How does heat transfer?
​

The formula for the horizontal component (Fx), which is the angle the force makes with the horizontal, is Ftens•cosine(). Ftens• sine() can be used to compute the upward component (Fy), where is the angle that the force produces with the horizontal.

The portion of a force that works horizontally with regard to a body is known as its horizontal component. Its vertical component is known as its vertical component.

The pulling of the box is with the rope horizontal. When the rope is angled Because Is less than, the horizontal component (= F cos ) is less. As a result, it is the proper response.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

At separation  of 1470 meters, the two charges exert a force of 0.70 N on each other.

Electric force is the interaction between any two charged objects that can be either attractive or repelling. Newton's rules of motion, which apply to all forces, explain how each one affects the target body and how it does so. The electric force is one of the many forces that operate on objects.

We know that electric force can be mathematically defined as:

F = kQq/r²

0.70 = 9.0 × 10⁹ × (6.0×10⁻⁹)²/r²

r = 1.47 meter.

Hence, the separation between two charges is 1.47 meters.

Learn more about electric force here:

https://brainly.com/question/20935307

#SPJ1

Answer:

628 J

Explanation:

ME = PE + KE

PE = mgh = 0,  because h = 0

KEi (initial KE) = 1/2mv² = 1/2(62.3 kg)(4.49 m/s)² = 628 J

KEf (final KE) = 0, because v-final = 0

All the initial ME, which is all KE, converts to thermal E due to friction

Answer:

v3 = 0 gm/s / 700g

Explanation:

To solve this problem, you need to use the principle of conservation of momentum, which states that the total momentum of a system remains constant unless acted upon by an external force. In this case, the total momentum of the system (the 2kg object before it explodes) is equal to the sum of the momenta of the three pieces after the explosion.

You can calculate the momentum of each piece by multiplying its mass by its velocity:

P1 = 800g * 30 m/s = 24,000 gm/s

P2 = 500g * 520 m/s = 260,000 gm/s

The total momentum of the system is the sum of these two momenta:

Ptotal = P1 + P2 = 24,000 gm/s + 260,000 gm/s = 284,000 g*m/s

The third piece has a mass of 2kg - 800g - 500g = 700g. We can use the conservation of momentum equation to find its velocity:

Ptotal = (700g * v3) + (800g * 30 m/s) + (500g * 520 m/s)

v3 = (Ptotal - (800g * 30 m/s) - (500g * 520 m/s)) / 700g

v3 = (284,000 gm/s - (800g * 30 m/s) - (500g * 520 m/s)) / 700g

v3 = (284,000 gm/s - 24,000 gm/s - 260,000 gm/s) / 700g

v3 = (284,000 - 24,000 - 260,000) gm/s / 700g

v3 = 0 gm/s / 700g

The velocity of the third mass is 0 m/s.

Hope this helps.

The following which is not a safety tip for outdoor activities is to go alone for a sense of oneness with nature and is therefore denoted as option A.

This is referred to as the condition of being protected from harm or other danger and it involves the use of various methods and activities and an example is to ensure that a  basic first aid kit is available so as to help in the incident of an injury.

However going alone for a sense of oneness with nature is not a safety tip as should in case any issue arises there will be no one to support and rescue such individual.

Read more about Safety here https://brainly.com/question/8430576

#SPJ1

The full question is:

Which of the following is not a safety tip for outdoor activities

a. go alone for a sense of oneness with nature

b. bring a basic first aid kit

c. bring a flashlight or headlamp

d. pack plenty of water and energy-dense food

The mass of the girl is 30 kg  in order for the seesaw to be in equilibrium.

A particular kind of lever is a seesaw, which has a long beam coupled to a pivot known as the fulcrum.

As soon as you sit on one side of the beam and apply weight on one end, the beam falls to the ground. This is because the weight of your body is being pulled down by the force of gravity, along with the beam.

Let the  mass of the girl = m kg

In equilibrium;

40 kg × 300 cm = m × 400 cm

⇒ m = 30 kg.

Hence,  the mass of the girl is 30 kg.

Learn more about seesaw here:

https://brainly.com/question/28566147

#SPJ1

A stronger force can cause a greater change in an object's velocity. The correct option is yes

The force exerted by the thrusters caused the pod to change direction. The thrusters on the ACM pod exerted the same strength force as thrusters on other pods on other missions. If the same strength force is exerted on two objects but the objects have different masses the object with less mass will have a greater change in velocity.

Therefore pod would have had to have a lighter mass meaning a smaller amount of force would have had to be exerted onto the pod making it move in the opposite direction.

Learn more about pod change here: brainly.com/question/19148969

#SPJ1

The magnitude of the constant acceleration of the ball is 9.7 m/s².

Acceleration is the rate of change of velocity.

To calculate the constant acceleration of the ball, we use the formula below.

Formula:

From the question,

Given:

From the question,

Given:

Substitute these values into equation 1

Hence, the acceleration is 9.7 m/s².

Learn more about acceleration here:  https://brainly.com/question/26216029

#SPJ1

1 N*m = 1 Joule

40 N*m = 40 joules

Answer:

Fault

Explanation:

it only carries a current if there is a fault.

The displacement of the iguana between 3 s and 6 s  is 6.71 meters.

The distance traveled by the iguana between 3 s and 6 s is  8.08 meters.

Distance is the sum of an object's movements, regardless of direction.

The term "displacement" refers to a shift in an object's position.

According to the graph:

The displacement of the iguana between 3 s and 6 s

= √{ (3-6)²+(6-0)²} meters

= 6.71 meters.

The distance traveled by the iguana between 3 s and 6 s

= [ √{ (3-5)²+(6-6)²} +√{ (5-6)²+(6-0)²}] meters

= [2+ 6.08] meters

= 8.08 meters.

Learn more about displacement here:

https://brainly.com/question/11934397

#SPJ1

Impact Speed means the maximum speed of impact tested upon the bumper of the vehicle pursuant to sections 581.6 and 581.7 of part 581 of title 49 of the Code of Federal Regulations.

To learn more about impact speed to refer:

https://brainly.com/question/15695646

#SPJ1

According to the given statement The time required is 2 seconds.

An unseen factor is an agent that has the power to alter the resting or moving condition of a body. It has a direction or a magnitude. The stress applied is the location at which force is applied, and the direction where the force applied is known also as direction of the force.

The vector composition of mass (m), acceleration, and the amount of force is used to express force (a). Mathematically, the equation or equation for force may be written as follows:

                             Force = mass x acceleration.

We know the force and the mass, so we can write:

6,000 N

= (1,200 kg) x (acceleration).    

      i.e. Acceleration = 6000N/1200kg = 5 m/s² .

That's the acceleration.  The speed changes by 5 m/s each second

that the force acts on it.  If the force pushes from behind, then it goes

5 m/s per second faster. It moves 5 m/s slower each second if the force is pushing from the front.

We wish to slow it down from its current speed of 10 m/s to 0 m/s. Therefore, the force must push from the front, and the task will be finished in (10/5) = 2 seconds.

So, time required is 2 seconds.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ1

The statement indicates that angle 3 seems to have a 117 degree measurement.

Compare of an untold amount with a fixed quantity that is known or A attribute of an item or event is measured when a number is assigned to it so that it may be compared to other things or occurrences.

An angle is the figure produced by two photons that must intersect at a shared terminal in geometry. The symbol should indicate an angle.

The sum of the two degrees is 180 degrees but since radius 5 is 63 degrees.

Angle 3 is therefore = 180 - 63 = 117 degrees.

Consequently, angle 3 has a measure of 117 degrees.

To know more about Measure visit:

https://brainly.com/question/28827992

#SPJ1

The

friction

force acting on the bag is 4.36µ.

What is friction force?

The

force

preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.

Given,

Force =F=22.5 n

Mass=m= 10 kg

mu=µ=?                            

(1N= 1kg m/s²)

Gravitational force =g= 9.81 m/s²

As we know,

F= µ*m*g

µ= m*g/F

  = 10*9.81/ 22.5

µ= 4.36 .

Therefore, the friction force acting on the bag is 4.36.

To know more about

Force

visit:

brainly.com/question/26115859

#SPZ1

The bag is subject to a friction force of 4.36. A man applies a 22.5 N force at a 32° angle while dragging a 10.0 kilogram bag of mulch at a steady speed.

Friction refers to the force that resists hard surface, fluid layering, and materials ingredients from gliding past one another. Friction lessens a machine's mechanical advantage, or, to put it another way, friction decreases the output to input ratio.

Force = 22.5 N

Mass  = 10 kg

⇒ mu     = µ (1N= 1kg m/s²)

⇒ g        = 9.81 m/s²

As we know, F= µ × m × g

⇒ µ = (m × g)/F

⇒ (10 × 9.81)/ 22.5

⇒ µ = 4.36 .

Therefore, the friction force acting on the bag is 4.36.

To know more about Force visit :-

https://brainly.com/question/13191643

#SPJ1

Based on the data given:

The change in momentum of the object equals the impulse experienced by the object

Mathematically,

Impulse = change in momentum

Impulse = F • t

change in momentum = m • Δ v

F • t = m • Δ v

where

F is the force

t is the time the force acts

m is the mass of the object

Δv is the change in velocity

For the given values:

change in momentum of the object = 7.36 * 24.7

change in momentum = 181.8 N.s

Change in velocity, Δv = change in momentum / mass

Change in velocity, Δv =  181.8 / 2.1

Change in velocity, Δv = 86.6 m/s

Learn more about change in momentum at: https://brainly.com/question/20363811

#SPJ1

The force is 196 N (20kg x 9.8 m/s2)

Force is an action or influence that causes an object to change its state of motion or rest. Force can be exerted by a single object or by two or more objects interacting with each other. Examples of force include friction, gravity, magnetism, electricity, and pressure. The magnitude of a force is usually measured in newtons (N) and is determined by the amount of mass and acceleration of the object it is acting upon.

The force exerted on the coyote by the ground is equal to the mass of the coyote multiplied by the acceleration due to gravity, which is 9.8 m/s2.

To learn more about force
https://brainly.com/question/12970081
#SPJ1

heating or pressing but heating is most appropriate, so the answer is heating.

Dispersion in wave theory is the phenomena where a wave's phase velocity changes depending on its frequency. The article can explore different definitions. This is the typical definition for dispersion (waves).

When sinusoidal waves with various wavelengths propagate at various speeds, a wave packet with mixed wavelengths has a tendency to disperse in space. Dispersion in wave theory is the phenomena where a wave's phase velocity changes depending on its frequency.

The article can explore different definitions. This is the typical definition for dispersion (waves).

A full set of approximate solutions to the one-electron Schrödinger equation are found in a three-dimensional atomic lattice that is randomly filled with atoms of different kinds and has, on average, the periodicity of a Bloch wave.

Equations are provided that enable the calculation of each wave's energy, average behavior, absent a phase factor, close to any sort of atom, and damping parameter.

A comparison is made between a periodic lattice with a complicated, energy-dependent potential and a random A-B lattice. The dispersion relation of the system is obtained by solving the eigenvalue problem in this potential using any of the established techniques for periodic potentials.

To learn more about Dispersion theory from given link

https://brainly.com/question/28461293

#SPJ1

Answer:

CM of a system ( 0.5l , 0.25l )

Explanation:

x = (m1.x1 +m2.x2 +m3.x3) / ( m1 + m2 +m3)

x = ( m x 0 + m x 0 + 2m x l ) / ( m+m+2m)

x = 2m x l / 4m

x = 0.5 l

y = (m1 x y1 +m2 x y2 +m3 x y3) / ( m1 + m2 +m3)

y = (m x 0) + m x l + 2m x 0 ) / ( m + m + 2m )

y = m x l / 4m

y = 0.25 l

Precipitation amount, storm frequency, and severity, storm duration, kind of precipitation, wind during storm, and wind during evaporation are the main precipitation and storm elements that influence interruption loss (Kenneth, 1996).

All procedures that stop rainfall from instantly reaching the soil are referred to as interceptions. The two main ways that vegetation intercepts water are by catching it on leaf surfaces throughout the canopy and by depositing litter on the ground.

Precipitation that is intercepted by leaves, plant branches, and the forest floor prevents it from reaching the soil and instead stays on the surface.

To know more about Precipitation visit:-

https://brainly.com/question/29762381

#SPJ1

The mechanical advantage of the lever is 3.5.

The ideal mechanical advantage of the lever is 4

The efficiency of the lever is 87.5 %.

The mechanical advantage of the lever is the ratio of the load overcame by the lever to the effort applied by the lever.

M.A = Load / Effort

From the graph we will find the change in load to change in effort is calculated as;

M.A = ( 160 N - 20 N ) / ( 50 N - 10 N )

M.A = 3.5

The ideal mechanical advantage of the lever is calculated as follows;

I.M.A = distance travelled by effort / distance travelled by load

I.M.A = ( 2 m ) / ( 0. 5 m )

I.M.A = 4

The efficiency of the lever is calculated as follows;

E = M.A / I.M.A x 100%

E = ( 3.5 / 4 ) x 100%

E = 87.5 %

Learn more about efficiency of lever here: https://brainly.com/question/29263794

#SPJ1

C) The mantle's particles will become more dense and rise as a result of the core heat, causing the lithosphere's plates to move in the opposite direction of the convection current.

Convection Currents The lithosphere becomes denser than the surrounding magma and sinks back toward the core as the heated mantle transfers heat energy to it.

Conduction from the core directly heats the lower mantle. As atoms collide, heat is transferred in conduction. Convection is the movement of warm and cool materials upward and downward. Material that is hot rises to the surface through conduction.

“hot spots," which are non-plate tectonic volcanic regions, are probably caused by mantle plumes. A diapir is formed when a mantle plume reaches the upper mantle. Volcanic eruptions are sparked by the heat generated by this molten material in the asthenosphere and lithosphere.

To learn more about mantle here:

https://brainly.com/question/28827790

#SPJ1

Important Formulas:

[tex]F=ma[/tex]

force(measured in newtons) = mass(measured in kg) * acceleration(measured in m/s^2)

[tex]w=Fd[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

__________________________________________________________

Given:

[tex]m=25kg[/tex]

[tex]d=15m[/tex]

[tex]w=?[/tex]

We know that the acceleration due to gravity is 9.8 m/s^2.

__________________________________________________________

Finding force:

[tex]F=ma[/tex]

[tex]F=25\times9.8[/tex]

[tex]F=245N[/tex]

__________________________________________________________

Finding work:

[tex]w=Fd[/tex]

[tex]w=245\times15[/tex]

__________________________________________________________

[tex]\fbox{w = 3675 Joules}[/tex]

Answer:

c

Explanation:

90 F. The temperature of the mixture can be calculated using the Ideal Gas Law.

This states that the product of the pressure, volume, and absolute temperature of a gas is equal to the product of the number of moles of the gas and the universal gas constant.

Using this equation, we can solve for the temperature of the mixture, given the total pressure and the total volume of the mixture.

We can first calculate the total number of moles of the mixture, by assuming both gases are ideal:

18 cu ft of gas at 60 psia and 190 F = 1.64 moles

28 cu ft of gas at 40 psia and 60 F = 1.28 moles

Total moles of the mixture = 2.92 moles

Using the Ideal Gas Law, we can then calculate the temperature of the mixture:

(100 psia x 22 cu ft x T) = (2.92 moles x 0.082)

T = 90 F.

What is the Ideal Gas Law?

The Ideal Gas Law is an equation that describes the relationship between pressure, volume, temperature, and amount (in moles) of an ideal gas. It states that: PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the ideal gas constant, and T is the temperature.

Hence, Option D is correct.

To know more about the Ideal Gas Law,

https://brainly.com/question/15132707

#SPJ1

Doing contracting work for government agencies of private businesses

The mission control center is a facility that is responsible for controlling and coordinating the operations of a spacecraft during a mission. It is typically run by NASA or another space agency and is used to monitor and communicate with spacecraft, as well as to plan and execute mission objectives. The mission control center is not typically involved in contracting work for government agencies or private businesses.

Hope This Helps You!

In the figure below, the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm is 63 m/s.

Periodic or oscillatory motion is defined as a motion that repeats itself. Due to a restoring force or torque, an object in such motion oscillates around an equilibrium position.

Energy is conserved in oscillation.

So, the maximum loss in Potential Energy = Maximum gain in Kinetic energy

5 J - 1 J = Maximum gain in Kinetic energy

Maximum gain in Kinetic energy = 4 J

[tex]0.5 \times m \times vmax^2 = 4\\0.5 \times 2.0 \times 10^-3\; Kg \times vmax^2 = 4 J\\vmax^2 = 4 \times 10^3 m^2/s^2\\vmax = 63.2 m/s[/tex]

Therefore, the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm is 63 m/s.

To learn more about oscillation, refer to the link:

https://brainly.com/question/27542934

#SPJ1

To find the horizontal and vertical components of the tension force in para sailing, we can use the basic trigonometric ratios of sine, cosine and tangent.

To know more about trigonometric ratios , check out :

https://brainly.com/question/4399339

#SPJ1

Answer:

Old = senior. geriatric. senescent. unyoung. over-the-hill.

Stubble= bristles