engineering economics​

The approximate emmission of Crimson is 620 to 700 nm

We would have to identify the wavelength that are emitted by the strontium.

In the strontium test, the observations would be based on the flames that are crimson red.

In the color wheel, the color with the highest wavelength is red at 620 to 700 mm.

3. The original color that is present in the test comes from when metal salt is heated. This usually causes its outer electrons to be excited, falling back to different energy wavelength in the spectrum.

Higher wavelength = loosely bound electron in the outer shell so that less energy is required.

The metals are red when they are burnt. The red color is the one with the highest wave length.

This is defined as the existing distance that is found between waveds. These could be sound or electromagnetic waves.

Read more on wavelength here: https://brainly.com/question/10728818

A lanyard should be used to connect all tools to prevent injury to others or damage to the work below when working above the ground.

OSHA is an abbreviation for occupational safety and health administration and it is an agency of the federal government that is saddled with the following responsibilities:

According to the Occupational Safety and Health Administration (OSHA), a lanyard should be used by workers to connect all tools, so as to prevent injury to other workers or even a damage to the work below, especially when working above the ground.

Read more on OSHA here: brainly.com/question/17199752

Answer:

Aerospace engineering is a broader subject that includes both aircraft and spacecraft studies. Aeronautical engineering focuses more on aircraft design and construction that flies within the Earth's atmosphere.

Explanation:

Aerospace engineering is a vast topic that involves research on both airplanes and spacecraft, further explained in the following paragraph.

The median annual pay for aerospace engineers is $116,500, according to the US Bureau of Labor Statistics. Aerospace engineers, on the other hand, make $56.01 per hour. According to Glassdoor, the national average compensation for an Aeronautical Engineer in the United States is $80,000.

Aerospace engineering is a vast topic that involves research on both airplanes and spacecraft. Aeronautical engineering is concerned with the design and building of aircraft that fly within the atmosphere.

Learn more about the Aerospace or aeronautical engineering profession here:

https://brainly.com/question/16557541

#SPJ4

Answer:

A

Explanation:

He says he loves work, but wants more time with his family, so this is in conflict with some of his other desires.

The minimum safety power that is safely dissipated using a transistor of height 0.4cm and diameter 0.06cm is 0.04665

[tex]\pi DL +\frac{\pi }{4} D^2\\\\Area = 3.14 * 0.6*0.4+\frac{3.14}{4} *0.6^2[/tex]

D = diameter = 0.6cm

Length = height = 0.4cm

Area = 1.0367cm²

hA (Ts - Tair)

30 * 1.0367 x 10⁻⁴(70-55)

= 0.04665

The minimum safety power that is safely dissipated is 0.04665W

Read more on energy here: https://brainly.com/question/13881533

Answer:

I would say only A

Explanation:

steering dampeners are applied to heavy-duty and off-road vehicles in order to help stabilize and balance out your steering in rough terrain. luxury cars won't have them because, well, they are cars, and cars are not used for off-roading. trucks and SUVs and sometimes vans are though, which makes sense more than just a random luxury car with dampeners just sitting there for no reason at all when heavy-duty vehicles need them more than the car.

Answer:

Number1 = input("Choose a number: )

Number2 = input("Choose a second number: )

if number1 > number2:

print(number2\nnumber1)

else:

print(number1\nnumber2)

Explanation:

I'm assuming that you want it in python.

Answer:

The purpose of networking is to make new friends, industry acquaintances, and even business partners.

Answer:

C which is square millimeters which is right.

Answer:

What are some types of analysis that an engineer could use to test a design? (Possible answers may relate to: mathematical calculations; testing of stress, loads or function; or computer-aided analysis.)

hope it helps you..✌️

Answer:

[tex]{\large{\pink{ \overline{ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: }}}}{}\ _{ \red{ \heartsuit}} [/tex]

what is you're question :)

Answer:

Explanation:

what is the question

Explanation:

Structural Engineers create drawings and specifications, perform calculations, review the work of other engineers, write reports and evaluations, and observe construction sites. A Professional Engineer's license is required in order to practice Structural Engineering.

The sounds heard during the first phase of blood-pressure measurement are called the Korotkoff sounds.

The kind of sound that is bern heard during blood pressure is Korotkoff sounds which are produced underneath the distal half of the blood pressure cuff.

The sounds can be noticed when cuff pressures are between systolic and diastolic blood pressure.

Learn more about sounds at;

https://brainly.com/question/25871632

Tensile stress in a thin wall spherical shell is given by

σ = ( p r ) /2t

This is the type of stress that involves pulling out. it is the opposite of compressive stress.

The tensile stress, σ  at the circumference of the shell is the hoop stress. The value equals that of pressure acting on the area.

Therefore:

σ * 2πr * t = p * πr^2

where

2πr = circumference of a circle

πr^2 = area of a circle

p = internal pressure

t = thickness

σ * 2πr * t = p * πr^2

σ = ( p r ) /2t

Read more Tensile stress here:

https://brainly.com/question/25748369

Answer:

Television's use 2 portions of the electromagnet spectrum and that is Visible light and radio waves.

Explanation:

Visible light helps us see the picture on the television and radio waves are used to send pictures to television's screen.

In Engineering, a synchronous motor is sometimes referred to as synchronous capacitor but not a synchronous inductor.

A synchronous motor can be defined as an alternating current (AC) electric motor in which the rotation speed of the shaft is directly proportional to the frequency of the supply current, especially at steady state.

Basically, a synchronous motor is sometimes referred to as a synchronous capacitor because it can be used to correct the power factor (PF) of a lagging load such as an induction motor.

However, a synchronous motor cannot be called a synchronous inductor because the rotation speed of the shaft is not proportional to the synchronous speed of the motor. Thus, they are called an synchronous motor.

Read more on synchronous motor here: https://brainly.com/question/12975042

To find how many ways, you must simply multiply 10 tasks and 5 exercises

    Ways: = 10 * 5 = 50 ways

Hope that helps!

Answer:

Hold the tape in place and go down to the end.

Explanation:

Answer:

Explanation:

he metallic rod is fixed into the dies by using a die holder and then a drawing head is used in which the metallic rod is fixed through a jaw mechanism. And then the bar is stretched and slides between the surfaces of the die

Answer:

The rotary engine works on the same basic principle as the piston engine: combustion in the power plant releases energy to power the vehicle. However, the delivery system in the rotary engine is wholly unique. The piston engine performs four key operations: intake, compression, combustion, and exhaust.

Explanation:

Answer:

The sampling technique that can be used to selecting the participants will be a random sampling.

It should be noted that sampling simply a method in statistical analysis that predetermined observations are taken from the population.

In this case, the sampling technique that can be used to selecting the participants will be a random sampling. This is need to give everyone an equal chance of being selected.

Learn more about sampling on:

https://brainly.com/question/17831271

The things that the professional in an increased demand green construction occupation can add in the construction of a shopping center include:

It should be noted that a green building simply means a design, construction, or operation that eliminates the negative impact on the climate and natural environment.

In this case, in order to illustrate energy efficiency, it's important to use radiant floors, geothermal system, energy efficient window systems, etc.

Learn more about green building on:

https://brainly.com/question/6560347

Hi :)

The answer is B. A cast part

How does a cast part form?

Molten material is then poured into a mould cavity that takes the form of the finished part. The molten material then cools, with heat generally until it solidifies into the desired shape.

Hope this helps!

Give the other person brainliest, they answered first

Hope this helps!

~NatLikesAnime~

#LearningWithBrainly.

#LearnWithBrainly

Answer:

He could put up advertisements all over the town and pay a few websites or search engines to have his company and ads be more common. He should also use some designs and make his company's sign very adequate.

Answer:

0.25 m/s²

Explanation: