The wavelength of light incident on a platinum target that will release electrons with a maximum speed of 1.63 x 10^6 m/s is approximately: 111 nm.
The wavelength of light that can release electrons with a maximum speed of 1.63 x 10^6 m/s from a platinum target can be calculated using the photoelectric effect equation:
E = hν - Φ
where E is the energy of the incident photon,
h is Planck's constant,
ν is the frequency of the incident radiation, and
Φ is the work function of the metal (the minimum energy required to release an electron from its surface).
The maximum kinetic energy of the released electrons is given by:
KEmax = 1/2mv^2
where m is the mass of the electron and
v is its velocity.
Since KEmax = E - Φ, we can rearrange the equation to find the energy of the incident photon:
E = KEmax + Φ
Substituting the given values:
KEmax = 1.63 x 10^6 J/mol
Φ (for platinum) = 6.35 eV = 1.02 x 10^-18 J
h = 6.626 x 10^-34 J s
E = (1.63 x 10^6 J/mol) + (1.02 x 10^-18 J) = 1.79 x 10^-18 J
Now we can solve for the frequency of the incident radiation:
E = hν
ν = E/h = (1.79 x 10^-18 J)/(6.626 x 10^-34 J s) = 2.7 x 10^15 Hz
Finally, we can convert frequency to wavelength using the equation:
c = λν
where c is the speed of light in a vacuum (3.00 x 10^8 m/s).
λ = c/ν = (3.00 x 10^8 m/s)/(2.7 x 10^15 Hz) = 111 nm (rounded to three significant figures).
To know more about "Photoelectric effect" refer here:
https://brainly.com/question/26465043#
#SPJ11
Two positive point charges, both of magnitude 4.0x106c, are situated along the x-axis at x --2.0m and xy +2.0m. Wha the electric potential at the origin of the xy - coordinate system? 3.6*10* v -1.8x10^v OV 1.8*10* v 3.6x10v
The electric potential at the origin of the xy-coordinate system due to two positive point charges, both of magnitude 4.0x10^6C, situated along the x-axis at x=-2.0m and x=2.0m is 0.
To calculate the electric potential at the origin, we first need to find the electric potential due to each charge separately. Using the formula for electric potential due to a point charge V=kQ/r, where k is Coulomb's constant, Q is the magnitude of the charge, and r is the distance from the charge to the point where the potential is being calculated, we can calculate the electric potential due to each charge as follows:
V1=k(4.0x10^6)/2.0=2.16x10^7V
V2=k(4.0x10^6)/2.0=2.16x10^7V
Since the charges are of the same magnitude and opposite signs, their electric potentials cancel out at the origin, resulting in a net electric potential of 0. Therefore, the correct answer is 0.
To know more about electric potential, click here;
https://brainly.com/question/12645463
#SPJ11
part a find the gravitational potential energy of an 79 kg person standing atop mt. everest at an altitude of 8848 m. use sea level as the location for y=0.
The gravitational potential energy of a 79 kg person standing atop Mt. Everest at an altitude of 8,848 m is approximately 6.12 x 10^7 J.
The gravitational potential energy (GPE) of an object is given by the formula GPE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above some reference point. In this case, we are given that the person has a mass of 79 kg and is standing atop Mt. Everest at an altitude of 8,848 m above sea level, which we can use as our reference point (i.e., y=0).
We can find the acceleration due to gravity at this altitude using the formula g' = (GM)/(r+h)^2, where G is the gravitational constant, M is the mass of the Earth, r is the radius of the Earth, and h is the height of the person above the Earth's surface. Plugging in the appropriate values, we get g' ≈ 9.760 m/s^2.
Using this value of g', we can now calculate the GPE of the person using the formula GPE = mgh. Plugging in the values we have, we get GPE ≈ (79 kg)(9.760 m/s^2)(8,848 m) ≈ 6.12 x 10^7 J. Therefore, the gravitational potential energy of the person is approximately 6.12 x 10^7 J.
Learn more about gravitational potential energy here:
https://brainly.com/question/23134321
#SPJ11
if the coefficient of static friction between the tires and the road is μs = 0.5, determine the maximum safe speed so no slipping occurs. neglect the size of the car.
The maximum safe speed to prevent slipping can be determined using the coefficient of static friction (μs = 0.5).
What is the maximum safe speed?The coefficient of static friction (μs) represents the frictional force between two surfaces in contact when they are at rest relative to each other. To determine the maximum safe speed without slipping, we need to equate the frictional force (static friction) to the centripetal force.
The centripetal force is given by the equation Fc = m * v² / r, where m is the mass of the car, v is the velocity, and r is the radius of the curve. The frictional force (Fs) can be calculated as Fs = μs * m * g, where g is the acceleration due to gravity.
To prevent slipping, the maximum safe speed occurs when the frictional force is equal to the centripetal force. By equating Fs to Fc and rearranging the equation, we can solve for the maximum safe speed (v). Neglecting the size of the car, we can calculate the maximum safe speed using the given coefficient of static friction (μs = 0.5).
Learn more about force
brainly.com/question/30507236
#SPJ11
a.) What is the de Broglie wavelength of a 200g baseball witha speed of 30m/s?
b.) What is the speed of a 200g baseball with a de Brogliewavelength of 0.20nm?
a)The de Broglie wavelength of a 200g baseball moving at a speed of 30 m/s is approximately 1.104 × 10^(-34) meters.
To calculate the de Broglie wavelength of a baseball, we can use the following formula:
λ = h / p
where:
λ is the de Broglie wavelength,
h is the Planck's constant (approximately 6.62607015 × 10^(-34) m^2 kg / s),
p is the momentum of the baseball.
The momentum (p) can be calculated as the product of the mass (m) and the velocity (v):
p = m * v
Given that the mass (m) of the baseball is 200 grams, which is equal to 0.2 kilograms, and the speed (v) is 30 m/s, we can now calculate the de Broglie wavelength:
p = (0.2 kg) * (30 m/s) = 6 kg·m/s
λ = (6.62607015 × 10^(-34) m^2 kg / s) / (6 kg·m/s)
λ ≈ 1.104 × 10^(-34) meters
Therefore, the de Broglie wavelength of a 200g baseball moving at a speed of 30 m/s is approximately 1.104 × 10^(-34) meters.
b) The speed of a 200g baseball with a de Broglie wavelength of 0.20 nm is approximately 1.657 × 10^(-24) m/s.
To calculate the speed of the baseball with a given de Broglie wavelength, we can rearrange the formula:
p = h / λ
First, let's convert the given de Broglie wavelength of 0.20 nm to meters:
λ = 0.20 nm = 0.20 × 10^(-9) m
Now we can use the formula to calculate the momentum (p):
p = (6.62607015 × 10^(-34) m^2 kg / s) / (0.20 × 10^(-9) m)
p ≈ 3.313 × 10^(-25) kg·m/s
To find the speed (v), we divide the momentum (p) by the mass (m):
v = p / m
v = (3.313 × 10^(-25) kg·m/s) / (0.2 kg)
v ≈ 1.657 × 10^(-24) m/s
Therefore, the speed of a 200g baseball with a de Broglie wavelength of 0.20 nm is approximately 1.657 × 10^(-24) m/s.
To know more about de Broglie wavelength refer here
https://brainly.com/question/17295250#
#SPJ11
A balloon has a volume of 1.80 liters at 24.0°C. The balloon is heated to 48.0°C. Calculate the new volume of the balloon. O a. 1.95 L Ob. 1.80 L O c. 1.67 L O d. 3.60 L Oe. 0.90 L >> Question 4 of 5 > Moving to another question will save this response.
The new volume of the balloon when heated to 48.0°C is approximately 1.95 L (option a).
To calculate the new volume of the balloon when it is heated, we can use the formula derived from Charles's Law, which states that for a given amount of gas at constant pressure, the volume is directly proportional to its temperature in Kelvin.
The formula is V1/T1 = V2/T2, where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.
First, we need to convert the temperatures from Celsius to Kelvin:
T1 = 24.0°C + 273.15 = 297.15 K
T2 = 48.0°C + 273.15 = 321.15 K
Now, we can plug in the values into the formula:
V1 = 1.80 L (given)
T1 = 297.15 K
T2 = 321.15 K
1.80 L / 297.15 K = V2 / 321.15 K
Solving for V2, we get:
V2 = (1.80 L * 321.15 K) / 297.15 K
V2 ≈ 1.95 L
Learn more about volume here:-
https://brainly.com/question/28937336
#SPJ11
A star remains at constant size and temperature for a long period
of time. Which of the following is most likely to be true? The star generates
more energy than it radiates into space.
about as much energy as it radiates.
less energy than it radiates into space.
If a star remains at a constant size and temperature for a long period of time, it is most likely to be true that the star generates about as much energy as it radiates.
If a star remains at a constant size and temperature for an extended period, it suggests that the star is in a state of equilibrium. In such a state, the energy generated by the star's internal processes, such as nuclear fusion, is balanced by the energy radiated into space. This equilibrium is crucial for maintaining the star's stability and preventing it from expanding or contracting over time. If the star were to generate more energy than it radiates, it would accumulate excess energy and eventually experience an imbalance, causing changes in size, temperature, or both. Likewise, if the star generated less energy than it radiates, it would gradually deplete its internal energy reserves. Therefore, the most likely scenario is that the star generates about as much energy as it radiates, maintaining a steady state.
Learn more about energy radiated here:
https://brainly.com/question/14007126
#SPJ11
To finance the purchase of an electric guitar and amplifier from Leon's Guitars, Milo signs an instrument promising to pay to "National Lenders" $1,800 with interest in installments with the final payment due August 15, 2014. To be negotiable, this instrument must include on its face
a. any conditions on the sale of the goods.
b. no conditions.
c. any conditions to the repayment of the loan.
d. any conditions to the disbursement of the funds
To be negotiable, this instrument must include on its face no conditions. The correct option is b.
In the context of negotiable instruments, such as promissory notes, there are certain requirements that must be met for the instrument to be legally negotiable. One of these requirements is that the instrument must be unconditional on its face. This means that the instrument must not contain any conditions or qualifications that would affect the holder's right to payment.
In the case of Milo's promissory note to National Lenders, the note promises to pay a specific sum of money with interest in installments, with the final payment due on a specific date. This is an unconditional promise to pay, and there are no conditions or qualifications that would affect National Lenders' right to payment. Therefore, the instrument meets the requirement of being unconditional on its face and is negotiable.
It is worth noting that there may be other conditions or qualifications related to the sale of the goods or the repayment of the loan that are not included on the face of the instrument. However, as long as these conditions do not affect the holder's right to payment, they do not affect the negotiability of the instrument.
Hence, b. is the correct option.
To know more about negotiable instruments, refer to the link below:
https://brainly.com/question/28326209#
#SPJ11
when astronomers began searching for extrasolar planets, they were surprised to discover jupiter-sized planets much closer than 1 au from their parent stars. why is this surprising?
The discovery of Jupiter-sized planets much closer than 1 au from their parent stars was surprising to astronomers because according to the current understanding of planetary formation, such large gas giants should not be able to form so close to their stars due to the intense heat and radiation.
Additionally, the detection of these planets using the radial velocity method was difficult as the wobble of the star caused by the planet's gravitational pull is smaller when the planet is closer to the star. Therefore, the discovery of these "hot Jupiters" challenged astronomers' assumptions about planetary formation and the conditions required for the existence of extrasolar planets.
To learn more about extrasolar planets https://brainly.com/question/14018668
#SPJ11
A 5. 69x10^-2kg tennis ball moves at a speed of 13m/s. Then the ball is struck by a racket, causing it to rebound in the opposite direction at a speed of 18m/s. What is the change in the ball's momentum
Explanation:
The change in an object's momentum is equal to the final momentum minus the initial momentum.
The momentum of an object is given by the product of its mass and velocity:
Initial momentum = mass * initial velocity
Final momentum = mass * final velocity
Given:
Mass of the tennis ball = 5.69x10^-2 kg
Initial velocity = 13 m/s
Final velocity = -18 m/s (opposite direction)
Let's calculate the initial momentum and final momentum:
Initial momentum = (5.69x10^-2 kg) * (13 m/s)
Final momentum = (5.69x10^-2 kg) * (-18 m/s)
Now, let's calculate the change in momentum:
Change in momentum = Final momentum - Initial momentum
Plugging in the values:
Change in momentum = [(5.69x10^-2 kg) * (-18 m/s)] - [(5.69x10^-2 kg) * (13 m/s)]
Performing the calculation will give you the change in the ball's momentum.
Hope I helped
how can electrical energy be determined from a plot of power versus time
To determine electrical energy from a plot of power versus time, you can integrate the power over time. The integral of power with respect to time gives you the total energy consumed or produced.
Here are the steps to determine electrical energy from a plot of power versus time:
1. Obtain a plot of power (P) as a function of time (t).
2. Identify the area under the power-time curve.
3. Calculate the integral of power with respect to time (∫P dt) over the desired time interval.
4. Evaluate the integral to find the numerical value of energy.
If the power values in the plot are constant over different time intervals, you can simply calculate the energy for each interval by multiplying the constant power by the duration of that interval.
Keep in mind that the unit of power should be consistent throughout the calculation (e.g., watts, kilowatts), and the resulting energy value will be in units such as joules or watt-hours (Wh) depending on the units used for power and time.
To know about determining electrical energy refer here
https://brainly.com/question/29562686#
#SPJ11
pre-lab preparation sheet for lab 1-introduction to light. 1. What is waving in an electromagnetic wave? 2. What is polarized light? 3. Why is wave optics needed to describe polarized light? What is the rotary motion probe used for in Activity 1-3? 5. How will you find the mathematical relationship between your data from Activity 1-3 for light intensity vs. angle?
All the answers as as follows:
1. An electromagnetic wave is a type of wave that is produced by the motion of electric and magnetic fields. The waves consist of oscillating electric and magnetic fields, which are perpendicular to each other and to the direction of the wave's propagation. These waves travel through a vacuum at the speed of light and have different properties depending on their wavelength and frequency.
2. Polarized light refers to light that has a specific polarization direction. This means that the electric field of the light waves oscillates in a single plane, rather than in all possible directions. Polarized light can be produced by passing unpolarized light through a polarizing filter, which only allows waves with a certain polarization direction to pass through.
3. Wave optics is needed to describe polarized light because the polarization direction of light is determined by the properties of the wave itself. This means that the behavior of polarized light can only be explained using wave optics, which is a branch of physics that deals with the wave-like behavior of light.
4. The rotary motion probe is used in Activity 1-3 to measure the angle of rotation of a polarizing filter. The probe is attached to the filter and is used to record the angle of rotation as the filter is turned.
5. To find the mathematical relationship between the data from Activity 1-3, you will need to plot the light intensity vs. the angle of rotation of the polarizing filter. This will produce a graph that shows how the intensity of the light changes as the filter is rotated. You can then use this graph to determine the mathematical relationship between the two variables, which will allow you to make predictions about how the intensity of the light will change for different angles of rotation.
To know more about Light visit:
https://brainly.com/question/16713206
#SPJ11
Part A A 500 lines per mm diffraction grating is illuminated by light of wavelength 620 nm What is the maximum diffraction order seen? For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution.
The maximum diffraction order seen is m = 3.
To find the maximum diffraction order seen for a 500 lines per mm diffraction grating illuminated by light of wavelength 620 nm, follow these steps:
Step 1: Convert lines per mm to lines per meter.
500 lines/mm = 500,000 lines/m
Step 2: Calculate the grating spacing (d) using the formula:
d = 1 / (lines per meter)
d = 1 / 500,000
d = 2 x 10^-6 m
Step 3: Use the diffraction formula to find the maximum order (m):
m * λ = d * sinθ
Since we want to find the maximum diffraction order, the angle θ will be at its maximum (90 degrees).
Therefore, sinθ = sin(90°) = 1.
Step 4: Solve for m:
m = (d * sinθ) / λ
m = (2 x 10^-6 * 1) / (620 x 10^-9)
m = 3.2258
Since the diffraction order must be an integer, the maximum diffraction order seen is m = 3.
Learn more about Diffraction https://brainly.com/question/13104464
#SPJ11
In an oscillating rlc circuit, r = 2.1 ω, l = 2.0 mh, and c = 200 µf. what is the angular frequency of the oscillations (in rad/s)?
In an oscillating RLC circuit with R = 2.1 Ω, L = 2.0 mH, and C = 200 µF, you are asked to determine the angular frequency of the oscillations (in rad/s).
To calculate the angular frequency (ω), we will use the formula for the resonance frequency (f) of an RLC circuit, which is given by:
f = 1 / (2π * √(L * C))
Where L is the inductance (2.0 mH) and C is the capacitance (200 µF). First, convert the given values into their base units:
L = 2.0 mH = 2.0 * 10^(-3) H
C = 200 µF = 200 * 10^(-6) F
Now, plug the values into the formula:
f = 1 / (2π * √((2.0 * 10^(-3) H) * (200 * 10^(-6) F)))
f ≈ 1 / (2π * √(4 * 10^(-9)))
f ≈ 1 / (2π * 2 * 10^(-4.5))
f ≈ 795.77 Hz
To find the angular frequency (ω), we use the relationship between angular frequency and frequency:
ω = 2π * f
ω = 2π * 795.77 Hz
ω ≈ 5000 rad/s
In conclusion, the angular frequency of the oscillations in the given oscillating RLC circuit is approximately 5000 rad/s.
To know more aboutoscillating RLC refer here
https://brainly.com/question/28259475#
#SPJ11
A series RLC circuit consists of a 100 O resistor, a 0.15 H inductor, and a 30 µF capacitor. The circuit is attached to a 120 V/60 Hz power line.
What are
(a) the peak current I,
(b) the phase angle f, and
(c) the average power loss?
Please be sure to draw a phasor diagram.
The peak current is 1.14 A
The phase angle is 17.7 degrees
The power lost is 130 W
What is the RLC circuit?The capacitive reactance is;
Xc = 1/2πfc
Xc = 1/2 * 3.14 * 60 * 30 * 10^-6
Xc = 88.5 ohm
XL = 2πfL
= 2 * 3.14 *60 * 0.15
= 56.5 ohm
Impedance;
Z = √R^2 + (XL - XC)^2
Z = √(100)^2 + (56.5 - 88.5)^2
Z = 105 ohm
I = V/Z
= 120V/105 Ohm
= 1.14 A
The phase angle is;
Tan-1 (XL - XC)/R
= Tan-1 (-32/100)
= 17.7 degrees
The average power loss is;
IV cosφ
= 1.14 * 120 8 Cos 17.7
= 130 W
Learn more about RLC circuit:https://brainly.com/question/29898671
#SPJ4
an elementary particle travels 60 km through the atmosphere at a speed of 0.9996c. according to the particle, how thick is the atmosphere?
An elementary particle travels 60 km through the atmosphere at a speed of 0.9996c. According to the particle, the thickness of the atmosphere is 32.4 km.
According to the particle, the length of the atmosphere it travels through is shortened due to time dilation and length contraction effects predicted by special relativity.
The proper length of the atmosphere (i.e., the length measured by a stationary observer on Earth) is L = 60 km.
The length contracted distance, as measured by the particle, is given by
L' = L / γ
Where γ is the Lorentz factor
γ = 1 / [tex]\sqrt{(1- v^{2} /c^{2} )[/tex]
Where v is the velocity of the particle and c is the speed of light.
Substituting the given values into the above equation, we get
γ = 1 / [tex]\sqrt{(1- (0.9996c)^{2} / c^{2} )[/tex]
γ = 1.854
Therefore, the length of the atmosphere as measured by the particle is
L' = L / γ
L' = 60 km / 1.854
L' ≈ 32.4 km
Therefore, according to the particle, the thickness of the atmosphere is 32.4 km.
To know more about thickness here
https://brainly.com/question/30764128
#SPJ4
A skateboarder is skating along a level concrete path. Every so often, to keep himself going, he uses his foot to give himself a push. Discuss why the skateboarder needs to regularly push with a foot when skateboarding along a level surface.
In your answer, you should:
- describe the motion of the skateboarder during a push and between pushes
- identify the forces in action and explain whether they are balanced or unbalanced
- link the net force to the motion of the skateboarder.
The skateboarder needs to regularly push with their foot when skateboarding along a level surface because of the presence of frictional forces that oppose motion. When the skateboarder gives themselves a push, they increase their forward velocity.
The skateboarder needs to regularly push with their foot when skateboarding along a level surface because of the presence of frictional forces that oppose motion. When the skateboarder gives themselves a push, they increase their forward velocity. However, over time, the velocity decreases due to the force of friction between the skateboard's wheels and the ground, which acts in the opposite direction to the skateboard's motion. During a push, the skateboarder exerts a force on the skateboard that propels it forward. Between pushes, the skateboard moves at a constant velocity due to the balanced forces acting upon it. However, as frictional forces act on the skateboard, it slows down until the next push is required. The net force acting on the skateboarder is unbalanced, as the force of friction acting against the skateboard's motion is greater than the force of the skateboarder's push. The resulting net force causes the skateboarder to slow down over time. Thus, by pushing themselves, the skateboarder overcomes the force of friction and maintains their forward motion.
For more question on frictional forces
https://brainly.com/question/24386803
#SPJ11
In order to start a fire, a camper turns a lens toward the sun to focus its rays on a piece of wood. The lens has a 18 cm
focal length
To start a fire, the camper uses a lens with an 18 cm focal length to focus the sun's rays on a piece of wood.
The focal length of a lens determines its ability to converge or diverge light. In this case, the camper wants to concentrate sunlight onto a specific point on the wood, raising its temperature enough to ignite a fire. By placing the lens between the sun and the wood, the lens refracts and converges the sun's rays, forming a focused spot on the wood's surface. The focal length of 18 cm indicates that the lens will converge the light at a distance of 18 cm from its surface. By adjusting the position of the lens, the camper can position the focused spot on the wood, generating enough heat to ignite it and start a fire.
Learn more about determines here:
https://brainly.com/question/31755910
#SPJ11
127. determine the power intensity of radiation per unit wavelength emitted at a wavelength of 500.0 nm by a blackbody at a temperature of 10,000 k.
The power intensity of radiation per unit wavelength emitted at a wavelength of 500.0 nm by a blackbody at a temperature of 10,000 K is 3.63 × 10⁻² W⋅m⁻²⋅nm⁻¹.
To determine the power intensity of radiation per unit wavelength emitted by a blackbody at a given temperature and wavelength, we can use Planck's law, which gives the spectral radiance of a blackbody as a function of its temperature and wavelength;
B(λ, T)=(2hc²/λ⁵) × 1/(exp(hc/λkT) - 1)
where; B(λ, T) is the spectral radiance of the blackbody at wavelength λ and temperature T
h is Planck's constant
c is the speed of light
k is the Boltzmann constant
To obtain the power intensity per unit wavelength, we need to multiply the spectral radiance by the wavelength and divide by the speed of light;
I(λ, T) = B(λ, T) × λ / c
Substituting λ = 500.0 nm
= 5.00 × 10⁻⁷ m and T
= 10,000 K, we get;
B(500.0 nm, 10,000 K) = (2hc²/λ⁵) × 1/(exp(hc/λkT) - 1)
= 1.09 × 10⁸ W⋅m⁻²⋅sr⁻¹⋅m⁻¹
I(500.0 nm, 10,000 K)
= B(500.0 nm, 10,000 K) × λ / c
= 3.63 × 10⁻² W⋅m⁻²⋅nm⁻¹
Therefore, the power intensity is 3.63 × 10⁻² W⋅m⁻²⋅nm⁻¹.
To know more about power intensity here
https://brainly.com/question/21505382
#SPJ4
. Because angular momentum must be conserved, as a gas cloud contracts due to gravity it will also
a. spin slower.
b. spin faster.
c. increase in temperature.
d. decrease in temperature.
e. stay the same temperature.
Because angular momentum must be conserved, as a gas cloud contracts due to gravity, it will spin faster. The correct answer is (b)
This is due to the conservation of angular momentum, which states that the product of the angular velocity and the moment of inertia of an object must remain constant if there is no net external torque acting on it.
As the cloud contracts, its moment of inertia decreases, so in order to conserve angular momentum, the angular velocity (spin rate) of the cloud must increase.
This is similar to what happens when an ice skater pulls in their arms while spinning - they spin faster to conserve their angular momentum. Therefore, the correct answer is (b) spin faster.
For more question on angular momentum click on
https://brainly.com/question/4126751
#SPJ11
b. spin faster.
This is because as the gas cloud contracts due to gravity, its radius decreases, which means its moment of inertia decreases. In order for angular momentum to be conserved, the cloud must spin faster to compensate for the decrease in moment of inertia.
As a gas cloud contracts due to gravity, it needs to conserve angular momentum. To do this, the cloud will spin faster. This is because angular momentum (L) is given by the formula L = Iω, where I is the moment of inertia and ω is the angular velocity. As the cloud contracts, its moment of inertia (I) decreases, so to maintain constant angular momentum (L), the angular velocity (ω) must increase, causing the gas cloud to spin faster.
Learn more about gas cloud here : brainly.com/question/9080971
#SPJ11
When a flea (m=450 μg) is jumping up, it extends its legs 0.5 mm and reaches a speed of 1 m/s in that time. How high can this flea jump? Ignore air drag and use g=10 m/s2.
The maximum height that a flea can jump can be determined using conservation of energy. The flea can jump up to a height of about 5 cm.
The potential energy at the maximum height is equal to the initial kinetic energy. The initial kinetic energy is given by (1/2)mv², where m is the mass of the flea and v is its velocity.
First, we need to convert the mass of the flea from micrograms to kilograms, which gives m = 450 × 10⁻⁶ kg. The velocity of the flea is given as 1 m/s. Thus, the initial kinetic energy of the flea is given by (1/2) × 450 × 10⁻⁶ × (1 m/s)² = 0.225 × 10⁻³ J.
At maximum height, the kinetic energy of the flea is zero, and all its energy is in the form of potential energy. The potential energy at maximum height is given by mgh, where h is the maximum height. Equating the initial kinetic energy to the potential energy at maximum height, we get: 0.225 × 10⁻³ J = (450 × 10⁻⁶ kg) × (10 m/s²) × h
Simplifying, we get h = 0.0495 m, which is approximately 5 cm.
To know more about conservation of energy, refer here:
https://brainly.com/question/2137260#
#SPJ11
In an L-C circuit, L-85.0 mH and C- 3.20 uF During the oscillations the maximum current in the inductor is 0.850 mA. (a) What is the maximum charge on the capacitor? (b) What is the magnitude of the charge on the capacitor at an instant when the current in the inductor has magnitude 0.500 mA?
The maximum charge on the capacitor is 0.185 μC and the charge on the capacitor at an instant when the current in the inductor is 0.500 mA will be 0.109 μC.
(a) We can calculate [tex]Q_{max}[/tex] by using the equation [tex]Q_{max} =C*V_{max}[/tex].
Given C = 3.20μF
And we know, [tex]V_{max} = I_{max} * XL[/tex]
Here, Inductive reactance(XL) = 2πfL, where f is the resonant frequency.
We know,[tex]f=\frac{1}{2\pi \sqrt{LC} }[/tex]
So, f = 1 / [2π√(85.0 mH * 3.20 μF)] = 1.28 kHz
∴ Inductive reactance(XL) = 2πfL
= 2π * 1.28 kHz * 85.0 mH = 68.3 Ω
Now, [tex]V_{max} = I_{max} * XL[/tex]
∴ Vmax = 0.850 mA * 68.3 Ω = 58.05 mV
Finally, the maximum charge on the capacitor can be calculated as,
Qmax = C * Vmax
= 3.20 μF * 58.05 mV
= 0.185 μC
Therefore, the maximum charge on the capacitor is 0.185 μC.
(b) When the current in the inductor has a magnitude of 0.500 mA, the voltage across the inductor will be,
V = I * XL
= 0.500 mA * 68.3 Ω
= 34.15 mV
Now the charge at required instant i.e., when I = 0.500 mA
Q = C * V
= 3.20 μF * 34.15 mV
= 0.109 μC.
Therefore, the magnitude of the charge on the capacitor at an instant when the current in the inductor has magnitude 0.500 mA is 0.109 μC.
Learn more about capacitor here
brainly.com/question/24212501
#SPJ4
a certain metal has a work function of 4.00 ev. what is the minimum frequency of light that will cause electrons to be emitted from the metal when the light shines on it? _______ hz
The minimum frequency of light needed to release electrons from the metal is approximately 9.67 x [tex]10^1^4[/tex]Hz.
What is the minimum frequency of light required to emit electrons from the metal?The minimum frequency of light required to cause electrons to be emitted from a metal can be found by using equation:
E = hf
where E is the energy of a single photon, h is Planck's constant (6.626 x [tex]10^-^3^4[/tex] J·s), and f is the frequency of light.
The work function, denoted by φ, is the minimum energy required to remove an electron from the metal. In this case, the work function is given as 4.00 eV.
We need to convert the work function from electron volts (eV) to joules (J) since Planck's constant is in joules. The conversion factor is 1 eV = 1.602 x [tex]10^-^1^9[/tex]J.
Therefore, the work function in joules is:
φ = 4.00 eV × (1.602 x [tex]10^-^1^9[/tex] J/eV) = 6.408 x[tex]10^-^1^9[/tex]J
We can equate the energy of a single photon to the work function
E = φ
hf = φ
From this equation, we can solve for the frequency f:
f = φ / h
Substituting the values:
f = (6.408 x [tex]10^-^1^9[/tex]J) / (6.626 x [tex]10^-^3^4[/tex]J·s)
f ≈ 9.67 x 1[tex]0^1^4[/tex]Hz
Therefore, the minimum frequency of light required to cause electrons to be emitted from the metal is approximately 9.67 x[tex]10^1^4[/tex] Hz.
Learn more about frequency
brainly.com/question/29739263
#SPJ11
The potential difference between two short sections of parallel wire in air is 14 V. They carry equal and opposite charges of magnitude 85 pC. What is the capacitance of the two wires?
The capacitance of the two wires is approximately 6.07 pF (pico-Farads).
To find the capacitance of the two wires, we'll use the formula for capacitance, which is:
Capacitance (C) = Charge (Q) / Potential Difference (V)
Given the information in your question, we have:
Charge (Q) = 85 pC (pico-Coulombs) = 85 x 10^(-12) C (Coulombs)
Potential Difference (V) = 14 V
Now we can calculate the capacitance:
C = (85 x 10^(-12) C) / (14 V)
C ≈ 6.07 x 10^(-12) F (Farads)
So, the capacitance of the two wires is approximately 6.07 pF (pico-Farads).
To learn more about wires, refer below:
https://brainly.com/question/12984460
#SPJ11
You pushed a shopping cart with a 85 N force. The mass of the cart is 37 kg. What is the acceleration of the shopping cart?
The acceleration of a shopping cart pushed with a 85 N force, considering its mass of 37 kg, can be calculated using Newton's second law of motion.
According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. The formula for calculating acceleration is given by a = F/m, where "a" represents acceleration, "F" denotes the net force, and "m" represents the mass of the object.
In this case, the net force acting on the shopping cart is 85 N, and its mass is 37 kg. Plugging these values into the formula, we can calculate the acceleration as follows:
a = F/m
= 85 N / 37 kg
≈ 2.30 m/s²
Therefore, the acceleration of the shopping cart is approximately 2.30 m/s² when a force of 85 N is applied to it.
Learn more about Newton's laws of motion here:
https://brainly.com/question/974124
#SPJ11
calculate the requency of the photon emitted when the electron in a hydrogen atom drops from energy level e6 to energy level e3 What is the frequency of the emitted photon, and in which range of the the electromagnetic spectrum is this photon?
The frequency of the photon emitted when the electron in a hydrogen atom drops from energy level E6 to E3 is 4.56 x 10¹⁴ Hz. The emitted photon falls in the ultraviolet range of the electromagnetic spectrum.
The energy change of an electron in a hydrogen atom dropping from energy level n=6 to n=3 is given by:
ΔE = E6 - E3 = -13.6 eV[(1/3²) - (1/6²)] = -1.89 eV
The frequency of the emitted photon can be calculated using the Planck-Einstein equation:
E = hf, where E is the energy of the photon, h is Planck's constant (6.626 x 10⁻³⁴ J s), and f is the frequency of the photon.
Converting the energy change to joules:
ΔE = -1.89 eV x 1.6 x 10⁻¹⁹ J/eV = -3.02 x 10⁻¹⁹ J
Solving for f:
f = E/h = (-3.02 x 10⁻¹⁹ J) / (6.626 x 10⁻³⁴ J s) = 4.56 x 10¹⁴ Hz
The frequency of the emitted photon is 4.56 x 10¹⁴ Hz, which corresponds to the range of the electromagnetic spectrum known as ultraviolet (UV).
To know more about the frequency refer here :
https://brainly.com/question/14316711#
#SPJ11
The intensity of solar radiation at the top of Earth's atmosphere is 1,370 W/m2. Assuming 60% of the incoming solar energy reaches Earth's surface and assuming you absorb 50% of the incident energy, make an order-of-magnitude estimate of the amount of solar energy you absorb in a 60-minute sunbath. (Assume that you occupy a 1.7-m by 0.3-m area of beach blanket and that the sun's angle of elevation is 60
You would absorb 8.5 ×[tex]10^{6}[/tex]J of solar energy in a 60-minute sunbath.
The amount of solar energy you absorb in a 60-minute sunbath can be estimated as follows:
Calculate the area of the beach blanket you occupy:
Area = length x width = (1.7 m) x (0.3 m) = 0.51 [tex]m^{2}[/tex]
Calculate the fraction of solar energy that reaches the surface of the Earth:
Fraction reaching Earth's surface = 60% = 0.6
Calculate the fraction of solar energy that you absorb:
Fraction absorbed = 50% = 0.5
Calculate the solar energy that you absorb per unit area:
Energy absorbed per unit area = (intensity of solar radiation at the top of Earth's atmosphere) x (fraction reaching Earth's surface) x (fraction absorbed)
Energy absorbed per unit area = (1,370 W/[tex]m^{2}[/tex]) x (0.6) x (0.5) = 411 W/[tex]m^{2}[/tex]
Calculate the solar energy you absorb in a 60-minute sunbath:
Energy absorbed = (energy absorbed per unit area) x (area of beach blanket) x (time)
Energy absorbed = (411 W/[tex]m^{2}[/tex]) x (0.51 [tex]m^{2}[/tex]) x (60 min x 60 s/min) = 8,466,120 J
Therefore, you would absorb approximately 8.5 ×[tex]10^{6}[/tex] J of solar energy in a 60-minute sunbath. Note that this is an order-of-magnitude estimate and the actual value may be different due to various factors such as the actual solar radiation intensity, the actual fraction of solar energy reaching Earth's surface, and the actual fraction of solar energy absorbed by your body, among others.
know more about solar energy here:
https://brainly.com/question/30134980
#SPJ11
a 7.66-nc charge is located 1.93 m from a 4.54-nc point charge.(a) find the magnitude of the electrostatic force that one charge exerts on the other.n(b) is the force attractive or repulsive?attractive repulsive
The magnitude of the electrostatic force between the two charges is approximately 5.29 x 10^-5 N. The force between these two charges is attractive.
(a) To find the magnitude of the electrostatic force between the two charges, we can use Coulomb's Law which states
that the force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, this can be expressed as:
F = k * (q1 * q2) / r^2
Where F is the electrostatic force, k is Coulomb's constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the charges in Coulombs, and r is the distance between the charges in meters.
Plugging in the given values, we get:
F = 9 x 10^9 * [(7.66 x 10^-9) * (4.54 x 10^-9)] / (1.93)^2
F ≈ 5.29 x 10^-5 N
Therefore, the magnitude of the electrostatic force between the two charges is approximately 5.29 x 10^-5 N.
(b) To determine if the force is attractive or repulsive, we need to look at the signs of the charges. In this case, one charge is positive (7.66 nc) and the other is negative (4.54 nc). Opposite charges attract each other, while like charges repel each other. Therefore, the force between these two charges is attractive.
Learn more about electrostatic force here:-
https://brainly.com/question/31042490
#SPJ11
A sample of 238/92U is decaying at a rate of 450 decays/s . The half-life is 4.468×109yr.
What is the mass of the sample?
Express your answer to three significant figures and include the appropriate units.
The mass of the sample of 238/92U is 0.401 kg.
First, we can use the decay constant (λ) formula to calculate the decay rate:
[tex]λ = ln(2)/t1/2 = ln(2)/(4.468×10^9 yr) ≈ 1.549 × 10^-10 /s[/tex]
Then, we can use the decay rate formula to find the number of atoms (N) in the sample:
[tex]N = (decay rate) / λ = 450 / (1.549 × 10^-10 /s) ≈ 2.906 × 10^12 atoms[/tex]
Finally, we can use the atomic mass of 238/92U (which is approximately 238 g/mol) to calculate the mass of the sample:
mass = N × (atomic mass) = 2.906 × 10^12 atoms × (238 g/mol / 6.022 × 10^23 atoms/mol) ≈ 0.401 kg
Therefore, the mass of the sample is 0.401 kg (to three significant figures).
Learn more about significant here:
https://brainly.com/question/31037173
#SPJ11
what is the energy released when 100kg of deuterium and 150kg of tritium are consumed in one year in a fusion reactor
The energy released when 100 kg of deuterium and 150 kg of tritium are consumed in one year in a fusion reactor is approximately 8.4 x 10^16 joules.
Fusion reactions release energy according to Einstein's mass-energy equivalence formula (E=mc^2), where m is the mass difference between the reactants and products, and c is the speed of light. Deuterium-tritium fusion is one of the most promising reactions for practical fusion power. It releases more energy per reaction compared to other fusion reactions, making it an attractive choice for future fusion reactors. The energy released when 100 kg of deuterium and 150 kg of tritium are consumed in one year in a fusion reactor is approximately 8.4 x 10^16 joules.
learn more about energy here:
https://brainly.com/question/1932868
#SPJ11
The moment of inertia of the rotor of the medical centrifuge is I = 0.2 kg-m^2. The rotor starts from rest and the motor exerts a constant torque of 0.8 N-m on it. (a) How much work has the motor done on the rotor when the rotor has rotated through four revolutions? (b) What is the rotor's angular velocity (in rpm) when it has rotated through four revolutions?
(a) The motor has done 25.12 J of work on the rotor when it has rotated through four revolutions.
(b) The rotor's angular velocity is approximately 167.55 rpm when it has rotated through four revolutions.
To calculate the work done by the motor on the rotor, we use the formula W = τΔθ, where W is the work done, τ is the torque exerted by the motor, and Δθ is the angle through which the rotor has rotated. Since the rotor has rotated through four revolutions, Δθ = 8π radians. Thus, W = 0.8 N-m × 8π rad = 25.12 J.
To calculate the angular velocity of the rotor, we use the formula ω = Δθ/Δt, where ω is the angular velocity, Δθ is the angle through which the rotor has rotated, and Δt is the time taken to rotate through that angle. Since the rotor has rotated through four revolutions, Δθ = 8π radians. The time taken can be calculated from the formula Δθ = ωt. Rearranging this formula, we get t = Δθ/ω. Substituting the values, we get t = 8π/ω. We know that one revolution is equal to 2π radians, so four revolutions is equal to 8π radians. Therefore, t = 4/ω. Substituting this value of t in the formula for ω, we get ω = Δθ/t = (8π)/(4/ω) = 2ωπ. Solving for ω, we get approximately 167.55 rpm.
Learn more about values here:
https://brainly.com/question/30145972
#SPJ11