Explanation:
No need to calculate the force you can just find by Hookes law
Hookes law states that
F=-kxWhere
F is force ,k is spring constant x is distanceSo
force remains negative as per it
Acceleration=50/0.5÷1/3=100/3=33≈-30m/s²Option B
The term group polarization refers to the tendency for.
Polarization refers to the tendency for acquiring specific orientation by the oscillation.
What is polarization?Polarization is a property that specifies the geometrical orientation of the oscillations. In a transverse wave, the direction of the oscillation is perpendicular as compared to other that have parallel.
So we can conclude that Polarization refers to the tendency for acquiring specific orientation by the oscillation.
Learn more about polarization here: https://brainly.com/question/3040056
The velocity of a car increases by 40 m/s in 80 seconds. What is the
acceleration of the car?
A. 40 m/s2
B. 0.5 m/s2
C. 120 m/s2
D. 0.25 m/s2
Answer:
B
Explanation:
a=v/t
a=(40m/s)÷(80s)
a=0.5m/s
a girl walks 2 meters north 4 meters west and 2 meters south her final displacement is:
Enter an expression, in terms of defined quantities and g, for the force that the scale under left pillar shows
The expression, in terms of defined quantities and g is therefore Fu =((mg/2) +2 mp) g
What is a Scale?This can be defined as a balance or any of various other instruments or devices for weighing.
The expression in terms of defined quantities and g, for the force that the scale under left pillar shows that Fu =((mg/2) +2 mp) g .
Read more about Force here https://brainly.com/question/4515354
The expression, in terms of defined quantities and g, for the force that the scale under left pillar is (m(b)/2+2m(d))g.
What is the equilibrium state of a system?Equilibrium is the location of the system, in which the system be static does not change its position with respect to time.
The image of the uniform beam which has two pillar is attached below. In this pillar,
The length of the pillar is L and the mass is m(b)Pillars located at L/3 from either end.The system is in equilibrium.A duck is shown has the mass m(d).The expression, in terms of defined quantities and g, for the force that the scale under left pillar has to be find out.
In the equilibrium position torque in left pillar is zero,
[tex]\tau_{right} =0[/tex]
It can be written as,
[tex]F_L\dfrac{L}{3}=m_bg\dfrac{L}{6}+m_dg\dfrac{2L}{3}[/tex]
[tex]F_L=\left(\dfrac{m_b}{2}+2m_d\right)g[/tex]
Thus, the expression, in terms of defined quantities and g, for the force that the scale under left pillar is (m(b)/2+2m(d))g.
Learn more about the equilibrium state here;
https://brainly.com/question/1233365
#SPJ4
Rectangular plate has a voltage of +180V and plate to the first plate) has a 'voltage of -5V. Determie another rectangular plate (parallel to between these two plates? The distance of the field strength at any point separation of the plates is finite, say 8.6mm.
For a Rectangular plate has a voltage of +180V and a 'voltage of -5V. , the second plate has the Electric field mathematically given as
E=21.5*10^3v/m
What is the field strength?Generally, the equation for the Electric field is mathematically given as
E=v/d
Where
v={180-(-5)}v
v=185v
Therefore
E=185/8.6*10^{-3}
E=21.5*10^3v/m
In conclusion, Electric field
E=21.5*10^3v/m
Read more about electric field
https://brainly.com/question/9383604
meters/second?
A car accelerates from 4 meters/second to 16 meters/second in 4 seconds. The car's acceleration is what meters/second squared
Answer:
the acceleration of the car is 3 m/s².
Explanation:
A car initially travels west with a kinetic energy of 10 J. Then it travels east at three times its original speed. What is its kinetic energy when it is traveling east
KE₁ = 1/2mv²
10 J = 1/2mv²
KE₂ = 1/2m(3v)²
KE₂ = 1/2mv².9
KE₂ = 10 . 9 = 90 J
If an ocean wave passes a stationary point every 5 s and has a velocity of 10 m/s, what is the wavelength of the wave
Answer:
As Per Provided Information
Velocity of wave v is 10m/s
These ocean wave passes a stationary point every 5 s ( It's time period)
First we calculate the frequency of ocean wave .
Using Formulae
[tex] \blue{\boxed{\bf \: \nu = \cfrac{1}{v}}}[/tex]
here
v is the velocity of wave .
[tex]\sf\longrightarrow \nu \: = \cfrac{1}{10} \\ \\ \\ \sf\longrightarrow \nu \: = 0.1Hz[/tex]
Now calculating the wavelength of the wave .
Using Formulae
[tex] \boxed{ \bf \lambda = \cfrac{v}{ \nu}}[/tex]
Substituting the value and we obtain
[tex] \sf \longrightarrow \lambda \: = \cfrac{10}{0.1} \\ \\ \\ \sf \longrightarrow \lambda \: = \cancel\cfrac{10}{0.1} \\ \\ \\ \sf \longrightarrow \lambda \: =100m[/tex]
Therefore,
Wavelength of the wave is 100 metres.When does sound become damaging to the human ear?
A thermoacoustic generator transforms thermal energy into electrical energy. Thermal energy is transferred to a gas by a heat exchanger. The thermal energy causes the gas particles to vibrate rapidly and generate a sound wave. These vibrating gas particles are then used by an alternator to generate electrical energy. The gas used in this kind of generator must be nonreactive to avoid the danger of fire. Using heavier gases increases the amount of electrical energy generated.Which two elements on the table are most likely to be good choices for use as the gas in a thermoacoustic generator?
Answer:
Co2
Explanation:
List the elements mentioned from hydrogen to iron in the order of their fusing temperature.
Explanation:
H
Hydrogen
-259.14 -252.87 0.00008988 (gas, 273K)
2
He
Helium
-272.20 (under pressure) -268.934 0.0001785 (gas, 273K)
3
Li
Lithium
180.54 1347 0.534
4
Be
Beryllium
1278 2970 1.8477
5
B
Boron
2300 3658 2.34
6
C
Carbon
3527 4827
(sublimes) 2.260 (graphite)
3.513 (diamond)
7
N
Nitrogen
-209.86 -195.8 0.0012506 (gas, 273K)
8
O
Oxygen
-218.4 -182.96 0.001429 (gas, 273K)
9
F
Fluorine
-219.62 -188.14 0.001696 (gas, 273K)
10
Ne
Neon
-248.67 -246.05 0.00089994 (gas, 273K)
11
Na
Sodium
97.81 882.9 0.971
12
Mg
Magnesium
648.8 1090 1.738
13
Al
Aluminum
660.37 2467 2.698
14
Si
Silicon
1410 2355 2.329
15
P
Phosphorus
44.1 (white)
410 (red, under pressure) 280 (white) 1.82 (white)
16
S
Sulfur
113 (α)
119 (b)
106.8 (g) 444.67 2.070 (α)
1.957 (b)
17
Cl
Chlorine
-100.98 -33.97 0.003214 (gas, 273K)
18
Ar
Argon
-189.37 -185.86 0.001784 (gas, 273K)
19
K
Potassium
63.65 774 0.862
20
Ca
Calcium
839 1484 1.55
21
Sc
Scandium
1541 2831 2.989
22
Ti
Titanium
1660 3287 4.54
23
V
Vanadium
1887 3377 6.11 (292 K)
24
Cr
Chromium
1857 2672 7.19
25
Mn
Manganese
1244 1962 7.44
26
Fe
Iron
1535 2750 7.874
27
Co
Cobalt
1495 2870 8.90
28
Ni
Nickel
1453 2732 8.902 (298 K)
29
Cu
Copper
1083.4 2567 8.96
30
Zn
Zinc
419.58 907 7.133
31
Ga
Gallium
What best describes the motion of the medium particles in a longitudinal wave? The medium does not move. The medium moves in all directions. The medium vibrates as it moves in a circular path around the wave. The medium vibrates parallel to the direction of the wave.
In the motion of the medium particles in a longitudinal wave, the medium vibrates parallel to the direction of the wave.
What is a longitudinal wave?A longitudinal wave is a wave that is transversing along the length. When the displacement of medium and travel of wave is the same in that condition wave is known as the longitudinal wave.
It requires some medium to travel. A mechanical and sound wave is an example of a longitudinal wave.
Hence in the motion of the medium particles in a longitudinal wave, the medium vibrates parallel to the direction of the wave.
To learn more about the longitudinal wave refer to the link;
https://brainly.com/question/8497711
Answer:
d the medium vibrates parallel to the direction of the wave.
Explanation:
What is the period of a wave traveling with a speed of 20 m/s and the wavelength is 4.0 m?
Answer:
0.2s
Explanation:
wave formula
v=(lambda)f
20=(4)f
20÷4
=5Hz
1÷5
T=0.2s
The period of a wave travelling with a speed of 20 m/s and the wavelength is 4.0 m is 0.2 sec.
What is time period?
The length of time it takes a wave to complete one cycle is known as the wave's period. The frequency of the wave must be known in order to compute the wave period. The number of cycles a wave may complete in a period of time—typically one second—is its frequency.
wave formula
v = (lambda)f
20 = (4)f
20÷4
f = 5 Hz
T = 1/f
T = 1÷5
T = 0.2 sec
The period of a wave travelling with a speed of 20 m/s and the wavelength is 4.0 m is 0.2 sec.
To learn more about time refer to the link:
brainly.com/question/13764813
#SPJ2
Activity 1. Circuit Designer
DIRECTIONS: Draw the corresponding circuit diagram and symbols using the given
number of components. If the diagram is given identify its components.
Please answer this correctly thank you.
The circuit diagram is a representation of an electric system. It represents the components of the system with symbols. Drawings in the attached file.
What is a circuit diagram?The circuit diagram is an electrical circuit representation, including the sequence of electrical components or devices.
These diagrams make use of different symbols to represent the elements in the electrical circuit and make clear the connections to one another.
Some of the components composing the electrical circuits are
Single electric cell ⇒ It is represented with two perpendicular lines. The larger line indicates the positive terminal, and a shorter line represents the negative terminal.
The battery ⇒ combination of cells. Two or more cells together
NOTE: Some authors represent the battery as a single cell. You should draw your diagrams considering this. In my representations, I will consider a battery as two cells.
Switch ⇒ plug key that allows or stops the current flow. It is represented as two circles and a line between them. If it is open, it is a perpendicular line. If it is closed, it is a horizontal line.Wire ⇒ connection between devices. It is represented as a continuous line.
Bulb ⇒ devise that glows when connected to electricity. It might be represented as a cross in a circle.
The resistor ⇒ regulates the amount of energy provided by the source. It is represented as a zig-zag line or a rectangle.
The ammeter ⇒ measures the current. Represented with an A.
Voltmeter ⇒ It measures the voltage. Represented with a V.
In the attached files, you will find the representations and the components. Please remember that a single battery is represented as two single cells. Make changes in your drawings if necessary.
You can learn more about electrical circuits at
https://brainly.com/question/21075693
https://brainly.com/question/1916503
Where in their life cycle are stars on the main sequence?.
Answer ,,a main sequence stars burns through the hydrogen in it's core
Explanation:
When the stars go out
Eventually,reaching the end of its life cycle. At this point, it leaves the main sequence. Stars smaller than a quarter the mass of the sun collapse directly into white dwarfs
Extension Question
If the scale used to measure the mass of the unknown material maxes out at a
lower value than the actual mass of the material, then...
o the measured specific heat will be greater than the actual specific heat.
o the measured specific heat will be less than the actual specific heat.
The measured specific heat will be less than the actual specific heat if a lower value is gotten than the actual mass.
What is Specific heat capacity?This is defined as the quantity of heat needed to raise a substance's temperature by 1 degree Celsius.
If a substance has a low specific heat capacity , it loses water easily which makes the mass when measured to be smaller than the actual value.
Read more about Specific heat capacity here https://brainly.com/question/1401668
Why a surface that always have a perpendicular is an equipotential
What is the effect of increase in heat on:
1. Plastic
2. Iron
Explanation:
1.Plastic
Thermal Degradation – Plastic materials subjected to prolonged exposure to high temperatures will lose strength and toughness, becoming more prone to cracking, chipping, and breaking, at a rate in proportion to the temperature and time of exposure.
2.Iron
At room temperature, the iron atoms are in an unusual loosely packed open arrangement; as iron is heated past 912 degrees Celsius, the atoms become more closely packed before loosening again at 1,394 degrees Celsius and ultimately melting at 1,538 degrees Celsius
The Earth's biosphere is consists of
A(only the water on Earth that is in its solid form.
B(all of the Earth's water, including surface water, groundwater, snowcover, ice, and water in the atmosphere.
C(the part of the earth and its atmosphere in which living organisms exist or that is capable of supporting life.
D(the solid part of the earth consisting of the crust and outer mantle.
Answer:
The part of the earth and its atmosphere in which living organisms exist or that is capable of supporting life.
Explanation:
It’s in the definition of biosphere. “Bio” means “life,” so “biosphere” is that portion of the Earth capable of supporting life.
A circuit has a resistance of 2.5 N and is powered by a 12.0 V battery.
The current in the circuit, to the nearest tenth, is what ?
A 2.0-kilogram ball rolls down a ramp. if the ball accelerates at a rate of 12 m/s2, the net force causing the acceleration is:
a:6 newtons
b:10 newtons
c:12 newtons
d:24 newtons
Answer:
D
Explanation:
f = ma
2 x 12 = 24
answer could differ since it's rolling down a ramp. if an angle is given our approach differs.
After a massive-star supernova, what is left behind?.
Answer: A Nebula is left behind. A spectacular explosion in which a star ejects most of its mass in a violently expanding cloud of debris.
Hope this helps!
which thermometer one containing mercury or one containing alcohol, could be used in a polar region where the temperature reaches below -40 degrees?
What happens to the water vapor in the air when the air temperature cools?
Answer:
it becomes a liquid. it becomes water
If two forces act on an object, what is the relationship between the two forces? (pls explain)
A. The larger force causes the same acceleration as the smaller.
B. The larger force causes more acceleration than the smaller.
C. The larger force causes less acceleration than the smaller.
D. The smaller force and the larger force are balanced and therefore causes no acceleration.
Answer:
B. The larger force causes more acceleration than the smaller.
Explanation:
For example, let me use a child and a grown up. The child represents the smaller force while the grown up represents the larger force. If they are pushing the same object of different sides, obviously the side with the grown up will push and move to the side of the child because it is stronger.
easy one here pls help thanks so much
name one type of energy the washing machine wastes when spinning the clothes
Answer:
Electrical Energy
The Electricity Rotates the spinning part of Washing machine and It spinns clothes.
When energy is added to a wave, how can the wave change?.
Answer:
When waves overlap in-phase (crest meets crest or trough meets trough) the waves energy is additive and the amplitude increases.
Explanation:
When waves overlap out-of-phase (crest meets trough) the waves cancel and the amplitude (energy) decreases. When two interfering waves cancel each other out.
If the body temperature of a person is recorded as 37°C, what is the person’s body temperature in K? Round your answer to the nearest whole number.If the body temperature of a person is recorded as 37°C, what is the person’s body temperature in K? Round your answer to the nearest whole number.
Melissa's hair stands up on end after she takes her wool hat off in the winter but not in the summer
Answer:
Static electricity
Explanation:
A static reaction is transpiring with the surrounding air as well as her hair.