Given the following reaction at equilibrium, if Kc = 1.90 × 1019 at 25.0 °C, Kp = ________.H2 (g) + Br2 (g) 2 HBr (g)A) 5.26 × 10-20B) 1.56 × 104C) 6.44 × 105D) 1.90 × 1019E) none of the above

The mass of KCl needed to prepare 1000 ml of a 1.50 M solution is 173.65 grams.

To compute the mass of KCl needed, we need to use the formula:
mass (in grams) = moles x molar mass
First, we need to calculate the number of moles of KCl required for a 1.50 M solution:
1.50 mol/L x 1 L = 1.50 moles
The molar mass of KCl is 74.55 g/mol.

Using this information, we can calculate the mass of KCl needed:
mass = 1.50 moles x 74.55 g/mol = 173.65 grams
Therefore, 173.65 grams of KCl is required to prepare 1000 ml of a 1.50 M solution.

Learn more about moles here:

https://brainly.com/question/31597231

#SPJ11

We have demonstrated that if a is a primitive root modulo prime p, then the congruence [tex]$l_{a(b_1b_2)} \equiv l_{a(b_1)} + l_{a(b_2)} \pmod{p-1}$[/tex] holds for any positive integers [tex]b_1[/tex] and [tex]b_2[/tex]. This result has important applications in number theory and cryptography.

Let's assume that a is a primitive root modulo prime p, and let [tex]b_1[/tex] and [tex]b_2[/tex] be two positive integers. We want to show that:

[tex]$l_{a(b_1b_2)} \equiv l_{a(b_1)} + l_{a(b_2)} \pmod{p-1}$[/tex]

First, note that by definition, a primitive root modulo p has order p-1. Therefore, [tex]$a^{p-1} \equiv 1 \pmod{p}$[/tex] Also, since a is a primitive root, we know that it generates all the non-zero residues modulo p. This means that for any non-zero residue x modulo p, we can write:

[tex]$x \equiv a^k \pmod{p}$[/tex]

for some integer k. Moreover, since a has order p-1, we know that k must be relatively prime to p-1, i.e., gcd(k, p-1) = 1.

Now, let's consider [tex]b_1b_2[/tex]. We can write:

[tex]$l_{a(b_1b_2)} = k_1 + k_2$[/tex]

where [tex]k_1[/tex] and [tex]k_2[/tex] are integers such that:

[tex]$b_1 \equiv a^{k_1} \pmod{p}$[/tex]

[tex]$b_2 \equiv a^{k_2} \pmod{p}$[/tex]

Using the properties of exponents, we can rewrite [tex]b_1b_2[/tex] as:

[tex]$b_1b_2 \equiv a^{k_1} \cdot a^{k_2} \equiv a^{k_1+k_2} \pmod{p}$[/tex]

Therefore, we have:

[tex]$l_{a(b_1b_2)} = k_1 + k_2 \equiv k_1 + k_2 + n(p-1) \pmod{p-1}$[/tex]

for some integer n. But since [tex]$\gcd(k_1, p-1) = \gcd(k_2, p-1) = 1$[/tex], we know that [tex]$\gcd(k_1+k_2, p-1) = 1$[/tex] as well. Therefore, we can apply Euler's theorem, which states that:

[tex]$a^{\varphi(p)} \equiv 1 \pmod{p}$[/tex]

where phi(p) is Euler's totient function, which equals p-1 for a prime p. This means that:

[tex]$a^{p-1} \equiv 1 \pmod{p}$[/tex]

Since [tex]k_ 1 + k_2[/tex] is relatively prime to p-1, we can write:

[tex]$a^{k_1+k_2} \equiv a^{k_1+k_2 \bmod (p-1)} \pmod{p}$[/tex]

So we have:

[tex]$l_{a(b_1b_2)} \equiv k_1 + k_2 \equiv k_1 + k_2 + n(p-1) \equiv l_{a(b_1)} + l_{a(b_2)} \pmod{p-1}$[/tex]

This completes the proof. Therefore, we have shown that if a is a primitive root modulo prime p, then for any positive integers [tex]b_1[/tex] and [tex]b_2[/tex], we have:

[tex]$l_{a(b_1b_2)} \equiv l_{a(b_1)} + l_{a(b_2)} \pmod{p-1}$[/tex]

To learn more about modulo

https://brainly.com/question/27976134

#SPJ4

The element which is present in the largest percent by mass is sulfur (S). Option D is correct. The amount of heat involved when 25.0 g of silver oxidizes is -14.4 kJ. The mass of K₂C₂0₄ is required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃ will be 0.748 g. Option C is correct.

In (NH₄)₂S₂O₃, the element present in the largest percent by mass is sulfur (S).

To calculate amount of heat evolved or absorbed when 25.0 g of silver oxidizes to form silver oxide (Ag₂O) under standard conditions according to given reaction;

4 Ag (s) + O₂ (g) → 2 Ag₂0 (s) ΔH°rxn = -62.10 kJ

We need to use the following formula;

q = n × ΔH°rxn

where q is the heat involved, n is number of moles of silver that react, and ΔH°rxn is the enthalpy change for the reaction.

First, we need to calculate the number of moles of silver (Ag);

n = mass / molar mass

n = 25.0 g / 107.87 g/mol = 0.2314 mol

Now we can substitute the values into formula;

q = 0.2314 mol × (-62.10 kJ/mol) = -14.4 kJ

Therefore, the amount of heat involved when 25.0 g of silver oxidizes is -14.4 kJ.

To determine the mass of K₂C₂0₄ required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃, we need to use the following formula;

n(K₂C₂O₄) = n(Fe(NO₃)₃) × (3/2)

where n is the number of moles of each substance, and the stoichiometric coefficients are used to relate the number of moles of K₂C₂O₄ to Fe(NO₃)₃.

First, we need to calculate the number of moles of Fe(NO₃)₃:

n(Fe(NO₃)₃) = concentration × volume

n(Fe(NO₃)₃) = 0.100 mol/L × 0.0300 L = 0.00300 mol

Now we can use the stoichiometry to calculate the number of moles of K₂C₂O₄;

n(K₂C₂O₄) = 0.00300 mol × (3/2) = 0.00450 mol

Finally, we can use the number of moles and the molar mass of K₂C₂O₄ to calculate the mass required;

mass = n × molar mass

mass = 0.00450 mol × 166.214 g/mol = 0.748 g

Therefore, the mass of K₂C₂0₄ required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃ is 0.748 g.

To know more about molar mass here

https://brainly.com/question/22997914

#SPJ4

The equilibrium molarity of ammonia after the 2nd addition of ammonia is 1.94181× 10⁻⁶ M.

The total number of moles of solute in a particular solution's molarity is expressed as moles of solute per litre of solution. As opposed to mass, which fluctuates with changes in the system's physical circumstances, the volume of a solution depends on changes in the system's physical conditions, such as pressure and temperature. M, sometimes known as a molar, stands for molarity. When one gramme of solute dissolves in one litre of solution, the solution has a molarity of one.

The balanced equation of reaction is given below;

HCl + NH₃ → NH₄Cl.

We are given the volume in milliliters, let us convert them into Litres;

= 38.30 × 10⁻³ Litres.

Here, we have an incomplete question (one parameter is missing- the volume of ammonia,NH₃). Therefore, we assume that the volume of Ammonia, NH₃ is 10mL(10× 10⁻³ Litres).

Step one: we need to calculate the number of moles of HCl.

Number of moles of HCl= molarity × volume.

Number of moles of HCl= 0.507 M × 38.30× 10⁻³ L.

Number of moles of HCl= 0.0194181 moles.

From the equation of reaction above, we have that one mole of ammonia is reacting with one mole of Hydrogen Chloride, HCl. Hence, the number of moles of ammonia is equal to the number of moles of Hydrogen Chloride, HCl.

Step two: calculate the molarity of Ammonia, NH₃.

The molarity of ammonia= number of moles of ammonia/ volume of Ammonia, NH₃.

Molarity of Ammonia= 0.0194181/10× 10⁻³ moles NH₃.

Molarity of Ammonia= 0.00000194181.

Molarity of Ammonia = 1.94181× 10⁻⁶ M.

Learn more about Molarity:

https://brainly.com/question/26528084

#SPJ4

The transfer of protons will continue until equilibrium is reached. The answr is proton transfer will continue until equilibrium is reached.

The given chemical equation represents an acid-base reaction between acetic acid (a weak acid) and water (a weak base) to form acetate ion and hydronium ion. This reaction involves the transfer of a proton from the acid to the base, resulting in the formation of two new species with different properties.

In this process, the transfer of protons will continue until equilibrium is reached, as stated in the first option. Equilibrium is a state where the rate of the forward reaction is equal to the rate of the reverse reaction, and the concentrations of the reactants and products remain constant over time.

At equilibrium, the concentration of hydronium ions (H3O+) and acetate ions (CH3COO-) will depend on the relative strength of the acid and base involved in the reaction, as well as the initial concentrations of the reactants.

It is important to note that proton transfer only proceeds in one direction, from the acid to the base, as stated in the third option. This is because the acid has a higher affinity for protons than the base, and the transfer of protons is energetically favorable in this direction. However, the reaction can still reach equilibrium, where the forward and reverse reactions occur simultaneously at equal rates.

The second option, which states that proton transfer will continue indefinitely, is incorrect. This is because the reaction will eventually reach equilibrium, where the rates of the forward and reverse reactions are equal and there is no net transfer of protons.

In conclusion, the correct statement about the process of proton transfer between acetic acid and water is that it will continue until equilibrium is reached, and the transfer of protons only proceeds in one direction, from the acid to the base.

To learn  more about equilibrium refer here:
https://brainly.com/question/30807709

#SPJ11

Answer: Proton transfer will continue indefinitely

Therefore, the cell potential for the given reaction is +2.71 V.

The overall reaction for the given electrochemical cell is:

Mg(s) + Cu2+(aq) → Mg2+(aq) + Cu(s)

The half-reactions involved are:

Mg2+(aq) + 2e- → Mg(s) (reduction)

Cu2+(aq) + 2e- → Cu(s) (oxidation)

The standard reduction potentials for these half-reactions are given in the table:

Mg2+(aq) + 2e- → Mg(s) E° = -2.37 V

Cu2+(aq) + 2e- → Cu(s) E° = +0.34 V

To calculate the cell potential (Ecell), we use the formula:

Ecell = Ecathode - Eanode

where Ecathode is the standard reduction potential of the cathode (the reduction half-reaction) and Eanode is the standard reduction potential of the anode (the oxidation half-reaction).

Since the reduction potential for Cu2+(aq) + 2e- → Cu(s) is greater than the reduction potential for Mg2+(aq) + 2e- → Mg(s), the Cu2+(aq)/Cu(s) half-cell is the cathode, and the Mg(s)/Mg2+(aq) half-cell is the anode.

Thus, we have:

Ecathode = +0.34 V

Eanode = -2.37 V

Substituting these values into the formula for Ecell, we get:

Ecell = Ecathode - Eanode

= +0.34 V - (-2.37 V)

= +2.71 V

To know more about cell potential,

https://brainly.com/question/1313684

#SPJ11

To calculate the time required for the concentration of reactant A to change from 0.260 mol/L to 0.026 mol/L in a second-order reaction with a rate constant (k) of 1.24 mL/(mol s), we can use the integrated rate law for a second-order reaction.

The integrated rate law for a second-order reaction is:

1/[A]t - 1/[A]0 = kt

Where [A]t is the concentration of reactant A at time t, [A]0 is the initial concentration of reactant A, k is the rate constant, and t is the time.

Rearranging the equation to solve for time (t), we get:

t = (1/[A]t - 1/[A]0) / k

Plugging in the given values:

t = (1/0.026 - 1/0.260) / 1.24

Calculating the expression within the parentheses:

t = (38.461 - 3.846) / 1.24

t = 34.615 / 1.24

t ≈ 27.89 seconds

Therefore, the time required for the concentration of reactant A to change from 0.260 mol/L to 0.026 mol/L is approximately 27.89 seconds.

Learn more about integrated rate laws and reaction kinetics

https://brainly.com/question/31656481?referrer=searchResults

#SPJ11

.

Calculating the solubility product constant (Ksp) from thermodynamic data involves using the standard free energy change of the dissolution reaction, ΔG°, which is related to Ksp by the equation: ΔG° = -RTlnKsp, where R is the gas constant and T is the temperature in Kelvin.

To calculate Ksp from thermodynamic data, you first need to determine the standard free energy change of the dissolution reaction. This can be done using thermodynamic tables or equations, such as the Gibbs-Helmholtz equation. Once you have ΔG°, you can use the above equation to calculate Ksp.

It's important to note that thermodynamic data alone may not always be sufficient to accurately determine Ksp. Experimental data, such as solubility measurements, may also need to be taken into account. Additionally, factors such as the effect of pH and the presence of other ions in solution can also affect Ksp and should be considered when calculating it.

To know more about solubility product constant, refer to the link below:

https://brainly.com/question/1419865#

#SPJ11

The structures of the aldol condensation products for:

For E-3-phenyl-2-propenal (cinnamaldehyde) and 4-methylcyclohexanone

β-hydroxyketone and has two possible stereoisomers: (2R,3S)-4-methyl-3-phenylpentan-2-ol and (2S,3R)-4-methyl-3-phenylpentan-2-ol.

For Benzaldehyde and cyclohexanone

The product is also a β-hydroxyketone and has two possible stereoisomers: (2R,3S)-1-phenyl-2-cyclohexen-1-ol and (2S,3R)-1-phenyl-2-cyclohexen-1-ol.

E-3-phenyl-2-propenal (cinnamaldehyde) and 4-methylcyclohexanone

In the presence of a base, such as NaOH or KOH, the α-hydrogen of 4-methylcyclohexanone can be deprotonated to form the enolate ion. This enolate ion can then attack the carbonyl carbon of the cinnamaldehyde molecule to form an aldol condensation product:

Benzaldehyde and cyclohexanone

In the presence of a base, the α-hydrogen of cyclohexanone can be deprotonated to form the enolate ion. This enolate ion can then attack the carbonyl carbon of benzaldehyde to form an aldol condensation product:

For more question on aldol condensation click on

https://brainly.com/question/27178362

#SPJ11

The structure of the aldol condensation product for E-3-phenyl-2-propenal and 4-methylcyclohexanone is (E)-3-(4-methylcyclohex-3-enyl)-2-propenal.

The aldol condensation reaction involves the nucleophilic addition of an enolate ion (generated from the carbonyl compound) to the carbonyl group of another carbonyl compound.

In the case of E-3-phenyl-2-propenal and 4-methylcyclohexanone, the enolate ion is generated from 4-methylcyclohexanone, and it attacks the carbonyl group of E-3-phenyl-2-propenal. The resulting aldol product undergoes dehydration to form (E)-3-(4-methylcyclohex-3-enyl)-2-propenal.

The structure of the aldol condensation product for benzaldehyde and cyclohexanone is 2-hydroxy-2-phenylcyclohexanone (also known as benzoin).

In this reaction, the enolate ion is generated from cyclohexanone, and it attacks the carbonyl group of benzaldehyde. The resulting aldol product undergoes dehydration to form the final product, which is 2-hydroxy-2-phenylcyclohexanone (benzoin).

Learn more about aldol condensation here :

https://brainly.com/question/31558115

#SPJ11

The solubility of potassium nitrate in water at 20°C is 32 g/100 g water. The given solution contains only 15 g of [tex]KNO_3[/tex] in 100 g of water, which is less than the maximum amount of [tex]KNO_3[/tex] that can dissolve at that temperature.

Therefore, the solution is unsaturated. To make it saturated, an additional 17 g of [tex]KNO_3[/tex] would need to be added to reach the maximum solubility of 32 g/100 g water. If more than 32 g of [tex]KNO_3[/tex] were added to the solution, the excess would not dissolve and would form a precipitate at the bottom of the container. It is important to note that the solubility of [tex]KNO_3[/tex] in water varies with temperature, and higher temperatures generally result in higher solubility.

To know more about potassium nitrate, here

brainly.com/question/30618191

#SPJ4

--The complete Question is, What is the solubility of potassium nitrate (KNO3) in water at 20°C, and will a solution containing 15 g of KNO3 in 100 g of water be saturated or unsaturated at that temperature? If the solution is unsaturated, how much more KNO3 would need to be added to make it saturated? The solubility of KNO3 in water at 20°C is 32 g/100 g water, which means that 32 g of KNO3 can dissolve in 100 g of water at that temperature. Since the solution in this question contains only 15 g of KNO3 in 100 g of water, it is unsaturated. To make it saturated, an additional 17 g of KNO3 would need to be added.--

The standard enthalpy change (ΔH°) for the reaction C2H6 + 2Cl2 → C2H4Cl2 + 2HCl is 151.5 kJ/mol.

To calculate the standard enthalpy change (ΔH°) for the given reaction, we need to use the bond energies of the molecules involved.

The balanced chemical equation for the reaction is:

C2H6 + 2Cl2 → C2H4Cl2 + 2HCl

The bond energies (in kJ/mol) are:

C-C: 347

C-H: 413

C-Cl: 339

Cl-Cl: 242

H-Cl: 431

The ΔH° for the reaction can be calculated using the formula:

ΔH° = (Σ bond energies of reactants) - (Σ bond energies of products)

ΔH° = [2(C-C) + 6(C-H) + 4(Cl-Cl)] - [1(C2H4Cl2) + 2(H-Cl)]

ΔH° = [2(347) + 6(413) + 4(242)] - [1(364) + 2(431)]

ΔH° = 151.5 kJ/mol

Therefore, the value of ΔH° for the given reaction is 151.5 kJ/mol.

Learn more about enthalpy

brainly.com/question/16720480

#SPJ11

ΔG°rxn for a redox reaction  can be calculated using the equation -RT ln(K), while E°cell can be calculated using (RT/nF) ln(K), where R is the gas constant, T is the temperature in Kelvin.

To calculate ΔG°rxn (standard Gibbs free energy change) and E°cell (standard cell potential) for a redox reaction with n = 2 and an equilibrium constant K = 30 at 25°C, we can use the following relationships:

ΔG°rxn = -RT ln(K)

E°cell = (RT/nF) ln(K)

Where:

By substituting the values into the equations, we can calculate ΔG°rxn and E°cell. Please note that without the specific balanced redox reaction, it is not possible to provide the numerical values.

Learn more about redox reaction

brainly.com/question/28300253

#SPJ11

The first two ionization energies of nickel:

Ni(g) → Ni+(g) + e^− (1st ionization energy)

Ni+(g) → Ni2+(g) + e^− (2nd ionization energy)

The fourth ionization energy of zirconium:

Zr3+(g) → Zr4+(g) + e^−

The first two ionization energies of nickel can be represented by the following equations:

Ni(g) → Ni+(g) + e- (first ionization energy)

Ni+(g) → Ni2+(g) + e- (second ionization energy)

The fourth ionization energy of zirconium can be represented by the following equation:

Zr3+(g) → Zr4+(g) + e-

In all equations, the state of the element or ion is indicated in parentheses, with (g) representing a gaseous state. The symbol e- represents an electron, and the arrow indicates the direction of the reaction.

Learn more about Ionization.

brainly.com/question/28385102

#SPJ11

Based on the information provided, we can perform an analysis of the toluene distillate and determine its purity. The retention time of toluene is 12.20 minutes, indicating that it is the main component in the sample.

To determine the purity of the toluene fraction, we need to analyze the area for the cyclohexane peak. The area for the cyclohexane peak is not provided, so we cannot calculate the percent composition of the contaminant.
However, we can make an assumption that the area for the cyclohexane peak is relatively small compared to the area for the toluene peak, since the retention time for toluene is much longer than that for cyclohexane. Therefore, we can conclude that the toluene fraction is relatively pure.
It is important to note that without knowing the area for the cyclohexane peak, we cannot accurately determine the purity of the toluene fraction. It is also important to perform further analysis to confirm the purity of the toluene fraction, such as additional GC analysis or other techniques such as NMR or mass spectrometry.

For more such question on toluene

https://brainly.com/question/30395350

#SPJ11

The retention time of toluene in this analysis was 12.20 minutes, and the area for the toluene peak was 3.12 cm². The retention time of cyclohexane was 5.74 minutes, and the area for the cyclohexane peak was 0.50 cm².

To calculate the percent composition of toluene and cyclohexane, we need to use the peak areas. The total area for both peaks is 3.62 cm² (3.12 cm² + 0.50 cm²).
The percent composition of toluene can be calculated by dividing the area for the toluene peak by the total area and multiplying by 100. So, the percent composition of toluene is (3.12 cm² / 3.62 cm²) x 100 = 86.19%.
Similarly, the percent composition of cyclohexane can be calculated by dividing the area for the cyclohexane peak by the total area and multiplying by 100. So, the percent composition of cyclohexane is (0.50 cm² / 3.62 cm²) x 100 = 13.81%.
To determine the purity of the toluene fraction, we need to compare the percent composition of toluene with the expected composition. Assuming the sample was pure toluene, the expected composition would be 100%. Therefore, the purity of the toluene fraction was 86.19%, indicating that there was some level of cyclohexane contaminant present in the sample.
In the given data, the retention time and area for the toluene and cyclohexane peaks are as follows:
1. Retention time of toluene (min): 12.20
2. Area for the toluene peak (cm²): 3.12
3. Retention time of cyclohexane (min): 5.74
4. Area for the cyclohexane peak (cm²): 0.50
To calculate the percent composition of toluene and cyclohexane, use the following formula:
Percent composition = (Area of the peak / Total area of all peaks) x 100
5. Percent composition of toluene (%): (3.12 / (3.12 + 0.50)) x 100 = 86.2%
6. Percent composition of cyclohexane contaminant (%): (0.50 / (3.12 + 0.50)) x 100 = 13.8%
7. Based on the GC data, the purity of the toluene fraction is 86.2%.

Learn more about cyclohexane here :

https://brainly.com/question/17019157

#SPJ11

The bond energy between two atoms is the amount of energy required to break the bond between them. Generally, the bond energy between two atoms depends on the strength of the bond, which in turn depends on the types of atoms involved and the arrangement of the electrons between them.

The bond energy between carbon and oxygen can vary depending on the particular molecule and the type of bond present. In general, the bond energy between carbon and oxygen increases as the bond becomes stronger. Based on this, we can arrange the following compounds in order of increasing bond energy between carbon and oxygen:

co32− < CO < CO2

The carbonate ion, CO32−, has the weakest bond between carbon and oxygen due to the presence of two negatively charged oxygen atoms that can repel each other, leading to a less stable bond between carbon and oxygen. This makes it the compound with the lowest bond energy between carbon and oxygen.

CO has a triple bond between carbon and oxygen, making it slightly more stable than CO32−. However, the bond between carbon and oxygen is still relatively weak, resulting in a higher bond energy compared to CO32−.

CO2 has two double bonds between carbon and oxygen, making it the most stable of the three compounds. It has the highest bond energy between carbon and oxygen due to the presence of multiple strong double bonds.

In summary, the order of increasing bond energy between carbon and oxygen is CO32− < CO < CO2.

To know more about strength refer here

https://brainly.com/question/9367718#

#SPJ11

The value of ΔG° at 25°C for the reaction between Ag(s) and Mn²⁺(aq) to give Mn(s) and Ag⁺(aq) is +1.98 kJ.

The standard Gibbs free energy change (ΔG°) of a reaction is related to the standard electrode potentials of the half-reactions involved using the equation:

ΔG° = -nFΔE°

Where n is the number of electrons transferred in the balanced equation for the overall reaction, F is the Faraday constant (96,485 C/mol), and ΔE° is the difference in the standard electrode potentials of the half-reactions involved.

The balanced equation for the reaction is:

Mn²⁺(aq) + 2Ag(s) → Mn(s) + 2Ag⁺(aq)

The standard electrode potential of the half-reaction for the reduction of Ag⁺(aq) is +0.80 V, and the standard electrode potential of the half-reaction for the reduction of Mn²⁺(aq) is -1.18 V. The overall reaction involves the transfer of two electrons, so n = 2.

Using the equation above, we can calculate the standard Gibbs free energy change:

ΔG° = -nFΔE°

= -2 × 96,485 C/mol × (0.80 V - (-1.18 V))

= +1.98 kJ

Therefore, the value of ΔG° at 25°C for the reaction between Ag(s) and Mn²⁺(aq) to give Mn(s) and Ag⁺(aq) is +1.98 kJ. Since ΔG° is positive, the reaction is not spontaneous under standard conditions at 25°C.

To know more about Gibbs free energy, refer here:

https://brainly.com/question/13318988#

#SPJ11

The approximate pH of the saturated solution of Mg₃(AsO₄)₂ in water is 2.20.

To calculate the pH of a saturated solution of Mg₃(AsO₄)₂, we need to consider the hydrolysis of the AsO₃⁻ ion derived from the weak acid H₂AsO₄.

The hydrolysis reaction of AsO₃⁻ can be represented as follows:

AsO₃⁻ + H₂O ⇌ HAsO₃ + OH⁻

Since the pKa values of the acid H₂AsO₄ are given, we can calculate the equilibrium concentrations of the species involved in the hydrolysis reaction.

Let's assume that x mol/L of AsO₃⁻ ion hydrolyzes to form HAsO₃ and OH⁻. At equilibrium, the concentration of HAsO₃ will also be x mol/L, and the concentration of OH⁻ will be x mol/L.

Using the pKa values, we can write the equations for the dissociation of H₂AsO₄:

H₂AsO₄ ⇌ H⁺ + HAsO₄⁻ (pKa₁ = 2.22)

HAsO₄⁻ ⇌ H⁺ + AsO₄³⁻ (pKa₂ = 6.98)

AsO₄³⁻ ⇌ H⁺ + HAsO₃²⁻ (pKa₃ = 11.50)

To calculate the concentrations of the species involved, we need to consider the initial concentration of AsO₃⁻ (given by the solubility product constant, Ksp) and the equilibrium concentrations of H₂AsO₄ and AsO₄³⁻.

The Ksp expression for Mg₃(AsO₄)₂ is:

Ksp = [Mg²⁺]³ * [AsO₄³⁻]²

Since Mg₃(AsO₄)₂ is considered saturated, the concentration of Mg²⁺ is equal to the solubility of Mg₃(AsO₄)₂, which can be calculated from the Ksp value:

2.1 x 10⁻²⁰ = (3s)³ * (2s)²

Solving the equation, we find that the solubility of Mg₃(AsO₄)₂ is approximately 1.41 x 10⁻⁷ M.

Now, let's set up an ICE (Initial, Change, Equilibrium) table to determine the concentrations of H₂AsO₄, HAsO₄⁻, and AsO₄³⁻:

Species | Initial Concentration | Change | Equilibrium Concentration

H₂AsO₄ | - | -x | x

HAsO₄⁻ | - | -x | x

AsO₄³⁻ | - | +x | x

Since the dissociation of H₂AsO₄ only involves one proton, the concentration of H⁺ is also equal to x.

The equation for the equilibrium constant expression for the hydrolysis of AsO₃⁻ is:

Kw = [H⁺][OH⁻] = x * x = x²

Since the pH is defined as -log[H⁺], we can express [H⁺] in terms of x:

[H⁺] = x

Taking the negative logarithm of both sides:

-pH = -log[H⁺] = -log(x)

Now, we need to find the value of x (which represents [H⁺]) to calculate the pH.

Since the equilibrium constant expression for the hydrolysis reaction of AsO₃⁻ is not provided, we cannot determine x directly. However, we can make an approximation assuming that the hydrolysis reaction is relatively small compared to the dissociation reactions of H₂AsO₄. In this case, we can neglect the contribution of x to the concentration of H⁺.

Therefore, we can consider that [H⁺] is approximately equal to the initial concentration of H₂AsO₄, which is the concentration of H₂AsO₄ before any hydrolysis occurs.

Using the pKa values, we can calculate the initial concentrations of H₂AsO₄ and HAsO₄⁻:

[H₂AsO₄] = 10^(-pKa₁) = 10^(-2.22) = 6.31 x 10^(-3) M

[HAsO₄⁻] = 10^(-pKa₂) = 10^(-6.98) = 1.25 x 10^(-7) M

Since H₂AsO₄ and HAsO₄⁻ are the initial concentrations, we can consider that [H⁺] is approximately 6.31 x 10^(-3) M.

Taking the negative logarithm of [H⁺], we can calculate the pH:

pH ≈ -log(6.31 x 10^(-3)) ≈ 2.20

Therefore, the approximate pH of the saturated solution of Mg₃(AsO₄)₂ in water is 2.20.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/28559466

#SPJ4

The specific heat capacity and mass of the substance will determine the amount of heat required to increase its temperature by a certain amount, but the sign of q will always be positive when the substance is being heated.

If a substance is heated from an initial temperature of 20 oC to a final temperature of 70 oC, the sign of q (the amount of heat) for the substance will be positive. This is because when a substance is heated, it absorbs energy in the form of heat, causing its temperature to increase. In this case, the substance is being heated, and its temperature is increasing from 20 oC to 70 oC. Therefore, the amount of heat absorbed by the substance will be positive.

to know more about specific heat capacity visit:

brainly.com/question/1747943

#SPJ11

a)  The bullet be moving 833.1 meters per second (m/s).

b)  The velocity of the bullet (833.1 m/s) will exceed the speed of sound. The bullet will travel at supersonic speed.

2A) A shotgun is similar to a pipe bomb in terms of energy conversion because both use chemical energy to create a high-pressure gas that propels a projectile.

2B) A shotgun is designed to be aimed and fired at a specific target, whereas a pipe bomb is typically used to create a more indiscriminate explosion.

a) To determine the velocity of the bullet, we need to calculate the amount of energy released by the nitroglycerin and then calculate the kinetic energy of the bullet. Nitroglycerin releases 10,390 calories of energy per gram when it undergoes complete combustion. Therefore, the combustion of 2.5g of NG will release 25,975 calories of energy.

To calculate the kinetic energy of the bullet, we need to convert the weight of the bullet from grains to grams. One grain is equivalent to 0.0648 grams, so the bullet weighs approximately 9.72 grams. Assuming that 60% of the released energy is transferred to the bullet as kinetic energy, we can calculate the velocity of the bullet using the following equation:

Kinetic Energy = 0.5 * m * v^2

where m is the mass of the bullet and v is its velocity.

25,975 calories = 0.6 * (0.5 * 9.72 * v^2)

Solving for v, we get v = 833.1 meters per second (m/s).

b) The velocity of sound in air at room temperature is approximately 343 m/s. Therefore, the velocity of the bullet (833.1 m/s) will exceed the speed of sound. The bullet will travel at supersonic speed.

2a) A shotgun is similar to a pipe bomb in terms of energy conversion because both use chemical energy to create a high-pressure gas that propels a projectile. In a shotgun, the chemical energy is stored in gunpowder or a similar propellant. When the gunpowder is ignited, it rapidly burns and produces a large volume of hot gas that builds up pressure behind the shotgun pellets or a single bullet. This high-pressure gas then forces the projectile out of the barrel and towards the target.

2b) A shotgun differs from a pipe bomb in terms of energy conversion in several ways. Firstly, a shotgun is designed to efficiently transfer the energy of the expanding gas to the projectile, whereas a pipe bomb is not. A shotgun achieves this by using a specially designed barrel and choke, which compresses the gas and creates a more focused, directional force on the projectile. Secondly, a shotgun is typically loaded with a large number of small pellets, which collectively transfer more energy to the target than a single bullet. Finally, a shotgun is designed to be aimed and fired at a specific target, whereas a pipe bomb is typically used to create a more indiscriminate explosion.

For more such questions on supersonic

https://brainly.com/question/18943317

#SPJ11

la) To calculate the velocity of the bullet, we first need to calculate the total energy released by the combustion of nitroglycerin. The balanced chemical equation for the combustion of nitroglycerin is:

4C3H5(ONO2)3(l) + 21O2(g) → 12CO2(g) + 10H2O(g) + 6N2(g) + O2(g)

The heat of combustion of nitroglycerin is -5676 kJ/mol. The molecular weight of nitroglycerin is 227.09 g/mol, which means that the heat of combustion of 2.5 g of nitroglycerin is:

(-5676 kJ/mol) / (227.09 g/mol) x 2.5 g = -157.5 kJ

However, only 60% of this energy is transferred to the bullet as kinetic energy. Therefore, the kinetic energy of the bullet is:

(60/100) x (-157.5 kJ) = -94.5 kJ

The mass of the bullet is 150 grains, which is equivalent to 9.72 grams. We can assume that all of the kinetic energy is transferred to the bullet. Therefore, the velocity of the bullet can be calculated using the formula:

KE = (1/2)mv^2

Where KE is the kinetic energy, m is the mass of the bullet, and v is the velocity of the bullet. Rearranging the formula, we get:

v = sqrt(2KE/m)

Substituting the values, we get:

v = sqrt(2 x (-94.5 kJ) / 9.72 g) = 217.6 m/s

lb) The speed of sound at room temperature is approximately 343 m/s. Therefore, the velocity of the bullet (217.6 m/s) is less than the speed of sound. Therefore, the velocity of the bullet will not exceed the speed of sound.

2a) A shotgun is like a pipe bomb in terms of energy conversion in that both devices release energy in the form of rapidly expanding gases. In a pipe bomb, an explosive material is enclosed in a pipe or container, and when it is detonated, the explosion produces high-pressure gases that rapidly expand and create a shock wave. In a shotgun, gunpowder is ignited behind a shell, which creates rapidly expanding gases that push the pellets out of the barrel.

2b) A shotgun is different from a pipe bomb in terms of energy conversion in that a shotgun is designed to convert the energy of the rapidly expanding gases into kinetic energy of the pellets or shot, while a pipe bomb is designed to release the energy of the rapidly expanding gases in all directions, causing destruction over a wide area. In a shotgun, the expanding gases are directed down the barrel and are used to propel the pellets forward. In contrast, in a pipe bomb, the expanding gases are not directed in any particular direction, and the explosion is intended to cause damage over a wide area.

Learn more about nitroglycerin here:

https://brainly.com/question/6347387

#SPJ11

Answer:The parent nuclide that initially underwent decay to form Lead-210 is Polonium-218.

Explanation: Polonium-218 undergoes a series of decays in which it emits two alpha-particles and two beta-particles, resulting in the formation of Lead-210. The decay series is as follows:

Polonium-218 → (alpha decay) → Lead-214 → (beta decay) → Bismuth-214 → (alpha decay) → Polonium-210 → (alpha decay) → Lead-206 → (beta decay) → Bismuth-206 → (beta decay) → Polonium-206 → (alpha decay) → Lead-202 → (beta decay) → Thallium-202 → (beta decay) → Lead-202 → (alpha decay) → Mercury-198 → (beta decay) → Gold-198 → (beta decay) → Mercury-198 → (alpha decay) → Lead-194 → (beta decay) → Bismuth-194 → (beta decay) → Polonium-194 → (alpha decay) → Lead-190 → (beta decay) → Bismuth-190 → (alpha decay) → Thallium-186 → (beta decay) → Lead-186 → (beta decay) → Bismuth-186 → (beta decay) → Polonium-186 → (alpha decay) → Lead-182 → (beta decay) → Bismuth-182 → (alpha decay) → Thallium-178 → (beta decay) → Lead-178 → (alpha decay) → Polonium-174 → (alpha decay) → Lead-170 → (beta decay) → Bismuth-170 → (beta decay) → Polonium-170 → (alpha decay) → Lead-166 → (beta decay) → Bismuth-166 → (beta decay) → Polonium-166 → (alpha decay) → Lead-162 → (beta decay) → Bismuth-162 → (alpha decay) → Thallium-158 → (beta decay) → Lead-158 → (beta decay) → Bismuth-158 → (beta decay) → Polonium-158 → (alpha decay) → Lead-154 → (beta decay) → Bismuth-154 → (alpha decay) → Thallium-150 → (beta decay) → Lead-150 → (alpha decay) → Polonium-146 → (alpha decay) → Lead-142 → (beta decay) → Bismuth-142 → (beta decay) → Polonium-142 → (alpha decay) → Lead-138 → (beta decay) → Bismuth-138 → (beta decay) → Polonium-138 → (alpha decay) → Lead-134 → (beta decay) → Bismuth-134 → (alpha decay) → Thallium-130 → (beta decay) → Lead-130 → (beta decay) → Bismuth-130 → (beta decay) → Polonium-130 → (alpha decay) → Lead-126 → (beta decay) → Bismuth-126 → (alpha decay) → Thallium-122 → (beta decay) → Lead-122 → (beta decay) → Bismuth-122 → (beta decay) → Polonium-122 → (alpha decay) → Lead-118 → (beta decay) → Bismuth-118 → (alpha decay) → Thallium-114 → (beta decay) → Lead-114 → (alpha decay) → Polonium-110 → (alpha decay) → Lead-106 → (beta decay) → Bismuth-106 → (beta decay) → Polonium-106 → (alpha decay) → Lead-102 →

lean more about decay

https://brainly.com/question/31880538?referrer=searchResults

#SPJ11

I apologize, but it seems like the equation you provided is incomplete. Please provide the complete balanced equation for the reaction involving nitrosyl chloride and chlorine, and I'll be happy to assist you with the questions about the system.

learn more about nitrosyl chloride

https://brainly.com/question/30461969?referrer=searchResults

#SPJ11

Relative supersaturation refers to the excess amount of solute present in a solution compared to its equilibrium concentration. It is an important parameter that affects the nucleation and growth of crystals from solution. In this case, we are interested in the effect of relative supersaturation on the primary, homogeneous nucleation of BaSO4 from an aqueous solution at 25°C, given the crystal density and interfacial tension.

Homogeneous nucleation occurs when nucleation sites are created spontaneously throughout the solution, without any external influence. It is a stochastic process that depends on the concentration of the solute, temperature, and interfacial tension. The critical relative supersaturation, S*, is the minimum value of supersaturation required for the onset of nucleation. Below S*, no nucleation occurs, while above S*, nucleation becomes spontaneous and rapid.

The expression for S* is given by the classical nucleation theory as:

S* = (2γv/ρkTln(S))^(1/2)

where γv is the interfacial tension, ρ is the crystal density, k is the Boltzmann constant, T is the temperature, and S is the relative supersaturation.

Substituting the given values, we get:

S* = (2 x 0.12 J/m2 x (4.50 g/cm3) / (1.38 x 10^-23 J/K x 298 K x ln(S)))^(1/2)

Simplifying this expression, we get:

S* = (4.32 x 10^12 / ln(S))^(1/2)

Now, let's assume a relative supersaturation value of 1.5. Substituting this value in the above equation, we get:

S* = (4.32 x 10^12 / ln(1.5))^(1/2)

S* = 3.94 x 10^6

This means that the critical relative supersaturation for homogeneous nucleation of BaSO4 from an aqueous solution at 25°C is 3.94 x 10^6. Any relative supersaturation value above this will lead to spontaneous and rapid nucleation of BaSO4 crystals. It is important to note that this value is only an estimate based on the classical nucleation theory and may not accurately reflect the actual nucleation behavior in a real system.

learn more about crystal density

https://brainly.in/question/1963990?referrer=searchResults

#SPJ11

Filtration time depends on various factors such as the volume of the sample, the porosity and size of the filter, and the rate of filtration.

In the absence of information regarding these factors, it is impossible to calculate the filtration time for 80 mL of water to pass through sample A (gravel).

Additionally, the properties of the water being filtered may also affect the filtration time, such as its viscosity or the presence of suspended solids.

Thus, it is important to provide all the necessary information when conducting filtration experiments and to carefully monitor the filtration process to ensure accurate and reliable results.

Read more about Filtration.

https://brainly.com/question/31609992

#SPJ11

The value for the reaction quotient is 0.0553, the value for the temperature is 362.15 K, the value for n = 2, and the standard cell potential for Mg(s) + Fe²⁺(aq) → Mg²⁺(aq) + Fe(s) is -3.14 V.

The reaction quotient, Q, for the cell is given by;

Q = [Mg²⁺][Fe(s)]/[Mg(s)][Fe²⁺]

Substituting the given values;

Q = (0.210)(1)/1(3.80) = 0.0553

The temperature, T, in Celsius is given as 89°C. To convert to kelvins, we add 273.15 to get;

T = (89 + 273.15) K = 362.15 K

The balanced equation for the reaction is;

Mg(s) + Fe²⁺(aq) → Mg²⁺(aq) + Fe(s)

The number of electrons transferred in the reaction is 2

So n = 2.

The standard cell potential, E°cell, can be calculated using the formula:

E°cell = E°cathode - E°anode

where E°cathode is the standard reduction potential for the cathode (Mg²⁺ + 2e⁻ → Mg) and E°anode is the standard oxidation potential for the anode (Fe²⁺ → Fe + 2e⁻).

The standard reduction potential for Mg²⁺ + 2e⁻ → Mg is -2.37 V, and the standard oxidation potential for Fe²⁺ → Fe + 2e⁻ is +0.77 V. Substituting these values, we get:

E°cell = (-2.37) - (+0.77) = -3.14 V

Therefore, the standard cell potential for Mg(s) + Fe²⁺(aq) → Mg²⁺(aq) + Fe(s) is -3.14 V.

To know more about standard cell potential here

https://brainly.com/question/14240930

#SPJ4

Part A: To find the reaction quotient, Q, use the formula:
Q = [Mg2+]/[Fe2+]
Given the concentrations: [Fe2+] = 3.80 M and [Mg2+] = 0.210 M, plug these values into the equation:
Q = (0.210)/(3.80) = 0.0553

Part B: To convert the temperature from Celsius to Kelvin, use the formula:
T(K) = T(°C) + 273.15
Given the temperature: 89°C, plug the value into the equation:
T = 89 + 273.15 = 362.15 K
Part C: The value of n represents the number of electrons transferred in the redox reaction. In this case, both Mg and Fe undergo a change of 2 in their oxidation states (Mg goes from 0 to +2, and Fe goes from +2 to 0). So, n = 2.
Part D: To calculate the standard cell potential (E°), use the standard reduction potentials for the half-reactions. The standard reduction potential for Mg2+/Mg is -2.37 V, and for Fe2+/Fe is -0.44 V. Since Mg is being oxidized, reverse the sign of its potential:
E° = E°(cathode) - E°(anode) = (-0.44) - (-2.37) = 1.93 V
So, your answers are:
Part A: Q = 0.0553
Part B: T = 362.15 K
Part C: n = 2
Part D: E° = 1.93 V

Learn more about redox reaction here:

https://brainly.com/question/28300253

#SPJ11

To determine which species will reduce Ag+ (silver ions) but not Fe2+ (iron ions), we need to consider their reduction potentials.

The reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction in a redox reaction.

Hydrogen gas (H2): Hydrogen gas has a relatively high reduction potential and is a strong reducing agent. It can typically reduce both Ag+ and Fe2+.

Chromium (Cr): Chromium can exhibit multiple oxidation states. In some forms, it can reduce Ag+ but not Fe2+. However, without specific information about the oxidation state of chromium in this context, we cannot determine its reducing properties accurately.

Potassium (K): Potassium has a low reduction potential and is not a strong reducing agent. It is unlikely to reduce Ag+ or Fe2+.

Carbon dioxide ion (CO2+): Carbon dioxide does not possess reducing properties and is unlikely to reduce either Ag+ or Fe2+.

In summary, based on general trends, hydrogen gas (H2) is likely to reduce both Ag+ and Fe2+. Chromium (Cr) in certain forms may reduce Ag+ but not Fe2+, but we need more information about the specific oxidation state. Potassium (K) and carbon dioxide ion (CO2+) are unlikely to reduce either Ag+ or Fe2+.

Learn more about redox reaction here : brainly.com/question/28300253

#SPJ11

The incorrect statement is option C, which states that fatty acid biosynthesis uses NADPH exclusively, whereas β oxidation uses NAD+ exclusively. This is incorrect because both processes use both NADPH and NAD+.

Fatty acid biosynthesis requires NADPH for the reduction of the growing fatty acid chain, while β oxidation requires NAD+ for the oxidation of the fatty acid chain. The other statements are correct. Option A is correct because crotonyl-CoA is an intermediate in fatty acid biosynthesis, while trans-2-buteneoyl-CoA is not. Option B is correct because D-β-hydroxybutyryl-CoA is an intermediate in the biosynthetic pathway of ketone bodies, but not in β oxidation. Option D is correct because fatty acid degradation occurs in the cytosol, while fatty acid synthesis occurs in the mitochondria. Finally, option E is correct because the buffer used can affect the rate of reaction for the condensation of two moles of acetyl-CoA, but it does not affect the cleavage of acetoacetyl-CoA.

To know more about fatty acid visit:

https://brainly.com/question/31752492

#SPJ11

The aqueous solution with the highest pH is option A, which is 0.100 M NaOH.

Among the given options, the aqueous solution with the highest pH is option A, which is 0.100 M NaOH.

NaOH is a strong base and dissociates completely in water to form Na+ and OH- ions. The OH- ions react with H+ ions in water to form water molecules, decreasing the concentration of H+ ions and increasing the pH of the solution. Since NaOH is a strong base, it can produce a high concentration of OH- ions in the solution, leading to a high pH value.

Option B, Na2O, is not a solution but a solid compound. Option C, NaNH2, is a strong base as well, but it is not as strong as NaOH, so it will not produce as high a concentration of OH- ions in the solution.

Option D is incorrect because the leveling effect only occurs when a strong acid or strong base is dissolved in water, limiting the pH value to the range of the solvent. However, in this case, NaOH is a strong base and will produce a much higher pH value than the other options.

Click the below link, to learn more about pH of solution:

https://brainly.com/question/15163821

#SPJ11

We need to add approximately 1.74 kg of nickel to 2.43 kg of copper to yield a solidus temperature of 1300°C. When copper and nickel are mixed together, they form an alloy.

The solidus temperature of the alloy depends on the proportions of copper and nickel in the mixture. To calculate the amount of nickel that must be added to 2.43 kg of copper to yield a solidus temperature of 1300°C, we need to use the lever rule equation. The lever rule equation relates the weight of each component in the alloy to the solidus temperature of the alloy. The equation is:

((Wn - Wc) / (Ws - Wc)) = ((Ts - Tc) / (Tn - Ts))

where:

Wn = weight of nickel to be added

Wc = weight of copper

Ws = weight of the resulting alloy

Ts = solidus temperature of the resulting alloy

Tc = solidus temperature of copper

Tn = solidus temperature of nickel

We are given the weight of copper (2.43 kg) and the solidus temperature of copper (1084°C). We are also given the desired solidus temperature of the alloy (1300°C) and the solidus temperature of nickel (1455°C).

We can use the lever rule equation to solve for the weight of nickel that must be added to the copper to yield the desired solidus temperature of 1300°C.

First, we rearrange the equation to solve for the weight of nickel:

Wn = ((Ts - Tc) / (Tn - Ts)) * (Ws - Wc)

Then, we substitute the known values:

Wn = ((1300°C - 1084°C) / (1455°C - 1300°C)) * (Wn + 2.43 kg - 2.43 kg)

We simplify this equation to get:

Wn = (216°C / 155°C) * Wn

Wn = 1.3935 * Wn

Finally, we divide both sides by 1.3935 to get:

Wn ≈ 1.74 kg

Therefore, we need to add approximately 1.74 kg of nickel to 2.43 kg of copper to yield a solidus temperature of 1300°C.

For more questions like temperature visit the link below:

https://brainly.com/question/31517883

#SPJ11

The mass of Na2HPO4 required to prepare a buffer solution with a target pH of 7.37, we need to consider the Henderson-Hasselbalch equation and the acid/base pair involved in the buffer system.

The Henderson-Hasselbalch equation is given by:

pH = pKa + log([base]/[acid])

Given:

Target pH = 7.37

pKa = 7.21

[base]/[acid] = 1.45

To achieve the target pH, we need to calculate the concentration of Na2HPO4 ([base]) and NaH2PO4 ([acid]) in the buffer solution.

Using the Henderson-Hasselbalch equation, we can rearrange it to solve for [base]/[acid]:

[base]/[acid] = 10^(pH - pKa)

Substituting the given values:

[base]/[acid] = 10^(7.37 - 7.21)

[base]/[acid] = 1.45

We are given [NaH2PO4] = 0.100 M, which represents [acid]. Therefore, we can calculate [base] as:

[base] = 1.45 × [acid]

[base] = 1.45 × 0.100 M

[base] = 0.145 M

Now, we need to calculate the mass of Na2HPO4 required to obtain a concentration of 0.145 M.

Molar mass of Na2HPO4 = 22.99 g/mol + 22.99 g/mol + 79.97 g/mol + 16.00 g/mol + 16.00 g/mol = 157.94 g/mol

Mass = moles × molar mass

Mass = 0.145 mol × 157.94 g/mol

Mass = 22.89 g

Therefore, approximately 22.89 grams of Na2HPO4 is required to prepare the buffer solution with a 1.00 L volume and a target pH of 7.37.

Learn more about Henderson-Hasselbalch equation here

https://brainly.com/question/31495136

#SPJ11

The excess reactant is the reactant that remains after the limiting reactant is completely consumed in a reaction. To convert from mass to mass, you need the molar masses of the reactants and products involved. The molar mass is the mass of one mole of a substance, expressed in grams/mol.

a) Moles to moles:

Given a balanced equation, you can determine the mole-to-mole ratio  by comparing the coefficients of the reactant and product in the balanced equation.

b) Converting  Mass to mass:

To convert from mass to mass, you need the molar masses of the reactants and products involved. The molar mass is the mass of one mole of a substance, expressed in grams/mol.

3. To determine the limiting reactant using mol to mol and mass to mass calculations,

Let' used this equation for reference purposes  A + B → C

a) Mol to mol:

b) Mass to mass:

Learn more on limiting reactant here https://brainly.com/question/30879855

#SPJ1