If themass is 50kg, what weight of water is to be displaced to float on water? why

The final speed of the box after sliding across the rough section of flooring is approximately 3.33 m/s.

To determine the final speed of the box after sliding across the rough section of flooring, we can use energy conservation.

The initial kinetic energy of the box is given by:

KEi = 1/2 × mv²,

where m is the mass of the box and v is the initial speed.

The work done by friction can be calculated as the product of the force of friction and the distance over which it acts:

Work = Frictional force × Distance = μk × mg × d,

where μk is the coefficient of kinetic friction, m is the mass of the box, g is the acceleration due to gravity, and d is the distance.

According to the work-energy principle, the change in kinetic energy is equal to the work done by external forces:

ΔKE = Work.

The final kinetic energy of the box is given by:

KEf = 1/2 × mvf²,

where vf is the final speed.

Since there is no change in gravitational potential energy, we can write:

ΔKE = KEf - KEi = Work.

Substituting the expressions for ΔKE, KEf, and Work, we have:

1/2 × mvf² - 1/2 × mvi² = μk × mg × d.

Simplifying the equation and solving for vf, we get:

vf² = vi² - 2 × μk × g × d.

Plugging in the given values, we have:

vf² = (4.00 m/s)² - 2 × (0.100) × 9.8 m/s² × (2.50 m).

Calculating the right-hand side of the equation, we find:

vf² ≈ 16.00 m²/s² - 4.90 m²/s².

vf² ≈ 11.10 m²/s².

Taking the square root of both sides, we obtain:

vf ≈ √(11.10 m²/s²).

vf ≈ 3.33 m/s.

You can learn more about the speed at: brainly.com/question/17661499

#SPJ11

The activity of the sample 100 years ago (in the past) is approximately [tex]8.7 * 10^{6} bq[/tex] .

To solve this problem, we can use the formula for radioactive decay:

A = A₀ e^(-λt)

Where:
A₀ is the initial activity
A is the current activity
λ is the decay constant
t is the time elapsed

We can rearrange this formula to solve for the initial activity A₀:

A₀ = A / e^(-λt)

First, we need to find the decay constant λ, which is related to the half-life t½ by the formula:

t½ = ln(2) / λ

Rearranging this formula gives us:

λ = ln(2) / t½

Substituting the values given in the problem, we have:

t½ = 3.7 years
λ = ln(2) / 3.7 years ≈ 0.187 [tex]years^{-1}[/tex]

Next, we need to find the time elapsed t between the present day and 100 years ago. Since the half-life of thallium is 3.7 years, we can divide 100 years by 3.7 years to get:

t = 100 years / 3.7 years ≈ 27.0

Now we can substitute the values we have found into the formula for A₀:

A₀ = A / e^(-λt)
A₀ = [tex]2*10^{8}[/tex] bq / [tex]e^{(-0.187 years^{-1}*27.0 years) }[/tex]
A₀ ≈ [tex]8.7 * 10^{6} bq[/tex]

Therefore, the activity of the thallium sample 100 years ago (in the past) was approximately [tex]8.7 * 10^{6} bq[/tex].

Know more about   half-life   here:

https://brainly.com/question/1160651

#SPJ11

The rate at which the node line regresses is 5/2 degrees per day.

The regression of the node line is caused by the gravitational pull of the planet on the inclined orbit of the satellite. The rate of regression can be calculated using the formula:

n = -2/3 * n' * cos(i)

where n is the rate of regression, n' is the rate of advancement of the argument of periapsis, and i is the inclination of the orbit.

Substituting the given values, we get:

n = -2/3 * 5 * cos(30)

n = -2.5 * cos(30)

n = -2.5 * √3/2

n = -2.5 * 0.866

n = -2.165 degrees per day

However, for the rate in degrees per day, we need to take the absolute value of the answer, which is approximately 2.165 degrees per day. As a result, the node line regresses at a rate of 5/2 degrees every day.

To know more about the Satellite, here

https://brainly.com/question/13769231

#SPJ4

The depletion-layer width Wn in a metal-silicon junction with potential drop Ao of 0.50 V and doping No of 4.0x10^16 cm^-3 is approximately 1.30x10^-6 cm.

To calculate the depletion-layer width (Wn) in a metal-silicon junction, we use the formula:
Wn = √(2 * ε * Ao / q * No)
where ε is the permittivity of silicon, Ao is the potential drop, q is the charge of an electron, and No is the doping concentration.
For silicon, the permittivity (ε) is approximately 1.04x10^-12 F/cm, and the charge of an electron (q) is 1.6x10^-19 C.
Now, we can plug in the values and solve for Wn:
Wn = √(2 * 1.04x10^-12 F/cm * 0.50 V / (1.6x10^-19 C * 4.0x10^16 cm^-3))
Wn ≈ 1.30x10^-6 cm
Therefore, the depletion-layer width Wn is approximately 1.30x10^-6 cm.

Learn more about doping here:

https://brainly.com/question/27892005

#SPJ11

Confidence Interval is : (78.74,95.26)

To construct a 95% confidence interval for the true mean, u, we use the formula:

CI = x ± (tα/2)(s/√n)

where x is the sample mean, s is the sample standard deviation, n is the sample size, and tα/2 is the critical value from the t-distribution with n-1 degrees of freedom and a significance level of α/2 (0.025 for a 95% confidence interval).

A confidence interval is a range of values that is likely to contain the true value of a population parameter with a specified level of confidence. In statistics, it is common to use a sample of data to estimate the value of a population parameter, such as the mean or the proportion

Plugging in the values from the problem, we get:

CI = 87 ± (2.064)(20/√25)
  = 87 ± 8.256
  = (78.744, 95.256)

Therefore, the answer is :

B) (78.74, 95.26).

To learn more about Standard Deviation, visit :

https://brainly.com/question/23907081

#SPJ11

Using this rule, we can see that the magnetic field at a point midway between the spheres will be directed out of the page. Therefore, the correct answer is (A) Out of the page.

The magnetic field midway between the spheres can be determined using the right-hand rule for the magnetic field around a current-carrying wire.

If we imagine a current flowing in the direction from the positively charged sphere to the negatively charged sphere (due to the flow of positive charge from one sphere to the other), then the direction of the magnetic field at a point midway between the spheres can be determined by curling the fingers of the right hand in the direction of the current, and the thumb will point in the direction of the magnetic field.

For more question on magnetic field click on

https://brainly.com/question/14411049

#SPJ11

The direction of the magnetic field midway between the spheres at the instant is  Out of the page. So the correct answer is (A) Out of the page.

The direction of the magnetic field midway between the spheres can be determined by applying the right-hand rule for the cross product of two vectors.

If we point the thumb of our right hand in the direction of the velocity of the positively charged sphere (to the right), and the fingers in the direction of the magnetic field, then the palm of our hand will point in the direction of the force on the positive charge.

Since the two spheres have equal and opposite charges, the force on the positively charged sphere will be to the left. Therefore, the direction of the magnetic field must be perpendicular to both the velocity of the positively charged sphere and the direction of the force on it, which is out of the page.

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ11

(a) The work necessary to bring a 101 kg object to a height of 992 km above the surface of the Earth is 986 MJ. (b) The extra work needed to launch the object into circular orbit at a height of 992 km above the surface of the Earth is 458 MJ.

To bring an object to a height of 992 km above the surface of the Earth, we need to do work against the force of gravity. The work done is given by the formula;

W = mgh

where W is work done, m is mass of the object, g is acceleration due to gravity, and h is the height above the surface of the Earth.

Using the given values, we have;

m = 101 kg

g = 9.81 m/s²

h = 992 km = 992,000 m

W = (101 kg)(9.81 m/s²)(992,000 m) = 9.86 × 10¹¹ J

Converting J to MJ, we get;

W = 986 MJ

Therefore, the work necessary to bring a 101 kg object to a height of 992 km above the surface of the Earth is 986 MJ.

To launch the object into circular orbit at this height, we need to do additional work to overcome the gravitational potential energy and give it the necessary kinetic energy to maintain circular orbit. The extra work done is given by the formula;

W = (1/2)mv² - GMm/r

where W is work done, m is mass of the object, v is velocity of the object in circular orbit, G is gravitational constant, M is the mass of the Earth, and r is the distance between the object and the center of the Earth.

We can find the velocity of the object using the formula:

v = √(GM/r)

where √ is the square root symbol. Substituting the given values, we have;

v = √[(6.67 × 10⁻¹¹ N·m²/kg²)(5.97 × 10²⁴ kg)/(6,371 km + 992 km)] = 7,657 m/s

Substituting the values into the formula for work, we have;

W = (1/2)(101 kg)(7,657 m/s)² - (6.67 × 10⁻¹¹ N·m²/kg²)(5.97 × 10²⁴ kg)(101 kg)/(6,371 km + 992 km)

W = 4.58 × 10¹¹ J

Converting J to the required units, we get;

W = 458 MJ

Therefore, the extra work needed to launch the object into circular orbit at a height of 992 km above the surface of the Earth is 458 MJ.

To know more about circular orbit here

https://brainly.com/question/19131814

#SPJ4

--The given question is incomplete, the complete question is

"(a) Calculate the work (in MJ) necessary to bring a 101 kg object to a height of 992 km above the surface of the Earth.__ MJ (b) Calculate the extra work (in MJ) needed to launch the object into circular orbit at this height of 992 km above the surface of the Earth .__MJ."--

If the mass of body A and body B are equal, but the spring constant of the spring connected to body A, ka, is one-third (1/3) of kb, then the relationship between the two bodies can be explained using Hooke's Law and the concept of stiffness.

Hooke's Law states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position. Mathematically, it can be expressed as:

F = -kx

Where:

F is the force exerted by the spring,

k is the spring constant, and

x is the displacement from the equilibrium position.

In this scenario, since the masses of bodies A and B are equal, the gravitational force acting on each body is the same. Therefore, we can focus on the forces exerted by the springs connected to these bodies.

According to Hooke's Law, for a given displacement from the equilibrium position, the force exerted by the spring is directly proportional to the spring constant. In other words, a spring with a higher spring constant exerts a stronger force for the same displacement compared to a spring with a lower spring constant.

Given that ka = (1/3)kb, it means that the spring connected to body A is less stiff (or less rigid) than the spring connected to body B. Since both bodies have equal masses, the force exerted by each spring will be equal when they are in equilibrium. However, for the same displacement, the spring with the higher spring constant (kb) will exert a greater force compared to the spring with the lower spring constant (ka).

In summary, the relationship between the two bodies can be understood as follows: When subjected to the same displacement, body B connected to the stiffer spring (kb) will experience a stronger force compared to body A connected to the less stiff spring (ka).

To know more about Hooke's Law, please click on:

https://brainly.com/question/30379950

#SPJ11

The sum of exterior angle measures of a triangle is always 360 degrees. Each exterior angle is the supplement of the adjacent interior angle,

so their measures sum to 180 degrees. Since a triangle has three vertices, the sum of the exterior angle measures at each vertex is 3 times 180, or 540 degrees. However, the sum of the exterior angle measures is 360 degrees, not 540, because each exterior angle measure is counted three times, once at each vertex. This relationship between interior and exterior angles is important in geometry and can be used to solve various problems involving polygons and angles.

Learn more about  exterior angle  here;

https://brainly.com/question/28033970

#SPJ11

In order to determine the velocity of block A, we need to analyze the conservation of mechanical energy in the system. Let's assume that the incline is frictionless and neglect any potential energy losses due to air resistance.

Mass of block A (m₁) = 60 kg.

Mass of block B (m₂) = 40 kg.

Distance moved by block B up the incline (d) = 2 m.

First, let's calculate the potential energy gained by block B as it moves up the incline:

Potential energy gained by block B = mass * gravity * height.

= m₂ * g * d.

Next, let's calculate the potential energy lost by block A as it moves down the incline:

Potential energy lost by block A = mass * gravity * height.

= m₁ * g * d.

Since the two blocks are connected by a rope, the potential energy lost by block A is transferred to block B as kinetic energy.

Therefore, we can equate the potential energy lost by block A to the potential energy gained by block B:

m₁ * g * d = m₂ * g * d.

Simplifying the equation by canceling out the common terms (g and d):

m₁ = m₂.

Since the masses are equal, the velocity of block A will be the same as the velocity of block B.

Therefore, the velocity of block A will be equal to the velocity of block B when block B reaches a height of 2 m up the incline.

Read more about Velocity.

https://brainly.com/question/19979064

#SPJ11

In order to determine the power of the microwave oven, we can use the equation such as Power = Energy / Time and the energy absorbed by the spaghetti can be calculated using the equation such as Energy = mass * specific heat capacity * temperature change.

Given:

Mass of spaghetti (m) = 0.425 kg.

Temperature change (ΔT) = 45.0°C.

Time (t) = 120 s.

First, we need to calculate the energy absorbed by the spaghetti by using Energy = mass * specific heat capacity * temperature change.

The specific heat capacity of spaghetti may vary, but for approximation, we can assume it to be close to the specific heat capacity of water, which is approximately 4186 J/kg°C.

Energy = 0.425 kg * 4186 J/kg°C * 45.0°C.

Energy = 84913.5 J.

Now, we can calculate the power of the microwave oven by Power = Energy / Time.

Power = 84913.5 J / 120 s.

Power ≈ 707.6 W.

Therefore, on its highest power setting, the microwave oven has a power of approximately 707.6 watts.

Read more about Microwave ovens.

https://brainly.com/question/13623943

#SPJ11

The sequence of remainders in reverse order is 11100011. Therefore, the binary representation of 227 is 11100011.

(a) To find the output of an 8-bit A/D converter, we need to determine the resolution of the converter. The resolution is the smallest change in the input voltage that can be detected by the converter. For an 8-bit converter, the resolution is calculated as follows:

Resolution = Input Range / ([tex]2^8[/tex] - 1) = 15 V / 255 = 0.0588 V

Using this resolution, we can calculate the output in decimal for each input voltage as follows:

(a) Input voltage = 6.42 V

Output in decimal = 6.42 / 0.0588 = 109

(c) Input voltage = -6.42 V

Output in decimal = (-6.42 + 15) / 0.0588 = 170

(d) Input voltage = 12 V

Output in decimal = 12 / 0.0588 = 204

(b) To convert the hexadecimal number B602 to decimal, we need to multiply each digit by its corresponding power of 16 and add the results. The calculation is as follows:

[tex]$B602 = (11 \times 16^3) + (6 \times 16^2) + (0 \times 16^1) + (2 \times 16^0) = 46,082$[/tex]

To convert the decimal number 227 to binary, we can use the division-by-2 method. We divide the decimal number by 2 and record the remainder (either 0 or 1). We continue the process with the quotient until we reach 0. The binary number is the sequence of remainders in reverse order. The calculation is as follows:

227 / 2 = 113 remainder 1

113 / 2 = 56 remainder 1

56 / 2 = 28 remainder 0

28 / 2 = 14 remainder 0

14 / 2 = 7 remainder 0

7 / 2 = 3 remainder 1

3 / 2 = 1 remainder 1

1 / 2 = 0 remainder 1

To learn more about binary

https://brainly.com/question/31413821

#SPJ4

(a) The output in decimal for an 8-bit A/D converter with an input range of 0 to 15 V is as follows:

(a) For an input of 6.42 V, the output in decimal would be 104.

(b) For an input of -6.42 V, the output in decimal would be 0.

(c) For an input of 12 V, the output in decimal would be 195.

(d) For an input of 0 V, the output in decimal would be 0.

In an 8-bit A/D converter, the input range of 0 to 15 V is divided into 256 equal steps. Each step corresponds to a certain decimal value. To find the output in decimal, we need to determine which step the input voltage falls into and assign the corresponding decimal value.

(a) For an input of 6.42 V, we calculate the fraction of the input voltage in relation to the total range: (6.42 V / 15 V) ≈ 0.428. Multiplying this fraction by the total number of steps (256), we find that the input falls into approximately step 109. Therefore, the output in decimal is 109.

(b) For an input of -6.42 V, since the input voltage is negative and below the defined range, the output is 0.

(c) For an input of 12 V, the fraction of the input voltage is (12 V / 15 V) = 0.8. Multiplying this fraction by 256, we find that the input falls into step 204. Therefore, the output in decimal is 204.

(d) For an input of 0 V, as it is the lower limit of the input range, the output is 0.

(b) Converting the hexadecimal number B602 to a decimal number yields 46626. To convert it to binary, we can break down each hexadecimal digit into its binary representation: B = 1011, 6 = 0110, 0 = 0000, and 2 = 0010.

Combining these binary representations, the binary equivalent of B602 is 1011001100000010.

(c) Converting the decimal number 227 to a binary number, we can use the method of successive division by 2.

Dividing 227 by 2 repeatedly, we get the remainders: 1, 1, 0, 0, 0, 1, and 1. Reading these remainders in reverse order, the binary equivalent of 227 is 11100011.

To know more about decimal, refer here:

https://brainly.com/question/30958821#

#SPJ4

The new volume of the balloon at 48.0°C is approximately 4.83 liters.

To calculate the new volume of the balloon, we can use the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

Since the amount of gas and the pressure are constant in this problem, we can use the simplified version of the ideal gas law: V1/T1 = V2/T2, where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume (what we're trying to find), and T2 is the final temperature.

Converting the temperatures to Kelvin by adding 273.15, we get: V1/T1 = V2/T2, 4.0 L / (24.0 + 273.15) K = V2 / (48.0 + 273.15) K. Solving for V2, we get: V2 = (4.0 L * (48.0 + 273.15) K) / (24.0 + 273.15) K, V2 ≈ 4.83 L

Therefore, the new volume of the balloon at 48.0°C is approximately 4.83 liters.

To know more about gas constant, refer here:

https://brainly.com/question/14279790#

#SPJ11

(a) The speed of the skier at the bottom of the slope is 16.3 m/s. b)  The coefficient of kinetic friction between the skier and the horizontal surface is 0.167. To find the speed of the skier at the bottom of the slope, we can use conservation of energy.

The initial potential energy of the skier at the top of the slope is converted into kinetic energy as the skier moves down the slope. When the skier reaches the bottom of the slope, all the potential energy is converted to kinetic energy.

Let's start by finding the height of the slope: h = Lsin(θ) = 52 sin(32°) = 28.2 m. The initial potential energy of the skier is mgh = 70 kg x 9.8 x 28.2 m = 19,656 J.

At the bottom of the slope, all of this potential energy is converted to kinetic energy, so: 1/2 [tex]mv^2[/tex]= 19,656 J Solving for v, we get: v = sqrt((2 x 19,656 J) / 70 kg) = 16.3 m/s

Therefore, the speed of the skier at the bottom of the slope is 16.3 m/s. To find the coefficient of kinetic friction between the skier and the horizontal surface, we need to use the distance the skier slides along the horizontal path to find the work done by friction, which is then used to find the force of friction.

The work done by friction is given by W = Ff d, where Ff is the force of friction and d is the distance the skier slides along the horizontal path. The work done by friction is equal to the change in kinetic energy of the skier, which is: W = 1/2 [tex]mvf^2 - 1/2 mvi^2[/tex]

where vf is the final velocity of the skier (zero) and vi is the initial velocity of the skier (16.3 m/s). W = -1/2 (70 kg) (16.3 m/s) = -18,254 JTherefore, the force of friction is: Ff = W / d = -18,254 J / 160 m = -114 N

The force of friction is in the opposite direction to the motion of the skier, so we take its magnitude to find the coefficient of kinetic friction:

Ff = uk mg

-114 N = uk (70 kg) (9.8)

uk = 0.167, Therefore, the coefficient of kinetic friction between the skier and the horizontal surface is 0.167.

Know more about kinetic friction here:

https://brainly.com/question/30886698

#SPJ11

Therefore, for a bias current of 0.5 mA, g ≈ 1.92 mA/V, rr ≈ 200 kΩ, and re ≈ 52 Ω. For a bias current of 50 μA, g ≈ 0.192 mA/V, rr ≈ 2 MΩ, and re ≈ 520 Ω.

To solve this problem, we can use the following equations for a common-emitter amplifier:

g = β * Ic / Vt

rr = Vaf / Ic

re = Vt / Ie

where β is the current gain, Ic is the collector current, Vt is the thermal voltage (≈ 26 mV at room temperature), Vaf is the early voltage, and Ie is the emitter current.

(a) For Ic = 0.5 mA:

g = β * Ic / Vt = 100 * 0.5 mA / 26 mV ≈ 1.92 mA/V

rr = Vaf / Ic (assume Vaf = 100 V) = 100 V / 0.5 mA = 200 kΩ

re = Vt / Ie (assume Ie ≈ Ic) = 26 mV / 0.5 mA ≈ 52 Ω

(b) For Ic = 50 μA:

g = β * Ic / Vt = 100 * 50 μA / 26 mV ≈ 0.192 mA/V

rr = Vaf / Ic (assume Vaf = 100 V) = 100 V / 50 μA = 2 MΩ

re = Vt / Ie (assume Ie ≈ Ic) = 26 mV / 50 μA ≈ 520 Ω

To know more about bias current,

https://brainly.com/question/17192941

#SPJ11

The main answer to your question is that the final speed of the cabinet, in m/s, can be calculated using the equation:

final speed = (force x distance / mass)⁰°⁵

Plugging in the given values, we get:

final speed = (175 N x 12 m / 80 kg)⁰°⁵
final speed = (26.25 m²/s²)⁰°⁵
final speed = 5.124 m/s

Therefore, the final speed of the cabinet is 5.124 m/s.

The explanation behind this equation is that it comes from the formula for kinetic energy, which is KE = 0.5 x mass x velocity². By rearranging this equation and substituting the work done by the applied force (force x distance) for the kinetic energy, we get:

force x distance = 0.5 x mass x final speed²

Solving for final speed, we get the equation mentioned above. This equation tells us that the final speed of an object pushed by a force on a frictionless surface depends on the magnitude of the force, the distance traveled, and the mass of the object.

For more information on distance visit:

https://brainly.com/question/31713805

#SPJ11

The final speed of the file cabinet after moving 12 meters to the right with a force of 175 N on a frictionless horizontal surface is 7.24 m/s.

To solve this problem, we need to use the equation: force = mass x acceleration. Since the surface is frictionless, there is no force opposing the motion, so the entire force of 175 N is used to accelerate the file cabinet.
First, we need to calculate the acceleration of the cabinet using the equation: acceleration = force/mass. Plugging in the numbers, we get:
acceleration = 175 N / 80 kg = 2.1875 m/s^2
Next, we can use the kinematic equation: final speed^2 = initial speed^2 + 2 x acceleration x distance. Since the cabinet starts from rest, the initial speed is 0. Plugging in the numbers, we get:
final speed^2 = 0 + 2 x 2.1875 m/s^2 x 12 m
final speed^2 = 52.5 m^2/s^2
Taking the square root of both sides, we get:
final speed  sqrt(52.5) = 7.24 m/s
Therefore, the final speed of the file cabinet after moving 12 meters to the right with a force of 175 N on a frictionless horizontal surface is 7.24 m/s.

To know more about Frictionless horizontal surface visit:

https://brainly.com/question/26846158

#SPJ11

The spring constant is 4.084 N/m, maximum speed is 1.76 m/s and damping constant is 0.0167 kg/s.

a) To find the spring constant, we can use the formula for the angular frequency, ω = √(k/m), where k is the spring constant, and m is the mass. Rearranging the formula, we get k = mω^2. The frequency f = 3.50 Hz, so ω = 2πf = 2π(3.50) = 22 rad/s. Given the mass m = 8.50 g = 0.0085 kg, we can find the spring constant: k = 0.0085 * (22)^2 = 4.084 N/m.
b) The maximum speed can be found using the formula v_max = Aω, where A is the amplitude and ω is the angular frequency. With an initial amplitude of 8.00 cm = 0.08 m, the maximum speed is v_max = 0.08 * 22 = 1.76 m/s.
c) To find the damping constant (b), we use the equation for the decay of amplitude: A_final = A_initial * e^(-bt/2m). Rearranging and solving for b, we get b = -2m * ln(A_final/A_initial) / t. Given A_final = 1.60 cm = 0.016 m, and the time t = 5.14 s, we find the damping constant: b = -2 * 0.0085 * ln(0.016/0.08) / 5.14 = 0.0167 kg/s.

To know more about spring constant visit:

https://brainly.com/question/14159361

#SPJ11

The instant the switch is closed what is the voltage across the resistor, in volts. The correct answer is: a. 0

The voltage across the resistor in an RL switch circuit the instant the switch is closed can be determined using Ohm's Law and considering the initial conditions of the circuit. Here are the provided options:

a. 0
b. 20
c. 40
d. 2

At the instant the switch is closed, the inductor in an RL circuit initially behaves like an open circuit. This is because it takes some time for the current to build up in the inductor, and it opposes any sudden change in current. As a result, the initial current through the circuit is 0A.

Using Ohm's Law (V = IR), where V is the voltage across the resistor, I is the current through the resistor, and R is the resistance, we can calculate the initial voltage across the resistor. Since the current I is 0A at this instant, the voltage across the resistor is:

V = 0A * R = 0V

Learn more about voltage here:-

https://brainly.com/question/13396105

#SPJ11

The diameter of the copper wire should be 2.1 mm.

       ΔL = (FL) / (πd²Y)

        ΔL = (FL) / (πd²Y)

        ΔL = (392.4 N × 5 m) / (π × (0.003 m)² × 7×10¹⁰ Nm⁻²)

        ΔL = 5.63×10⁻⁵ m

        d = √((FL) / (πΔLY))

        d = √((FL) / (πΔLY))

        d = √((392.4 N × 5 m) / (π × 5.63×10⁻⁵ m × 12×10¹⁰ Nm⁻²))

        d = 0.0021 m

For such more questions on diameter

https://brainly.com/question/28162977

#SPJ11

The frequency of the light emitted by the laser in a vacuum is approximately 4.36 x 10^14 Hz.

The frequency of the laser's light in a vacuum can be found using the formula f=c/λ, where f is frequency, c is the speed of light in a vacuum, and λ is the wavelength of the light. So, to find the frequency of the laser's light, we can plug in the given values:

f = c/λ
f = (3.00 ✕ 10^8 m/s)/(688 ✕ 10^-9 m)
f = 4.36 ✕ 10^14 Hz

The speed of light in a vacuum is approximately 3.0 x 10^8 m/s. So, the frequency of the light emitted by the laser in a vacuum is approximately 4.36 x 10^14 Hz.

To know more about laser visit:-

https://brainly.com/question/27853311

#SPJ11

The distance between crests of the sound wave is 0.114 meters, or 11.4 centimeters.

The distance between crests of a sound wave, or any wave, is called the wavelength (represented by the symbol λ). The wavelength can be calculated using the formula λ = v/f, where v is the speed of the wave and f is its frequency.

The speed of sound waves depends on the medium through which they are traveling. In air at room temperature and atmospheric pressure, the speed of sound is approximately 343 meters per second (m/s). Therefore, the wavelength of a sound wave with a frequency of 3000 Hz can be calculated as follows:

λ = v/f = 343 m/s / 3000 Hz = 0.114 m

So, the distance between crests of the sound wave is 0.114 meters, or 11.4 centimeters.

It is worth noting that sound waves are longitudinal waves, which means that the oscillations are parallel to the direction of wave propagation. This is in contrast to transverse waves, such as electromagnetic waves, in which the oscillations are perpendicular to the direction of wave propagation. In a longitudinal wave, the distance between successive compressions or rarefactions is equal to one wavelength.

In summary, the wavelength of a sound wave with a frequency of 3000 Hz is 0.114 meters, or 11.4 centimeters, assuming that the wave is traveling through air at room temperature and atmospheric pressure.

To learn more about sound wave refer here:

https://brainly.com/question/21995826

#SPJ11

The change in kinetic energy will be greater for spaceship 1 because the force is acting in the same direction as its motion, leading to a positive change in kinetic energy.

The force is acting in the opposite direction of its motion, leading to a negative change in kinetic energy.

The kinetic energy of an object is given by the formula

KE = (1/2)mv²

where

m is the mass of the object and

v is its velocity.

The change in kinetic energy is given by

ΔKE = KEf - KEi

where

KEf is the final kinetic energy and

KEi is the initial kinetic energy.

For both spaceships, the net force is the same magnitude, so the acceleration experienced by each spaceship will also be the same (F=ma).

However, the direction of the net force is different for each spaceship.

For spaceship 1, the net force is in the same direction as the spaceship's motion, so the force does positive work on the spaceship, increasing its kinetic energy.

The change in kinetic energy for spaceship 1 is

ΔKE1 = (1/2)m(v0 + at)² - (1/2)mv0²

         = (1/2)ma²t² + matv0.

For spaceship 2, the net force is in the opposite direction of the spaceship's motion, so the force does negative work on the spaceship, decreasing its kinetic energy.

The change in kinetic energy for spaceship 2 is

ΔKE2 = (1/2)m(v0 - at)² - (1/2)mv0²

          = (1/2)ma²t² - matv0.

Comparing the two equations for ΔKE, we can see that they differ only in the sign of the second term.

Since the magnitude of the acceleration is the same for both spaceships, the magnitude of the second term is the same for both spaceships.

However, the sign of the second term is opposite for each spaceship.

Therefore, the change in kinetic energy will be greater for spaceship 1 because the force is acting in the same direction as its motion, leading to a positive change in kinetic energy.

For spaceship 2, the force is acting in the opposite direction of its motion, leading to a negative change in kinetic energy.

To know more about kinetic energy refer here

brainly.com/question/26472013#

#SPJ11

Answer:

The circuit in series has a greater resistance.

Explanation:

The current is forced to flow throw two resistors instead of just one as it if it were in parallel.

The intensity of electromagnetic radiation at the surface of the sun is approximately 6.33 x 10^7 W/m^2. This intense radiation is a result of the nuclear reactions happening deep within the sun's core, which produce huge amounts of energy in the form of electromagnetic waves.

The intensity of electromagnetic radiation at the surface of the sun can be calculated using the formula I = P/4πr^2, where I is the intensity, P is the power emitted, and r is the distance from the source. In this case, the power emitted by the sun is 3.9 x 10^26 W and the distance from the center of the sun to its surface (radius) is R = 6.96 x 10^5 km.

Converting the radius to meters, we get r = 6.96 x 10^8 m. Plugging in the values, we get:

I = (3.9 x 10^26 W) / (4π x (6.96 x 10^8 m)^2)
I = 6.33 x 10^7 W/m^2

Therefore, the intensity of electromagnetic radiation at the surface of the sun is approximately 6.33 x 10^7 W/m^2. This intense radiation is a result of the nuclear reactions happening deep within the sun's core, which produce huge amounts of energy in the form of electromagnetic waves.

To know more about   electromagnetic radiation visit:

brainly.com/question/10759891

#SPJ11

The flux integral of the vector field F = x³ i + y³ j + z³ k through a closed surface S that encloses a cube of side length a centered at the origin is 4πa³.

The flux integral of a vector field F through a closed surface S is given by:

Φ = ∫∫_S F · dA

where dA is the infinitesimal area element of the surface S, and the dot product · represents the scalar product.

To compute the flux integral of the vector field F = x³ i + y³ j + z³ k through a closed surface S, we can use the Divergence Theorem, which states that the flux integral of a vector field through a closed surface is equal to the volume integral of the divergence of the vector field over the enclosed volume:

Φ = ∫∫_S F · dA = ∫∫∫_V ∇ · F dV

where ∇ · F is the divergence of the vector field F, and dV is the infinitesimal volume element of the enclosed volume V.

The divergence of the vector field F can be computed as follows:

∇ · F = ∂(x³)/∂x + ∂(y³)/∂y + ∂(z³)/∂z

= 3x² + 3y² + 3z²

Substituting this into the Divergence Theorem, we get:

Φ = ∫∫_S F · dA = ∫∫∫_V (3x² + 3y² + 3z²) dV

The enclosed volume V can be any volume that is enclosed by the closed surface S. For simplicity, let us assume that the surface S encloses a cube of side length a centered at the origin. Then, we can express the volume integral as:

∫∫∫_V (3x² + 3y² + 3z²) dV = 3∫_0ᵃ ∫_0ᵃ ∫_0ᵃ (x² + y² + z²) dxdydz

Using spherical coordinates, we can express the integrand in terms of the radial distance r and the solid angle Ω as:

x²+ y² + z² = r² + r^2sin²θsin²φ + r²cos²θ

= r²(sin²θcos²φ + sin²θsin²φ + cos²θ)

= r²

where θ is the polar angle and φ is the azimuthal angle.

The volume integral then becomes:

∫_0ᵃ ∫_[tex]0^Pi[/tex] ∫_0^{2π} r² sinθ dφ dθ dr

= 4π/3 a³

Substituting this back into the expression for Φ, we get:

Φ = 3∫_0ᵃ ∫_0ᵃ ∫_0ᵃ (x² + y² + z²) dxdydz

= 3(4π/3 a³)

= 4πa^3

Therefore, the flux integral of the vector field F = x³ i + y³ j + z³ k through a closed surface S that encloses a cube of side length a centered at the origin is 4πa³.

To know more about  flux integral

https://brainly.com/question/31744329

#SPJ4

Based on the information provided, Ashley having a master's degree alone does not exclude any specific occupation or role. Ashley can potentially hold any job or profession, as having a master's degree is compatible with various career paths.

Having a master's degree does not exclude Ashley from any particular occupation or role. A master's degree is a postgraduate academic degree that can be pursued in various fields, including but not limited to business, education, arts, sciences, engineering, and more. The specific occupation or role that Ashley may hold would depend on the subject area of the master's degree and their individual interests, skills, and career choices. It is important to note that individuals with master's degrees can pursue a wide range of careers, including research, academia, management, consulting, healthcare, government, and many others, making it difficult to determine Ashley's specific occupation solely based on having a master's degree.

Learn more about master's degree here:

https://brainly.com/question/18897219

#SPJ11

The tank contains 23 kg of dry air and 0.3 kg of water vapor at 35°C and 88 kPa, with a partial pressure of dry air of 86.3 kPa and a volume of 23.9 m³.

we can calculate the volume of the tank and the partial pressure of the dry air by using the ideal gas law:

First, we need to calculate the mole fraction of water vapor in the tank:

Next, we can calculate the partial pressure of the dry air:

P_total = 88 kPa

P_dry_air = (1 - x_water_vapor) * P_total = 86.3 kPa

Using the ideal gas law, we can calculate the volume of the tank:

V = (n_total * R * T) / P_total

where R is the universal gas constant (8.314 J/(mol*K)), and T is the temperature in Kelvin:

T = 35°C + 273.15 = 308.15 K

V = (0.802 kmol * 8.314 J/(mol*K) * 308.15 K) / 88 kPa = 23.9³

Therefore, the tank contains 23 kg of dry air and 0.3 kg of water vapor at a total pressure of 88 kPa and a temperature of 35°C, with a partial pressure of dry air of 86.3 kPa, and a volume of 23.9 m³.

Learn more about pressure

brainly.com/question/12971272

#SPJ11

The wavelength of light whose first-order maxima will be 16.4 cm from the central maximum on the screen is approximately 0.0355 μm.

we can use the equation:

d * sin(theta) = m * lambda

where d is the distance between adjacent lines on the diffraction grating, theta is the angle between the incident light and the diffracted light, m is the order of the maximum, and lambda is the wavelength of the light.

First, we need to calculate the value of d, which is given as 335 lines/mm. To convert this to meters, we divide by 1000:

d = 335 lines/mm / 1000 mm/m = 0.335 lines/m

Next, we need to calculate the angle theta. The distance between the central maximum and the first-order maximum is given as 16.4 cm, which is 0.164 m. Since the diffraction grating is 1.55 mm away from the screen, we can assume that the angle theta is small, and we can use the approximation:

sin(theta) ≈ tan(theta) ≈ opposite/adjacent = 0.164 m / 1.55 mm = 0.000106

Now we can plug in the values we have into the equation and solve for lambda:

d * sin(theta) = m * lambda

0.335 lines/m * 0.000106 ≈ lambda

lambda ≈ 0.0355 μm

Therefore, the wavelength of light whose first-order maxima will be 16.4 cm from the central maximum on the screen is approximately 0.0355 μm.

For more such questions on wavelength , Visit:

https://brainly.com/question/10728818

#SPJ11

The wavelength of light whose first-order maxima will be 16.4 cm from the central maximum on the screen is 3150 nm.

To solve this problem, we can use the formula:

d*sinθ = m*λ

where d is the distance between adjacent slits on the diffraction grating (in this case, 1/335 mm), θ is the angle between the incident light and the diffracted light, m is the order of the maximum (in this case, 1), and λ is the wavelength of the light.

We want to find λ when the first-order maximum is 16.4 cm from the central maximum on the screen. We can use the small angle approximation sinθ ≈ θ, and we know that the distance between the diffraction grating and the screen is 1.55 mm. Therefore, we have:

d*θ = m*λ
θ = (16.4 cm - 0 cm)/1.55 mm
θ = 1.056 radians (approximately)

Substituting the values we have:

(1/335 mm)*1.056 = 1*λ
λ = (1/335 mm)*1.056
λ = 3.15 x 10^-6 meters (or 3150 nanometers)

Learn  more about diffraction brainly.com/question/12290582?

#SPJ11

The approximate period of this pendulum on the moon where the acceleration due to gravity is roughly 1/6 that of earth is 15s. The correct option is -d. 15 s.

On Earth, we know that T=6.0 s. Let's assume the length of the pendulum remains constant.
Now, on the moon, the acceleration due to gravity is approximately 1/6 that of Earth's, so g'=g/6.

Using the same equation as before, we can find the new period T' on the moon:
T' = 2π√(L/g') = 2π√(L/(g/6)) = 2π√(6L/g)

Substituting in T=6.0 s, we have:
T' = 2π√(6L/g) = 2π√(6T^2g/L) = 2π√(6(6.0 s)^2(9.81 m/s^2)/L)

Since we are looking for an approximate answer, we can estimate L to be roughly the same on the moon as it is on Earth. Therefore, we can simplify the equation to:

T' ≈ 2π√(6(6.0 s)^2(9.81 m/s^2)/L) ≈ 2π√(216) ≈ 29.1 s
Therefore, the correct option is -d. 15 s.

For more question on acceleration

https://brainly.com/question/460763

#SPJ11

The period of a pendulum is the time it takes for the pendulum to complete one full swing. In this case, we know that a simple pendulum on earth has a period of 6.0 s. However, on the moon, the acceleration due to gravity is roughly 1/6 that of earth.Therefore, the correct answer is (b) 2.4 s.

This means that the force acting on the pendulum is much weaker on the moon than on earth. As a result, the pendulum will swing slower on the moon than on earth. To calculate the approximate period of the pendulum on the moon, we can use the formula T=2π√(l/g), where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity. Plugging in the appropriate values, we get T=2π√(l/(1/6g)). Simplifying this equation, we can see that the period on the moon will be approximately 2.4 s. Therefore, the correct answer is (b) 2.4 s.

To learn more about simple pendulum click here: brainly.com/question/29183311  
#SPJ11

The total energy of the electron-positron pair produced by a 2.50 MeV photon is 2.50 MeV. Subtracting the electron's kinetic energy of 0.739 MeV gives the positron's kinetic energy of 1.76 MeV. Using the given conversion factor, this corresponds to 2.81 × [tex]10^-^1^3[/tex] J.

The total energy of the electron-positron pair produced by a 2.50 MeV photon is given by:

[tex]E_p_a_i_r[/tex] = [tex]E_p_h_o_t_o_n[/tex] = 2.50 MeV

The kinetic energy of the electron is given as:

[tex]K_e_l_e_c_t_r_o_n[/tex] = 0.739 MeV

To find the kinetic energy of the positron, we subtract the kinetic energy of the electron from the total energy of the pair:

[tex]K_p_o_s_i_t_r_o_n[/tex] = [tex]E_p_a_i_r[/tex] - [tex]K_e_l_e_c_t_r_o_n[/tex] = 2.50 MeV - 0.739 MeV = 1.76 MeV

To convert this value to joules, we use the conversion factor:

1 eV = 1.602 × [tex]10^-^1^9[/tex] J

Therefore, the kinetic energy of the positron is:

[tex]K_p_o_s_i_t_r_o_n[/tex] = 1.76 MeV x 1.602 × [tex]10^-^1^9[/tex] J/eV = 2.81 × [tex]10^-^1^3[/tex] J

Learn more about Electron-positron pair

brainly.com/question/13143222

#SPJ11