Answer:
a. EU:
materials = 29,400 + 7,280 = 36,680
conversion = 29,400 + 5,200 = 34,600
b. cost per EU:
materials = $75,194 / 36,680 = $2.05
conversion = $36,330 / 34,600 = $1.05
c. units started and completed during April = 23,700
d. no, he didn't do anything, When a company uses the weighted average process costing method, the cost of beginning WIP is used to determine the cost per equivalent unit. On the other hand, FIFO process costing method doesn't, it only considers costs incurred during the month to calculate cost per equivalent unit.
Explanation:
beginning WIP 5,700 $15,276
materials, $10,545
conversion cost, $4,731
units started 34,100
costs added during the month = $96,248
materials, $64,649
conversion cost, $31,599
units transferred out 29,400 $91,140
ending WIP 10,400 $20,384
materials 70% = 7,280 EU
conversion 50% = 5,200 EU
EU:
materials = 29,400 + 7,280 = 36,680
conversion = 29,400 + 5,200 = 34,600
total cost for materials = $64,649 + $10,545 = $75,194
total cost for conversion = $31,599 + $4,731 = $36,330
cost per EU:
materials = $75,194 / 36,680 = $2.05
conversion = $36,330 / 34,600 = $1.05
units started and completed during April = 29,400 - 5,700 = 23,700
A company has the following ratios:
Current ratio: 2.1 to 1.0
Accounts receivable turnover ratio. 350 to 1 Debt/ equity ratio. 20.0 to 1 Interest coverage ratio 7.0 to 1 Inventory turnover ratio 9.0 to 1 The industry averages are: A company has the following ratios: Current ratio: 4.1 to 1.0 Accounts receivable turnover ratio. 8 to 1 Debt/ equity ratio. 4.0 to 1 Interest coverage ratio 9.0 to 1 Inventory turnover ratio 8.0 to 1. Based on the above items, please compare and contrast the ratios between the company and the industry.
Required:
Analyze reasons why there could be differences and the overall financial position of the company. Also, what of the ways the company could finance the company without significant negative changes to the above financial metrics (ratios)?
Answer:
The company has current ratio almost half than the industry average. This is an indication that the company has lesser current assets than industry average. The ability of the company to meet its short term obligations is not suitable as the other companies in the industry are maintaining double current ratio. The ratio should never go below 1 as if it does the company may face its operational financing and working capital management issues.
The debt to equity ratio is significantly higher than the other companies of the same industry. The industry average is 4 whereas the company has ratio 20. This is significantly higher which indicates that there is heavy burden of debt on the company. High debt/ equity ratio indicates high risks. Investors avoid investing in such companies which have high debt/ equity ratio.
Explanation:
The company can go for equity financing as it will also help reduce its debt / equity ratio. The company will become less riskier and financing will be divided in debt and equity. The debt burden on assets will be reduced. There can be reduction in certain debt covenants. The company can use equity financing to fund its operations as well as purchase of non current assets to increase production and ultimately profitability of the company could rise.
The Aleutian Company uses departmental overhead rates. The Fabrication Department uses machine hours for an allocation base, and the Assembly Department uses labor hours. What is the Assembly Department overhead rate per labor hour
Answer:
$4.425 per labor hour
Explanation:
Note: The full question has been attached as picture
Product Rings Labor Hours = 1030 units x 4 labor hours per unit
Product Rings Labor Hours = 4,120 hours
Product Dings Labor Hours = 1810 units x 7 Labor hour per unit
Product Dings Labor Hours = 12,670 hours
Hence, the total Labor Hours = 4,120 hours + 12,670 hours = 16,790 hours
The total Assembly Department Overhead is estimated to be $74,300. Hence, the Assembly Department Overhead rate per labor hour = Total Overhead / Total Labor Hours
Assembly Department Overhead rate = $74,300 / 16,790
Assembly Department Overhead rate = $4.425
Bristo Corporation has sales of 1,750 units at $40 per unit. Variable expenses are 30% of the selling price. If total fixed expenses are $39,000, the degree of operating leverage is:
Answer:
1,750=$40=1,750×40=70-30÷100×39,000=58,3
Explanation:
is total cost of production can be fixed cost +variable cost
Answer:
degree of operating leverage= 4.9
Explanation:
To calculate the degree of operating leverage, we need to use the following formula:
degree of operating leverage= Total contribution margin / operating income
Total Contribution margin= 1,750*(40*0.7)= $49,000
Operating income= 49,000 - 39,000= $10,000
degree of operating leverage= 49,000/10,000
degree of operating leverage= 4.9
Major League Bat Company manufactures baseball bats. In addition to its goods in process inventories, the company maintains inventories of raw materials and finished goods. It uses raw materials as direct materials in production and as indirect materials. Its factory payroll costs include direct labor for production and indirect labor. All materials are added at the beginning of the process, and direct labor and factory overhead are applied uniformly throughout the production process.Required:You are to maintain records and produce measures of inventories to reflect the July events of this company. The June 30 balances are as follows: Raw Materials Inventory, $25,000; Goods in Process Inventory, $10,520 ($2,800 of direct materials, $3,800 of direct labor, and $3,920 of overhead); Finished Goods Inventory, $116,000; Sales, $0; Cost of Goods Sold, $0; Factory Payroll, $0; and Factory Overhead, $0.1. Prepare journal entries to record the following July transactions and events.a. Purchased raw materials for $132,000 cash (the company uses a perpetual inventory system).b. Used raw materials as follows: direct materials, $49,900; and indirect materials, $15,000.c. Incurred factory payroll cost of $173,650 paid in cash (ignore taxes).d. Assigned factory payroll costs as follows: direct labor, $142,650; and indirect labor, $31,000.e. Incurred additional factory overhead costs of $42,795 paid in cash.f. Allocated factory overhead to production at 50% of direct labor costs.2. Information about the July inventories follows. Use this information with that from part 1 to prepare a process cost summary, assuming the weighted-average method is used. (Round "Cost per EUP" to 2 decimal places.)3. Using the results from part 2 and the available information, make computations and prepare journal entries to record the following:g. Total costs transferred to finished goods for July.h. Sale of finished goods costing $132,010 for $650,000 in cash.4. Post entries from parts 1 and 3 to the following general ledger accounts5. Compute the amount of gross profit from the sales in July. (Add any underapplied overhead too, or deduct any overapplied overhead from, the cost of goods sold.)
Question Completion:
Information about the July inventories follows:
Beginning inventory 8,000 units
Started 17,000 units
Ending inventory 11,000 units
Beginning inventory
Materials—Percent complete 100%
Conversion—Percent complete 80%
Ending inventory
Materials—Percent complete 100%
Conversion—Percent complete 30%
Answer:
Major League Bat Company
1. Journal Entries:
a. Debit Raw Materials Inventory $132,000
Credit Cash Account $132,000
To record the purchase of raw materials.
b. Debit Work in Process $49,900
Debit Manufacturing Overhead $15,000
Credit Raw Materials $64,900
To record materials used.
c. Debit Factory Wages $173,650
Credit Cash Account $173,650
To record factory payroll incurred.
d. Debit Work in Process $142,650
Debit Manufacturing Overhead $31,000
Credit Factory Wages $173,650
To assign factory payroll costs.
e. Debit Manufacturing Overhead $42,795
Credit Cash Account $42,795
To record additional factory overhead costs.
f. Debit Work In Process $71,325
Credit Manufacturing Overhead $71,325
To allocate factory overhead to production at 50% of direct labor costs.
2. Computation of Equivalent Units of Production:
Materials Conversion Total
Beginning inventory 8,000 units 8,000 6,400
Started 17,000 units 17,000 17,000
Ending inventory 11,000 units 11,000 3,300
Total equivalent unit 28,000 20,300
3. Costs of Production:
Beginning Inventory $2,800 $7,720
Raw materials 49,900 213,975
Total costs $52,700 $221,695
Total equivalent unit 28,000 20,300
Cost per equivalent unit $1.88 $10.92
Total costs:
Started 17,000 $31,960 17,000 $185,640 $217,600
Ending inventory 11,000 20,680 3,300 36,036 $56,716
4. Journal Entries:
Debit Finished Goods Inventory $217,600
Credit Work In Process $217,600
To record the transfer of goods.
Debit Cost of Goods Sold $132,010
Credit Finished Goods Inventory $132,010
To record the cost of goods sold.
Debit Cash Account $650,000
Credit Sales Revenue $650,000
To record the sale of goods for cash.
5. Ledger accounts:
Raw Materials Inventory
Accounts Titles Debit Credit
Balance $25,000
Cash Account 132,000
Work in Process $49,900
Manufacturing Overhead 15,000
Work In Process
Accounts Titles Debit Credit
Balance $10,250
Raw materials 49,900
Factory Wages 142,650
Manufacturing
Overhead 71,325
Finished Goods Inventory $217,600
Balance 56,716
Manufacturing Overhead
Accounts Titles Debit Credit
Raw materials $15,000
Factory wages 31,000
Other overheads 42,795
Work in Process applied $71,325
Underapplied overhead 17,470
6. Income Statement:
For July
Sales Revenue $650,000
Cost of goods sold 132,010
Underapplied overhead 17,470 $149,480
Gross profit $500,520
Explanation:
a) Data and Calculations:
June 30 Balances:
Raw Materials Inventory, $25,000;
Goods in Process Inventory, $10,520 ($2,800 of direct materials, $3,800 of direct labor, and $3,920 of overhead);
Finished Goods Inventory, $116,000;
Sales, $0;
Cost of Goods Sold, $0;
Factory Payroll, $0; and
Factory Overhead, $0.1.
One of the disadvantages of the sole proprietorship is related to the fact that the amount of equity capital that can be raised to finance the business is limited to the owner's personal wealth. ____________ is about determining how the firm should finance or pay for assets. The risk manager monitors and manages the firm's risk exposure in financial and commodity markets and the firm's relationships with insurance providers. Privately held, or closely held, corporations are typically owned by a small number of investors, and their shares are not traded publicly.
Answer:
The missing word is: Financial Risk
Explanation:
To begin with, the name of "Financial Risk" is used in the field of business and finances in order to explain that the companies, and also the government, have to find a way to determine how the firm will finance itself so that they could pay for all the assets they own. Moreover, this financial term implicates the loss of the money that can happen when the company needs to invest in assets and the operations may not go right. So that is why that it is a concept used to understand the danger that the organization has when it comes to acquire the assets and pay for them.
Some characteristics of the determinants of nominal interest rates are listed as follows. Identify the components (determinants) and the symbols associated with each characteristic:
a. This is the rate for a riskless security that is exposed to changes in inflation.
b. Over the past several years, Germany, Japan, and Switzerland have had lower interest rates than the United States due to lower values of this premium.
c. This is the premium that reflects the risk associated with changes in interest rates for a long-term security.
d. This is the rate for a short-term riskless security when inflation is expected to be zero.
e. This premium is added when a security lacks marketability, because it cannot be bought and sold quickly without losing value.
f. This is the premium added as a compensation for the risk that an investor will not get paid in full.
Answer:
a. This is the rate for a risk less security that is exposed to changes in inflation.
Component: Nominal risk free rate
Symbol: rRF
b. Over the past several years, Germany, Japan, and Switzerland have had lower interest rates than the United States due to lower values of this premium.
Component: Inflation premium
Symbol: IP
c. This is the premium that reflects the risk associated with changes in interest rates for a long-term security.
Component: Maturity risk premium
Symbol: MRP
d. This is the rate for a short-term risk less security when inflation is expected to be zero.
Component: Real risk free rate
Symbol: r*
e. This premium is added when a security lacks marketability, because it cannot be bought and sold quickly without losing value.
Component: Liquidity risk premium
Symbol: LRP
f. This is the premium added as a compensation for the risk that an investor will not get paid in full.
Component: Default risk premium
Symbol: DRP
Assume that Ray is 38 years old and has 27 years for saving until he retires. He expects an APR of 7.5% on his investments. How much does he need to save if he puts money away annually in equal end-of-the-year amounts to achieve a future value of $1,200,000 dollars in 27 years' time
Answer:
Annual deposit= $14,882.44
Explanation:
Giving the following information:
Future Value= $1,200,000
Number of periods= 27 years
Interest rate= 7.5%
To calculate the annual deposit, we need to use the following formula:
FV= {A*[(1+i)^n-1]}/i
A= annual deposit
Isolating A:
A= (FV*i)/{[(1+i)^n]-1}
A= (1,200,000*0.075) / [(1.075^27) - 1]
A= $14,882.44
At the local banking institution the branch manager doubles as the IT "go-to" by handling printer setups, resettingLAN passwords, and periodically monitoring the branch’s server health. Last week she noted that a handful of herbranch’s customers complained about suspicious activity in their checking accounts. She knew that the main branchwould handle it and repair any fraudulent charges. She also knew better than to bother the main branch with these customer complaints because the main branch is always ahead of things like this and quickly reminds her that they seewhat she does. Her only response, therefore, was to assure her customers that their accounts would be repaired withinten business days.The most likely law or regulation that becomes an issue upon her discovery i:__________.
a. The Gramm-Leach-Bliley Act’s Safeguards Rule
b. The Good Samaritan Law
c. Section 404 of the Sarbanes-Oxley Act
d. The FTC’s Red Flags Rule
Answer: d. The FTC’s Red Flags Rule
Explanation:
The Federal Trade Commission has a Red Flags Rules that requires that financial institutions like Banks should implement a program that is capable of flagging instances of suspicious activity that could point to identity theft in the covered accounts that it holds.
This bank's customers are seeing some suspicious activity in their checking accounts which could point to a case of identity theft. The Red Flags rule could therefore be the most relevant rule to the manager's discovery.
Rachel pushed very hard to go with Project A rather than Project B. There have been several cost overruns, the project is two weeks beyond its projected finish date, and the technology just isn't working out as planned. Rachel increases the funding for the third time and hires three new designers to help revamp the look of the product. Rachel is engaging in _____.
Answer: escalation of commitment
Explanation:
Escalation of commitment is when an individual or firm chooses an option which tends to be unsuccessful but the individual or firm still continues with the project because there has been investment which has already been made on it.
From the question, we are told that Rachel pushed very hard to go with Project A rather than Project B. From the information given, despite the fact that project A has been unsuccessful, Rachel continued with it and invested more in it rather than changing or leaving it for project B. This shows that Rachel is engaging in escalation of commitment.
Randy likes baseball more than football, football more than basketball, and basketball more than baseball. Which assumption about consumer preferences does this violate
Answer:
transitivity
Explanation:
As it is given that
Baseball > football
football > basketball
Basketball > baseball
Based on the above information
The consumer preference of transitivity is violated as the transitivity refers to a process in which the preference of the one good is given over another good
So in the given situation, the third option is correct and the same is to be considered
A Corporation has two divisions: the South Division and the West Division. The corporation's net operating income is $26,900. The South Division's divisional segment margin is $42,800 and the West Division's divisional segment margin is $29,900. What is the amount of the common fixed expense not traceable to the individual divisions
Answer:
$45,800
Explanation:
Common fixed expense not traceable to the individual divisions = South division's divisional segment margin + west division's divisional segment - corporation's net operating income
Common fixed expense not traceable to the individual divisions = $42,800 + $29,900 - $26,900
Common fixed expense not traceable to the individual divisions = $45,800
During the current year, the Town of Salo Alto recorded the following transactions related to its property taxes:
a. Levied property taxes of $3,300,000, of which 2 percent is estimated to be uncollectible.
b. Collected current property taxes amounting to $2,987,500.
c. Collected $26,500 in delinquent taxes and $2,400 in interest and penalties on the delinquent taxes.
d. These amounts had been recorded as Deferred Inflows of Resources in the prior year.
e. Imposed penalties and interest in the amount of $3,750 but only expects to collect $3,100 of that amount. None is expected to be collected this year or within 30 days of year-end.
f. Reclassified uncollected taxes as delinquent. These amounts are not expected to be collected within the first 60 days of the following fiscal year.
Required:
Prepare the journal entries.
Answer:
S/N Account Titles & Explanation Debit Credit
1) Taxes Receivable—Current $3,300,000
Estimated Uncollectible Current Taxes $66,000
Revenues $3,234,00
2) Cash $2,987,500
Tax Receivable-current $2,987,500
3) Cash $28,900
Tax Receivable- Delinquent $26,500
Interest and Penalties Receivable On Taxes $2,400
4) Penalties and Interest Receivable $3,750
Estimated Uncollectible Interest $650
and Penalties
Revenues $3,100
5) Taxes Receivable- Delinquent $312,500
($3300000-$2987500)
Estimated Uncollectible Current Taxes $66,000
Taxes Receivable- Current $312,500
Estimated Uncollectible Delinquent Taxes $66,000
The price of a stock is $55 at the beginning of the year and $50 at the end of the year. If the stock paid a $3 dividend and inflation was 3%, what is the real holding-period return for the year? -3.64% -6.36% -6.44% -11.74%
Answer:
Real holding period return = - 6.44% (Approx)
Explanation:
Holding period return = [Dividend + (Price of share ending - Price of share start)] / Price of share start
Holding period return = [3 + (50-55)] / 55
Holding period return = -2 / 55
Holding period return = -0.0363636
Real holding period return = [(1 + Holding period return)/(1 + Inflation)] - 1
Real holding period return = [(1 - 0.0363636)/(1+0.03)]-1
Real holding period return = - 0.06443
Real holding period return = - 6.44% (Approx)
Consider a simple example economy where there are two goods, coconuts and restaurant meals (coconut-based). There are two firms. A coconut producer collects and sells 10 million coconuts at $2.00 each. The firm pays $5 million in wages, $0.5 million in interest on an old loan, and $1.5 million in taxes to the government. We also know that 4 million coconuts are sold to the public for consumption, and 6 million coconuts are sold to the restaurant firm, which uses them to prepare meals. The restaurant sells $30 million in meals. The restaurant pays $4 million in wages and the government $3 million in taxes. The government supplies security and accounting services and employs only labor, and government workers are paid $5.5 million, collected in taxed by the government. Finally, consumers pay $1 million in taxes to the government in addition to the taxes paid by the two firms.
Required:
a. Compute GDP for this simple economy using the product approach.
b. Compute GDP for this simple economy using the expenditure approach.
c. Compute GDP for this simple economy using the income approach.
d. Now, suppose that the coconut producer cannot sell 1 million coconuts during the course of the year. These are collected coconuts that are not sold to the public (assume that sales to the other firm, the restaurant, remain the same).
e. How does this new piece of information affect your calculations in the expenditure approach? Explain.
A) Product Approach
GDP = Value added of all industries
Value added = revenue - intermediate costs
Value added coconut producer = $20,000,000 (it does not have intermediate costs)
Value added restaurant = $30,000,000 - $12,000,000 (cost of coconuts)
= $18,000,000
Value added government = $5,500,000 (collected in taxes, $3 million from the restaurant, $1.5 million from the coconut producer, and $1 million from consumers).
GDP = $20,000,000 + $18,000,000 + $5,500,000
= $43,000,000
B) Expenditure Approach
GDP = Consumption + Investment + Government Spending + Net Exports
Consumption = $8,000,000 in coconuts + $30,000,000 in meals
= $38,000,000
Investment = $0
Government Spending = $5,500,000 in government wages
Net Exports = $0 (it is a closed-economy)
GDP = $38,000,000 + $0 + $5,500,000 + $0
= $43,500,000
C) Income Approach
Wages = $14,500,000
Corporate Profits = $24,000,000
Interest income = $500,000
Taxes = $4,500,000
GDP = $43,500,000
e. How does this new piece of information affect your calculations in the expenditure approach? Explain.
GDP under the expenditure approach, would rise by the value of the unsold coconuts ($1 million) as long as the coconuts were harvested in the given year. This is because inventory produced in the given year, is part of that year's GDP.
CAM charges for retail leases in a shopping mall must be calculated. The retail mall consists of a total area of 2.8 million square feet, of which 800,000 square feet has been leased to anchor tenants that have agreed to pay $2 per rentable square foot in CAM charges. In-line tenants occupy 1.3 million square feet, and the remainder is a common area, which the landlord believeswill require $8 per square foot to maintain and operate each year. If the owner is to cover total CAM charges, how much will in-line tenants have to pay per square foot?
Answer:
$3.08 per square foot
Explanation:
Calculation for how much will in-line tenants have to pay per square foot
First step is to find the common area
Common area = 2,800,000−800,000−1,300,000 Common area= 700,000
Second step is to find Common area operating costs
Common area operating costs = 700,000×8
Common area operating costs= $5.6 million
Third step is to find the Operating costs charged to in-line tenants
Operating costs charged to in-line tenants = 5,600,000−800,000×2
Operating costs charged to in-line tenants = 4,000,000
Last step is to calculate the In-line CAM charges using this formula
In-line CAM charges=Operating costs charged to in-line tenants -In-line tenants square feet
Let plug in the formula
In-line CAM charges = 4,000,000 ÷ 1,300,000
In-line CAM charges= $3.08
Therefore the amount that in-line tenants have to pay per square foot will be $3.08 per square foot.
The CEO of Jaquar Consultancy Corp. informs Amy's supervisor that she has performed extremely well in her last project. Amy's supervisor sends an e-mail to the entire team about the good review received from the CEO. Jaquar is known for its regular performance-driven incentives that it awards to employees performing exceptionally well. This implies that Jaquar Consultancy Corp. operates by implementing:
a. internal marketing.
b. empathy marketing.
c.customer profiling.
d. benchmarking.
Answer: Internal marketing
Explanation:
Jaquar Consultancy Corp. operates by implementing internal marketing. Internal marketing is when the objectives, and products of a company are promoted within the particular company.
The purpose of Internal marketing is to increase workers engagement with the goals and objectives of f the company and help foster its brand. The needs of the workers are satisfied in order to attain company's goals.
1
TRUE FALSE Dermatology is the study of the skin, its structure, functions, diseases and
treatment
2. TRUE FALSE The skin is the 2nd largest organ of the body.
3. The functions of the skin include sensation, heat regulation, absorption, protection, excretion
and
4. The three main layers of the skin are the subcutaneous, epidermis and
The skin layer that has five layers of cells with differing characteristics is the
Sweat is produced by the gland known as the
6. The layer of skin that acts as a shock absorber to protect the bones is known as the
7. The American Academy of Dermatology recommends using a sunscreen with an SPF
of at least
Answer:
T
Explanation:
Because its true Heheheheheheehhehe sorryyyyyy
This activity is important because as world trade has grown, more companies have entered the global market. Once a firm decides to enter the global market, it must choose which means of market entry is the most appropriate. The global market entry strategies vary greatly on the dimensions of financial commitment, risk, marketing control, and profit potential.
The goal of this exercise is to demonstrate your understanding of the different types of global market entry strategies: exporting, licensing, joint venture, and direct investment. Roll over each company name to read the description of the firm's strategy, then drop it onto the correct global market entry strategy within the graphic.
1. Yoplait
2. Moodmatcher lipstick
3. McDonald's
4. Ericsson and CGCT
5. Boeing
6. Nissan
A. Indirect Exporting
B. Direct Exporting
C. Licensing
D. Franchising
E. Joint Venture
F. Direct Investment
Answer:
Throughout the clarification subsection below, the definition of the questionnaire provided is defined.
Explanation:
Indirect Exporting and Moodmatcher lipstickRationale: A organization like Moodmatcher lipstick manufactures the understood as a tool and promotes this through an intermediary throughout numerous governments or foreign.
Direct Exporting and BoeingRationale: A business including Boeing creates the goods domestically which exports anything without an intermediary throughout foreign nations.
Licensing and YoplaitRationale: In return for royalty as well as the fee, a business like Yoplait sells the rights to copyright, trademark, proprietary information, and perhaps other prized intellectual property.
Franchising and McDonald'sRationale: Companies including McDonald's are licensed to launch new franchises which are one of the quickest expanding methods for market entry.
Joint Venture Ericsson and CGCTRationale: The Swedish networking group Ericsson has entered into a joint venture partner CGCT, another French switching group.
Direct Investment and NissanRationale: A domestic company such as Nissan invests in some kind of an international subsidiary and retains it.
Despite its status as one of the richest countries in the world, Japan a. has a very low level of productivity. b. has few natural resources. c. has very little human capital. d. engages in a relatively small amount of international trade.
Answer:
b. has few natural resources.
Explanation:
Japan is one of the largest economies in the world, and even though it is a country with few natural resources, it managed to reach this level because it is a country whose main economic activities are focused on exports, according to production based on the Toyotist system, which is a on-demand manufacturing system, which reduces waste throughout the production process, which guarantees significant advantages. There is also a culture based on quality, innovation, education and technological development.
Japan's high population density constitutes a high human capital for work, which justifies the greater commercialization of goods and services. All of these factors justify how Japan became the world's third largest economy.
During the first month of operations ended August 31, Kodiak Fridgeration Company manufactured 80,000 mini refrigerators, of which 72,000 were sold. Operating data for the month are summarized as follows:
1 Sales $10,800,000.00
2 Manufacturing costs:
3 Direct materials $6,400,000.00
4 Direct labor 1,600,000.00
5 Variable manufacturing cost 1,280,000.00
6 Fixed manufacturing cost 320,000.00 9,600,000.00
7 Selling and administrative expenses:
8 Variable $1,080,000.00
9 Fixed 180,000.00 1,260,000.00
Required:
1. Prepare an income statement based on the absorption costing concept.*
2. Prepare an income statement based on the variable costing concept.*
3. Explain the reason for the difference in the amount of income from operations reported in (1) and (2).
* Refer to the lists of Labels and Amount Descriptions for the exact wording of the answer choices for text entries. Be sure to complete the statement heading. A colon (:) will automatically appear if required. Enter Inventory, August 31 as a negative number using a minus sign. If a net loss is incurred, enter that amount as a negative number using a minus sign.
Labels and Amount Descriptions
Labels
August 31
Cost of goods sold
Fixed costs
For the Month Ended August 31
Variable cost of goods sold
Amount Descriptions
Contribution margin
Contribution margin ratio
Cost of goods manufactured
Fixed manufacturing costs
Fixed selling and administrative expenses
Gross profit
Income from operations
Inventory, August 31
Loss from operations
Manufacturing margin
Planned contribution margin
Sales
Sales mix
Selling and administrative expenses
Total cost of goods sold
Total fixed costs
Total variable cost of goods sold
Variable cost of goods manufactured
Variable selling and administrative expenses
Absorption Costing Income Statement
Shaded cells have feedback.
1. Prepare an income statement based on the absorption costing concept. Refer to the lists of Labels and Amount Descriptions for the exact wording of the answer choices for text entries. Be sure to complete the statement heading. A colon (:) will automatically appear if required. Enter Inventory, August 31 as a negative number using a minus sign. If a net loss is incurred, enter that amount as a negative nmber using a minus sign.
Score: 64/64
Kodiak Fridgeration Company
Absorption Costing Income Statement
✔
1
✔
✔
2
✔
3
✔
✔
4
✔
✔
5
✔
✔
6
✔
✔
7
✔
✔
8
✔
Sales - (Cost of Goods Manufactured - Ending Inventory*) = Gross Profit; Gross Profit - Selling and Administrative Expenses = Income from Operations
* (Manufactured Units - Sold Units) x (Total Manufacturing Costs/Manufactured Units)
Variable Costing Income Statement
Shaded cells have feedback.
2. Prepare an income statement based on the variable costing concept. Refer to the lists of Labels and Amount Descriptions for the exact wording of the answer choices for text entries. Be sure to complete the statement heading. A colon (:) will automatically appear if rquired. Enter Inventory, August 31 as a negative number using a minus sign. If a net loss is incurred, enter that amount as a negative number using a minus sign.
Score: 23/106
Kodiak Fridgeration Company
Variable Costing Income Statement
✔
1
✔
✔
2
✔
3
✔
4
5
6
7
8
9
10
11
12
13
Sales - Variable Cost of Goods Sold* = Manufacturing Margin; Manufacturing Margin - Variable Selling and Administrative Expenses = Contribution Margin; Contribution Margin - (Fixed Manufacturing Costs + Fixed Selling and Administrative Expenses) = Income from Operations.
*Variable Cost of Goods Sold = Variable Cost of Goods Manufactured - [(Manufactured Units - Sold Units) x (Variable Manufacturing Costs/Manufactured Units)]
Final Question
Shaded cells have feedback.
3. Explain the reason for the difference in the amount of income from operations reported in (1) and (2).
The income from operations reported under absorption costing exceeds the income from operations reported under variable costing by the difference between the two, due to fixed manufacturing costs that are deferred to a future month under absorption costing.
Answer:
1. Income statement based on the absorption costing concept.*
Sales $10,800,000.00
Less Cost of Goods Sold
Beginning Inventory $0
Add Cost of Goods Manufactured $9,600,000.00
Less Ending Inventory ($960,000.00) ($8,640,000.00)
Gross Profit $2,160,000.00
Less Expenses :
Selling and administrative expenses:
Variable $1,080,000.00
Fixed $180,000.00 ($1,260,000.00)
Net Income/(loss) $900,000.00
2. Income statement based on the variable costing concept.*
Sales $10,800,000.00
Less Cost of Goods Sold
Beginning Inventory $0
Add Cost of Goods Manufactured 9,280,000.00
Less Ending Inventory ($928,000.00) ($8,352,000.00)
Contribution $2,448,000.00
Less Expenses :
Fixed manufacturing cost $320,000.00
Selling and administrative expenses:
Variable $1,080,000.00
Fixed $180,000.00 ($1,580,000.00)
Net Income/(loss) $868,000.00
3. Reason
Fixed Costs that are deferred in Ending Inventory units under adsorption costing has resulted in absorption costing having a larger profit.
Explanation:
Production units 80,000
Less units Sold (72,000)
Ending Inventory units 8,000
absorption costing calculations
Manufacturing Cost - absorption costing
$
Direct materials 6,400,000.00
Direct labor 1,600,000.00
Variable manufacturing cost 1,280,000.00
Fixed manufacturing cost 320,000.00
Total Manufacturing Cost 9,600,000.00
Ending Inventory = 9,600,000.00 × 8,000/ 80,000
= $960,000
variable costing calculations
Manufacturing Cost - variable costing
$
Direct materials 6,400,000.00
Direct labor 1,600,000.00
Variable manufacturing cost 1,280,000.00
Total Manufacturing Cost 9,280,000.00
Ending Inventory = 9,280,000.00 × 8,000/ 80,000
= $928,000
The revenues budget identifies: a. expected cash flows for each product b. actual sales from last year for each product c. the expected level of sales for the company d. the variance of sales from actual for each product
Answer:
c. the expected level of sales for the company
Explanation:
Revenue/Sales Budget is the first budget to be prepared by most companies because most businesses are sales led.
This Budget shows, the expected level of sales for the company.
In early 2016, the same Germany machinery company has interest from four prospective clients from emerging markets: Indonesia, Brazil, Russia, and South Africa. They all want to buy ten machines, but the factory can only produce ten in time. Therefore, the company has to choose only one client. Given the volatility of the domestic currencies of the four prospective clients, the CFO would like to choose the client which is least likely to cancel the order due to currency volatility. The invoice comes due on June 30, 2016. According to volatility alone, which prospective client would be most likely to cancel the order?
Answer:
Brazil
Explanation:
According to the picture below, Brazilian real is the currency that has the lowers currency volatility, its spot is 4.0685, and its forward is 4.1820. These values are way lower than the values of the other three currencies, and for this reason, the CFO should choose the Brazilian client, clearly.
Indonesia is the country that is most likely to cancel this order. This is due to its high volatility.
Following the volatility chart that is attached to this question we can clearly spot that Indonesia has the most likelihood to cancel the order.
The volatility of the currency of the country Indonesia is shown to be high and this high volatility is very much going to have an impact on trade.
When there is a weakness in the currency of a nation, the cost of import would go up.
Read more on https://brainly.com/question/13694329?referrer=searchResults
Wholemark is an Internet order business that sells one popular New Year greeting card once a year. The cost of the paper on which the card is printed is $0.40 per card, and the cost of printing is $0.10 per card. The company receives $3.75 per card sold. Since the cards have the current year printed on them, unsold cards have no salvage value. Their customers are from the four areas: Los Angeles, Santa Monica, Hollywood, and Pasadena. Based on past data, the number of customers from each of the four regions is normally distributed with mean 2,300 and standard deviation 200. (Assume these four are independent.)
What is the optimal production quantity for the card?
Answer:
9644
Explanation:
cost of paper on which a card is printed = $0.40 per card
cost of printing = $0.10 per card
profit made per card sold = $3.75
number of areas where customers are located (n)= 4
mean of customers from each region = 2300
standard deviation for each region = 200
note : each region is independent
The optimal production quantity for the card can be calculated going through these steps
first we determine
the cost of card = $0.10 + $0.40 = $0.50
selling value = $3.75
salvage value = 0
next we calculate for the z value
= ( selling value - cost of card) / ( selling price - salvage value )
= ( 3.75 - 0.50 ) / 3.75 = 0.8667
Z( 0.8667 ) = 1.110926 ( using excel formula : NORMSINV ( 0.8667 )
next we calculate
u = n * mean demand
= 4 * 2300 = 9200
б = [tex]200\sqrt{n}[/tex] = 200 * 2
= 400
Hence optimal production quantity for the card
= u + Z (0.8667 ) * б
= 9200 + 1.110926 * 400
= 9644.3704
≈ 9644
Minion, Inc., has no debt outstanding and a total market value of $211,875. Earnings before interest and taxes, EBIT, are projected to be $14,300 if economic conditions are normal. If there is strong expansion in the economy, then EBIT will be 20 percent higher. If there is a recession, then EBIT will be 35 percent lower. The company is considering a $33,900 debt issue with an interest rate of 6 percent. The proceeds will be used to repurchase shares of stock. There are currently 7,500 shares outstanding. Assume the company has a tax rate of 21 percent.
Required:
a. Calculate earnings per share, EPS, under each of the three economic scenarios before any debt is issued.
b. Calculate the percentage changes in EPS when the economy expands or enters a recession.
c. Calculate earnings per share, EPS, under each of the three economic scenarios after the recapitalization.
d. Calculate the percentage changes in EPS when the economy expands or enters a recession assuming recapitalization has occurred.
Answer:
EPS and percentage change is calculated below
Explanation:
Earnings per share (EPS) is the monetary value of earnings per outstanding share of common stock for a company.
a.EPS
Recession Normal Expansion
EBIT 9,295 14,300 17,160
Less: Interest 0 0 0
Earnings before taxes 9,295 14,300 17,160
Less: Taxes (1,952) (3,003) (3,604 )
Net Income 7,343 11,297 13,556
Number of Shares 7,500 7,500 7,500
EPS 0.979073 1.506267 1.80752
b. Percentage change
Recession = (2.683-3.833)/3.833
Recession = -35.00%
Expansion 20.00%
c. EPS
Recession Normal Expansion
EBIT 9,295 14,300 17,160
Less: Interest (2034) (2034) (2034 )
Earnings before taxes 7,261 12,266 15,126
Less: Taxes (1,525) (2,576) (3,176 )
Net Income 5,736 9,690 11,950
Number of Shares 6,300 6,300 6,300
EPS 0.91 1.53 1.89
d. Percentage change
Recession = (2.683-3.833)/3.833
Recession = -40.80%
Expansion 23.32%
Value per share = 211875/7500 = $28.25
Number of shares bought back = 33900/28.25 = 1200 shares
Tom Cruise Lines Inc. issued bonds five years ago at $1,000 per bond. These bonds had a 20-year life when issued and the annual interest payment was then 13 percent. This return was in line with the required returns by bondholders at that point as described below:
Real rate of return 4 %
Inflation premium 5
Risk premium 4
Total return 13 %
Assume that five years later the inflation premium is only 3 percent and is appropriately reflected in the required return (or yield to maturity) of the bonds. The bonds have 15 years remaining until maturity. Use Appendix B and Appendix D.
Answer:
$1,161.23
since the coupon rate is higher than the market rate, the bonds will be priced at a premium
Explanation:
In order to calculate the current market price of the bonds we can use the yield to maturity formula:
YTM = {coupon + [(face value - market value)/n]} / [(face value + market value)/2]
YTM = 11%n = 15 yearscoupon = $130face value = $1,0000.11 = {130 + [(1,000 - market value)/15]} / [1,000 + market value)/2]
0.11 x [1,000 + market value)/2] = 130 + [(1,000 - market value)/15]
0.11 x (500 + 0.5M) = 130 + 66.67 - 0.067M
55 + 0.055M = 196.67 - 0.067M
0.122M = 141.67
M = 141.67 / 0.122 = $1,161.23
Acute Company manufactures a single product. On December 31, 2014, it adopted the dollar-value LIFO inventory method. The inventory on that date using the dollar-value LIFO inventory method was determined to be $300,000. Inventory data for succeeding years follow:
Year Ended December 31 Inventory at Respective Year-End Prices Relevant Price Index (Base Year 2014)
2015 $363,000 1.10
2016 420,000 1.20
2017 430,000 1.25
Required:
Compute the inventory amounts at December 31, 2015, 2016, and 2017, using the dollar-value LIFO inventory method for each year.
Answer:
Acute Company
Year Ended December 31 Inventory at
Respective Year-End Prices Relevant Price Index Dollar-value LIFO
2015 $363,000 1.10 $330,000
2016 420,000 1.20 350,000
2017 430,000 1.25 344,000
Explanation:
a) Data and Calculations:
Year Ended December 31 Inventory at Respective Year-End Prices Relevant Price Index (Base Year 2014)
Year Year-End Prices Price Index
2015 $363,000 1.10
2016 420,000 1.20
2017 430,000 1.25
Dollar-value LIFO:
2015 = $363,000/1.10 = $330,000
2016 = $420,000/1.20 = $350,000
2017 = $430,000/1.25 = $344,000
b) The implication is that the respective year-end prices are re-calculated using the 2014 base year index. This prunes the effect of inflation on the most recent prices when compared to the base year of 2014. It makes the ending inventories for the years to be comparable since the inflation-influenced cause has been removed.
Linder Corporation invested $70,000 cash in marketable securities on September 1. On September 7 the company sold $10,000 of these investments for $15,000. On September 28 Linder sold $6,000 of the securities for $4,000.
Required:
a. Record the purchase of marketable securities on September 1.
b. Record the sale of marketable securities on September 7.
c. Record the additional sale of marketable securities on September 28.
d. Record the necessary month end fair value adjustment on September 30. The market price for Linder Corporation's remaining unsold securities was $58,000.
Answer and Explanation:
Find attached
You are analyzing two companies that manufacture electronic toys--Like Games Inc. and Our Play Inc. Like Games was launched eight years ago, whereas Our Play is a relatively new company that has been in operation for only the past two years. However, both companies have an equal market share with sales of $200,000 each. You've gathered up company data to compare Like Games and Our Play. Last year, the average sales for industry competitors was $510,000. As an analyst, you want to make comments on the expected performance of these two companies in the coming year. You've collected data from the companies' financial statements. This information is listed as follows:
Like Games
Accounts receivable: 5,400
Net fixed assets: 110,000
Total assets: 190,000
Our Play
Accounts receivable: 7,800
Net fixed assets: 160,000
Total assets: 250,000
Industry Average
Accounts receivable: 7,700
Net fixed assets: 433,500
Total assets: 469,200
Using this information, complete the following statements in your analysis.
1. A _____ days of sales outstanding represents an efficient credit and collection policy. Between the two companies, _____ is collecting cash from its customers faster than _____, but both companies are collecting their receivables less quickly than the industry average.
2. Our Play's fixed assets turnover ratio is _____ than that of Like Games. This could be because Our Play is a relatively new company, so the acquisition cost of it fixed assets is _____ that the recorded cost of Like Games's net fixed assets.
3. Like Games's total assets turnover ratios is _____, which is _____, than the industry's average total assets turnover ratio. In general, a higher total assets turnover ratio indicates greater efficiency.
Answer:
1. A LOWER days of sales outstanding represents an efficient credit and collection policy. Between the two companies, LIKE GAMES is collecting cash from its customers faster than OUR PLAY, but both companies are collecting their receivables less quickly than the industry average.
2. Our Play's fixed assets turnover ratio is LOWER than that of Like Games. This could be because Our Play is a relatively new company, so the acquisition cost of it fixed assets is HIGHER that the recorded cost of Like Games's net fixed assets.
3. Like Games's total assets turnover ratios is 1.05, which is LOWER than the industry's average total assets turnover ratio. In general, a higher total assets turnover ratio indicates greater efficiency.
Explanation:
DSO = (accounts receivable / credit sales) x 365
DSO industry = (7,700 / 510,000) x 365 = 5.5 days
DSO Like Games = (5,400 / 200,000) x 365 = 9.9 days
DSO Our Play = (7,800 / 200,000) x 365 = 14.2 days
Fixed asset turnover ratio = net sales / average fixed assets
Fixed asset turnover ratio industry = 510,000 / 433,500 = 1.18
Fixed asset turnover ratio Like Games = 200,000 / 110,000 = 1.82
Fixed asset turnover ratio Our Play = 200,000 / 160,000 = 1.25
Total asset turnover ratio = net sales / average total assets
Total asset turnover ratio industry = 510,000 / 469,200 = 1.09
Total asset turnover ratio Like Games = 200,000 / 190,000 = 1.05
Total asset turnover ratio Our Play = 200,000 / 250,000 = 0.8
The following information pertains to Yuji Corporation:
January 1, 20X1 December 31, 20X1
Raw materials inventory $34,000 $38,000
Work-in-process inventory 126,000 145,000
Finished goods inventory 76,000 68,000
Costs incurred during the year 20X1 were as follows:
Raw material purchased $116,000
Wages to factory workers 55,000
Salary to factory supervisors 25,000
Salary to selling and administrative staff 40,000
Depreciation on factory building and equipment 10,000
Depreciation on office building 12,000
Utilities for factory building 5,000
Utilities for office building 7,500
Required:
Sales revenue during 20X1 was $300,000. The income tax rate is 21%. Compute the following:
a. Cost of raw materials used.
b. Cost of goods manufactured/completed.
c. Cost of goods sold.
d. Gross margin.
e. Net income.
Answer:
a. Cost of raw materials used.$ 112,000
b. Cost of goods manufactured/completed.$ 188,000
c. Cost of goods sold. $ 196,000
d. Gross margin. $ 104,000
e. Net income. $ 35155
Explanation:
Yuji Corporation
Cost Of Goods Sold Statement.
Beginning Raw materials inventory $34,000
Add Raw material purchased $116,000
Less Ending Raw materials inventory $38,000
Direct Materials Used $ 112,000
Add
Direct Labor Wages to factory workers 55,000
FOH $ 40,000
Utilities for factory building 5,000
Salary to factory supervisors 25,000
Depreciation on factory building and equipment 10,00
Total Manufacturing Costs $ 207,000
Add Beginning Work-in-process inventory 126,000
Cost of goods available for manufacture $ 333,000
Less Ending Work-in-process inventory 145,000
Cost of goods manufactured/completed $ 188,000
Add Beginning Finished goods inventory 76,000
Cost of goods available for sale $ 264,000
Less Ending Finished goods inventory 68,000
Cost of goods sold $ 196,000
We add and subtract as per format to get the required amounts.
Yuji Corporation
Income Statement
Sales revenue $300,000
Less Cost of goods sold $ 196,000
Gross margin $ 104,000
Less Selling and Administrative Expenses
Salary to selling and administrative staff 40,000
Depreciation on office building 12,000
Utilities for office building 7,500
Profit Before Income Tax 44,500
Income Tax ( 21% of 44,500) $ 9345
Net Income $ 35155
Nanjones Company manufactures a line of products distributed nationally through wholesalers. Presented below are planned manufacturing data for the year and actual data for November of the current year. The company applies overhead based on planned machine hours using a predetermined annual rate.
Planning Data
Annual November
Fixed manufacturing overhead $1,200,000 $100,000
Variable manufacturing overhead 2,400,000 220,000
Direct labor hours 48,000 4,000
Machine hours 240,000 20,000
Data for November
Direct labor hours (actual) 4,200
Direct labor hours (plan based on output) 4,000
Machine hours (actual) 21,600
Machine hours (plan based on output) 21,000
Fixed manufacturing overhead $101,200
Variable manufacturing overhead $214,000
The fixed overhead volume variance for November was
a. $1,200 unfavorable.
b. $5,000 favorable.
c. $5,000 unfavorable.
d. $10,000 favorable.
Answer:
Manufacturing overhead volume variance= $1,200 unfavorable
Explanation:
First, we need to calculate the predetermined overhead rate:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Fixed Predetermined manufacturing overhead rate= 1,200,000/240,000
Fixed Predetermined manufacturing overhead rate= $5 per machine hour
Now, to calculate the fixed manufacturing overhead volume variance, we need to use the following formula:
Manufacturing overhead volume variance = Actual Factory Overhead - Budgeted Allowance Based on Standard Hours
Manufacturing overhead volume variance= (101,200) - (5*20,000)
Manufacturing overhead volume variance= $1,200 unfavorable