How would you calculate an object's mechanical energy?
a. Add its kinetic and potential energies. b. Multiply its kinetic and potential energies.
c. Subtract its kinetic energy from its kinetic energy.
d. Subtract its potential energy from its kinetic energy.​

Answer:

The "Bohr Model", works only for hydrogen because it considers only the "interactions" between one electron and the nucleus.

Explanation:

$*

Answer:

7836.6 J

Explanation:

The following data were obtained from the question:

Heat of fusion (Hf) = 0.148 KJ/g

Mass (m) = 52.95 g

Heat (Q) required =..?

The heat (Q) required to melt the sample of nephthalene can be obtained as follow:

Q = m·Hf

Q = 52.95 × 0.148

Q = 7.8366 KJ

Finally, we shall convert 7.8366 KJ to Joule (J) in order to obtain the desired result. This can be obtained as follow:

1 kJ = 1000 J

Therefore,

7.8366 KJ = 7.8366 KJ × 1000 J / 1 KJ

7.8366 KJ = 7836.6 J

Therefore, 7.8366 KJ is equivalent to 7836.6 J

Thus, 7836.6 J of heat energy is required to melt the sample of nephthalene.

The heat required for melting of 52.95 g of naphthalene has been 7.8366 kJ.

The heat of fusion has been the energy required by 1g for the change in the substance.

The heat required to melt naphthalene can be given as:

Heat = mass × Heat of fusion

The given mass = 52.95 g

The heat of fusion = 0.148 kJ/g

The heat required can be given as:

Heat = 0.148 × 52.95 kJ

Heat = 7.8366 kJ.

The heat required for melting of 52.95 g of naphthalene has been 7.8366 kJ.

For more information about the heat of fusion, refer to the link:

https://brainly.com/question/25475410

Answer:

Lithium (Li)

Explanation:

It has an atomic number of 3.

Answer:

I hope this helped :)

Explanation:

a=f/m

a=3.5N/.25 kg

a=14m/s2

The acceleration of the volleyball is 14 m/s²

A force is defined to be a pull or a push acting on an object. The force exerted on an object can be said to be determined if the mass of the object is known.

It can be calculated by using the expression;

Force (F) = mass (m) × acceleration (a)

From the given information;

∴

The acceleration of the above expression can be computed as:

acceleration (a) = Force (F) / mass (a)

acceleration (a) = 3.5 / 0.25

acceleration (a) = 14 m/s²  

Learn more about force here:

https://brainly.com/question/12970081

Answer:  Since, the given weight of methane is 16 g, hence the water produced by the combustion of 16 g of methane is 36 g.

Explanation: Have a blessed day!

parts per million (ppm), parts per billion (ppb) and parts per trillion (ppt) are the most commonly used terms to describe very small amounts of substances. a ppm of a chemical in water means that, in a million units of water, there would only be one unit of the chemical.

Answer:

B

Explanation:

The front brain(cerebrum) is the part of the brain that controls important cognitive skills in humans, such as emotional expression, problem solving, memory, language, judgment, and sexual behaviors.

Here the students who enjoy acting out plays likely think with front brain. I guess so..

Answer:  The front brain(cerebrum) is the part of the brain that controls important cognitive skills in humans, such as emotional expression, problem solving, memory, language, judgment, and sexual behaviors

Explanation:  people who do acting or choir would use the front brain.....  i think :) hope this helps.

Answer:

KOH(aq) + HCI(aq)  ----->  KCI(aq )+ H2O

base          acid               salt          water

hope this helps :)

Explanation:

The formula for the aqueous salt produced when hydroiodic acid is neutralized by potassium hydroxide is KI. The neutralization reaction between hydroiodic acid and potassium hydroxide is given below.

HI(aq) + KOH(aq) → KI(aq) + H2O(l)

The reaction between acid and base to form salt and water is called neutralization reaction.

To learn more about neutralization reaction here.

https://brainly.com/question/13841223

#SPJ3

Answer:

Not to sure! I think energy from the pan is transferred to the food? Maybe.

Explanation:

Answer:

The concentration of chloride ion is [tex]2.82\times10^{-3}\;mol/L[/tex]

Explanation:

We know that 1 ppm is equal to 1 mg/L.

So, the [tex]Cl^-[/tex] content 100 ppm suggests the presence of 100 mg of [tex]Cl^-[/tex] in 1 L of solution.

The molar mass of [tex]Cl^-[/tex] is equal to the molar mass of Cl atom as the mass of the excess electron in [tex]Cl^-[/tex] is negligible as compared to the mass of Cl atom.

So, the molar mass of [tex]Cl^-[/tex] is 35.453 g/mol.

Number of moles = (Mass)/(Molar mass)

Hence, the number of moles (N) of [tex]Cl^-[/tex] present in 100 mg (0.100 g) of [tex]Cl^-[/tex] is calculated as shown below:

[tex]N=\frac{0.100\;g}{35.453\;g/mol}=2.82\times 10^{-3}\;mol[/tex]

So, there is [tex]2.82\times10^{-3}\;mol[/tex] of [tex]Cl^-[/tex] present in 1 L of solution.

Answer:

CO = 1.320 x 10¹¹ Kg  

NOx = 1.942 x 10¹⁰ Kg

HC = 1.592 x 10¹⁰ Kg  

Explanation:

Given that;

there are approximately 250 million passenger vehicles

each is driven 25,000 km per year which is 15534.28 miles per year

In 1970, the  vehicular emission norms are;

CO = 34 g/mile , NOx = 5 g/mile , HC = 4.1 g/mile

so emission of CO in 1970 is;

250000000 × 15534.28 × 34 g

= 1.320 x 10¹⁴ g

= 1.320 x 10¹¹ Kg  

Also, emission of NOx in 1970

250000000 × 15534.28 × 5 g

= 1.9417 x 10¹³ g

= 1.942 x 10¹⁰ Kg

emission of HC in 1970

= 250000000 × 15534.28 × 4.1 g  

= 1.5922 x 10¹³ g

= 1.592 x 10¹⁰ Kg  

Answer:

strong base

Explanation:

aaaaaaaaaaaaa

Answer:

its b

Explanation:

its b sorry if im wrong but mine said b

Answer:

B.

Explanation: I got it right on edg

Answer:

There are 6 Carbon dioxides, and 6 waters, but there are 6 carbons, 18 oxygens, and 12 hydrogens.

Explanation:

Answer:

6 carbon atoms

18 oxygen atoms

12 hydrogen atoms

Explanation:

Preciptation and air pressure

Answer:

It is Temperature and humidity. C

Explanation:

I took the test and it said it was C

Answer:

a) nucleophilic

b) Acid-base

c) Acid- base

d) nucleophilic

e) Acid-base

Explanation:

A nucleophilic reaction is one in which a nucleophile attacks a substrate and a leaving group departs from the substrate.

Reactions (a) and (d) are nucleophilic reactions since the Br- is the leaving group in the both reactions.

Reactions (b) (c) and (e) are acid-base reactions since they involve salt and water as products.

Answer:

Explanation:

The mass of the object can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

where

f is the force

a is the acceleration

From the question we have

[tex]m = \frac{6}{12} = \frac{1}{2} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

The mass of object is 0.5 Kg.

Explanation:

Given data:

Acceleration of object = 12.0 m/s²

Force on object = 6.0 N

Mass of object = ?

Solution:

Formula:

F = m×a

F = force

m = mass

a = acceleration

Now we will put the values in formula.

6.0 N = m  × 12.0 m/s²

m =  6.0 N / 12.0 m/s²  

  ( N = kg.m/s²)

m = 0.5 kg

The mass of object is 0.5 Kg.

Answer:

17.9

Explanation:

to find mass you multiply density and volume. so mass=(51)(0.351) which is 17.901

Answer:

Both ionic bonds and covalent bonds (coordinate and non-coordinate) are present in crystalline [tex]\rm CuSO_4\cdot 5\, H_2O[/tex].

Explanation:

[tex]\rm CuSO_4\cdot 5\, H_2O[/tex] can be formed by adding water to the anhydrous salt [tex]\rm CuSO_4[/tex].

[tex]\rm CuSO_4[/tex] itself is an ionic compound consisting of [tex]\rm Cu^{2+}[/tex] ions and [tex]\rm {SO_4}^{2-}[/tex] ions. Ionic bonds are present between these ions. However, within each sulfate [tex]\rm {SO_4}^{2-}[/tex] ion, covalent bonds connect the central sulfur atom to each of the oxygen atoms.

Water molecules [tex]\rm H_2O[/tex] are highly polar. Partial negative charges surround the oxygen atom in each water molecule.

When water is added to anhydrous [tex]\rm CuSO_4[/tex], the negatively-charged portion of these [tex]\rm H_2O\![/tex] molecules would be attracted to the positively-charged [tex]\rm Cu^{2+}[/tex] ions in [tex]\rm CuSO_4\![/tex].

Lone pairs on oxygen atoms in [tex]\rm H_2O\!\![/tex] would form coordinate covalent bonds with [tex]\rm Cu^{2+}\![/tex] ions. (These bonds are considered "coordinate" because both electrons in each of these bonds come from the oxygen atom, not the [tex]\rm Cu^{2+}[/tex] ion.) That would produce coordination complexes with one [tex]\rm Cu^{2+}\!\![/tex] ion and five [tex]\rm H_2O\!\!\![/tex] "ligands" each.

Because the [tex]\rm H_2O[/tex] ligands carry no electric charge, each of these complexes would also carry a charge of [tex](+2)[/tex] (same as the charge on one [tex]\rm Cu^{2+}\!\![/tex] ion.) Ionic bonds would be present between the positively-charged coordination complexes and the negatively-charged [tex]\rm {SO_4}^{2-}[/tex] ions.

Summary:

Answer:

mole fraction of C6H6 = 0.613 atm

Explanation:

The equation for this reaction is :

          [tex]C_6H_6 _{(g)} + 3H_2_{(g)} \to C_6H_{12}_{(g)}[/tex]

Initial      P₁            P₂             0

Final        0           P₂ -P₁/2      P₁

After completion of the reaction;

P₁  +  P₂  = 1.21 atm                    ----- (1)

P₂  -  P₁/2 +  P₁ = 0.839 atm

P₂ + P₁/2 = 0.839 atm          ----- (2)

Subtracting (2) from (1); we have:

P₁/2 = 0.371

P₁ = 0.742 atm

From(1)

P₁  +  P₂  = 1.21 atm

0.742 atm + P₂  = 1.21 atm

P₂  = 1.21 atm - 0.742 atm

P₂  = 0.468 atm

Thus, the partial pressure of C6H6 = 0.742 atm

∴

Partial pressure = Total pressure × mole fraction of C6H6

mole fraction of C6H6 = Partial pressure /  Total pressure

mole fraction of C6H6 = 0.742 atm / 1.21 atm

mole fraction of C6H6 = 0.613 atm

highest ionization energy

sodium Na

Answer:

Argon would be the correct choice.

Explanation:

Silicon has a total of 14 protons. If 4 protons would be added, you would now have argon, the 18th element.

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question

mass = 4.62 g

density = 13.5 g/cm³

We have

[tex]volume = \frac{4.62}{13.5} \\ = 0.3422222...[/tex]

We have the final answer as

Hope this helps you

Answer:

Sorry I do not know the answer but I do know its not c (pressure)

Explanation:

I took a quiz with that question and I got it wrong my other guess is air density though

Answer:

Wind Speeds

Explanation:

im awnsering late cuz i need pointsss

Answer:

h20

Explanation:

Answer:

Yes, but it must be kept at that value and do not let it to decrease more.

Explanation:

Hello.

In this case, in order to substantiate whether the cabin meet the federal standards, we need to convert the 500 mmHg to atm and compare the result with 0.72 atm by knowing that 1 atm equals 760 mmHg:

[tex]500mmHg*\frac{1atm}{760mmHg} \\\\=0.66atm[/tex]

Thus, since 0.66 atm is 0.06 atm away from the federal standard we can infer that it may meet the federal standard, however, it would not be recommended to let the pressure decrease more than that.

Yes, the cabin pressurized at 500 mm hg meets federal standards.

1 atm is approximately equal to 760 mm Hg. Therefore, the pressure is:

500 mm Hg / 760 mm Hg/atm ≈ 0.65789 atm

So, the cabin pressure of 500 mm Hg is approximately 0.65789 atmospheres. If the atmospheric pressure at an elevation of 8000 feet averages about 0.72 atmospheres, then the cabin pressure of 0.65789 atmospheres would be lower than the ambient atmospheric pressure.

To meet federal standards, cabin pressure should be maintained at an equivalent pressure that allows occupants to breathe comfortably.

Learn more about pressure, here:

https://brainly.com/question/15189000

#SPJ6

Answer:

2KCIO3=2KCI+3O2

Explanation:

1. equalize right side O with left side O- Right side we have 3 and left only 2 so we add 3 in front(on left side)(3*2=6 O on both sides)

2.we add 2 on right side so now we have 6 O on left and 6 O on right and 2KCI

3.Add 2 on right side KCI so on both sides we got 2 KCI

Answer:

Thermal equilibrium stops the transfer of energy in just one direction when both objects reach the same temperature, but allows their particles to continue transferring that energy back and forth.

Explanation:

a. The transfer of energy occurs until both objects reach thermal equilibrium. But particles are always moving and crashing with each other. TRUE.

b. The heat transfer occurs from the hotter object to the colder one but moving of particles descreases with temperature decreasing. FALSE.

c. Plastic and wood have a poor quality to transfer energy but there is no material that "stops" perfectly the transfer of energy. FALSE.

d. The heat is transferred from the particles of the hotter object to the particles of the colder one. FALSE

Answer:

B

Explanation: