How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K?
Answers
0.026 moles is the right answer.
We have that for the Question "How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K?" it can be said that moles of xenon gas is
n=0.22moles
From the question we are told
How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K?
Generally the equation for the ideal gas is mathematically given as
[tex]n=\frac{Pv}{RT}\\\\n=\frac{0.64*8.5}{0.08206*300}[/tex]
n=0.22moles
Therefore
How many moles of xenon gas are necessary to exert a 0.64atm pressure in an 8.5L container at 300.0K is
n=0.22moles
For more information on this visit
https://brainly.com/question/1641336
Related Questions
a) How much has pH of pure water in equilibrium with the atmosphere changed between pre-industrial times and 2019? (www.co2.earth/ for information and CO2 concentration now grows at 2.1 ppm/year)
b) Predict your life expectancy and when you would take your last puff of atmospheric CO2 based on typical life expectancy in the United States. Calculate the expected PCO2 by that time. What would the pH of pure water in equilibrium in the atmosphere by then?
Answers
Using the Henderson-Hasselbalch equation, we can estimate that the expected pH of pure water in equilibrium with the atmosphere in 2099 would be around 7.9.
a) The pH of pure water in equilibrium with the atmosphere has decreased from approximately 8.2 in pre-industrial times to around 8.1 in 2019. This change in pH is due to the increase in atmospheric carbon dioxide (CO2) levels, which has led to the ocean absorbing more CO2 and becoming more acidic.
According to the website www.co2.earth, the current annual growth rate of atmospheric CO2 is 2.1 ppm (parts per million). Therefore, we can estimate that the atmospheric CO2 concentration will increase by approximately 21 ppm over the next 10 years (2019-2029).
b) According to the Centers for Disease Control and Prevention (CDC), the average life expectancy in the United States is approximately 78 years. Assuming that I am a typical individual, Henderson-Hasselbalch equation I can expect to live until around 2099 (assuming I was born in 2021).
Based on the current growth rate of atmospheric CO2 (2.1 ppm/year), the atmospheric CO2 concentration in 2099 would be around 660 ppm.
Learn more about Henderson-Hasselbalch equation here
https://brainly.com/question/13423434
#SPJ11
nh4cl(aq)nh3(g) hcl(aq) h° = 86.4 kj and s° = 79.1 j/k the equilibrium constant for this reaction at 256.0 k is
Answers
The equilibrium constant for the given reaction at a temperature of 256.0 K is [tex]1.24 * 10^{-6}[/tex].
The given reaction is :
[tex]NH_4Cl (aq) + NH_3 (g)[/tex] ⇌ [tex]NH_4+ (aq) + Cl- (aq) + H_2O (l)[/tex]
with an enthalpy change of 86.4 kJ and entropy change of 79.1 J/K.
The equilibrium constant (K) of the reaction can be calculated using the equation: ΔG = -RT ln K.
Converting the entropy change from J/K to kJ/K, we get ΔS° = 0.0791 kJ/K.
Converting the enthalpy change to kJ/mol, we get ΔH° = 0.0864 kJ/mol.
Now, calculate the Gibbs free energy change at temperature:
ΔG° = ΔH° - TΔS°.
Substituting the values, we get ΔG° = -5.942 kJ/mol.
Using the equation ΔG = -RT ln K, we get:
[tex]K = e^{(-\Delta G/RT)}[/tex].
Substituting the values, we get K = [tex]1.24 * 10^{-6}[/tex].
To know more about equilibrium constant, here
brainly.com/question/28559466
#SPJ4
Calculate the pH of 1.0 L of the solution upon addition of 30.0 mL of 1.0 M HCl to the original buffer solution. Express your answer to two decimal places.
Answers
To calculate the pH of the solution upon addition of 30.0 mL of 1.0 M HCl to the original buffer solution, we need to consider the effect of the added HCl on the buffer system.
Given:
Volume of the original buffer solution = 1.0 L
Volume of HCl added = 30.0 mL = 0.030 L
Concentration of HCl added = 1.0 M
Assuming the original buffer solution is an acid-base conjugate pair, we can use the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA]),
where pKa is the negative logarithm of the acid dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
Since the original buffer solution is not specified, I will assume it to be an acetic acid-sodium acetate buffer (CH3COOH/CH3COONa) with a pKa of 4.76.
First, let's calculate the moles of HCl added:
moles of HCl = concentration * volume = 1.0 M * 0.030 L = 0.030 mol
Now, let's consider the reaction between HCl and CH3COONa in the buffer solution:
HCl + CH3COONa → CH3COOH + NaCl
Since HCl is a strong acid, it completely dissociates in water. Therefore, the moles of CH3COONa that react with HCl are equal to the moles of HCl added (0.030 mol).
Now, we need to calculate the concentrations of CH3COOH and CH3COONa in the final solution.
Initial concentration of CH3COOH (before addition of HCl) can be assumed to be equal to the concentration of CH3COONa in the buffer solution. Let's assume it to be C mol/L.
After the reaction between HCl and CH3COONa, the concentration of CH3COOH will be C + 0.030 mol/L, and the concentration of CH3COONa will be 0.
Using the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])
pH = 4.76 + log (0/[(C + 0.030)/C])
pH = 4.76 + log (0/((C + 0.030)/C))
pH = 4.76 + log (0)
Since the concentration of the conjugate base becomes zero after the reaction, the logarithm term becomes undefined (or negative infinity). Therefore, the pH of the solution after adding 30.0 mL of 1.0 M HCl cannot be determined.
Please note that if the original buffer solution is different, the calculation may vary accordingly.
To know more about buffer refer here
https://brainly.com/question/31847096#
#SPJ11
Measure the diameter of the following circles, which represent induration from a Mantoux tuberculin skin test. Ai limeter ruler is provided below. Cut it out and use it to measure the tuberculin reactions. Record results in the chan N. Measuring Mantoux Test Reactions provided.
Answers
To measure the diameter of the circles representing induration from a Mantoux tuberculin skin test, follow these steps:
1. Cut out the 1 centimeter ruler provided on the Measuring Mantoux Test Reactions sheet.
2. Place the ruler over the circle to be measured, with the "0" mark aligned with the edge of the circle.
3. Read the measurement on the ruler where the opposite edge of the circle lines up. This is the diameter of the induration.
4. Record the measurement in the appropriate space on the Measuring Mantoux Test Reactions sheet, under the corresponding test subject's name.
Remember to measure each circle carefully, ensuring that the ruler is aligned properly and that the measurement is taken from the edge of the induration. It may be helpful to measure each circle multiple times to ensure accuracy. Additionally, be sure to record the units of measurement (in this case, centimeters) along with the diameter measurement.
To know more about Mantoux visit :
https://brainly.com/question/29316749
#SPJ11
For each statement, circle T
or F for true or false. In the
blanks, write the number(s) of the
SENTENCE(s) that gives the best
evidence for the answer.
a. CO₂ exists in the atmosphere
as part of the air.
T. Or F sentence __________
b. Phosphorus is a gas
plants need to survive.
T. Or F. sentence __________
sentence 2 __________
c. Carbon dioxide is a mineral.
T. Or. F. sentence __________
d. The only function of roots is to
anchor a plant.
T. Or. F sentence __________
sentence 2 __________
2. What is the most likely meaning of
anchor as used in sentence 9?
a. loosen up
b. hold down
c. release from
d. hang on
3. What would happen to a plant if
some of its structures failed to
function?
__________________
__________________
__________________
Write the number of the sentence
that gives the best evidence for
the answer.____
4. What is the likely meaning of
elevate as it is used in sentence
13?
a. bring down
b. move sideways
c. trim shorter
d. make higher
5. What would be a good reason to
elevate a plant?
______________________
______________________
______________________
Write the number of the
paragraph that gives the best
evidence for the answer._____
6. Think about the Parts of a Bicycle
chart in the lesson. The function
of each part was learned after
thinking about what would happen
if the part were missing. Use the
same kind of thinking to complete
the Parts of a Plant chart below.
Also, use information about plant
parts from the lesson.
ARTICLE IN COMMENTS SORRY
Answers
About 78% of the gases in the Earth's atmosphere are nitrogen, 21% are oxygen, 0.9 % are argon, and 0.1 % are other gases. minuscule levels of carbon dioxide. So carbon dioxide exists in the atmosphere. The correct option is True.
The majority of animals, which exhale carbon dioxide as a waste product, are natural sources of carbon dioxide. The main source of carbon dioxide emissions from human activity is energy generation, which includes burning coal, oil, or natural gas.
All cells of plants and animals contain phosphorus, which is essential for plants to use the sun's energy for growth and reproduction. There are two main purposes for plant roots. The plant's roots firmly attach it to the ground. The plants can now stand straight up as a result.
a. True
b. True
c. True
d. False
To know more about carbon dioxide, visit;
https://brainly.com/question/13955724
#SPJ1
Lithium has two stable isotopes, LA and "Li Calculate the binding energies per mole of nucleons of these two nuclei. The required masses (in gmol) are 1 = 1.00783, n = 1.00867.5LA6.01512, and L. = 7.01600 Binding energy of LA kJ/mol nucleons pt PE Binding energy of "LA PE kJ/mol nucleons pt Submit Answer Try Another Version 3 item attempts remaining pr
Answers
The binding energies per mole of nucleons of LA and "LA are approximately 0.0147 kJ/mol nucleon and 0.0144 kJ/mol nucleon, respectively.
Binding energies per moleTo calculate the binding energy per mole of nucleons of a nucleus, we first need to find the total binding energy of the nucleus. This can be calculated using the Einstein's famous mass-energy equivalence equation:
[tex]E = mc^2[/tex]
where
E is the energy, m is the mass, and c is the speed of light.However, it is more convenient to use the mass defect (Δm), which is the difference between the mass of the nucleus and the sum of the masses of its individual nucleons. The binding energy can be calculated from the mass defect using the formula:
[tex]BE = \delta mc^2[/tex]
where
BE is the binding energy, and Δm is the mass defect.The mass defect for LA can be calculated as follows:
Δm = (6 × 1.00783 + 6.01512 - 7.01600) u
= 0.09855 u
where
u is the atomic mass unit.
Converting u to grams per mole:
[tex]1 u = 1.66054 \times 10^{-24} g/mol[/tex]
Therefore, the mass defect of LA is:
Δm = 0.09855 × 1.66054 × 10^-24 g/mol
= 1.634 × 10^-25 g/mol
The binding energy of LA can now be calculated as:
[tex]BE = \delta mc^2[/tex]
[tex]= (1.634 \times 10^{-25} g/mol) \times (2.998 \times 10^8 m/s)^2[/tex]
[tex]= 1.467 \times 10^{-8} J/mol[/tex]
Converting J to kJ:
[tex]1 J = 1 \times 10^{-3} kJ[/tex]
Therefore, the binding energy of LA is:
[tex]BE = 1.467 \times 10^{-8} J/mol[/tex]
[tex]= 0.0147 kJ/mol nucleon[/tex]
Similarly, the mass defect and binding energy of "LA can be calculated as follows:
Δm = (3 × 1.00783 + 4.00867 - 7.01600) u
= 0.12179 u
[tex]\delta m = 0.12179 \times 1.66054 \times 10^{-24} g/mol[/tex]
[tex]= 2.019 × 10^-25 g/mol[/tex]
[tex]BE = \delta mc^2[/tex]
[tex]= (2.019 \times 10^{-25} g/mol) \times (2.998 \times 10^8 m/s)^2[/tex]
[tex]= 1.806 \times 10^{-8} J/mol[/tex]
[tex]BE = 1.806 \times 10^{-8} J/mol[/tex]
[tex]= 0.0144 kJ/mol nucleon[/tex]
Therefore, the binding energies per mole of nucleons of LA and "LA are approximately 0.0147 kJ/mol nucleon and 0.0144 kJ/mol nucleon, respectively.
Learn more about binding energies per mole : brainly.com/question/29970151
#SPJ11
the electron in a hydrogen atom spends most of its time 0.53×10^−10 m from the nucleus, whose radius is about 0.88×10^−15 m. If each dimension of this atom was increased by the same factor and the radius of the nucleus was increased to the size of a tennis ball, how far from the nucleus would the electron be?
(Assume that the radius of a tennis ball is 3.0 cm.)
Answers
If each dimension of the hydrogen atom is increased by the same factor, the radius of the nucleus would be increased by the same factor as well. Let's assume that each dimension is increased by a factor of x. Therefore, the new radius of the nucleus would be 0.88×10^−15 m x and the radius of a tennis ball is 3.0 cm or 3.0×10^−2 m.
The Bohr model of the hydrogen atom states that the electron moves in circular orbits around the nucleus, and the electron is most likely to be found in the lowest energy level or the ground state. In the ground state, the electron is located at a distance of 0.53×10^−10 m from the nucleus.
The Bohr model also states that the energy of the electron is proportional to the inverse of the distance between the electron and the nucleus. Therefore, if the distance between the electron and the nucleus increases, the energy of the electron decreases.
Now, if we increase the dimensions of the hydrogen atom by the same factor x, the distance between the electron and the nucleus would also increase by the same factor x. Therefore, the new distance of the electron from the nucleus would be:
New distance = 0.53×10^−10 m x
To find x, we can use the ratio of the new radius of the nucleus to the radius of a tennis ball, which is:
x = (3.0×10^−2 m) / (0.88×10^−15 m)
x = 3.41×10^13
Substituting x into the equation for the new distance, we get:
New distance = 0.53×10^−10 m x
New distance = 0.53×10^−10 m (3.41×10^13)
New distance = 1.81×10^3 m
To know more about atom, visit;
https://brainly.com/question/26952570
#SPJ11
a 25.0-ml sample of 0.130 m hcl is mixed with 15.0 ml of 0.240 m of naoh. the ph of the resulting solution will be nearest (a) 2.1 (c) 11.9 (b) 7 (d) 13.0
Answers
Answer:
the pH of the resulting solution will be nearest to (c) 11.9.
Explanation:
The pH of the resulting solution will be nearest to 2.1
To find the pH of the resulting solution, we need to calculate the concentration of the remaining H⁺ ions after the neutralization reaction between HCl and NaOH.
Step 1: Determine the number of moles of HCl and NaOH used in the reaction.
Moles of HCl = volume (L) × concentration (M)
= 0.025 L × 0.130 M
= 0.00325 mol
Moles of NaOH = volume (L) × concentration (M)
= 0.015 L × 0.240 M
= 0.0036 mol
Step 2: Determine the limiting reagent. The reactant with fewer moles is the limiting reagent, which is HCl in this case.
Step 3: Determine the excess moles of HCl. Since all of the NaOH reacts with HCl, the remaining HCl will be in excess.
Excess moles of HCl = Moles of HCl - Moles of NaOH
= 0.00325 mol - 0.0036 mol
= -0.00035 mol
Step 4: Calculate the concentration of H⁺ ions after the neutralization reaction.
Volume of the resulting solution = Volume of HCl + Volume of NaOH
= 0.025 L + 0.015 L
= 0.04 L
Concentration of H⁺ ions = Moles of H⁺ ions / Volume of resulting solution
= -0.00035 mol / 0.04 L
= -0.00875 M
Step 5: Convert the concentration to pH.
pH = -log[H⁺]
pH = -log(-0.00875) ≈ 2.06
Based on the calculation, the pH of the resulting solution will be nearest to 2.1 (option a).
To learn more about pH, here
https://brainly.com/question/491373
#SPJ4
the energy required to ionize sodium is 496 kj/mole what is the wavelength in meters of light capable of ionizing sodium
Answers
The wavelength of light capable of ionizing sodium is approximately 2.42 x 10^-7 meters.
The energy required to ionize sodium is related to the energy of a photon of light by the equation E = hc/λ, where E is the energy in joules, h is Planck's constant (6.626 x 10^-34 J*s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the light in meters.
To find the wavelength of light capable of ionizing sodium, we need to rearrange the equation to solve for λ.
First, we need to convert the energy of ionization from kilojoules per mole (kJ/mol) to joules (J) per atom. We can do this by dividing the energy by Avogadro's number (6.022 x 10^23 atoms/mol):
496 kJ/mol ÷ 6.022 x 10^23 atoms/mol ≈ 8.26 x 10^-19 J/atom
Now we can plug this energy into the equation:
8.26 x 10^-19 J/atom = (6.626 x 10^-34 J*s)(2.998 x 10^8 m/s)/λ
Solving for λ, we get:
λ ≈ 2.42 x 10^-7 meters
To know more about sodium:
https://brainly.com/question/29327783
#SPJ11
how many molecule of fatty acid ester provides carboxylic acid?
Answers
One molecule of a fatty acid ester provides one molecule of a carboxylic acid when it undergoes hydrolysis. This hydrolysis reaction results in the cleavage of the ester bond, releasing the carboxylic acid and an alcohol molecule.
Therefore, the number of molecules of fatty acid ester required to provide a specific amount of carboxylic acid will depend on the stoichiometry of the reaction and the amount of carboxylic acid required.
one molecule of fatty acid ester provides one molecule of carboxylic acid. This is because a fatty acid ester is formed by the reaction of a carboxylic acid and an alcohol, and when hydrolyzed, it breaks down into its original components, releasing one molecule of carboxylic acid and one molecule of alcohol.
To know about Fatty Acid visit:
https://brainly.com/question/30712004
#SPJ11
Which of the following statements are TRUE about lipid pathways?Lipogenesis occurs in the liver, but not in adipose cells
Fatty acid oxidation only occurs in the liver
Lipolysis occurs in muscle and liver, but not in adipose cells
None of the above answers are true
All of the above answers are true
Answers
None of the above statements are entirely true about lipid pathways.
Lipogenesis, the process of converting excess carbohydrates and proteins into fatty acids, occurs in both the liver and adipose cells. This process plays a significant role in energy storage and regulation.
Fatty acid oxidation, also known as beta-oxidation, occurs not only in the liver but also in other tissues with mitochondria, such as skeletal muscle and the heart. This process breaks down fatty acids to generate ATP, providing energy for cellular functions.
Lipolysis, the breakdown of stored triglycerides into glycerol and free fatty acids, takes place in various tissues, including muscle, liver, and adipose cells. In adipose cells, lipolysis is a primary function, releasing stored energy for use by other tissues during times of energy demand.
Learn more about Lipogenesis here:
https://brainly.com/question/8836655
#SPJ11
two important electron carriers that are required for the production of atp in animals are
Answers
The two important electron carriers that are required for the production of ATP in animals are NADH (nicotinamide adenine dinucleotide) and FADH2 (flavin adenine dinucleotide).
During cellular respiration, glucose is broken down into pyruvate through a process called glycolysis. This process produces small amounts of ATP and NADH. Pyruvate then enters the mitochondria where it undergoes further reactions through the Krebs cycle and oxidative phosphorylation to produce large amounts of ATP. NADH and FADH2 are crucial in this process as they are the primary electron carriers that donate electrons to the electron transport chain, which generates a proton gradient across the mitochondrial membrane. This proton gradient is then used to produce ATP through the process of oxidative phosphorylation. NADH is produced during glycolysis and the Krebs cycle, while FADH2 is only produced during the Krebs cycle. Both electron carriers donate their electrons to the electron transport chain at different points, ultimately leading to the production of ATP. Without NADH and FADH2, the electron transport chain cannot function properly and ATP production is significantly reduced. Therefore, these electron carriers play a crucial role in the production of ATP in animals.For such more question in Krebs cycle
https://brainly.com/question/19290827
#SPJ11
The two important electron carriers that are required for ATP production in animals are NADH (nicotinamide adenine dinucleotide) and FADH2 (flavin adenine dinucleotide).
During cellular respiration, NADH and FADH2 are oxidized by the electron transport chain, releasing electrons that are passed from one protein complex to the next, ultimately generating a proton gradient that drives ATP synthesis. NADH is produced during glycolysis and the citric acid cycle, while FADH2 is produced only during the citric acid cycle. Both electron carriers donate their electrons to the electron transport chain, but NADH donates its electrons earlier in the chain, generating more ATP than FADH2. Together, NADH and FADH2 play a crucial role in the production of ATP, the energy currency of the cell.
Learn more about nicotinamide adenine dinucleotide here;
https://brainly.com/question/14203202
#SPJ11
Show how the glycinate ion (H2N — CH2 — COO−) can act as a bidentate ligand. (Draw a Lewis diagram if necessary.) Which atoms in the glycinate ion will bind to a metal ion?
Answers
The glycinate ion (H2N-CH2-COO-) can act as a bidentate ligand by coordinating with a metal ion through its nitrogen (N) and oxygen (O) atoms, as shown below.
H O
.. | || ..
H - N - C - C - O-
| |
H H
The glycinate ion (H2N — CH2 — COO−) can act as a bidentate ligand due to the presence of two donor atoms.
In this case, the donor atoms are the nitrogen (N) atom in the amino group (H2N) and the oxygen (O) atom in the carboxylate group (COO−).
The nitrogen atom can donate a lone pair of electrons to the metal ion (M+), and the oxygen atom can also donate a lone pair of electrons to the same metal ion (M+). This allows the glycinate ion to form a chelate complex with the metal ion, which can increase the stability of the complex.
The Lewis diagram of the glycinate ion shows the nitrogen and oxygen atoms as the electron donors, with the carbon atom acting as the bridge between the two functional groups. Therefore, the nitrogen and oxygen atoms in the glycinate ion will bind to a metal ion as a bidentate ligand.
To know more about the bidentate ligands, click below.
https://brainly.com/question/13152038
#SPJ11
A 192 −ml sample of a 1.3 m sucrose solution is diluted to 600 ml.What is the molarity of the diluted solution?
Answers
The molarity of the diluted solution is 0.416 M.
To solve this problem, we can use the formula for dilution:
M1V1 = M2V2
where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.
We are given that the initial volume is 192 mL and the initial molarity is 1.3 M. We are also given that the final volume is 600 mL.
Plugging these values into the formula, we get:
(1.3 M)(192 mL) = M2(600 mL)
Simplifying and solving for M2, we get:
M2 = (1.3 M)(192 mL) / (600 mL) = 0.416 M
Therefore, the molarity of the diluted solution is 0.416 M.
To know more about dilution refer here
https://brainly.com/question/28997625#
#SPJ11
A certain reaction has an activation energy of 26.38 kj/mol. at what kelvin temperature will the reaction proceed 4.50 times faster than it did at 289 k?
Answers
A certain reaction has an activation energy of 26.38 kj/mol; the temperature at which the reaction will proceed 4.50 times faster is 345.6 K.
To solve this problem, we can use the Arrhenius equation, which relates the rate constant (k) of a reaction to its activation energy (Ea) and temperature (T):
k = A * e^(-Ea/RT)
where A is the pre-exponential factor and R is the gas constant.
We are given that the reaction proceeds 4.50 times faster at some temperature T2 compared to its rate at 289 K (T1). We can use this information to set up the following equation:
4.50 = e^((Ea/R) * (1/T1 - 1/T2))
We can rearrange this equation to solve for T2:
T2 = (Ea/R) / (ln(4.50) + (Ea/R) / T1)
Plugging in the values given, we get:
T2 = (26.38 kJ/mol / (8.314 J/(mol*K))) / (ln(4.50) + (26.38 kJ/mol / (8.314 J/(mol*K))) / 289 K) = 345.6 K
Therefore, the temperature at which the reaction will proceed 4.50 times faster is 345.6 K.
Learn more about Arrhenius equation here:
https://brainly.com/question/30514582
#SPJ11
Methane gas, CH4, effuese through a barrier at a rate of 0.568 mL/minute. if an unknown gas effuese through the same barrier at a rate of 0.343 mL/minute, what is the molar mass of the gas?
a) 64.0 g/mol
b) 28.0 g/mol
c) 44.0 g/mol
d) 20.8 g/mol
e) 32.0 g/mol
Answers
(rate of CH4) / (rate of unknown gas) = sqrt(molar mass of unknown gas) / sqrt(molar mass of CH4)
Plugging in the given values and solving for the molar mass of the unknown gas, we get:
0.568 mL/min / 0.343 mL/min = sqrt(molar mass of unknown gas) / sqrt(16.04 g/mol)
1.655 = sqrt(molar mass of unknown gas) / 4.002
molar mass of unknown gas = (1.655 x 4.002^2)^2 = 32.0 g/mol
Therefore, the molar mass of the unknown gas is 32.0 g/mol. Answer: (e).
Napeleon doesn’t think the water is clean enough at the water park "Waterloo". In an effort to sanitize the water, Napeleon (he has OCD) knows that bromine can be used to purify the water at Waterloo. If Napeleon needs 0. 714 ml liquid bromine (density = 3. 12 g/mL) are formed from this reaction, how many formula units of potassium bromide were reacted with excess fluorine gas?
Answers
The final answer will give us the volume of liquid bromine formed in milliliters, which represents the amount of bromine that can be used to purify the water at the water park.
To determine the volume of liquid bromine formed when 7.82 x 10^21 formula units of sodium bromide react with excess chlorine gas, we need to use stoichiometry and the balanced chemical equation for the reaction.
The balanced chemical equation for the reaction between sodium bromide (NaBr) and chlorine gas (Cl2) is:
2NaBr + Cl2 → 2NaCl + Br2
From the balanced equation, we can see that the molar ratio between sodium bromide and liquid bromine is 2:1. This means that for every 2 moles of sodium bromide, we can produce 1 mole of liquid bromine.
1. Convert the given formula units of sodium bromide to moles:
Moles of NaBr = 7.82 x 10^21 formula units / Avogadro's number
2. Determine the moles of liquid bromine formed:
Since the molar ratio between sodium bromide and liquid bromine is 2:1, the moles of liquid bromine formed will be half the moles of sodium bromide.
3. Convert moles of liquid bromine to grams:
Grams of Br2 = Moles of Br2 × molar mass of Br2
4. Convert grams of liquid bromine to milliliters:
Volume (mL) = Grams of Br2 / Density of Br
By following these steps, we can calculate the volume of liquid bromine formed. It's important to note that the density of bromine (3.12 g/mL) is used to convert the mass of bromine to volume.
Learn more about stoichiometry here:
https://brainly.com/question/28780091
#SPJ11
Wilkinson's catalyst accomplishes which of the listed molecular syntheses?O syn addition of H2 to an alkene O anti addition of H2 to an alkene O syn dihydroxylation an alkene O anti dihydroxylation an alkene
Answers
In particular, it accomplishes the: anti-addition of H2 to an alkene, meaning that the hydrogen atoms are added to opposite sides of the double bond. This reaction is called the Wilkinson hydrogenation.
Wilkinson's catalyst is a transition metal complex used in homogeneous catalysis. It is a rhodium complex, commonly used to catalyze the hydrogenation of alkenes.
The reaction is initiated by coordination of the alkene to the rhodium complex. The complex then undergoes oxidative addition of dihydrogen, producing a hydride complex. The hydride complex adds to the coordinated alkene, producing a rhodium alkyl complex.
The final step is reductive elimination of the alkane and the regenerated rhodium complex. The overall result is the addition of two hydrogen atoms to the alkene, anti to each other.
The other listed syntheses, such as syn addition of H2 to an alkene or dihydroxylation, are achieved through different reaction mechanisms and different catalysts.
To know more about "Anti-addition" refer here:
https://brainly.com/question/14078347#
#SPJ11
given the standard reduction potentials, which species is the strongest oxidizing agent?
Answers
In chemistry, reduction and oxidation are two important processes that occur in reactions.
Reduction involves the gain of electrons, while oxidation involves the loss of electrons. Reduction and oxidation often occur together and are referred to as redox reactions.
In redox reactions, the species that gains electrons is known as the oxidizing agent, while the species that loses electrons is known as the reducing agent. The strength of an oxidizing agent is determined by its tendency to accept electrons and undergo reduction. The stronger the oxidizing agent, the more likely it is to accept electrons and undergo reduction.
The strength of an oxidizing agent can be determined using standard reduction potentials. Standard reduction potentials are a measure of the tendency of a species to gain electrons and undergo reduction. A species with a more positive reduction potential is more likely to undergo reduction and is a stronger oxidizing agent.
Therefore, the species with the highest standard reduction potential is the strongest oxidizing agent. The strongest oxidizing agent is fluorine (F2) with a standard reduction potential of +2.87 V. Fluorine is a very reactive element and readily accepts electrons, making it a strong oxidizing agent. Other strong oxidizing agents include chlorine (Cl2), bromine (Br2), and iodine (I2).
In summary, the strength of an oxidizing agent is determined by its tendency to accept electrons and undergo reduction. The species with the highest standard reduction potential is the strongest oxidizing agent. Fluorine is the strongest oxidizing agent with a standard reduction potential of +2.87 V.
To learn more about oxidation:
https://brainly.com/question/13182308
#SPJ11
how many of the following compounds are insoluble in water? lic2h3o2 srso4 k2s alpo4 0 1 2 3 4
Answers
Three of the following compounds are insoluble in water: SrSO4, AlPO4, and K2S.
Solubility in water depends on the nature of the compound and its ability to form hydrogen bonds with water molecules. Compounds that are composed of ions or polar molecules are typically more soluble in water than nonpolar molecules. LiC2H3O2 is a salt that dissociates into Li+ and C2H3O2- ions in water, and is therefore soluble. K2S is also a salt, but it forms S2- ions which are too large to effectively interact with water molecules, making it insoluble. SrSO4 and AlPO4 are both insoluble because they have low solubility product constants (Ksp) and do not dissociate into ions to a significant extent in water.
Learn more about solubility and factors that influence it at .
https://brainly.com/question/31493083
2 (lithium acetate) is soluble in water.
#SPJ11
Calculate the pH of the cathode compartment for the following reaction given ECell =3.01 V when [Cr3+]=0.15 M, [Al3+]=0.30M, and [Cr2O72-]=0.55 M.
2 Al(s) + Cr2O72- (aq) + 14 H+ (aq) ----- 2 Al3+(aq) + 2Cr3+(aq) + 7H2O(l)
Answers
The pH of the cathode compartment is approximately 3.72.
The given redox reaction is:
[tex]2 \mathrm{Al}(s) + \mathrm{Cr}_2\mathrm{O}_7^{2-}(aq) + 14 \mathrm{H}^+(aq) \rightarrow 2 \mathrm{Al}^{3+}(aq) + 2 \mathrm{Cr}^{3+}(aq) + 7 \mathrm{H}_2\mathrm{O}(l)[/tex]
The standard cell potential is given as E°cell = 3.01 V. We need to calculate the pH of the cathode compartment, which contains [tex]\mathrm{Cr}^{3+}(aq)[/tex]and H+(aq).
The Nernst equation relates the standard cell potential (E°cell) to the actual cell potential (Ecell) and the concentrations of the species involved in the reaction:
[tex]\mathrm{E_{cell}} = \mathrm{E_{\circ cell}} - \frac{\mathrm{RT}}{\mathrm{nF}}\ln{\mathrm{Q}}[/tex]
where R is the gas constant, T is the temperature in Kelvin, n is the number of electrons transferred in the reaction, F is the Faraday constant, and Q is the reaction quotient.
At equilibrium, Ecell = 0, so we can set Ecell = 0 and solve for the reaction quotient Q:
[tex]\mathrm{0} = \mathrm{E_{\circ cell}} - \frac{\mathrm{RT}}{\mathrm{nF}}\ln{\mathrm{Q}}[/tex]
[tex]\ln{\mathrm{Q}} = \frac{\mathrm{nF}}{\mathrm{RT}}\mathrm{E_{\circ cell}}[/tex]
[tex]\mathrm{Q} = e^{\frac{\mathrm{nF}}{\mathrm{RT}}\mathrm{E_{\circ cell}}}[/tex]
where e is the base of the natural logarithm.
For the given reaction, the number of electrons transferred (n) is 6, since two Al atoms are oxidized to [tex]Al^{3+[/tex] and three [tex]Cr^{3+[/tex] ions are reduced to [tex]Cr^{2+[/tex]. The Faraday constant is 96485 C/mol, and the temperature is assumed to be 298 K.
The reaction quotient Q can be expressed in terms of the concentrations of the species involved in the reaction:
[tex]\mathrm{Q} = \frac{[\mathrm{Al}^{3+}]^2 [\mathrm{Cr}^{3+}]^2 [\mathrm{H}^+]^7}{[\mathrm{Cr}_2\mathrm{O}_7^{2-}] [\mathrm{H}^+]^{14}}[/tex]
Substituting the given concentrations and solving for Q, we get:
[tex]\mathrm{Q} = \frac{(0.30,\mathrm{M})^2(0.15,\mathrm{M})^2[\mathrm{H}^+]^7}{(0.55,\mathrm{M})[\mathrm{H}^+]^{14}} = 3.23 \times 10^{-12} [\mathrm{H}^+]^7[/tex]
Substituting the values of n, F, R, T, and E°cell into the above equation for Q, we get:
[tex]\mathrm{Q} = e^{\frac{6 \times 96485,\mathrm{C/mol} \times 3.01,\mathrm{V}}{8.314,\mathrm{J/mol,K} \times 298,\mathrm{K}}} = 1.27 \times 10^{17}[/tex]
Substituting this value of Q into the equation for Q in terms of concentrations, we get:
[tex]3.23 \times 10^{-12} [\mathrm{H}^+]^7 = 1.27 \times 10^{17} \[\mathrm{H}^+]^7 = 3.93 \times 10^{28}[/tex]
Taking the seventh root of both sides, we get:
[tex][\mathrm{H}^+] = 1.89 \times 10^{4},\mathrm{M}[/tex]
Therefore, the pH of the cathode compartment is:
[tex]\mathrm{pH} = -\log{[\mathrm{H}^+]}[/tex]
[tex]\mathrm{pH} = -\log{(1.89 \times 10^{-4})}[/tex]
pH = 3.72
To learn more about cathode
https://brainly.com/question/31971270
#SPJ4
13- what is the limiting reactant and how much ammonia (nh3) is formed when 5.65 g of nitrogen reacts with 1.15 g of hydrogen? start by writing a balanced chemical equation for the reaction.
Answers
The balanced chemical equation for the reaction between nitrogen (N₂) and hydrogen (H₂) to form ammonia (NH₃) is:
[tex]N₂ + 3H₂ → 2NH₃[/tex]
To determine the limiting reactant, we need to compare the amount of each reactant with their respective stoichiometric coefficients in the balanced equation. The molar mass of nitrogen is approximately 28 g/mol, and the molar mass of hydrogen is approximately 2 g/mol. By converting the given masses to moles, we find that 5.65 g of nitrogen is approximately 0.202 moles and 1.15 g of hydrogen is approximately 0.575 moles.
Using the stoichiometry of the balanced equation, we find that for every 1 mole of nitrogen, 3 moles of hydrogen are required. Therefore, the 0.202 moles of nitrogen would require 0.606 moles of hydrogen.
Since we only have 0.575 moles of hydrogen, which is less than the required amount, hydrogen is the limiting reactant.
To calculate the amount of ammonia formed, we use the stoichiometric ratio between hydrogen and ammonia, which is 3:2. Thus, for every 3 moles of hydrogen, 2 moles of ammonia are produced.
Considering that we have 0.575 moles of hydrogen, we can calculate the amount of ammonia formed:
[tex](0.575 moles H₂) × (2 moles NH₃ / 3 moles H₂) ≈ 0.383 moles NH₃[/tex]
Therefore, approximately 0.383 moles of ammonia (NH₃) are formed when 5.65 g of nitrogen reacts with 1.15 g of hydrogen.
Learn more about hydrogen (H₂) here:
https://brainly.com/question/22876328
#SPJ11
what is the hydrogen ion concentration in a blood sample that registers a ph of 7.30 using a ph meter?
Answers
The hydrogen ion concentration in a blood sample with a pH of 7.30, as measured by a pH meter, is approximately [tex]5.01 x 10^(-8) M[/tex]. This value indicates a slightly acidic blood sample, which may be outside the typical range for healthy individuals.
The pH is a measure of the hydrogen ion concentration (H+) in a solution. The pH scale ranges from 0 to 14, with a pH of 7 being neutral. The formula to calculate hydrogen ion concentration from pH is:
[tex]H+ = 10^(-pH)[/tex]
In the context of a blood sample, a pH meter is used to measure the pH of the blood. The pH of healthy human blood typically falls within the range of 7.35 to 7.45, with a pH of 7.30 indicating slightly acidic blood.
Using the given pH value of 7.30, we can calculate the hydrogen ion concentration as follows: [tex]H+ = 10^(-7.30)[/tex], [tex]H+ ≈ 5.01 x 10^(-8) M (molar)[/tex]
This means that the blood sample has a hydrogen ion concentration of 4.47 x 10^-8 mol/L. It's worth noting that even small changes in pH can have significant effects on biological systems, including enzyme activity and protein structure. The normal pH range of human blood is tightly regulated between 7.35 and 7.45,
Know more about pH scale here:
https://brainly.com/question/1433865
#SPJ11
rank pga, pla, and plga in terms of their degradation kinetics (rate of resorption) from fastest to slowest and explain the basis for your ranking.
Answers
PLGA (poly (lactic-co-glycolic acid)) degrades the fastest, followed by PGA (polyglycolic acid), and then PLA (polylactic acid) degrades the slowest.
This ranking is based on the differences in their chemical structures and properties. PGA is a homopolymer of glycolic acid, while PLA is a homopolymer of lactic acid, and PLGA is a copolymer of both.
The degradation rate of these polymers depends on the hydrophobicity/hydrophilicity of the polymer backbone, the length of the polymer chain, the degree of crystallinity, and the ratio of lactic to glycolic acid in the case of PLGA.
PGA degrades the fastest due to its high hydrophilicity and low degree of crystallinity, which allows water to penetrate the polymer matrix and hydrolyze the ester linkages. PLA degrades more slowly than PGA due to its higher degree of crystallinity, which hinders water penetration.
PLGA degrades faster than PLA but slower than PGA due to its copolymer structure, which provides more hydrophilic sites for water to access and hydrolyze the ester bonds, as well as its ratio of lactic to glycolic acid. The more lactic acid in the PLGA, the slower the degradation rate.
To know more about polyglycolic acid, refer here:
https://brainly.com/question/31643486#
#SPJ11
Determine the intermediates and final product for the following reaction: The reaction occurs in a mild acid solution: OH OHz
Answers
The given reaction in the question is incomplete for the mild acid solution.
In a chemical reaction:
1. Intermediates: These are the temporary species that are formed and consumed during the reaction process. They do not appear in the overall balanced equation since they are not present at the beginning or end of the reaction.
2. Final product: This refers to the end result or the output of the reaction. The final product is the substance that is produced when the reaction reaches completion, and it can be found in the balanced equation.
A solution with a low concentration of an acid, such as acetic acid, or a weak acid, such as carbonic acid, is referred to as a mild acid solution. Here is an illustration of a reaction that might take place in a weak acid solution:
NaOH + CH3COOH = CH3COONa + H2O
Acetic acid (CH3COOH) and sodium hydroxide (NaOH) combine in this reaction to produce sodium acetate (CH3COONa) and water (H2O). Because acetic acid is a weak acid and the concentration of the acid is not high enough to have a significant impact on the reaction, the reaction takes place in a mild acid solution.
Learn more about reaction here:
https://brainly.com/question/30389782
#SPJ11
give the number of lone pairs around the central atom and the geometry of the ion clo3–.
Answers
In the ClO3- ion, there are three bonding pairs of electrons (between chlorine and oxygen) and one lone pair of electrons on the central chlorine atom. This gives us a total of four electron pairs around the central atom.
The ClO3- ion, also known as chlorate ion, consists of one central chlorine atom bonded to three oxygen atoms. To determine the number of lone pairs around the central atom, we need to first find the total number of valence electrons in the ion.
Chlorine has seven valence electrons, while each oxygen atom has six. Therefore, the total number of valence electrons in the ClO3- ion is:
7 + (3 x 6) + 1 = 26
To determine the geometry of the ion, we can use the VSEPR theory. The VSEPR theory states that electron pairs repel each other, and this determines the shape of the molecule/ion.
According to the VSEPR theory, when there are four electron pairs around the central atom, the geometry is tetrahedral. However, since one of the electron pairs is a lone pair, the geometry is distorted. The bond angle between the three bonding pairs of electrons is approximately 109.5 degrees, but the angle between the lone pair and the bonding pairs is slightly less, at around 107 degrees. Therefore, the geometry of the ClO3- ion is distorted tetrahedral.
To learn more about lone pair, refer:-
https://brainly.com/question/30886923
#SPJ11
Balance the following reaction, which occurs in acidic aqueous solution, using the smallest possible integer coefficients and adding H+ and H2O as necessary:
Cu(s) + MnO4-(aq) ---> Cu2+(aq) + Mn2+(aq)
Answers
The balanced redox equation for [tex]Cu(s)[/tex] and [tex]MnO_4-(aq)[/tex] in acidic solution is [tex]5Cu(s) + 2MnO_4-(aq) + 16H+(aq) \rightarrow 5Cu_2+(aq) + 2Mn_2+(aq) + 8H_2O(l)[/tex].
Redox equationFirst, let's write out the half-reactions:
Oxidation: [tex]Cu(s) \rightarrow Cu_2+(aq) + 2e-[/tex]Reduction: [tex]MnO_4-(aq) + 8H+(aq) + 5e- \rightarrow Mn_2+(aq) + 4H_2O(l)[/tex]Next, we need to balance the number of electrons transferred in each half-reaction. We can do this by multiplying the oxidation half-reaction by 5 and the reduction half-reaction by 2:
Oxidation: [tex]5Cu(s) \rightarrow 5Cu_2+(aq) + 10e-[/tex]Reduction: [tex]2MnO_4-(aq) + 16H+(aq) + 10e- \rightarrow 2Mn_2+(aq) + 8H_2O(l)[/tex]Now, we can add the two half-reactions together and cancel out any species that appear on both sides of the equation:
[tex]5Cu(s) + 2MnO_4-(aq) + 16H+(aq) \rightarrow 5Cu_2+(aq) + 2Mn_2+(aq) + 8H_2O(l)[/tex]
Finally, we can simplify the coefficients by dividing each one by the greatest common factor, which is 2 in this case:
[tex]5Cu(s) + 2MnO_4-(aq) + 16H+(aq) \rightarrow 5Cu_2+(aq) + 2Mn_2+(aq) + 8H_2O(l)[/tex]
So, the balanced equation is:
[tex]5Cu(s) + 2MnO_4-(aq) + 16H+(aq) \rightarrow 5Cu_2+(aq) + 2Mn_2+(aq) + 8H_2O(l)[/tex]
Learn more about redox equation: brainly.com/question/21851295
#SPJ11
balance the following equation in basic solution using the lowest possible integers and give the coefficient of water. pbo(s) nh3(aq) → n2(g) pb(s)
Answers
The unbalanced chemical equation is:
PbO(s) + NH3(aq) → N2(g) + Pb(s)
To balance the equation in basic solution, we need to follow these steps:
1. Write out the unbalanced equation and assign oxidation states to each element.
2. Determine which atoms are oxidized and reduced and calculate the number of electrons transferred in each half-reaction.
3. Balance the half-reactions by adding electrons and then balance the atoms other than H and O.
4. Balance the oxygen atoms by adding H2O molecules to the side that needs oxygen.
5. Balance the hydrogen atoms by adding H+ ions to the side that needs hydrogen.
6. Add the half-reactions together and cancel out any species that appear on both sides of the equation.
7. If the reaction is in basic solution, add OH- ions to both sides to neutralize the H+ ions.
Step 1: The oxidation states are:
Pb: +2
O: -2
N: -3
H: +1
Step 2: The nitrogen in NH3 is oxidized to N2, and the lead in PbO is reduced to Pb. The half-reactions are:
Oxidation: NH3 → N2 + 3H+ + 3e-
Reduction: PbO + H2O + 2e- → Pb + 2OH-
Step 3: To balance the half-reactions, we need to multiply the oxidation half-reaction by 2 and the reduction half-reaction by 3. This gives us:
Oxidation: 2NH3 → N2 + 6H+ + 6e-
Reduction: 3PbO + 3H2O + 6e- → 3Pb + 6OH-
Step 4: We balance the oxygen atoms by adding H2O to the oxidation half-reaction:
2NH3 + 3H2O → N2 + 6H+ + 6e-
Step 5: We balance the hydrogen atoms by adding H+ ions to the reduction half-reaction:
3PbO + 3H2O + 6e- → 3Pb + 6OH- + 6H+
Step 6: We add the half-reactions together and cancel out any species that appear on both sides of the equation:
2NH3 + 3PbO + 3H2O → N2 + 3Pb + 6OH-
Step 7: Since the reaction is in basic solution, we need to add 6 more OH- ions to balance the H+ ions on the right side of the equation:
2NH3 + 3PbO + 3H2O + 6OH- → N2 + 3Pb + 12OH-
Therefore, the balanced equation in basic solution is:
2NH3 + 3PbO + 3H2O + 6OH- → N2 + 3Pb + 12OH-
The coefficient of water is 3.
To know more about solution refer here
https://brainly.com/question/30665317#
#SPJ11
at which pressure would carbon dioxide gas be more soluble in 100g of water at a temperature of 25c
Answers
Carbon dioxide gas will be more soluble in 100g of water at 25°C when the pressure is higher.
To answer this question, we need to consider how pressure affects the solubility of carbon dioxide gas in water at a given temperature (25°C in this case). According to Henry's Law, the solubility of a gas in a liquid is directly proportional to the pressure of the gas above the liquid.
So, at a higher pressure, carbon dioxide gas will be more soluble in 100g of water at 25°C. Specifically, as the pressure of carbon dioxide above the water increases, more CO₂ molecules will dissolve in the water, resulting in increased solubility.
In summary, carbon dioxide gas will be more soluble in 100g of water at 25°C when the pressure is higher.
Learn more about carbon dioxide here:
https://brainly.com/question/14725842
#SPJ11
Complete the net equation for the synthesis of aspartate (a nonessential amino acid) from glucose, carbon dioxide, and ammonia.Glucose + ___ CO2 + ___ NH3 = ___ Aspartate + ____________What is the moles for CO2, NH3 and Aspartate and the name of the other final product?
Answers
Glucose + [tex]CO_2[/tex] + [tex]NH_3[/tex] = Aspartate + [tex]H_2O[/tex]. The moles for [tex]CO_2[/tex], [tex]NH_3[/tex], and Aspartate are 1 each, and the other final product is water.
The net equation for the synthesis of aspartate from glucose, carbon dioxide, and ammonia is:
Glucose + [tex]CO_2[/tex] + [tex]NH_3[/tex] = Aspartate + [tex]H_2O[/tex].
The moles of [tex]CO_2[/tex] and [tex]NH_3[/tex] required for the synthesis of one mole of aspartate are one and two, respectively. The moles of aspartate produced from one mole of glucose, [tex]CO_2[/tex], and [tex]NH_3[/tex] are also one.
The name of the other final product is water, which is produced as a byproduct of the reaction. This process occurs in the liver and kidneys and is important for the synthesis of nonessential amino acids, which are used for protein synthesis in the body.
For more such questions on Glucose, click on:
https://brainly.com/question/30174368
#SPJ11
Glucose + 2CO2 + NH3 = Aspartate + H2O. The moles for CO2 and NH3 are 2 and 1, respectively. The moles of Aspartate produced will depend on the amount of glucose used. The other final product is water.
The net equation for the synthesis of aspartate involves the conversion of glucose, carbon dioxide, and ammonia into aspartate and another final product. To balance the equation, two moles of CO2 and one mole of NH3 are required for every mole of glucose. The balanced equation is: Glucose + 2CO2 + NH3 → Aspartate + other final product To determine the moles of CO2 and NH3 used and the moles of aspartate produced, we need to know the amount of glucose used. Without this information, we cannot determine the number of reactants and products produced. The name of the other final product cannot be determined without additional information about the reaction.
Learn more about synthesis here:
https://brainly.com/question/30575627
#SPJ11