If 25.0 ml of a 2.0 m naoh solution is used for the reaction

The net ionic equation of the reaction of AgNO₃ and CaCl₂:

Ag⁺ (aq)  + Cl⁻ (aq)  →  AgCl (s)

The net ionic equation can be described as an equation that represents only those elements, ions, that directly contributed to that chemical reaction.

We can write a chemical equation for the formation of AgCl:

2 AgNO₃ + CaCl₂ → 2 AgCl (s) + Ca(NO₃)₂

The complete ionic equation can be written for the above reaction is:

2 Ag⁺ (aq) + 2 NO₃⁻ (aq)  + Ca²⁺ (aq) + 2 Cl⁻  → 2 AgCl (s) + Ca²⁺ (aq) + 2NO₃⁻ (aq)

In the ionic equation, the calcium and nitrate ions appear unchanged on both sides of the equation. When we mix the two solutions, neither the calcium nor nitrate ions participate in the reaction. So calcium and nitrate ions can be eliminated from the ionic equation.

Ag⁺ (aq)  + Cl⁻ (aq)  →  AgCl (s)

Learn more about the net ionic equation, here:

brainly.com/question/15466794

#SPJ1

The half-life of sodium-25 is 237 seconds.

The half-life of a radioactive substance is the amount of time it takes for half of the initial amount of the substance to decay. In this case, 1.00 gram of a 16.00-gram sample of sodium-25 remains unchanged after 237 seconds, which means that half of the initial sample has decayed in that amount of time.

Therefore, the half-life of sodium-25 is 237 seconds. It's worth mentioning that the half-life of radioactive isotopes can vary depending on the element and the specific isotope. Also, the half-life of a radioactive element is an important factor in the safe handling and disposal of nuclear waste, because it determines how long the radioactive material remains dangerous.

To learn more about half-life visit: https://brainly.com/question/12341489

#SPJ4

Answer:

The pressure of the gas when the temperature drops to 65°C is 133 Torr.

Explanation:

Please let me know if this helped!!!

The absolute configuration of any of the amino acid is :

             H                                     H

              |                                        |

HOOC - C - NH₂                  H₂N - C - COOH

              |                                        |

            CH₃                                   CH₃

The configuration of the amino acid is indicated by the pointing H at the rear, the R group is in the right direction , The COOH group is in the left direction and the NH₃ group in the upward direction.

             H                                     H

              |                                        |

HOOC - C - NH₂                  H₂N - C - COOH

              |                                        |

            CH₃                                   CH₃

D - amino acid                      L - amino acid

The proteins which are naturally obtained are consist of the L - amino acid.  The L - of the amino acid are the one that found in the nature easily.

To learn more about amino acid here

https://brainly.com/question/29269947

#SPJ4

Involves the reduction of one molecule CuI+e to Cu and the oxidation of another CuI to CuII+e. A different illustration of a disproportionation reaction is the interaction of halogens with hydroxide ions, such as Cl2(g)+2OH(aq) Cl(aq)+ClO(aq)+H2O(l).

One mole of aluminium weighs 26.982 g, which may be found on the periodic table to determine the atomic mass and the number of grammes per mole.

The chemical name for aluminium is Al. 26.98 g/mol is the molar mass. The elemental form of metallic aluminium is present (the most fundamental form is the elemental form, which is expressed in the periodic table). We can use the formula 2(n2) because the atomic number of aluminium is 13.

Reaction to displacement This reaction is a synthesis since it involves the combination of two reactants (Al and O2) to produce a single product, Al2O3. Utilize all of the digits associated with the atomic weights as listed on their periodic table. Use the resulting molar mass after adding them all up. Avoid rounding the molar mass.

To learn more about molecule refer to:

https://brainly.com/question/19922822

#SPJ1

Ionic bonds, also known as electrovalent bonds, are a type of linkage created in a chemical molecule by the electrostatic attraction of ions with opposing charges.

When the valence electrons of one atom are permanently transferred to another atom, a bond of this kind is created. If an atom receives electrons, it becomes a charged ion, but if it loses them, it becomes a positively charged ion.

Ionic or electrovalent compounds are produced via ionic bonding, and the compounds generated between nonmetals and alkali and alkaline-earth metals serve as the best examples of this type of compound.

Want to know more about ionic bonds visit the link which is given below;

https://brainly.com/question/11527546

#SPJ4

The coefficient that would be in the front of NaCl will be 2.

The normal balanced equation of reaction between sodium (Na) and chlorine molecule (Cl2) is as follows:

[tex]2Na + Cl_2 --- > 2NaCl[/tex]

Thus 2 moles of Na is required to completely react with 1 mole of [tex]Cl_2[/tex] to produce 1 mole of NaCl.

In the reaction depicted reaction 4 moles of Na and 12 moles of [tex]Cl_2[/tex] were made available for the production of NaCl. However, the mole ratio for a complete reaction is 2 moles of Na to 1 mole of NaCl.

2 moles Na = 1 mole NaCl

4 moles Na = 4x1/2 = 2 moles NaCl

This means that the coefficient of NaCl in the equation should be 2.

However, there is a catch. The [tex]Cl_2[/tex] seems to be in excess.

2 moles Na = 1 mole of [tex]Cl_2[/tex]

4 moles Na = 4x1/2

                   = 2 moles of [tex]Cl_2[/tex]

This means about 6 moles of [tex]Cl_2[/tex] will be in excess.

More on mole ratios can be found here: https://brainly.com/question/15288923

#SPJ1

4Na + 8Cl2 ---------> ? NaCl

What is the coefficient that belongs in front of NaCl?

the conjugate acid for each base is conjugate acid of H2PO−4 : HPO4^2-, conjugate acid of SO2−4 : HSO4-, conjugate acid of NH3 : NH4+

A conjugate acid-base pair is a pair of substances that differ by only a proton. An acid is a substance that donates a proton (H+) in a chemical reaction, while a base is a substance that accepts a proton. When an acid loses a proton, it becomes its conjugate base, and when a base gains a proton, it becomes its conjugate acid.For example, the conjugate acid of the base NH3 is NH4+ and the conjugate acid of the base H2O is H3O+. The conjugate acid and the base are in equilibrium with each other, and the acidity constant (pKb) of the base is related to the basicity constant (pKa) of the conjugate acid. In acid-base reactions, the acid donates a proton to form its conjugate base, and the base accepts a proton to form its conjugate acid.

Learn more about acid-base pair here:

https://brainly.com/question/15579188

#SPJ4

Potential Energy stored in bond of molecules is called chemical energy.

To learn more about Potential Energy refer to:

https://brainly.com/question/14427111

#SPJ4

The proportion of exams scores between 68 and 73 points is 38.09%.

We must first determine the z-score for both points.

The z-score formula is:

Z-score is equal to (x-mean)/SD.

Given that in this instance:

Mean = 70

SD = 5

So, for a 68-point exam grade:

(68 - 70) / 5 is the z-score.

= –2 / 5

= –0.4

And for a 73 point exam grade:

(73 - 70) / 5 is the z-score.

= 3 / 5

= 0.6

Thus, the likelihood:

P (68 < x < 73) = P (–0.4 < z < 0.6)

Through the z-table:

P (–0.4 < z < 0.6)

= (0.5 – 0.3446) + (0.7258 – 0.5) (0.7258 – 0.5)

= 0.3809

= 38.09%

As a result, 38.09% of exam scores fall between 68 and 73 points.

Learn more about z-score at: brainly.com/question/15016913

#SPJ4

Calcium phosphate can be converted into phosphorus using the following reaction: 6CaSiO3-(aq) + 2Ca3(PO4)2(s) = 6SiO2(s) + 10C(s).

Thus, the amount of moles for phosphorus is equal to the quantity of phosphorous divided by its molar mass. Now divide the molarity of phosphorus, which is 31 g each mole and weighs 114.95 g. Graham and this crime should cancel each other out. And after solving, 3.71 malls result.

You need to know the product's mass and its molarity (h t), which corresponds to the mass with one mole of the product, in order to determine the moles of the a substance.

TO KNOW MORE ABOUT MOLARITY VISIT:

https://brainly.com/question/8732513

SPJ1

C. nonpolar covalent is the nature of C-Cl bond in the compound CCl4 having (Electronegativity: C-2.5, C-3,0).

A covalent bond is a chemical bond formed by the sharing of electrons between two atoms. The bond between C and Cl in CCl4 is a covalent bond. The electronegativity difference between C and Cl is small (EN C = 2.5 and EN Cl = 3.0), indicating that the bond is nonpolar covalent. In a nonpolar covalent bond, the electrons are shared equally between the atoms, and there is no separation of charge. The atoms have the same pull on the electrons, meaning that the electrons are shared equally between the atoms. In this case, the bond between C and Cl is nonpolar covalent because the electronegativity of C and Cl are similar, and the electrons are shared equally. Therefore, the bond is not polarized and there is no separation of charge. To sum up, C-Cl bond in CCl4 is not ionic and not polar covalent, it is a nonpolar covalent bond.

To know more about covalent bond click below:

https://brainly.com/question/10777799#

#SPJ4

the best Lewis structure for CH3CH(CH3)CH2C(CH2CH3)2CHO, a neutral molecule has been shown in the image

A Lewis Structure is a very simple example of a molecule's valence shell electrons. It is used to depict how electrons in a molecule are set up around individual atoms. Gilbert N. Lewis, who introduced the Lewis structure in his 1916 article The Atom and the Molecule, was decided to name after it. Lewis structures broaden on the electron dot diagram notion by trying to add routes among atoms to portray shared pairs in a chemical bond. The Lewis Symbol is generated by putting dots chosen to represent electrons in the external energy around the element symbol.

Learn more about Lewis Structure here:

https://brainly.com/question/12476602

#SPJ4

Option C ; At any of an infinite number of distances, depending on its energy .

Bohr described the Hydrogen atoms in terms of an electron moving in a circular route about a nexus. He supposed that the electron was confined to certain pathways characterized by separate powers.It explains the emigration and absorption spreads of atomic hydrogen and hydrogen- suchlike ions with low atomic numbers. It was the first model to introduce the generality of a quantum number to describe atomic countries and to postulate quantization of electron pathways in the tittles. Bohr’s model is an important step in the development of quantum mechanics, which deals with multitudinous- electron particles. It was the first model to introduce the conception of a amount number to describe infinitesimal countries and to hypothecate quantization of electron routeways in the snippet. Bohr’s model is an important step in the development of amount mechanics, which deals with numerous- electron tittles.

Learn more about Bohr's model here:

https://brainly.com/question/10091720

#SPJ4

When pipes leak, the environment's air, water, soil, and climate might be harmed. When there is a lot of rain and flooding, pipes that span rivers and streams are more likely to burst.

Acid rain, deteriorating water quality, groundwater contamination, and the greenhouse effect's intensification are only a few significant environmental effects. Aside from destroying ecosystems that, in some cases, may be unique, the oil and gas industry may also be a factor in the decline of biodiversity. Drilling and milling machines have both advantages and drawbacks.

Benefits: accurate points, good feed control, and challenging to roll. Retraction's shortcomings include its lack of flexibility and inability to process large or deep holes. Furthermore, methane, a greenhouse gas 21 times more potent than carbon dioxide, is released in enormous quantities by the oil and gas sector. In total, the industry is to blame for 3.8% of all greenhouse gases, or 38% of all methane emissions in the United States.

To lean more about drilling refer to :

https://brainly.com/question/29617181

#SPJ1

Complete this table for the H₂O :

a. T=143.61 °C , saturated mixture

b. p = 2319.6 kpa . u, kJ/kg = 2601.30

c. u, kJ/kg = 806.00, compressed liquid

d. T = 450 °C , superheated vapor

The complete table for the H₂O is as :

T [°C]      p [kpa]          u [kJ/kg]             phase description

143.61      400               1450                     Saturated mixture

220          2319.6           2601.30               Saturated vapor

190           2500             806.00               Compressed liquid

450          4000             3040                  Superheated vapor

The compressed liquid is also called as a sub cool liquid, that means the substance that not about to vaporized. The super heated vapor is. the steam at the temperature higher than the vaporization point at absolute pressure.

To learn more about phase description here

https://brainly.com/question/30088344

#SPJ4

To find partial pressure from mole fraction, we have to multiply mole fraction with total pressure in the event.

Partial pressure is a result of multiplying of mole fraction and total pressure or in formula it is written as Pfraction = molefraction x Ptotal. To make it easief for you to understand, let's see the example below:

Let say we have a room with 24.2 g of He and 4.32 g of O2 at 2.611 atm pressure. In this case, before we calculate the partial pressure we have to calculate the mole fraction

24.2 g Neon x 1 mol Neon / 20.18 g Neon = 1.199 mol Neon

4.32 g Oxygen x 1 mol Oxygen / 31.998 g O2 = 0.135 mol Oxygen.

Total moles =  1.199 x 0.135 = 1.334 mol gas

Mole fraction Ne = 1.199 mol/1.334 mol = 0.899

Mole fraction O₂ = Oxygen: 0.135/1.334 = .101

Then find the partial pressure

PNe = mole fraction Ne x Ptot = 0.899 x 2.611 atm = 2.35 atm

PO2 = mole fraction O ₂ x Ptot = 0.101 x 2.611 atm = 0.264 atm

Laern more about partial pressure here

https://brainly.com/question/14119417

#SPJ4

The independent variable here is the distance water traveled out of the carton.

The factors of the subject or the things that have an impact on the experiment are known as the variables of an experiment. Three different sorts of variables exist. These variables are control, independent, and dependent.

Independent variables are ones that are not under the experimenter's direct control. The experimenter can alter or regulate the dependent variables. Control variables are those that don't change or are constrained during the experiment.

The carbon's journey distance is the dependent variable in this situation when Mario studied how far room temperature water would spurt out of a plastic milk carton when 3mm holes were punched at different heights from the bottom of the container.

To learn more about variables in an experiment, click at:

brainly.com/question/3210387

#SPJ4

The mass of carbondioxide that will be produced from the reaction of 37.5g of C₂H₆ is 110 grams.

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, ethane reacts with oxygen to produce carbondioxide and water as follows:

2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O

Based on the above reaction, 2 moles of ethane produces 4 moles of carbondioxide

37.5g of ethane = 1.25moles of ethane

moles of carbondioxide = (1.25 × 4) ÷ 2 = 2.5 moles

mass of carbondioxide = 2.5mol × 44g/mol = 110grams of carbondioxide.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Answer:

Convection 

is the movement of heat by a fluid such as water or air. The fluid (liquid or gas) moves from one location to another, transferring heat along with it. This movement of a mass of heated water or air is called a current. Radiation is the transfer of heat by electromagnetic waves.

The lower boiling point of propane  makes it better in winter compared to butane.

The term LPG stands for liquified petroleum gases. It is one of the kinds of the gases that we can be able to use as fuel. We have to know that the gases that are used as fuel are the gases that are able to burn very well as this is key in the use of the fuel.

In the winter, we would need to use a gas that has a much lower boiling point and this is why in this case, the propane would be found to be better than butane due to its lower boiling point.

Learn more about LPG:https://brainly.com/question/22425958

#SPJ1

Answer:

A substance with particular chemical properties including turning litmus red, neutralizing alkalis, and dissolving some metals; typically, a corrosive or sour-tasting liquid of this kind. Often contrasted with alkali and base.

The highest pH is 1

Hope this helps:)

When a solution is acidic, its pH will vary from 0 to 6.9. The pH of a basic solution may range from 7.1 to 14. When a solution is neutral, its pH will be 7.

A solution is a uniform mixture made up of two or more elements that have particles smaller than one nanometer. There are many different types of solutions, such as soda water, salt-and-sugar solutions, and others. A solution looks to have one phase for each component.

A solution in chemistry is a mixture of several substances in quantities that can be adjusted up to

To know more about solution visit:

https://brainly.com/question/15567577

#SPJ4

There are 112 oxygen atoms in 5.00 moles of MgSO4. This is because MgSO4 is composed of 1 mole of magnesium (Mg), 1 mole of sulfur (S), and 4 moles of oxygen (O).

What is composed?

Composed is a term used to describe the process of creating something, usually through artistic means. It can be used to refer to writing a song, painting a picture, or composing a poem. It can also refer to the creation of a musical composition or arrangement, either by an individual or as part of a team.

Therefore, if there are 5.00 moles of MgSO4, there would be 4 x 5.00 = 20 moles of oxygen, and since there are 6.02 x 10^23 atoms per mole, there would be 20 x 6.02 x 10^23 = 1.204 x 10^25 oxygen atoms.

Composed can also refer to the arrangement of elements in a piece of art or design, or the overall structure of a work. In some cases, the term may be used to refer to the creative process of planning and assembling a work, such as a book, movie, or painting.

To learn more about composed.

https://brainly.com/question/2246399

#SPJ1

According to question the pressure of the gas is 4.45 atm.

Pressure is a physical force exerted on a surface by an object or a liquid. It is measured in units of force per unit area, such as pounds per square inch (psi) or pascals (Pa). Pressure is created when a force is applied to an object, causing it to compress or expand.

The pressure of the gas can be calculated using the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

To calculate the pressure, we first need to calculate the number of moles of CO₂ gas in the container. We can do this by using the molar mass of CO₂, which is 44.01 g/mol.
n = (78.1 g CO₂) / (44.01 g/mol) = 1.77 mol
Now that we have the number of moles, we can calculate the pressure using the ideal gas law.
P = (1.77 mol)(0.0821 L·atm/K·mol)(273 K) / (48.0 L)
P = 4.45 atm

To learn more about pressure
https://brainly.com/question/24719118
#SPJ1

The air pressure at the top of Mount Everest in atmospheres is equal to 0.2618 atm.

In Science, pressure can be defined as a measure of the force exerted per unit area of an object or physical body. This ultimately implies that, pressure is usually measured in Newton per meter square and calculated by using this formula:

P = F/A

Where:

Generally speaking, air pressure can be measured in other units such as the following:

In order to convert the value of pressure in millimeters of mercury (mm Hg) to atmosphere, we would divide by 760 as follows:

Air pressure = 199/760

Air pressure = 0.2618 atm.

Read more on pressure here: brainly.com/question/10013312

#SPJ1

Answer: 0.261842

Explanation:

NO and NO₂ are the free radicals.

The species which is having unpaired as well as odd number of electrons will be considered as a free radical. If the number comes out to be odd, the concerned species will be considered as a free radical. In case of NO₂, the total number of electrons is 23 (7 from nitrogen and 16 from two oxygen atoms) and in case of NO the total  number of electrons is 15 (7 from nitrogen and 8 from oxygen).  Hence, the species are free radical.

Whereas, in case of [tex]ClO3^{-}[/tex], the  total  number of electrons is 42 (17 from chlorine and 24 from three oxygen and +1 for negative charge) and in case of [tex]NO2^{-}[/tex]the total number of electrons is 24 (7 from nitrogen and 16 from oxygen and +1 for negative charge) There are even no.  of electrons. Hence the [tex]ClO3^{-}[/tex] and [tex]NO2^{-}[/tex] are not a free radical.

To know more about free radicals here

https://brainly.com/question/29422803

#SPJ4

The resulting empirical formula is Na2CrO4.

The empirical formula of a compound is the simplest whole-number ratio of the elements it contains. To calculate the empirical formula, we must first determine the molar ratio of the elements by dividing their masses by their respective molar masses.

For sodium, the molar mass is 22.99 g/mol. Therefore, the molar ratio of sodium is 29.84 g / 22.99 g/mol = 1.30 mol.
For chromium, the molar mass is 51.99 g/mol. Therefore, the molar ratio of chromium is 39.7 g / 51.99 g/mol = 0.76 mol.
For oxygen, the molar mass is 16.00 g/mol. Therefore, the molar ratio of oxygen is 72.67 g / 16.00 g/mol = 4.54 mol.
To get the empirical formula, we must divide each of the molar ratios by the smallest molar ratio, which in this case is 0.76 (for chromium). The resulting empirical formula is Na2CrO4.

To learn more about empirical formula
https://brainly.com/question/1603500
#SPJ1

The section of the periodic table in Figure 1 that is most likely to contain element R is section A.

To learn more about conductor refer:

brainly.in/question/15510573

#SPJ1