a. When a football is kicked and it moves from one location to another, it indicates that unbalanced troops are responding to it and b. If an object A applies a force to another object B, then the other object B.
Describe how the effects of balanced and unbalanced forces on motion:The equilibrium of the forces is disturbed when an object's motion changes. Forces with opposite directions and equal sizes are said to be balanced forces. Motion remains constant when the forces are equal. In one of your scenarios from the previous section, you used the same amount of force on an object but pushed or pulled it in the opposite direction.
To know more about Newton's third law visit:
brainly.com/question/29768600
#SPJ1
Compared to using analog signals, what is an advantage of transmitting
information using digital signals?
A. Digital signals become stronger as the distance from their source
increases.
B. Digital signals are more secure.
C. Digital signals have a continuous range of values.
D. Digital signals can use the cloud to store and access data.
Answer:
B. Digital signals are more secure
Explanation:
You want to know an advantage of transmitting information using digital signals.
Digital signalsDigital signals are characterized by having a few discrete states. In the simplest case, those states are {transmitting, not transmitting}. Modern digital signals are often transmitted using numerous combinations of phases, frequencies, and amplitudes.
Analog signalsAnalog signals are characterized by a continuum of the characteristic used to convey the information. When amplitude modulation is used, the information of interest is conveyed by the amplitude of the signal. Similarly, when frequency or phase modulation is used, the information is conveyed by the frequency or phase of the signal, respectively.
That is, analog signals have a continuous range of values.
DistanceAny signal that is broadcast will have a signal level that decreases with distance from the source of the broadcast. Any signal conveyed through a medium will be subjected to distortions and losses due to the interaction of the signal and the medium. Hence all signals become weaker as the distance from the source increases.
NoiseThe receiver of a signal will, in general, receive signals other than the one intended. These are referred to as "noise." A transmission channel may have many sources of noise, including other transmitters, Cosmic Background Radiation, thermal noise in the components of the receiver or transmission medium, and others.
For analog signals, noise can directly affect the amplitude or phase being used to represent the signal of interest. Hence it changes the received value so it is not the same as the transmitted value.
The states of digital signals are designed to be sufficiently far apart that any corruption by noise will not affect the value as interpreted by the receiver. Thus, in terms of corruption of the information, we can say digital signals are more secure.
__
Additional comment
In radio transmission, noise is generally an addition to the signal. The weaker the analog signal, the greater the effect of noise. Broadcast radio began as AM radio: amplitude modulated. As the signal weakens, noise becomes a greater portion of the amplitude, so the receiver hears "static" where they want to hear voice or music.
FM, frequency modulated, radio replaced AM radio in order to avoid this issue with noise. The frequency of a signal is less likely to be corrupted. However, as the signal weakens, it can be difficult to determine its frequency, so that method of analog transmission also succumbs to noise.
Digital transmission in a noisy channel can also be corrupted by noise. Ultimately, the rate of information transmission in a given channel depends on the channel bandwidth and the signal-to-noise ratio. The integrity of a signal can be improved through coding that allows missing or corrupted bits of information to be determined based on the other bits that are received.
"Security" of a transmission can have different meanings. Here, we understand it to refer to the integrity of the information being conveyed. It could also relate to the difficulty of intercepting the transmission, or the difficulty of understanding the meaning of the received signal. Digital signals may or may not be more "secure" in these other meanings of the word.
K
The formula B=29a is used to estimate the minimum furnace output, B, in BTUs, for a modern house with the amount of square feet of flooring, a. Determine the minimum furnace
output for a 1600-ft² modern house.
The minimum furnace output for a 1600-ft² modern house is
BTUS.
Aww
The minimum furnace output for a 1600-ft² modern house is 464000 BTUs.
What is BTU?British thermal units (Btu) are a unit used to measure the amount of heat in fuels or other energy sources. The amount of heat needed to raise a pound of liquid water's temperature by one degree Fahrenheit at the point where water has its highest density (approximately 39 degrees Fahrenheit).
The formula: the minimum furnace output, B = 29 a.
Area of modern house = 1600 ft²
The minimum furnace output = 29×16000 BTUs
= 464000 BTUs.
Hence, the minimum furnace output for a 1600-ft² modern house is 464000 BTUs.
Learn more about BTUs here:
https://brainly.com/question/8118559
#SPJ1
The momentum of an object is determined to be 7.2×10-3 kg⋅m/s. Express this quantity as provided or use any equivalent unit. (Note: 1 kg = 1000 g
The mass of the moving item is referred to as momentum. There is magnitude and direction to momentum. The object has a momentum of 7.2 g-m/s.
What is the momentum of an object?Momentum is a vector quantity that is created during motion by an object's mass and velocity. Thus, momentum will be expressed in units of kg-m/s.
Considering that item has motion. Likewise, 1 kilogram equals 1000 g. Therefore, the momentum will transform into units of grams when we enter the value of 1 kg.
Momentum = 7.2 x 10⁻³ 1000g-m/s
Momentum = 7.2 g-m/s.
Thus, we may deduce that the object's momentum, measured in grams per second, is 7.2 g-m/s.
Learn more about momentum, here:
https://brainly.com/question/24030570
#SPJ1
Q.2. Assertion: When distance between two bodies is doubled and also mass of each body is doubled. then the gravitational force between them remains the same. Reason: According to Newton's law of gravitation, force is directly proportional to the product of mass of the two bodies and inversely proportional to square of the distance between them. ent to
Answer:
True:
F1 = G M1 M2 / R^2
F2 = G (2 M1) * (2 M2) / (2 R)^2
F1 = F2
4. How many excess electrons does a balloon that was rubbed on a child's hair and
now has a charge of 4.0 x 107 Coulombs?
A student pours a spoonful of dirt into a cup of water. The water and dirt are stirred together. The water turns a light brown color. Some dark pieces float to the top of the cup and another dark layer forms on the bottom of the cup. Which statement BEST describes the contents of the cup?
The statement that is correct is that the contents of the cup form a mixture.
What is the nature of the cup?Though the question is incomplete but I would try to give you a good explanation as much as I can. We must recall that when we talk about a mixture, we have to note that the term mixture would refer to the combination of two or more substances that do not chemically react together.
In this case, we have been told that we have a water that was pure and then we add dirt to it. It is clear that the water and the dirt do not react in any way hence what we have formed is a mixture.
Learn more about mixtures:https://brainly.com/question/24898889
#SPJ1
describe wht happends to the motion of the moving object when there is no resultant force acting on it
Answer:
it keeps moving until a force disturbs it
Explanation:
The four conducting cylinders shown in the figure are all made of the same material, though they differ in length and/or diameter. They are connected to four different batteries, which supply the necessary voltages to give the circuits the same current, I.
Rank the four voltages. V₁, V₂, V₃, and V₄. in order of decreasing value. Rank from largest to smallest. To rank items as equivalent, overlap them.
This content in not available an your mobile device, but your work is still incomplete. Please use a different device to submit your solution for grading
The ranking of the voltages, V₁, V₂, V₃, and V₄ in the order of decreasing voltage value is; V₂ > V₃ > V₁ > V₄
What is the voltage of an electric circuit?A voltage is the difference in potential or pressure that pushes or causes the flow of electric current in a circuit or conducting loop.
The current flowing through the circuit can be found using the following formula;
[tex]I=\dfrac{V}{R}[/tex]
The formula for conductivity is presented as follows;
[tex]\sigma =\dfrac{l}{R\times A}[/tex]
Where;
σ = The conductivity of the material
l = The length
R = The resistance to electricity
A = The cross-sectional area of the conductor
Therefore;
[tex]R=\dfrac{V}{I}[/tex]
[tex]R=\dfrac{l}{A\times \sigma}[/tex]
[tex]\dfrac{V}{I} =\dfrac{l}{A\times \sigma}[/tex]
[tex]V=\dfrac{l \times I}{A\times \sigma}[/tex]
Based on the dimensions of the cylinders, obtained from a similar question, we get;
[tex]V_1=\dfrac{3\cdot L \times I}{\pi \cdot D^2\times \sigma} = 3\times \dfrac{ L \times I}{\pi \cdot D^2\times \sigma}[/tex]
[tex]V_2= \dfrac{2\cdot L \times I}{\pi \cdot \dfrac{D^2}{4} \times \sigma} = \dfrac{8\cdot L \times I}{\pi \cdot D^2\times \sigma} = 8\times \dfrac{ L \times I}{\pi \cdot D^2\times \sigma}[/tex]
[tex]V_3=\dfrac{L \times I}{\pi \cdot \dfrac{D^2}{4} \times \sigma} =\dfrac{4\cdot L \times I}{\pi \cdot D^2\times \sigma}= 4\times \dfrac{L \times I}{\pi \cdot D^2\times \sigma}[/tex]
[tex]V_4=\dfrac{L \times I}{\pi \cdot D^2\times \sigma} = 1\times \dfrac{ L \times I}{\pi \cdot D^2\times \sigma}[/tex]
Therefore;
V₁ = 3·V₄
V₂ = 8·V₄
V₃ = 4·V₄
The rank of the voltages in the order of decreasing value is therefore;
V₂ > V₃ > V₁ > V₄Learn more on the conductivity of a material here: https://brainly.com/question/2507300
#SPJ1
Determine the parallel and perpendicular components of the force of gravity for a 369 N object on a 28.4 degree incline
The parallel component of the force of gravity is the net force. The perpendicular component of the force of gravity is directed opposite the normal force and as such balances the normal force.
What is the perpendicular component of the force of gravity?In order to balance the normal force, the perpendicular component of gravity is pointed in the opposite direction. No other force can counteract the parallel component of the gravitational force.
What is the parallel component of the force of gravity?The presence of an imbalanced force will then cause the object to accelerate downward along the inclined plane. This acceleration is brought on by the parallel part of the gravitational force. The net force is a parallel part of the gravitational force.
Steps for Calculating the Force of Gravity on an Object Falling from an Inclined Plane: Determine the inclined plane's angle in the first step.Determine the object's mass on the inclined plane in step two.Determine and compute the gravitational force acting on the item.Determine and compute the parallel and perpendicular forces acting on the object.Formulas to Calculate the Force of Gravity on an Object Falling Down an Inclined Plane using Vocabularyincline plane: a wedged angle.Force of Gravitation the downward-moving gravitational force.Force that is parallel to the inclined plane's face is referred to as the perpendicular force.The force that is parallel to the inclined plane's face is known as the parallel force.Equation for Gravitational Force: The gravitational force is equal to the product of an object's mass and its gravitational acceleration.FGravity=m×g
where m is the object's mass and g is gravity's acceleration, which is 9.8 m/s2. In this case, the negative indicates that the force is downward-directed.
Equation for Perpendicular Force: The Perpendicular Force is equal to the gravitational force multiplied by the cosine of the angle of the inclined plane.FParallel=FGravity×Cos(Θ)
Equation for the Parallel Force: The Parallel Force is equal to the gravitational force multiplied by the sine of the inclined plane's angle.FParallel=FGravity×Sin(Θ)
To know more about The parallel and perpendicular components of the force of gravity refer to:
https://brainly.com/question/7411500
#SPJ1
An astronaut weights 8x10^2
Answer:
800
Explanation:
10^2 = 100
8 x 100 = 800
What will be the final temperature of a sample of water, if 32 kJ of heat is removed to lower 836
g of water starting with an initial water temperature of 25*C?
The final temperature of a sample of water is 15.89 ⁰C.
What will be the final temperature of the sample of water?
The final temperature of the sample of water is calculated by using the formula for heat capacity of water.
Q = mcΔθ
where;
Q is the heat capacity of the water = 32 kJm is the mass of the water = 836 gc is the specific heat capacity of water = 4200 J/kgCΔθ is the change in the temperature of the water = ?Δθ = Q / mc
The change in the temperature of the sample of water is calculated as follows;
Δθ = ( 32,000 ) / ( 0.836 x 4200 )
Δθ = 9.11 ⁰C
The final temperature of the water when heat is removed is calculated as follows;
T₂ = 25 ⁰C - 9.11 ⁰C = 15.89 ⁰C
Learn more about final temperature here: https://brainly.com/question/22338034
#SPJ1
How much force is necessary to raise a 150n crate up a ramp to a 4m loading dock if 600 j or work are performed
Answer:
To solve this problem, you can use the formula for work, which is work = force x distance. In this case, the distance the crate is moved is the height of the loading dock, or 4 meters. The amount of work performed is given as 600 joules. So, you can set up the equation like this:
600 joules = force x 4 meters
To solve for the force, you can divide both sides of the equation by 4 meters:
600 joules / 4 meters = force x 4 meters / 4 meters
This simplifies to:
150 newtons = force
So, the force necessary to raise the 150-newton crate up the ramp to the 4-meter loading dock is 150 newtons.
Teddy is playing with toy cars on his driveway. He rolls two cars directly at each other so that they will have a head-on collision. Their momentums before and after the collision are shown in the table below.
Momentum Before Momentum After
Car 1 9 g · m/s -2 g · m/s
Car 2 -6 g · m/s 4 g · m/s
Which of the following is true?
A.
This situation does not show a closed system.
B.
The situation shows a closed system.
C.
Car 2 has more mass than Car 1.
D.
Car 2 had a greater velocity before the collision than Car 1 had.
The true statement is " this situation does not show a closed system" because the linear momentum is not conserved.
option A is the correct answer.
What is the principle of conservation of linear momentum?
The principle of conservation of linear momentum states in a closed or isolated system, the total momentum of the system is always conserved.
Mathematically, the formula for the conservation of linear momentum is given as;
Pi = Pf
where;
Pi is the sum of the initial momentum of the systemPf is the sum of the final momentum of the systemm₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
where;
m₁ is the mass of the first objectm₂ is the mass of the second objectu₁ is the initial velocity of the first objectu₂ is the initial velocity of the second objectv₁ is the final velocity of the first objectv₂ is the final velocity of the second objectThe given momentum of the toy cars before and after collision;
Momentum Before Momentum After
Car 1 9 g m/s -2 g m/s
Car 2 -6 gm/s 4 g m/s
Sum of the momentum before the collision = 9 gm/s - 6 g m/s = 3 g m/s
Sum of the momentum after the collision = -2 gm/s + 4 gm/s = 2 g m/s.
The above does not show conservation of linear momentum, hence the system is closed because of the momentum is lost.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
Maritza's school provides a laptop to each student to use in the classroom and for
homework. What is the BEST way for her to use the laptop in her science class?
A.to look up bands who are coming to town?
B.to take notes as her teacher talks?
C.to complete her English assignment?
D.to email her friend in another class?
The best way for her to use the laptop in her science class is to take notes as her teacher talks
How can a laptop be used in a classroom?Fostering online collaboration with other students.Providing curriculum support and additional information to students.Promoting better organization: Laptops help students keep track of their assignments and utilize an online school calendar.Laptops allow students to collaborate with their classmates inside and outside the classroom. They can ask questions, compare notes and share what they have learned more readily. They can also work together on group projects even if they are not in the same locationIn the last several years, schools across the country have experimented with providing each student with a laptop to facilitate learning. In 2016, Michigan State University studied the results from a number of these programs to determine if providing laptops influenced academic performance. The researchers, led by Michigan State University’s Assistant Professor Binbin Zheng, looked at nearly 100 studies of the use of laptops in the classroom, known as “one-to-one computing environments.”To learn more about laptop refers to:
brainly.com/question/22060590
#SPJ1
After Victor returns to the house in chapters 21-continuation of Frankenstein, he looks out the window and sees the monster standing outside grinning. How does Victor react
to seeing him?
A. He invites him in to have a talk.
B. He runs outside to embrace him.
C. He draws his pistol and shoots at him.
Victor reacts when he sees him and threatens to call the police if he doesn't leave. Therefore, choice C is correct.
How does Frankenstein play out?When the court learns of Victor's residence on the Orkney Islands, Kirwin presents a compelling defense of Victor at the trial and is successful in securing Victor's release. Victor's absence from his lab in the Orkneys at the time of the murder is evidence that he did not commit the crime. Victor is taken home by Alphonse.
At the conclusion of Frankenstein, what happens to Victor?Victor Frankenstein wishes he could kill the monster he created when he dies in Frankenstein. Frankenstein is visited by the Monster. He informs Walton that he intends to kill himself and expresses regret for the murders he has committed.
To learn more about Victor Frankenstein here:
https://brainly.com/question/21437674
#SPJ1
Full Question = After Victor returns to the house in chapters 21-continuation of Frankenstein, he looks out the window and sees the monster standing outside grinning. How does Victor react
to seeing him?
A. He invites him in to have a talk.
B. He draws his pistol and shoots at him.
C. He threatens to call the police if he doesn't go away.
D. He runs outside to embrace him.
Which one of the following statements about velocity is true?
O Velocity is the magnitude of speed.
O Velocity is the displacement of an object divided by the time interval.
O Velocity describes how fast an object is changing speed.
O Speed and velocity refer to the same vector quantity.
Answer:
Velocity is the displacement of an object divided by the time interval.
Explanation:
Let's consider each choices:
1. Velocity is not the magnitude of speed. Velocity is a vector quantity which means it consists of both direction and magnitude. Speed is the magnitude of velocity, not the other way around.
3. Velocity describes how fast an object is changing speed. If a speed changes each time interval, that is not a velocity but rather the magnitude of acceleration. Magnitude of acceleration is change in speed over time. Acceleration is the one that describes how velocity is changing through time.
4. Speed and velocity refer to the same vector quantity. Speed is not a vector quantity but a scalar quantity which only has magnitude. Speed is also considered as the magnitude of velocity as well.
Therefore, the only correct choice is 2. Velocity is the displacement of an object divided by the time interval. This is true since velocity is change in position (displacement) over time.
16. A car A is moving at a speed of 6m/s due north and car B is moving at a speed of 8m/s due east. Find the magnitude and direction of the velocity of car A relative to car B
Batman shoots a grappling hook
34.6 m/s at an 80.2° angle. What is the magnitude only (no direction) of the velocity of the hook 1.09 s later?
(Unit = m/s)
Answer:
24.132 m/s
Explanation:
Note
[tex]U[/tex] = Initial Velocity
[tex]U_x[/tex] = Initial Horizontal Velocity
[tex]U_y[/tex] = Initial Vertical Velocity
[tex]V[/tex] = Final Velocity
[tex]V_x[/tex] = Final Horizontal Velocity
[tex]V_y[/tex] = Final Vertical Velocity
[tex]B[/tex] = launch angle
[tex]g[/tex] = gravity
[tex]t[/tex] = time
[tex]U_x=U*cos(B)[/tex]
[tex]U_y=U*sin(B)[/tex]
The horizontal component of the velocity is constant throughout the flight. So [tex]U_x=V_x[/tex] It can be defined as
[tex]V_x=U*cos(B)[/tex]
We can use the kinematics equation
[tex]V=U+at[/tex]
Gravity is acting downwards; gravity would be negative
[tex]V_y=U_y-gt[/tex]
The magnitude of the velocity can be defined as
[tex]V=\sqrt{V_x^2+V_y^2}[/tex]
Inserting some of the other equations gives us an equation at a given time (t).
[tex]V=\sqrt{(U*cos(B))^2+(U*sin(B)-gt)^2}[/tex]
[tex]V=\sqrt{(UcosB)^2+(UsinB)^2+(gt)^2-2gtU*sinB[/tex]
[tex]V=\sqrt{U^2+g^2*t^2-2*t*g*U*sinB}[/tex]
[tex]V(t)=\sqrt{U^2+g^2t^2-2tgUsinB}[/tex]
We are given
[tex]U=34.6[/tex]
[tex]B=80.2[/tex]
[tex]t=1.09[/tex]
[tex]g=9.81[/tex]
[tex]V(1.09)=\sqrt{34.6^2+9.81^2*1.09^2-2*1.09*9.81*34.6*sin80.2}[/tex]
[tex]V(1.09)=\sqrt{34.6^2+114.338-2*1.09*9.81*34.6*sin80.2}[/tex]
[tex]V(1.09)=\sqrt{34.6^2+114.338-739.94868*sin80.2}[/tex]
[tex]V(1.09)=\sqrt{34.6^2+114.338-729.151}[/tex]
[tex]V(1.09)=\sqrt{1197.16+114.338-729.151}[/tex]
[tex]V(1.09)=\sqrt{582.347}[/tex]
[tex]V(1.09)=24.132[/tex]
A rating/review would be much appreciated. Hope this helps!
Let me know if you have any questions about my work
A lawnmower is pushed with a force of 72 Newtons at an angle of 40 degrees from the horizontal. How much work is done to the mower if it moves 740 meters?
The work done to the mower is the product of the external force applied on the object and the distance covered by the object which is equal to 40,811 Joules.
What is Work done?Work done on an object can be defined as the product of external force applied on the object and the distance over which the force is being applied on the object. Work is done on an object when a force is applied to an object and the object is moved through certain distance.
From this we can see that the horizontal component of the force:
X-Component (horizontal component):
cos(θ) = x/F
Then,
X= F cos(θ).…..(1)
Now putting the values of F and θ in equation (1) we get,
X = 72 N × cos(40)
X = 72 N × 0.766
X= 55.15 N this is the x-component force
The work done to the mower is:
W = F × d
W = 55.15 × 740
W = 40,811 Joules
The work done to the mower is 40811 Joules.
Learn more about Work here:
https://brainly.com/question/13662169
#SPJ1
An appeal of a state appellate court ruling can next be made to:
• A. a state trial court.
• B. the state supreme court.
• C. the U.S. Supreme Court.
• D. a U.S. Court of Appeals.
The decision of the country's highest court may then be appealing to that Supreme Court of both the U. S., but only in cases where the issue involves federal law.
Why is Supreme renowned?In particular, followers of hip-hop, surfing, and post - punk culture will find their clothing appealing. Every person who appreciates streetwear will discover the ideal item thanks to Supreme's wide range of clothing.
Why is Supreme so expensive?Rebellious and distinctive brand image! Despite giving a venture - capital group a 50% ownership in the company, Supreme has been able to keep its skater roots and fan base. To top it all off, the Supremes' emblem is distinctive, outstanding, and simple to recognize.
To know more about Supreme visit:
https://brainly.com/question/17436247
#SPJ1
Part E
Once you complete your outline, write a 500- to 750-word paper using word processing software. Add a works cited page at the end to give credit to your sources. Submit your completed paper along with this activity to your teacher for evaluation.
A Voyage to Proxima Centauri
Proxima Centauri is the second closest star to our solar system, which makes scientists curious to know more about it. What do we know about Proxima Centauri? How did we discover this information? Is it possible for humans to travel to this star? In this task, you will research and write a 500- to 750 word paper that answers these questions. Follow these steps to complete your research and writing. This guide about the research process can help.
Estimated time to complete: 3 hours
Part A
The goal of your paper is to describe the history of the discovery and research of Proxima Centauri. Another goal is to find the possibilities of traveling to this star. Some questions that your paper should answer are:
When was Proxima Centauri discovered?
How was Proxima Centauri discovered?
How have scientists researched Proxima Centauri?
What technologies have they used? What types of data do these technologies collect?
Have spacecraft ever reached this star?
What are the limitations of sending spacecraft to Proxima Centauri?
What accommodations would humans need to travel to Proxima Centauri?
Proxima Centauri otherwise known as Alpha Centauri C, is the closest star to our solar system, located about 4.24 light-years away. It was discovered in 1915 by Robert Innes, the director of the Union Observatory in South Africa. Innes identified Proxima Centauri as a possible member of the Alpha Centauri system after noticing that the star had a similar proper motion to Alpha Centauri A and B.
Proxima Centauri was first observed through telescopes, which allowed scientists to study the star's spectra and estimate its distance from Earth. In the following decades, scientists continued to study Proxima Centauri through telescopes, including the Hubble Space Telescope, which provided high-resolution images of the star.
In 2016, the European Southern Observatory announced the discovery of an exoplanet orbiting Proxima Centauri, called Proxima Centauri b. This discovery was made using the radial velocity method, which measures the star's small wobbles caused by the gravitational pull of an orbiting planet.
What are the major challenges facing the discovery of Proxima Centauri?Despite the advances in our understanding of Proxima Centauri, no spacecraft have ever reached this star. The distance between Proxima Centauri and Earth is so vast that it would take tens of thousands of years to reach the star using current propulsion technology.
One potential solution to this problem is the use of interstellar travel, which would allow humans to travel to Proxima Centauri within a human lifetime. There are several proposed methods for interstellar travel, including using a starship propelled by fusion engines or a massive light sail pushed by a beam of lasers. However, these technologies are still in the theoretical stage and have not yet been developed.
There are also many other challenges that must be overcome in order for humans to travel to Proxima Centauri. For example, humans would need to find a way to protect themselves from the high levels of radiation that they would be exposed to during the journey. They would also need to find a way to provide enough food, water, and other resources to sustain themselves for the duration of the trip.
Overall, while it is theoretically possible for humans to travel to Proxima Centauri, it would be a massive undertaking that would require significant technological advancements and the development of new solutions to many challenges.
Sources of Works Cited include:
"Proxima Centauri." Wikipedia, Wikimedia Foundation, 5 Jan. 2021,
"Proxima Centauri b." Wikipedia, Wikimedia Foundation, 20 Nov. 2020,
"Interstellar Travel." Wikipedia, Wikimedia Foundation, 4 Jan. 2021,
Therefore, the correct answer is as given above
learn more about Proxima Centauri: https://brainly.com/question/21107590
#SPJ1
A student collected data about the speed of an object over time.
Which type of graph should the student use to represent the data?
Answer:I have already did this the answer was bar graph!
Explanation:
1. What does Louis de Broglie's principle propose about electrons?
They have energy and momentum.
They behave as a wave and a particle.
They contain high-energy and low-energy photons.
They interact with other electrons to form new substances.
Louis de Broglie's principle of electrons states that (b) They behave as a wave and a particle.
The de Broglie equation is one of the equations that is commonly used to define the wave properties of matter. It basically describes the wave nature of the electron.Electromagnetic radiation, exhibit dual nature of a particle (having a momentum) and wave (expressed in frequency, wavelength). Microscopic particle-like electrons also proved to possess this dual nature property.Louis de Broglie in his thesis suggested that any moving particle, whether microscopic or macroscopic will be associated with a wave character. It was called ‘Matter Waves’. He further proposed a relation between the velocity and momentum of a particle with the wavelength, if the particle had to behave as a wave.Particle and wave nature of matter, however, looked contradictory as it was not possible to prove the existence of both properties in any single experiment. This is because of the fact that every experiment is normally based on some principle and results related to the principle are only reflected in that experiment and not the other.To know more about electrons visit:
https://brainly.com/question/24170350
#SPJ1
a boy is swinging a toy on apiece of string in a vertical circle. the toy has mass 150g and the radius of circle is 0.8m. a) he swings the toy with a linear velocity 2m/s. will the top move in a circle? explain your answer.
The top move will in a circle because there is tension at the top which will add up with the weight of the toy to maintain equal centripetal force providing the circular motion.
What is tension of the top of the vertical circle?
The tension experienced by the top of the vertical circle is calculated by using the following formula.
T = Fc - W
where;
Fc is the centripetal force of the toyW is the weight of the toyT = mv²/r - mg
where;
m is the mass of the toyv is the linear speed of the toyg is acceleration due to gravityr is the radius of the vertical circleThe tension experienced by the toy at the top of the vertical circle is calculated as follows;
T = ( 0.15 x 2² / 0.8 ) - ( 0.15 x 9.8 )
T = 0.75 - 1.47
T = -0.72 N
Thus, with the negative tension at the top of the vertical circle, the sum of the tension force and the weight of the toy will be equal to the centripetal force to maintain the orbit of the toy in a circular path.
Learn more about tension of vertical circle here: https://brainly.com/question/19904705
#SPJ1
Sally and Sam are in a spaceship that comes to within 15,000 km of the asteroid Ceres. Determine the force Sally experiences, in N, due to the presence of the asteroid. The mass of the asteroid is 8.7 1020 kg and the mass of Sally is 68 kg. For calculation purposes, assume the two objects to be point masses.
The gravitational force that is acting on the masses is 1.73 * 10^-2 N.
What is the force?We know that the force of gravity is that kind of force that is going to act on any two of the objects that we have on the earth. This force as we know it is attractive force. The implication of this is that any two masses that we find on the earth are the forces that would have to be attracted to each other.
Let us note that we would have the masses that we have of the asteroid and that of sally as m1 and m2 while we have the force as;
F = G m1m2/r^2
G = gravitational constant
F = magnitude of the force
m1 and m2 = masses
r = distance of separation.
We then have;
F = 6.6 * 10^-11 * 8.7 * 10^20 * 68/(15 * 10^6)^2
F = 3.9 * 10^12/2.25 * 10^14
F = 1.73 * 10^-2 N
Learn more about gravitational force:https://brainly.com/question/12528243
#SPJ1
An object has 100 J of kinetic energy. If the object’s mass doubles, what is its kinetic energy?
An object has 100 J of kinetic energy. If the object’s mass doubles, then its kinetic energy will be 200J and is denoted as option C.
What is Kinetic energy?This is referred to as the type of energy that it possesses due to its motion and can also defined as the work which is needed to accelerate a body of a given mass from rest to its stated velocity.
The unit is in Joules and the formula is 1/2mv² where m is the mass and v is the velocity of the body or object. In a scenario where the mass is doubled or tripled and the velocity is constant then the kinetic energy will also be doubled or tripled respectively.
For instance, lets assume initial mass is 50kg and the v² is 50m/s then the kinetic energy is 1/2mv² which is 1/2 × 50 × 50 = 1250J. When the mass is doubled it becomes 100kg which 1/2 × 100 × 50 = 2500J which depicts that it was also doubled.
Read more about Kinetic energy here https://brainly.com/question/8101588
#SPJ1
The options are:
A. 50 Joules.
B. 100 Joules.
C. 200 Joules.
D. 400 Joule
Assuming an object has 100 Joules of kinetic energy. If the object’s mass doubles, its kinetic energy would be equal to: C. 200 Joules.
What is kinetic energy?In Science, kinetic energy can be defined as a type of energy that's possessed by a physical object or body, especially due to its motion or a change in velocity (acceleration).
This ultimately implies that, a physical object or body would gain more of kinetic energy as it falls back toward the Earth because it is in motion.
How to calculate kinetic energy?Mathematically, kinetic energy can be calculated by using this formula:
K.E = 1/2 × mv²
Where:
K.E represents the kinetic energy.m represents the mass.v represents the speed or velocity.Since the mass of the object doubles, its kinetic energy would be twice that of its initial kinetic energy;
Kinetic energy = 2 × initial kinetic energy
Kinetic energy = 2 × 100
Kinetic energy = 200 Joules.
Read more on kinetic energy here: https://brainly.com/question/8101588
#SPJ1
Complete Question:
A. 50 Joules.
B. 100 Joules.
C. 200 Joules.
D. 400 Joules.
A 2kg block is attached to a spring for which K=200N/m it is held at an extension of 5 cm and then released at t=0.
A, the displacement as a function of time?
B, the acceleration when X=+A/2
C, the total energy when X=+A/2
D, the velocity when X=+A/2
The displacement, acceleration, energy and velocity of the simple harmonic motion of the mass attached to the spring are as follows;
A) x(t) = 0.05·sin(10·t + π/2)
B) The acceleration is; a(t) = -2.5 m/s²
C) The total energy is 0.0625 J
D) The velocity is ±√3/4 m/s
What is a simple harmonic motion?The restoring force of a body in simple harmonic motion is directly proportional to the displacement of the body from its mean or central position.
Mass of the block, m = 2 kg
The spring constant, k = 200 N/m
The extension of the spring = 5 cm
Time at which the spring is released, t = 0
A. The motion of the spring with the mass is a Simple Harmonic Motion
The angular velocity can be obtained using the formula;
ω = √(k/m)
Therefore;
ω = √(200/2) = 10
The angular velocity of the block on the spring is, ω = 10 rad/s
The period, T = The time to complete 2·π rad
Therefore; T = 2·π rad/(10 rad/s) = π/5 s
The amplitude, A, is the cistance of the mass from the at rest position, which is 5 cm = 0.05 m
The equation of the extension of the spring is therefore;
x(t) = 0.05·sin(10·t + c)
At t = 0, x(t) = 0.05, therefore;
sin(10 × 0 + c) = sin(c) = 1
c = π/2
The equation for the displacement as a function of time is therefore;
x(t) = 0.05·sin(10·t + π/2)B. The acceleration when x(t) = A/2 is obtained as follows;
x(t) = 0.05·sin(10·t + π/2)
A/2 = 0.05·sin(10·t + π/2)
A = 0.05
0.05/2 = 0.05·sin(10·t + π/2)
sin(10·t + π/2) = 1/2
10·t + π/2 = π/6
t = -π/30
cos(10×(-π/30) + π/2) = ±√3/2
v(t) = x'(t) = 0.05 × 10 × cos(10·t + π/2)
a(t) = v'(t) = -5·sin(10·t + π/2)
a(t) = v'(t) = -5·sin(10·t + π/2) = -5 × 1/2 = -2.5
The acceleration when X = + A/2 is -2.5 m/s²C. The energy in a pring = (1/2)·k·x²
When x = A/2, we get;
E = (1/2) × 200 × (0.05/2)² = 0.0625
The energy in the spring when x = A/2 is 0.0625 JD) The velocity when x = A/2 is; v(t) = x'(t) = 0.05 × 10 × cos(10·t + π/2)
v(t) = 0.5 × cos(10·t + π/2)
When x = A/2, sin(10·t + π/2) = 1/2, therefore;
cos(10·t + π/2) = ±√3/2
v(t) = 0.5 × ±√3/2 = ±√3/4
When x = A/2, the velocity, v(t) = ±√3/4 m/sLearn more about simple harmonic motion here: https://brainly.com/question/25865056
#SPJ1
Corn plants and milkweed plants grow in the same area. Over several years, the milkweed plants have taken over the field and the corn plants no longer have space to grow.
This best demonstrates which type of an interaction between the plants?
cooperation
parasitism
commensalism
competition
The interaction between the Corn plants and milkweed plants demonstrates as competition.
What is competition in Plants community?Competition is typically considered to refer to the detrimental consequences that neighbors' presence has on a plant's fitness or growth, typically through lowering the resources available.
In addition to resources, disturbance, herbivory, and mutualisms, competition can be a significant factor in controlling plant populations. The resource involved is depending on the species and the region, as all plants require a few fundamental ingredients.
As corn plants and milkweed plants grow in the same area, the interaction between the Corn plants and milkweed plants demonstrates competition.
Learn more about competition here:
https://brainly.com/question/9563763
#SPJ1
Kam does 4000J of work in climbing a set of stairs. if he does work in 6 seconds, whi is his power output?
Answer:
666.7 W
Explanation:
Power = P = W/t = 4000 J/6 s = 666.7 W (watts)
please answer fast it doesn't have to be long please :)
Juan drives his car around a curve at a speed of 17.0 m/s. Assume the curve can be approximated by an arc of a circle of radius 122.0 m. If a force of 7380 N is required to maintain the car’s circular motion, what is the car’s mass?
The mass of the car moving with a velocity of 17 m/s is 3115.4 kg.
What is mass?Mass is the quantity of matter a body contains. The S.I unit of mass is kilogram
To calculate the mass of the car, we use the formula below
Formula:
m = Fr/v²...................... Equation 1Where:
m = Mass of the carF = Forcer = Radiusv = VelocityFrom the question,
Given:
F = 7380 Nr = 122 mv = 17 m/sSubstitite these values into equation 1
m = (7380×122)/17²m = 3115.4 kgHence, the mass of the car is 3115.4 kg.
Learn more about mass here: https://brainly.com/question/28021242
#SPJ1