Step-by-step explanation:
g(x) = 3^-x
x = 7/5
so,
3^-(7/5)
the "-" says "1/...", therefore
1/(3^(7/5))
that is the expressing with the positive rational exponent.
with a fractional a/b exponent, "a" means "to the power of", and "b" means "pull the bth root".
so,
1/(3^(7/5)) =
[tex] \frac{1}{ \sqrt[5]{ {3}^{7} } } [/tex]
that is the expression with a radical.
to find the point find the origin (0, 0) point. from there go eighth on the x-axis to 7/5 = 1.4. and from there you go straight up to the curve. that is the point of g(7/5).
1/(3^(7/5)) = 0.214798005...
that is what the y value would be of that point.
by the way, the graph in the picture does not match the actual graph.
The specified dimension of a part is. 150 inch. The blueprint indicates that all decimal tolerances are ±. 005 inch. Determine the acceptable dimensions for this to be a quality part. ___
The acceptable dimensions for this to be a quality part is 149.995 inch and 150.005 inch.
Given, Specified dimension of a part is 150 inch .Blueprint indicates that all decimal tolerances are ±0.005 inch. Tolerances are the allowable deviation in the dimensions of a component from its nominal or specified value. The acceptable dimensions for this to be a quality part is calculated as follows :Largest acceptable size of the part = Specified dimension + Tolerance= 150 + 0.005= 150.005 inch .Smallest acceptable size of the part = Specified dimension - Tolerance= 150 - 0.005= 149.995 inch
Know more about decimal tolerances here:
https://brainly.com/question/32202718
#SPJ11
What is the value of x?
The value of x is 19.79.
Given base of a right angled triangle as 14, hypotenuse is marked as x.
Firstly calculate the perpendicular of the right angled triangle with the help of trigonometric functions,
tanα= perpendicular/base
tan45°= 14/base
tan45°=1
1= 14/base
base=14
Now using Pthagorean theorem,
We know by Pythagoras theorem, square of the hypotenuse is equal to the sum of the squares of the legs,
Hypotenuse² = Perpendicular² + Base ²
Substitute the values of perpendicular and base in the pythagorean theorem,
x² = 14² + 14²
x² = 196 +196
x=√392
x= 19.79
Hypotenuse of a right angled triangle is 19.79 .
Know more about hypotenuse here,
https://brainly.com/question/31658142
#SPJ1
consider x=h(y,z) as a parametrized surface in the natural way. write the equation of the tangent plane to the surface at the point (5,2,−1) given that ∂h∂y(2,−1)=5 and ∂h∂z(2,−1)=2.
The equation of the tangent plane to the surface x=h(y,z) at the point (5,2,-1) is (x - 5) = 5(y - 2) + 2(z + 1), where the partial derivatives ∂h/∂y(2,-1) = 5 and ∂h/∂z(2,-1) = 2 are used to determine the slope of the surface at that point.
The tangent plane to a surface at a given point is a flat plane that touches the surface at that point and has the same slope as the surface. In other words, the tangent plane gives an approximation of the surface in a small region around the given point.
Now, to find the equation of the tangent plane to the surface x=h(y,z) at the point (5,2,-1), we need to determine the slope of the surface at that point. This slope is given by the partial derivatives of the function h with respect to y and z at the point (2,-1), as specified in the problem.
Using these partial derivatives, we can write the equation of the tangent plane in the form:
(x - 5) = 5(y - 2) + 2(z + 1)
Here, (5,2,-1) is the point on the surface at which we want to find the tangent plane, and the partial derivatives ∂h/∂y(2,-1) = 5 and ∂h/∂z(2,-1) = 2 specify the slope of the surface at that point in the y and z directions, respectively.
To know more about tangent plane here
https://brainly.com/question/31433124
#SPJ4
A factory produces 1200 cars per week. 2% of the cars are painted blue. How many blue cars are produced each week?
Answer:
: .24 cars
Step-by-step explanation:
2/100×1200=24
under what conditions will a diagonal matrix be orthogonal?
A diagonal matrix can only be orthogonal if all of its diagonal entries are either 1 or -1.
For a matrix to be orthogonal, it must satisfy the condition that its transpose is equal to its inverse. For a diagonal matrix, the transpose is simply the matrix itself, since all off-diagonal entries are zero. Therefore, for a diagonal matrix to be orthogonal, its inverse must also be equal to itself. This means that the diagonal entries must be either 1 or -1, since those are the only values that are their own inverses. Any other diagonal entry would result in a different value when its inverse is taken, and thus the matrix would not be orthogonal. It's worth noting that not all diagonal matrices are orthogonal. For example, a diagonal matrix with all positive diagonal entries would not be orthogonal, since its inverse would have different diagonal entries. The only way for a diagonal matrix to be orthogonal is if all of its diagonal entries are either 1 or -1.
Learn more about orthogonal here
https://brainly.com/question/30772550
#SPJ11
I need help pls.
MULTIPLE CHOICE Kala is making a tile
design for her kitchen floor. Each tile has
sides that are 3 inches less than twice
the side length of the smaller square inside
the design. (Lesson 10-4)
2x - 3
Select the polynomial that represents the
area of the tile.
(A) 2x²-3x
(B) 4x² - 12x +9
C4x² + 12x + 9
(D) 4x² - 9
Answer:
D. 4x²-3x
Step-by-step explanation:
If the side is 2x-3 you multiply both numbers by themselves. 2x times 2x = 4x^2 and 3 times 3 is nine
Hope this helps :)
I am also in Algebra 1 as a darn 7th grader
If 8x−3y=5 is a true equation, what would be the value of 6+8x−3y?
The solution is;6 + 8x − 3y = 11.
Given equation is 8x − 3y = 5To find the value of 6 + 8x − 3y, we need to simplify the expression as follows;6 + 8x − 3y = (8x − 3y) + 6 = 5 + 6 = 11Since the equation is true, the value of 6 + 8x − 3y is 11. Therefore, the solution is;6 + 8x − 3y = 11.
Learn more about equation here,
https://brainly.com/question/29174899
#SPJ11
1. Statistics from Cornell’s Northeast Regional Climate Center indicate that Ithaca, NY, gets an average of 35.4" of rain each year, with a standard deviation of 4.2". Assume that a Normal model applies. (Problem from Intro Stats by De Veaux, Velleman, Bock – 3rd Edition)
a. During what percentage of years does Ithaca get more than 40" of rain?
b. Less than how much rain falls in the driest 20% of all years?
c. A Cornell University student is in Ithaca for 4 years. Let represent the mean amount of rain for those 4 years. Describe the sampling distribution model of this sample mean, Be sure to check assumptions and conditions.
d. What’s the probability that those 4 years average less than 30" of rain?
Probability is a measure of the likelihood or chance of an event occurring.
a. To find the percentage of years where Ithaca gets more than 40" of rain, we need to calculate the z-score for this value and then use a standard normal table to find the percentage. The z-score is:
z = (40 - 35.4) / 4.2 = 1.33
From a standard normal table, we find that the percentage of values above z = 1.33 is approximately 9.87%. Therefore, during about 9.87% of years, Ithaca gets more than 40" of rain.
b. To find the value of rainfall corresponding to the driest 20% of years, we need to calculate the z-score for the 20th percentile and then convert it back to rainfall units. The z-score is:
z = invNorm(0.20) = -0.84
where invNorm is the inverse normal function. Therefore,
-0.84 = (x - 35.4) / 4.2
Solving for x, we get:
x = 32.2"
So less than 32.2" of rain falls in the driest 20% of all years.
c. Since the sample size n = 4 is small and the population standard deviation is unknown, we need to use the t-distribution to describe the sampling distribution model of the sample mean. However, since the sample size is small, we also need to assume that the population follows a normal distribution.
Under these assumptions, the sampling distribution of the sample mean is approximately normal with a mean of μ = 35.4" and a standard error of σ/√n = 4.2/√4 = 2.1". Therefore, the sampling distribution of the sample mean is:
t(3, 35.4, 2.1)
where t denotes the t-distribution, 3 is the degrees of freedom (n - 1), 35.4 is the mean, and 2.1 is the standard error.
d. To find the probability that the 4-year average is less than 30", we need to calculate the z-score for this value and then use the t-distribution with 3 degrees of freedom to find the probability. The z-score is:
z = (30 - 35.4) / (4.2 / √4) = -2.57
Using a t-table or calculator with 3 degrees of freedom, we find that the probability of a t-value less than -2.57 is approximately 0.041. Therefore, the probability that those 4 years average less than 30" of rain is approximately 0.041 or 4.1%.
To learn more about percentage visit:
brainly.com/question/29306119
#SPJ11
let v be the set of continuous function in the interval [a,b] abd let w = f(a) = f(b) determine whether w is a subspace of v
Analysis, we can conclude that W = {f ∈ V : f(a) = f(b)} is Indeed a subspace of V
To determine whether the set W = {f ∈ V : f(a) = f(b)} is a subspace of V, we need to check three properties:
The zero vector is in W.
W is closed under vector addition.
W is closed under scalar multiplication.
Let's analyze each property:
Zero vector: The zero vector in V is the constant function f(x) = 0 for all x in [a, b]. This function satisfies f(a) = f(b) = 0, so the zero vector is in W.
Vector addition: Suppose f1 and f2 are two functions in W. We need to show that their sum, f1 + f2, is also in W. Let's evaluate (f1 + f2)(a) and (f1 + f2)(b):
(f1 + f2)(a) = f1(a) + f2(a) = f1(b) + f2(b) = (f1 + f2)(b)
Since (f1 + f2)(a) = (f1 + f2)(b), the sum f1 + f2 satisfies the condition for W. Therefore, W is closed under vector addition.
Scalar multiplication: Let f be a function in W and c be a scalar. We need to show that the scalar multiple cf is also in W. Let's evaluate (cf)(a) and (cf)(b):
(cf)(a) = c * f(a) = c * f(b) = (cf)(b)
Since (cf)(a) = (cf)(b), the scalar multiple cf satisfies the condition for W. Therefore, W is closed under scalar multiplication.
Based on the above analysis, we can conclude that W = {f ∈ V : f(a) = f(b)} is indeed a subspace of V
To know more about Indeed .
https://brainly.com/question/17710449
#SPJ11
let u = {8, 9, 10, 11, 12, 13, 14}, a = {8, 9, 10, 11}, b = {8, 9, 12, 13}, and c = {10, 12, 14}. list all the members of the given set. (enter your answers as a comma-separated list.) (a ∪ b) ∩ c
The members of the set (a ∪ b) ∩ c are 10, 12. The symbol for union is ∪. The intersection of two sets is a set that contains all the elements that are in both sets.
To find (a ∪ b) ∩ c, we first find the union of sets a and b:
a ∪ b = {8, 9, 10, 11, 12, 13}
Then we find the intersection of this set with set c:
(a ∪ b) ∩ c = {10, 12}
Therefore, the members of the set (a ∪ b) ∩ c are 10, 12.
In set theory, the union of two sets is a set that contains all the elements that are in either set. The symbol for union is ∪. The intersection of two sets is a set that contains all the elements that are in both sets. The symbol for intersection is ∩. To find the union of sets a and b, we simply list all the elements in either set, without repetition. To find the intersection of sets (a ∪ b) and c, we first find the union of sets a and b, and then find the elements that are common to both the union and set c.
Learn more about intersection here
https://brainly.com/question/30429663
#SPJ11
let be a random variable with pdf f(x)=4 e^-4x,x>=0 . find p(0.5<=x>=1) (round off to third decimal place).
A random variable is a quantity that takes on different values depending on the outcome of a random process. In this case, we are given a random variable with a probability density function (pdf) of [tex]f(x)=4 e^{-4x},x>=0[/tex]. A pdf is a function that describes the probability distribution of a continuous random variable.
To find the probability of the random variable being between 0.5 and 1, we need to integrate the pdf over the range of 0.5 to 1. The integral of f(x) from 0.5 to 1 is:
integral from 0.5 to 1 of [tex]4 e^{-4x} dx[/tex]
To solve this integral, we can use integration by substitution. Let u=-4x, then [tex]\frac{du}{dx} = 4[/tex] and [tex]dx=\frac{-du}{4}[/tex]. Substituting in the integral, we get:
integral from -2 to -4 of [tex]-e^u du[/tex]
Integrating this, we get:
[tex]-[-e^u][/tex]from -2 to -4 =[tex]-[e^-4 - e^-2][/tex]
Rounding this to the third decimal place, we get:
0.018
Therefore, the probability of the random variable being between 0.5 and 1 is 0.018. It is important to note that the answer is in decimal form because the random variable is continuous. If it were discrete, the answer would be in whole numbers.
Learn more about probability here:
https://brainly.com/question/30034780
#SPJ11
Allie has 123 oranges to put in 11 baskets if she evenly divides the oranges among the 11 baskets how many oranges will be left over
Allie will have 2 oranges left over after dividing them evenly among the 11 baskets.
If Allie has 123 oranges and she wants to evenly divide them among 11 baskets, we can find the number of oranges left over by dividing the total number of oranges by the number of baskets and calculating the remainder.
To evenly distribute the oranges among the 11 baskets, we perform the division:
123 ÷ 11 = 11 with a remainder of 2
The quotient 11 represents the number of oranges that can be evenly distributed among the 11 baskets. The remainder 2 represents the number of oranges left over after the even distribution.
Therefore, Allie will have 2 oranges left over after dividing them evenly among the 11 baskets.
It's important to note that when dividing a certain number of objects among a specific number of groups, remainders may occur if the division is not exact. In this case, with 123 oranges and 11 baskets, 11 oranges can be evenly distributed, leaving 2 oranges as leftovers.
For more questions on dividing
https://brainly.com/question/30126004
#SPJ8
test the polar equation for symmetry with respect to the polar axis, the pole, and the line = 2 . (select all that apply.) r = 6 5 − 4 sin()
The given polar equation is: r = 6/(5 − 4sin(θ))
Symmetry with respect to the polar axis:
A polar equation is symmetric with respect to the polar axis if replacing θ with −θ results in the same equation. Substituting −θ for θ, we get:
r = 6/(5 − 4sin(−θ)) = 6/(5 + 4sin(θ))
Since these equations are not identical, the given polar equation is not symmetric with respect to the polar axis.
Symmetry with respect to the pole:
A polar equation is symmetric with respect to the pole if replacing θ with θ + π results in the same equation. Substituting θ + π for θ, we get:
r = 6/(5 − 4sin(θ + π)) = 6/(−5 − 4sin(θ))
Multiplying the numerator and denominator by -1, we get:
r = -6/(5 + 4sin(θ))
Since this equation is not identical to the given equation, the given polar equation is not symmetric with respect to the pole.
Symmetry with respect to the line θ = π/2 or x = 2:
A polar equation is symmetric with respect to the line θ = π/2 (or x = a, where a is a constant) if replacing θ with π − θ results in the same equation. Substituting π − θ for θ, we get:
r = 6/(5 − 4sin(π − θ)) = 6/(5 + 4sin(θ))
Since these equations are identical, the given polar equation is symmetric with respect to the line θ = π/2 or x = 2.
Therefore, the given polar equation is symmetric with respect to the line θ = π/2 or x = 2, but it is not symmetric with respect to the polar axis or the pole.
To know more about polar equation , refer here :
https://brainly.com/question/1269731#
#SPJ11
Use the Extension of the Power Rule to Explore Tangent Lines Question Find the equation of the tangent line to the graph of the function f(x)-91/3+5 at z 27.
Give your equation in slope-intercept form y- mz + b. Use improper fractions for m or b if necessary. Provide your answer below:
To find the equation of the tangent line to the graph of the function f(x) at x = a, we can use the extension of the power rule. The equation of the tangent line to the graph of the function f(x) = (9x/3) + 5 at x = 27 is y = 9x - 232.
To find the equation of the tangent line to the graph of the function f(x) at x = a, we can use the extension of the power rule, which states that if f(x) = x^n, then f'(x) = nx^(n-1).
First, we find the derivative of f(x) using the power rule:
f(x) = (9x/3) + 5
f'(x) = 9/3
Next, we evaluate f'(x) at x = 27:
f'(27) = 9/3 = 3
This gives us the slope of the tangent line at x = 27. To find the y-intercept of the tangent line, we need to find the y-coordinate of the point on the graph of f(x) that corresponds to x = 27. Plugging x = 27 into the original equation for f(x), we get:
f(27) = (9*27)/3 + 5 = 82
Therefore, the point on the graph of f(x) that corresponds to x = 27 is (27, 82). We can now use the point-slope form of the equation of a line to find the equation of the tangent line:
y - 82 = 3(x - 27)
Simplifying this equation gives:
y = 3x - 5*3 + 82
y = 3x - 232
Therefore, the equation of the tangent line to the graph of the function f(x) = (9x/3) + 5 at x = 27 is y = 3x - 232, which is in slope-intercept form.
Learn more about slope-intercept form here:
https://brainly.com/question/29146348
#SPJ11
Which choice is the correct graph of |x| < 4
Answer:
Graph D is the correct graph.
Let us consider an aging spring - mass system where the restoring force of the spring and the damping force are both weakening exponentially over time. Let the equation of motion of the mass be governed by the following initial value problem
In a spring-mass system, the restoring force of the spring and the damping force play a crucial role in governing the motion of the mass. However, in an aging system, these forces may weaken exponentially over time, leading to changes in the dynamics of the system.
Consider the initial value problem of an aging spring-mass system, where the equation of motion of the mass is governed by weakened restoring and damping forces. The solution to this problem involves finding the displacement of the mass over time.
One approach to solving this problem is to use the theory of differential equations. We can use the equation of motion and apply the necessary mathematical tools to find the solution. Alternatively, we can use numerical methods such as Euler's method or the Runge-Kutta method to obtain approximate solutions.
As the restoring and damping forces weaken over time, the system's motion becomes less oscillatory and more damped. The amplitude of the oscillations decreases, and the frequency of the oscillations also decreases. The system eventually approaches an equilibrium state where the mass comes to rest.
In conclusion, an aging spring-mass system with weakened restoring and damping forces is an interesting problem in the field of physics and engineering. Understanding the dynamics of such systems can be useful in predicting the behavior of real-world systems that degrade over time.
Learn more about spring-mass system here:
https://brainly.com/question/31593319
#SPJ11
use the chain rule to find ∂z/∂s and ∂z/∂t. z = sin() cos(), = st9, = s9t
∂z/∂s = -sin()cos()t9 + cos()sin()9st2 and ∂z/∂t = sin()cos()s - cos()sin()81t.
To find ∂z/∂s and ∂z/∂t, we use the chain rule of partial differentiation. Let's begin by finding ∂z/∂s:
∂z/∂s = (∂z/∂)(∂/∂s)[(st9) cos(s9t)]
We know that ∂z/∂ is cos()cos() - sin()sin(), and
(∂/∂s)[(st9) cos(s9t)] = t9 cos(s9t) + (st9) (-sin(s9t))(9t)
Substituting these values, we get:
∂z/∂s = [cos()cos() - sin()sin()] [t9 cos(s9t) - 9st2 sin(s9t)]
Simplifying the expression, we get:
∂z/∂s = -sin()cos()t9 + cos()sin()9st2
Similarly, we can find ∂z/∂t as follows:
∂z/∂t = (∂z/∂)(∂/∂t)[(st9) cos(s9t)]
Using the same values as before, we get:
∂z/∂t = [cos()cos() - sin()sin()] [(s) (-sin(s9t)) + (st9) (-9cos(s9t))(9)]
Simplifying the expression, we get:
∂z/∂t = sin()cos()s - cos()sin()81t
Therefore, ∂z/∂s = -sin()cos()t9 + cos()sin()9st2 and ∂z/∂t = sin()cos()s - cos()sin()81t.
Learn more about chain rule here:
https://brainly.com/question/28972262
#SPJ11
Evaluate the triple integral over the indicated bounded region E. E x dV, where E = {(x, y, z)| −2 ≤ x ≤ 2, − 4 − x2 ≤ y ≤ 4 − x2 , 0 ≤ z ≤ 4 − x2 − y2}
The triple integral over the bounded region E, where E = {(x, y, z) | -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, 0 ≤ z ≤ 4 - x^2 - y^2}, can be evaluated as ∫∫∫E dV = ∫∫∫E dx dy dz, where the limits of integration are -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, and 0 ≤ z ≤ 4 - x^2 - y^2.
To evaluate the triple integral over the region E, we can set up the integral as ∫∫∫E dV,
where dV represents the infinitesimal volume element. Since the region E is defined by specific bounds for x, y, and z, we can rewrite the integral as ∫∫∫E dx dy dz.
We integrate over the region E by performing the nested integrals with the appropriate limits of integration.
For this region, the limits are given as -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, and 0 ≤ z ≤ 4 - x^2 - y^2.
Thus, the triple integral over the bounded region E is ∫∫∫E dV = ∫∫∫E dx dy dz with the limits of integration -2 ≤ x ≤ 2, -4 - x^2 ≤ y ≤ 4 - x^2, and 0 ≤ z ≤ 4 - x^2 - y^2.
By evaluating this integral, we can determine the volume of the region E.
Learn more about triple integral here: brainly.com/question/30404807
#SPJ11
use a graphing utility to graph the curve represented by the parametric equations. indicate the direction of the curve. cycloid: x = 3( − sin()), y = 3(1 − cos())
To graph the curve represented by the parametric equations x = 3(−sin(t)) and y = 3(1 − cos(t)), we can use a graphing utility like Desmos or GeoGebra
The direction of the curve can be determined by observing the movement of the parameter t. As t increases, the curve moves in a counterclockwise direction. Similarly, as t decreases, the curve moves in a clockwise direction.
In the graph, the curve starts at the point (0, 0) when t = 0 and continuously moves in a loop, forming the characteristic shape of a cycloid. The curve repeats itself as t increases or decreases.
Please note that the scale of the graph may vary depending on the specific settings of the graphing utility used.
To learn more about graph click here:
brainly.com/question/32291843
#SPJ11
4. Brendan is building a dog house, and the dimensions of the roof are shown below. What is the lateral surface area of the roof? 3. 1 ft 3. 14 2. 7 ft 11 00 5 ft. 3 ft A. 24. 84 ft2 C. 54. 1 ft B. 46 ft2 D. 43. 2 ft?
The lateral surface area of the roof is 46 ft².
Given dimensions of the roof of a dog house are:3.1 ft 3.14 ft 2.7 ft 11.00 ft 5 ft 3 ft
Now, to calculate the lateral surface area of the roof of the dog house, we need to find the dimensions of the sides of the roof.As per the given dimensions, we can see that there are two sides with dimensions:3.1 ft x 2.7 ft5 ft x 2.7 ft
Now, the lateral surface area of the roof of the dog house can be calculated by adding the area of these two sides. Lateral surface area of the roof = 2 × (3.1 ft × 2.7 ft) + 2 × (5 ft × 2.7 ft) = 46.62 ft²
Therefore, the lateral surface area of the roof is 46 ft².
To know more about lateral surface area, click here
https://brainly.com/question/15476307
#SPJ11
When wrapping a gift, Chase wants to use as little paper as necessary. He only wants to cover each side specifically with no overlapping paper. Find out the specific amount of paper Chase needs to cover this gift. 7cm 13cm 4cm
The specific amount of paper Chase needs to cover this gift is √(480) square centimeters.
To find the surface area of a triangle, we can use Heron's formula, which states that the area of a triangle with side lengths a, b, and c can be calculated using the following formula:
Area = √(s * (s - a) * (s - b) * (s - c))
where s is the semi perimeter of the triangle, calculated as:
s = (a + b + c) / 2
In this case, the side lengths of the triangle are given as 7 cm, 13 cm, and 4 cm. Let's calculate the semi perimeter first:
s = (7 + 13 + 4) / 2
= 24 / 2
= 12 cm
Now, we can calculate the area using Heron's formula:
Area = √(12 * (12 - 7) * (12 - 13) * (12 - 4))
= √(12 * 5 * 1 * 8)
= √(480)
To know more about triangle here
https://brainly.com/question/8587906
#SPJ4
You won a scholarship, so you can choose from 12 universities, 4 summer camps, or 2 study abroad trips. How many ways can you choose to use your scholarship?
You have a total of 96 different ways to choose to use your scholarship, considering all the available options for universities, summer camps, and study abroad trips.
To determine the number of ways you can choose to use your scholarship, we need to consider the different options available for each category: universities, summer camps, and study abroad trips.
For universities, you have 12 options to choose from.
For summer camps, you have 4 options to choose from.
For study abroad trips, you have 2 options to choose from.
To find the total number of ways you can choose to use your scholarship, we multiply the number of options for each category together:
Total number of ways = Number of university options × Number of summer camp options × Number of study abroad trip options
Total number of ways = 12 × 4 × 2 = 96.
For more such questions on scholarship
https://brainly.com/question/30421719
#SPJ8
Two honey bees X and Y leave the hive H at the same time X flies 29m due south and Y flies 11m on a bearing of 113 degree. How far apart are they
The distance between the two honey bees is approximately 34.80 meters.
We can use the cosine law to find the distance between the two honey bees.
Let A be the position of bee X, B be the position of bee Y, and C be the position of the hive.
Then, we have AB² = AC² + BC² - 2AC × BC × cos(113°),
Here AB is the distance between the two bees, AC is the distance from the hive to bee X, and BC is the distance from the hive to bee Y.
Since bee X flies 29m due south, we have AC = 29.
Since bee Y flies 11m on a bearing of 113°, we have BC = 11.
Substituting these values into the formula gives :
AB² = 29² + 11² - 2 × 29 × 11 × cos(113°)
AB² = 841 + 121 + 249.28
AB² = 1211.28.
AB = 34.80
Therefore, the distance between the two honey bees is approximately 34.80 meters.
Learn more about the cosine rule here:
https://brainly.com/question/29717637
#SPJ1
An account paying 4. 6% interest compounded quarterly has a balance of $506,732. 32. Determine the amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity. A. $9,722. 36 b. $6,334. 15 c. $23,965. 92 d. $7,366. 99.
Therefore, the amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity is $7,366.99. Option (d) is correct.
An account paying 4.6% interest compounded quarterly has a balance of $506,732.32.
The amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity is $7,366.99 (option D). Explanation: An ordinary annuity refers to a series of fixed cash payments made at the end of each period.
A typical example of an ordinary annuity is a quarterly payment of rent, such as apartment rent or lease payment, a car payment, or a student loan payment. It is important to understand that the cash flows from an ordinary annuity are identical and equal at the end of each period. If we observe the given problem,
we can find the present value of the investment and then the amount that can be withdrawn quarterly from the account for 20 years, assuming an ordinary annuity.
The formula for calculating ordinary annuity payments is: A = R * ((1 - (1 + i)^(-n)) / i) where A is the periodic payment amount, R is the payment amount per period i is the interest rate per period n is the total number of periods For this question, i = 4.6% / 4 = 1.15% or 0.0115, n = 20 * 4 = 80 periods and A = unknown.
Substituting the values in the formula: A = R * ((1 - (1 + i)^(-n)) / i)where R = $506,732.32A = $506,732.32 * ((1 - (1 + 0.0115)^(-80)) / 0.0115)A = $506,732.32 * ((1 - (1.0115)^(-80)) / 0.0115)A = $7,366.99
Therefore, the amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity is $7,366.99. Option (d) is correct.
To know more about periods visit:
https://brainly.com/question/23532583
#SPJ11
Rishi's cousin is 2 years younger than twice the age of Rishi's brother. If the cousin is 16 years old, how old is the brother?
Carla is thinking about parallelograms and wondering if there is as many special properties for parallelograms as there are for triangles. She remembers that it is possible to create a shape that looks like a parallelogram by rotating a triangle about the midpoint of one of its sides.
It is possible to create a shape resembling a parallelogram by rotating a triangle around the midpoint of one of its sides.
Parallelograms do have several special properties, much like triangles. While triangles have a multitude of properties, such as Pythagorean theorem, congruence criteria, and the sum of angles equaling 180 degrees, parallelograms also possess distinct characteristics.
A parallelogram is a quadrilateral with opposite sides that are parallel and congruent. Some of the key properties of parallelograms include:
1. Opposite sides are parallel: This means that the opposite sides of a parallelogram never intersect and can be extended indefinitely without meeting.
2. Opposite sides are congruent: The lengths of the opposite sides of a parallelogram are equal.
3. Opposite angles are congruent: The measures of the opposite angles in a parallelogram are equal.
4. Consecutive angles are supplementary: The sum of two consecutive angles in a parallelogram is always 180 degrees.
By rotating a triangle around the midpoint of one of its sides, a parallelogram-like shape can indeed be created. This demonstrates that the properties of parallelograms can be related to those of triangles. However, it is important to note that while both triangles and parallelograms have their unique properties, they also have distinct characteristics that differentiate them from each other.
Learn more about parallelogram here:
https://brainly.com/question/28854514
#SPJ11
Find a parametrization of the surface. The first-octant portion of the cone
z= sqt (xsq +ysq) /2
between the planes z = 0 and z = 3.
To parametrize the surface of the first-octant portion of the cone between the planes z = 0 and z = 3, we can use cylindrical coordinates.
Let's denote the cylindrical coordinates as (r, θ, z), where r represents the distance from the z-axis, θ represents the azimuthal angle in the xy-plane, and z represents the height.
The equation of the cone in cylindrical coordinates can be written as:
z = √(r^2)/2
To restrict the cone to the first octant, we can set the ranges for the coordinates as follows:
0 ≤ r ≤ √(6)
0 ≤ θ ≤ π/2
0 ≤ z ≤ 3
Now, we can express the surface parametrically as:
x = r * cos(θ)
y = r * sin(θ)
z = √(r^2)/2
This parametrization satisfies the equation of the cone in the given range of coordinates. The parameter r varies from 0 to √(6), θ varies from 0 to π/2, and z varies from 0 to 3, covering the first-octant portion of the cone between the planes z = 0 and z = 3.
Therefore, the parametrization of the surface is:
(r * cos(θ), r * sin(θ), √(r^2)/2)
where 0 ≤ r ≤ √(6), 0 ≤ θ ≤ π/2, and 0 ≤ z ≤ 3.
Learn more about parametrize here: brainly.com/question/32388469
#SPJ11
Consider a scalar system dx .3 dt Compute the equilibrium points for the unforced system (u 0) and use a Taylor series expansion around the equilibrium point to compute the linearization. Verify that this agrees with the linearization in equation
Linearization obtained using the Taylor series expansion agrees with the linearization given in equation (5.33) where u = 0.
To find the equilibrium points of the unforced system
dx/dt = 1 - x³,
we set the derivative equal to zero,
1 - x³ = 0
Solving this equation, we find the equilibrium points,
x³ = 1
Taking the cube root of both sides, we get,
x = 1
So, the equilibrium point for the unforced system is x = 1.
To compute the linearization of the system around the equilibrium point,
we can use a Taylor series expansion.
The linearization is given by,
dx/dt ≈[tex]f(x_{eq} )[/tex] + [tex]f'(x_{eq} )[/tex] × [tex](x-(x_{eq} ))[/tex]
where f(x) = 1 - x³ and [tex](x_{eq} )[/tex] is the equilibrium point.
Let us calculate the linearization,
[tex]f(x_{eq} )[/tex] = 1 - [tex](x_{eq} )[/tex]³
= 1 - 1³
= 1 - 1
= 0
Now, calculate the derivative of f(x) with respect to x,
f'(x) = -3x²
Evaluate the derivative at the equilibrium point,
[tex]f'(x_{eq} )[/tex] = -3[tex](x_{eq} )[/tex]²
= -3(1)²
= -3
Now, substitute these values into the linearization equation,
dx/dt ≈ 0 - 3(x - 1)
⇒dx/dt ≈ -3x + 3
Comparing this linearization with equation (5.33),
dx/dt ≈ -3x + 3u
Therefore, the linearization obtained using the Taylor series expansion agrees with the linearization given in equation (5.33) where u = 0, which corresponds to the unforced system.
Learn more about Taylor series here
brainly.com/question/31767477
#SPJ4
The above question is incomplete, the complete question is:
Consider a scalar system dx/dt = 1 - x³ + u. Compute the equilibrium points for the unforced system (u = 0) and use a Taylor series expansion around the equilibrium point to compute the linearization. Verify that this agrees with the linearization in equation.(5.33).
an individual has been driving a passenger vehicle to work, averaging 6060 miles a week in a car that averages 2222 miles per gallon. the individual plans to purchase a hybrid vehicle that averages 5050 miles per gallon. if the individual drives to work 5050 weeks a year, how much gas will they save if they switch to a hybrid vehicle for their commute? responses
If the individual switches to a hybrid car, they will save approximately 8,021.24 gallons of gas in a year for their commute.
To determine how much gas the individual will save if they switch to a hybrid vehicle, we need to calculate the total amount of gas consumed by both the current car and the hybrid car.
First, let's calculate the total number of miles driven by the individual in a year:
Total number of miles driven = 6060 miles/week x 52 weeks = 315,120 miles
Next, let's calculate the total amount of gas consumed by the current car in a year:
Gas consumption of current car = Total number of miles driven / Miles per gallon of current car
= 315,120 miles / 22 miles per gallon
= 14,323.64 gallons
Now, let's calculate the total amount of gas that will be consumed by the hybrid car in a year:
Gas consumption of hybrid car = Total number of miles driven / Miles per gallon of hybrid car
= 315,120 miles / 50 miles per gallon
= 6,302.4 gallons
Therefore, the individual will save:
Gas saved = Gas consumption of current car - Gas consumption of hybrid car
= 14,323.64 gallons - 6,302.4 gallons
= 8,021.24 gallons
Learn more about gallon at: brainly.com/question/31702678
#SPJ11
determine whether the statement is true or false. if it is false, rewrite it as a true statement. if two events are mutually exclusive, they have no outcomes in common.
The statement is true. If two events are mutually exclusive, they have no outcomes in common. This means that the occurrence of one event excludes the possibility of the occurrence of the other event. In other words, both events cannot happen simultaneously.
For example, flipping a coin and rolling a die are mutually exclusive events because the outcome of one event does not affect the outcome of the other.
To further clarify, let's consider an example of two events that are not mutually exclusive. Let's say we are drawing a card from a deck of cards, and we are interested in two events: drawing a heart and drawing a face card. These two events are not mutually exclusive because there are face cards that are also hearts (e.g., King of Hearts). Therefore, the events have outcomes in common, and they can happen at the same time.
In summary, two events are mutually exclusive if they cannot happen at the same time and have no outcomes in common. It is an important concept in probability theory and is often used in calculating the probability of combined events.
Learn more about mutually exclusive events here:
https://brainly.com/question/28565577
#SPJ11