find the area of the region under the graph of the function f on the interval [−1, 4]. f(x) = 2x 5

Answer: 0.85^8 * 0.15^2

0.196%

The relative frequency is solved and the table of values is plotted

Given data ,

The lunch order is given by the 2 sets of dishes as

A = { Sandwich , Pastas }

Now , the sports activities are given by 2 sets as

B = { Volleyball , Swimming }

From the table of values , we get

The relative frequency is solved as

Relative Frequency = Subgroup frequency / Total frequency

The percentage of Swimming ( sandwich ) = 26/36

Swimming ( sandwich ) = 72 %

And , the percentage of Swimming ( pasta ) = 10/36

Swimming ( pasta ) = 28 %

Now , the percentage of total sandwich = 45/70 = 64 %

And , the percentage of total pasta = 25/70 = 36 %

Hence , the relative frequency is solved

To learn more about relative frequency click :

https://brainly.com/question/29739263

#SPJ1

Answer: It is in the 4th quadrant.

Step by step explanation: Review the png image attached below.

Answer: What is a quadrant of a coordinate plane?

Image result for what is a quadrant in plane geometry

A quadrant are each of the four sections of the coordinate plane. And when we talk about the sections, we're talking about the sections as divided by the coordinate axes. So this right here is the x-axis and this up-down axis is the y-axis. And you can see it divides a coordinate plane into four sections.

Quadrant one (QI) is the top right fourth of the coordinate plane, where there are only positive coordinates. Quadrant two (QII) is the top left fourth of the coordinate plane. Quadrant three (QIII) is the bottom left fourth. Quadrant four (QIV) is the bottom right fourth.

Hope this helps.

Answer: 4:15

Step-by-step explanation:

divide both by 10

Answer:4:15

Step-by-step explanation:Im just built different tbh bro

I'm not quite sure what the question is, but I think that John's age would be the independent variable, and John's height would be the dependent variable.

We can plug in the determinants:

det(B) = 3(21) - 0(0) - 2(14) + 0(0) + 1(-20) - 5(0) = 3

Using the cofactor formula, we have:

det(B) = 3 * det([3 0 3 0 1 5 0 0 7]) - 0 * det([0 -2 0 2 1 5 0 0 7])

-2 * det([2 2 3 0 1 5 0 0 7]) + 0 * det([2 3 0 0 1 5 -2 0 7])

+1 * det([2 3 0 0 3 0 -2 2 7]) - 5 * det([2 3 0 0 3 0 0 2 1])

Now we just need to calculate the determinants of each 3x3 submatrix:

det([3 0 3 0 1 5 0 0 7]) = 3(1)(7) + 0(5)(0) + 3(0)(0) - 0(1)(0) - 3(0)(0) - 0(5)(7) = 21

det([0 -2 0 2 1 5 0 0 7]) = 0(1)(7) + (-2)(5)(0) + 0(0)(1) - 2(1)(0) - 0(5)(0) - 0(0)(7) = 0

det([2 2 3 0 1 5 0 0 7]) = 2(1)(7) + 2(5)(0) + 3(0)(0) - 0(1)(0) - 3(0)(2) - 0(5)(0) = 14

det([2 3 0 0 1 5 -2 0 7]) = 2(5)(-2) + 3(0)(0) + 0(1)(0) - 0(5)(-2) - 2(0)(7) - 3(0)(2) = -20

det([2 3 0 0 3 0 -2 2 7]) = 2(0)(7) + 3(0)(-2) + 0(2)(2) - 0(0)(7) - 2(3)(2) - 0(0)(0) = -12

det([2 3 0 0 3 0 0 2 1]) = 2(0)(1) + 3(0)(0) + 0(3)(1) - 0(0)(1) - 2(0)(3) - 0(0)(0) = 0

Know more about cofactor formula here:

https://brainly.com/question/31315140

#SPJ11

By substituting the given values of a and b into the expression a³b and simplifying step by step using the rules of exponents and algebraic operations, we found that the value of a³b is -27ix.

Given: a = 3i and b = -x

To find the value of a³b, we substitute the given values of a and b into the expression:

a³b = (3i)³ * (-x)

Let's begin by simplifying the expression within the parentheses, (3i)³:

(3i)³ = (3i)(3i)(3i)

To simplify this further, we use the property that when multiplying powers with the same base, we add their exponents:

(3i)³ = 3³ * (i¹ * i¹ * i¹)

Now, simplify the numeric part:

3³ = 27

Next, simplify the imaginary part using the rule that i² = -1:

(i¹ * i¹ * i¹) = i⁽¹⁺¹⁺¹⁾ = i³

Now, we know that i³ is equal to -i:

i³ = -i

Substituting these values back into the original expression:

(3i)³ * (-x) = 27 * (-i) * (-x)

Multiplying the numeric coefficients:

27 * (-1) = -27

Therefore, the expression simplifies to:

a³b = -27ix

In fully simplified form, the value of a³b is -27ix.

To know more about equation here

https://brainly.com/question/21835898

#SPJ4

The Midpoint Rule approximation to the integral  ∬R(2y−x2)dA is -928/3.

We can subdivide the region R into 3 subintervals in the x-direction and 3 subintervals in the y-direction. This creates 3x3=9 sub rectangles of equal size.

The midpoint rule approximates the integral over each sub rectangle by evaluating the integrand at the midpoint of the sub rectangle and multiplying by the area of the sub rectangle.

The area of each sub rectangle is:

ΔA = Δx Δy = (12/3)(12/3) = 16

The midpoint of each sub rectangle is given by:

x_i = 2iΔx + Δx, y_j = 2jΔy + Δy

for i,j=0,1,2.

The value of the integral over each sub rectangle is:

f(x_i,y_j)ΔA = (2(2jΔy + Δy) - (2iΔx + Δx)^2) ΔA

Using these values, we can approximate the value of the double integral as:

∬R(2y−[tex]x^2[/tex])dA ≈ Σ f(x_i,y_j)ΔA

where the sum is taken over all 9 sub rectangles.

Plugging in the values, we get:

[tex]\int\limits\ \int\limits\, R(2y-x^2)dA = 16[(2(0+4/3)-1^2) + (2(0+4/3)-3^2) + (2(0+4/3)-5^2) + (2(4+4/3)-1^2) + (2(4+4/3)-3^2) + (2(4+4/3)-5^2) + (2(8+4/3)-1^2) + (2(8+4/3)-3^2) + (2(8+4/3)-5^2)][/tex]

Simplifying this expression gives:

[tex]\int\limits\int\limitsR(2y-x^2)dA = -928/3[/tex]

Therefore, the Midpoint Rule approximation to the integral is -928/3.

To know more about Midpoint Rule approximation refer here:

https://brainly.com/question/14693927

#SPJ11

The total area of the composite figure in this problem is given as follows:

41.3 ft².

The area of the composite figure is given by the sum of the areas of all the parts that compose the figure.

The figure in this problem is composed as follows:

Then the total area of the figure is given as follows:

A = triangle + semicircle + square

A = 0.5 x 6 x 3 + π x 3² + 2²

9 + 28.3 + 4 = 41.3 ft².

More can be learned about area of composite figures at brainly.com/question/10254615

#SPJ1

The length of the arc shown in red in the terms of pi is 2.5π

The formula for calculation of arc length is -

Arc length = 2πr(theta/360)

Theta = 25°

radius = diameter/2

Radius = 36/2

Divide the digits for the value of radius

Radius = 18 m

Keep the values in formula to find the arc length -

Arc length = 2π× 18(25/360)

Performing the calculation

Multiply the numbers outside bracket except π

Arc length = 36π (25/360)

Dividing the numbers 36 and 360

Arc length = 25π/10

Again perform division

Arc length = 2.5π

Thus, the arc length of the shown arc is 2.5π.

Learn more about arc -

https://brainly.com/question/30582409

#SPJ1

This is a right angle so it's 90 degrees. Angle 1 and angle 2 add to 90.

Angle 1 = x+2. Angle 2 = 7x.

So let's add those two angles and set them equal to 90.

(x+2) + 7x = 90

Now solve for x.

8x + 2 = 90

8x = 88

x = 11

Substitute x = 11 back into the equations for Angle 1 and Angle 2 (given in the problem) to find the measures of these angles.

Angle 1 = x+2 = 11+2 = 13 degrees.

Angle 2 = 7x = 7*11 = 77 degrees.

Let's do a quick check - - - angle 1 + angle 2 should equal 90!

13 + 77 = 90.

The z value associated with this normally distributed data is F. - 0.53.

To find the Z-score associated with the value 272, given normally distributed data with an average (mean) of 281 and a standard deviation of 17, you can use the following formula:

Z = (X - μ) / σ

Where Z is the Z-score, X is the value (272), μ is the mean (281), and σ is the standard deviation (17).

Plugging the values into the formula:

Z = (272 - 281) / 17
Z = (-9) / 17
Z ≈ -0.53

So, the correct answer is F. -0.53.

Learn more about  normally distributed data : https://brainly.com/question/25638875

#SPJ11

The answer depends on the specific problem and the given production function. Without this information, it is not possible to fill in the blank accurately.

To know more about production function refer here:

https://brainly.com/question/13646635

#SPJ11

The initial values and rates of change can be matched with the lines of best fit as follows:

Initial value: 15

Rate of change: 5

Initial value: 20

Rate of change: -4

Initial value: 15

Rate of change: -3

To match the initial values and rates of change with the lines of best fit, we need to consider the slope-intercept form of a linear equation, which is y = mx + b. In this form, 'm' represents the rate of change (slope) and 'b' represents the initial value (y-intercept).

Initial value: 15

Rate of change: 5

The line with an initial value of 15 and a rate of change of 5 will have a positive slope. As the x-values increase, the y-values will increase at a constant rate of 5 units. This line will have a positive slope and will be upward sloping.

Initial value: 20

Rate of change: -4

The line with an initial value of 20 and a rate of change of -4 will have a negative slope. As the x-values increase, the y-values will decrease at a constant rate of 4 units. This line will have a negative slope and will be downward sloping.

Initial value: 15

Rate of change: -3

The line with an initial value of 15 and a rate of change of -3 will have a negative slope. As the x-values increase, the y-values will decrease at a constant rate of 3 units. This line will have a negative slope and will be downward sloping.

By matching the given initial values and rates of change with the characteristics of the lines of best fit, we can determine which line corresponds to each set of values.

For more such questions on initial values, click on:

https://brainly.com/question/514233

#SPJ8

The value of the mean weigh is,

⇒ 9.1

We have to given that;

A scale is tested by repeatedly weighing a standard 9.0 kg weight. The weights for 10 measurements are

⇒ 9.1,8.9,9.5,9.3,8.9,9.4,9.3,8.9,9.4,8.3

Now, We can find the mean as;

⇒ 9.1 + 8.9 + 9.5 + 9.3 + 8.9 + 9.4 + 9.3 + 8.9 + 9.4 + 8.3 / 10

⇒ 91/10

⇒ 9.1

Thus, The value of the mean weigh is,

⇒ 9.1

Learn more about the addition visit:

https://brainly.com/question/25421984

#SPJ1

The values provided in the deflection profile are rounded to 4 significant figures)

(a) The discrete model equation using the 2nd Order Centered Method:

The second-order centered difference approximation for the second derivative of y at point x is:

[tex]y''(x) ≈ (y(x+h) - 2y(x) + y(x-h))/h^2[/tex]

Applying this approximation to the given differential equation, we have:

[tex](y(x+h) - 2y(x) + y(x-h))/h^2 = -wLx/EI[/tex]

(b) The system of equations after substituting all numerical values:

Using Ar = 24 inches, we can divide the beam into 5 discrete points (n = 4), with h = L/(n+1) = 120/(4+1) = 24 inches.

At x = 0, we have: ([tex]y(24) - 2y(0) + y(-24))/24^2 = -wLx/EI[/tex]

At x = 24, we have: ([tex]y(48) - 2y(24) + y(0))/24^2 = -wLx/EI[/tex]

At x = 48, we have: ([tex]y(72) - 2y(48) + y(24))/24^2 = -wLx/EI[/tex]

At x = 72, we have: [tex](y(96) - 2y(72) + y(48))/24^2 = -wLx/EI[/tex]

At x = 120, we have: ([tex]y(120) - 2y(96) + y(72))/24^2 = -wLx/EI[/tex]

(c) Solving the system with Python and providing the profile for the deflection:

To solve the system of equations numerically using Python, the equations can be rearranged to isolate the unknown values of y. By substituting the given numerical values for E, I, w, L, h, and the boundary conditions y(0) = y(120) = 0, the system can be solved using a numerical method such as matrix inversion or Gaussian elimination. The resulting deflection values at each discrete point, including the boundary values, can then be obtained.

Learn more about equation

brainly.com/question/29657983

#SPJ11

We can use the binomial distribution to calculate the probability of getting exactly 1 person in favor of the new building project out of a random sample of 9 people. Let p be the probability that any one person is in favor of the project, and q be the probability that they are not.

Then : p = 50/100 = 0.5 (since there are 50 people in favor out of a total of 100)

q = 1 - p = 0.5

The probability of getting exactly 1 person in favor of the project out of 9 people can be calculated using the binomial probability formula:

P(X = 1) = (9 choose 1) * p^1 * q^(9-1)

where (9 choose 1) is the number of ways to choose 1 person out of 9, and p^1 * q^(9-1) is the probability of getting exactly 1 person in favor and 8 people against.

Using the binomial probability formula, we get:

P(X = 1) = (9 choose 1) * 0.5^1 * 0.5^8

P(X = 1) = 9 * 0.5^9

P(X = 0.009765625)

Therefore, the probability of exactly 1 person out of 9 being in favor of the new building project is approximately 0.0098 or 0.98%.

To Know more about probability refer here

https://brainly.com/question/30034780#

#SPJ11

The sample proportion is 0.54 (54%).

The hypotheses for the one-proportion z-test are:
Null hypothesis (H0): The proportion of Generation Y Web users who use the Internet to download music is less than or equal to 0.5 (50%).
Alternative hypothesis (Ha): The proportion of Generation Y Web users who use the Internet to download music is greater than 0.5 (50%).

At  1% significance level, you would then perform the one-proportion z-test to determine if there is sufficient evidence to reject the null hypothesis in favor of the alternative hypothesis.

Learn more about hypothesis test here:

https://brainly.com/question/17099835

#SPJ11

According to the Central Limit Theorem, when N (sample size) is sufficiently large, the variance of the distribution of means is one-ninth as large as the original population's variance. The correct answer is A.

In other words, the variance of the sample means is equal to the variance of the original population divided by the sample size. Since N = 9 in this case, the variance of the distribution of means would be one-ninth (1/9) as large as the original population's variance.

The Central Limit Theorem states that as the sample size increases, the distribution of sample means approaches a normal distribution with a mean equal to the population mean and a variance equal to the population variance divided by the sample size.

To know more about variance, visit;

brainly.com/question/25639778

#SPJ11

The sum of 10 will occur approximately 50 times if the two number cubes are rolled 600 times.

To estimate the number of times that the sum will be 10 if the two number cubes are rolled 600 times, we need to consider the probability of getting a sum of 10 on a single roll.

The possible combinations that result in a sum of 10 are (4,6), (5,5), and (6,4). Each of these combinations has a probability of 1/36 (since there are 36 possible outcomes in total when rolling two number cubes).

Therefore, the probability of getting a sum of 10 on a single roll is (1/36) + (1/36) + (1/36) = 3/36 = 1/12.

To estimate the number of times this will happen in 600 rolls, we can multiply the probability by the number of rolls:

(1/12) x 600 = 50

So we can estimate that the sum of 10 will occur approximately 50 times if the two number cubes are rolled 600 times.

To know more about probability refer here :

https://brainly.com/question/22597778#

#SPJ11

The experiment provides students with the opportunity to comprehend solids and volumes visually, physically, and mathematically.

This activity aims at enabling the student to gain a better understanding of solids and volumes by constructing a three-dimensional solid out of some cardboard, calculating its volume, and answering a few questions about it. The physical model built gives students the ability to feel the object in question and examine it from all sides to come to an understanding of the object's volume. Students need their senses to understand what they're doing as they enter the 3D world, as "feeling" here means real, physical, and sense-of-touch feeling.

Students will construct a solid with six squares of the same size. This solid can be described as a rectangular cube or a hexahedron. The square faces of the cube are oriented parallel to the ground, giving it a rectangular appearance. The cross-sections used were square-shaped. The solid made from cardboard with six square faces that are congruent to one another can be compared to a rectangular box. The volume of a cube is V=a^3, where a is the length of one side of the cube, so the volume of the cube can be calculated by finding the product of the length, width, and height of the box.

The cardboard cube's volume can be calculated by multiplying the length, width, and height of the box, which should be equal since all faces are squares of the same size.Would you have computed the same volume if you'd arranged your cross-sections differently? Is that what you'd expect to happen? The volume of the object would remain constant no matter how the cross-sections were arranged. As long as the box's length, width, and height remain the same, the volume of the object will remain constant.

What did you learn about volume from this experiment?This activity provides an opportunity for students to learn and understand the concept of volume. Students can learn about the relationship between an object's volume and its shape through constructing and calculating the volume of the cardboard solid. They will learn that the volume of a 3D shape refers to the space inside of the object.

They will learn to compute volume as the product of length, width, and height, and that the volume of an object remains constant no matter how the cross-sections are arranged. The experiment provides students with the opportunity to comprehend solids and volumes visually, physically, and mathematically.

Learn more about Square here,A perfect square is a number that is the square of a whole number. For example, 25 is a perfect square because it is the...

https://brainly.com/question/27307830

#SPJ11

the equation of the median-median line for the given dataset is y = (17/60)x - 9.65. However, none of the given answer choices match this equation.

To find the equation of the median-median line for the given dataset, we need to first compute the medians of both x and y variables.

The median of x can be found by arranging the x values in ascending order and selecting the middle value. In this case, the median of x is (40 + 36) / 2 = 38.

The median of y can be found similarly. In this case, the median of y is (24 + 41) / 2 = 32.5.

Next, we need to find the slope of the median-median line, which is given by the difference in the medians of y divided by the difference in the medians of x.

slope = (median of y2 - median of y1) / (median of x2 - median of x1)

slope = (41 - 24) / (75 - 15)

slope = 17 / 60

Finally, we can use the point-slope form of a line to find the equation of the median-median line, using one of the median points (38, 32.5).

y - y1 = m(x - x1)

y - 32.5 = (17 / 60)(x - 38)

y = (17/60)x - 9.65

To learn more about median visit:

brainly.com/question/28060453

#SPJ11

Given:

Amount raised by Dalila: x

Amount raised by Cesar: y

Amount raised by Carmen: z

We have the following relationships:

z = y - 12.12 (Carmen raised $12.12 less than Cesar)

y = x + 35 (Cesar raised $35 more than Dalila)

The sum of the amount raised by all three is $95.34:

x + y + z = 95.34

Now let's substitute the values of y and z in terms of x:

x + (x + 35) + (x + 22.88) = 95.34

Simplify and solve for x:

3x + 57.88 = 95.34

3x = 37.46

x = 12.49

So, the amount Dalila raised is $12.49.

Now, let's find the amounts raised by Cesar and Carmen:

y = x + 35

= 12.49 + 35

= $47.49

Therefore, the amount Cesar raised is $47.49.

z = y - 12.12

= 47.49 - 12.12

= $35.37

Hence, the amount Carmen raised is $35.37.

To summarize:

Dalila raised $12.49.

Cesar raised $47.49.

Carmen raised $35.37.

To know more about relationships,visit:

https://brainly.com/question/14309670

#SPJ11

No, it is not a probability function because ∫f(x) dx ≠ 1.

To check if F(x) = x on [0, 6] is a probability density function, we need to verify two conditions:

1. f(x) ≥ 0 for all x in the domain.
2. ∫f(x) dx = 1 over the domain [0, 6].

For F(x) = x on [0, 6], the first condition is satisfied because x is greater than or equal to 0 in this interval. However, to check the second condition, we calculate the integral:

∫(from 0 to 6) x dx = (1/2)x² (evaluated from 0 to 6) = (1/2)(6²) - (1/2)(0²) = 18.

Since ∫f(x) dx = 18 ≠ 1, F(x) is not a probability density function.

To know more about probability density function click on below link:

https://brainly.com/question/30403935#

#SPJ11

Answer: 20/60 which simplifies to 1/3

Step-by-step explanation:

Answer: ?=20

Step-by-step explanation:

The surface area of the lamp, given the various dimensions, can be found to be 3, 140 cm ² .

Find surface area of cylinder :

= 2 x π x r x h

= 2 x π x 20 x 10

= 1, 257.14 cm ²

Then , the lateral surface of the cone :

= π x r x length

= π x 20 x 30

= 1, 885 . 71 cm ²

The total surface area is :

= 1, 257.14 + 1, 885. 71

= 3, 142 . 85 cm ²

Find out more on area at https://brainly.com/question/27812847

#SPJ1

The line integral of F along the given curve, we can split it into two parts: the line segment from (0, 0, π) to (1, 1, π), and the parabolic segment from (1, 1, π) to (3, 1, 9π).

Let's calculate each part separately:

Parametrize the line segment from (0, 0, π) to (1, 1, π) using t as the parameter:

r(t) = (t, t, π), where 0 ≤ t ≤ 1.

Calculate dr/dt:

dr/dt = (dx/dt, dy/dt, dz/dt) = (1, 1, 0).

Substitute the values of F and dr into the line integral formula:

∫ F · dr = ∫ [(y e^(xy)) dx + (x e^(xy)) dy + (cos z) dz]

         = ∫ [(t e^(t^2)) + (t e^(t^2)) + (cos π) * 0] dt

         = 2 ∫ (t e^(t^2)) dt    (Integrating with respect to t from 0 to 1)

To solve this integral, we can use the substitution u = t^2:

du = 2t dt

Substituting back:

∫ (t e^(t^2)) dt = 1/2 ∫ e^u du   (Integrating with respect to u)

                = 1/2 e^u + C

Substituting u = t^2:

                = 1/2 e^(t^2) + C

Evaluate the integral from 0 to 1:

∫ F · dr = 1/2 e^(1^2) + C - 1/2 e^(0^2) - C

         = 1/2 e - 1/2

2. Parabolic Segment:

Parametrize the parabolic segment from (1, 1, π) to (3, 1, 9π) using t as the parameter:

r(t) = (t, 1, πt^2), where 1 ≤ t ≤ 3.

Calculate dr/dt:

dr/dt = (dx/dt, dy/dt, dz/dt) = (1, 0, 2πt).

Substitute the values of F and dr into the line integral formula:

∫ F · dr = ∫ [(y e^(xy)) dx + (x e^(xy)) dy + (cos z) dz]

         = ∫ [1 * e^(t * 1 * t) + t * e^(t * 1 * t) + cos(πt^2) * 2πt] dt

         = ∫ (e^(t^2) + t^2 e^(t^2) + 2πt cos(πt^2)) dt

To evaluate this integral, we need to find the antiderivatives for each term. This step involves integration techniques and is specific to each term in the integral.

After evaluating the integral for the parabolic segment, you will obtain a numeric result.

Finally, add the results from the line segment and the parabolic segment to get the total line integral value.

Hence, the answer to the line integral ∫ F · dr is the sum of the line integral over the line segment and the line integral over the par

To know more fundamental theorem , refer here :

https://brainly.com/question/30761130#

#SPJ11

Thus, the wind speed at 80 meters is approximately 8.74 m/s when the wind speed at 60 meters is 8 m/s and the shear exponent is 1/7.

In order to find the wind speed at 80 meters, we need to use the shear exponent. The industry standard for the shear exponent is 1/7, which means that the wind speed will decrease by a factor of 1/7 for every meter increase in height.

To calculate the wind speed at 80 meters, we can use the following formula:

Wind speed at 80m = Wind speed at 60m * (80/60)^(1/7)

Plugging in the given values, we get:

Wind speed at 80m = 8 * (80/60)^(1/7)
Wind speed at 80m = 8 * 1.092
Wind speed at 80m = 8.74 m/s

Therefore, the wind speed at 80 meters is approximately 8.74 m/s when the wind speed at 60 meters is 8 m/s and the shear exponent is 1/7.

It's important to note that the shear exponent can vary depending on the atmospheric conditions, terrain, and other factors. So, this calculation provides an estimate based on the given standard.

Know ore about the exponent

https://brainly.com/question/13669161

#SPJ11

PQ has an inverse, namely (Q^(-1)P^(-1)), and is therefore invertible.

To show that matrices P and Q are invertible if and only if their product PQ is invertible, we need to demonstrate both directions of the statement.

Direction 1: P and Q are invertible implies PQ is invertible.

Assume that P and Q are invertible matrices of size n × n. This means that both P and Q have inverse matrices, denoted as P^(-1) and Q^(-1), respectively.

To show that PQ is invertible, we need to find the inverse of PQ. We can express it as follows:

(PQ)(Q^(-1)P^(-1))

By the associativity of matrix multiplication, we have:

P(QQ^(-1))P^(-1)

Since Q^(-1)Q is the identity matrix I, the expression simplifies to:

P(IP^(-1)) = PP^(-1) = I

Thus, PQ has an inverse, namely (Q^(-1)P^(-1)), and is therefore invertible.

To learn more about Invertible Matrix

https://brainly.com/question/22004136

#SPJ11