PLEASE SAVE ME FROM THIS PHYSICS QUESTION (WILL MARK BRAINLIEST)
A 21 kg child is riding a 5.9 kg bike with a velocity of 4.5 m/s to the northwest.
- What is the total momentum of the child and the bike together?
- What is the momentum of the child?
- What is the momentum of the bike?

Answers

Answer 1

Answer:

See Below

Explanation:

Mass of child = 21 kg

Mass of bicycle = 5.9 kg

Total mass = 22 + 5.9 = 27.9 kg

Velocity = 4.5 m/s

1) Total momentum of the child and the bike together

= Total mass * Velocity

= 27.9*4.5

= 125.55 kg m per second

2) Momentum of the child

= Mass of child*Velocity

= 21*5.9

= 123.9 kg m per second

3) Momentum of the bike

= Mass of bike*Velocity

= 5.9*4.5

= 26.55 kg m per second


Related Questions

cornvet 500000grams in short form of using suitable prefix.​

Answers

Answer:

0.5 mega grams

Explanation:

Ways in which a teacher plays a role in the literacy development of the learners​

Answers

Answer:

encourage all attempts at reading, writing, and speaking

Explanation:

A wire is attached to the ceiling so that the current flows south to north. A student is standing directly below the wire facing north. What is the direction of the B-field (caused by the current in the wire) at this observation point

Answers

Answer:

If one wraps the fingers around the wire and points the thumb in the direction of the "conventional" current the fingers will point towards the North pole - the direction of the B-field.

In this case the B-field is pointed "West".

You are riding a bicycle up a gentle hill. It is fairly easy to increase your potential
energy, but to increase your kinetic energy would be harder.
True or false

Answers

True or false: while riding a bicycle up a gentle hill, it fairly easy to increase your potential energy, but to increase your kinetic energy would ...

Find out the three methods of energy transfer (conduction, convection and radiation). think about
2 situations of daily life where you know or think you know that each one applies

Answers

Explanation:

conduction- putting a metal spoon in fire

convection- boiling water. In ventilation

Radiation- suns heat reaches us by radiation. heat from fire place reaches us by radiation.

If a 40 N block is resting on a rough horizontal table with a
coefficient of static friction p=0.60, then what is the force of
static friction acting on the block?

Answers

Based in the relationship between static frictional force and coefficient of static friction, the force of static friction is 24 N.

What is friction?

Friction is a force that opposes the relative motion of an object moving over another at their surafce of contact.

Frictional force is constant for each type of material. This constant is known as coefficient of friction.

The coefficient of friction is given as follows:

Coefficient of friction = Frictional force/normal reaction

From the data given:

coefficient of static friction p = 0.60Weight of block = 40 N

Force of static friction = 0.60 × 40

Force of static friction = 24 N.

Therefore, the force of static friction is 24 N.

Learn more about static friction at: https://brainly.com/question/11361910

Read the text below. Each sentence is about one, two or no energy at all. (5 points) Name the type (s) of energy for each sentence, or leave the space blank (if in the sentence no energy is mentioned). Artan decided to paint the house. He moved the furniture, climbed the stairs, and began work. After two hours he took a break, ate lunch and turned on the radio to listen to some music. When done, turn on a heater to allow the paint to dry as quickly as possible. At dinner everything had ended. a) ............................................................................................................................................ b) ............................................................................................................................................ c) ............................................................................................................................................ d) ............................................................................................................................................     e) ............................................................................................................................................​

Answers

Yellow orange green green bowls green orange green bowls orange orange juice

A professional golfer swings a golf club, striking a golf ball that has a mass of 55.0 g. The club is in contact with the ball for only 0.00410 s. After the collision, the ball leaves the club at a speed of 32.0 m/s. What is the magnitude of the average force (in N) exerted on the ball by the club?

Answers

The magnitude of the average force exerted on the ball by the club is 429.27 N.

What is force?

Force can be defined as the product of mass and acceleration

To calculate the force exerted on the ball by the club, we use the formula below.

Formula:

F = m(v-u)/t............ Equation 1

Where:

F = Force exerted on the ballm = mass of the ballv = Final velocityu = initial velocityt = time

From the question,

Given:

m = 55 g = 0.055 kgu = 0 m/sv = 32 m/st = 0.0041 s

Substitute these values into equation 1

F = 0.055(32-0)/0.0041F = 429.27 N

Hence, The magnitude of the average force exerted on the ball by the club is 429.27 N.

Learn more about force here: https://brainly.com/question/18762601

A school bus and a small Toyota Prius collide in a head-on collision
Which vehicle pushed with a greater force? Explain
Which vehicle has a greater mass?
Which vehicle has a greater acceleration after the moment of impact? Explain why

Answers

Hi there!

Part 1:

According to Newton's Third Law, every action has an EQUAL and OPPOSITE reaction.

For a collision, the objects involved exert an EQUAL and OPPOSITE impulse on each other, which means the forces exerted are equal as well.

Therefore, the school bus and Toyota Prius exert an EQUAL FORCE on each other.

Part 2:
The school bus has a greater mass.

Part 3:

Using Newton's Second Law:
[tex]\Sigma F = ma[/tex]

Using this relationship, the smaller the mass, the larger the acceleration. Since the forces are EQUAL, the Toyota Prius will experience a larger acceleration because it has a smaller mass.

The force of a hammer drives a nail into wood. This is an example of?
A. An unbalanced force.
B. Gravitational force.
C. Friction.
D. Balanced forces.

Answers

Answer:

A. An unbalanced force.

Explanation:

There needs to be a net force in order for the nail to be driven into presumably the wall. Without the net force then the hammer and nail wouldn't move.

A curve is banked at an angle of 29.1 degrees above the horizontal and the road surface has a coefficient of static friction of 0.4. What must the radius of curvature be for the safe minimum speed of 27.1 m/s?

Answers

Hi there!

We can begin by summing the forces acting on the car.

Along the axis of the incline, the forces of friction and gravity are working. The force of friction points towards the top of the ramp, while the force of gravity works towards the bottom.

We can use trigonometry to determine the force due to gravity along the ramp.

[tex]F_g = Mg sin\theta[/tex]

The force due to friction is equal to:
[tex]F_f = \mu N[/tex]

The normal force is the vertical component of the force due to gravity, so:
[tex]F_f = \mu Mgcos\theta[/tex]

Now, the combination of these two forces produces a component of the centripetal force. Drawing a diagram, we see that the true centripetal force is the HYPOTENUSE, while these forces sum up to its horizontal component along the ramp.

Therefore:
[tex]F_c sin\theta = Mgsin\theta - \mu Mgcos\theta[/tex]

The centripetal force is equivalent to:
[tex]F_c = \frac{Mv^2}{r}[/tex]

m = mass (kg)

v = velocity (m/s)
r = radius (m)

Rewrite:
[tex]\frac{Mv^2}{r}sin\theta = Mgsin\theta - \mu Mgcos\theta[/tex]

Cancel out 'M'.

[tex]\frac{v^2}{r}sin\theta = gsin\theta - \mu gcos\theta[/tex]

Rearrange to solve for 'r'.

[tex]r = \frac{v^2sin\theta}{gsin\theta - \mu gcos\theta}[/tex]

Plug in values and solve.
[tex]r = \frac{(27.1^2)sin(29.1)}{(9.8)sin(29.1) - 0.4(9.8)cos(29.1)} = \boxed{266.365 m}[/tex]

1. What is the distance covered by a T-Rex that goes from 0 m/s to 9 m/s in 6.78 seconds? (10
points)

Answers

With the use of first and third equation of motion, the distance covered by a T-Rex is 30.51 m

Linear Motion

When a body is in linear motion, the body is moving in a straight line. some of the parameters to consider are:

Distance coveredSpeedVelocityAccelerationE.T.C

Given that a T-Rex move from 0 m/s to 9 m/s in 6.78 seconds, the distance covered can be found by calculating the acceleration.

Let us use equation 1

V = U + at

9 = 0 + 6.78a

a = 9 / 6.78

a = 1.33 m/[tex]s^{2}[/tex]

Now let us use equation 3

[tex]v^{2}[/tex] = [tex]u^{2}[/tex] + 2as

[tex]9^{2}[/tex] = 2 x 1.33 x S

81 = 2.655S

S = 81/2.655

S = 30.51 m

Therefore, the distance covered by a T-Rex is 30.51 m.

Learn more about Linear Motion here: https://brainly.com/question/12721831

How can an athlete participating in a 40m sprint modify and improve their performance based on the kinematic variable of speed and acceleration?

Answers

The athlete can improve performance by building strength, coordination and balance.

Who is an Athlete?

This is an individual who is proficient in sports and other forms of physical exercise.

Improvement of performance based on the kinematic variable of speed and acceleration can be achieved by building strength, coordination and balance by performing plyometric exercises etc.

Read more about Athlete here https://brainly.com/question/1532968

Need help with the following - question 2

Answers

Answer:

Find the change in momentum of the upper stage, that is:

∆p = m(vf - vi)

m being the mass of the upper stage

vf being the final velocity which was given

vi being the initial which was also given

find ∆p

then use ∆p in the same equation

∆p being the answer you got above

m being the mass of the lower stage (given)

vi being the initial velocity (given)

vf being the final velocity of the lower stage which you were asked to find

Explanation:

During a collision the change in momentum (∆p) for both objects is equal regardless of their speeds or masses before or after the equation

The weight of an object on the moon is less because the _______ on the moon is less.
A. mass
B. kilogram
C. newton
D. acceleration of gravity
E. weight

Answers

Answer:

acceleration of the gravity

Explanation:

The weight of an object on the moon is less because the acceleration of the gravity on the moon is less.

define capacitance of a capacitor and state its SIbunit​

Answers

Answer: what I know that the unit is farad

Explanation:

can somebody please help

Answers

The amplitude of the wave on the given sinusoidal wave graph is 10 cm.

What is amplitude of wave?

The amplitude of a wave is the maximum displacement of a wave. This is the highest vertical position of the wave from the origin.

Amplitude of the wave is calculated as follows;

From the graph, the amplitude of the wave or maximum displacement of the wave is 10 cm.

Thus, the amplitude of the wave on the given sinusoidal wave graph is 10 cm.

Learn more about wave amplitude here: https://brainly.com/question/25699025

To travel at a constant speed, a car engine provides 24 KW of useful power. The driving force on the car is 600 N. At what speed does it travel?

Answers

[tex]\text{Given that,}\\ \\\text{Power,} ~P=24~ KW = 24000~ W\\\\\text{Force,} ~F=600~N\\\\\text{We know that,}\\\\P=Fv\\\\\implies v = \dfrac{P}{F} = \dfrac{24000}{600}=40~ ms^{-1}\\\\\\\text{It travels at 40 m/s}[/tex]

A train moves from rest to a speed of 22 m/s in 34.0 seconds. What is its acceleration?

Answers

Answer: a = 0.647 m/s^2

Explanation:

Acceleration = change in speed / time → a = 22 / 34 → a = .647 m/s^2

There are two space ships traveling next to each other. The first one is 500
Kg and the second one is 498 Kg. Since they are 35 meters apart, what is
the force of gravity between the two space ships?

Answers

This question involves the concept of  Newton's law of gravitation.

The force of gravity between the two spaceships is "1355.78 N".

Newton's Law Of Gravitation

According to Newton's Law of Gravitation:

[tex]F=\frac{Gm_1m_2}{r^2}[/tex]

where,

F = force of gravity between ships = ?G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²m₁ = mass of first ship = 500 kgm₂ = mass of second ship = 498 kgr = distance between ships = 35 m

Therefore,

[tex]F=\frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(500\ kg)(498\ kg)}{(35\ m)^2}\\\\[/tex]

F = 1355.78 N = 1.356 KN

Learn more about Newton's Law of Gravitation here:

https://brainly.com/question/9373839

Two space ships traveling next to each other. The first one is 500 kg and the second one is 498 kg. They are 35 meters apart, the Force of gravity between the two spaceships is 1355.78 N.

It is given that the First spaceship's weight ([tex]m_{1}[/tex]) is 500 kg,

The second spaceship's weight ([tex]\rm m_{2}[/tex]) is 498 kg.

The distance between spaceships (r) is 35 meters.

It is required to find the Force of gravity between these spaceships.

What is Gravitational force?

It is defined as the force which attracts any two masses in the universe.

By Newton's law of Gravitation:

[tex]\rm F= \frac{Gm_1m_2}{r^2}[/tex]  , Where

[tex]\rm F = The\ force \ of \ gravity \ between \ the \ spaceships\\\rm G= Universal\ Gravitational \ Constant = 6.67 \times 10^{-11} N.m^2/kg^2[/tex]

Putting values in the above formula:

[tex]\rm F = \frac{(6.67\times 10^{-11} N.m^2/kg^2)(500kg)(498kg)}{(35m)^2}[/tex]

F = 1355.78 N = 1.356  KN

Thus, Two spaceships travel next to each other. The first one is 500 kg and the second one is 498 kg. They are 35 meters apart, the Force of gravity between the two spaceships is 1355.78 N.

Learn more about Gravitational Force here:

https://brainly.com/question/3009841


At an altitude of 1.3x10^7 m above the surface of the earth an incoming meteor mass of 1x10^6 kg has a speed of 6.5x10^3 m/s. What would be the speed just before impact with the surface of earth?Ignore air resistance.


Show all steps.

Answers

Answer:

Approximately [tex]1.1 \times 10^{4}\; {\rm m\cdot s^{-1}}[/tex] if air friction is negligible.

Explanation:

Let [tex]G[/tex] denote the gravitational cosntant. Let [tex]M[/tex] denote the mass of the earth. Lookup the value of both values: [tex]G \approx 6.67 \times 10^{-11}\; {\rm N\cdot m^{2}\cdot kg^{-2}}[/tex] while [tex]M \approx 5.697 \times 10^{24}\; {\rm kg}[/tex].

Let [tex]m[/tex] denote the mass of the meteor.

Let [tex]v_{0}[/tex] denote the initial velocity of the meteor. Let [tex]r_{0}[/tex] denote the initial distance between the meteor and the center of the earth.

Let [tex]r_{1}[/tex] denote the distance between the meteor and the center of the earth just before the meteor lands.

Let [tex]v_{1}[/tex] denote the velocity of the meteor just before landing.

The radius of planet earth is approximately [tex]6.371 \times 10^{6}\; {\rm m}[/tex]. Therefore:

At an altitude of [tex]1.3 \times 10^{7}\; {\rm m}[/tex] about the surface of the earth, the meteor would be approximately [tex]r_{0} \approx 6.371 \times 10^{6}\; {\rm m} + 1.3 \times 10^{7}\; {\rm m} \approx 1.9 \times 10^{7}\; {\rm m}[/tex] away from the surface of planet earth. The meteor would be only [tex]r_{1} \approx 6.371 \times 10^{6}\; {\rm m}[/tex] away from the center of planet earth just before landing.

Note the significant difference between the two distances. Thus, the gravitational field strength (and hence acceleration of the meteor) would likely have changed significant during the descent. Thus, SUVAT equations would not be appropriate.

During the descent, gravitational potential energy ([tex]\text{GPE}[/tex]) of the meteor was turned into the kinetic energy ([tex]\text{KE}[/tex]) of the meteor. Make use of conservation of energy to find the velocity of the meteor just before landing.

Initial [tex]\text{KE}[/tex] of the meteor:

[tex]\displaystyle (\text{Initial KE}) = \frac{1}{2}\, m\, {v_{0}}^{2}[/tex].

Initial [tex]\text{GPE}[/tex] of the meteor:

[tex]\displaystyle (\text{Initial GPE}) &= -\frac{G\, M\, m}{r_{0}}[/tex].

(Note the negative sign in front of the fraction.)

Just before landing, the [tex]\text{KE}[/tex] and the [tex]\text{GPE}[/tex] of this meteor would be:

[tex]\displaystyle (\text{Final KE}) = \frac{1}{2}\, m\, {v_{1}}^{2}[/tex].

[tex]\displaystyle (\text{Final GPE}) &= -\frac{G\, M\, m}{r_{1}}[/tex].
If the air friction on this meteor is negligible, then by the conservation of mechanical energy:

[tex]\begin{aligned}& (\text{Initial KE}) + (\text{Initial GPE}) \\ =\; & (\text{Final KE}) + (\text{Final GPE})\end{aligned}[/tex].

[tex]\begin{aligned}& \frac{1}{2}\, m\, {v_{0}}^{2} - \frac{G\, M\, m}{r_{0}} \\ =\; & \frac{1}{2}\, m\, {v_{1}}^{2} - \frac{G\, M\, m}{r_{1}}\end{aligned}[/tex].

Rearrange and solve for [tex]v_{1}[/tex], the velocity of the meteor just before landing:

[tex]\begin{aligned}{v_{1}} &= \sqrt{\frac{\displaystyle \frac{1}{2}\, m\, {v_{0}}^{2} - \frac{G\, M\, m}{r_{0}} + \frac{G\, M\, m}{r_{1}}}{(1/2)\, m}} \\ &= \sqrt{{v_{0}}^{2} - \frac{G\, M}{r_{0}} + \frac{G\, M}{r_{1}}} \\ &= \sqrt{{v_{0}}^{2} - G\, M\, \left(\frac{1}{r_{1}} - \frac{1}{r_{0}}\right)}\end{aligned}[/tex].

Substitute in the values and evaluate:

[tex]\begin{aligned}v_{1} &= \sqrt{{v_{0}}^{2} - G\, M\, \left(\frac{1}{r_{1}} - \frac{1}{r_{0}}\right)} \\ &\approx \sqrt{\begin{aligned}(& 6.5 \times 10^{3}\; {\rm m \cdot s^{-1}}) \\ & - [6.67 \times 10^{-11}\; {\rm N \cdot {m}^{2}\cdot {kg}^{2} \times 5.697\; {\rm kg}}\\ &\quad\quad \times (1 / (6.371 \times 10^{6}\; {\rm m}) - 1 / (1.9371 \times 10^{7}\; {\rm m}))]\end{aligned}} \\ &\approx 1.1 \times 10^{4}\; {\rm m\cdot {s}^{-1}}\end{aligned}[/tex].

(Note that assuming a constant acceleration of [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex] would give [tex]v_{1} \approx 1.7\times 10^{4}\; {\rm m\cdot s^{-1}}[/tex], an inaccurate approximation.

How fast must a proton move so that its kinetic energy is 70% of its total
energy?

I thought it would be 0.7c but that is wrong. I really don't know how to do this type of problem and my text book isn't any help.

Answers

Try this solution, all the details are in the attachment. note, the answer is marked with orange colour. If it is possible, check the provided solution in other sources.

Answer: ≈0.81c.

As a block falls through the air by 40 meter it does work equal to -1800 joule. Determine the mass of a block.

Answers

Answer:

m = 4.5 kg

Explanation:

w = - 1800 j

Fd = - 1800 j

mgd = - 1800 j

m = - 1800 ÷(gd)

m = - 1800 ÷( 10×-40)

m = 4.5 kg

An object of mass m is oscillating with a period T. The position x of the object as a function of time is given by the equation x(t)=Acosωt . The maximum net force exerted on the object while it is oscillating has a magnitude F. Which of the following expressions is correct for the maximum speed of the object during its motion?

Answers

What the equation given?

x(t)=Acos[tex]\omega[/tex]t

Maximum velocity occurs at the equilibrium position

So

x=0

Now

x(0)=Acos0[/tex]x(0)=A

Now

As we know the formula

[tex]\\ \rm\rightarrowtail V_max=A\omega[/tex]

These expressions can be used

The maximum speed of the oscillating object will be given by [tex]V_{max}=Aw[/tex]

What is oscillation?

An oscillation is defined as the repitative periodic motion of any object about its mean or equilibrium position.

The given equation is as follows:

x(t)=Acost

Maximum velocity occurs at the equilibrium position x=0

x(0)=Acos0

x(0)=A

Hence the maximum velocity will be  [tex]V_{max}=Aw[/tex]

To know more about Oscillation follow

https://brainly.com/question/26449711

A grasshopper jumps at a 63.0 angle with an initial velocity of 4.22 m/s. how far away does it land

Answers

The grasshopper is 1.47 m far away from the point where it jumps to the point where its lands.

To calculate the distance of the landing point of the grasshopper to the point where its jumps, we use the formula of range.

What is horizontal range?

Range can be defined as the horizontal distance between the point of projection to the point where the projectile hit the plain again.

R = u²sin2∅/g........... Equation 1

Where:

R = Distance between the point of jump and the point at which it landsu = initial velocity∅ = angleg = acceleration due to gravity

From the question,

Given:

u = 4.22 m/s∅ = 63°g = 9.8 m/s²

Substitute these values into equation 1

R = (4.22)²sin(2×63)/9.8R = 1.47 m

Hence, The grasshopper is 1.47 m far away from the point where it jumps to the point where its lands.

Learn more about horizontal range here : https://brainly.com/question/12870645

Read the materials on Biomolecules. Summarize and creatively translate them into a poem describing
what you have learned about biomolecules write your answer

Answers

Biomolecules are fundamental for life. They required both energy supply and building structures.

What are biomolecules?

Biomolecules are organic molecules that fundamental for life and must be ingested from the regular diet.

Biomolecules include proteins (e.g., meal proteins), lipids (fats) and also carbohydrates (e.g., glucose).

Biomolecules required both energy supply (e.g., glucose) and building structures (e.g., amino acids in proteins).

Learn more about biomolecules here:

https://brainly.com/question/10904629

static frictional Force​

Answers

Answer:

The static frictional force is the force between the magnetic forces statically and contains only two objects during this physical reaction. It results in electricity and a slight shock.

The resultant of two vectors is of magnitude 3 units and 4 units is 1 units, what is the value of their dot product? ​

Answers

Answer:

A dot B = C     is the vector equation for this expression

A · B = A B cos θ

3 * 4 cos θ = 1       the value 1 is their dot product

cos θ = 1 / 12 = .083       θ = 85.2 deg

The amount of energy released when 45 g of -175° C steam is cooled to 90° C is


A. 101,700 J


B. 317,781 J


C. 419,481 J


D. 417,600 J

Answers

Answer:

The answer should be choice B.

What is the x component of a vector that is defined as
45m at -35°?

Answers

the x- component of the vector is 36.86 m.

What is a vector?

Vectors are quantities that have both magnitude and direcion

To calculate the x-component of the vector, we use the formula below.

Formula:

dx = dcosθ.......... Equation 1

Where;

dx = x-component of the vectord = vector between the x-y componentθ = Angle of the vector to the horizontal.

From the question,

Given:

d = 45 mθ = -35°

Substitute these values into equation 1

dx = 45cos(-35°)dx = 45×0.918dx = 36.86 m.

Hence, the x- component of the vector is 36.86 m.

Learn more about vector here: https://brainly.com/question/25705666

Other Questions
Which of the following was the first public movement in which American women took leadership roles ?the abolition movementthe temperance movement the suffrage movementthe property rights movementIts B on edge the temperance movement Bobby's cat runs x mph. Bobby's dog runs twice as fast as his cat.If cat and dog start running away from each other how far away from each other will they be after 30 minutes? fasttt please 6,132 10 = Anthony is preparing for a group discussion about how a speaker uses rhetorical appeals in a speech.Which question would be most appropriate for the discussion?Where is the speakers hometown?What is the speakers purpose?Where did the speaker give the speech? What other speeches has the speaker given? three boxes under my stairs contain apples or pears are both each box contains the same number of pieces of fruit the first box contains all 12 of the apples and 1 /9th of the pears how much of the fruit are there in each box is the Divine Right of Kings a true belief of the people or not Answering the opposition is an important component in persuasive nonfiction. Why is it important to do this? Please give an example of how you might answer the opposition in a persuasive paper about why you should homeschool your kids. What group of people does"obsolete nations" and "oldnations" refer to?A)White settlersB)Native AmericansC)Europeans The ratio of offensive to defensive players on a football team is 4 to 3. If there are 52 offensive players on the team, how many defensive players are there? Comparative embryology: (Select 4 Responses) A Explores how the embryo develops B Illustrates the lack of a human tail during development C Explains how animals have a common ancestor D Supports the theory of evolution E Shows the missing gill slits in salamanders during development F Discusses how vertebrates develop similarly how bridges are built over water 4Select the correct answer from each drop-down menu.Complete the following paragraph about environmental laws and conditions in the 1970s.One of the first environmental legislative acts passed by a bipartisan Congress signed into law by Richard Nixon in 1970 was the __________, which required government agencies to conduct environmental Impact studies for building projects.The decade ended with a hazardous chemical incident at ______. NO LINKS PLEASE I NEED THEM TODAY NO LINKS!!! a) what is average rate of change of f(x) over the interval from x=5 to x=9? (table shows values of f(x). graph shows function of g(x).) table:x: 4, 5, 6, 7, 8, 9, 10F(x): -8, -4, 8, 10, 11, 14 ,18b) Find the average rate of change of g(x) over the interval from x = 0.25 to x= 1. (Write answer as a simplified fraction. Show work)c) if g(x) represents the height of a ball that was throw. up into the air, interpret your answer from part b) in terms of the real-world it represents. PLEASE HELP ASAP Here is the question afterward: use the distributive property to rewrite the expression 6(10+n)= Write a sentence to represent the solution set in the context of the problem.___________________________________________________________920 = 560 + 60(x) He has to make at least 6 sales to get $920 15)When using the words _____ and _____ in question format, they need accent marks.que, esquiere, estaque, comocomo, quiere [ASAP!] Which of these can be a problem for people with accessibility issues? Select 4 options.1. using all uppercase text 2. using left-aligned text3. putting two spaces after a period4. flashing images5. using an image instead of text When would you use a block quote as evidence in an interpretive essay on a novel?A. when you want a to include a couple of words from a secondary source to support your argumentB. when you want a longer quotation from the text to support an argument in your essayC. when you want to integrate parts of a quotation into a statement with your own ideas