Answers
According to the balanced chemical equation provided: 2 KI(aq) + Pb(NO₃)₂(aq) → 2 KNO₃(aq) + PbI₂(s). Therefore, 0.0125 moles of lead (II) iodide (PbI₂) will form during the reaction.
Here is the chemical equation:
2 KI(aq) + Pb(NO₃)₂(aq) → 2 KNO₃(aq) + PbI₂(s)
The stoichiometric ratio between KI and PbI2 is 2:1. This means that for every 2 moles of KI reacted, 1 mole of PbI₂is formed.
In the previous step, you determined that 0.025 mol of KI reacted. Since the stoichiometric ratio is 2:1, the number of moles of PbI₂ formed will be half of the moles of KI reacted.
0.025 mol KI x (1 mol PbI2 / 2 mol KI) = 0.0125 mol PbI₂
Therefore, 0.0125 moles of lead (II) iodide (PbI₂) will form during the reaction.
Learn more about the reaction here.
https://brainly.com/question/22817140
#SPJ1
Related Questions
Determine if the following descriptions apply to the sulfur cycle or to the phosphorus cycle and sort them accordingly. Items (6 items) (Drag and drop into the appropriate area below) a. Includes both oxidized and reduced forms of the element b. Involves an Provides a element that is nutrient that is present in nucleic limiting in most acids, membrane ecosystems lipids, and on some proteins c. Provides a nutrient that is not limited in most ecosystems d. Involves an element that is present in proteins and cofactors e. Includes the oxidized form of the element almost exclusively
Answers
The descriptions that apply to the sulfur cycle are a. Includes both oxidized and reduced forms of the element, c. Provides a nutrient that is not limited in most ecosystems, and d. Involves an element that is present in proteins and cofactors. The descriptions that apply to the phosphorus cycle are b. Involves an Provides a element that is nutrient that is present in nucleic limiting in most acids, membrane ecosystems lipids, and on some proteins and e. Includes the oxidized form of the element almost exclusively.
The sulfur cycle and phosphorus cycle are both biogeochemical cycles that involve the movement of elements through the environment, organisms, and back to the environment.
a. The sulfur cycle includes both oxidized (e.g., sulfate) and reduced forms (e.g., sulfide) of the element. These different forms of sulfur are exchanged between the atmosphere, hydrosphere, and living organisms.
b. The phosphorus cycle involves an element that is present in nucleic acids, membrane lipids, and some proteins. This nutrient is often limiting in most ecosystems, as it is a crucial component for the growth and maintenance of living organisms.
c. The sulfur cycle provides a nutrient that is not limited in most ecosystems. Sulfur is relatively abundant in the environment, making it less likely to be a limiting factor for the growth of organisms.
d. The sulfur cycle also involves an element that is present in proteins and cofactors, such as in the amino acids cysteine and methionine, and in iron-sulfur clusters.
e. The phosphorus cycle includes the oxidized form of the element almost exclusively, as phosphate (PO4^3-). This form is the primary component in many biological molecules and can be readily utilized by living organisms.
In summary, the sulfur cycle (a, c, d) includes both oxidized and reduced forms of the element, provides a nutrient not limited in most ecosystems, and involves an element present in proteins and cofactors. The phosphorus cycle (b, e) involves an element that is present in nucleic acids, membrane lipids, and some proteins, and is often limiting in ecosystems; it includes the oxidized form of the element almost exclusively.
Learn more about sulfur cycle here: https://brainly.com/question/28477168
#SPJ11
c) is there any evidence for exo- vs. endo- in the nmr? explain why/why not.
Answers
There is evidence for exo- vs. endo- in the NMR, as the chemical shift of a proton is affected by the position of substituents on a cyclohexane ring.
Exo- and endo- refer to the position of substituents on a cyclohexane ring. Exo- means that the substituent is on the outside of the ring, while endo- means that the substituent is on the inside of the ring. In NMR spectroscopy, the chemical shift is a measure of the magnetic environment around a particular nucleus.
When a substituent is in the exo- position, it is farther away from the other atoms in the ring. This means that it experiences a slightly different magnetic environment compared to an endo- substituent, which is closer to the other atoms in the ring. As a result, the chemical shift of an exo- substituent will be slightly different from that of an endo- substituent.
This difference in chemical shift can be used to identify the position of substituents on a cyclohexane ring. By comparing the chemical shifts of different protons in the NMR spectrum, it is possible to determine whether a substituent is in the exo- or endo- position.
To learn more about NMR spectroscopy visit:
brainly.com/question/31594990
#SPJ11
2.what are your experimental values for δh°, δs°, and δg° for these reactions? are they in agreement with the theoretical values? discuss any sources of experimental error.
Answers
By following all steps, you can analyze your experimental data values for δh°, δs°, and δg° and discuss any potential sources of error in your results.
The experimental values for ΔH°, ΔS°, and ΔG° for the reactions you are working on. Since you didn't provide the specific reactions, I cannot provide you with the actual values. However, I can guide you through the steps to obtain those values and compare them with theoretical values.
1. Determine the experimental values for ΔH°, ΔS°, and ΔG°:
a. Measure the heat change (q) during the reaction using a calorimeter.
b. Calculate the change in enthalpy (ΔH°) by dividing the heat change (q) by the moles of the limiting reactant.
c. Determine the change in entropy (ΔS°) by analyzing the reaction's products and reactants in terms of their order and molecular complexity.
d. Calculate the change in Gibbs free energy (ΔG°) using the formula ΔG° = ΔH° - TΔS°, where T is the temperature in Kelvin.
2. Compare the experimental values with theoretical values:
a. Look up the standard enthalpies (ΔH°), entropies (ΔS°), and Gibbs free energies (ΔG°) for the reactions in literature or reference materials.
b. Compare your experimental values with the theoretical values to determine if they are in agreement.
3. Discuss any sources of experimental error:
a. Identify any possible sources of error in your experimental setup or procedure, such as measurement inaccuracies, heat loss, or impurities in the reactants.
b. Discuss how these errors could have impacted your experimental values and whether they could account for any discrepancies between your experimental and theoretical values.
By following these steps, you can analyze your experimental data and discuss any potential sources of error in your results.
For more such questions on experimental data , Visit:
https://brainly.com/question/1403648
#SPJ11
9. In a chemical reaction, the percentage yield was 90.0% and the theoretical yield was 1.0g. What was the actual yield of the reaction?
10. The percentage yield for the reaction below is 83.2%. What mass of PCls is expected from the reaction of 73.7 g PC13 with excess chlorine?
PC13 + Cl2 → PCls
Answers
9.The actual yield of the reaction was 0.900 g.
10. The mass of PCls expected from the reaction is 79.6 g
Percentage yield is the ratio of the actual yield to the theoretical yield, expressed as a percentage. In this case, the percentage yield is given as 90.0%, and the theoretical yield is given as 1.0 g. Therefore, we can calculate the actual yield by multiplying the theoretical yield by the percentage yield a
s a decimal:
Actual yield = 1.0 g x 0.900 = 0.900 g.
10. The mass of PCls expected from the reaction is 79.6 g.
To calculate the mass of PCls expected from the reaction, we need to first determine the theoretical yield of PCls using stoichiometry. The balanced chemical equation for the reaction is:
PC13 + Cl2 → PCls
From this equation, we can see that one mole of PC13 reacts with one mole of Cl2 to produce one mole of PCls. Therefore, the number of moles of PCls produced is equal to the number of moles of the limiting reactant (in this case, PC13). To determine the number of moles of PC13, we can divide the given mass by the molar mass:
moles of PC13 = 73.7 g / (30.97 g/mol) = 2.38 mol
Since the molar ratio of PC13 to PCls is 1:1, we know that the theoretical yield of PCls is also 2.38 mol. To convert this to grams, we can multiply by the molar mass:
theoretical yield of PCls = 2.38 mol x (139.33 g/mol) = 331 g
Finally, we can use the percentage yield to calculate the actual yield:
actual yield = theoretical yield x percentage yield/100
actual yield = 331 g x 83.2/100 = 276 g
Therefore, the mass of PCls expected from the reaction is 79.6 g.
To learn more about Percentage yield here:
https://brainly.com/question/1379589
#SPJ1
If the temperature of a liquid drops from 27°C to 3°C, what happened to
the molecules? *
A: the molecules for farther apart
B: The molecules started moving slower
C: the fuel gained cold molecules
D: the molecules became smaller in size
Answers
When the temperature of a liquid drops from 27°C to 3°C, the molecules of the liquid started moving slower and came closer together. Therefore, the correct option is B. The molecules started moving slower.
What is temperature?
Temperature is a measure of the average kinetic energy of the particles in a system. The faster the particles move, the higher the temperature. The slower the particles move, the lower the temperature.
What happens when the temperature decreases?
If the temperature of a substance decreases, the kinetic energy of its molecules also decreases. This causes the particles to move more slowly and come closer together. This leads to a decrease in the volume of the substance.
To learn more about molecules, refer:-
https://brainly.com/question/32298217
#SPJ11
which one of the following compounds is insoluble in water? a. pbso4 b. nano3 c. rb2co3 d. k2so4
Answers
Compound a. PbSO₄ is insoluble in water. When a compound is insoluble in water, it means that it cannot dissolve in water.
In the case of PbSO₄, it has a low solubility in water and can only dissolve to a very small extent. On the other hand, compounds b, c, and d are soluble in water.
When a compound is insoluble in water, it means that it has a very low solubility and cannot dissolve in water. The solubility of a compound depends on the nature of the compound, its structure, and the nature of the solvent. In the case of PbSO₄, it has a low solubility in water and can only dissolve to a very small extent.
On the other hand, compounds b, c, and d are soluble in water. Compound b, NaNO₃, is a salt and can dissolve in water to form Na⁺ and NO³⁻ ions. Similarly, compound c, Rb₂CO₃, is a salt that can dissolve in water to form Rb+ and CO₃²⁻ ions. Compound d, K₂SO₄, is also a salt that can dissolve in water to form K⁺ and SO₄²⁻ ions.
In conclusion, compound a, PbSO₄, is insoluble in water, while compounds b, c, and d are soluble in water.
To know more about solubility, visit:
https://brainly.com/question/28170449
#SPJ11
Make a list of the four quantum numbers n, l, ml, and s for each of the 12 electrons in the ground state of the magnesium atom. Check all that apply.A. n = 1, l = 0, ml = 0, s = ±1/2B. n = 3, l = 2, ml = 0, s = ±1/2C. n = 2, l = 1, ml = 0, s ±1/2D. n = 1, l = 0, ml = 1, s = ±1/2E. n = 3, l = 1, ml = 1, s = ±1/2F. n = 2, l = 1, ml = -1, s = ±1/2G. n = 2, l= 1, ml = 1, s = ±1/2
Answers
The ground state electron configuration of magnesium is 1s²2s²2p⁶. Therefore, the four quantum numbers for each of the 12 electrons in the ground state of the magnesium atom can be determined as follows:
First electron:
n = 1, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Second electron:
n = 1, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Third electron:
n = 2, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Fourth electron:
n = 2, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Fifth electron:
n = 2, l = 1, ml = -1, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Sixth electron:
n = 2, l = 1, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Seventh electron:
n = 2, l = 1, ml = 1, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Eighth electron:
n = 2, l = 1, ml = -1, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Ninth electron:
n = 2, l = 1, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Tenth electron:
n = 2, l = 1, ml = 1, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Eleventh electron:
n = 3, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Twelfth electron:
n = 3, l = 0, ml = 0, s = +1/2 or -1/2 (2 possibilities due to electron spin)
Therefore, the correct options are:
A. n = 1, l = 0, ml = 0, s = ±1/2 (first and second electrons)
C. n = 2, l = 1, ml = 0, s = ±1/2 (sixth and ninth electrons)
E. n = 3, l = 1, ml = 1, s = ±1/2 (fifth electron)
F. n = 2, l = 1, ml = -1, s = ±1/2 (eighth electron)
G. n = 2, l = 1, ml = 1, s = ±1/2 (tenth electron)
To know more about electron configuration refer here
https://brainly.com/question/31812229#
#SPJ11
what is the ph of a buffer prepared with 0.30 m h2s and 0.15 m hs− , if the ka of hydrosulfuric acid is 9.1 × 10-8? h2s(aq) h2o(l) ⇋ h3o (aq) hs−(aq)
Answers
Now, we can plug in the values for [A-] and [HA] into the Henderson-Hasselbalch equation: pH = 3.82 + log(0.15/0.30) pH = 3.52 (long answer)
To find the pH of a buffer prepared with 0.30 M H2S and 0.15 M HS−, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pKa is the acid dissociation constant, [A-] is the concentration of the conjugate base (HS−), and [HA] is the concentration of the acid (H2S).
First, we need to find the pKa of hydrosulfuric acid (H2S) using the given Ka value:
Ka = [H3O+][HS−]/[H2S]
9.1 × 10-8 = x^2/0.30
x = [H3O+] = [HS−] = 1.51 × 10-4 M
pH = -log[H3O+] = 3.82
To know more about pH visit:-
https://brainly.com/question/491373
#SPJ11
The Sun's energy production is due to the fusion of 1H into 4He . How does the mass of four 1h nuclei (4mh) compare with the mass of one ""He nucleus (mhe)? A. 4mH = mHe B. 4mH mHe D. It cannot be determined without knowing the amount of energy released.
Answers
The mass of four [tex]^1H[/tex] nuclei ([tex]^4mH[/tex]) is equal to the mass of one [tex]^4He[/tex] nucleus (mHe), making the equation [tex]^4mH[/tex] = mHe (option a). The amount of energy released does not affect this relationship .
- The fusion of [tex]^1H[/tex] (hydrogen) into [tex]^4He[/tex] (helium) is a process that occurs in the core of the Sun, where temperatures and pressures are extremely high.
- During this process, four hydrogen nuclei ([tex]^1H[/tex]) combine to form one helium nucleus ([tex]^4He[/tex]).
- The mass of a single hydrogen nucleus is approximately 1 atomic mass unit (amu), while the mass of a helium nucleus is approximately 4 amu.
- Therefore, the mass of four hydrogen nuclei ([tex]^4mH[/tex]) is equal to 4 amu, while the mass of one helium nucleus (mHe) is equal to 4 amu.
- Combining these values, we get: [tex]^4mH[/tex] = mHe.
- This relationship between mass and nuclear reactions is described by Einstein's famous equation, E= [tex]mc^2[/tex], which shows that mass and energy are interchangeable.
- However, the amount of energy released by the fusion reaction does not affect the mass of the nuclei involved in the reaction, so the answer is not dependent on the amount of energy released.
For more such questions on nucleus, click on:
https://brainly.com/question/3992688
#SPJ11
The probable question may be:
The Sun's energy production is due to the fusion of [tex]^1H[/tex] into [tex]^4He[/tex]. How does the mass of four [tex]^1H[/tex] nuclei (4mH) compare with the mass of one [tex]^4He[/tex] nucleus (MHe)?
A. [tex]^4mH[/tex] =MHe
B. [tex]^4mH[/tex] <MHe
C. [tex]^4mH[/tex] > mHe
D. It cannot be determined without knowing the amount of energy released.
The Sun's energy production is due to the fusion of 1H into 4He, the mass of four 1h nuclei (4mh) compare with the mass of one He nucleus, the correct answer is B, 4mH > mHe.
During the fusion of four hydrogen nuclei into a helium nucleus, some of the mass is converted into energy in accordance with Einstein's famous equation E=mc².
This means that the mass of the four hydrogen nuclei (4mH) is slightly greater than the mass of one helium nucleus (mHe). The difference in mass is converted into energy according to the equation E = Δmc², where Δm is the difference in mass and c is the speed of light.
The amount of energy released by the fusion of four hydrogen nuclei into a helium nucleus is enormous and powers the Sun's energy production.
This fusion reaction occurs in the Sun's core at temperatures of about 15 million degrees Celsius and pressures about 250 billion times atmospheric pressure.
Learn more about helium here :
https://brainly.com/question/5596460
#SPJ11
A neutralization reaction between an acid and a metal hydroxide produces View Avallable Hint(s) hydrogen gas. water and a salt Ooxygen gas. sodium hydroxide.
Answers
Neutralization reaction between an acid and a metal hydroxide produces water and a salt. This is because the acid and metal hydroxide react to form a salt and water through the transfer of hydrogen ions.
In a neutralization reaction, the acid donates a hydrogen ion (H+) to the hydroxide ion (OH-) from the metal hydroxide. This forms water (H2O) and a salt (an ionic compound made up of a positive ion from the metal and a negative ion from the acid). For example, the neutralization of hydrochloric acid (HCl) with sodium hydroxide (NaOH) produces water and sodium chloride (NaCl), which is a salt.
Examples of other acid-base reactions are neutralization of a strong acid with a weak base or the neutralization of a weak acid with a strong base. Additionally, the practical applications of neutralization reactions are in industries such as agriculture and medicine.
To learn more about neutralization reaction visit:
brainly.com/question/28970253
#SPJ11
determine the value of kp at 25 °c for the reaction i2(g) cl2(g) ⇌2 icl(g) given that the standard free energies of formation for i2(g) and icl(g) are 62.42 kj/mol and 25.75 kj/mol, respectively.
Answers
The value of Kp at 25 °C for the reaction I2(g) + Cl2(g) ⇌ 2 ICl(g) is 1305.57.
The equilibrium constant Kp at 25 °C can be determined using the standard free energy change (∆G°) of the reaction and the following equation:
∆G° = -RT ln Kp
where R is the gas constant (8.314 J/K·mol), T is the temperature in Kelvin (25 + 273.15 = 298.15 K), and ln is the natural logarithm.
The reaction can be written as:
I2(g) + Cl2(g) ⇌ 2 ICl(g)
The standard free energy change (∆G°) for the reaction can be calculated as follows:
∆G° = ∑∆G°f(products) - ∑∆G°f(reactants)
∆G° = 2∆G°f(ICl(g)) - ∆G°f(I2(g)) - ∆G°f(Cl2(g))
∆G° = 2(-25.75 kJ/mol) - 62.42 kJ/mol + 0 kJ/mol
∆G° = -51.92 kJ/mol
Substituting the values into the equation for ∆G° and solving for Kp, we get:
-51.92 kJ/mol = -8.314 J/K·mol × 298.15 K × ln Kp
ln Kp = -51.92 kJ/mol ÷ (-8.314 J/K·mol × 298.15 K)
ln Kp = 7.18
Kp = e^(7.18) = 1305.57
For more such questions on Kp
https://brainly.com/question/22074421
#SPJ11
The value of Kp at 25°C for the reaction [tex]I_{2}[/tex](g) + [tex]Cl_{2}[/tex](g) ⇌ 2ICl(g) is approximately 1718. The value of Kp can be determined using the equation ΔG° = -RTlnK.
The value of Kp at 25°C for the reaction [tex]I_{2}[/tex](g) + [tex]Cl_{2}[/tex](g) ⇌ 2ICl(g) can be determined using the equation ΔG° = -RTlnK, where ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant.
First, we need to calculate the standard free energy change for the reaction using the free energies of formation for [tex]I_{2}[/tex]2(g) and ICl(g) provided. The equation for the standard free energy change is:
ΔG° = ΣnΔGf°(products) - ΣmΔGf°(reactants)
where ΔGf° is the standard free energy of formation, and n and m are the stoichiometric coefficients of the products and reactants, respectively. Plugging in the values, we get:
ΔG° = (2 x ΔGf°(ICl(g))) - (ΔGf°(I2(g)) + ΔGf°([tex]Cl_{2}[/tex](g)))
ΔG° = (2 x -25.75 kJ/mol) - (62.42 kJ/mol + 0 kJ/mol)
ΔG° = -51.5 kJ/mol
Next, we can use the equation ΔG° = -RTlnK to solve for Kp at 25°C. The gas constant R is 8.314 J/(mol·K), and 25°C is 298 K. Converting kJ to J, we get:
-51,500 J/mol = -(8.314 J/(mol·K) x 298 K) x lnKp
lnKp = 5.13
Kp = [tex]e^(5.13)[/tex]
Kp ≈ 1718
Therefore, the value of Kp at 25°C for the reaction [tex]I_{2}[/tex](g) +[tex]Cl_{2}[/tex](g) ⇌ 2ICl(g) is approximately 1718.
Learn more about stoichiometric coefficients here :
https://brainly.com/question/28213872
#SPJ11
Select the structure that corresponds
to the name:
A.
OH
OH
1,2,3-pentanetriol
B.
OH
HOCH(OH)CH(OH)CH2 CH₂ CH3
C. both
Enter
Answers
The structure that corresponds to the name 1,2,3-pentanetriol is structure A. Hence, option A is correct.
Structure A shows a molecule with three hydroxyl (-OH) functional groups attached to a pentane chain. The prefix "pent-" indicates that the chain has five carbon atoms, while the suffix "-triol" indicates that there are three hydroxyl groups present in the molecule.
In the name "1,2,3-pentanetriol", the numbers indicate the positions of the hydroxyl groups on the pentane chain. The hydroxyl groups are located on the first, second, and third carbon atoms, respectively.
The structure in option A matches this description, with three hydroxyl groups located on the first, second, and third carbon atoms of the pentane chain.
To learn more about the structural formula, follow the link:
https://brainly.com/question/2120948
#SPJ1
true or false [2 pts]: chemical molecules can undergo evolution.
Answers
The statement ' chemical molecules can undergo evolution' is false because chemical molecules do not have the ability of evolution.
Chemical molecules themselves do not undergo evolution. Evolution is a process that occurs in living organisms, specifically through the mechanisms of genetic variation, natural selection, and reproduction. Evolution involves changes in the genetic makeup of populations over successive generations.
Chemical molecules, on the other hand, do not possess the ability to reproduce, inherit traits, or undergo genetic variation. While chemical reactions can lead to the formation or transformation of molecules, these processes are governed by the fundamental principles of chemistry, not by the mechanisms of evolution.
Evolution operates at the level of populations and species, where genetic information is passed down and modified over time through reproduction and genetic mutations.
Chemical molecules, while important in biological processes and the building blocks of life, do not possess the characteristics necessary for evolutionary processes to occur.
To learn more about evolution, click here:
https://brainly.com/question/13492988
#SPJ11
a buffer that contains 0.18 m of a base, b and 0.41 m of its conjugate acid bh , has a ph of 8.58. what is the ph after 0.019 mol of ba(oh)2 are added to 0.75 l of the solution?
Answers
After adding 0.019 mol of Ba(OH)₂ to 0.75 L of the solution, the pH of the solution is approximately 12.70. To determine the pH of the solution after adding Ba(OH)₂, we need to consider the reaction between Ba(OH)₂ and the conjugate acid (BH) in the buffer solution.
The balanced equation for the reaction is:
BH + Ba(OH)₂ → B + Ba²⁺ + 2OH⁻
To calculate the final concentration of BH and B, we need to determine the new moles of BH and B after the reaction.
Moles of BH remaining = nBH - nBa(OH)₂ = 0.135 mol - 0.019 mol = 0.116 mol
Moles of B formed = nBa(OH)₂ = 0.019 mol
Now we can calculate the final concentrations of BH and B in the solution:
Final concentration of BH = Moles of BH remaining / V = 0.116 mol / 0.75 L = 0.155 M
Final concentration of B = Moles of B formed / V = 0.019 mol / 0.75 L = 0.025 M
Next, we can calculate the pOH of the solution using the concentration of hydroxide ions (OH⁻):
pOH = -log[OH⁻]
pOH = -log(2 * Final concentration of B)
pOH = -log(2 * 0.025) ≈ -log(0.05) ≈ 1.30
Since pH + pOH = 14, we can calculate the pH:
pH = 14 - pOH
pH = 14 - 1.30
pH ≈ 12.70
Learn more about the buffer: https://brainly.com/question/31605089
#SPJ11
What is the major product of the following reaction? excess HBrA) BrCH2CH2CH2CH2CH-CH2 B) CH,CHCH,CH CH CH C) Br D) BrCH2CH2CH2CH2CH2CH2Br E) CH,CHCHACH.CH.CH.Br Br
Answers
The major product of the given reaction is option D, BrCH2CH2CH2CH2CH2CH2Br. And adding HBr would result in a mixture of products due to the presence of two possible carbon atoms .
The given reaction involves the addition of excess HBr to a compound containing a double bond. This type of reaction is known as an electrophilic addition reaction, where the electrophile (H+) is added to the double bond and the nucleophile (Br-) is added to the carbon atom that originally had the double bond. In option A, the double bond is located between the fourth and fifth carbon atoms, Therefore, option A is not the major product.
The given reaction involves excess HBr, which indicates that it's an addition reaction of HBr across the alkene bonds. In this case, we have two alkene bonds present in the starting compound. HBr will add to both alkenes, following Markovnikov's rule.
Step-by-step explanation:
1. Identify the starting compound, which has two alkene bonds: CH3CH=CHCH2CH=CH2.
2. Add the first HBr molecule across the first alkene bond: CH3CHBrCHCH2CH=CH2.
3. Add the second HBr molecule across the second alkene bond: CH3CH2CHBrCH2CH2CHBr.
4. The major product is CH3CH2CHBrCH2CH2CHBr, which corresponds to option (E).
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ11
How much zinc can be collected from a 25g sample of ZnO?
Answers
To determine the amount of zinc that can be collected from a 25g sample of ZnO, you need to calculate the theoretical yield of zinc. This can be done by using the stoichiometry of the balanced chemical equation and the molar masses of ZnO and Zn.
The balanced chemical equation for the reaction between ZnO and an appropriate reducing agent, such as carbon, can be represented as follows:
ZnO + C → Zn + CO
From the equation, we can see that the stoichiometric ratio between ZnO and Zn is 1:1. This means that for every 1 mole of ZnO reacted, 1 mole of Zn is produced.
To calculate the theoretical yield of zinc, we need to convert the mass of ZnO to moles using its molar mass, and then use the stoichiometric ratio to find the corresponding moles of Zn. Finally, we can convert the moles of Zn to grams using the molar mass of Zn.
The molar mass of ZnO is the sum of the atomic masses of zinc (Zn) and oxygen (O), which is approximately 81.38 g/mol. Using the molar mass of Zn (65.38 g/mol), we can now perform the calculation:
Theoretical yield of Zn = (25 g ZnO) × (1 mol ZnO/81.38 g ZnO) × (1 mol Zn/1 mol ZnO) × (65.38 g Zn/1 mol Zn)
Simplifying the calculation, the theoretical yield of Zn from a 25g sample of ZnO is obtained.
Learn more about stoichiometry here: https://brainly.com/question/14935523
#SPJ11
Isocitrate dehydrogenase is found only in mitochondria, but malate dehydrogenase is found in both cytosol and mitochondria. What is the role of cytosolic malate dehydrogenase?
Answers
The role of cytosolic malate dehydrogenase is to facilitate the transfer of reducing equivalents from the cytosol to the mitochondria, contributing to cellular energy production.
Cytosolic malate dehydrogenase plays a crucial role in the malate-aspartate shuttle. This shuttle facilitates the transfer of reducing equivalents (NADH) from the cytosol to the mitochondria, which is essential for energy production. The process involves the following steps:
1. Cytosolic malate dehydrogenase catalyzes the conversion of cytosolic oxaloacetate to malate, using NADH to produce NAD+.
2. Malate is then transported into the mitochondria, where it is converted back to oxaloacetate by mitochondrial malate dehydrogenase, regenerating NADH in the mitochondria.
3. This NADH is used in the mitochondrial electron transport chain to produce ATP, the primary energy currency of the cell.
In summary, the role of cytosolic malate dehydrogenase is to facilitate the transfer of reducing equivalents from the cytosol to the mitochondria, contributing to cellular energy production.
Learn more about mitochondria at: https://brainly.com/question/15159664
#SPJ11
Use the tabulated half-cell potentials below to calculate ΔG° for the following balanced redox reaction. 3 I2(s) + 2 Fe(s) → 2 Fe3+(aq) + 6 I-(aq)
Answers
The ΔG° for the balanced redox reaction: 3 I₂(s) + 2 Fe(s) → 2 Fe₃⁺(aq) + 6 I⁻(aq) is -177.27 kJ/mol.
To calculate ΔG° for the given reaction, we need to use the formula:
ΔG° = -nFE°
where ΔG° is the standard free energy change, n is the number of electrons transferred in the reaction, F is the Faraday constant (96,485 C/mol), and E° is the standard electrode potential.
First, we need to write the half-reactions for the reaction:
Half-reaction for the reduction of Fe₃⁺ to Fe₂⁺:
Fe₃⁺(aq) + e⁻ → Fe₂⁺(aq) E° = +0.771 V
Half-reaction for the oxidation of I⁻ to I₂:
2 I⁻(aq) → I₂(s) + 2 e⁻ E° = +0.535 V
To obtain the overall balanced redox reaction, we need to multiply the reduction half-reaction by 2 and add it to the oxidation half-reaction:
2 Fe₃⁺(aq) + 2 e⁻ → 2 Fe₂⁺(aq) (multiplied by 2)
+ 2 I⁻(aq) → I₂(s) + 2 e⁻
--------------------------------------
3 I₂(s) + 2 Fe(s) → 2 Fe₃⁺(aq) + 6 I⁻(aq)
Now, we can calculate the standard free energy change ΔG° for the reaction using the formula above:
ΔG° = -nFE°
ΔG° = - (6 mol e⁻) × (96,485 C/mol) × (+0.306 V)
ΔG° = - 177,272 J/mol or -177.27 kJ/mol (rounded to 3 significant figures)
Therefore, the standard free energy change for the given balanced redox reaction is -177.27 kJ/mol.
Learn more about free energy: https://brainly.com/question/31170437
#SPJ11
calculate δg∘rxnδgrxn∘ and e∘cellecell∘ for a redox reaction with nnn = 3 that has an equilibrium constant of kkk = 21 (at 25 ∘c∘c).
Answers
The Gibbs free energy change (ΔG°rxn) is approximately -4360 J/mol, and the standard cell potential (E°cell) is approximately 0.015 V.
Step 1: Write the balanced redox reaction.
In this case, we know that n = 3 and the equilibrium constant is k = 21. We can use this information to write the balanced redox reaction:
3X + 2Y ⇌ 2Z
Step 2: Calculate the standard cell potential, e∘cell.
The standard cell potential, e∘cell, can be calculated using the equation:
e∘cell = (RT/nF)ln(k)
Where R is the gas constant (8.314 J/mol•K), T is the temperature in Kelvin (298 K), F is the Faraday constant (96485 C/mol), n is the number of electrons transferred in the reaction (in this case, n = 3), and k is the equilibrium constant (21).
Plugging in the values:
e∘cell = (8.314 J/mol•K × 298 K)/(3 × 96485 C/mol) × ln(21)
e∘cell = 0.163 V
Step 3: Calculate the standard free energy change, δg∘rxn.
The standard free energy change, δg∘rxn, can be calculated using the equation:
δg∘rxn = -nF(e∘cell)
Plugging in the values:
δg∘rxn = -3 × 96485 C/mol × 0.163 V
δg∘rxn = -47.2 kJ/mol
Therefore, the long answer to this question is:
The balanced redox reaction with n = 3 and k = 21 is 3X + 2Y ⇌ 2Z. The standard cell potential, e∘cell, can be calculated using the equation e∘cell = (RT/nF)ln(k), which gives a value of 0.163 V. The standard free energy change, δg∘rxn, can be calculated using the equation δg∘rxn = -nF(e∘cell), which gives a value of -47.2 kJ/mol.
To calculate the Gibbs free energy change (ΔG°rxn) and the standard cell potential (E°cell) for a redox reaction with n=3 and an equilibrium constant K=21 at 25°C, we can use the following formulas:
ΔG°rxn = -RTlnK
E°cell = -ΔG°rxn / (nF)
where R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25°C + 273.15 = 298.15 K), and F is the Faraday constant (96,485 C/mol).
1. Calculate ΔG°rxn:
ΔG°rxn = - (8.314 J/mol·K) * (298.15 K) * ln(21)
ΔG°rxn ≈ -4360 J/mol
2. Calculate E°cell:
E°cell = - (-4360 J/mol) / (3 * 96,485 C/mol)
E°cell ≈ 0.015 V
To know more about cell visit :-
https://brainly.com/question/4684110
#SPJ11
give the mechanism for the reaction of diazomethane with cyclobutene
Answers
Answer:
The reaction between diazomethane and cyclobutene follows a concerted, cycloaddition mechanism known as the Wolff rearrangement.
Explanation:
In this mechanism, the diazomethane molecule undergoes a homolytic cleavage of the N=N bond to generate a carbene intermediate, which then rapidly undergoes a cycloaddition reaction with the double bond of cyclobutene. The resulting intermediate then undergoes a rearrangement, leading to the formation of a cyclobutanone product. Overall, the reaction proceeds through a concerted, one-step mechanism involving the formation and subsequent rearrangement of a carbene intermediate.
1. Diazomethane (CH2N2) acts as a nucleophile, attacking the double bond in cyclobutene.
2. The double bond in cyclobutene breaks, forming a new single bond with the carbon atom in diazomethane.
3. Simultaneously, one of the nitrogen atoms in diazomethane forms a new double bond with the carbon atom, while the other nitrogen atom leaves as a leaving group (N2 gas).
4. The result is a cyclobutene ring with a new methyl group (from diazomethane) and a new nitrogen atom double bonded to the carbon where the double bond in cyclobutene originally was.
In summary, the mechanism for the reaction of diazomethane with cyclobutene involves diazomethane attacking the double bond in cyclobutene, breaking the double bond, and forming a new methyl group and nitrogen double bond in the cyclobutene ring.
To know more about reaction with diazomethane with cyclobutene, visit:
https://brainly.com/question/15215905
#SPJ11
In the following gas phase reaction, what is the effect on the direction of the reaction if more CO2 is added to the reaction mixture?2CO(g) + O2(g) ⇌ 2CO2(g)A) The position of the equilibrium remains unchanged.B) The equilibrium shifts to produce more products.C) The equilibrium shifts to produce more reactants.D) The rate of formation of products is increased.E) The catalyst for the reaction is used up.
Answers
In the given gas phase reaction, 2CO(g) + O2(g) ⇌ 2CO2(g), if more CO2 is added to the reaction mixture, it will affect the position of the equilibrium and the direction of the reaction.
According to Le Chatelier's principle, when a stress is applied to a system in equilibrium, the system will adjust to relieve that stress and restore equilibrium. In this case, the addition of more CO2 can be considered a stress to the equilibrium system.
To relieve the stress caused by the increase in CO2 concentration, the equilibrium will shift in the direction that consumes the excess CO2. In other words, the equilibrium will shift to produce more reactants (CO and O2) in order to reduce the concentration of CO2.
Therefore, the correct answer is :
C) The equilibrium shifts to produce more reactants.
Learn more about Le Chatelier's principle here : brainly.com/question/29009512
#SPJ11
chelating agents are used to: a. add color to foods b. prevent discoloration c. maintain emulsions d. whiten foods such as cheese e. improve nutritional value
Answers
Chelating agents are used to: add color to foods, prevent discoloration, maintain emulsions, whiten foods such as cheese, improve nutritional value. All of the given options are correct.
Chelating agents are substances that have the ability to form a complex with a metal ion, holding it in a stable and soluble form. This property makes chelating agents useful in a variety of applications, including food processing and preservation.
One of the main uses of chelating agents in the food industry is to prevent discoloration. Metal ions, such as iron and copper, can cause discoloration in foods by catalyzing oxidative reactions. By forming stable complexes with these metal ions, chelating agents can prevent discoloration and maintain the color of the food.
Chelating agents are also used to maintain emulsions. Emulsions are mixtures of immiscible liquids, such as oil and water, which are held together by a stabilizing agent. Metal ions can disrupt the stability of an emulsion by catalyzing the breakdown of the stabilizing agent. Chelating agents can form complexes with metal ions, preventing them from catalyzing the breakdown of the emulsion.
Chelating agents are also used to whiten foods such as cheese. Metal ions can cause discoloration in cheese, and chelating agents can prevent this discoloration by forming complexes with the metal ions.
Finally, chelating agents can improve the nutritional value of foods by increasing the bioavailability of certain minerals. For example, chelating agents can form complexes with iron, making it more readily absorbed by the body.
Overall, chelating agents are an important class of compounds with a variety of uses in the food industry. Their ability to form stable complexes with metal ions makes them useful in preventing discoloration, maintaining emulsions, and improving the nutritional value of foods. Hence, all of the given options are correct.
To know more about chelating agents, refer to the link below:
https://brainly.com/question/31835074#
#SPJ11
Determine the oxidation state for each of the elements below. The oxidation state of iodine in iodic acid HIO; is The oxidation state of nitrogen in nitrosyl fluoride NOF is The oxidation state of fluorine in fluorine gas F2 is
Answers
1. The oxidation state of iodine in iodic acid HIO is +5.
2. The oxidation state of nitrogen in nitrosyl fluoride NOF is +2.
3. The oxidation state of fluorine in fluorine gas [tex]F_2[/tex] is 0.
1. Iodic acid (HIO):
To determine the oxidation state of iodine (I) in iodic acid (HIO), we start by assigning the oxidation state of hydrogen (H) as +1 since it is usually in this state when combined with nonmetals. The oxygen (O) atom in the compound will have an oxidation state of -2 since it is typically assigned this value in compounds.
We can then set up an equation to calculate the oxidation state of iodine (I):
(+1) + (x) + (-2) = 0
Simplifying the equation, we have:
x - 1 = 0
x = +1
Therefore, the oxidation state of iodine in iodic acid (HIO) is +5.
2. Nitrosyl fluoride (NOF):
For nitrosyl fluoride (NOF), we know that fluorine (F) typically has an oxidation state of -1 in compounds.
Let's assume that the oxidation state of nitrogen (N) in nitrosyl fluoride is x. The sum of the oxidation states in a compound should equal the overall charge, which is 0 for NOF.
We can set up the equation as follows:
x + (-1) + (-1) = 0
Simplifying the equation, we have:
x - 2 = 0
x = +2
Therefore, the oxidation state of nitrogen in nitrosyl fluoride (NOF) is +2.
3. Fluorine gas ([tex]F_2[/tex]):
In a molecule of fluorine gas ([tex]F_2[/tex]), both fluorine atoms are identical, and they share the same oxidation state. We can assume the oxidation state of each fluorine atom as x.
The sum of the oxidation states in a neutral molecule is always 0. Therefore, we can set up the equation as follows:
x + x = 0
Simplifying the equation, we have:
2x = 0
x = 0
Thus, the oxidation state of fluorine in fluorine gas ([tex]F_2[/tex]) is 0.
For more such questions on oxidation, click on:
https://brainly.com/question/13182308
#SPJ11
The oxidation state of iodine in iodic acid HIO4 is +5. The oxidation state of nitrogen in nitrosyl fluoride NOF is +1. The oxidation state of fluorine in fluorine gas F2 is 0.
The oxidation state of an element is the charge it would have if all the shared electrons in a compound were assigned to the more electronegative element.
In iodic acid HIO4, the oxidation state of oxygen is -2, and the sum of the oxidation states of all the atoms in the compound must equal the charge on the compound, which is 0.
Therefore, the oxidation state of iodine is +5. In nitrosyl fluoride NOF, the oxidation state of fluorine is -1, and the sum of the oxidation states of all the atoms in the compound must equal the charge on the compound, which is 0.
Therefore, the oxidation state of nitrogen is +1. In fluorine gas F2, the atoms are identical, and they share electrons equally, so the oxidation state of each fluorine atom is 0.
Learn more about oxidation state here :
https://brainly.com/question/17161178
#SPJ11
Consider the reaction that occurs when copper is added to nitric acid. Cu(s) 4HNO3(aq) mc024-1. Jpg Cu(NO3)2(aq) 2NO2(g) 2H2O(l) What is the reducing agent in this reaction? Cu NO3– Cu(NO3)2 NO2.
Answers
In the reaction between copper (Cu) and nitric acid (HNO_{3}), copper acts as the reducing agent.
In a chemical reaction, the reducing agent is the species that donates electrons, leading to a decrease in its oxidation state. In the given reaction, copper (Cu) undergoes oxidation, losing electrons to form Cu^{+2}ions in the product [tex]Cu(NO_{3}) _{2}[/tex].
Cu(s) → [tex]Cu^{+2}[/tex](aq) + 2e-
The oxidation state of copper increases from 0 in the reactant (Cu) to +2 in the product (Cu2+). This indicates that copper loses electrons and gets oxidized. On the other hand, nitric acid (HNO_{3}) is the oxidizing agent in the reaction since it accepts electrons during the reaction. Nitric acid is reduced as nitrogen in HNO_{3} gains electrons and goes from +5 oxidation state to +4 oxidation state in [tex]NO_{2}[/tex]
[tex]HNO_{3}[/tex](aq) + 3e- → NO2(g) + 2[tex]H_{2}O[/tex](l)
Therefore, copper is the reducing agent in this reaction as it undergoes oxidation by losing electrons, while nitric acid acts as the oxidizing agent by accepting those electrons and getting reduced.
Learn more about oxidation here: https://brainly.com/question/31844777
#SPJ11
for a certain acid pka = 5.73. calculate the ph at which an aqueous solution of this acid would be 0.51 issociated. round your answer to 2 decimal places.
Answers
When an aqueous solution of this acid with a pKa of 5.73 is 0.51 dissociated, the pH of the solution is about 5.75.
To calculate the pH at which an aqueous solution of this acid would be 0.51 dissociated, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])
Given the pKa of the acid is 5.73, and the acid is 0.51 dissociated, we can determine the ratio of the dissociated form ([A-]) to the undissociated form ([HA]):
0.51 dissociated means 0.49 (1 - 0.51) of the acid remains undissociated. So, the ratio [A-]/[HA] = 0.51/0.49.
Now, we can plug these values into the Henderson-Hasselbalch equation:
pH = 5.73 + log (0.51/0.49)
Solving for pH, we get:
pH ≈ 5.73 + 0.018 = 5.748
Rounded to two decimal places, the pH is approximately 5.75.
We determined this by using the Henderson-Hasselbalch equation and considering the ratio of dissociated to undissociated acid.
You can learn more about aqueous solutions at: brainly.com/question/2159485
#SPJ11
which of the following would not be included in an equilibrium expression. reactant that is a solid c. product that is a gas reactant that is aqueous d. product that is aqueous
Answers
A reactant that is a solid would not be included in an equilibrium expression. Option B is answer.
In an equilibrium expression, only the concentrations or partial pressures of species in the gaseous or aqueous phases are included. This is because the concentrations or partial pressures of these species can change significantly during a chemical equilibrium, while the concentration of a solid remains constant throughout the reaction.
Solids are considered to have a constant concentration because their particles are tightly packed and do not readily diffuse or mix with the surrounding solution. Therefore, the concentration of a solid reactant does not change and is not included in the equilibrium expression.
Option B is answer.
You can learn more about equilibrium at
https://brainly.com/question/517289
#SPJ11
In the Thermo Fisher application note about wine analysis (Lesson 3), a calibration curve was generated for catechin. Use the equation from the calibration curve to predict analyte concentration in an unknown sample with a peak area of 72050.
Choose one answer:
a. 33.8 μg/mL
b. 100.3 μg/mL
c. 43.7 μg/mL
d. 28.5 μg/mL
Answers
Using the information provided, you would use the calibration curve equation to predict the catechin concentration in the unknown sample with a peak area of 72050.
To predict the analyte concentration in an unknown sample with a peak area of 72050, we need to use the equation from the calibration curve for catechin. However, the calibration curve equation is not provided in the question. Therefore, we cannot provide a direct answer to this question without the calibration curve equation.
However, we can provide a general approach to solving this problem. The calibration curve is typically generated by analyzing standard solutions of known concentrations and plotting the peak area versus the concentration. The equation of the line or curve that best fits the data can then be determined. Once we have the equation, we can use it to predict the concentration of an unknown sample with a given peak area.
To know more about calibration visit:-
https://brainly.com/question/8137688
#SPJ11
predict the species that will be reduced first if the following mixture of molten salts undergoes electrolysis. k , ba2 , cl-, br-, f-
Answers
Chloride ions will likely be reduced first in the molten salt mixture.
During electrolysis, the positively charged ions (cations) are attracted to the negatively charged electrode (cathode) and undergo reduction (gain of electrons), while the negatively charged ions (anions) are attracted to the positively charged electrode (anode) and undergo oxidation (loss of electrons).
In the given mixture of molten salts, the cations are K+ and Ba2+, while the anions are Cl-, Br-, and F-. Chloride ions (Cl-) are the most easily reducible anions among the given choices.
This is because their reduction potential is less negative compared to the other two anions, meaning they require less energy to undergo reduction. Therefore, chloride ions are likely to be reduced first during electrolysis.
For more such questions on Chloride , click on:
https://brainly.com/question/28106660
#SPJ11
Cl- is likely to be reduced first during electrolysis of the mixture of molten salts due to its higher reactivity compared to the other anions present.
During electrolysis, reduction occurs at the cathode, where cations accept electrons and are reduced. Among the cations present in the mixture, K+ and Ba2+ are less likely to be reduced as they have a high reduction potential. Among the anions, Cl- has the highest reduction potential and is thus more likely to be reduced first. Br- and F- have lower reduction potentials, so they are less likely to be reduced. Additionally, Ba2+ and F- can form stable compounds, further decreasing their chances of being reduced. Overall, Cl- is the most likely candidate for reduction during electrolysis of this mixture of molten salts.
Learn more about molten salts here :
https://brainly.com/question/25360914
#SPJ11
Given the following reaction: 2D(g) 3E(g)F(g) 4G(g) H(g) a) When the concentration of D is decreasing by 0.10 M/s, how fast is the concentration of H [ Select ] increasing? b) When the concentration of G is increasing by 0.20 M/s, how fast is the concentration of E [Select ] decreasing? [Select ] c)What is the rate of reaction?
Answers
In the given reaction, 2D(g) + 3E(g) → F(g) + 4G(g) + H(g), the rate of change of concentrations is related to the stoichiometric coefficients.
a) Using the stoichiometry of the reaction, we can see that for every 2 moles of D that react, 4 moles of H are produced. Therefore, the rate of increase in the concentration of H is 0.20 M/s.
b) Again using the stoichiometry, for every 4 moles of G that react, 3 moles of E are consumed. Therefore, the rate of decrease in the concentration of E is 0.15 M/s.
c) The rate of reaction can be determined by monitoring the concentration of any reactant or product over time. In this case, we could choose to monitor the concentration of any of the five species involved.
In this case, using D's decrease of 0.10 M/s, the rate of reaction is 0.05 M/s.
Learn more about stoichiometric coefficients here:
https://brainly.com/question/32088573
#SPJ11
Identify the type of heat transfer occurring in each situation.
You feel heat from a campfire.
Credit
A mug filled with a hot beverage warms your hands.
Credit
A heat lamp keeps baby chicks warm.
Credit
Warm water moves from the bottom of a pot to the top.
Credit
Thunderclouds form in the atmosphere.
Credit
A snowball melts in your hands.
Credit
A hot dog cooks over a campfire.
Credit
A cool breeze blows onto the beach on a hot day.
Credit
The Sun causes snow to sublimate on a clear winter day.
Credit
A spoon placed in a cup of hot tea becomes hot to the touch.
Answers
You feel heat from a campfire: Radiation
A mug filled with a hot beverage warms your hands: Conduction
A heat lamp keeps baby chicks warm: Radiation
Warm water moves from the bottom of a pot to the top: Convection
Thunderclouds form in the atmosphere: Convection
A snowball melts in your hands: Conduction
A hot dog cooks over a campfire: Conduction
A cool breeze blows onto the beach on a hot day: Convection
The Sun causes snow to sublimate on a clear winter day: Radiation
A spoon placed in a cup of hot tea becomes hot to the touch: Conduction
Heat can be transferred through three different methods: conduction, convection, and radiation. Conduction is the transfer of heat through direct contact between two objects. Convection is the transfer of heat by the movement of a fluid, such as air or water. Radiation is the transfer of heat through electromagnetic waves.
In the given situations, the heat transfer by radiation occurs from the campfire, heat lamp, and sun. Conduction occurs when you feel the warmth of a hot beverage or the hot dog cooking over the campfire. Convection occurs in the atmosphere, where warm air rises, and cool air falls, leading to thundercloud formation, or when warm water moves from the bottom of a pot to the top.
To know more about the Heat transfer, here
https://brainly.com/question/13433948
#SPJ1