Answer:
You can do it maybe ask you teacher for help! thats always okay!
Step-by-step explanation:
It is required to image one slice positioned at 5cm with a thickness of 1cm, of a cube in the first octant having width 10cm and one of its corners at the origin. The z-gradient is given by Gz=1G/mm. a. Find the bandwidth (in Hz) of the RF waveform needed to perform the slice selection. b. Give a mathematical expression for the RF waveform B1(t) (in the rotating frame) that is needed to perform the slice selection.
a. The bandwidth (in Hz) of the RF waveform needed to perform the slice selection is 1 kHz.
b. A mathematical expression for the RF waveform B1(t) (in the rotating frame) that is needed to perform the slice selection is:
B1(t) = B1max * sin(2π * γ * Gz * z * t)
where:
B1max is the amplitude of the RF pulse, in tesla (T)
γ is the gyromagnetic ratio, which is a fundamental constant for each type of nucleus (for protons in water at 1.5T, γ = 42.58 MHz/T)
Gz is the strength of the z-gradient, in tesla per meter (T/m)
z is the position along the z-axis, in meters (m)
t is the time, in seconds (s)
a. The bandwidth of the RF waveform is determined by the thickness of the slice that we want to image. In this case, the slice has a thickness of 1 cm, which corresponds to a range of z values of 5 cm ± 0.5 cm. The frequency range required to cover this range of z values is given by the Larmor equation:
Δf = γ * Gz * Δz
where Δf is the frequency range, in Hz, and Δz is the range of z values, in meters. Substituting the values, we get:
Δf = 42.58 MHz/T * 1 T/m * 0.01 m = 1.058 kHz
However, this frequency range covers both the excitation and dephasing of the slice, so the bandwidth of the RF waveform needed to perform the slice selection is half of this value, which is 1 kHz.
b. The RF waveform B1(t) is given by the expression:
B1(t) = B1max * cos(2π * (fo + γ * Gz * z) * t + φ)
where:
fo is the resonant frequency of the spins in the absence of any magnetic field gradient, which is equal to the Larmor frequency, given by fo = γ * Bo
Bo is the strength of the main magnetic field, in tesla (T)
φ is the phase of the RF pulse, which is usually set to 0 for simplicity
To select the slice at z = 5 cm, we need to apply an RF pulse that has a resonant frequency equal to the Larmor frequency at that position, which is given by:
fo' = γ * Gz * z + fo
Substituting the values, we get:
fo' = 42.58 MHz/T * 1 T/m * 0.05 m + 42.58 MHz/T * 1.5 T = 44.947 MHz
The amplitude of the RF pulse, B1max, is usually set to a value that ensures that the flip angle of the spins is close to 90 degrees. In this case, we will assume that B1max is equal to 1 microtesla (μT). Therefore, the final expression for the RF waveform B1(t) is:
B1(t) = 1 μT * cos(2π * 44.947 MHz * t)
To express the RF waveform in the rotating frame, we need to rotate the coordinate system around the y-axis by an angle equal to the Larmor frequency, given by:
B1rot(t) = B1(t) * exp(-i * 2π * fo * t)
Substituting the values, we get:
B1rot(t) = 1 μ
To know more about expression, visit;
https://brainly.com/question/1859113
#SPJ11
Consider the following estimated trend models. Use them to make a forecast for t = 21. Linear Trend: yˆy^ = 13.54 + 1.08t (Round intermediate calculations to at least 4 decimal places and final answer to 2 decimal places.)
The forecast for t = 21 using the linear trend model is approximately y^ = 36.22
To forecast the value for t = 21 using the provided linear trend model. The linear trend model given is:
y^ = 13.54 + 1.08t
To make a forecast for t = 21, we'll plug in the value of t into the equation and solve for y^:
Insert the value of t into the equation:
y^ = 13.54 + 1.08(21)
Perform the multiplication:
y^ = 13.54 + 22.68
Add the numbers together:
y^ = 36.22
Therefore, the forecast for t = 21 using the linear trend model is approximately y^ = 36.22 (rounded to 2 decimal places).
Learn more about "model ":
https://brainly.com/question/28592940
#SPJ11
12. Given that the coefficient of x² in the expansion of (1-ax)' is 60 and that a > 0, find the value of a.
Let V be a vector space v,u in V and let T1:V->V and T2 be a linear transformation such that T1(v)=2v-7u,T1(u)=-6v+3u, T2(v)=4v+2u, and T2(u)=-7u-4u.
Find the images of v and u under the composite of T1 and T2
(T2T1)(v)=________
(T2T1)(u)=________
To find the images of v and u under the composite transformation (T2T1), we need to apply the linear transformations T1 and T2 in sequence.
Let's start by calculating (T1(v)):
T1(v) = 2v - 7u
Next, we apply T2 to the result:
T2(T1(v)) = T2(2v - 7u)
Using the given values for T2, we substitute v and u:
T2(T1(v)) = T2(2v - 7u) = 2(2v - 7u) + 2(-6v + 3u)
Simplifying further:
T2(T1(v)) = 4v - 14u - 12v + 6u
Combining like terms:
T2(T1(v)) = -8v - 8u
Therefore, the image of v under the composite transformation (T2T1) is -8v - 8u.
Similarly, let's calculate (T1(u)):
T1(u) = -6v + 3u
Now we apply T2 to the result:
T2(T1(u)) = T2(-6v + 3u) = 4(-6v + 3u) + 2(-7u - 4u)
Simplifying further:
T2(T1(u)) = -24v + 12u - 14u - 8u
Combining like terms:
T2(T1(u)) = -24v - 10u
Therefore, the image of u under the composite transformation (T2T1) is -24v - 10u.
In summary:
(T2T1)(v) = -8v - 8u
(T2T1)(u) = -24v - 10u
Learn more about Composite Transformation :
https://brainly.com/question/10465236
#SPJ11
what is 2 + x ≤ 3x – 6 ≤ 12
Answer:
4≤x≤6
Hope that helps! :)
Use Lagrange multipliers to find the maximum and minimum values of f(x, y, z) = xyz subject to the constraint x2 + y2 + z2 = 3. Maximum = Minimum =
The maximum and minimum values of f(x, y, z) = xyz subject to the constraint x^2 + y^2 + z^2 = 3 are 1 and -1.
To find the maximum and minimum values of f(x, y, z) = xyz subject to the constraint x^2 + y^2 + z^2 = 3, we can use the method of Lagrange multipliers.
Define the Lagrangian function L(x, y, z, λ) as follows:
L(x, y, z, λ) = xyz - λ(x^2 + y^2 + z^2 - 3)
Take partial derivatives of L with respect to x, y, z, and λ, and set them equal to 0:
∂L/∂x = yz - 2λx = 0
∂L/∂y = xz - 2λy = 0
∂L/∂z = xy - 2λz = 0
∂L/∂λ = -(x^2 + y^2 + z^2 - 3) = 0
Solve the system of equations formed by the partial derivatives to find the critical points.
From the first equation, we have yz = 2λx. Similarly, from the second and third equations, we have xz = 2λy and xy = 2λz.
Multiplying these equations together, we get:
xyz^2 = (2λx)(2λy)(2λz) = 8λ^3xyz
Since xyz ≠ 0 (as the constraint implies x, y, and z are not all zero), we can divide both sides by xyz to get:
z = 8λ^3
Similarly, we can find that x = 8λ^3 and y = 8λ^3.
Substituting these values into the constraint x^2 + y^2 + z^2 = 3, we get:
(8λ^3)^2 + (8λ^3)^2 + (8λ^3)^2 = 3
192λ^6 = 3
λ^6 = 3/192
λ^6 = 1/64
Taking the sixth root of both sides, we find:
λ = ±1/2
Substitute the values of λ into the equations x = 8λ^3, y = 8λ^3, and z = 8λ^3 to find the critical points.
For λ = 1/2:
x = 8(1/2)^3 = 1
y = 8(1/2)^3 = 1
z = 8(1/2)^3 = 1
For λ = -1/2:
x = 8(-1/2)^3 = -1
y = 8(-1/2)^3 = -1
z = 8(-1/2)^3 = -1
Evaluate the function f(x, y, z) = xyz at the critical points to find the maximum and minimum values.
For the critical point (1, 1, 1):
f(1, 1, 1) = 1 * 1 * 1 = 1
For the critical point (-1, -1, -1):
f(-1, -1, -1) = -1 * -1 * -1 = -1
Therefore, the maximum and minimum values of f(x, y, z)
For more questions like Equation click the link below:
https://brainly.com/question/29657983
#SPJ11
A variable weight has been defined as an integer. Create a new variable p2weight containing the address of weight. C language.
The pointer variable p2weight to access and manipulate the value of weight indirectly.
In C language, we can create a new pointer variable p2weight of type int* to store the address of an integer variable weight using the "&" operator, as follows:
int weight; // integer variable
int* p2weight = &weight; // pointer variable storing
Here, the "&" operator is used to obtain the address of the variable weight, and then the pointer variable p2weight is initialized to store this address. Now, we can use the pointer variable p2weight to access and manipulate the value of weight indirectly.
Learn more about pointer variable here
https://brainly.com/question/30358642
#SPJ11
a sphere has a radius of 6 units. if the radius is tripled, by what factor does the volume increase?
Answer:
Original volume = (4/3)π(6^3) = 288π
New volume = (4/3)π(18^3) = 7,776π
7,776π ÷ 28π = 27
When the radius of a sphere is tripled, the volume of the new sphere is 27 times the volume of the old sphere.
1. consider the differential equation 2x2 d2y dx2 3x dy dx = y. using substitution, verify that y = √x is a solution to this differential equation.
Therefore, To verify that y = √x is a solution to the given differential equation, we substituted y = √x and its derivatives and simplified it to show that it satisfies the equation for all x > 0.
To verify that y = √x is a solution to the given differential equation, we need to substitute y = √x into the equation and see if it satisfies the equation.
First, we need to find the first and second derivatives of y with respect to x:
dy/dx = 1/(2√x) and d²y/dx² = -1/(4x^(3/2)).
Now, substitute these values of y, dy/dx, and d²y/dx² into the given differential equation:
2x²(-1/(4x^(3/2))) + 3x(1/(2√x)) = √x
This simplifies to: -1/(2x^(1/2)) + 3/(2x^(1/2)) = √x
Which is true for all x > 0.
Explanation:
To verify that a given function is a solution to a differential equation, we substitute the function and its derivatives into the equation and check if it satisfies the equation. In this case, we used the given differential equation, substituted y = √x and its derivatives, and simplified to show that it indeed satisfies the equation for all x > 0.
Therefore, To verify that y = √x is a solution to the given differential equation, we substituted y = √x and its derivatives and simplified to show that it satisfies the equation for all x > 0.
To know more about equations visit:
https://brainly.com/question/22688504
#SPJ11
(figure: labor supply curve) based on the graph, we see that this person is willing to supply _____ hours of labor at wage rate w1 than at w2 and _____ hours of labor at wage rate w3 than at w2.
The person is willing to supply fewer hours of labor at wage rate w1 than at w2 and more hours of labor at wage rate w3 than at w2.
What is fewer hours (w1)?
"Fewer hours (w1)" refers to a condition where an individual is willing to offer a reduced amount or a lesser number of hours of labor in response to a specific wage rate denoted as w1. It implies a decrease in the quantity of labor supplied relative to other wage rates, such as w2 or w3.
Typically, the labor supply curve has an upward slope, indicating that as the wage rate increases, individuals are more willing to supply labor or work more hours. This is because higher wages incentivize individuals to allocate more of their time to work in order to earn more income.
Therefore, if we assume a conventional labor supply curve, we can infer that at a higher wage rate (w3) compared to a lower wage rate (w2), the individual would be willing to supply more hours of labor. Conversely, at a lower wage rate (w1) compared to w2, the individual would be willing to supply fewer hours of labor.
It is important to note that the actual relationship between wage rates and labor supply can be influenced by various factors such as individual preferences, market conditions, and other economic factors. Therefore, a specific labor supply curve graph or more information would be needed to provide a more accurate and specific explanation.
To know more about fewer hours (w1) visit:
https://brainly.com/question/29475509
#SPJ4
The value of a car that depreciates over time can be modeled by the function r(t)=16000(0.7)^{3t 2}.r(t)=16000(0.7) 3t 2 . write an equivalent function of the form r(t)=ab^t.r(t)=ab t .
The value of a and b from the given function and the equivalent function are 7840 and 0.343 respectively.
The given function is [tex]R(t)=16000(0.7)^{3t+2}[/tex].
Here, the given function can be written as
[tex]R(t) = 16000\times(0.7)^{3t}\times(0.7)^2[/tex]
[tex]R(t) = 16000\times(0.7)^{3t}\times0.49[/tex]
[tex]R(t) = 7840\times(0.7)^{3t}[/tex]
[tex]R(t) = 7840\times(0.343)^{t}[/tex]
The given equivalent function is [tex]R(t) = ab^{3t}[/tex]
By comparing [tex]R(t) = 7840\times(0.343)^{t}[/tex] with [tex]R(t) = ab^{3t}[/tex], we get
a=7840 and b=0.343
Therefore, the value of a and b from the given function and the equivalent function are 7840 and 0.343 respectively.
To learn more about the function visit:
https://brainly.com/question/28303908.
#SPJ12
• problem 7: if you keep on tossing a fair coin, what is the expected number of tosses such that you can have hth (heads, tails, heads) in a row?
The expected number of tosses needed to obtain hth in a row is h^2/2. For example, the expected number of tosses needed to obtain HTH in a row is 4^2/2 = 8.
Let E be the expected number of tosses needed to obtain hth in a row. We can approach this problem recursively by considering the expected number of additional tosses needed given the outcome of the previous toss.
If the previous toss was tails, then we are back to the starting point and need E tosses to obtain hth in a row.
If the previous toss was heads, then we need to obtain h-1 more heads in a row to complete the hth sequence. The expected number of additional tosses needed to obtain h-1 heads in a row is E, by the same reasoning as above. In addition, we need one more toss to obtain the next head in the hth sequence.
Thus, we have the recurrence relation E = 1/2(E+1) + 1/2(E+h), which simplifies to E = E/2 + (h/2) + 1/2. Solving for E, we obtain E = h^2/2.
For such more questions on Tosses:
https://brainly.com/question/28718651
#SPJ11
The sum of 3 and four times a number.
That sentence translates to 3+4x where x is the unknown number.
The term "sum" refers to "the result of adding". The 4x means 4*x or "4 times x". Other letters can be used as the variable.
Factor completely 3x2 5x 1. (3x 1)(x 1) (3x 5)(x 1) (3x − 5)(x 1) Prime.
The expression 3x² + 5x + 1 can be factored completely as (3x + 1)(x + 1).Explanation:We are given an expression 3x² + 5x + 1.
To factor this expression, we need to look for two factors such that when they are multiplied, we get 3x² + 5x + 1.
For this, we need to find two numbers whose product is 3 and whose sum is 5.
It can be observed that 3 and 1 are two such numbers. Therefore, we can write:3x² + 5x + 1 = (3x + 1)(x + 1)
Hence, the expression 3x² + 5x + 1 can be factored completely as (3x + 1)(x + 1).
To know more about factors visit :-
https://brainly.com/question/25829061
#SPJ11
find the missing value of y that makes the equation y=2/3x-4 true when x=9
Answer: true when x = 9 is y = 2.
Step-by-step explanation:
To find the missing value of y that makes the equation y = (2/3)x - 4 true when x = 9, we substitute x = 9 into the equation and solve for y.
Substituting x = 9 into the equation:
y = (2/3)(9) - 4
Simplifying the equation:
y = 6 - 4
y = 2
Therefore, the missing value of y that makes the equation true when x = 9 is y = 2.
Mr.salazar is setting up some fish tanks he wants to have between 23 and 29 use either 3 or 4 fish tanks and put the same number of fish in each tank, what are two ways mr Salazar can set up fish tanks
Two possible ways could be having 23 fishes in 3 tanks each having 8,8and 7 fishes respectively and having 4 tanks with 6,6,6 and 4 fishes respectively
Finding possible combinationsTo find two ways Mr. Salazar can set up fish tanks with the same number of fish in each tank, using either 3 or 4 fish tanks, within the range of 23 to 29, we can try different combinations. Here are two possible setups:
Setup 1:
Number of fish tanks: 3
Number of fish in each tank: 8
With this setup, Fish distribution in the tanks could be as follows :
Tank 1: 8 fish
Tank 2: 8 fish
Tank 3: 7 fish
Total number of fish: 8 + 8 + 7 = 23
Another possible Option could be :
Setup 2:
Number of fish tanks: 4
Number of fish in each tank: 6
Fish distribution in the tank could be as follows:
Tank 1: 6 fish
Tank 2: 6 fish
Tank 3: 6 fish
Tank 4: 5 fish
Total number of fish: 6 + 6 + 6 + 5 = 23
These are two possible setups that satisfy the fish set up conditions given in the question.
Learn more on combination ;https://brainly.com/question/4658834
#SPJ1
find the net signed area between the curve of the function f(x)=2x 4 and the x-axis over the interval [−7,3]. do not include any units in your answer
The net signed area is -4316.
To find the net signed area between the curve of the function f(x) = 2x^4 and the x-axis over the interval [-7,3], we need to split the interval into two parts, one for negative values of x and one for positive values of x, since the function changes sign at x = 0.
For x ≤ 0, the curve lies below the x-axis, so the net signed area is the negative of the area under the curve. We can find the area using the definite integral:
∫[from -7 to 0] 2x^4 dx
= [2/5 * x^5] [from -7 to 0]
= -2/5 * 7^5
= -4802
For x ≥ 0, the curve lies above the x-axis, so the net signed area is the same as the area under the curve. We can find the area using the definite integral:
∫[from 0 to 3] 2x^4 dx
= [2/5 * x^5] [from 0 to 3]
= 2/5 * 3^5
= 486
Therefore, the net signed area between the curve of the function f(x) = 2x^4 and the x-axis over the interval [-7,3] is:
-4802 + 486 = -4316
So the net signed area is -4316.
To know more about definite integral refer here:
https://brainly.com/question/29974649
#SPJ11
A university is comparing the grade point averages of theater majors with the grade point averages of for each sample are shown in the table. In this case, assume that the sample standard deviation is equal to the population standard deviation Sample Mean 3.22 3.24 Sample Standard Deviation 0.002 0.08 Theater Majors History Majors The university wants to test whether there is a significant difference in GPAs for students in the two majors. What is the P-value and conclusion at a significance level of 0.05? 1 point) The P-value is 0.0386. Reject the null hypothesis that there is no difference in the GPAs The P-value is 0.0772. Fail to reject the null hypothesis that there is no difference in the GPAS The P-value is 0.0386. Fail to reject the null hypothesis that there is no difference in the GPAs The P-value is 0.0772. Reject the null hypothesis that there is no difference in the GPAs.
Thus, The P-value is 0.0386. Reject the null hypothesis that there is no difference in the GPAs.
Based on the given information, the university is comparing the grade point averages of theater majors with the grade point averages of history majors.
The sample mean for theater majors is 3.22 with a sample standard deviation of 0.002, and the sample mean for history majors is 3.24 with a sample standard deviation of 0.08. The university wants to test whether there is a significant difference in GPAs for students in the two majors, at a significance level of 0.05.Know more about the null hypothesis
https://brainly.com/question/4436370
#SPJ11
Case Study 12 Demand for regular daily admission tickets to the same theme park, based on average daily attendance, is given by D(p) = -7.7p2 + 495.8p + 10,000, where the regular admission price is Sp and D is the number of tickets demanded at that price. 5. The current regular daily admission price is $85. At this price, what is the elasticity of demand for tickets? Round to 3 decimal places. 6. Is the demand for tickets elastic or inelastic? Explain the meaning of your answer in the context of this problem. 7. Is revenue increasing or decreasing? 8. The park's Board of Directors is also considering raising the price of the regular daily admission ticket in 2023. Based on elasticity of demand, should they consider the increase? Explain your reasoning.
Previous question
Board of Directors should not consider raising the price
The elasticity of demand for tickets at the current regular daily admission price of $85 can be calculated using the formula:
Elasticity = (% change in quantity demanded) / (% change in price)
First, we need to find the quantity demanded at the current price. Using the demand function, D(p) = -7.7p^2 + 495.8p + 10,000:
D(85) = -7.7(85)^2 + 495.8(85) + 10,000 ≈ 6,724.5 tickets
Next, we find the derivative of the demand function with respect to price to calculate the rate of change:
dD(p)/dp = -15.4p + 495.8
At the price of $85, the rate of change is:
-15.4(85) + 495.8 ≈ -821.2
Now, we can calculate the elasticity of demand:
Elasticity = (-821.2/6,724.5) / (1/85) ≈ -1.569
Rounded to 3 decimal places, the elasticity of demand is -1.569. Since the elasticity is less than -1, the demand for tickets is elastic, meaning that a percentage increase in price will result in a larger percentage decrease in quantity demanded.
Given the elasticity of demand, if the price is increased, the revenue is expected to decrease, as fewer people will purchase tickets at the higher price. Therefore, based on the elasticity of demand, the Board of Directors should not consider raising the price of the regular daily admission ticket in 2023.
Learn more about elasticity here:
https://brainly.com/question/28790459
#SPJ11
Ricardo plans to pay for college by using his savings along with his scholarships, grants, and work-study programs. Which source of funding does Ricardo have the greatest amount of personal control over?
saving
scholarships
grants
work-study programs.
Ricardo has the greatest amount of personal control over his savings. So, correct option is A.
Savings refer to the money he has already set aside or accumulated for college. He has complete control over how much he saves and how he spends it.
Scholarships, grants, and work-study programs are external sources of funding that Ricardo can apply for and receive, but he may not have complete control over the amount of money he receives.
Scholarships and grants are typically awarded based on academic achievement, financial need, or other criteria that are beyond his control. Work-study programs may limit the number of hours he can work or the type of work he can do, and the amount of money he can earn may also be limited.
In contrast, Ricardo can decide how much money he wants to save for college and how he wants to allocate that money towards his expenses. He can also choose to invest his savings in a way that can earn interest or returns, which can help him maximize his savings. Therefore, his personal control over his savings gives him the most flexibility and independence in paying for his college expenses.
So, correct option is A.
To learn more about funding click on,
https://brainly.com/question/27195228
#SPJ1
the green's function for solving the initial value problem x^2y''-2xy' + 2y = x ln x, y(1)=1,y'(1)=0 isa. G(x,t) = x(x+t)/tb. G(x, t) = (x - t)/t c. G (x,t) = x² (x-t) d. G (x,t) = x (x-t)e. G (x,t) = - x(x-t)/t
The green's function for solving the initial value problem isG(x,t) = x(x+t)/t. The correct answer is a
To determine the Green's function for the given initial value problem, we need to find a function G(x, t) that satisfies the following properties:
G(x, t) is a solution of the homogeneous differential equation: x^2y'' - 2xy' + 2y = 0.
G(x, t) satisfies the boundary conditions: y(1) = 1 and y'(1) = 0.
G(x, t) satisfies the inhomogeneous term: x ln(x).
Among the given options, the correct Green's function for this initial value problem is (A) G(x, t) = x(x + t)/t.
To verify this, we can substitute G(x, t) into the differential equation and the boundary conditions:
Substituting G(x, t) = x(x + t)/t into the differential equation:
x^2(G''(x, t)) - 2x(G'(x, t)) + 2G(x, t) = x ln(x)
Simplifying the equation will show that it satisfies the differential equation.
Substituting G(x, t) = x(x + t)/t into the boundary conditions:
G(1, t) = 1, G'(1, t) = 0
Evaluating G(1, t) and G'(1, t) will satisfy the given boundary conditions.
Therefore, the correct answer is (A) G(x, t) = x(x + t)/t.
To learn more about differential equation from the given link
brainly.com/question/28099315
#SPJ11
Write an equation of the line that passes through (-9,-5) and is perpendicular to the line y=9/2x+2
Answer:
y = -2/9x - 7
Step-by-step explanation:
The slopes of perpendicular lines are negative reciprocals of each other, as shown by the formula m2 = -1/m1, where
m2 is the slope of the line we're trying to find,and m1 is the slope of the line we're givenThe line y = 9/2x + 2 is in slope-intercept form (y = mx + b), where
m is the slope,and b is the y-interceptStep 1: Thus, our m1 value (the slope of the given line) is 9/2 and we can plug it into the perpendicular slope formula to find m1 (the slope of the line we're trying to find):
m2 = -1 / (9/2)
m2 = -1 * 2/9
m2 = -2/9
Thus, the slope of the second line is -2/9.
Step 2: We can find b, the y-intercept of the second line by using the slope-intercept form and plugging in (-9, -5) for x and y and -2/9 for m:
-5 =-2/9(-9) + b
-5 = 18/9 + b
-5 = 2 + b
-7 = b
Thus, the y-intercept of the second line is -7
Thus, the equation of the line that passes through (-9, -5) and is perpendicular to the line y = 9/2x + 2 is y = -2/9x - 7
The length of a rectangle is 19 centimeters less than its width. Its area is 20 square centimeters. Find the dimensions of the rectangle.
The dimensions of the rectangle are width = 20 centimeters and length = 1 centimeter.
Let's denote the width of the rectangle as "w" centimeters. According to the problem, the length of the rectangle is 19 centimeters less than its width, so the length can be expressed as "w - 19" centimeters.
The formula for the area of a rectangle is length multiplied by width. In this case, the area is given as 20 square centimeter
Area = Length × Width
20 = (w - 19) × w
To solve this equation, we can expand it:
20 = [tex]w^2[/tex] - 19w
Rearranging the equation to bring everything to one side:
[tex]w^2[/tex] - 19w - 20 = 0
Now, we can factor the quadratic equation:
(w - 20)(w + 1) = 0
Setting each factor equal to zero and solving for "w":
w - 20 = 0 --> w = 20
w + 1 = 0 --> w = -1
Since a negative width doesn't make sense in this context, we discard w = -1.
Therefore, the width of the rectangle is 20 centimeters (w = 20).
To find the length, we substitute this value back into the expression for length:
Length = w - 19
Length = 20 - 19
Length = 1 centimeter
So, the dimensions of the rectangle are width = 20 centimeters and length = 1 centimeter.
for such more question on dimensions
https://brainly.com/question/13847072
#SPJ11
If dan walks twelve miles to his backyard how long is his house
Answer:
24 miles
Step-by-step explanation:
0.5 --- 12
x2 x2
1 --- 24
The Ferris wheel below has a diameter of 64 feet
and is the bottom of the wheel is 15 feet off the
ground. The Ferris Wheel takes 60 seconds to
complete a full rotation.
How high is it from the top of the Ferris wheel to the ground?
The height from the top of the Ferris wheel to the ground is 154.06 feet.
The Ferris wheel has a diameter of 64 feet and the bottom of the wheel is 15 feet off the ground.
The Ferris Wheel takes 60 seconds to complete a full rotation.
The radius of the Ferris wheel is = diameter/2
= 64/2
= 32 feet.
The bottom of the Ferris wheel is 15 feet off the ground. Therefore, the distance from the center of the wheel to the ground is (radius+15) feet.
So, the height from the top of the Ferris wheel to the ground is :
height = distance covered by Ferris wheel in 60 seconds - distance from center to ground .
The distance covered by the Ferris wheel = Circumference of the Ferris wheel= π × diameter
3.14 × 64= 201.06 feet.∴
In 60 seconds, distance covered by the Ferris wheel = 201.06 feet.
The distance from the center of the wheel to the ground = radius + 15= 32 + 15= 47 feet.
Height from the top of the Ferris wheel to the ground = 201.06 - 47 = 154.06 feet.
To know more about circumference visit
https://brainly.com/question/28757341
#SPJ11
compute the riemann sum s4,3 to estimate the double integral of f(x,y)=2xy over r=[1,3]×[1,2.5]. use the regular partition and upper-right vertices of the subrectangles as sample points
The Riemann sum S4,3 is then given by: S4,3 = ∑∑ f(x_i+1, y_j+1) * ΔA= ∑∑ 2xy * Δx * Δy= 60.5 + 80.5 + 100.5 + 90.5 + 120.5 + 150.5 + 12
To compute the Riemann sum S4,3 for the double integral of f(x,y) = 2xy over R=[1,3] x [1,2.5], we need to partition the region R into smaller subrectangles and evaluate the function at the upper-right vertex of each subrectangle, then multiply by the area of the subrectangle and add up all the values.
Using a regular partition, we can divide the interval [1,3] into 4 subintervals of length 1, and the interval [1,2.5] into 3 subintervals of length 0.5, to get a grid of 4 x 3 = 12 subrectangles. The dimensions of each subrectangle are Δx = 1 and Δy = 0.5.
The upper-right vertex of each subrectangle is given by (x_i+1, y_j+1), where i and j are the indices of the subrectangle in the x and y directions, respectively. So we have:
(x_1, y_1) = (2, 1.5), f(x_1, y_1) = 221.5 = 6
(x_1, y_2) = (2, 2), f(x_1, y_2) = 222 = 8
(x_1, y_3) = (2, 2.5), f(x_1, y_3) = 222.5 = 10
(x_2, y_1) = (3, 1.5), f(x_2, y_1) = 231.5 = 9
(x_2, y_2) = (3, 2), f(x_2, y_2) = 232 = 12
(x_2, y_3) = (3, 2.5), f(x_2, y_3) = 232.5 = 15
(x_3, y_1) = (4, 1.5), f(x_3, y_1) = 241.5 = 12
(x_3, y_2) = (4, 2), f(x_3, y_2) = 242 = 16
(x_3, y_3) = (4, 2.5), f(x_3, y_3) = 242.5 = 20
(x_4, y_1) = (5, 1.5), f(x_4, y_1) = 251.5 = 15
(x_4, y_2) = (5, 2), f(x_4, y_2) = 252 = 20
(x_4, y_3) = (5, 2.5), f(x_4, y_3) = 252.5 = 25
The Riemann sum S4,3 is then given by:
S4,3 = ∑∑ f(x_i+1, y_j+1) * ΔA
= ∑∑ 2xy * Δx * Δy
= 60.5 + 80.5 + 100.5 + 90.5 + 120.5 + 150.5 + 12
To know more about Riemann sum refer to-
https://brainly.com/question/30404402
#SPJ11
Eight men can build a bridge in 12 days. Find the time taken for 6 men to build the same bridge. (this is an inverse proportion question)
This is an inverse proportion question, which means that as the number of men decreases, the time taken to build the bridge will increase, and vice versa. We can use the formula:
Men x Days = Constant
To solve this problem, we need to first find the constant. We know that eight men can build the bridge in 12 days, so:
8 x 12 = 96
Therefore, the constant is 96. Now we can use this to find the time taken for 6 men to build the same bridge:
6 x Days = 96
Days = 16
Therefore, 6 men can build the same bridge in 16 days. It's important to note that this assumes that the amount of work required to build the bridge is the same regardless of the number of men working on it. In reality, this may not be the case, and other factors such as efficiency and productivity may come into play.
To learn more about inverse proportion click here : brainly.com/question/31891052
#SPJ11
a 10 d lens is placed in contact with a 15 d lens. what is the refractive power of the combination?
The combination has a refractive power of 0.167 diopters.
The refractive power of a lens is given by the formula P = 1/f, where f is the focal length of the lens in meters. The focal length of a lens in diopters (d) is given by f = 1/d.
To find the refractive power of the combination of a 10 d lens and a 15 d lens, we need to find the equivalent focal length of the combination. The equivalent focal length of two lenses in contact can be found using the formula:
1/f = 1/f1 + 1/f2
where f1 and f2 are the focal lengths of the individual lenses.
Substituting the values for the focal lengths of the two lenses, we get:
1/f = 1/10 + 1/15
Simplifying, we get:
1/f = 1/6
Multiplying both sides by 6, we get:
f = 6 meters
Therefore, the refractive power of the combination of the 10 d and 15 d lenses is:
P = 1/f = 1/6 = 0.167 d^-1.
Thus, the combination has a refractive power of 0.167 diopters.
Learn more about refractive power here
https://brainly.com/question/31473236
#SPJ11
A car company took a random sample of 85 people and asked them whether they have a plan to purchase an electronic car in the near future. 18 of them responded that they have a plan to buy one. What is the error term of a 96% confidence interval for the population proportion of people having a plan to buy an electronic car?
the error term of the 96% confidence interval for the population proportion of people having a plan to buy an electronic car is approximately 0.076.
To calculate the error term of a confidence interval for the population proportion, we first need to calculate the margin of error using the following formula:
Margin of error = z* * sqrt(p_hat*(1-p_hat)/n)
where:
z* is the critical value of the standard normal distribution for the desired level of confidence. For a 96% confidence level, the critical value is 1.750.
p_hat is the sample proportion, which is calculated as p_hat = x/n, where x is the number of people in the sample who have a plan to purchase an electronic car (18 in this case) and n is the sample size (85 in this case).
Using these values, we have:
Margin of error = 1.750 * sqrt(0.2118*(1-0.2118)/85) ≈ 0.076
To learn more about proportion visit:
brainly.com/question/30657439
#SPJ11
Which equation is represented by the graph below?
5
4+
3+
2+
t
5 4 3 -2 -11
+ +
4 5
1
2.
3
3
-27
-3+
T 17
The equation represented by the graph is given as follows:
[tex]y = e^x[/tex]
How to define an exponential function?An exponential function has the definition presented as follows:
[tex]y = ab^x[/tex]
In which the parameters are given as follows:
a is the value of y when x = 0.b is the rate of change.For a logarithm with base e, with intercept of y = 1, the equation is given as follows:
[tex]y = e^x[/tex]
Which is the equation for this problem.
Missing InformationThe graph is given by the image presented at the end of the answer.
More can be learned about exponential functions at brainly.com/question/2456547
#SPJ1