Extranet is a lan that uses the same technologies as the internet but is provided to invited users outside the organization who access it over the internet.
What is LAN?
In order to link devices to internal servers, web servers, and other LANs via wide area networks, a LAN is made up of cables, access points, switches, routers, and other parts.
The development of virtual LANs, which allow network managers to logically organise network nodes and partition their networks without the need for significant infrastructure upgrades, has also been fuelled by the rise of virtualization.
For instance, the computers in each department in an office with numerous departments, such as accounting, IT support, and administration, could be logically connected to the same switch but segmented to operate separately.
The benefits of a LAN are the same as those of any collection of connected devices. Each device has access to a single Internet connection, can exchange files,
Read more about LAN:
https://brainly.com/question/8118353
#SPJ4
select one of the answers below that is a possible side effect of not adhering to accepted web standards.
A monopolized commodity is a possible side effect of not adhering to accepted web standards. Therefore, following web standards while developing websites is often a good strategy to help satisfy the expectations of your users.
What are web standards, and why are they significant?Our technology for creating websites is based on web standards. The specifications for these standards, which describe in great detail how the technology should function, are lengthy technical texts. The way a website interacts with assistive devices is standardized thanks to web standards.
Therefore, to ensure a consistent end-user experience, web designers and developers can include instructions on their pages that can be understood by assistive technologies. When we think about developing technology, the importance of web standards becomes clearer. Every page you develop is inherently cross-browser and cross-platform when standards are used.
To learn more about web standards, visit:
https://brainly.com/question/29466591
#SPJ4
The complete question is:
Select one of the answers below that is a possible side effect of not adhering to accepted web standards.
a) stricter coding skills.
b) a monopolized commodity
c) achieve a more stable web
d) greater visibility in web searches
Which of the following financial ratios shows the company's liquidity? A. Debt to equity ratio B. Current ratio C. Debt ratio D. Return on equity Please select the best answer from the choices provided A B C D
The financial ratios that shows the company's liquidity is option B. Current ratio.
What is liquidity about?The current ratio is a financial ratio that shows a company's liquidity, and it is calculated by dividing a company's current assets by its current liabilities. It measures a company's ability to pay off its short-term debt with its current assets.
Note that A ratio of 1:1 is considered to be ideal, indicating that a company has enough current assets to pay off all of its current liabilities. A ratio greater than 1:1 indicates that the company has more current assets than liabilities, while a ratio less than 1:1 indicates the opposite.
Learn more about liquidity from
https://brainly.com/question/13873343
#SPJ1
Hi, I'm doing Code HS right now and I need someone who understands python to help me write a working code, I've tried numerous times and it keeps showing incorrect on CodeHS.
These are the directions for "Exclamation Points"
Words are way more edgy when you replace the letter i with an exclamation point!
Write the function exclamations that takes a string and then returns the same string with every lowercase i replaced with an exclamation point. Your function should:
Convert the initial string to a list
Use a for loop to go through your list element by element
Whenever you see a lowercase i, replace it with an exclamation point in the list
Return the stringified version of the list when your for loop is finished
Thank you for your time!!
Answer:
Here's a Python code that should accomplish the task described in the directions:
Copy code
def exclamations(s):
s = list(s)
for i in range(len(s)):
if s[i] == 'i':
s[i] = '!'
return ''.join(s)
This code first converts the input string to a list so that individual characters can be accessed and modified. Then, it uses a for loop to go through each element of the list (in this case, each character of the original string). If the current character is a lowercase i, it is replaced with an exclamation point. Finally, the modified list is converted back to a string and returned.
The key is to know that the string type in python is immutable and you can't modify it by index like you do with list, you need to convert it into a list to be able to modify its elements.
It's also good to check if the string is converted to lowercase before the comparision, this way you could replace all the possible 'i' that could be in uppercase too.
Explanation:
a network administrator recently learned users have been accessing websites that are restricted based on content by the firewall. to prevent users from circumventing the firewall rules, which of the following windows settings should the administrator locks to prevent them from being changed?
Failure of the data server is another frequent reason for connectivity issues. Router issues could possibly be to fault.
Any piece of equipment malfunctioning could cause a full network breakdown. In the absence of a backup or redundant system to take over, operations that depend on connectivity may stop working entirely. The arduous process of connecting several network components together, which may need the use of routers, switches, and gateways, is referred to as "network connection." More details are available in Future Opportunities for Personalized Online Global Learning. What common causes of poor network quality exist? Poor network quality may be caused by the following elements: network is slow. Hardware used for networking, such as routers, is overworked. Failure of the data server is another frequent reason for connectivity issues. Router issues could possibly be to fault.
Learn more about Network connection here:
https://brainly.com/question/30260223
#SPJ4
post-mortem
walkthrough
Zion and Luca are members of a development team that recently released a new
video game. They participated in a live discussion panel at GDC to share details
about the design and production process with an audience. Their discussion is an
example of what type of external resource?
(1 point)
game tutorial
<
game wiki
9 of 50
>
The live discussion panel at GDC that Zion and Luca participated in is an example of a post-mortem, which is a retrospective analysis of a project or product's development process.
What is a Post-Mortem?A project post-mortem is a procedure used to determine the reasons behind a project failure (or a prolonged period of downtime that negatively impacts business operations) and how to avoid it in the future. This is distinct from a retrospective, which examines both good and bad aspects of a project.
Hence, it can be seen that It is an external resource that can provide insight and lessons learned for others in the industry.
Read more about post mortem here:
https://brainly.com/question/21123962
#SPJ1
Two motors m1 and m2 are controlled by three sensors s1,s2 and s3 one motor s2 is to run any time all three sensors are on the other motor is to run whenever sensor s2 or s1 but not both are on and s3 is off for all sensor combinations where m1 is on m2 is to be off except when all three sensors are off and then both motors must remain off. Design a logic circuit for this problem and all steps
Answer:
s1 -> OR gate -> AND gate (with s3 as the other input) -> m2 s2 -> OR gate (with s1 as the other input) -> AND gate (with s3 as the other input) -> m2 s3 -> AND gate (with output of OR gate as the other input) -> m2 s1,s2,s3 -> AND gate -> NOT gate -> AND gate (with output of AND gate for m2 as the other input) -> m1
Explanation:
let's design a logic circuit for controlling motors m1 and m2 based on the sensor inputs s1, s2, and s3.
First, let's start with the first condition: motor m1 must run whenever all three sensors s1, s2, and s3 are on. To do this, we can use an AND gate with all three sensor inputs as inputs. The output of this AND gate will be the control signal for motor m1.
Next, let's move on to the second condition: motor m2 must run whenever sensor s2 or s1 are on, but not both, and s3 is off. To accomplish this, we can use an OR gate for sensor s1 and sensor s2, with an AND gate having the output of OR gate and s3 as inputs. The output of this AND gate will be the control signal for motor m2.
Finally, the third condition: for all sensor combinations where m1 is on, m2 is to be off except when all three sensors are off and then both motors must remain off.
To accomplish this, we can use a NOT gate on the output of the AND gate for motor m1. The output of this NOT gate will be connected to an AND gate with the output of the AND gate for motor m2 and an OR gate with s1, s2, and s3 as inputs.
So, the final logic circuit will look like: s1 -> OR gate -> AND gate (with s3 as the other input) -> m2 s2 -> OR gate (with s1 as the other input) -> AND gate (with s3 as the other input) -> m2 s3 -> AND gate (with output of OR gate as the other input) -> m2 s1,s2,s3 -> AND gate -> NOT gate -> AND gate (with output of AND gate for m2 as the other input) -> m1
And that's it! A fun and easy way to control motors m1 and m2 based on sensor inputs s1, s2, and s3.
describe at least two different ways to initialize a single dimensional array of size 4. give an example.
A group of identically data-typed elements that are stored in a linear arrangement under a single variable name constitute a one-dimensional array.
What is single dimensional array example?One of Array's most straightforward forms is this one. Both its definition and application in programs are fairly simple. A One Dimensional Array is a very practicable sort of Data structure since the values it stores may be initialized and changed with ease.
where,
Array name is equal to the 1D array's name.
Determines how many elements are in the array using array size
The syntax of initialization
The declaration syntax of the 1D Array is simply modified by adding a list on the right side. In plain English, we just allocate values to the defined 1D array according to the array size supplied.
To Learn more About one-dimensional array Refer To:
https://brainly.com/question/12976375
#SPJ4
C++ Write an expression to access the last character of a string class object str (not C-string)
Strings in C++ are represented by arrays of characters. The end of the string is marked with a special character, the null character
In C++, how do I retrieve the final character of a string?To acquire a reference to the string’s last character, use string. Back(). The final character of the string is also the first character of the reversed string, hence string.rbegin() returns an iterator to the last character. The initial character in a string appears at index zero, while the last character appears at index length of string-1.
// string::back
#include <iostream>
#include <string>
Int main ()
{
Std::string str (“hello world.”);
Str.back() = ‘!’;
Std::cout << str << ‘\n’;
Return 0;
}
To learn more about string to refer:
https://brainly.com/question/4087119
#SPJ4
What is the name of the method used to start a thread execution? Select one:
a. Init();
b. Resume();
c. Start();
d. Run();?
The name of the method used to start a thread of execution is Start();. The correct option is c.
What is a thread of execution?
A thread of execution in computer science is the shortest series of programmed instructions that may be controlled independently by a scheduler, which is usually part of the operating system. Threads and processes are implemented differently in different operating systems.
The start() method instructs this thread to start execution; the Java Virtual Machine invokes the thread's run method.
Therefore, the correct option is c. Start();
To learn more about the thread of execution, refer to the link:
https://brainly.com/question/8817970
#SPJ1
You are designing a small app that will receive web requests containing encoded geographic coordinates. Calls to the app will occur infrequently. You need to minimize the cost.
Which compute solution should you recommend?
Select only one answer.
Azure Functions
Azure Container Instances
Azure Batch
Azure API Management
Azure Functions should be recommended as a compute solution to minimize the cost. Hence option A is correct.
What is Azure Functions?Azure Functions is a serverless compute service that allows you to run code in response to specific events, such as web requests, without having to provision or manage infrastructure. This can be a cost-effective solution for small apps that receive infrequent web requests, since you only pay for the compute resources you use.
Therefore, Azure Container Instances and Azure Batch are solutions that are useful for running containerized workloads and large-scale batch processing, respectively, but they may not be the best fit for this scenario as they require you to provision and manage infrastructure, even if usage is low.
Learn more about Azure Functions from
https://brainly.com/question/29433704
#SPJ1
Can someone explain to me how to use the while loop for this exercise?
Answer:
To use a while loop for this exercise, you would first initialize a variable, such as "counter," to 0. Then, you would set up the while loop so that it continues to run as long as the value of "counter" is less than the total number of sections you have in your data set. Within the while loop, you would include instructions to read in the data for each section, such as using the input() function to prompt the user for the course number, section, and meeting time and location. You would then use an if statement to check if the course is an online course, and if so, you would print "online" in place of the meeting time and location. Finally, you would increment the "counter" variable by 1 at the end of each iteration of the while loop so that the loop eventually terminates when all sections have been read in and printed.
Answer:
Explanation:
There is insufficient information to accurately respond but I have done in a simple manner.
Since I don't know what the contents of the two python files referred to in the document, I have used my own formatting method and check for moving to a newline.
Also, don't know how the data is inputted; I have assumed that the data is in a file called data.txt
There are more elegant ways t do this but I have done this quickly and simply
with open("data.txt") as f: # open file for reading
data = f.read() # read all data
lines = data.split() #split data into individuals
i = 1 #counter to track how many lines outputted
for line in lines: # for each item in lines
print('{:20s}'.format(line), end = '') # suppress line feed
if i % 3 == 0: #check to see if 3 items printed out
print() # if so, print new line
i+=1 #increment counter
f.close() # close file - not necessary if using open
WHICH OF THE FOLLOWING IS NOT A RISK YOU FACE WHEN OPENING AN UNKNOWN ATTACHMENT CONTAINED WITHIN AN EMAIL?
Some of the unexpected or suspicious email attachments should never be opened. This is not a risk that you can face while opening an unknown attachment contained within an email.
What are the risks when opening unknown email attachments?Opening an infected attachment can have serious consequences. It may launch a keylogger that steals personal information such as usernames and passwords, takes periodic screenshots, grabs sent emails, or harvests credit card numbers and bank details.
Email attachments can be used to phish for personal information or to deliver ransomware. In order to protect yourself and your data, it is important to be careful when opening email attachments.
Make sure that you trust the sender and that the file is from a reputable source before you open it.
To learn more about Emails, refer to the link;
https://brainly.com/question/24688558
#SPJ1
Select the various tabs found in the Clock, Language, and Region section of Windows 7
Ease of Access
Formats
Keyboards and Languages
Internet Time
Date and Time
Hardware and Sound
Speech Recognition
Location
Additional Clock
The various tabs that are found in the Clock, Language, and Region section of Windows 7 are Keyboards and Languages, date and time, hardware and sound, location, etc.
What is meant by tabs?In computer, tabs may be characterized as the term that is used for aligning text in a word processor by moving the cursor to a predefined position.
It is part of the paragraph formatting feature and is usually accomplished with help of the tab key or options provided in the word processor.
Tabs are a paragraph-formatting feature that is used to align text. When you press the Tab key, Word inserts a tab character and moves the insertion point to the tab setting, called the tab stop.
Therefore, the various tabs that are found in the Clock, Language, and Region section of Windows 7 are Keyboards and Languages, date and time, hardware and sound, location, etc.
To learn more about Computer's tabs, refer to the link:
https://brainly.com/question/29102587
#SPJ1
while entering information into blockworks, the input screen for 1099-div can easily be added to the forms list by:\
1. Navigate to the Forms Library in the Blockworks dashboard.
2. Select the "Add Form" button.
What is Navigate?Navigate is an online platform that provides students with personalised learning resources and guidance. It helps students to develop the skills they need to succeed in their studies and to build a successful career. It provides access to an extensive library of learning resources, including online courses, tutorials, and practice tests. It also provides tools to track progress and manage study schedules, as well as access to mentors and career advisors.
3. Select the 1099-DIV form from the list of available forms.
4. Complete any additional information requested (e.g. the form year, filing instructions, etc.)
5. Click "Save" to save the form.
6. The 1099-DIV form is now added to the Forms Library and is ready for use.
To learn more about Navigate
brainly.com/question/20380753
#SPJ4
I am used to relocate the steering wheel to a more comfortable position for driving. What
am I? How does it help me as the driver?
You are likely a person with a physical disability, and you are using a steering wheel knob or spinner.
This device is an attachment that attaches to the steering wheel of a vehicle, allowing the driver to use their hands to steer the wheel more easily. The knob or spinner is typically located at the top of the steering wheel, and the driver can grip it with one hand to turn the wheel. This can make it easier for the driver to steer the vehicle, especially if they have limited hand strength or mobility.What is the steering wheel about?It can help you in many ways, it can make it easier to steer the vehicle if you have limited hand strength or mobility, it can also help you to avoid discomfort or pain while driving, it can also help to improve the overall control of the vehicle and it can also make it easier to perform maneuvers such as parallel parking or making tight turns.
Therefore, It's important to note that, before installing or using this device, you should check the laws in your country and region to make sure that it is allowed, and also you should check with the vehicle manufacturer or a qualified mechanic to ensure that the device is compatible with your vehicle and it is installed properly.
Learn more about steering wheel from
https://brainly.com/question/14183688
#SPJ1
Python Code to be wriiten:
Will mark as brainliest if correct!
A bunny can hop at most 50 centimetres far. It wants to cross to the other side of the river, but it cannot swim. So the only hope is to hop on the rocks on the river, which are positioned in a straight line. The positions of the rocks are measured from the start location, assuming that the bunny starts at the 0 cm mark. The opposite bank could be treated as a big rock. It is the final rock in the tuple of rocks.
In the Figure below, the rocks are at locations 32, 46, 70, 85, 96, 123, and the opposite riverbank is at location 145.
The bunny will jump as far as it could for each hop. What is the smallest number of jumps it needs to take to reach the other side of the river? For the above example, it needs to make 3 jumps, as shown in the diagram above.
You may assume that there are at most 20 rocks (including the opposite bank).
Write a function rabbit that takes in a tuple representing the locations of the rocks. Your function should return the minimum number of jumps needed, or -1 if it is not possible for the bunny to reach the other side of the river. You may assume that the locations of the rocks in the tuple are valid (bigger than 0) and they are sorted in ascending order.
def rabbit(rocks):
# Fill in your code here
Test Cases:
rabbit((32, 46, 70, 85, 96, 123, 145)) 3
rabbit((40, 70, 150, 160, 180)) -1
rabbit((30, 70, 75, 120, 160, 170, 180, 190, 200, 246, 258)) 7
rabbit((51, 52, 53, 54, 55, 56, 57, 58)) -1
rabbit((50, 51, 101, 102, 152, 153, 203, 204, 254, 255, 305, 306, 356, 357, 407)) 15
Using the knowledge in computational language in python it is possible Write a function rabbit that takes in a tuple representing the locations of the rocks.
Writting the code:def rabbit(rocks):
jumps = 0
prev = 0
cursor = 0
i = 0
while i < len(rocks):
rock = rocks[i]
if rock - prev < 50:
cursor = rock
i += 1
continue
elif rock - prev >= 50 and prev != cursor:
jumps += 1
prev = cursor
continue
else:
return -1
if i == len(rocks):
rock = rocks[i-1]
if rock - prev <= 50:
jumps += 1
if jumps == 0:
return -1
return jumps
See more about python at brainly.com/question/29897053
#SPJ1
please help me out, 30 pts
The statement that describes what is happening to cause current to flow
B. Voltage is when current flows from higher to lower potential energy
How to explain the informationThe difference in electric potential between two places is referred to as voltage. Due to voltage, current in the wire always flows from greater potential to lower potential.
The voltage of the current is high at the electric source, but as it travels along the wire, it loses strength until it reaches the opposite end of the circuit. This is due to the wire's internal resistance, which results in heat energy and some current loss.
Therefore, the correct option is B.
Learn more about voltage on:
https://brainly.com/question/16791395
#SPJ1
Identify the examples of backgrounds. Select three options.
Choose some backgrounds as samples. Sabir was reared in a Muslim household, Jean has politically active parents, and Bao spent her childhood participating in Chinese cultural events.
A background information is what?Background information usually gives a brief history of the subject or explains how the issue the topic covers came to be. Additionally, it might demonstrate the value of the subject or offer a solution to a dilemma. After grabbing the reader's attention, the writer would normally include three to five sentences of background information.
What do your past experiences mean?Your background includes the type of family you were raised in and the type of education you received.
To know more about backgrounds visit :-
https://brainly.com/question/30114468
#SPJ1
The complete question is :
Identify the examples of backgrounds. Select three options.
Sabir was raised in a Muslim family.
Michael wants to earn a college degree.
Irene is planning to become a Carpenter.
Jean has parents who have strong political views.
George wants to learn how to style hair.
Bao grew up participating in Chinese cultural activities.
HELP ME OUT PLEASE!!!!!
A marketing campaign wants to target people based on their race, marital status, and religion. Which type of targeting will they use?
Demographics
Psychographics
Behavior
Geography
Answer:
Behavior
Explanation:
Wants target people bases on their race
Tabble Convert
Question 6 (1 point) ✓ Saved
When working together on a group project, rather than editing someone elses work then
you can add
so that the reader can take note of your thoughts on
their work.
Since nearly all co-authored projects require participants to agree on what should be written and how to execute this writing, collaborative writing by its very nature necessitates more communication than solitary work.
How does co-author analysis work?
A technical document's co-authorship is an acknowledged indication that two or more authors or organisations were involved. Co-authorship analysis is still frequently employed to comprehend and evaluate scientific collaboration patterns in spite of the controversy around its meaning and interpretation.
To share the workload, many writers choose to collaborate. Having a partner with whom to brainstorm and share ideas with might be beneficial.
For some people, co-authoring works brilliantly as a solution. The definition of collaboration is "to cooperate with another individual or group to achieve or do something." Be a co-author of (a book, paper, or report) is the definition of co-authoring.
To learn more about communication,
https://brainly.com/question/28082230
#SPJ1
Help Build these steps please
Q1. Build a query that produces a list of the station numbers from every row in the relation (hint: 28000 rows, 1 column)
Q2. Build a query that produces a list of unique station numbers in the relation (hint: 6368 rows, 1 column)
Q3. Build a query that produces a list of all tuples ("rows") from the year 1992 where there was any snow depth reported (hint: 54 rows)
Q4. Build a query that produces a list of all tuples where it the temperature was outside of the range of 0-100 (inclusively) (hint: 1093 rows)
Q5. Build a query that produces a list of unique station numbers that have reported a temperature over 100 (hint: 7 rows, 1 column)
To build a query, the SELECT clause's most basic SQL syntax is as follows: SEARCH FOR * IN TABLE NAME; This SQL command will pick out every row and every column from the table.
What is a query?A graphical user interface for writing SQL queries is offered by Query Builder. To create SQL statements, you can drag and drop various tables, views, and columns into a visual designer.
Using Query Builder, you can complete the following tasks: working with SQL code or a query's graphical representation. The Data Tools Platform (DTP) SQL.
Therefore, the SELECT clause's most fundamental SQL syntax to construct a query is as follows: PUT A * IN THE TABLE NAME; With this SQL query, the entire table's rows and columns will be selected.
To learn more about the query, refer to the link:
https://brainly.com/question/29575174
#SPJ1
wans connect nodes, such as workstations, servers, printers, and other devices, in a small geographical area on a single organization's network, whereas lans use networking devices, such as routers and modems, to connect networks spread over a wide geographical area.
Wans connect nodes on a single network in a limited area, including workstations, servers, printers, and other devices.
A server is a piece of hardware or software (computer program) used in computing that provides functionality to other applications' "clients," which are other programs or devices. This design is known as the client-server model. Commonly referred to as "services," the tasks that servers might provide include things like doing computation for a client or transferring data or resources among numerous clients. A single client or server can accommodate a large number of clients. A client process may run on a single device or may connect over a network to a server process running on a different device. Database servers, file servers, and mail servers are the three most used types of servers.
Learn more about Client-server model here:
https://brainly.com/question/30019595
#SPJ4
What information does Gregory's team need to have on hand as they're setting prices for each item in their company's new line of shoes? Choose all that apply.
Answer:
Gregory's team need to have on hand:
Explanation:
The cost of materials and labor to produce each shoeThe desired profit margin for the companyThe prices of similar products offered by competitorsThe target demographic and their willingness to pay for the productThe expected demand for the productThe marketing and promotional expenses associated with the productAny additional costs such as taxes, duties, or tariffs that will affect the final price.The information that the Gregory's team will need to have on hand as they are the setting prices for each item in their company's new line of shoes are the current level of the market's familiarity and preference for his company's brand.
What is price?Price could be described as the means of the exchange the value of goods or the services in terms of the money. Perceived value of the differentiating factors for his company's shoes that the competitors' prices on similar items.
It must be noted that the Price of the product or the service serves as the thing that the seller compare with the value of the product or the service just before making the decision of making the purchase from the seller.
Therefore, The information which the Gregory's team has been need to have on hand is that the prices of company increased.
Learn more about price on:
https://brainly.com/question/19091385
#SPJ2
The question seems to be incomplete the complete question will be
What information does Gregory's team need to have on hand as they're setting prices for each item in their company's new line of shoes? Choose all that apply.
a. Payment systems currently available at retailer locations
b. Current level of the market's familiarity and preference for his company's brand
c. Perceived value of differentiating factors for his company's shoes
d. Competitors' prices on similar items
per the statute, when a condominium is sold, specific documents must be provided from the seller to the buyer. the seller must provide the buyer with 7 different required documents. which of the following is not one of those 7 documents?
Board of Directors contact information is not one of those 7 documents.
What is condominium?
A condominium, commonly known as a "condo," is a sizable building complex made up of independent apartments, each of which is owned separately. Typically, ownership includes a nonexclusive stake in particular "common property" that is under the supervision of the condominium.
A board of unit owners typically manages everyday operations of the complex, such as lawn care and snow removal, in a condominium.
One way to define a condo is as owning the space inside a multi-unit building. As stated in this description, the condo owner does not own the four walls separating their unit from other units or the property's common facilities. The walkways, stairwells, floor, and outside spaces are all considered to be a part of the common ownership.
Read more about condominium:
https://brainly.com/question/1167654
#SPJ4
As a cybersecurity consultant, you were part of a team hired to conduct pen testing to evaluate the security of your client’s IT infrastructure. Why is it critical to perform pen testing on the internal network of your client prior to production implementation?
Penetration Testing also known as Ethical hacking is a proactive measure taken by companies or organizations to protect their systems from hackers.
What happens in the process?In this process, they generally attacks has been launched against the system by the professionals to the ascertain the weaknesses, vulnerabilities, and strengths of the software.
Recommendations on the areas just to improve are now made to the clients. Calming client's fears would entail making them understand the scope of testing.
Therefore, Penetration Testing also known as Ethical hacking is a proactive measure taken by companies or organizations to protect their systems from hackers.
Learn more about organizations on:
https://brainly.com/question/16296324
#SPJ1
Write the C++ program that, using specifically created functions for the geometric sequence with the quotient q entered by the user, will:
a.Calculate and print the first 100 elements
b.Calculate and print the sum of the first 100 elementsThe main loop of the program should providing the subsequent elements, printing results of calculations and terminating the program.
The C++ application that computes and outputs the first 100 elements.
class gfg {
public:
void printNos(unsigned int n) {
if(n > 0) {
printNos(n - 1);
cout << n << " "; }
return; }
};
int main() {
gfg g;
g.printNos(100);
return 0;
}
How do you compute the sum of 1 and 100?All natural numbers between 1 and 100 add up to 5050. In this range, there are 100 natural numbers in total. Thus, we obtain S=5050 by using this number in the formula: S = n/2[2a + (n 1) d].
How can 100 numbers in an array be printed?num[num] = num[num-1] +1; to round the previous number up by one before printing it. Now it prints perfectly. if (int a = 0; a > 100; a++) number[100] += number[a]; / add number[a] to result printf("%d\n",number[100]);
To know more about C++ program visit :-
https://brainly.com/question/27018455
#SPJ1
A _________________ is a storage area inside the CPU that is optimized for speed
A memory is a storage area inside the CPU that is optimized for speed.
What is computer memory?Memory is a computing term for a system or device that stores data for immediate use in a computer, computer hardware, or other digital electronic devices.
The terms main memory and primary storage are frequently used interchangeably. Store is a dated word for memory.
Other names for primary storage are main memory and internal memory. The program instructions, input data, and intermediate results are kept in this area of the CPU. Its size is often smaller.
Examples of primary storage include RAM (Random Access Memory) and ROM (Read Only Memory).
Thus, a storage space inside the CPU that is geared toward speed is called a memory.
For more details regarding computer memory, visit:
https://brainly.com/question/30273393
#SPJ1
What import option should you choose when you want to import a premiere profile and create a sequence with each of the premiere pro layers as individual tracks
The import option that you choose when you want to import a premiere profile and create a sequence with each of the premiere pro layers as individual tracks is Import As: Sequence
What is Import As: Sequence?This option allows you to import a Premiere Pro project or sequence into another project and have the layers automatically separated into individual tracks in the new sequence. This allows you to have more flexibility in editing and manipulating the individual elements of the imported sequence.
Therefore, In Premiere Pro, to import a project or sequence as a sequence, you can go to File>Import and then select the project or sequence file. In the options, you will see an "Import As" dropdown menu. You should select "Sequence" from the options.
Learn more about import from
https://brainly.com/question/23639237
#SPJ1
which of these problems are examples of descriptive analytics? group of answer choices computing the average monthly product sales over the last year predicting the winner of a major sporting event determining the most scenic drive from los angeles to el paso, texas determining the location of an error in the programming assignment exactly two of the answers are correct. none of the answers are correct.
Computing the average monthly product sales over the last year and determining the location of an error in the programming assignment are both examples of descriptive analytics.
What is programming?Programming is the process of creating instructions for computers to execute in order to complete specific tasks. It involves writing code, which is a set of instructions and commands that tell the computer what to do and how to do it, using programming languages such as JavaScript, Python, Ruby, C, C++, and more. Programming is used to create websites, software applications, artificial intelligence, operating systems, and more. It is an essential skill to have in the technology-driven world we live in and can be used to solve problems, automate processes, and create new products.
Predicting the winner of a major sporting event and determining the most scenic drive from Los Angeles to El Paso, Texas are not examples of descriptive analytics.
To learn more about programming
https://brainly.com/question/22654163
#SPJ4
find transformation matrix to rotate the line which is parallel to y-axis and passing through point (0, 4, 0), by an angle 0 = 45°
The transformation matrix to rotate the line which is parallel to y-axis and passing through point (0, 4, 0), by an angle 0 = 45° is
| cos(45) 0 sin(45) |
| 0 1 0 |
|-sin(45) 0 cos(45) |
How do you find transformation matrix to rotate the line which is parallel to y-axis?A rotation matrix can be used to rotate a point or vector in a 3D space. To rotate a line, you would need to rotate the points on that line.
To find the transformation matrix for a 45-degree rotation about the x-axis, you can use the following matrix:
Copy code
| 1 0 0 |
| 0 cos(45) -sin(45) |
| 0 sin(45) cos(45) |
This matrix can be applied to a point (x, y, z) by multiplying it as follows:
Copy code
| x' | | 1 0 0 | | x |
| y' | = | 0 cos(45) -sin(45) | * | y |
| z' | | 0 sin(45) cos(45) | | z |
However, this matrix will rotate the point about x-axis, but you need to rotate about y-axis.
To find the transformation matrix for a 45-degree rotation about the y-axis, you can use the following matrix:
Copy code
| cos(45) 0 sin(45) |
| 0 1 0 |
|-sin(45) 0 cos(45) |
This matrix can be applied to a point (x, y, z) by multiplying it as follows:
Copy code
| x' | | cos(45) 0 sin(45) | | x |
| y' | = | 0 1 0 | * | y |
| z' | |-sin(45) 0 cos(45) | | z |
Keep in mind that this matrix will rotate the point about y-axis, if you want to rotate about x or z axis you need to use different matrix.
Therefore, the correct answer is as given above
learn more about transformation matrix: https://brainly.com/question/16736738
#SPJ1