As Projectile range is independent of mass, so They all will have same range.
When an object is close to Earth's surface, its gravitational attraction is calculated using the formula F = mg, where m is the object's mass and g is a constant whose value varies depending on the location. On the surface of the earth, it averages 9.81 meters per second. And when one moves away from the surface in either an inner or an outward direction, this value drops.
Although the strength of the earth's gravitational pull changes depending on the mass of the object, the acceleration caused by it is constant (of course close to the surface). Consequently, when two items of different masses are dropped from the same height, they hit the ground simultaneously (neglect air resistance).
Any motion of a projectile simply consists of vertical and horizontal motion. Regardless of the direction the projectile is going in, gravity controls vertical motion since it only acts in that direction. Additionally, the acceleration caused by gravity is not reliant on the mass of the item. Therefore, the mass has no bearing on the vertical motion.
A projectile moves horizontally in a very straightforward manner. A projectile is not affected by horizontal forces. As a result, its horizontal velocity does not change. Additionally, the range is influenced by horizontal velocity and flying time. Flight time is influenced by vertical motion.
We now know that mass has no bearing on flying duration or range. And if you run into a projectile motion problem, simply divide the problem into horizontal and vertical motions. And handle it the same way you would a single-direction motion. greatly simplifies matters.
To learn more about Projectile from given link
https://brainly.com/question/10680035
#SPJ4
figure 2 shows a 7520kg lorry. the driver spots a hazard ahead and applies the brakes. the lorry decelerates uniformly and comes to a stop 50m after the brakes are applied. Estimate the braking force needed to stop the lorry in newtons
Answer:
25 m/s
Explanation:
v^2-u^2=2as
a= (v^2-u^2)
How does kinetic energy play a role in phase change?
During phase shift, the substance's molecules' average kinetic energy remains constant.
How does kinetic energy affect phase change?Simply put, molecules move more quickly as kinetic energy rises. Nevertheless, molecules change phases when potential energy rises. The molecule changes phases as a result of an increase in potential energy.
In a phase change, matter moves from one state to another either by gaining energy through heat and entering a more energetic state, or by losing energy through heat and entering a state with lower energy.
The energy supplied during phase change is only used to separate the molecules; none of it is used to boost the kinetic energy of the molecules. Therefore, since the molecules' kinetic energy is constant, its temperature won't increase.
To learn more about kinetic energy refer to:
https://brainly.com/question/26472013
#SPJ4
A skydiver, weighing 180 lb (including equipment) falls vertically downward from an altitude of 6000 ft and opens the parachute after 10 s of free fall. Assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0. 75|v| when the parachute is closed and is of magnitude 12|v| when the parachute is open, where the velocity v is measured in ft/s. (A computer algebra system is recommended. Use g = 32 ft/s^2 for the acceleration due to gravity. Round your answers to two decimal places. ) (a) Find the speed of the skydiver when the parachute opens. Ft/s (b) Find the distance fallen before the parachute opens. Ft (c) What is the limiting velocity v_L after the parachute opens? v_L = ft/s (d) Determine how long the sky diver is in the air after the parachute opens
The sky diver falls vertically downward from an altitude of 6000 ft and opens the parachute after 10 s of free fall.
What is Acceleration?
Acceleration is the rate of change of velocity over time. It is basically a vector quantity, meaning it has both magnitude and direction. Acceleration is caused by a force and is measured in meters per second squared (m/s2).
a) The speed of the skydiver when the parachute opens can be found by using the equation
v=gt,
where g is the acceleration due to gravity and t is the time of free fall.
We can substitute the given values into the equation to find the speed.
v=gt
v=(32ft/s^2)(10s)
v=320ft/s
b) The distance fallen before the parachute opens can be found by using the equation
s=1/2gt^2,
where g is the acceleration due to gravity and t is the time of free fall.
We can substitute the given values into the equation to find the distance.
s=1/2gt^2
s=(1/2)(32ft/s^2)(10s)^2
s=16000ft.
c) The limiting velocity after the parachute opens can be found by using the equation
v_L=√(2mg/ρA)
where m is the mass of the skydiver, g is the acceleration due to gravity, ρ is the density of air, and A is the projected area of the parachute.
We can substitute the given values into the equation to find the limiting velocity.
v_L=√(2(180lb)(32ft/s^2)/(1.225kg/m^3)(6m^2))
v_L=30.68ft/s.
d) The time the sky diver is in the air after the parachute opens can be found by using the equation
t=v/a
where v is the initial velocity, and a is the acceleration due to air resistance.
We can substitute the given values into the equation to find the time.
t=v/a
t=(320ft/s)/(12ft/s^2)
t=26.67s.
So, the sky diver is in the air for 26.67s after the parachute opens.
To know more about acceleration,
https://brainly.com/question/605631
#SPJ4
a force applied to a 3kg mass over a distance of 7.5m, increase the velocity of the mass from 5m/s. calculate the magnitude of the force assume the force and the displacement of the mass are parallel
The magnitude of the force assuming the force and the displacement of the mass is parallel is 10 N.
What is force?An agent with the ability to change a body's resting or moving condition is known as an external force. It has a magnitude and a direction. The place where force is applied is called the application, and the direction in which it is applied is called the direction of the force.
The Force can be computed using a spring balance. The SI unit of force is Newton (N).
What is the displacement with an example in physics?Displacement is the change in the location of an object independent of the direction it is traveling. Displacement is a vector quantity since it takes into consideration both the magnitude and the direction of an object's motion. As a vector quantity, displacement can have a positive, negative, or zero value.
Given:
m = 3kg
distance = 7.5m
Velocity = 5m/s
Now, we can calculate the time
Velocity = displacement/time
Time t = 7.5/5
Time t = 1.5s
F = ma
[tex]F = 3*\frac{v}{t}[/tex]
[tex]F = 3*\frac{5}{1.5}[/tex]
F = 3×3.33
F = 9.99
F = 10N
To know more about force visit:
https://brainly.com/question/12785175
#SPJ1
Two arrows are fired simultaneously with the same speed of 30.0 m/s. Each arrow has a mass of 0.100 kg. One is fired due east and the other due south. What is the magnitude of the total momentum of this two-arrow system
The magnitude of the total momentum of the two-arrow system can be calculated by adding the magnitudes of the individual momenta of each arrow is 4.242.
Calculation=
total momentum = sqrt ( m1u1^2 + m2 u2 ^2)
m1 u2 = 30 * 0.1 = 3
total momentum = sqrt ( 9 + 9 ) = 3 sqrt (2) = 4.242
What is the projectile's acceleration at the pinnacle of its trajectory?As a result, from the moment the projectile is hurled, through its greatest point, and until it touches the earth, its acceleration is 9.81 meters per second per second, or equal to the acceleration caused by gravity.
to know more about magnitude here:
brainly.com/question/14154454
#SPJ4
how much electrical energy is converted to light and thermal energy by a 160 w light bulb in one day
13824 x 10^3 J electrical energy is converted to light and thermal energy by a 160 w light bulb in one day
What is the best way to define thermal energy?Thermal energy is the movement of the molecules within an object or substance. Every material has heat energy; the sun is the primary thermal energy source in our solar system. The transfer of thermal energy through one material or item to another is known as heat.
Given,
Power = P = 160 W
time = t = 1 day = 24 hours = 24 x 3600 sec = 86400 sec
energy = power x time = 160 x 86400 = 13824 x 10^3 J
To know more about thermal energy visit:
brainly.com/question/11278589
#SPJ4
What is the lever arm between F and the pivot point?
A revolving bar that pivots on a fixed point serves as the lever arm between F and the pivot point.
The pivot is the elbow, while the forearm acts as the lever arm. The biceps muscle exerts the effort and bends the forearm in spite of the forearm's weight and whatever additional weight the hand may be carrying. The weight is farther away from the pivot than the effort.
The lever is a rotating bar that pivots on a fulcrum affixed to a fixed point. By applying forces at different angles in reference to the pivot or fulcrum, the lever generates motion. When the lever spins around the fulcrum, points farthest from it move faster than ones nearer to it.
The lever is a rotating bar that pivots on a fulcrum affixed to a fixed point. By applying forces at different angles in reference to the pivot or fulcrum, the lever arm generates motion. When the lever spins around the fulcrum, points farthest from it move faster than ones nearer to it.
For such more question on lever arm .
https://brainly.com/question/11661286
#SPJ4
given vectors ab, dc, and bc, simplify ab − dc + bc.
AB+CD+BC=AB+BC+CD=AD. It tells us that first traveling from A to B, then B to C, and from C to D is equivalent to directly traveling from A to D
Vector addition is defined as the geometrical sum of two or more vectors as they do not follow regular laws of algebra.
There are a few conditions for any vector addition, they are:
Scalars and vectors can never be added.For any two vectors to be added, they must be of the same nature.There are two laws of vector addition, they are:
Triangle law of vector additionParallelogram law of vector additionTriangle law of vector addition states that when two vectors are represented as two sides of the triangle with the order of magnitude and direction, then the third side of the triangle represents the magnitude and direction of the resultant vector.
To know more about Vector Addition:
https://brainly.com/question/2927458
#SPJ4
Arrange the objects from smallest to largest. swap_vert The diameter of Europa swap_vert The diameter of the rings around Saturn swap_vert The diameter of Charon
According to the given information the correct order is Charon ,Europa, Rings around Saturn.
What does diameter mean?A straight line that cuts through the middle of a figure and body is called a diagonal. Particularly: the width of a diameter; a line segment passing thru the center of the circle with its endpoints on the circumference.
What is larger, diameter or width?A circle's diameter is measured as the width of a line connecting its two center points. Since diameter only applies to circular or circularly based objects, such as a sphere or cylinders, the length and width must always be equal.
To know more about Diameter visit:
brainly.com/question/21248758
#SPJ4
Answer:
the order goes
G
E
C
A
Explanation:
Hope this helps.
created when sound is formed from vibrations that cause pressure changes in the surrounding air. it is called by ___
created when sound is formed from vibrations that cause pressure changes in the surrounding air. it is called a sound wave
Sound is a mechanical wave that results from the back-and-forth vibrations of the particles of the air medium through which the sound wave is moving.
These vibrations in the air are caused by the vibration of the objects that generate the sound. If a sound wave is moving from left to right through the air, then particles of air will be displaced both rightward and leftward as the energy of the sound wave passes through it.
The motion of the particles is parallel to the direction of the energy transport. This is what characterizes sound waves in air as longitudinal waves.
To know more about sound waves:
https://brainly.com/question/16093793
#SPJ4
Which of the following is an important starting assumption in models of galaxy formation?
A) Galaxies form first, then black holes.
B) All galaxies start out as spiral galaxies.
C) Black holes form first, seeding the formation of galaxies.
D) Some regions in the universe start out denser than others.
The assumption which is important in models of galaxy formation is Some regions in the universe start out denser than others. Option (D) is correct.
Models of galaxy formation begin with the premise that the universe was initially mostly uniformly filled with hydrogen and helium gas, with some regions of this gas being slightly denser than others.
The nucleus, a central bulge, a disc, spiral arms, and a large halo are the four main structural divisions of this structure. Some of the elements combine with one and other. A small portion of the galaxy, the galactic core is located about 400 light-years from the Milky Way's centre. Massive gas clouds which collapse and rotate are the initial point for galaxies. Stars develop within them as they develop. The collision of entire galaxies can change their appearance. When we look far into space, we can observe galaxies in their infancy.
To learn more about Galaxy :
https://brainly.com/question/14260147
#SPJ4
The distance your vehicle travels from the time the eyes see a hazard to the time the brain knows it's a hazard is called:
The distance your vehicle travels from the time the eyes see a hazard to the time the brain knows it's a hazard is called perception distance.
Distance perception refers to a process in which a viewer perceives an interval between two points in space. Perception distance is the distance a vehicle travels from the moment you see a hazard until your brain recognizes it. For an alert driver, this is about 3/4 of a second. The velocity of your car affects the distance needed to stop it. The stopping distance is persistent by three factors: perception distance, reaction distance, and braking distance. Perception time is how long it endures to recognize a condition and comprehend that you require to stop.
To learn more about perception distance visit here:
https://brainly.com/question/13034462
#SPJ4
Calculate where an additional 15kg pile of bricks would need to be placed to balance the beam (shown below). Show all calculations.
Placing the diagonal of the square along the line of the first distance mark on the beam, place one square load, one unit of length, along the beam from the pivot. One square load should be placed on the opposite side of the pivot to roughly balance this.
Why do we employ beam balance?For calibrating masses between 10 mg and 1 kg, a beam balance is utilised. Depending on the calibre and sharpness of the knife edge used to make the pivot, a given measurement can be made with a given resolution and accuracy.
What is a balance in the body?A physical balance is essentially just a tool for gauging weight. With the aid of another object whose weight is known, it is used to determine the weight of any unknown object.
To know more about beam visit:-
https://brainly.com/question/28288610
#SPJ4
A 120 Kg man is diving off a 40 meter cliff. What is his kinetic energy when he is 10 meters from the water?
The required kinetic energy of man diving out at 10 m from water is calculated to be 35.3 kJ.
Given that,
Mass of the man m = 120 kg
Height of the cliff H = 40 m
Distance from the water surface h' = 10 m
The mathematical equation of velocity efflux is
v = √( 2g ( H - h') = √( 2 × 9.8(40-10) = 24.25 m/s
The expression for kinetic energy of the man = 1/2 m v²
K.E = 1/2 m v² = 1/2 × 120 × 24.25² = 35283.75 J = 35.3 kJ
Thus, we can conclude that the kinetic energy of man diving out at 10 m from water is 35.3 kJ.
To know more about kinetic energy:
https://brainly.com/question/21505354
#SPJ4
(ii) a large electroscope is made with "leaves" that are 78-cm-long wires with tiny 21-g spheres at the ends. When charged, nearly all the charge resides on the spheres. If the wires each make a 26° angle with the vertical (fig. 16–55), what total charge q must have been applied to the electroscope?
The electroscope must have received a total charge of 2.45 x q if the wires are each at a 26° angle with the vertical.
The electroscope is what?An electroscope is a scientific tool which is used to find the existence of an electric charge on a body. The first electroscope with a pivoting needle, known as a versorium, was created by British physician William Gilbert in the year 1600.
What are the many varieties of electroscope?An electroscope is a piece of equipment used in science to determine whether and how much electric charge is present on a body. There are three traditional electroscope types: the needle electroscope, the gold-leaf electroscope, and the pith-ball electroscope (third). For each of them, we have simulators available.
Briefing:Equilibrium condition = mgsin∅ = 2.45 x [tex]10^{-6}[/tex]
To learn more about electroscope visit:
brainly.com/question/29073064
#SPJ4
Make meaurement and calculation to predict where the puck will land and whether the puck will land on Eintein or not. Upload or decribe all the tep you took to anwer thi. Include the meaurement you made from thi video, the equation you ued and the final reult
In the given case it can be concluded that- The two basic tenets of the special theory of relativity were that observers moving at constant speeds should be subject to the same physical rules and that the speed of light is constant for all observers.
According to Small amounts of mass (m) can be substituted for huge amounts of energy according to the theory, which uses the speed of light to establish the link between energy and matter (E), Einstein's general theory of relativity from 1915, the spacetime curvature is what causes what we experience as the gravitational force.Relativity ushered in the nuclear era while advancing our understanding of elementary particles and their basic interactions in the field of physics. Relativity made it possible for cosmology and astrophysics to predict unusual celestial phenomena like neutron stars, black holes, and gravitational waves.To know more about theory of relativity here
https://brainly.com/question/23896217
#SPJ4
An electron of mass m and charge -e is moving through a uniform magnetic field B=(B2,0,0) in vacuum. (Figure 1)At the origin, it has velocity v = (vx, Vy, 0), where vx >0 and Vy > 0. A screen is mounted perpendicular to the x axis at a distance D from the origin. Throughout, you can assume that the effect of gravity is negligible. First, suppose B, = 0. Find the y coordinate y of the point at which the electron strikes the screen. Express your answer in terms of D and the velocity components V, and Vy. View Available Hint(s) Figure 1 of 1 Now suppose B > 0, and another electron is projected in the same manner. Which of the following is the most accurate qualitative description of the electron's motion once it enters the region of nonzero magnetic field? O The electron decelerates before coming to a halt and turning around while always moving along a straight line. O The electron's motion will be unaffected. (It will continue moving in a straight line with the same constant velocity.) O The electron moves in a circle in the xy plane. screen O The electron moves along a helical path about an axis parallel to the field lines with constant radius and constant velocity in the x direction.
C:The electron moves in a circle in the xy plane.
What is electron ?
Electron is a free and open-source framework created by GitHub that helps developers build cross-platform desktop applications with HTML, CSS, and JavaScript. Electron is based on Node.js and Chromium, making it a powerful tool for creating native applications with web technologies. Electron enables developers to build desktop applications that can run on Windows, Mac, and Linux, as well as Android and iOS devices.
To learn about more electron
https://brainly.com/question/26084288
#SPJ4
A medical defibrillator stores 950 J of energy in a 100uF capacitor.
What is the voltage across the capacitor?
If the capacitor discharges 350J of its stored energy in 3.1ms , what power is delivered during this time?
Power is given at p=1.13 *10^(-5) throughout this period.
An electrical component that can store and release electric energy is a power capacitor. The device comprises of one or more pairs of plates that are connected to two terminals and allow the stored energy to be released into a circuit as needed. The plates are separated from one another by an insulating material (the dielectric). By removing the reactive power from the supply line, a capacitor aids in the improvement of power factor.
This is accomplished through the capacitor's storage of magnetic reversal energy. Power is defined as energy multiplied by the frequency of an operation. (a) Computation needs switching from one voltage (V 1) to another voltage (V 2) before most likely returning to a starting voltage (like V 1).
Power = u/t
p = 350/(3.1*(1/1000))
p= 1.13 *10^(-5)
Learn more about power visit: brainly.com/question/25864308
#SPJ4
It will be useful to be familiar with electric dipole moments when you start your study of electrocardiography. An electric diople moment is a vector that points:
An electric dipole moment is a vector that points means it has both magnitude as well as direction.
What does dipole moment electricity entail?A vector quantity is the electric dipole moment. It moves from a negative charge to a positive charge in a clearly defined direction. But it's crucial to keep in mind that only in physics is this convention of direction used.
What is the dipole moment in units?This vector quantity points in the direction of the dipole's positive charge from its negative charge. The SI unit for electric dipole moment is the coulomb-meter (Cm), whereas the C.G.S. unit is the debye.
To know more about electric dipole visit :-
brainly.com/question/28426313
#SPJ4
an object that falls twice as far will be moving twice as fast when it hits the ground. true or false
An object that falls twice as far will be moving twice as fast when it hits the ground is true.
Whath is object?
Objects are entities that have properties and state. They are the fundamental building blocks of a programming language. They are physical or abstract items that have a set of characteristics, such as a name, a type, and a value.Objects are items that can be seen and touched, such as a toy, a computer, a chair or a book. They are physical items that can be owned or interacted with. Objects can also exist in a virtual or abstract form, such as a software program or a mathematical concept. They can also be a combination of both, such as a website or a mobile app. Objects are made up of properties and behavior, which can be seen in the way they interact with other objects in the environment.
Objects can also contain other objects, known as properties. Objects can also have methods which are functions that can be performed on the object. Examples of objects in programming include variables, classes, functions, and arrays.
To learn more about object.
brainly.com/question/557206
#SPJ4
Why is torque greatest at 90 degrees?
Torque is defined as the cross product of the force and the distance from the center to the point of application (force = r * F * sin) (theta)
Where is the maximum torque?Keep in mind that at 90 degrees, the torque is at its highest level. Finding the lever arm and multiplying it by the applied force is a useful method for calculating the amount of torque. The distance that separates the force's line of action from its rotational axis is known as the lever arm.
Why does a 90-degree angle matter?Perpendicular describes two straight lines that meet at a 90-degree angle. When it comes to geometric proofs and examining various vertices and angles, perpendicular lines can be used in a variety of ways. They are helpful for making sure things are straight and aligned properly when painting or building.
to know more about torque here:
brainly.com/question/25708791
#SPJ4
Describe the properties of waves and explain how they can be measured.
Why is a sound wave considered a mechanical wave?
The properties of waves are: wavelength, time period.
Sound wave is considered a mechanical wave because it requires medium to travel.
What is mechanical wave?A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium.
A mechanical wave is something like a sound wave. A vacuum can not be traversed by sound waves.
Units of time and space can be used to measure the fundamental characteristics of waves. The length between wave crests, or wavelength (L), and the time it takes a wave to pass a fixed point, or period (T), are two characteristics that can be measured directly.
Learn more about mechanical wave here:
https://brainly.com/question/3101711
#SPJ1
On a cold winter night, a story comes on the news at stations across the northern part of Florida recommending that residents turn on their outside faucets to allow a slow drip of water. Why would that be recommended?
a-It keeps the ground from drying out.
b-It protects the water from shrinking in the pipes.
c-It stops the water from getting too salty.
d-It prevents the water from bursting the pipes.
On a cold winter night, a story comes on the news at stations across the northern part of Florida recommending that residents turn on their outside faucets to allow a slow drip of water. It would that be recommended because it prevents the water from bursting the pipes.
Option D is correct.
How do we prevent freezing pipes during freezing temperatures?During freezing temperatures, one of the things that you can do in order to prevent water from freezing and bursting the pipes is to run your faucet because running water does not freeze as easily as standing water, so letting it drip overnight will help.
The body faces the effects when subjected to freezing temperatures as it the body begins to lose heat faster than it can be produced. Prolonged exposure to cold will eventually use up your body's stored energy. The result is hypothermia, or abnormally low body temperature.
Learn more about freezing temperatures at: https://brainly.com/question/24314907
#SPJ1
Two pole-vaulters just clear the bar at the same height. The first lands at a speed of 8.85 m/s, while the second lands at a speed of 9.31 m/s. The first vaulter clears the bar at a speed of 1.17 m/s. Ignore air resistance and friction and determine the speed at which the second vaulter clears the bar.
Using the strain energy that the pole has stored in it, the running athlete's kinetic energy is transformed into the potential energy needed to jump.
What equation is used to calculate the maximum height of a pole vault?Males employ the formula: h= 0.60 * [male height] + 12(v2/g), whereas females use h= 0.55 * [female height] + 12(v2/g).
It is merely an instance of energy being exchanged. If an athlete can run at 10 m/s and we calculate g as 10 m/s/s, the height equals 5 m.
Each vaulter has three tries to clear a particular height during a competition. In order to fall readily if touched, a bar is supported by two uprights. Up until a winner is determined through the process of elimination, it is raised gradually.
There has been a failed trial. A competitor's pole breaking while trying to clear the bar is not considered a trial or failure. No one is permitted to touch the vaulting pole.
To learn more about pole refer to:
https://brainly.com/question/3506806
#SPJ4
A candy-filled piñata is hung from a tree for Matthew's birthday. During an unsuccessful attempt to break the 4. 4-kg piñata, Hayden cracks it with a 0. 54-kg stick moving at 4. 8 m/s. The stick stops and the piñata undergoes a gentle swinging motion. Determine the swing speed of the piñata immediately after being cracked by the stick
The velocity of the other piece of the pinata which has a mass of 3.86 kg
is 0.67 m/s
The mass of the candy-filled pinata = 4.4 kg
The mass of the first piece of the pinata = 0.54 kg
The velocity of the first piece of the pinata = 4.8 m/s
The mass of the second piece = 3.86 kg
The velocity of the other piece can be found using the formula,
mu = m₁v₁ + m₂v₂
where m is the mass of the pinata
u is the velocity of the pinata at rest
m₁,m₂ are the masses of the first and second pieces of pinata
v₁,v₂ is the velocity of the two pieces
Let us substitute the known values in the above equation, we get
4.4 x 0 = 0.54 x 4.8 + 3.86v₂
= 2.592 + 3.86v₂
3.86v₂ = -2.592
v₂ = 2.592/3.86
= 0.67 m/s
Therefore, the velocity of the other piece is 0.67 m/s
Learn more about the collision in
https://brainly.com/question/4322828
#SPJ4
A person weighing 500 N and a girl weighing 350 N are sitting on a board. The 50N- board is uniform and is supported at the center. The 500-N person is 1.5 m from the center, how far from the center should the girl sit so that the board is in equilibrium
The girl should sit 2.14 m from the center to keep the board in equilibrium.
What is equilibrium?
Equilibrium is a state in which the net force and net torque acting on an object are both equal to zero. This means that the object is either at rest or moving at a constant velocity. In other words, the object is not accelerating or rotating.
In order for the board to be in equilibrium, the sum of the forces acting on it must be equal to zero. Since the board is uniform and supported at the center, the only forces acting on it are the weights of the person and the girl.
To find the distance from the center that the girl should sit, we can set up the following equation:
F_net = 0 = (500 N)(1.5 m) - (350 N)(x)
where F_net is the net force acting on the board, x is the distance from the center where the girl is sitting, and the 1.5 m is the distance from the center where the person is sitting.
Solving this equation for x:
x = (500 N)(1.5 m) / 350 N = 2.14 m
Hence, the girl should sit 2.14 m from the center to keep the board in equilibrium.
To learn more about equilibrium from the given link:
https://brainly.com/question/1041717
#SPJ4
Why is static flexibility important?
Static stretching promotes range of motion (ROM), reduces musculotendinous stiffness, and lowers the risk of acute muscle strain injuries by relaxing and lengthening the muscles.
Benefits and objectives:Static is primarily used for variables or methods that are constant across all instances of a class. Static stretching has the potential to reduce discomfort and stiffness after a workout while also enhancing flexibility and range of motion. To help you feel more relaxed, static stretching is a fantastic approach to help your muscles release stress and tension. It is quite efficient to improve flexibility in this way. You should incorporate static stretches into your cool-down routine to help prevention of injury.
To learn more about flexibility visit:
brainly.com/question/2645707
#SPJ4
Answer is needed as soon as possible!
The reaction below is conducted in a closed system.
Is the following reaction an endothermic or exothermic reaction?
Why is it that type of reaction?
N2+O2 -> 2NO+181kJ
This is an exothermic reaction because it releases energy in the form of heat (181kJ). When an exothermic reaction occurs, energy is released into the environment.
What is exothermic reaction?
An exothermic reaction is a chemical reaction that releases energy in the form of heat. This heat is released into the environment, making the surrounding area warmer.
Exothermic reactions can occur naturally and can also be artificially induced. Examples of exothermic reactions include burning fuels, neutralization reactions, and even certain biological processes.
To learn abot more exothermic reaction.
https://brainly.com/question/6357350
#SPJ1
What is the difference between static and dynamic flexibility ?
Static stretches are those in which you remain in a single position—standing, sitting, or lying still—for up to 45 seconds. Dynamic stretches are regulated motions that get your ligaments, muscles.
Stretches that are static versus those that are dynamic:Movement is included into dynamic stretches, such as lunges with a torso twist. As opposed to dynamic stretches, static stretches include holding a stretched position for a while. Stretches that are static include the triceps stretch and the butterfly stretch.
A swimmer might, for instance, circle their arms before entering the water. A series of movements to get the body moving before engaging in any kind of exercise can also be considered dynamic stretches.
To learn more about flexibility visit:
brainly.com/question/2645707
#SPJ4
The electron microscope has been widely used to obtain highly magnified images of biological and other types of materials. When an electron is accelerated through a particular potential field, it attains a speed of 9.47 * 106 m>s. What is the characteristic wavelength of this electron
wavelength run at 9.47 * 106 m/s. E=hf = 12mv2 = h/mv = 6.63x10-34"/ [(9.1094x10-31)(9.82x106)] when an electron moves through a specific potential field more quickly.
What are the purposes of electron microscopes?9.47 * 106 m/s speed. What is this electron microscopy's (EM) signature wavelength? EM is a method for acquiring high-resolution pictures of both biological and non-biological materials. It is employed in biomedical to look at the precise structure of organelles, macromolecular complexes, tissues, cells, and cells.
Do electron microscopes have greater power?This increases the power of electron microscopes over light microscopes. A light microscope can factor model up to 2000 times, but depending on the model you choose, an electron microscope may magnify anything from 1 and 50 million times! Look at the outcomes to see.
to know more about wavelength visit :
https://brainly.com/question/13533093
#SPJ4