Answer:
evaporation
Explanation:
Evaporation occurs when a liquid changes to a gas. During evaporation, molecules gain enough thermal energy to escape from the liquid surface into the air as water vapor.
hope this helps
A glass container was initially charged with 1.95 moles of a gas sample at 3.75 atm and 21.7 °C. Some of the gas was released as the temperature was increased to 28.1 °C, so the final pressure in the container was reduced to 0.998 atm. What quantity in moles of the gas sample are present at the end?
Answer:
45830.4 moles
Explanation:
Ideal gas law is the hypothetical equation in which the pressure, volume, and temperature of the gas are directly related. It can be denoted as:
PV = nRT
The ideal gas law is:
PV = nRT
where,
P = Pressure
V = Volume
R = Gas constant
T =Temperature
n = moles
Given:
Moles in container = 1.95
Temperture = 294.85 K
Pressure = 3.75 atm
Volume =?
Substituting the values:
V = nRT/P
V = 1.95 × 0.082 × 294 / 3.75
Volume = 12.5 L
Now, the condition when changed, such that temperature is 301.25 K, pressure is 0.998 atm, and Volume is 12.5 L, then moles will be equal to:
PV/RT = n
0.998 × 12.5 / 0.082 × 301.25 = n
n = 45830.4 moles
Therefore, 0.521 moles is still present in the container.
To know more about ideal gas law, refer to the following link:
brainly.com/question/12124605
What does the spheres represent?
Please help?
Answer:
the N at the top is north bottom is south w on your left is west and e of your right is east
Draw the structures, including stereochemistry, of the two intermediates and the final product. Use wedge‑and‑dash bonds and hydrogens on chirality centers
The structures of the two intermediates and the final product of the Grubbs catalysis reaction are shown in the attached image, with emphasis on the stereochemistry of the two intermediates and the end product.
What are intermediates?Intermediates are those species which are formed during the process of any chemical reaction which in turn finally converts into products.
Stereochemistry is a discipline of chemistry that studies the three-dimensional structure of molecules and how it influences their physical and chemical properties.
According to the question it is discussing about the Grubbs catalysis reaction which is a transition metal carbene series complex in which mixture of two optical active compounds are obtained which are the intermediates which finally gives product after reduction.
Hence the required structures are shown in the attached image.
To know more about stereochemistry, visit the below link:
https://brainly.com/question/12973261
#SPJ4
How does weathering help to create soil? Please Help Asap
Weathering adds organic material to the soil.
Weathering builds up the rocks that create the deepest soil layer.
Weathering compacts small particles into larger rock pieces.
Weathering breaks parent material into smaller pieces.
Answer:
D. Weathering breaks parent material into smaller pieces.
Explanation:
I believe it is D. because weathering breaks down and loosens it into smaller pieces.
I hope it helps! Have a great day!
Muffin ^^
Answer:
Your answer would be:
D.) Weathering breaks parent material into smaller pieces.
Explanation:
Weathering breaks down and loosens the surface minerals of rock. The broken rocks are transported to another place where it decomposes and forms soil. Therefore weathering is important for soil formation. Without it, there will be likely less soil.
Have a great rest of your day
#TheWizzer
Explain the process of photosynthesis. Make sure to give the inputs and outputs.
help im failing science
Answer:
Photosynthesis is the process by which carbon dioxide and water are converted into oxygen and glucose. The plant consumes glucose as food, and oxygen is produced as a by-product. During cellular respiration, oxygen and glucose are converted to water and carbon dioxide. Water and carbon dioxide are by-products of the process, while ATP is the energy that is transformed. Water, carbon dioxide, and energy in the form of sunshine are all inputs in photosynthesis, and the outputs are glucose and oxygen.
Answer:
photosynthesis takes carbon dioxide from our atmosphere and turns it into oxygen. A plant requires sunlight, water, and carbon dioxide to make both sugar and oxygen. . Input: For photosynthesis to take place, water from the roots, carbon dioxide from the air, and energy from the sunlight are needed. Output: Photosynthesis creates glucose (sugar) used for/stored as food and releases oxygen into the air.
Explanation:
Besides chlorine what are the chemical sanitizers approved for operations.
Iodine and quaternary ammonium are chemical sanitizers approved for operations.
What is a Sanitizer?These are chemicals which help to remove pathogens from the surface of materials.
Iodine and quaternary ammonium are able to do that in a safe manner. This is therefore the reason why both of them were approved as sanitizers and chosen as the most appropriate options.
Read more about Sanitizers here https://brainly.com/question/4713569
a system with 1 mole of an ideal gas changes its volume from 10 L to 1 L by isothermal compressoin. What is the change in entropy of the system
Answer:
ΔS=2.303 n Rlog(
V
1
V
2
)
=2.303×10×8.314log(
10
100
)=191.47 JK
−1
Thus ΔS=191.47JK
−1
Explanation:
Which effect can you observe when the starting K2Cr2O7is diluted? Does the position (lambda) of the maximal absorption peaks change? Describe your observations.
After the dillution of the solution, the wavelength of maximum absorption is decreased.
What is the wavelength of maximum absorption?The wavelength of maximum absorption is the wavelength at which the solution absorbs the maximum amount of light. It is usually shown as a hump in the spectrum.
When the starting concentration of the K2Cr2O7 is diluted, the wavelength of maxium absorption decreases.
Learn more about maximum absorption: https://brainly.com/question/26610701
A neutralization reaction between HCl and NaOH has taken place in the lab, below is the data. Please determine the concentration of the unknown HCl solution. Please make sure all final answers are written using the correct number of significant figures and using scientific notation.
1 HCl + 1 NaOH 1 H2O + 1 NaCl
Molarity of NaOH = 1.00 M
What is the change in volume of NaOH?
From the table showing the data involving the neutralization reaction between HCl and NaOH, the concentration of the HCl solution would be 0.864 M
Titration calculationFrom the available data:
Volume of acid used = 0.0351 - 0.0131 = 0.022 L
Volume of base used = 0.0575 - 0.0385 = 0.019 L
Concentration of base = 1.00 M
Number of moles of acid and base = 1
Using the equation: CaVa/CbVb = Na/Nb = 1
Ca = 1x0.019/0.022 = 0.864 M
More on neutralization reactions can be found here: https://brainly.com/question/4612545
Which element is likely to have a high thermal conductivity? antimony carbon chlorine sodium
The element which is likely to have a high thermal conductivity among given options is sodium.
What is thermal conductivity?Thermal conductivity of any substance is define as the capability of the substance to carry heat or transfer of heat.
As we know that metals are the good conductors of heat and non-metals are bad conductors, so we exclude carbon, antimony and chlorine atom from this group as they are non-metals. And sodium atom has the thermal capability.
Hence option (4) is correct.
To know more about thermal conductivity, visit the below link:
https://brainly.com/question/11213835
Answer: Option (4) is correct
Explanation:
Which of the following is pure compound?
Ethanol,petrol,steel ,tapwater
Answer:
tap water Is the pure substance
Answer:
Ethanol is pure
Explanation:
Purity meaning homogenious molecules/atoms, steel is a mix of iron and carbon, tapwater has minerals in it + fluoride etc, petrol has oxane and ethanol in it. ethanol is only ethanol and is inherently pure
The equation for the burning of hydrogen is:
2H2(g) + O2(g) → 2H2O(g)
One mole of hydrogen gas is mixed with one mole of oxygen gas and burnt. What will
be present after the reaction?
An atom moving at its root mean square velocity at 100. °c has a wavelength of. Which atom is it? assume that the atom is the most abundant isotope of an element.
The atom that moves at its rms velocity at 100°C with a wavelength of 2.31 * 10 m is : SULPHUR ( s )
Determine the molar mass of the atomTo determine the atom we will have to determine the molar mass of the atom
Applying De Broglie equation
λ = h / mv
Vrms = [tex]\sqrt{\frac{3RT}{M} }[/tex] ---- ( 1 )
Where : λ = 2.31 * 10⁻¹¹, R = 8.314 J / k.mol, T = 373 K, h = 6.626 * 10⁻³⁴ J.s
From equation ( 1 )
M = ( h² Ua ) / 3RT*λ² --- ( 2 )
where : Ua ( mass of an atom ) = 6.022 * 10²³, h = 6.626 * 10⁻³⁴, R = 8.314 J / k.mol, λ = 2.31 * 10⁻¹¹, T = 373 K
Insert values into equation ( 2 )
M ( molar mass ) = 32 g/mol
Sulphur has a molar mass of 32 g/mol therefore the atom is sulphur.
Hence we can conclude that The atom that moves at its rms velocity at 100°C with a wavelength of 2.31 * 10 m is : SULPHUR ( s ).
Learn more about sulphur : https://brainly.com/question/26328290
The single most important factor influencing potassium ion secretion is ________
The single most important factor influencing potassium ion secretion is its concentration in blood plasma.
What is Plasma?
This is the liquid portion of the blood and serves as the transport medium for nutrients in the body.
When there is a high concentration in the plasma, it maximizes the concentration gradient which favors its secretion into the urinary fluid.
Read more about Plasma here https://brainly.com/question/2901507
The single most important factor influencing potassium ion secretion is concentration.
What is Plasma?This is the liquid part of the blood present in the body and it transports nutrients throughout the body.
Whenever in the body there is high concentration of potassium ion as a result of which concentration gradient increases which in turn favors the secretion of potassium ion into the urinary fluid.
Hence concentration is the important factor.
To know more about concentration gradient, visit the below link:
https://brainly.com/question/19191811
#SPJ4
The molar mass of sucrose (C12H22O11) is 342. 3 g/mol. A chemist has a 0. 500-mol sample of sucrose. What is the mass, in grams, of this sample? 171 grams 342 grams 500 grams 684 grams.
Mass is the weight of the compound or the molecule in a sample that is given in grams. The mass of sucrose in the sample is 171 gms.
What is mass?The mass of the compound is the product of the molar mass of the compound and the number of moles of the compound in a sample.
Given,
The molar mass (m.w.t) of sucrose = 342.3 g/mol
Number of moles (n) of sucrose = 0.500 moles
The mass of sucrose is calculated as:
[tex]\begin{aligned} \rm mass &= \rm molar\; mass \times moles \\\\&= 342.3 \times 0.500\\\\&= 171.15 \;\rm gm\end{aligned}[/tex]
Therefore. the mass of sucrose in the sample is option A. 171 gms.
Learn more about mass here:
https://brainly.com/question/4058235
A heated metal object whose temperature is 50 °C is dropped into
a tub of water whose temperature is 0°C. What will happen to the
temperature of the metal and water after 5 minutes?
answer: the oject would break because of the amount of cooling added to the mass so after five minutes it would start to crust a little bit. and the temprature would decrese jarastically
Explanation:
yes
The chart below gives the atomic number and mass number of two elements.
Element I
Element II
Atomic number
10
9
Mass number
20
19
How many protons does Element II have?
09
O 10
O 19
O 20
If 15.0 mL of 12.0 M H3PO4 reacts with 100.0 mL of 3.50 M of Ba(OH)2 , which substances is the limiting reactant?
2 H3PO4 + 3 Ba(OH)2 -> 6 H2O + BA3 ( PO4 )2
Use the formula stated below
[tex]\boxed{\sf Molarity=\dfrac{Moles\:of\:solute}{Volume\:in\:L}}[/tex]
So
#H_3PO_4
No of moles[tex]\\ \tt\Rrightarrow n=0.015(12)=0.18moles[/tex]
#Ba(OH)_2
[tex]\\ \tt\Rrightarrow n=0.1(3.5)=0.35mol[/tex]
Barium hydroxide is moreHence H_3PO_4 is the limiting reagent
Answer:
hope it's helpful to you
A student has a sample of isopropanol (C3H7OH) that has a mass of 78. 6 g. The molar mass of isopropanol is 60. 1 g/mol. How many moles of isopropanol are contained in this sample? 0. 765 moles 1. 31 moles 78. 6 moles 4,720 moles.
Mole is the ratio of the mass to the molar mass of the substance and its unit is mol. The moles of isopropanol in the sample are 1. 31 moles.
What are moles?Moles are the unit of measurement of the smallest entity of atoms, molecules, and compounds.
Given,
Mass of isopropanol (m) = 78. 6 g
Molar mass of isopropanol = 60. 1 g/mol
Moles of isopropanol is calculated as:
[tex]\begin{aligned} \rm moles (n) &= \rm \dfrac{mass}{molar \; mass}\\\\&= \dfrac{78.6}{60.1}\\\\&= 1.31\;\rm moles\end{aligned}[/tex]
Therefore, moles of isopropanol are option b. 1.31 moles.
Learn more about moles here:
https://brainly.com/question/7210732
1. Given the following equation:
_____ K2PtCl4 + _____ NH3 --------> _____ Pt(NH3)2Cl2 + _____ KCl
a) Balance the equation.
b) Determine the theoretical yield of KCl if you start with 34.5 grams of NH3.
c) Starting with 34.5 g of NH3, and you isolate 76.4 g of Pt(NH3)2Cl2, what is the percent yield?
2. Given the following equation:
H3PO4 + 3 KOH ------> K3PO4 + 3 H2O
a) If 49.0 g of H3PO4 is reacted with excess KOH, determine the percent yield of K3PO4 if you isolate 49.0 g of K3PO4.
3. Given the following equation:
Al2(SO3)3 + 6 NaOH ------> 3 Na2SO3 + 2 Al(OH)3
a) If you start with 389.4 g of Al2(SO3)3 and you isolate 212.4 g of Na2SO3, what is your percent yield for this reaction?
4. Given the following equation:
Al(OH)3(s) + 3 HCl(aq) -------> AlCl3(aq) + 3 H2O(l)
a) If you start with 50.3 g of Al(OH)3 and you isolate 39.5 g of AlCl3, what is the percent yield?
5. Given the following equation:
K2CO3 + HCl --------> H2O + CO2 + KCl
a) Balance the equation.
b) Determine the theoretical yield of KCl if you start with 34.5 g of K2CO3.
c) Starting with 34.5 g of K2CO3, and you isolate 3.4 g of H2O, what is the percent yield?
The percent yield obtained from the stoichiometry of the reaction when the moles of the reactants and products are known.
What is stoichiometry?Stochiometry gives the relationship between the mass and mole or moles and volume in a reaction.
Q1)
K2PtCl4 + 2NH3 ----> Pt(NH3)2Cl2 +2KCl
Number of moles of NH3 = 34.5 g/17 g/mol = 2.03 moles
2 moles of NH3 yields 2 moles of KCl
2.03 moles of NH3 yields 2.03 moles of KCl
Theoretical yield of KCl = 2.03 moles * 75 g/mol = 154 g
Again,
2moles of NH3 yields 1 mole of Pt(NH3)2Cl2
2.03 moles of NH3 yields 2.03 moles * 1/2 = 1.015 moles
Mass of Pt(NH3)2Cl2 = 1.015 moles * 301 g/mol = 306 g
% yield = 76.4 g/306 g * 100/1 = 25%
Q2)
H3PO4 + 3 KOH ------> K3PO4 + 3 H2O
Number of moles of H3PO4 = 49.0 g/98 g/mol = 0.5 moles
If mole of H3PO4 yield 1 mole of K3PO4
0.5 moles of H3PO4 yield 0.5 moles of K3PO4
Mass of K3PO4 = 212 g/mol * 0.5 moles = 106 g
Percent yield = 49.0 g/106 g * 100 = 46%
Q3)
Al2(SO3)3 + 6 NaOH ------> 3 Na2SO3 + 2 Al(OH)3
Number of moles of Al2(SO3)3 = 389.4 g/294 g/mol = 1.32 moles
If 1 mole of Al2(SO3)3 yields 3 moles of Na2SO3
1.32 moles of Al2(SO3)3 yields 1.32 moles * 3 moles/1 mole = 3.96 moles
Mass of Na2SO3 = 3.96 moles * 126 g/mol = 498.96 g
Percent yield = 212.4 g/498.96 g * 100/1 = 43%
Q4)
Al(OH)3(s) + 3 HCl(aq) -------> AlCl3(aq) + 3 H2O(l)
Number of moles of Al(OH)3 = 50.3 g/78 g/mol = 0.64 moles
If 1 mole of Al(OH)3 yields 1 mole of AlCl3
0.64 moles of Al(OH)3 yields 0.64 moles of AlCl3
Mass of AlCl3 = 133 g/mol * 0.64 moles = 85 g
Percent yield = 39.5 g/85 g * 100 = 46%
Q5) K2CO3 + 2HCl --------> H2O + CO2 + 2KCl
Number of moles of K2CO3 = 34.5 g/138 g/mol = 0.25 moles
1 mole of K2CO3 produces 2 moles of KCl
0.25 moles of K2CO3 produces 0.25 moles * 2 moles/1 mole = 0.5 moles
Mass of KCl = 0.5 moles * 75 g/mol = 37.5 g
If 1 mole of K2CO3 yields 1 mole of H2O
0.25 moles of K2CO3 yields 0.25 moles of H2O
Mass of H2O = 0.25 moles * 18 g/mol = 4.5 g
Percent yield = 3.4 g/4.5 g *100 = 76%
Learn more about percent yield: https://brainly.com/question/12704041?
The colour of outer zone of candle flame is _________.
A. orange
B. blue
C. red
D. yellow
Answer:
Explanation:
At the outer zone of candle flame, there are more oxygen available for the combustion reaction. So the flame is yellow in color.
The answer is D. yellow.
Answer:
B. blue
Explanation:
The candle's flame is divided into three zones: blue on the outside, yellow in the midst, and black on the inside. This is the result of the wax that is formed after the meltdown of the candle.
I am joyous to assist you at any time.
What is the difference between solvation and dissociation
Answer:
The key difference between dissociation and solvation is that dissociation is the breakdown of a substance into the atoms or ions from which the substance is made of whereas solvation is the dissolution of a substance in a solvent due to the attraction forces between solvent molecules and the components.
Explanation:
Solvation refers to the process of surrounding solute particles with solvent molecules, leading to the formation of a solution. Dissociation specifically refers to the breaking apart of ionic compounds or molecules into their constituent ions when dissolved in a solvent.
Solvation occurs due to the attractive forces between the solute and solvent molecules, such as dipole-dipole interactions or hydrogen bonding. The result of solvation is the formation of a homogeneous solution where the solute particles are evenly distributed at the molecular level within the solvent.
Ionic compounds are composed of positively charged cations and negatively charged anions held together by electrostatic forces. When an ionic compound is dissolved in a solvent, such as water, the solvent molecules interact with the compound's ions, pulling them apart and surrounding them.
To learn more about the solvation, follow the link:
https://brainly.com/question/1118783
#SPJ6
please help
pick the right square
Select the correct location on the image. Objects A and B are brought close to each other. Object A will soon become positively charged. Identify the charge that must transfer for this situation to occur.
Answer:
turn it
Explanation:
Accurate information
Answer:
For The first one I think its the + if not try -
For the second one I believe its the first - sign
Explanation:
How do changes in the atmosphere from burning fossil fuels affect plant life? Select the two correct answers.
Increased carbon dioxide levels slow plant growth.
Acid rain removes nutrients from soil.
Increased nitrogen dioxide levels provide nutrients for plants.
Warmer temperatures support plant growth.
Increased ozone levels slow plant growth.
What happens when carbon dioxide from the atmosphere dissolves in seawater?(1 point)
Ocean waters become more acidic.
Ocean temperatures rise.
Ocean levels rise.
Oceans are better able to support most sea life.
Which of the following chemicals are pollutants released when people burn fossil fuels? Select the two correct answers.(1 point)
helium oxide
dihydrogen oxide
nitrogen dioxide
argon dioxide
sulfur dioxide
How does the use of fossil fuels affect the cryosphere?(1 point)
Acid rain containing sulfur dioxide corrodes sea ice and glaciers.
Higher levels of greenhouse gases in the atmosphere cause sea ice to melt.
Higher levels of ground-level ozone protect glaciers from the sun's rays.
Particulate matter in the atmosphere helps new glaciers form.
Why are rising carbon dioxide levels in the atmosphere harmful?(1 point)
Carbon dioxide increases people's risk of asthma.
Carbon dioxide blocks the sun's rays from reaching Earth's surface.
Carbon dioxide traps heat in Earth's atmosphere.
Carbon dioxide harms plant life.
Acid rain removes nutrients from soil and Ocean waters become more acidic.
Effect of burning fossil fuels on plant life and atmosphereOcean waters become more acidic when carbon dioxide from the atmosphere dissolves in seawater because the carbondioxide reacts with water produces carbonic acid.
When fossil fuels are burned, they release nitrogen oxides into the atmosphere, which contribute to the formation of smog and acid rain.
Learn more about atmosphere here: https://brainly.com/question/24925283
Answer:
How do changes in the atmosphere from burning fossil fuels affect plant life? Select the two correct answers.
-Acid rain removes nutrients from soil.
-Increased ozone levels slow plant growth.
What happens when carbon dioxide from the atmosphere dissolves in seawater?(1 point)
-Ocean waters become more acidic
Which of the following chemicals are pollutants released when people burn fossil fuels? Select the two correct answers.(1 point)
-nitrogen dioxide
-sulfur dioxide
How does the use of fossil fuels affect the cryosphere?(1 point)
-Higher levels of greenhouse gases in the atmosphere cause sea ice to melt.
Why are rising carbon dioxide levels in the atmosphere harmful?(1 point)
-Carbon dioxide traps heat in Earth's atmosphere.
Explanation:
(1.) Once we confirm other planetary systems, what do you think the
next stage of exploration should be?
The next stage of exploration should be gathering information about the planetary system.
What is the next stage of exploration?Once we confirm other planetary systems, the next stage of exploration should be the use of instruments that helps us to collect information about that planetary objects so we can conclude that the next stage of exploration should be gathering information about the planetary system.
Learn more about exploration here: https://brainly.com/question/13335713
How are Dams good and Bad for the environment?
Help!!
Answer:
Dams can stop a place from flooding and give us electricity without creating pollution. It can also make a place dry and finish water for animals
Explanation:
Hikers noticed that a sealed bag of potato chips puffs up when taken to the top of a mountain. suppose that at the valley floor below, the air pressure is 1.0 atm, the temperature is 25°c, and the volume of the bag is 0.985 l. at the top of the mountain, the temperature is 22°c and the bag has puffed up to 1.030 l. what is the air pressure on top of the mountain? type in your answer using the correct number of significant figures. formula: p1v1 t1 = p2v2 t2 atm
Gas law gives the relation between the volume, moles, pressure, and temperature of the gas. The air pressure at the top of the mountain is 0.945 atm.
What is Gas law?Gas law gives the direct relationship between the pressure and the volume of the gas with that of the temperature of the gas.
Given,
Initial pressure = 1.0 atm
Initial volume = 0.985 L
Initial temperature = 298.15 K
Final pressure = ?
Final volume = 1.030 L
Final temperature = 295.15 K
The final pressure at the mountain top is calculated as:
[tex]\begin{aligned} \rm \dfrac{P_{1}V_{1}}{T_{1}} &= \rm \dfrac{P_{2}V_{2}}{T_{2}}\\\\\dfrac{1 \;\rm atm \times 0.985 \;\rm L}{ 298.15 \;\rm K} &= \;\rm \dfrac{P_{2} \times 1.030 \;\rm L}{295.15\;\rm K}\\\\&= 0.945 \;\rm atm\end{aligned}[/tex]
Therefore, the pressure on the top of the mountain is 0.945 atm.
Learn more about combined gas law here:
https://brainly.com/question/3050574
How does learning about elements,compounds and i turns allow us to understand the matter around us
Answer:
shows how anything like each thing is composed of for instance see how water is made of: hydrogen and oxygen which makes it a compound
The elements are the basic things by which everything in the world is build up. Different elements combine to form compounds. There are various kinds of inorganic and organic compounds around us that create the matter.
What are elements ?Elements are the basic things of any substance in the world. There are 118 known elements which can be found in the modern periodic table. These elements include metals, gases, and semi metals.
Atoms of same elements forms molecules. Atoms of different elements combines to form the compounds. There are various types of compounds such as ionic compounds, covalent compounds, coordination complex etc.
Water is a compound formed from the elements hydrogen and oxygen. The table salt we use every day is a compound, sodium chloride. Similarly we can find there are many compounds that we use everyday are creating the matter in the world.
Find more on elements:
https://brainly.com/question/13025901
#SPJ3
i don’t really know how to do this and need help
Answer:
3,550,000
Explanation:
3 significant figures is a number which has 3 figures
and zeros ( zero is not a figure )
Answer:
3550,000
Explanation:
Rounding rule:
If > 5 enter one
If < 5 rounding
Note:
< = less than
> = greater than.
Solve:
Base on the given:
it < 5 rounding
Thus,
3545,530 ≈ 3550,000
~Lenvy~
What are the answers for The brainPOP digestive systems 1-10
Answer:
Q.
Why do we need to break apart the food we eat?
answer choices
so it can fit in our stomachs
so our bodies can use the nutrients from the food
so liquids can be separated from solids
so that our enzymes have something to do
2nd option
Where does digestion begin?
answer choices
mouth
stomach
large intestine
small intestine
first option
Q.
Chewing is an example of what kind of digestion?
answer choices
dental
fragmentary
chemical
mechanical
last option
If you wanted to find the glands that produce salivary amylase, where would you look?
answer choices
mouth
throat
intestines
stomach
first option
Place in order:
A. food enters large intestine
B. food enters small intestine
C. food enters esophagus
answer choices
A B C
C B A
C A B
B A C
2nd option
Hydrochloric acid can burn your skin yet it exists in your stomach. How can this be?
answer choices
small intestines absorb the acid
stomach lining protects you against burns
food in stomach absorbs the acid
the acid in your stomach is different from the acid in a chemistry lab
2nd option
What is chyme?
answer choices
a type of digestive enzyme
what food is called after it has been digested by the stomach
a chemically active part of the small intestine
a passage that leads from small to large intestine
2nd option
Q.
What might happen if you had your pancreas removed?
answer choices
your intestines might have trouble breaking down food
your stomach might have trouble producing hydrochloric acid
you would not be able to chew properly
you would have trouble producing saliva
first option
Q.
What is the main function of villi?
answer choices
to move food from the stomach to the small intestine
to absorb nutrients into the bloodstream
to absorb water from chyme
to move food from small intestine to large intestine
2nd option
Q.
What might happen if your large intestine did not absorb water from chyme?
answer choices
you couldn't digest food
you wouldn't be able to go to the bathroom
you'd become dehydrated
solid waste wouldn't be moved to the rectum
3rd option
Explanation:
I hope this helps
I got my answers in quiziz