If 1.70g of aniline reacts with the 2.10 g of bromine, the theoretical yield of 4-bromoaniline is 2.25 g.
1 mole mole of the aniline react with the 1 mol of Br₂ produces 1 mole of the 4 - bromoaniline.
mass of aniline = 1.70 g
molar mass of aniline = 93 g/mol
moles of aniline = 0.0182 mol
mass of Br₂ = 2.10 g
molar mass of Br₂ = 160 g/mol
moles = 2.10/ 160
= 0.0131 mol
Br₂ is limiting reagent .
moles of 4-bromoaniline = 0.0131
mass of 4-bromoaniline = moles × molar mass
= 0.0131 × 172
= 2.25 g
Thus, the theoretical yield is 2.25 g.
To learn more about theoretical yield here
https://brainly.com/question/11022817
#SPJ4
What is the cause of periodic repetition of properties of elements?
The periodic repetition of properties of elements is due to the regular arrangement of electrons in the atoms of those elements. This regular arrangement is known as the "periodic table" of elements. This is due to the behavior of electrons in atoms and the increasing number of valence electrons as atomic number increases, resulting in a regular pattern of electron configurations and properties.
Elements are arranged in the periodic table according to increasing atomic number. Elements in the same vertical row (group) have similar chemical and physical properties, and elements in the same horizontal row (period) have similar electronic configurations of their atoms.
The reason for this repeating periodic property is the behavior of the electrons in the atoms. As the atomic number increases, the number of protons in the nucleus increases, and the number of electrons in the atom increases. These electrons occupy different energy levels or shells around the atomic nucleus. The outermost shell electrons, the so-called valence electrons, are responsible for the chemical behavior of atoms and participate in chemical bonds. As the atomic number increases, the number of valence electrons in the atom increases. This results in a regular pattern of electron configurations and thus a regular pattern of properties.
Learn more about periodic repetition here:https://brainly.com/question/1917984
#SPJ4
A group of students decided to test some parameters of gases using a balloon. The students filled two balloons to the same volume. One balloon was placed in a freezer and the other was left at room temperature. The balloons were left and checked after three hours.
Student A claimed that the balloon in the freezer would be the same size as the balloon at room temperature after the three hours were up.
Student B claimed that the balloon in the freezer would be larger than the balloon at room temperature after three hours.
Student C claimed that the balloon in the freezer would be smaller than the balloon at room temperature after three hours.
Which student's claim is correct? Explain your reasoning!
Answer:
Student C.
Explanation:
At higher temperatures, the particles move faster and collide with each other more frequently, which causes the gas to occupy a larger volume. At lower temperatures, the particles move slower and collide less frequently, which causes the gas to occupy a smaller volume.
When the balloon is placed in the freezer, the temperature inside the balloon will also decrease, causing the gas particles to slow down and collide less frequently, which leads to a decrease in the volume of the gas, hence the balloon will shrink or contract. On the other hand, the room temperature balloon will experience no significant change in the temperature and the gas particles inside the balloon will remain at the same level of activity, causing the balloon to retain the same volume.
5. Calculate the heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C.
Here is the Conclusion 240. Heat energy affects a substance’s intermolecular forces as the substance changes between states.
How to get the State changes?Heat energy increases during the following state changes
Solid - (melting)
Liquid -gas (evaporation)
Solid- gas (sublimation)
Heat energy decreases during the following state changes
Gas- liquid (condensation)
Liquid → solid (freezing)
Gas –solid (deposition)
An intermolecular force (IMF) (or secondary force) is the force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of nearby particles, such as atoms or ions.
To learn more about intermolecular to refer:
https://brainly.com/question/9328418
#SPJ1
The heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C. 2016.6 J.
How does heat energy become created?When the temperature rises, molecules and atoms move faster and collide, creating heat generated (also known as heat energy). Thermal energy is the heat that results from heated substance's temperatures.
Calculation :The following phrase may be used to determine the change in heat energy in a process like melting.
S = H * m / T
where:
S = entropy [kJ]
H = fusion heat = 3.36*10¹ [J/kg]
m = mass = 0.02 [kg]
T = temperature in kelvin = 273 [K]
S = 0.02 * 5.00 * 10² / (273 + 0)
S = 2016.6 J
To know more about Heat energy visit:
https://brainly.com/question/25384702
#SPJ1
The complete question is -
Calculate the heat energy of 5.00 * 10² g of ice when it melts at 0.0°C. The heat of fusion of ice is 3.36 x 10'J/kg.
The reaction between NO(g) and O2(g) produces a single product. The reaction occurs in a rigid reaction vessel represented in the diagram above. Which of the following statements correctly predicts the change in average molecular velocity of the molecules as the reaction goes to completion at constant temperature and provides the correct explanation
The average molecular velocity of the molecules will decrease as the reaction goes to completion at a constant temperature.
What is Molecular velocity?
Molecular velocity is the average speed of molecules in a sample of matter. It is determined by the temperature of the sample, with higher temperatures resulting in higher molecular velocities.
This is because the reaction produces a single product, meaning that the number of molecules in the reaction vessel is decreasing as the reaction goes to completion. As the number of molecules decreases, the average molecular velocity of the molecules decreases as well.
To know more about molecular velocity,
https://brainly.com/question/17031383
#SPJ4
A chemist determined by measurements that moles of silver participated in a chemical reaction. Calculate the mass of silver that participated in the chemical reaction.
A chemist determined that moles of silver participated in a chemical reaction using measurements. The mass of silver involved in the chemical reaction is 1.08 grams.
Moles of silver participated = 0.01
Molar mass of silver = 108 gram/mole
Weight of silver participated= mole* molar mass
= 0.01*108 gram
= 1.08 gram
A chemist (from the Greek chm(a) alchemy; replacing chymist from Medieval Latin alchemist) is a scientist who studies chemistry. Chemists investigate the structure and properties of matter. Chemists meticulously describe the properties of molecules and their constituent atoms in terms of quantities. Chemists carefully measure the proportions of substances, the rates of chemical reactions, and other chemical properties. Pharmacists are commonly referred to as chemists in Commonwealth English.
Chemists apply their knowledge to learn the composition and properties of new substances, as well as to reproduce and synthesize large quantities of useful naturally occurring substances and to create new artificial substances and processes.
Learn more about chemist here:
https://brainly.com/question/30007736
#SPJ4
A sample of fluorine gas at STP contains 4.088x10^24 atoms. What is the volume in liters of the sample?
Record your answer to 1 decimal place. Do not put units on your answer.
According to the concept of Avogadro's number and STP conditions volume in liters of the sample is 15,388.7.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.
Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number
Number of moles is obtained as, number of atoms/Avogadro's number=4.088×10²⁴/6.023×10²³=6.78 moles on substitution in formula of PV=nRT=V=6.78×8.314×273/1=15,388.7 liters.
Thus, the volume is 15,388.7 liters of the sample.
Learn more about Avogadro's number,here:
https://brainly.com/question/11907018
#SPJ1
Which of the following is consistent with an exothermic reaction that is nonspontaneous at high temperatures?
A.
?H > 0, ?S > 0, ?G < 0
B.
?H < 0, ?S < 0, ?G > 0
C.
?H < 0, ?S > 0, ?G > 0
D.
?H > 0, ?S < 0, ?G < 0
E.
?H < 0, ?S > 0, ?G < 0
As a result, option c is correct: H must be negative and S must be positive.
What is exothermic reaction?Energy is transmitted to or from the surroundings when a chemical reaction occurs. An exothermic reaction occurs when energy is transmitted to the surroundings, and the temperature of the surroundings rises. The term exothermic implies "heating up." As an exothermic process progresses, energy, frequently in the form of heat, is released. An exothermic reaction is one that is chemical in nature and is characterized by the release of energy in the form of heat or light. Matching a light with a matchstick is an example of this sort of reaction in which the release is both heat and light.
Here,
The spontaneity can be determined by the equation as:
ΔG=ΔH−TΔS
If the Gibbs free energy is negative, it gives a spontaneous reaction. Hence, the ΔH must be negative and ΔS must be positive.
If the Gibbs free energy is positive then it will be non-spontaneous. Hence, ΔS must be negative at very high temperature.
Therefore, option c is correct that is the ΔH must be negative and ΔS must be positive.
To know more about exothermic reaction,
https://brainly.com/question/10373907
#SPJ4
What is the net charge on the following peptide at pH = 0?
Peptide sequence: DSVK
a. net charge = +2
b. net charge = +1
c. net charge = 0
d. net charge = -2
The net charge on the Peptide sequence: DSVK at pH = 0 is : a. net charge = +2.
What is peptide sequence?The process of identifying the amino acids that make up a peptide chain's structural sequence is known as peptide sequencing. This knowledge must be made public in order to understand the structure and function of a protein within a cell, which is useful for biomedical research applications.
By convention, the names of peptides are always written from left to right, beginning with the N-terminal end. For example, the name glycyl-histidine-phenylalanine refers to a peptide that comprises glycine at the N-terminus, followed by a histidine, and then phenylalanine at the C-terminus.
To know more about peptide sequencing , refer
https://brainly.com/question/14775253
#SPJ4
What mass of silver chloride can be prepared by the reaction of 170.0 mL of 0.23 M silver nitrate with 200.0 mL of 0.18 M calcium chloride
2.87 g of silver chloride can be made by reacting 200.0 mL of calcium chloride with 170.0 mL of silver nitrate, both of which have a 0.23 M silver nitrate concentration. Chemically, silver chloride is a substance.
AgCl is the chemical formula for this. It is generally known that this white crystalline substance is only weakly soluble in water. Silver chloride changes from grey to black or purplish in hue upon illumination or heating, indicating the presence of silver. As the mineral chlorargyrite, AgCl can be found in nature. Chemical processes take place everywhere around us, from the food our bodies metabolize to how the sunlight we receive is produced.
silver chloride mass: m (AgCl)=0.02*143,32g/mole=2.87 g, where n (AgCl) = (0.02*2)/2=0.02 moles.
Learn more about silver chloride here
https://brainly.com/question/12912140
#SPJ4
what point is swift makihng in a modest proposel by discounting other people and more humane solutions
Making people aware of how terrible hunger and poverty are in contemporary society is the aim of A Modest Proposal.
These kinds of problems are still important in today's culture and are not only confined to Swift's day. Jonathan Swift wrote an article titled "A Modest Proposal" that discusses hunger and poverty. Swift created it in 1729 as a means of drawing attention to how terrible these issues were.Most likely, this idea did seem excessive to many of his contemporaries, especially if they failed to grasp the text's satirical and sarcastic tone. Swift is trying to make a point about how things between the rich English and the poor Irish have gotten out of hand.
To learn more about Swift's please click on below link
https://brainly.com/question/15272045
#SPJ4
Balance the following double displacement reaction and determine the coefficients of all of the reactants and products.
___ BaCl2 +___ Na2CO3 --> ___ BaCO3 + ___ NaCl
This double displacement reaction and the coefficients of all the reactants and products in this balanced chemical reaction is Bacl₂ + Na₂CO₃ = BaCO₃ + 2Nacl.
What is a double displacement reaction?A double displacement reaction is a particular type of reaction in which two reactants swap ions to produce two new molecules. Water-soluble ionic compounds interact with one another in a number of double displacement processes.
What is the meaning of coefficients?Coefficients are the numbers or expressions put in front of a chemical symbol or formula to balance chemical equations. It provides information on the number of atoms or molecules of the drug or chemical that are a part of the reaction.
What is a chemical reaction?When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process. Chemical reactions typically involve a chemical change and produce one or more products, which typically differ from the reactants in some ways.
To know more about double displacement reaction, check out:
https://brainly.com/question/23918356
#SPJ1
How will you justify presence of 18 elements in 5th period and presence of 32 elements in 6th period?
The orbitals within subshells are filled in the sequence of increasing energy. The filling can choose from the 5s, 4d, as well as 5p sub-shells. Consequently, there are 18 total components in period 5.
There are 18 atoms in the 5th grade of the periodic table, never 32. Reason l=0, 1, 2, and 3 and n=5. The energy of the accessible electron shells 4d, 5s, and 5p grows in the correct sequence: 5s4d5p. and since there are a total of 9 accessible orbitals, 18 electrons could fit.
The fourth period includes 18 elements owing to the 10 extra electrons which the 3d orbitals can hold since the 3d sublevel doesn't really fill before the 4s sublevel.
To know more about period
https://brainly.com/question/16061498
#SPJ4
What could occur if the feedback loop of the knee je rk reflex was cut off at any points along its path?
If the feedback loop of the knee reflex was cut off at any points along its path, then there will be no response of knee reflex.
What does it mean if you don't have a knee reflex?Its results in harm to any part of your reflex arc, which can be due to a basic knee-medicinal condition. Healthcare suppliers can disclose hyporeflexia by spouting your knee with a rubber hammer.
If your doctor taps on a band and there isn't a reflexive movement in the muscle, it's a sign of knee-health matter. Usually, absent reflexes are created by an issue with the nerves in the tendon and muscle. You may have other muscle symptoms along with areflexia, like weakness, or atrophy.
So we can conclude that A decline reflex reply can be related to peripheral knee-nervous system disorders.
Learn more about reflex here: https://brainly.com/question/17261833
#SPJ1
A 2.317 gram sample of an oxide of iron was found to contain 1.677 grams of iron and 0.640 grams of oxygen. What is the simplest formula for this compound?
The simplest formula for a compound is made up of 1.677 grams of iron and 0.640 grams of oxygen would be FeO.
Empirical formulaWhat the question is asking here is the empirical formula of an oxide of iron made up of 1.677 grams of iron and 0.640 grams of oxygen. The empirical formula shows the formula in the simplest whole-number ratio of the atoms.
Iron (Fe) = 1.677 grams
Oxygen (O) = 0.640 grams
Converting the masses to moles:
Fe = 1.677/56 = 0.0299 mol
O = 0.640/16 = 0.0400 mol
Now, let's divide by the smallest mole:
Fe = 0.0299/0.0299 = 1.0
O = 0.0400/0.0299 = 1.3
Thus, the empirical formula of the oxide of iron is FeO.
More on empirical formulas can be found here: https://brainly.com/question/14044066
QUIZ 4: GOLDEN YEARS TO IONIZATION The elements with the highest ionization energy and thus the most unreactive are:
The elements with the highest ionization energy are the noble gases, which are located in the upper right corner of the periodic table. These elements include helium, neon, argon, krypton, xenon, and radon. These elements have a full valence electron shell, meaning that they have the maximum number of electrons possible in their outermost energy level. This makes them very stable and resistant to chemical reactions, as they do not have any electrons that can be easily removed or added.
As a result, they have very high ionization energy, meaning that a large amount of energy is required to remove an electron and form an ion. Due to these properties, these elements are not readily reactive with other elements and tend to exist as diatomic molecules or as individual atoms. These elements are used in a variety of industrial, medical, and everyday applications such as in lighting, refrigeration, and as inert gases in medical equipment and in the manufacturing of semiconductors.
Learn more about Ionisation Energy here: https://brainly.com/question/27356170
#SPJ4
Select the correct answer from each drop-down menu. what are the percent compositions of vanadium and lead? a metallurgist begins with 1,250 grams of vanadinite (pb5(vo4)3cl) and ends up with 135 grams of pure vanadium and 915 grams of pure lead. the percent composition of vanadium in the ore is , and the percent composition of lead is .
The percent composition of vanadium in the ore is 1A: 10.8%, and the percent composition of lead is 2B: 73.2%.
Vanadinite (Pb₅ (VO₄)₃Cl) = 1250 grams
Pure vanadium= 135 grams
Pure lead = 915 grams
Percent composition of vanadium =?
Percent composition of lead =?
The formula to find the percent composition is as follows:
Percent composition =(substance mass in grams/ sample mass in grams) × 100
1: Now solving to find the percent composition of vanadium by putting values in the formula:
Percent composition of vanadium = (vanadium mass/sample mass) × 100
Percent composition of vanadium = (135 g/ 1250 g) × 100
Percent composition of vanadium = 10.8 %
2: Now finding the percent composition of lead by using the same formula:
Percent composition of lead = (lead mass/sample mass) × 100
Percent composition of lead = (915 g / 1,250 g) × 100
Percent composition of lead = 73.2%
"
Complete question:
What are the percent compositions of vanadium and lead?
A metallurgist begins with 1,250 grams of vanadinite (pb5(vo4)3cl) and ends up with 135 grams of pure vanadium and 915 grams of pure lead.
The percent composition of vanadium in the ore is ______ , and the percent composition of lead is ________ .
OPTIONS:
1.
A. 10.8%
B. 14.3%
C. 14.8%
D. 62.4%
2.
A. 55.6%
B. 73.2%
C. 16.0%
D. 23.8%
"
You can learn more about percent composition at
https://brainly.com/question/17021926
#SPJ4
Answer:
10.8%
73.2%
Explanation:
I just did the test and its right on plato, Have a great a day!
If methane (CH4) has a tetrahedral molecular geometry, which of the following diagrams most likely represents its Lewis dot structure
The carbon atom is in the center of the structure and is surrounded by four hydrogen atoms.
What is structure?Structure is an organized arrangement of elements, such as components, materials, people, or ideas. It is a way of organizing and arranging the components of a system in order to achieve a desired outcome.
The most likely Lewis dot structure for methane (CH4) is the following:
The carbon atom is in the center of the structure and is surrounded by four hydrogen atoms. Each hydrogen atom has one electron in its outer shell, and the carbon atom has four electrons in its outer shell. All of the atoms are arranged in a tetrahedral shape, which matches the molecular geometry of methane.
To learn more about structure
https://brainly.com/question/28353159
#SPJ4
How many moles are there in 2.87x10^23 molecules C3H8?
Answer:
0,5 moles
Explanation:
N = L × n
n = N ÷ L
n = 2,87 × 10²³ ÷ 6,02 × 10²³
n = 2,87 ÷ 6,02
n = 0,47 moles or 0,5 moles
How does the volume change if 50mL of a gas material is cooled from 30\deg C to 5\deg C ?
50mL
46mL
100mL
56mL
The final volume can be determined using Charles's law. The volume of gas at 5 degree Celsius will be 8.3 ml.
What is Charles's law of gases ?According to Charles's law, at constant pressure, the volume of a gas is directly proportional to the temperature.
Hence, V/T = constant.
Let, V1 and T1 be the initial volume and temperature and V2, T2 be the final quantities.
then, V1/T1 = V2/T2.
V2 = V1 T2/ T1
Given, V1 = 50 ml
T1 = 30 °C
T2 = 5 °C
Then, V2 = 50 ml × 5 °C /30 °C = 8.3 ml
Therefore, the volume of the gas reduces to 8.3 ml.
Find more on Charles's law:
https://brainly.com/question/16927784
#SPJ1
why was the bohr model replaced
Answer:
The Bohr model of the atom was replaced by the quantum mechanical model because it was unable to explain the behavior of electrons in atoms. The quantum mechanical model was able to explain the behavior of electrons in atoms more accurately.
Explanation:
Write the balanced chemical equation that represents the addition of CL2 to CH3CH=CH2.
The balanced chemical equation that represents addition of CL2 to CH3CH=CH2 is : CH3CH=CH2 = CL2 > CH3CHClCH2Cl.
What is meant by balanced chemical equation?Balanced chemical equations have the same number and type of each atom on both the sides of an equation. Coefficients in a balanced equation has to be the simplest whole number ratio and mass is always conserved in chemical reactions.
Balanced equation is an equation for a chemical reaction where the number of atoms for each element in the reaction and total charge is same for both the reactants and products. In other words, we can say that mass and the charge are balanced on both sides of a reaction.
To know more about balanced chemical equation, refer
https://brainly.com/question/11904811
#SPJ4
What procedures should be followed if a chemical spill occurs?
Prevent the spread of dusts and vapors.Neutralize acids and bases, if feasible. Manage the spread of the liquid.absorb the liquid.Gather and incorporate the cleanup residues. Get rid of the wastes. Decontaminate the area and affected system.
Chemical spills are the uncontrolled launch of a dangerous chemical, both as a strong, liquid or a gas. these spills need to be minimized as tons as possible.
Chemical spills usually result from the dangerous handling of chemical compounds, incorrect chemical storage, chemical garage tank ruptures, incorrect containers for chemical disposal, and failure to eliminate chemical substances in a well timed way.
There are sorts of spills that you can run into: simple Chemical Spills and complex Chemical Spills. easy Chemical Spills are small, confined, and present minimal dangers.
To know more about chemical click here
https://brainly.com/question/26487468
#SPJ4
to produce 4.00 L of a 250. mM solution of sodium hydroxide, how many grams of NaOH must bee dissolved
You may determine the number of moles of solution you need by multiplying the volume in liters (4.00L) by the solution's molar concentration (0.250M), and then by the mass of sodium hydroxide (39.99 g/mol) in molar form. 1L = 39.99g × 4.00L x 0.250 M x 39.99g
The number sodium hydroxide of moles of solute dissolved in one liter of a solution is known as its molarity.
where,
250 mM Molarity =
moles of solute = n
= liquid volume in milliliters = 4L = 4000 ml
Now, using the molarity formula to combine all the values provided, we obtain
To learn more about sodium hydroxide please click on below link
https://brainly.com/question/29327783
#SPJ4
Part A
Determine the value of Kp for the following reaction:
4HCl(g)+O2(g)⇌2Cl2(g)+2H2O(g)
Express the equilibrium constant to three significant digits.
To determine the value of Kp for a reaction, we need to know the concentrations of all the reactants and products at equilibrium.
In this case, we are not given the equilibrium concentrations, so we cannot directly calculate Kp. Instead, we can use the ideal gas law to relate the equilibrium concentrations to the partial pressures of the gases, and use those partial pressures to calculate Kp.The equation for the ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. If we assume that the reaction occurs at a constant volume and a constant temperature, we can use the ideal gas law to relate the equilibrium partial pressures of the gases to the concentrations of the gases.Given that we have no information about the equilibrium concentrations or partial pressures, we can not calculate Kp.
To learn more about equilibrium constant here:
https://brainly.com/question/10038290
#SPJ4
Which freezes faster, hot water or cold water?
Answer: Hot water freezes faster.
Explanation: It is because of the Mpemba effect taking place, and even though it seems impossible, it could have less dissolved gas in it, or even take up less mass because of this.
Look at the general chemical equation below. A B C Which situation best describes the effect of a limiting reactant
The situation that best describes the effect of a limiting reactant is that when there is not enough A reactant to react with whole B.
The limiting reactant, also known as the limiting reagent, is the reactant that is used first during a chemical reaction, hence restricting the amount of product that can be produced. The limiting reactant can be identified in a variety of methods ,but they all require employing mole ratios from the balanced chemical equation.
The theoretical yield is the maximum quantity of product possible given the limiting reactant. The quantity of product actually procured, or actual yield, is usually always less than the theoretical yield. The percentage yield used to describe the actual yield indicates what portion of the theoretical yield was attained.
In the equation there is only one situation which describes the effect of limiting reagent when there is not enough of A to react with whole B.
Learn more about limiting reactant
brainly.com/question/2948214
#SPJ4
A gas has a pressure of 120 kPa, a temperature of 400 K and a volume of 50.0 mL. What volume will the gas have at a pressure of 60 kPa and a temperature of 200 K
The gas will have a volume of 25.0 mL at a pressures of 60 kPa or a temperature of 200 K.
What is temperature?The average kinetic potential of the particle in a system is measured by temperature. Temperature is measured using thermometers, which measure the temperature of a system by taking a reading of the system's average kinetic energy. Temperature is measured in degrees, with higher temperatures indicating a higher average kinetic energy. Temperature can be affected by a variety of factors, including the amount of energy added to or removed from a system, the number of particles present in the system, and the type of particles present in the system.
To learn more about temperature
https://brainly.com/question/2339046
#SPJ4
Help me please I have been stuck for some time
Answer:275.4 g Al2O3
Explanation: The mass of Al2O3 formed is 2.7 mol * 102 g/mol = 275.4 g. This is because the molar mass of Al2O3 is 102 g/mol. This means that when 1 mol of Al2O3 is formed, it has a mass of 102 g. Therefore, when 2.7 mol of Al2O3 is formed, it has a mass of 2.7 mol * 102 g/mol = 275.4 g.
CAN SOMEONE OR SOMEBODY HELP ME ASAP
Answer: ahem...
Explanation: 1. True 2. reproducing 3. All of them 4. i would say true, the only thing is plants dont really digest food and it says "all" organisms... 5. B, C, and D...A is more of defense and not really "maintaining structure"
A chemist titrates 110.0mL of a 0.2108M methylamine CH3NH2 solution with 0.4152M HCl solution at 25°C. Calculate the pH at equivalence. The pKb
of methylamine is 3.36Round your answer to 2 decimal places.Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of HCl solution added
At equivalence, the number of moles of methylamine and HCl are equal, and the pH of the solution is 4.76.
At equivalence, the number of moles of methylamine and HCl are equal, so we can use the equation:
n(CH3NH2) = n(HCl)
0.2108M * 110.0mL = 0.4152M * V
V = 52.4mL
Total volume of the solution: 110.0mL + 52.4mL = 162.4mL
We can use the Henderson-Hasselbalch equation to calculate the pH at equivalence:
pH = pKb + log([CH3NH2]/[HCl])
pH = 3.36 + log(0.2108M/(0.2108M + 0.4152M))
pH = 3.36 + log(0.2108M/(0.6259M))
pH = 3.36 + log(0.3389)
pH = 3.36 + (-0.4719)
pH = 4.76
For more questions like Solution pH click the link below:
https://brainly.com/question/491373
#SPJ4