Explain why it is difficult to remove lid from a preserving jar which was closed when the food was full of steam?

Answers

Answer 1

Answer:

As the contents cool, the pressure of the air left inside the jar falls and the metal on the lid pops downwards. The greater atmospheric pressure outside the jar keeps the metal button depressed and makes it more difficult to open the jar.

Answer 2
As it cools, the air in the space above the conserving contracts, forcing the safety button on the lid to drop. This forms a tight seal that makes the lid harder to remove. This is the seal that prevents the fear going off and is essential to give it a long shelf life.

Related Questions

Based on Newton’s 3rd Law of motion, if a baseball player hits a ball with the bat, the action force is the impact of the bat against the ball. Explain where the reaction force can be found.

Answers

Answer:

the reaction force will be found where the bat hits the ball.

Explanation:

Answer:

reaction force will be found where the bat hits the ball

Explanation:

Which of the following is an example of a valid experiment?Adding Minutes to different types of soda and recording/comparing the reaction height.Asking your friends what kind of candy they like and recording the responses.Building a baking soda volcano

Answers

Asking your friends what kind of candy they like and recording the responses.

recording answers are a valid experiment. but at the same time adding minutes to different types of soda and recording is another great idea.

Statement A is correct. Adding Minutes to different types of soda and recording/comparing the reaction height is an example of a valid experiment.

What is an experiment?

An experiment is a technique used to prove or disprove a theory, or to test the efficacy or probability of something that has never been done before.

Experiments reveal cause-and-effect relationships by illustrating what happens when a specific component is changed. Experiments have a wide range of goals and scales,

but they always rely on a repeatable technique and rational interpretation of the outcomes. Natural experimental research is also available.

Adding Minutes to different types of soda and recording/comparing the reaction height is an example of a valid experiment.

Hence statement A is correct.

To learn more about the experiment refer to the link;

https://brainly.com/question/9199868

I need help with question ii) Calculate the speed of these radio waves.
I don't know if I started it right.... I need help plss!!!

Answers

Answer:

Speed = Wavelength x Wave Frequency. In this equation, wavelength is measured in meters and frequency is measured in hertz (Hz), or number of waves per second. Therefore, wave speed is given in meters per second, which is the SI unit for speed.

help me pls i need the answer

Answers

The answer is position 3 because the water is dence and it won’t go that far
It’s either one or three

Plz help with these 4





What are the characteristics of bones? (list 7)





What role do joints play?





What are the two types of joints?






What are ligaments?

Answers

Answer:

1) The human skeleton performs six major functions: support, movement, protection, production of blood cells, storage of minerals, and endocrine regulation. protection of internal organs

2) Joints are where two bones meet. They make the skeleton flexible — without them, movement would be impossible. Joints allow our bodies to move in many ways.

3)A joint is a point where two or more bones meet. There are three main types of joints; Fibrous (immovable), Cartilaginous (partially moveable) and the Synovial (freely moveable) joint

4)A ligament is a fibrous connective tissue which attaches bone to bone, and usually serves to hold structures together and keep them stable.

Explanation:

go-gle your welcome ;)

1)
They are lightweight yet strong and hard, and serve multiple functions. Bone tissue (osseous tissue) is a hard tissue, a type of specialized connective tissue. It has a honeycomb-like matrix internally, which helps to give the bone rigidity. Bone tissue is made up of different types of bone cells.



2) Joints are functional junctions between two or more bones. Joints bind the skeleton together, to give structure and allow muscles to move bones to perform certain tasks such as running, reaching and grasping. There are many types of joints the most common of which are synovial joints



3) A joint is a point where two or more bones meet. There are three main types of joints; Fibrous (immovable), Cartilaginous (partially moveable) and the Synovial (freely moveable) joint.



4) A ligament is a fibrous connective tissue which attaches bone to bone, and usually serves to hold structures together and keep them stable.




(Hope this help a little bit)

Which of the following is not true about both scientific laws and scientific theories?

Answers

Answer:

In general, a scientific law is the description of an observed phenomenon. It doesn't explain why the phenomenon exists or what causes it. The explanation of a phenomenon is called a scientific theory. It is a misconception that theories turn into laws with enough research

Explanation:

If more waves pass a point in a given time frame, what does this mean?

A. The frequency has increased, B. The frequency has decreased, C. The speed has decreased, or D. The wavelength has increased?

Answers

Answer:

D or A

Explanation:

As Frequency's increases the Wavelength's shorten

D I think. Yesssssssss

Explain why this statement is false: "All minerals are rocks." ?

Minerals contain several types of rocks.
Rocks can be made of several minerals.
Minerals are made of elements.
Rocks are bigger than minerals.

Answers

Answer:A mineral is a naturally occurring inorganic element or compound having an orderly internal structure and characteristic chemical composition, crystal form, and physical properties. Common minerals include quartz, feldspar, mica, amphibole, olivine, and calcite.

Explanation:

Rocks can be made of several minerals

As human activities constantly change the ecosystem, scientists work to find ways to keep ecosystems healthy and intact. In what ways do humans protect and restore the ecosystem? Choose the three that apply.
A.
by providing cultural services

B.
through ecological restoration

C.
by maintaining current conditions

D.
through conservation

E.
by working toward sustainability to maintain diversity

Answers

In what ways do humans protect and restore the ecosystem? Choose the three that apply.

B. through ecological restoration

D. through conservation

E. by working toward sustainability to maintain diversity.

Determine the displacement and distance covered by a man if he walks 10 m north, turns east and walks 20m, and then turns left and walks 10 m.

Answers

His displacement is about 44.72 and he covered 40m
Answer : his displacement is 44.72 . Explanation : He displaced around 44.72 and covered 40m

I'd like some help in these two questions please, thankyou so much. have a great day! stay safe and stay happy. (there are two parts of one question so uh yea.

Answers

Answer:

The resultant force is 25 N in the negative x-direction.

Explanation:

We need to find the total force in the x and y-direction and then the resultant force will be the magnitude of the sum of Fx and Fy.

Total force in the x-direction:

[tex]F_{x}=12-37=-25\: N[/tex]

Total force in the y-direction:

[tex]F_{y}=10-10=0\: N[/tex]

Therefore, the magnitude of the resultant force will be:

[tex]F_{R}=\sqrt{F_{x}^{2}+F_{y}^{2}}[/tex]

[tex]F_{R}=\sqrt{(-25)^{2}+0}[/tex]

[tex]|F_{R}|=25\: N[/tex]

The resultant force is 25 N in the negative x-direction, in other words, the car will move to the left.

I hope it helps you!

Can you help me? Thanks! 10+ points!

Answers

Explanation:

velocity: average velocity equals Displacement /change in time.

Kinetic energy: K=1/2mv^2 (m = Mass) ( v = Velocity).

speed using the kinetic energy is also KE =1/2mv^2

(M in Kg) (V in m/s)

If u need any other help I’d help ! Honestly the person above me answered but feel free to message me if u need help ! I don’t really need the points !

The gravity of Earth is attracting a person towards the center with 500N of gravitational force. The person is exerting a reactionary force on the Earth with how much force? Explain your thinking behind this.

Answers

Answer:

I don't know.

Explanation:

A campfire could be called.

Answers

Answer:

a fire at campsite that provides light and warmth.

[]Answer the question below[]

Answers

Answer:

The answer is D. density.

An model leans off a bridge railing to take a picture and accidentally drops their phone. The phone's mass is 0.115 kg and the bridge is 15 m tall. The instant the model dropped the phone, it's mechanical energy is 16.9 joules? why?

Answers

Answer:

The statement is true:

Explanation:

As said in the statement, we need to measure the mechanical energy(M.E) of the phone at the instant is dropped:

M.E = P.E + K.E

Given the fall hasn't yet begun, the kinetic energy (K.E) is equal to zero so M.E = P.E

We must use the Potential Energy formula :

P.E = h x m x g

We know that g is equal to 9.8 [tex]J.kg^{-1} .m^{-1}[/tex] on Earth, the height is 15m and m is 0.115:

M.E = 15 x 0.115 x 9.8 = 16.9 Joules

Which of the following statements is true regarding the constructive interference diagram shown below? Select all that apply.

A. The amplitude of the wave is increased.

B. During interference, the wave will produce a louder sound.

C. The amplitude of the wave is decreased.

D. The crests of two waves are overlapping.

E. The troughs of the two waves are overlapping.
There is more than one answer. Help plz

Answers

The answer is d because u can see they are over lapping

The statement i.e. true with respect to the constructive interference diagram should be that the two waves should be overlapped.

What is the constructive interference?

At the time when two waves of the same kind of wavelength should be in phase so they created the new wave along with the amplitude that should be equivalent to the sum of the inidvidual amplitudes so this we called as the constructive interference

As per the given diagram, we can say that the crest for two waves that should be overlapped should be considered.

Learn more about wave here: https://brainly.com/question/22157656

The hardest mineral known to people is:

slate
granite
diamond
quartz

Answers

Answer:

The hardest mineral known to people is Diamond

Diamond is the hardest

During an experiment, a scientist places a heat lamp above a bowl of water and uses the lamp to heat up the water. How does heat transfer from the lamp to the water?
Conduction
Convection
Radiation
None of the above

sorry i dont know what subject to put

Answers

Answer:

radiation

Explanation:

radiation since its not directly in contact with it, it’s using it’s heat waves to warm it it

Which technological advancement made the Pony Express unnecessary?
Steamships
Cotton Gin
Telegraph
Steel Plow

Answers

Telegraph! Because telegraphs were used to communicate and to (at that time) send messages rapidly.

Answer: Option (C) is correct, Telegraph

Explanation: Hope it helps!

Good luck!!!

Scientists have sent an unmanned space vehicle to Mars to investigate the properties of the planet. Mars' gravitational field is 38% the strength of Earth's gravitational field. How will the weight and mass of the vehicle change on Mars?
A) The mass will increase, the weight will increase
B) The mass will decrease, the weight will decrease
C) The mass will remain the same, the weight will decrease
D) The mass will increase, the weight will remain the same

Answers

C because the mass doesn't change, the vehicle doesn't shrink, but the weight decreases.

An auto company technician is trying to relate a car’s damage in a crash test to the kinetic energy of the car on impact. In addition to the mass of the car, what ratio will the technician need in order to determine to complete his study? The ratio of time to speed, weight to mass, distance to time, or acceleration to speed. Explain why.

Answers

Answer:

????????????????

Explanation:

????????

PLEASE HELP ASAP
Describe the structure of the inner core? The inner core is made of no solid rocks. The inner core is made of liquid metal. The inner core contains melted rocks. The inner core is made of solid iron and nickel.

Answers

The inner core is made up of the heaviest metals, like iron and nickel. The inner core is solid, but the outer core is liquid.

Answer:

The inner core is a hot, dense ball of (mostly) iron. It has a radius of about 1,220 kilometers (758 miles). Temperature in the inner core is about 5,200° Celsius (9,392° Fahrenheit). The pressure is nearly 3.6 million atmosphere (atm)

Based on Newton’s 3rd Law of motion, if an archer shoots an arrow at the target, the action force is the bowstring against the arrow. Explain where the reaction force can be found.

Answers

Answer:

maybe target, not sure.

If two waves interact in destructive interference, which of the following will be true regarding the new wave formed?

A. The new wave will produce a lower-pitched sound than the two original waves.

B. The new wave will produce a quieter sound than the two original waves.

C. The new wave will produce a higher-pitched sound than the two original waves.

D. The new wave will produce a louder sound than the two original waves.
Help plz

Answers

Answer:

b

Explanation:

The guy above is correct, it is B :)

A glass rod is rubbed briefly with silk and the rod becomes able to attract and lift a number of small pieces of paper. If the rod is rubbed with silk for a longer period of time, explain what will happen and why.
QUICKLY PLEASE!

Answers

Answer:

it will have a stronger attraction force

Explanation:

If the rod is rubbed with silk for a longer period of time, then it attract large  number of small pieces of paper.

When A glass rod is rubbed briefly with silk, then glass rod is heated because of rod become positively charged. That  positively charged glass rod attracts the uncharged pieces of paper because some of the electrons present in the paper accumulate at the end near the rod.

Learn more:

https://brainly.com/question/13822373

what are two roles of bacteria in a nitrogen cycle

Answers

Answer:Nitrogen-fixing bacteria convert free nitrogen gas into nitrogen compounds. ... Bacterias that are decomposers recycle nitrogen compounds in the soil by breaking down animal wastes and dead plants and animals. 3. Other bacteria break down nitrogen compounds and release free nitrogen back into the air.

Explanation:

"The nitrogen fixing and bacteria of decay" is the two major role of bacteria in nitrogen cycle."

What is nitrogen fixing?

Nitrogen fixing can be define as the process in which It is possible to see nitrogen converting to nitrate.

What is bacteria of decay?

Bacteria of decay can be define as the process in which it is possible to see nitrogen waste converting to ammonia.

What is nitrogen?

Nitrogen can be referred as element which is kept in boron family in the periodic table.

Therefore, the two role of bacteria in a nitrogen cycle is bacteria of decay and nitrogen fixing.

To know more about nitrogen fixing click here.

https://brainly.com/question/1615727.

#SPJ2

for can anybody help me today

Answers

Answer:

hey tyler

Explanation:

Hello Tyler how’s your day :)

Energy can't be created or destroyed - Law of Conservation of Energy.

If this is true, where does the mechanical energy go when skateboarding? Eventually the skateboarder will slow down and stop if she doesn't add more mechanical energy by pushing. Choose the most correct statement below.

Energy isn't conserved and actually gets used up.

Mechanical Energy converts into potential energy and then she stops.

Mechanical Energy gets converted into thermal energy through friction.

explain your answer

Answers

Answer: Mechanical Energy gets converted into thermal energy through friction

Explanation: when the skateboard is rubbing against whatever it’s rolling on it creates friction which slows down the skateboard, the mechanical energy is then converted into thermal energy. If you’ve ever touched the bottom of a wheel after going fast it typically feels a little warm.

Hope this helped

The mechanical energy gets converted into thermal energy through friction, it’s a form of kinetic energy.

Based on Newton’s 3rd Law of motion, if an archer shoots an arrow at the target, the action force is the bowstring against the arrow. Explain where the reaction force can be found.

Answers

Answer:

the reaction force is the arrows push  against the bow sting

Explanation:

the two objects must react the same , bowstring and arrow.

Answer:

the reaction force is the arrows push  against the bow sting

the two objects must react the same , bowstring and arrow.

Other Questions
Debt to assets ratio - Total liabilities / Total assets ABC Company reported the following debt to assets ratio over the past 3 years: 2021 2020 2019 34% 39% Which of the following statements about the ABC Company's 2021 debt to assets ratio is false? a. Creditors would likely view the trend as positive. b. 66% of the company's assets were financed by the owners. c. 34% of the company's assets were financed by creditors. d. the firm's long-term debt-paying ability is deteriorating 37% 3 different list 5 numbers in each list which have a mean of 7 Molson Coors Brewing Company is the world's fifth largest brewer. In the United States, its tie to the magical appeal of the Rocky Mountains is one of its most powerful trademarks. Some of the items included in its recent annual consolidated statement of cash flows presented using the indirect method are listed here. Indicate whether each item is disclosed in the Operating Activities, Investing Activities, or Financing Activities section of the statement or use Not Applicable if the item does not appear on the statement. (Note: This is the exact wording used on the actual statement.) 1. Purchase of stock. [This involves repurchase of the company's own stock.] 2. Principal payment on long-term debt. 3. Proceeds from sale of properties. 4. Inventories (decrease). 5. Accounts payable (decrease). 6. Depreciation and amortization. What's most important for managing high yield bonds? a. Manage interest rate duration b. Manage credit exposure c. Manage convexity Rocket mortgage House cost:434,900We will offer you a compounded annually loan,rate of 2. 625%,with a 10% deposit Length of mortgage 20 yearsLength of mortgage 30 yearsNeed answer ASAP what new instrument was developed in the nineteenth century? group of answer choices a. bassoon b. bugle c. saxophone d. english horn If climate change increases the intensity and duration of storm precipitation and subsequent runoff (but not sediment) in a watershed, what is likely to happen to the watersheds streams over time?a.Nothingb. The channels will fill up with sediment in response to the larger and more frequent flood flowsc.The channels will increase their slopes, adding even more energy to the systemd.The channels will adjust their base levels to quickly stop any adjustmentse.The channels will erode in response to the larger and more frequent flood flows what would you click to only see overdue tasks on your worklist All of the following are bodily processes that affect drugs, EXCEPT ________.a. absorptionb. distributionc. metabolismd. cognition What is the energy of light with a wavelength of 589 nm? (The speed of lightin a vacuum is 3.00 108 m/s, and Planck's constant is 6.626 10-34 J.s.) Who overturned a treaty signed by the Creek Nation in 1825 that cededits remaining land to the state of Georgia? Halla las rectas de interseccion del 1 y 2 bisector con el plano alfa (-25,10,-25). What can you conclude from the fact the spectators accompanied Union troops to Bull Run the watch the battle and were in a festive mood? why are small populations vulnerable to extinction? a. genetic drift b. demographic stochasticityc. environmental stochasticity d. all of the above aadocument.createTextNode(text)Which of the following methods creates a node containing the text string text? How do the cellular proteins function (and coordinate) to accurately permit cell division? Describe at least one protein and its associated functions Standards Standard retention time of dichloromethane solvent: 2.25 min Standard retention time of toluene: 12.17min Standard retention time of cyclohexene: 5.74min (0.25pts) Standard retention time of dichloromethane solvent (min) (0.25pts) Standard retention time of toluene (min) (0.25pts) Standard retention time of cyclohexane (min) Analysis of Cyclohexane Distillate Retention time of cyclohexane: Area for the cyclohexane peak: Retention time of toluene: Area for the toluene peak: (0.25pts) Your retention time of cyclohexane (min) (0.25pts) Area for the cyclohexane peak (cm2) (0.25pts) Your retention time of toluene (min) (0.25pts) Area for the toluene peak (cm2) (2pts) Percent composition of cyclohexane (\%) (2pts) Percent composition of toluene contaminant (\%) To calculate how many grams NH3 will be formed from 6. 0 g H2, the first step you needA) information about chemical reaction is balanced or not. B) set up given mole ratio of reactant vs products. C) information about the mass of N2 reacting. D) Set up mole ratios of reactants vs products from balanced chemical equation. N2 + H2 NH3 Identify the type of variance defined by the following formula: (Actual Price - Standard Price) Actual Quantity. O Quantity variance O Price variance O Cost variance: 2) buying a dilapidated house that is unclean for living standards and restoring it to the house it was 50 years ago in order to sell it again is an example of