if you are driving 110 km/h along a straight road and you look to the side for 2.0 s , how far do you travel during this inattentive period ? explain. ​

Answer:

R u from k12?? i am XD add me on discord my username is Hot Boy#1650

Explanation:

Answer:

1. Huge wildfires

2. Deforestation

3. Reduced amount of aforestation, etc

Answer:speeding up constantly

Explanation:

The graph between the time and the speed of the car shows that the speed is increasing constantly, so, option C is correct.

A moving object's rate of change in distance traveled is measured as speed. Speed is a scalar, which implies it is a measurement with a magnitude but no direction.

A thing that moves quickly and with high speed, covering a lot of ground in a short time. On the other hand, a slow-moving object traveling at a low speed covers a comparatively small distance in the same amount of time. An object with zero speed does not move at all.

Given:

The graph shows the speed of a car traveling east over a 12-second period,

As you can see from the graph, at time t = 0 sec the speed is 10 m/s,

At t = 3 sec, the speed = 15.3 m/s

At t = 6 sec, the speed = 20.3 m/s

Thus, speed is increasing constantly.

To know more about Speed:

https://brainly.com/question/13074982

#SPJ2

Answer: the earth

Explanation: Earth exerts a gravitational pull on the moon 80 times stronger than the moon's pull on the Earth. Over a very long time, the moon's rotations created fiction with the Earth's tugging back, until the moon's orbit and rotational locked with Earth.

and that's why the earth pulls the moon

Answer: 11400 m

Explanation:

Given:

t = 3.8 x 10^-5 s

v = 3 x 10^8 m/s

d = ?

Formula:

d = vt

  = (3.8 x 10^-5 s)(3 x 10^8 m/s)

  = 11400 m

hope this helps :)

The uniform movement allows to find the results for the distance from the radar to the plane is: 5.7 10³ m or 5.7 km

Kinematics studies the motion of objects looking for relationships between position, velocity and acceleration, in the special case that the acceleration is zero is called uniform motion and is described by the expression

                [tex]v = \frac{d}{t}[/tex]

                d = v t

Where v is the velocity, d the displacement and t the time.

Radar waves are electromagnetic waves with constant velocity

            v = 3 10⁸ m/s

They indicate that the time of the waves to go to the plane and return is 3.8 10⁻⁵ s, therefore if the speed is constant, the time to reach the plane is half of the total time.

          t = [tex]\frac{t_{total} }{ 2}[/tex]

          t = [tex]\frac{3.8 \ 10^{-5}}{2}[/tex]  

          t = 1.9 10⁻⁵ s

Let's calculate

        d = 3 10⁸ 1.9 10⁻⁵

        d = 5.7 10³

In conclusion with the uniform movement we can find the results for the distance from the radar to the plane is: 5.7 10³ m or 5.7 km

Learn more here: brainly.com/question/20369552

Answer:

Acceleration(a) = 0.75 m/s²

Explanation:

Given:

Force(F) = 3 N

Mass of thing(m) = 4 kg

Find:

Acceleration(a)

Computation:

Force(F) = ma

3 = (4)(a)

Acceleration(a) = 3/4

Acceleration(a) = 0.75 m/s²

Answer:

The value is    [tex]t = 56.68 \  s  [/tex]

Explanation:

From the question we are told that

   The rating of the hoist motor is  [tex]k  =  159hp = 159 *746 =118614 \ W[/tex]

    The  percentage of it power used is  [tex]z = 0.72 * 118614=85402.08 \ W[/tex]

      The  mass of the load is m  = 5550 kg

      The distance is  h = 89.0 m

The potential  energy required to lift the load through that distance is

     [tex]E =  m *  g * h[/tex]

=>    [tex]E =  5550 *  9.8 *  89.0[/tex]

=>   [tex]E =  4840710 \ J[/tex]

Generally the time taken is mathematically represented as

       [tex]t = \frac{E}{ z}[/tex]

=>    [tex]t = \frac{4840710}{ 85402.08}[/tex]

=>    [tex]t = 56.68 \  s  [/tex]

x = 1/2 at²

where x = length of runway, a = acceleration, and t = time.

600 m = 1/2 (12 m/s²) t²

t² = (1200 m) / (12 m/s²)

t² = 100 s²

t = 10 s

Answe ¡Buenos días! –

#3 ¡Buenas tardes! –

#4 ¡Bienvenid

Answer:

It must be 4 times high.

Explanation:

⇒      [tex]m*g*h = \frac{1}{2} * m*v^{2}[/tex]

       So, at the bottom of the ramp, all the gravitational potential energy

      must be equal to the kinetic energy of the car (Defining the bottom of

      the ramp as our zero reference for the gravitational potential energy):

       [tex]m*g*h_{1} = \frac{1}{2} * m*v_{1} ^{2}[/tex]  (1)

        [tex]m*g*h_{2} = \frac{1}{2} * m*(2*v_{1}) ^{2}[/tex] (2)

Answer:

a) v = 88.54 m/s

b) vf = 26.4 m/s

Explanation:

Given that;

m = 1400.0 kg

a)

by using the energy conservation

loss in potential energy is equal to gain in kinetic energy

mg × ( 3200-2800) = 1/2 ×m×v²

so

1400 × 9.8 × 400 = 0.5 × 1400 × v²

5488000 = 700v²

v² = 5488000 / 700

v² = 7840

v = √7840

v = 88.54 m/s

b)

Work done by all forces is equal to change in KE

W_gravity + W_non - conservative = 1/2×m×(vf² - vi²)

we substitute

1400 × 9.8 × ( 3200-2800) - (5 × 10⁶) = 1/2 × 1400 × (vf²  -0 )

488000 = 700 vf²

vf² = 488000 / 700

vf² = 697.1428

vf = √697.1428

vf = 26.4 m/s

Explanation:

you have given two questions which one to answer

Answer:

kenietic and potential i guess

Explanation:

Answer:

1.25 g/cm^3

Explanation:

mass-30.0g

volume- 4cm×2cm×3cm=24cm^3

density?

*to find density

Density=Mass/Volume

=30÷24

=1.25g/cm^3

Answer:

Explanation:

wavelength λ = 580 x 10⁻⁹ m

slit width d = 3.7 x 10⁻⁶ m

distance of screen D = 10 m

distance of first bright fringe =  1.5 x λ D / d

= 1.5 x 580 x 10⁻⁹  x 10 / 3.7 x 10⁻⁶

= 2351.34  x 10⁻³ m

= 2351.34 mm .

The complete question is;

A person with body resistance between his hands of 10 kΩ accidentally grasps the terminals of a 16-kV power supply. What is the power dissipated in his body?

A) If the internal resistance of the power supply is 1600 Ω , what is the current through the person's body?

B) What is the power dissipated in his body?

C) If the power supply is to be made safe by increasing its internal resistance, what should the internal resistance be for the maximum current in the above situation to be I_max = 1.00mA or less?

Answer:

A) I = 1.379 A

B) P = 19016.41 W

C) r = 15990000 Ω

Explanation:

A) We are given;

Internal resistance of the power supply; r = 1600 Ω

Body resistance between hands; R = 10kΩ = 10000 Ω

Power supply voltage; E =16 kV = 16000 V

Formula for the current through the person's body with internal resistance is given by;

I = E/(R + r)

Thus;

I = 16000/(10000 + 1600)

I = 1.379 A

B) Formula for power dissipated is;

P = I²R

P = 1.379² × 10000

P = 19016.41 W

C) Now, we are told that the maximum current should be I_max = 1.00mA or less. So, I_max = 0.001 A

Thus, from I = E/(R + r) and making r the subject, we have;

r = (E/I) - R

r = (16000/0.001) - 10000

r = 15990000 Ω

Density ρ is mass m per unit volume v, or

ρ = m / v

Solving for v gives

v = m / ρ

So the given object has a volume of

v = (130 g) / (65 g/cm³) = 2 cm³

Answer: Calculate the energy required in joules to raise the temperature of 450 grams of water from 15°C to 85°C? (The specific heat capacity of water is 4.18 J/g/°C)

Explanation:

The quantity of heat is required to raise the temperature of of water is 94050 joule.

Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another. An isolated system's total energy is constant regardless of the types of energy present.

The law of energy conservation is adhered to by all energy forms. The law of conservation of energy essentially says that the total energy of the system is conserved in a closed system, also known as an isolated system.

Mass of water: m = 450 grams

Initial temperature of water = 35° C

Final temperature of water = 85° C

Capacity of water is 4.18 J/g °C.

Hence, the  quantity of heat is required to raise = mass × Capacity  × raise in temperature

= 450 × 4.18 × (85 - 35) joule

= 94050 joule.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ6

Answer:

Isaac walked a distance of 5 blocks, and his displacement was 3 blocks north.

Explanation:

Distance is what he covered from the beginning, while displacement was what he covered in a specific direction

Answer:

x_{cm} = L / 2

Explanation:

The center of mass is defined by

         [tex]x_{cm}[/tex] = 1 / M ∑ m_{i}  x_{i}

where M is the total mass of the system

in this case the system is continuous so, for which we use the density

      ρ = dm / dx

      dm = ρ dx

substituting

        x_{cm} = 1 / M ∫ x ρ dx

        x_{cm} = ρ / M ∫ x dx

we integrate and evaluate from x = 0 to x = L

        x_{cm} = ρ / M (L² /2 -0)

we introduce the density which is constant

        ρ = M / L

        x_{cm} = 1 /M (M/L)  L² / 2

        x_{cm} = L / 2

Answer:

a = 2 [m/s^2]

Explanation:

To solve this problem we must use the expressions of kinematics, we must bear in mind that when a body is at rest its velocity is zero.

[tex]v_{f} = v_{i} - (a*t)[/tex]

where:

Vf = final velocity = 0

Vi = initial velocity = 60 [m/s]

a = desacceleration [m/s^2]

t = time = 30 [s]

Note: the negative sign of the above equation means that the car is slowing down, i.e. its speed decreases.

0 = 60 - (a*30)

a = 2 [m/s^2]

Answer:

A ) E/8

Explanation:

If the sphere of radius R  carries charge Q,  then the volumetric charge density is:

ρ₁ = [Q/ (4/3)*π*R³]

Therefore the net charge inside r  ( r < R ) is:

q₁ = ρ * (4/3)*π*r³

And E = K * q₁/r                  K = 9,98 *10⁹ [N*m²/C²]

E = K *  ρ * (4/3)*π*r³/r

E = K *  ρ * (4/3)*π*r²

If now the charge is distributed over a sphere of radius 2R

ρ₂ =  [Q/ (4/3)*π*(2R)³]

ρ₂ =  [Q/ (4/3)*π*8*R³]

Then  ρ₂ < ρ₁    in fact     ρ₂ = (1/8)*ρ₁

The electric field depends on the net charge enclosed by a gaussian surface, and the distance between the net charge and the considered point, ( considering the net charge as being at the center of the gaussian surface) In this case, there was no distance change then

E₂ = E₁/8

The right answer is lyrics  A ) E/8

Answer:

The effective value of g at 6700 m above the Earth's surface is 9.79 m/s².

Explanation:

The value of g can be found using the following equation:

[tex] F = \frac{GmM}{r^{2}} [/tex]

[tex] ma = \frac{GmM}{r^{2}} [/tex]

[tex] a = \frac{GM}{r^{2}} [/tex]

Where:

a is the acceleration of gravity = g

G: is the gravitational constant = 6.67x10⁻¹¹ m³/(kg.s²)

M: is the Earth's mass = 5.97x10²⁴ kg

r: is the Earth's radius = 6371 km      

Since we need to find g at 6700 m, the total distance is:

[tex] r_{T} = 6371000 m + 6700 m = 6377700 m [/tex]

Now, the value of g is:

[tex] a = \frac{GM}{r_{T}^{2}} = \frac{6.67\cdot 10^{-11} m^{3}/(kg*s^{2})*5.97 \cdot 10^{24} kg}{(6377700 m)^{2}} = 9.79 m/s^{2} [/tex]

Therefore, the effective value of g at 6700 m above the Earth's surface is 9.79 m/s².

I hope it helps you!

Answer:

Transform Boundary

Explanation:

The just slide past each other

Answer:

Transform Boundaries

Explanation:

Answer:

c. initial (x and y)

Explanation:

When a projectile is launched at a velocity with a launch angle, to solve it, we must first resolve the initial velocity into the x and y components. To do this will mean we have to treat it like a triangle due to the launch angle and the direction of the projectile.

Therefore, we will have to make use of trigonometric ratios which is also known by the mnemonic "SOH CAH TOA"

Thus, this method resolves the initial x and y velocities.

Answer:

see below

Explanation:

The triangle stands for the change in

We would change the change in x

Answer:

Δ This is the symbol of Delta which means Change

and x is length/distance/position.

Thus, Δx stands for Change in length/distance/position.

-TheUnknownScientist

Answer:

2156 N

Explanation:

Data obtained from the question include:

Mass of satellite (m) = 220 Kg

Force (F) of gravity =?

The force of gravity exerted on the satellite on the surface of the earth can be obtained by using the following formula:

Force (F) of gravity = mass (m) × acceleration due to gravity (g)

F = mg

Mass of satellite (m) = 220 Kg

Acceleration due to gravity (g) = 9.8 m/s²

Force (F) of gravity =?

F = mg

F = 220 × 9.8

F = 2156 N

Thus, the force of gravity exerted on the satellite on the surface of the earth is 2156 N

Answer:

light reflects when it hits the surface

Explanation:

Youngs double slit is a evidence for wave nature,

The properties refraction are attributed as properties of waves. The phenomena of interference and diffraction also fall in this category.

So,

     the answer must be B

Answer: Light does not need a medium to travel.

Explanation: I took the test and got it right :]