncertainty introduced to a scientific process.

Errors can be due to the following reasons;

Answer:

Yes at A the mechanical energy is conserved.

Yes at B the part of mechanical energy is conserved potential energy and  kinetic energy and some is lost as frictional force.

Explanation:

Ratio = Eb/ Ea=  1058.3 J/2940 J= 0.3599

Ratio = Ec/ Eb= 0J/ 1058.3 J= 0

At point A the skater is at rest  or it is the starting point and the whole energy is due to the position of the  skater i.e= mgh = 50 *9.8*6=  2940 J

Since there's no movement there is no Kinetic energy = 0 J

Yes at A the mechanical energy is conserved.

At point B the skater has traveled for some of the distance . It has potential energy and  kinetic energy.

Yes at B the part of mechanical energy is conserved as potential energy and  kinetic energy.

The total Mechanical energy = 1058.3 J

At point B Total Mechanical energy = PE+ KE

1058.3J = 980 J + 78.3 J

1058.3 J = mgh + 1/2mv²

      = 50*2*9.8 + 1/2 *50*(8.85)²

       = 980 J + 78.3 J

As the total energy of the system must remain the same some of the mechanical energy is lost as frictional force at point B .

2940 J-1058.3 J= 1881.7

At Point C the skater has arrived at the end point and the height , speed, PE, KE and ME  all are zero.

(a) The ratio of the mechanical energy at B and mechanical energy at A is 0.36.

(b) The ratio of the mechanical energy at C and mechanical energy at A is 0.

(c) mechanical energy is conserved between a and b.

(d) mechanical energy is not conserved between b and c.

The given parameters;

The ratio of the mechanical energy at B and mechanical energy at A;

[tex]ratio = \frac{E_b}{E_a} = \frac{1058.3}{2940} = 0.36[/tex]

The ratio of the mechanical energy at C and mechanical energy at A;

[tex]ratio = \frac{E_c}{E_a} = \frac{0}{2940} = 0[/tex]

The change mechanical energy between A and B from the given position;

[tex]\Delta E = mg(h_b - h_a) - \frac{1}{2}m(v_b^2 - v_a^2)\\\\ \Delta E = 50\times 9.8(2-6) \ - \ \frac{1}{2} \times 50(8.85^2 - 0)\\\\\Delta E =- 1960 + 1960\\\\\Delta E = 0 \ J[/tex]

Thus, we can conclude that mechanical energy is conserved between a and b.

The change mechanical energy between A and B from the given position;

[tex]\Delta E = mg(h_c - h_b) - \frac{1}{2}m(v_c^2 - v_b^2)\\\\ \Delta E = 50\times 9.8(0-2) \ - \ \frac{1}{2} \times 50(0^2 - 8.85^2)\\\\\Delta E = -980 + 1960 \\\\\Delta E = 980 \ J[/tex]

Thus, we can conclude that mechanical energy is not conserved between b and c.

Learn more here:https://brainly.com/question/19969393

Complete Question

The complete question is shown on the first uploaded image

Answer:

The temperature change is [tex]\frac{dT}{dt} = 1.016 ^oC/m[/tex]

Explanation:

From the question we are told that

   The velocity field with which the bird is flying is  [tex]\vec V =  (u, v, w)= 0.6x + 0.2t - 1.4 \ m/s[/tex]

   The temperature of the room is  [tex]T(x, y, u) =  400 -0.4y -0.6z-0.2(5 - x)^2 \  ^o C[/tex]

    The time considered is  t =  10 \  seconds

    The  distance that the bird flew is  x  =  1 m

 Given that the bird is inside the room then the temperature of the room is equal to the temperature of the bird

Generally the change in the bird temperature with time is mathematically represented as

      [tex]\frac{dT}{dt} = -0.4 \frac{dy}{dt} -0.6\frac{dz}{dt} -0.2[2 *  (5-x)] [-\frac{dx}{dt} ][/tex]

Here the negative sign in [tex]\frac{dx}{dt}[/tex] is because of the negative sign that is attached to x in the equation

 So

       [tex]\frac{dT}{dt} = -0.4v_y  -0.6v_z -0.2[2 *  (5-x)][ -v_x][/tex]

From the given equation of velocity field

    [tex]v_x  =  0.6x[/tex]

    [tex]v_y  =  0.2t[/tex]

     [tex]v_z  =  -1.4 [/tex]

So

[tex]\frac{dT}{dt} = -0.4[0.2t]  -0.6[-1.4] -0.2[2 *  (5-x)][ -[0.6x]][/tex]    

substituting the given values of x and t

[tex]\frac{dT}{dt} = -0.4[0.2(10)]  -0.6[-1.4] -0.2[2 *  (5-1)][ -[0.61]][/tex]      

[tex]\frac{dT}{dt} = -0.8 +0.84 + 0.976[/tex]  

[tex]\frac{dT}{dt} = 1.016 ^oC/m[/tex]  

Answer:

From the Sun

Explanation:

Plants can't eat any food. They don't ue or need windmills to get energy. They are plants so they don't have any electrons. The only way that they can recive energy from is the sun. Sometimes plants die when they don't get enough sun because they don't have any energy to live.

Answer:

9.05m/s

Explanation:

given data

m1= 2700kg

v1=3.7m/s

m2=0.18kg

v2=9.05m/s

v3=?

We know that the velocity of the rhino will remains unchanged after impact as the mass of the rubber ball is negligible

m1v1+m2v2=m1v1+m2v3

2700*3.7+0.18*9.05=2700*3.7+0.18*v3

9990+1.629=9990+0.18v3

9991.629-9990=0.18v3

1.629=0.18v3

v3=1.629/0.18

v3=9.05m/s

Answer:

Average speed

Explanation:

250/50=5

1000/20=5

Answer:

The number of turns in the solenoid is 22366.

Explanation:

The number of turns in the solenoid can be found using the following equation:

[tex] B = \mu_{0} I\frac{N}{L} [/tex]

Where:

B: is the magnetic field = 8.90 T

L: is the solenoid's length = 0.300 m

N: is the number of turns =?

I: is the current = 95 A

μ₀: is the magnetic constant = 4π×10⁻⁷ H/m

By solving equation (1) for N we have:

[tex] N = \frac{BL}{\mu_{0} I} = \frac{8.90 T*0.300 m}{4\pi \cdot 10^{-7} H/m*95 A} = 22366 turns [/tex]

Therefore, the number of turns in the solenoid is 22366.

I hope it helps you!

Answer:

retina.

Explanation:

Answer:

Folding

Explanation:

Answer:

[tex]E_s = 277.13V[/tex]

Explanation:

Given

[tex]Load\ Voltage = 480V[/tex]

Required

Determine the voltage dropped in each stage.

The relation between the load voltage and the voltage dropped in each stage is

[tex]E_l = E_s * \sqrt3[/tex]

Where

[tex]E_l = 480[/tex]

So, we have:

[tex]480 = E_s * \sqrt3[/tex]

Solve for [tex]E_s[/tex]

[tex]E_s = \frac{480}{\sqrt3}[/tex]

[tex]E_s = \frac{480}{1.73205080757}[/tex]

[tex]E_s = 277.128129211[/tex]

[tex]E_s = 277.13V[/tex]

Hence;

The voltage dropped at each phase is approximately 277.13V

Answer:

F=1.3x10^-2N

Explanation:

Fe= k(6x10^-7C)^2/(0.5)^2

Electrical force of attraction between the balloons is F=1.3x10^-2N

The electric force of attraction between two balloons should be F=1.3x10^-2N.

Since The charge on the balloons is 6.0 x 10-7 C and they are separated by a distance of 0.50 m.

So, here the electric force is

Fe= k(6x10^-7C)^2/(0.5)^2

F=1.3x10^-2N

hence, The electric force of attraction between two balloons should be F=1.3x10^-2N.

Learn more about force here: https://brainly.com/question/19848845

Explanation:

hope this helps, have a good one :D

Answer:

60.12m

Explanation:

Distance = Velocity x Time

To use this formula we must first convert 110km/h to m/s, which we can do by dividing the value by 3.6:

110/3.6 = 30.56m/s (2dp)

Velocity = 30.56m/s

Time = 2s

Distance = 30.56x2

Distance = 61.12m

You travel 60.12m during this inattentive period.

Hope this helped!

Complete Question

The diagram for this question is shown on the first uploaded image

Answer:

The tension in the rope on the left of the mountain climber is [tex] T_a = 1106 \ N [/tex]

Explanation:

From the question we are told that

The weight of the mountain climber is m = 555 N

Generally from the diagram , the total amount of force acting on the rope along the vertical axis at equilibrium is mathematically represented as  

       [tex]T_a*  cos 65 -555 + T_b * cos(85) =  0[/tex]

Here  [tex]T_a, T_b[/tex] are the tension of the rope on the left and on the right hand side

 So

    [tex]0.423T_a   + 0.0871T_b  =  555[/tex]

=>   [tex] 0.0871T_b  =  555 - 0.423T_a[/tex]

=>   [tex] T_b  =  \frac{555 - 0.423T_a}{0.0871}[/tex]

Generally from the diagram , the total amount of force acting on the rope along the horizontal  axis at equilibrium is mathematically represented as

      [tex]T_a*  sin 65 - T_b * sin(85) =  0[/tex]

=>     [tex] 0.9063T_a - 0.9962T_b =  0[/tex]

=>     [tex] 0.9063T_a =   0.9962T_b [/tex]

=>     [tex] 0.9063T_a =   0.9962[\frac{555 - 0.423T_a}{0.0871}] [/tex]

=>     [tex] 0.9063T_a =   [\frac{552.891 - 0.421T_a}{0.0871}] [/tex]

=>    [tex] 0.0789T_a =   [552.891 - 0.421T_a[/tex]

=>    [tex] 0.4999T_a =   552.891 [/tex]

=>      [tex] T_a = 1106 \ N [/tex]

Answer:

A. Current power may decrease the fish population.

Explanation:

The statement that best describes the impact of ocean thermal power and current power on the environment is that current power may decrease the fish population.

The environment is made up of living and non-living components that co-exist and interact with one another.

Answer:

A

Explanation:

I took the test good luck :D

Answer:

Explanation:

The work done by an object can be found by using the formula

From the question

distance = 3 meters

force = 15 newtons

We have

workdone = 15 × 3

We have the final answer as

Hope this helps you