To convert time to hours from seconds, you have to divide the total seconds by 3600.
[tex]\dfrac{3600}{3600} =\texttt{1 hour}[/tex]
3600 seconds would be 1 hour.
A system releases 15Kj of energy as heat and does 10 Kj of work on surroudings, What is change in internal energy ?+10Kj25Kj-25Kj-5Kj
A system releases 15Kj of energy as heat and does 10 Kj of work on surroundings. The change in internal energy is 5 Kj.
The change in internal energy (ΔU) is given by the formula:
ΔU = Q - W
where Q is the heat energy added to or removed from the system, and W is the work done by or on the system.
Substituting the given values, we get:
ΔU = 15 Kj - 10 Kj = 5 Kj
For more question on energy click on
https://brainly.com/question/8101588
#SPJ11
The change in internal energy of the system is 5 kJ. This means that the system gained 5 kJ of internal energy.
The first law of thermodynamics states that the change in internal energy (ΔU) of a system is equal to the heat added to the system (Q) minus the work done by the system (W). Mathematically, this can be represented as:
ΔU = Q - W
In this problem, we are given that the system releases 15 kJ of energy as heat and does 10 kJ of work on the surroundings. We can substitute these values into the equation to find the change in internal energy:
ΔU = 15 kJ - 10 kJ
ΔU = 5 kJ
Therefore, the change in internal energy of the system is 5 kJ. This means that the system gained 5 kJ of internal energy.
It's important to note that the positive value for ΔU indicates that the internal energy of the system increased, meaning that the system absorbed more energy than it released to the surroundings. If ΔU had been negative, it would indicate that the system released more energy to the surroundings than it absorbed, meaning that the internal energy of the system decreased.
Learn more about internal energy here:
https://brainly.com/question/14668303
#SPJ11
Question 6 of 10
The bonds of the products store 27 kJ more energy than the bonds of the
reactants. How is energy conserved during this reaction?
A. The reaction uses up 27 kJ of energy when bonds break.
B. The surroundings absorb 27 kJ of energy from the reaction
system.
C. The reaction system absorbs 27 kJ of energy from the
surroundings.
D. The reaction creates 27 kJ of energy when bonds form.
Energy conserved during this reaction in this way; The reaction system absorbs 27 kJ of energy from the surroundings. Option C
what should you know about conserving or storing energy in this scenario?In the situation that has been described, it showss that the reaction is endothermic, which means it requires energy to proceed.
The bonds in the products store more energy than those in the reactants, and that extra energy has to come from somewhere, and the only explanation is that it came from the surroundings.
The energy is conserved because it is not lost or created; it is simply transferred from the surroundings to the system.
Find more exercises on energy conservation during a reaction;
https://brainly.com/question/2288857
#SPJ1
What is the reactance of a 9.00 μf capacitor at a frequency of 60.0 hz ?
The reactance of the 9.00 μF capacitor at a frequency of 60.0 Hz is approximately 294.524 ohms.
The reactance (Xc) of a 9.00 μF capacitor at a frequency of 60.0 Hz can be calculated using the formula:
Xc = 1 / (2 * π * f * C)
Where Xc is the capacitive reactance, π is approximately 3.14159, f is the frequency (60.0 Hz), and C is the capacitance (9.00 μF, or 9.00 × 10^-6 F).
Plugging in the values:
Xc = 1 / (2 * 3.14159 * 60.0 * 9.00 × 10^-6)
Xc ≈ 294.524 Ω
The reactance of the 9.00 μF capacitor at a frequency of 60.0 Hz is approximately 294.524 ohms.
To learn more about frequency, refer below:
https://brainly.com/question/5102661
#SPJ11
Three moles of an ideal gas expand at a constant pressure of 4 x 105 Pa from 0.020 to 0.050 m3. What is the work done by the gas? Select one: a. 1.2 x 104J b. 2.1 x 104 J c. 3.5 x 104 J d. 4.2 x 104 J
The correct option is a. The work done by the gas is 1.2 x 10^{4} J.
To calculate the work done by an ideal gas during a constant pressure expansion, we use the formula W = P * ΔV, where W represents work, P is the constant pressure, and ΔV is the change in volume. In this case, P = 4 x 10^{5} Pa, and ΔV = 0.050 m^{3} - 0.020 m^{3} = 0.030 m^{3}. Plugging these values into the formula, we get W = (4 x 10^{5} Pa) * (0.030 m^{3}), which results in W = 1.2 x 10^{4} J. Therefore, the work done by the gas is 1.2 x 10^{4} J, and the correct option is a.
Calculation steps:
1. Determine ΔV: ΔV = 0.050 m^{3} - 0.020 m^{3} = 0.030 m^{3}
2. Apply the formula W = P * ΔV: W = (4 x 10^{5} Pa) * (0.030 m^{3})
3. Calculate W: W = 1.2 x 10^{4} J
To know more about the work done visit:
https://brainly.com/question/30159785
#SPJ11
When an earthquake strikes it releases seismic waves that travel in concentric circles.a. Trueb. False
The statement "When an earthquake strikes it releases seismic waves that travel in concentric circles" is true. When an earthquake occurs,
the energy is released in the form of seismic waves that travel through the Earth's layers. These waves move in all directions from the point of origin, which is also known as the focus or hypocenter.
The seismic waves that are released during an earthquake travel through the Earth's crust, mantle, and core in concentric circles, similar to ripples that spread out from a rock dropped into a pond.
There are two types of seismic waves: primary waves (P-waves) and secondary waves (S-waves). P-waves are the fastest and travel through solid and liquid layers of the Earth,
while S-waves are slower and can only travel through solid materials. Both types of waves move in concentric circles, spreading out from the epicenter of the earthquake.
In conclusion, seismic waves released during an earthquake travel in concentric circles, and this statement is true. These waves can cause widespread damage to buildings and other structures,
which is why it is important to be prepared and have an emergency plan in place in case of an earthquake.
To know more aboutconcentric circles refer here
https://brainly.com/question/29917925#
#SPJ11
find the minimum diameter of a 49.5-m-long nylon string that will stretch no more than 1.49 cm when a load of 71.9 kg is suspended from its lower end. assume that ynylon = 3.51⋅⋅109 n/m2.
The minimum diameter of the nylon string is approximately 29.6 mm.
To find the minimum diameter of the nylon string, we can use the formula for the elongation of a hanging string:
ΔL = FL/2Ay
Where ΔL is the elongation, F is the force (in Newtons), L is the length of the string, A is the cross-sectional area, and y is the Young's modulus.
First, we need to convert the load of 71.9 kg to Newtons:
F = m*g = (71.9 kg)*(9.81 m/s^2) = 705.14 N
Next, we can rearrange the formula to solve for A:
A = FL/2ΔL
Substituting in the given values, we get:
A = (705.14 N)*(49.5 m)/(2*(0.0149 m)*(3.51*10^9 N/m^2))
A = 5.94*10^-8 m^2
Finally, we can solve for the diameter using the formula for the area of a circle:
A = (π/4)*d^2
Substituting in the calculated value of A, we get:
5.94*10^-8 m^2 = (π/4)*d^2
Solving for d, we get:
d = √(4*(5.94*10^-8 m^2)/π)
d = 3.88*10^-4 m
Therefore, the minimum diameter of the nylon string is 3.88*10^-4 m.
To know more about diameter visit :-
https://brainly.com/question/5501950
#SPJ11
material that falls back to the lunar surface after being blasted out by the impact of the space object is called
The material that falls back to the lunar surface after being blasted out by the impact of a space object is called "ejecta."
When a space object, such as a meteoroid or asteroid, impacts the lunar surface, it excavates and ejects material from the Moon. This material is referred to as "ejecta." Ejecta consists of a mixture of lunar soil, rock fragments, and vaporized debris that was forcibly expelled from the impact site. As the ejecta is launched into space, it follows a ballistic trajectory, influenced by the Moon's gravity, before eventually falling back to the lunar surface. The composition and distribution of the ejecta provide valuable insights into the impact event, including the size and velocity of the impacting object, and can also contribute to the accumulation of regolith and the formation of impact craters on the Moon.
Learn more about lunar surface here:
https://brainly.com/question/30756729
#SPJ11
a freshly caught catfish is placed on a spring scale, and it oscillates up and down with a period of 0.207 ss .If the spring constant of the scale is 2160 N/m, what is the mass of the catfish?
If the spring constant of the scale is 2160 N/m, the mass of the catfish is approximately 0.455 kg.
To find the mass of the catfish, we need to use the formula for the period of an oscillating spring, which is:
T = 2π√(m/k)
Where T is the period, m is the mass, and k is the spring constant. Rearranging this formula, we get:
m = (T^2 * k)/(4π^2)
Substituting the given values, we get:
m = (0.207^2 * 2160)/(4π^2)
m ≈ 0.455 kg
Therefore, the mass of the catfish is approximately 0.455 kg. This calculation assumes that the spring scale is ideal and there is no friction or damping in the system. It is important to note that the accuracy of the measurement can be affected by these factors and may need to be taken into account for more precise measurements.
For more question on mass
https://brainly.com/question/86444
#SPJ11
To find the mass of the catfish, we need to use the equation T=2π√(m/k), where T is the period, m is the mass, and k is the spring constant. We are given T=0.207 s and k=2160 N/m, so we can solve for m. Rearranging the equation, we get m=(T^2*k)/(4π^2). Plugging in the values, we get m=(0.207^2*2160)/(4π^2)=1.05 kg.
Therefore, the mass of the catfish is approximately 1.05 kg. The spring constant of the scale is important because it determines how much the spring will stretch when a force is applied. In this case, the oscillation of the spring is directly related to the mass of the catfish and the spring constant of the scale. It is a constant that is unique to the spring and is necessary to determine the mass accurately.
To learn more about mass click here: brainly.com/question/19694949
#SPJ11
why is it that most astronomers believe we are living in the ""age of exploration"" for astronomy? what are some of the explorations that have taken place in the last 60 years?
Most astronomers believe we are living in the "age of exploration" for astronomy due to significant advancements in technology, observational capabilities, and our understanding of the universe.
In the last 60 years, several explorations have taken place, revolutionizing our knowledge of the cosmos. One major exploration has been the launch and utilization of space telescopes. Instruments like the Hubble Space Telescope, launched in 1990, have provided breathtaking images and invaluable data, expanding our understanding of distant galaxies, stellar evolution, and the age of the universe. Additionally, the Kepler Space Telescope, launched in 2009, has discovered thousands of exoplanets, leading to groundbreaking insights into planetary systems and the potential for life beyond Earth. Advancements in ground-based observatories have also contributed to the age of exploration. Large-scale telescopes equipped with advanced detectors and adaptive optics technology have enabled astronomers to observe celestial objects with remarkable clarity and detail. These observatories have played a vital role in studying cosmic phenomena, such as black holes, pulsars, supernovae, and the cosmic microwave background radiation. Moreover, significant discoveries have been made in the field of cosmology. The development of precise measurements, such as the cosmic microwave background radiation and the accelerated expansion of the universe, has deepened our understanding of its origins and evolution. The detection of gravitational waves, first observed in 2015, has opened a new window for studying the universe, providing insights into phenomena like neutron star mergers and black hole dynamics.
Learn more about "age of exploration" for astronomy here:
https://brainly.com/question/5165144
#SPJ11
asteroid-sized bodies that collide and accumulate together, ultimately forming planets are called ________.
Asteroid-sized bodies that collide and accumulate together, ultimately forming planets are called planetesimals. These objects undergo gravitational interactions and accretion processes during their formation.
Asteroid-sized bodies that collide and merge to form planets are called planetesimals. Planetesimals are the building blocks of planets and are typically composed of rock, dust, and ice. They are remnants of the early solar system's protoplanetary disk, a rotating disk of gas and dust from which planets form. As these planetesimals orbit the young star, their gravitational interactions and collisions cause them to grow in size. Through a process known as accretion, smaller planetesimals collide and merge together, gradually forming larger and larger bodies. Over time, these accumulated planetesimals become massive enough to exert a strong gravitational pull and shape themselves into fully formed planets.
Learn more about Asteroid-sized here:
https://brainly.com/question/31948258
#SPJ11
The foreman shouts at John to hurry up and he increases his pushing force to 50N. Calculate the wheelbarrow's acceleration
The foreman shouts at John to hurry up and he increases his pushing force to 50N. Calculate the wheelbarrow's acceleration. When the foreman shouts at John to hurry up and John increases his pushing force to 50N, the wheelbarrow's acceleration can be calculated as follows:
F = 50N and m = 20 kg. Now, the acceleration of the wheelbarrow can be calculated using the formula below;
F = m × a, Where, F is the force applied, m is the mass of the object and, a is the acceleration of the object.
Rearranging the formula, we have; a = F/m.
Substituting the values in the formula; a = 50/20a = 2.5 m/s².
Therefore, the wheelbarrow's acceleration is 2.5 m/s².
Learn more about force here ;
https://brainly.com/question/30507236
#SPJ11
efer to Table 17-21. If John chooses Turn, what will Paul choose to do and what will Paul's payoff equal? a. Turn, 10 b. Drive Straight, 20 c. Tum, 5 d. Drive Straight,
According to the payoff matrix in Table 17-21, if John chooses to turn, Paul's best response would be to drive straight to get a payoff of 20, as it is greater than the payoff of 10 he would get if he also chose to turn. Therefore, the answer would be option (b) Drive Straight, 20.
This scenario illustrates the concept of Nash equilibrium in game theory, where each player chooses their best response given the other player's action. In this case, if John chooses to turn, Paul's best response is to drive straight, and vice versa. This results in a Nash equilibrium where neither player can improve their payoff by unilaterally changing their strategy.
It is important to note that the Nash equilibrium may not always result in the most desirable outcome for both players, as it only ensures that neither player has an incentive to deviate from their current strategy. In this case, both players may have been better off if they both chose to turn, resulting in a combined payoff of 15, which is greater than the combined payoff of 30 they get by both driving straight. However, without communication or a binding agreement between the players, the Nash equilibrium is the most likely outcome.
Learn more about Game Theory :
https://brainly.com/question/17515037
#SPJ11
points A large parallel-plate capacitor is being charged and the magnitude of the electric field between the plates of the capacitor is increasing at the rate 4. dt What is correct about the magnetic field B in the region between the plates of the charging capacitor? 1. Nothing about the field can be determined unless the charging current is known. 2. Its magnitude is inversely proportional to dt 3. It is parallel to the electric field. 4. Its magnitude is directly proportional to DE dt 5. Nothing about the field can be deter- mined unless the instantaneous electric field is known.
The correct statement about the magnetic field B is:
1. Nothing about the field can be determined unless the charging current is known.
The magnetic field in the region between the plates is influenced by the charging current, as described by Ampere's law. Without knowing the charging current, it's not possible to determine any specific information about the magnetic field B in this case.
To know more about magnetic field refer https://brainly.com/question/19878202
#SPJ11
what is the order of the differential equation that models the free vibrations of a spring-mass-damper system?
The order of the differential equation that models the free vibrations of a spring-mass-damper system is 2.
This is because the motion of the system can be described by Newton's second law of motion, which relates the force acting on an object to its acceleration.
In the case of a spring-mass-damper system, the force is the sum of the forces due to the spring, the mass, and the damper, and the acceleration is the second derivative of the position with respect to time.
Therefore, the resulting differential equation is a second-order differential equation.
To know more about equation refer here
https://brainly.com/question/10413253#
#SPJ11
A vertical, 1.24-m length of 18-gauge (diameter of 1.024 mm) copper wire has a 160.0-N ball hanging from it.
a. What is the wavelength of the third harmonic for this wire?
b. A 500.0 N ball now replaces the original ball. What is the change in the wavelength of the third harmonic caused by replacing the light ball with the heavy one?
a. The wavelength of the third harmonic for the wire can be calculated using the formula λ = 2L/n, where L is the length of the wire and n is the harmonic number. Substituting the values, the wavelength is 0.414 m.
b. Replacing the light ball with the heavy one increases the tension in the wire. The change in wavelength can be calculated using the formula Δλ = λ × ΔT/T, where ΔT is the change in tension and T is the initial tension. However, the diameter and length of the wire remain the same, so there is no change in the wavelength of the third harmonic.
a. The third harmonic corresponds to n = 3. Using the formula λ = 2L/n, we can calculate the wavelength as follows: λ = 2(1.24 m) / 3 = 0.414 m
b. The change in wavelength is determined by the change in tension. However, the diameter and length of the wire remain the same, so they do not affect the wavelength. As a result, the change in the tension caused by replacing the ball does not alter the wavelength of the third harmonic. Therefore, there is no change in the wavelength of the third harmonic.
learn more about wavelength here:
https://brainly.com/question/32056330
#SPJ11
what is the rotational kinetic energy of the earth? assume the earth is a uniform sphere. data for the earth can be found inside the back cover of the book. express your answer with the appropriate units.
The rotational kinetic energy of the earth is approximately 2.14 x 10^29 joules.
The rotational kinetic energy of the earth can be calculated using the formula:
KE = (1/2) I w^2
Where KE is the kinetic energy, I is the moment of inertia, and w is the angular velocity.
Assuming the earth is a uniform sphere, the moment of inertia can be calculated using the formula:
I = (2/5) m R^2
Where m is the mass of the earth and R is the radius.
According to the data inside the back cover of the book, the mass of the earth is approximately 5.97 x 10^24 kg and the radius is approximately 6.37 x 10^6 m.
Therefore,
I = (2/5) (5.97 x 10^24 kg) (6.37 x 10^6 m)^2
I = 9.98 x 10^37 kg m^2
The angular velocity of the earth can be calculated as the circumference of the earth divided by the length of a day:
w = (2 pi R) / T
Where T is the length of a day, which is approximately 24 hours or 86,400 seconds.
Therefore,
w = (2 pi) (6.37 x 10^6 m) / (86,400 s)
w = 7.29 x 10^-5 rad/s
Now we can calculate the rotational kinetic energy:
KE = (1/2) I w^2
KE = (1/2) (9.98 x 10^37 kg m^2) (7.29 x 10^-5 rad/s)^2
KE = 2.14 x 10^29 J
Learn more about kinetic energy here:-
https://brainly.com/question/999862
#SPJ11
A liquid that can be modeled as water of mass 0.25kg is heat to 80 degrees Celsius. The liquid is poured over ice of mass 0.070kg at 0 degrees Celsius. What is the temperature at thermal equilibrium, assuming no energy loss to the environment? How much energy must be removed from 0.085kg of steam at 120 degrees Celsius to form liquid water at 80 degrees Celsius?
Temperature at equilibrium is 0 degrees Celsius. Energy needed to remove from steam is 36.89 kJ.
1. At thermal equilibrium, the temperature of the liquid and ice mixture will be 0 degrees Celsius. To find the amount of energy required to reach thermal equilibrium, we use the equation:
Q = m * c * deltaT,
where
Q is the heat transferred,
m is the mass,
c is the specific heat capacity, and
deltaT is the change in temperature.
The heat transferred from the hot liquid to the ice is equal to the heat required to melt the ice and then raise its temperature to 0 degrees Celsius. Using this equation, we find that:
Q = 117.5 J.
2. To find the amount of energy that needs to be removed from the steam to form liquid water at 80 degrees Celsius, we use the equation:
Q = mL,
where
Q is the heat transferred,
m is the mass, and
L is the latent heat of vaporization.
First, we need to find the mass of the steam that needs to be condensed. We know that the total mass of the system is 0.085kg, so the mass of the steam can be found by subtracting the mass of the liquid water at 80 degrees Celsius from the total mass.
Using this equation, we find that the mass of the steam is 0.075kg. The latent heat of vaporization for water is 2.26 x [tex]10^6[/tex] J/kg.
Plugging in the values, we find that:
Q = 36.89 kJ.
For more such questions on Energy, click on:
https://brainly.com/question/13881533
#SPJ11
1a. The temperature at thermal equilibrium after pouring water (mass = 0.25 kg) at 80°C over ice (mass = 0.070 kg) at 0°C is approximately 0°C.
Determine the final temperature?To find the final temperature at thermal equilibrium, we can apply the principle of conservation of energy. The heat lost by the water as it cools down will be equal to the heat gained by the ice as it melts.
The heat lost by the water can be calculated using the formula: Q₁ = m₁c₁ΔT₁, where m₁ is the mass of water, c₁ is the specific heat capacity of water, and ΔT₁ is the change in temperature.
The heat gained by the ice can be calculated using the formula: Q₂ = m₂L, where m₂ is the mass of ice and L is the latent heat of fusion.
At thermal equilibrium, Q₁ = Q₂. Therefore, m₁c₁ΔT₁ = m₂L.
Rearranging the equation, we have ΔT₁ = (m₂L) / (m₁c₁).
Substituting the given values, ΔT₁ = (0.070 kg * 334,000 J/kg) / (0.25 kg * 4,186 J/(kg·°C)) = 0.56 °C.
Since the initial temperature of the ice is 0°C, the final temperature at thermal equilibrium is approximately 0°C.
Note: The specific heat capacity of water (c₁) is 4,186 J/(kg·°C), and the latent heat of fusion (L) for ice is 334,000 J/kg.
1b. The amount of energy that must be removed from 0.085 kg of steam at 120°C to form liquid water at 80°C is approximately 244,400 J.
To find the energy?To determine the energy that needs to be removed, we can calculate the heat lost by the steam as it cools down from 120°C to 80°C.
The heat lost by the steam can be calculated using the formula: Q = mcΔT, where m is the mass of steam, c is the specific heat capacity of steam, and ΔT is the change in temperature.
The specific heat capacity of steam (c) is approximately 2,010 J/(kg·°C).
Substituting the given values, Q = (0.085 kg * 2,010 J/(kg·°C)) * (120°C - 80°C) = 8,535 J/°C * 40°C = 341,400 J.
Therefore, the amount of energy that must be removed from 0.085 kg of steam at 120°C to form liquid water at 80°C is approximately 244,400 J.
Note: The specific heat capacity of steam (c) is approximate and may vary slightly with temperature.
To know more about energy, refer here:
https://brainly.com/question/8630757#
#SPJ4
Complete question here:
1a. A liquid that can be modeled as water of mass 0.25kg is heated to 80 degrees celsius. The liquid is poured over ice of mass 0.070kg at 0 (zero) degrees celsius. What is the temperature at thermal equilibrium, assuming no energy loss to the environment?
1b. how much energy must be removed from 0.085kg of steam at 120 degrees celsius to form liquid water at 80 degrees celsius?
answer the following questions that pertain to the basics of infrared spectroscopy: what is generally considered to be the frequency range (in cm or wavenumbers) of infrared radiation?
The frequency range of infrared radiation is generally considered to be 4000 to 400 [tex]cm^{-1[/tex]or wavenumbers.
Infrared radiation has a frequency range of approximately [tex]10^{13[/tex] to [tex]10^{14[/tex]Hz, or 4000 to 400 [tex]cm^{-1[/tex](wavenumbers). This range corresponds to the vibrational energies of molecules, which are affected by the masses of their atoms and the strengths of their chemical bonds. Infrared spectroscopy is a widely used analytical technique that involves passing infrared radiation through a sample and measuring the absorption or transmission of light at different wavelengths.
The resulting spectrum can provide information about the functional groups and chemical bonds present in the sample, allowing for identification and quantification of compounds. Infrared spectroscopy is used in a variety of fields, including chemistry, biochemistry, and materials science.
Learn more about Infrared radiation here:
https://brainly.com/question/20779091
#SPJ11
to what temperature will 7300 j of heat raise 3.5 kg of water that is initially at 12.0 ∘c ? the specific heat of water is 4186 j/kg⋅c∘ .
The final temperature after adding 7300 J of heat to 3.5 kg of water is approximately 12.5 °C.
To calculate the temperature to which 7300 j of heat will raise 3.5 kg of water that is initially at 12.0 ∘c, we can use the formula:
Q = m * c * ΔT
Where Q is the amount of heat transferred, m is the mass of the substance being heated (in kilograms), c is the specific heat capacity of the substance (in joules per kilogram per degree Celsius), and ΔT is the change in temperature (in degrees Celsius).
We know that:
- Q = 7300 j
- m = 3.5 kg
- c = 4186 j/kg⋅c∘
- The initial temperature (T1) is 12.0 ∘c.
We can rearrange the formula to solve for ΔT:
ΔT = Q / (m * c)
Plugging in the values, we get:
ΔT = 7300 j / (3.5 kg * 4186 j/kg⋅c∘)
ΔT = 0.496 ∘c
So, 7300 j of heat will raise 3.5 kg of water from 12.0 ∘c to 12.496 ∘c.
More on temperature: https://brainly.com/question/20276134
#SPJ11
if the true power is 100 w and the reactive power is 100 var, the apparent power is
The apparent power is 141.42 VA.
The formula to calculate the apparent power (S) is:
S = √(P^2 + Q^2)
where P is the real power in watts, and Q is the reactive power in volt-amperes reactive (VAR).
Given that the true power (P) is 100 watts and the reactive power (Q) is 100 VAR, we can substitute these values into the formula and get:
S = √(100^2 + 100^2) = √(10000 + 10000) = √20000 = 141.42 VA (volt-amperes)
Therefore, the apparent power is 141.42 VA.
Click the below link, to learn more about Apparent Power:
https://brainly.com/question/30904169
#SPJ11
8.4 air at 200 °f flows at standard atmospheric pressure in a pipe at a rate of 0.08 lb/s. determine the minimum diameter allowed if the flow is to be laminar..
The minimum diameter allowed for laminar flow of air is approximately 0.0674 ft or 0.809 inches.
To determine the minimum diameter allowed for laminar flow of air at 200°F and standard atmospheric pressure in a pipe with a flow rate of 0.08 lb/s, we can use the Reynolds Number equation.
Reynolds Number (Re) is a dimensionless number that represents the ratio of inertial forces to viscous forces in a fluid flow.
For laminar flow, the Re value should be less than 2300. The formula to calculate Reynolds Number is:
Re = (density x velocity x diameter) / viscosity.
Given the values, density of air at standard conditions is 0.0765 lb/ft³, viscosity is 1.05 x 10⁻⁵ lb-s/ft², velocity is 0.08 lb/s divided by the cross-sectional area of the pipe (π/4 x diameter²), and diameter is the unknown variable.
Solving for diameter using the Reynolds Number equation, we get the minimum diameter allowed for laminar flow of air is approximately 0.0674 ft or 0.809 inches.
Learn more about Reynolds number at
https://brainly.com/question/13218447
#SPJ11
A thin metal plate is shaped like a semicircle of radius 6 in the right half-plane, centered at the origin. The area density of the metal only depends on x, and is given by rho(x)=1. 7+2. 2x kg/m2. Find the total mass of the plate
The total mass will be ∫[-6,6] (1.7 + 2.2x) sqrt[tex](36 - x^2)[/tex] dx.
To determine the total mass of the plate we must integrate the areal density over the surface area of the entire plate.
The equation of the semicircle can be written as [tex]x^2 + y^2 = 6^2,[/tex] or y = sqrt[tex](36 - x^2).[/tex]
The formula for the circumference of a semicircle can be used to determine the surface area, and this can be integrated along the x-axis as follows:
C = πr = π(6) = 6π
We integral for the total mass:
M = ∫[a,b] ρ(x) dA
where
ρ(x) is the area density given by ρ(x) = 1.7 + 2.2x and dA which is an infinitesimal area element.
The x-values of -6 and 6 at which the semicircle approaches the x-axis serve as the limits of integration [a, b].
M = ∫[-6,6] (1.7 + 2.2x) dA
The derivative of y with respect to x, multiplied by an infinitesimal width dx, can now be used to express dA:
dA = y dx = sqrt(36 - x^2) dx
So, M = ∫[-6,6] (1.7 + 2.2x) sqrt[tex](36 - x^2)[/tex] dx
Therefore, the total mass will be ∫[-6,6] (1.7 + 2.2x) sqrt[tex](36 - x^2)[/tex] dx
Learn more about total mass, here:
https://brainly.com/question/32184743
#SPJ12
a mineral originally contained 1,000 radioactive parents. after two half-lives have passed the mineral will contain parent atoms and daughter atoms. enter in the correct numerical values.
Answer:
N = N0 / 4
After 2 half-lives 1/4 of the original N0 will be present
250 - number of parent atoms left
750 - number of daughter atoms present
An instrument weighing 5 lb is mounted on the housing of a pump that rotates at 30 rpm. The amplitude of motion of the housing is 0.003 ft.
Given that an instrument weighing 5 lb is mounted on the housing of a pump that rotates at 30 rpm, and the amplitude of motion of the housing is 0.003 ft, we can analyze the situation as follows:
1. The instrument weighs 5 lb.
2. The pump housing, where the instrument is mounted, rotates at a speed of 30 revolutions per minute (rpm).
3. The amplitude of the motion of the housing is 0.003 ft, meaning that the housing moves up and down with a maximum displacement of 0.003 ft from its equilibrium position during each rotation.
From this information, we can understand that the instrument experiences a periodic motion due to the rotating pump housing, and the amplitude of this motion is 0.003 ft.
To know more about Amplitude visit: https://brainly.com/question/8662436
#SPJ11
Suppose a spaceship heading straight towards the Earth at 0.85c can shoot a canister at 0.25c relative to the ship. If the canister is shot directly at Earth, what is the ratio of its velocity, as measured on Earth, to the speed of light? What about if it is shot directly away from the Earth (again, relative to c)?
A spaceship heading straight towards the Earth at 0.85c can shoot a canister at 0.25c relative to the ship. If the canister is shot directly at Earth, the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931. If it is shot directly away from the Earth then the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
We can use the relativistic velocity addition formula to calculate the velocity of the canister relative to the Earth in both cases
If the canister is shot directly at Earth
Let vship = 0.85c be the velocity of the spaceship relative to Earth, and vcanister = 0.25c be the velocity of the canister relative to the spaceship. Then, the velocity of the canister relative to Earth is
vearth = (vship + vcanister) / (1 + vship*vcanister/[tex]c^{2}[/tex])
Plugging in the values gives
vearth = (0.85c + 0.25c) / (1 + 0.85c*0.25c/[tex]c^{2}[/tex]) = 0.931c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931.
If the canister is shot directly away from Earth
In this case, the relative velocity between the spaceship and the canister is vcanister' = -0.25c (note the negative sign), since the canister is moving in the opposite direction. The velocity of the canister relative to Earth is then
vearth' = (vship + vcanister') / (1 - vship*vcanister'/[tex]c^{2}[/tex])
Plugging in the values gives
vearth' = (0.85c - 0.25c) / (1 - 0.85c*(-0.25c)/[tex]c^{2}[/tex]) = 0.387c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
To know more about velocity here
https://brainly.com/question/31325078
#SPJ4
A 0. 05-kg car starts from rest at a height of 0. 95 m. Assuming no friction, what is the kinetic energy of the car when it reaches the bottom of the hill? (Assume g = 9. 81 m/s2. ).
The kinetic energy of the car when it reaches the bottom of the hill is 4.6 J. According to the conservation of energy, the potential energy at the top is converted into kinetic energy at the bottom.
The potential energy of the car at the top of the hill is given by mgh, where m is the mass (0.05 kg), g is the acceleration due to gravity (9.81 m/s^2), and h is the height (0.95 m). Therefore, the potential energy at the top is (0.05 kg) * (9.81 m/s^2) * (0.95 m) = 0.461 J.
According to the conservation of energy, the potential energy at the top is converted into kinetic energy at the bottom. Therefore, the kinetic energy of the car at the bottom is equal to the potential energy at the top. Hence, the kinetic energy at the bottom is 0.461 J, which is approximately 4.6 J.
learn more about energy here:
https://brainly.com/question/30878026
#SPJ11
You are investigating the safety of a playground slide. You are interested in finding out what the maximum speed will be of children sliding on it when the conditions make it very slippery (assume frictionless). The height of the slide is 2.5 m. What is that maximum speed of a child if she starts from rest at the top?
The maximum speed of a child sliding down a 2.5 m high frictionless slide starting from rest at the top is 7.0 m/s (rounded to one decimal place) according to the conservation of energy principle.
The potential energy of the child at the top of the slide can be converted into kinetic energy as she slides down. By the conservation of energy principle, the sum of the potential and kinetic energy is constant. At the top of the slide, the child has only potential energy, which is equal to mgh, where m is the mass of the child, g is the acceleration due to gravity (9.8 m/s²), and h is the height of the slide (2.5 m). At the bottom of the slide, the child has only kinetic energy, which is equal to (1/2)mv², where v is the speed of the child. By conservation of energy, mgh = (1/2)mv², which can be rearranged to v = sqrt(2gh). Plugging in the given values, we get v = sqrt(2 x 9.8 m/s² x 2.5 m) = 7.0 m/s (rounded to one decimal place).
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
if the surface area of the earth is given by (4πr^2) and the radius of the earth is (6400km), calculate the surface area of the earth in (m^2)
The surface area of the earth with a radius of 6400 km is 5.14×10¹⁴ m².
What is surface area?The surface area of a solid object is a measure of the total area that the surface of the object occupies.
To calculate the surface area of the earth, we use teh formula below
Formula:
A = 4πr².............................. Equation 1Where:
A = Surface area of the earthr = Radius of the earthFrom the question,
Given:
r = 6400 km = 6.4×10⁶ mπ = 3.14Substitute these values into equation 1
A = 3.14×(6.4×10⁶)²×4A = 5.14×10¹⁴ m²Learn more about surface area here: https://brainly.com/question/1297098
#SPJ1
the reservoirs in fig. p6.55 contain water at 20°c. if the pipe is smooth with l = 4500 m and d = 4 cm, what will the flow rate in m3/h be for ∆z = 100 m? neglect minor losses.
The flow rate in m³/h for a smooth pipe with a length of l = 4500 m, diameter of d = 4 cm, and a vertical height difference of ∆z = 100 m, given that the reservoirs contain water at 20°C, is approximately 0.073 m³/h.
To calculate the flow rate, we can use the Bernoulli equation, which relates pressure, velocity, and height at two different points in a fluid flow system. Neglecting minor losses, the Bernoulli equation for the two reservoirs can be written as:
P₁/ρ + v₁²/2g + z₁ = P₂/ρ + v₂²/2g + z₂
where P is pressure, ρ is density, v is velocity, g is the acceleration due to gravity, and z is height. At both reservoirs, the pressure is atmospheric, and the velocity is zero, so the equation simplifies to:
z₁ + v₂²/2g = z₂
we can solve for the velocity v₂ using the equation:
v₂ = √(2g(∆z))
where ∆z is the height difference between the two reservoirs. Substituting the given values, we get:
v₂ = √(2 × 9.81 m/s² × 100 m) = 44.29 m/s
Next, we can use the continuity equation, which states that the mass flow rate is constant at every point in a fluid flow system. The equation can be written as:
Q = Av = πd²/4 × v
where Q is the volumetric flow rate, A is the cross-sectional area of the pipe, and d is the diameter of the pipe. Substituting the given values, we get:
Q = π(4 cm)²/4 × 44.29 m/s × 3.6 × 10⁻³ = 0.073 m³/h.
learn more about Bernoulli equation here:
https://brainly.com/question/31047017
#SPJ11
A point source emits sound waves with a power output of 100 watts.What is the sound level (in dB) at a distance of 10 m?
Question 8 answers
a. 139
b. 119
c. 129
d. 109
e. 10
The sound level at a distance of 10 meters from a point source emitting sound waves with a power output of 100 watts is 119 dB. The correct answer is option (b).
To find the sound level (in dB) at a distance of 10 meters, we can use the formula:
Sound Level (dB) = 10 * log10 (I/I₀)
Where I is the intensity of the sound, I₀ is the reference intensity (10⁻¹² W/m²), and log10 is the base-10 logarithm. First, we need to calculate the intensity (I) using the formula:
I = Power / (4 * π * r²)
Where Power is the power output (100 watts) and r is the distance from the point source (10 meters).
I = 100 / (4 * π * 10²) = 0.0796 W/m²
Now, we can calculate the sound level:
Sound Level (dB) = 10 * log10 (0.0796 / 10⁻¹²) ≈ 119 dB
Thus, the sound level at 10 meters is 119 dB.
Learn more about sound waves here:
https://brainly.com/question/31851162
#SPJ11