Explain why a fish under water appears to be at a diffrent depth below the surface than it actually is does it appear deeper or shallower

The value of moment of Inertia of the solid cylinder will be 0.19 kg/m^2

Any item that can be rotated has the property of rotational inertia. It is a scalar value that indicates how challenging it is to alter an object's rotational velocity around a certain rotational axis. The role of mass in linear mechanics is analogous to that of rotational inertia in rotational mechanics.

The formula I = 1/2 [M (R_2^2 + R_1^2)] may be used to calculate the moment of inertia of a hollow cylinder revolving along an axis passing through the centre of the cylinder. The cylinder in this instance will have a mass of M and internal and exterior radii R1 and R2, respectively.

The cylinder's moment of inertia about its axis is (MR^2)/2.

Where, M - mass of object, R = radius of the cylinder.

After putting all the values. we will get,

[tex]=\frac{27 \mathrm{~kg} \cdot(0.24 \mathrm{~m} / 2)^2}{2} \approx 0.19 \mathrm{~kg} \cdot \mathrm{m}^2[/tex]

For more such questions on moment of Inertia of the solid cylinder

https://brainly.com/question/27380063

#SPJ4

The force exerted on the rope by the ceiling is in the vertical direction. This means that the force is pushing straight down on the rope and is perpendicular to the plane of the ceiling.

The force exerted on the rope by the ceiling is the result of the gravity of the rope itself and the weight of any objects or materials that are attached to the rope.

In order for the force to remain in the vertical direction, the rope must be secured at the top of the ceiling and not allowed to move in any other direction. If the rope were to move in any other direction, the force exerted on the rope by the ceiling would no longer be in the vertical direction and the rope would no longer remain secure.

Learn more about force:

https://brainly.com/question/25239010

#SPJ4

Answer:

9000 Joules

Explanation:

Potential energy = mass x acceleration due to gravity x height

mass = 20kg

acceleration due to gravity = 10m/s2

height = 45 meters

20 x 10 x 45 = 9000 Joules

Answer:

translational energy

Explanation:

because is diatomic

Answer:

Weight of a 35kg object on Earth is 350N, while it is 56N on the Moon.

Explanation:

The conversion of mass (kg) to weight (N) on Earth is 1kg to 10N.
Thus, the weight of a 35kg mass on Earth is
35kg × 10 = 350N

On the Moon, conversion of mass to weight is 1kg to 1.6N.
Thus, the weight of a 35kg mass on the Moon is
35kg × 1.6 = 56N

Remember, mass remains constant regardless of location, while weight depends on the strength of the gravitational field.

To find the average speed of the cyclist, we need to divide the distance traveled by the time it took to travel that distance. So we would divide 100 meters by 40 seconds, which gives us 2.5 meters per second. This is the average speed of the cyclist.

Answer:

The Average Speed is 2.5metres per second

Explanation:

Using Distance,Time,Speed Triangle,

[tex]S = \frac{D}{T}[/tex]

[tex]S = \frac{100}{40}\\[/tex]

[tex]S = 2.5[/tex]

Hence ,  the average speed is 2.5m/s

A body's mass is the total amount of its material. Gravitational pull on a body is represented by weight.

The relationship between mass and weight Mass is a measure of inertia, whereas weight is a measure of force.

Both of these names are frequently used in the same sentence. Calculating how much matter a body contains requires knowing its mass.

Weight is a unit of measurement for the force that gravity's acceleration has on a mass.

Weight is a measurement of how the force of gravity works upon a mass, whereas mass is a measure of the amount of matter in a material.

In order to determine how much matter a body contains, we need to use its mass.

To learn more about mass and weight refer to:

brainly.com/question/1966951

#SPJ4

The torque of a lever is equal to the perpendicular force multiplied by the length of the lever arm, which is the distance from the fulcrum of the lever.

The formula for torque is rF=rFsin(r). Torque is, in other words, the cross product of the distance vector (the distance between the pivot point and the point at which force is applied) and the force vector, where the angle 'a' between r and F is.

The SI unit for torque is the Newton-metre, or kgm2sec-2. Taking into account the formula Torque = Force X Distance While distance and force are measured in meters and newtons, respectively, torque is measured in newton-meters.

To know more about torque visit:-

https://brainly.com/question/6855614

#SPJ4

Answer:

  d.  600 J

Explanation:

You want to know the work done to lift a box using a lever with a mechanical advantage of 2, if the work required without the lever is 600 J.

A lever trades force for distance. That is raising the box a distance of 6 m requires moving the lever arm a distance of 12 m, but only half the force is required. The product of force and distance is the same.

The total required work is unchanged: 600 J.

__

Additional comment

Actually, more work is required to lift the box using the lever. There is work applied to the box, and there is more work applied to moving the lever. (We have to assume a massless lever with no friction in these problems.)

Two charged particles are located on the x axis.

What are charged particles?

Charged particles are particles that have either a positive or negative electrical charge. These particles can be found in many forms in nature, such as electrons, protons, and ions. These particles are a key component of electricity, and can be used as a source of energy. Charged particles can be found in atoms and molecules, where they interact with other particles and affect their behavior. They can also be found in plasma, a state of matter that is made up of ions and electrons.

1. Start by writing out the equation for the electric field at the origin:

E = (kQ)/r^2

2. Substitute in the values for Q, k, and r, and solve for the unknown charge:

E = (2keQ)/a^2

E = (2k(+Q))/(3a)^2

+Q = (2kE)/(3a)^2

Since the electric field has a magnitude of 2keQ / a2, the unknown charge can be either positive or negative:

+Q = ±(2kE)/(3a)^2

To know more about charged particles,

https://brainly.com/question/10183222

#SPJ4

Solar and wind are renewable resource types.

A renewable resource is an energy source that comes from nature. This is renewable and unlimited. It can be created by utilizing increasingly sophisticated technological developments so that it can become an alternative energy source.

Apart from solar and wind power, renewable energy can also be obtained from hydropower, geothermal, biomass, solar power, wind power, sea heat, waves, and tidal.

Some of the benefits of renewable resources are:

• Minimizing the effects of global warming

• Unlimited energy sources

• Save resources as well as expenses

• In several countries it can create jobs and opportunities

• Easier and cheaper maintenance

• Some technologies are easy to implement in remote areas.

More about Renewable Resources on:

https://brainly.com/question/19604560

#SPJ4

"Effort multiplied by an arm equals burden multiplied by an arm," The various loads on the proportionally shorter load arm can be moved by the effort arm.

A lever is a straightforward device with a solid beam and a fulcrum. The effort (input force) and load (output force) are applied to the beam's ends. The pivot of the beam is thought to be the fulcrum.

Levers are devices that increase force, to put it simply. Because they merely have the handle and the fulcrum, we refer to them as "basic machines." The "arm" of the lever is the handle or bar; it is the portion that you push against or pull towards.

To know more about law of lever visit:-

https://brainly.com/question/2450974

#SPJ4

The number of electrons that move in a circuit where a current of 2.0 A flows for 2.0 minutes will be [tex]1.5X10^2^2[/tex]. The correct option is C.

Electrical charge carriers, often electrons or atoms deficient in electrons, travel as current. The capital letter I is a typical way to represent current.

A current of 2A passes through a wire for 20 minutes. The number of electrons that crossed the cross-section in this period is

Given that,

Current =2A

Time t= 20min = 20×60s

Let,

n and e be the number and charge of electrons in time t.

So,

The total charge, q(say) in the wire is

q = ne

Hence, the current flowing in time t is

I = q/t

I = ne/t

n = It/e

[tex]n=\frac{2(20X60)}{1.6X10^{-19}} \\\\n=\frac{2400}{1.6X10^{-19}}\\\\n=1.5X10^{22}[/tex]

Thus, the answer is [tex]1.5X10^2^2[/tex], means the correct option is C.

For more details regarding current, visit:

https://brainly.com/question/13076734

#SPJ1

Your question seems incomplete, the missing options are:

[tex]1.5X10^{21}\\\\1.5X10^{20}\\\\1.5X10^{22}\\\\1.5X10^{21}\\\\1.5X10^{23}[/tex]

Determine the highest centrally applied vertical load p the block can support if the material breaks when the average normal stress reaches 120 psi.

To learn more about material refer to:

https://brainly.com/question/27813161

#SPJ4

The height of the hill can be calculated using the formula PE = mgh, where m is the mass, g is the acceleration due to gravity (9.8 m/s2), and h is the height of the hill. So, solving for h, we get h = PE/mg = 1000 J/ (60.0 kg*9.8 m/s2) = 10.2 m.

Therefore, the height of the hill is 10.2 m.  The potential energy of an object is the energy it possesses due to its position or state. As the object moves, its potential energy can be converted into kinetic energy, or the energy it has due to its motion. In this case, the rollerblader is on top of the hill, so it has potential energy due to the height of the hill.  

The formula for potential energy is PE = mgh, which means that the potential energy is equal to the mass multiplied by the acceleration due to gravity multiplied by the height. In this case, the mass is known to be 60.0 kg, and the potential energy is known to be 1000 J. By using the formula and substituting in the known values, the height of the hill can be calculated.

The height of the hill is determined to be 10.2 m, which is relatively small. This means that the hill is not too steep, and the rollerblader would not have to use a lot of energy to go down it.

To know more about  potential energy refer to the  link  brainly.com/question/24284560

#SPJ4

Answer:

Below

Explanation:

17.4 inches = 441.96 mm      14.8 inches = 375.92 mm

volume = 441.96 X 375.92 X T  

                                   = 166141.6 T  mm^3  <===where T = thickness in mm

Volume X density = mass

 166141.6 T mm^3  * 2.7 gm/cm^3  * cm^3 / 1000mm^3  = 10.8 gm

     solve for T = .024 mm

he JM will heighten (exaggerate) lower limb tendon reflexes by countering some of the normal descending inhibition the brain sends to the reflex arc.

A medical technique called the Jendrassik manoeuvre involves the patient clenching their teeth, flexing both sets of fingers into a hook-like shape, and interlocking those sets of fingers. The patellar reflex is then induced by striking the tendon below the patient's knee with a reflex hammer.

When the technique is not being used, the reflex outcome of the same movement is compared to the induced reaction. When a patient is focused on the technique, a bigger reflex reaction is frequently seen: "Afferent activity brought on by such muscle tension may activate a weak or seemingly absent reflex.

This is the actual justification for the procedure, not that it is intended to divert the patient's attention, a common misperception that persists to this day." This result

To be learn more about procedure refer to:

https://brainly.com/question/27176982?referrer=searchResults

#SPJ1

Acceleration increase down a ramp, due to an object is free to move under the influence of gravity. That's why acceleration increases.

Acceleration is a measure of how quickly an object's velocity changes. On a ramp, an object is free to move under the influence of gravity. The gravitational force acting on an object is always directed downward, and the force of friction acting on an object is directed upward. The force acting on an object moving down a ramp is the force of gravity minus the force of friction. Since the force of gravity is greater than the force of friction, the net force acting on the object is directed downward, which causes the object to accelerate downward. The angle of the ramp affects the force of friction, as the greater the angle of the ramp, the greater the force of friction, and the less the net force acting on the object and less acceleration. Therefore, acceleration increases down a ramp because the net force acting on an object is directed downward and the angle of the ramp affects the force of friction.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

If you pound a feather with a hammer, which one feels a greater force always the hammer both feather moves, then it felt the greater force.

What is the force?
Force is an influence that produces a change in the motion of an object. It is measured in units of mass times acceleration, or newtons (N). Force is a vector quantity, meaning it has both magnitude and direction. Force can cause an object to accelerate, decelerate, remain in motion, change direction, or alter shape. Examples of forces include gravity, friction, tension, and magnetism. Forces can also be generated by electrical, thermal, and nuclear energy. All forces are generated by the interaction of two objects and can be balanced or unbalanced. Unbalanced forces will cause an object to move or accelerate and balanced forces will cause an object to remain stationary or in motion at a constant speed.

To learn more about force

https://brainly.com/question/12785175

#SPJ4

Both the features of waves and particles can be seen in light.only photons and particles only photons and particles, only waves.

Both a wave as well as a particle description of light are possible.The dual character of light has been highlighted in particular by two investigations.When we consider that light is composed of tiny particles, we refer to those particles as "photons."

The following is the image for 'photons & particles combining waves and particles'.While electromagnetic radiation behaves both like a wave and a particle at the same time, it propagates according to linear wave equations and can only be released or absorbed in discrete pieces.

To know more about particles visit:

https://brainly.com/question/2288334

#SPJ4

The correct option is A, the Sun's path, as viewed from the equator, is highest in the sky on the spring and fall equinoxes.

Fall equinox is an astronomical event that marks the transition from summer to autumn in the Northern Hemisphere and from winter to spring in the Southern Hemisphere. On the day of the fall equinox, the sun rises directly in the east and sets directly in the west. This marks the end of the summer season and the beginning of the autumn season. During the fall equinox, all areas of the Earth experience nearly the same amount of daylight and darkness.  

The fall equinox occurs in the middle of September in the Northern Hemisphere and in the middle of March in the Southern Hemisphere. It is the first day of autumn and the last day of summer in the Northern Hemisphere and the first day of spring and the last day of winter in the Southern Hemisphere.

The fall equinox marks the return of balance after the summer solstice, during which the days are the longest and the nights are the shortest. During the fall equinox, the day and night are of equal length and the sun is directly over the equator. After the fall equinox, the days become gradually shorter and the nights become gradually longer.

To learn more about Fall equinoxes visit here:

brainly.com/question/907434

#SPJ4

A polarizing filter can be beneficial for a photographer when taking outdoor pictures because it can reduce glare and reflections from surfaces such as water and glass.

it can also enhance colors, darken blue skies, and reduce the amount of light entering the lens, allowing for more even exposure. This can be especially useful in situations where the sun is very bright and can create harsh shadows and overexposed highlights. The polarizing filter can also reduce the amount of haze in the atmosphere, which can improve the overall clarity of the image. These effects can help a photographer capture more vivid and detailed images, making them stand out from the crowd.

to know more about  polarizing filters refer to  the  link brainly.com/question/13963189

#SPJ4

The minimum amplitude of the resultant pulse is 10 cm.

The amplitude of a pulse is the maximum height of the waveform measured from the baseline, also known as the peak-to-peak amplitude. In the case of two pulses, A and B, the minimum amplitude of the resultant pulse is determined by the vector sum of the individual amplitudes of the two pulses.

When two pulses are in phase, the resultant pulse amplitude is the sum of the individual amplitudes, which in this case is 20 cm + 10 cm = 30 cm.

However, if the two pulses are out of phase, the minimum amplitude of the resultant pulse is determined by the difference between the amplitudes of the two pulses. In this case, the minimum amplitude of the resultant pulse would be |20 cm - 10 cm| = 10 cm.

So, the minimum amplitude of the resultant pulse is 10 cm.

Learn more about  minimum amplitude in brainly.com/question/26033167

#SPJ1

Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit.

What do you mean by "electric shock"?

Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit. This can happen when the person comes into contact with a live conductor, such as a wire carrying an electrical current, or when the person becomes part of the circuit, such as by touching both a live wire and a ground.

Electric shock can cause a range of symptoms depending on the severity and duration of the exposure, including muscle contractions, burns, internal injuries, and in severe cases, cardiac arrest or death. Electric shocks can also cause electrical burns which can be serious.

When a person comes into contact with a current, it can cause an electric shock, which can range in severity from a mild tingling sensation to severe injury or death. Factors that determine the severity of an electric shock include the amount of current flowing through the body, the duration of contact with the current, and the path the current takes through the body.

It is important to note that Electric shock can be prevented by following safety guidelines and by using proper safety equipment when working with electrical equipment and circuits.

Hence, Electric shock occurs when a person comes into contact with a current flowing through an electrical circuit.

To learn more about electric shock from the given link:

https://brainly.com/question/14980202

#SPJ4

In the United States, there were 3,494 radio broadcasting stations in 2009. Radio reaches approximately 68 percent of American customers aged 12 and older on average each day, and 236 million people listen to radio every week, according to records.

Since their beginnings at the turn of the 20th century, radio stations in the United States have changed. Following the establishment of 8MK in Detroit in 1920, thousands of private and public radio stations have operated across the country. There are several different ways to organise the lists of radio stations in the US.

The Federal Communications Commission oversees radio transmission in the US (FCC). Various broadcasting services, including the following, have been produced under the AM broadcast band, which runs from 540 to 1700 kHz, is where radio transmission initially gained popularity in the 1920s.

To know more about radio

https://brainly.com/question/15308544
#SPJ4

A 1.5 x 103 kg car's momentum is equal to 4.5 x 104 kg m/s east if it moves at a speed of 30 m/s for 60 seconds while traveling straight east.

Momentum is a property of an object or system that describes its tendency to move or stay in motion. It is equal to the product of the mass of the object and its velocity. Momentum is conserved, meaning that the total momentum of an isolated system remains constant, regardless of any changes or interactions within the system. Momentum is an important concept in classical mechanics, and is directly related to forces, energy, and angular momentum. Momentum is an essential factor for describing the behavior of objects in motion.

To learn more momentum

https://brainly.com/question/1042017

#SPJ1

She moves at 6.5 m/s as her final speed after running 100 meters.

The velocity change of an object per unit of time is known as acceleration. Amounts of acceleration are measured in meters per second squared (m/s2), the SI unit of acceleration. For instance, due to Earth's gravity, a falling object accelerates at a rate of 9.8 m/s2.

A straight-line motion issue looks something like this. These formulas are used to determine the final velocity:

s = Vo*t + (1/2)*a*at2, and Vf = Vo + at

Where:

Vf = = final speed =?

1.4 m/s is the initial velocity, and 0.20 m/s is the acceleration.

100m displacement in 2 seconds.

the first equation is changed by:

100 = 1.4t + (1/2)*0.2*t^2\st = 25.388s

Vf = 1.4 + 0.2 can be used as a replacement in the second equation.

Vf = 6.5m/s

To know more about cardio exercise visit:-

https://brainly.com/question/1311324

#SPJ4

The same projectile needs the power to accelerate from rest to a launch speed of 2v at a time of 219.6 W.

power P = work/time

= ½mv² / t

P' = ½m(2v)²/t

= 4 * ½mv² / t

= 4 * P

so

P' = 4 * 54.9W

= 219.6 W  (or 220 W rounded off)

As a result, from the moment the projectile is hurled, through its greatest point, and until it touches the earth, its acceleration is 9.81 meters per second per second, or equal to the acceleration caused by gravity.

to know more about accelerating here:

brainly.com/question/12550364

#SPJ4

Index fossils are fossils that are used to help determine the relative age of rock layers and sedimentary strata. They are typically small, widely distributed organisms that lived for a relatively short period of time and are characteristic of a specific geological period. Index fossils are useful because they can help geologists and paleontologists to determine the relative age of rock formations and to understand the Earth's geological history.

It is unlikely that humans would be useful as index fossils in the future, as the time period during which humans have existed on Earth is relatively short compared to the age of the Earth as a whole. In addition, humans are not small, widely distributed organisms like many of the commonly used index fossils. Instead, humans are large, highly adapted organisms that have a wide range of habitats and are found on most of the continents.

However, it is possible that artifacts or other remains associated with human activity could be used as index fossils in the future. For example, the presence of certain types of tools or other materials might be used to help determine the relative age of a site or to understand the environmental conditions and human activity in a particular region at a specific point in time.

Hope This Helps You!

On gas-loaded accumulators, safety devices like relief valves, burst discs, and temperature fuse plugs are all used as  precautionary measures to maintain the efficiency​.

Accumulators are pressurized containers that can hold fluid. When a system needs a boost in power, this stored energy can be used, recharged, and then used again. The right precautions should be taken to keep pressure and temperatures under control because this stored energy can be hazardous.

On accumulators, a number of modest but crucial accessories can be placed to stop the release of this stored energy and guarantee that temperatures stay within their safe operating range.

Learn more about temperature here:

https://brainly.com/question/11464844

#SPJ1