E) The most significant and prevalent greenhouse gas is water vapor. Ozone, carbon dioxide, methane, nitrous oxide, and other gases are also present.
Which major source of greenhouse gases is it?Over the past 150 years, almost all of the rise in atmospheric greenhouse gases has been caused by human activities. Burning fossil fuels for transportation, electricity, and heating is the primary human activity in the United States that contributes to the emission of greenhouse gases.
Which four greenhouse gases have the greatest impact?The greenhouse gases on Earth warm the planet by storing heat in the atmosphere. Carbon dioxide, methane, nitrous oxide, and water vapor—all of which are found naturally—as well as fluorinated gases—which are made—are the main gases that cause the greenhouse effect.
To learn more about water vapor here:
https://brainly.com/question/14529481
#SPJ1
If 25.0 mL of 15M nitric acid is diluted to 125 mL, what is the concentration of the new solution?
Answer:2.5M
Explanation:
let the number of moles = x
x/0.025L =15
x= 15*0.025 = 0.375 moles
the concentration of the new solution = moles / volume =
0.375 / (0.025+0.125) = 2.5M
What is the mass % of carbon in dimethylsulfoxide (C2H6SO) rounded to three significant figures? A) 7.74 B) 78.1 C) 25.4 D) 30.7 E) 28.6
The mass % of carbon in dimethyl sulfoxide (C2H6SO) rounded to three significant figure is calculated as 30.718%.
What is mass percentage?Mass percent of a solution is defined as the ratio of the mass of solute that is present in solution, relative to the mass of solution as a whole. To calculate mass percent of an element in a compound, we divide mass of the element in 1 mole of the compound by the molar mass and then multiply the result by 100.
As we know molar mass of carbon is 12 g/mol and molar mass of dimethyl sulfoxide is 78.13 g/mol
Mass % of carbon (C2) in dimethyl sulfoxide (C2H6SO) = 2* (12/78.13) * 100
= 30.718%
To know more about mass percent, refer
https://brainly.com/question/26150306
#SPJ4
Time Remaining 4 hours 45 minutes 24 seconds04:45:24 Check my workCheck My Work button is now disabledItem 15 Time Remaining 4 hours 45 minutes 24 seconds04:45:24 Protactinium-234 has a half-life of 1 minute. How much of a 400. g sample protactinium would remain after 4 minutes
After 4 minutes, 400 g of the sample would have decayed to 400 g - (200 g x 4) = 396.2 g.
What is protactinium?Protactinium (symbol Pa) is a rare, radioactive, metallic element in the actinide series of the periodic table. It has an atomic number of 91 and an atomic mass of 231. It is found in trace amounts in nature, but can be artificially produced in a nuclear reactor. Protactinium is a soft, silvery-gray metal that is soluble in acids and insoluble in bases. It has a high melting point and is moderately toxic. It has a variety of uses, including as a fuel source in nuclear reactors and in medical research.
After 4 minutes, 400 g of protactinium-234 would have decayed to approximately 396.2 g.
This is because the half-life of protactinium-234 is 1 minute, meaning that in one minute, half of the original amount (200 g) of the sample will decay.
To learn more about Protactinium
https://brainly.com/question/20313142
#SPJ4
what is the concentration of HCl solution if 20.4 mL of a 1 M NaOH solution was needed to completely react with 25 ml of hcl
The concentration of the HCl solution is 0.816 M (or 816 mM).
To determine the concentration of the HCl solution, we can use the balanced equation for the neutralization reaction between HCl and NaOH:
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
This reaction is a neutralization reaction, which means that the number of moles of H+ ions (from the HCl) is equal to the number of moles of OH- ions (from the NaOH).
Given that 20.4 mL of a 1 M NaOH solution was needed to completely react with 25 ml of HCl, we can use the volume and molarity of the NaOH solution to determine the number of moles of OH- ions:
Molarity = moles of solute/litres of solution
Moles of OH- = (20.4 mL x 1 M) / 1000 mL/L = 0.0204 moles
Since the number of moles of H+ ions is equal to the number of moles of OH- ions, we can use the number of moles of OH- to determine the number of moles of H+ ions:
moles of H+ = moles of OH- = 0.0204 moles
We can then use the number of moles of H+ ions and the volume of the HCl solution to determine the concentration of the HCl solution:
Molarity = moles of solute/litres of solution
concentration of HCl = moles of H+ / (25 mL / 1000 mL/L) = 0.0204 moles / 0.025 L = 0.816 M (or 816 mM)
Therefore, the concentration of the HCl solution is 0.816 M (or 816 mM).
Learn more about Neutralization Reaction here: https://brainly.com/question/28970253
#SPJ4
Which of the following alkenes cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water? X X II III DIVE, III and IV II &IX
Among the following alkenes (D) IV cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water.
An alkene must first be brominated by an addition reaction that produces a vicinal dibromide in order to transform it into an alkyne. All alkenes that have at least one double bond double substituted render them unsuitable for this method due to the requirement of this vicinal dibromide. This is so that the alkane can undergo a double elimination and produce an alkene, which needs at least one C-H and C-X bond. This hinders the conversion of molecule IV into an alkyne.
The dibromo alkane would change into the provided alkene by losing one unit of HBr if it were to react with bromine. However, the second beta-elimination cannot take place since there isn't hydrogen that is physically linked to the alkene carbon. So (D) IV is the right option.
You can also learn about dibromide from the following question:
https://brainly.com/question/11530316
#SPJ4
Determine the empirical and molecular formula of benzene which contains only carbon and hydrogen and is 7.74% hydrogen by mass. The molar mass of benzene is 78.1 g/mol.
The empirical and molecular formula of benzene is CH and C6H6 that contains only carbon and hydrogen and the mass of hydrogen is 7.74%.
Molar mass of benzene is = 78.1%
Hydrogen = 7.44%
We have to find empirical and molecular formula
We calculate the percentage of Carbon in the compound is as follow:
Percentage of compound = 100%
Hydrogen = 7.44%
We have find the percentage of carbon
Carbon = (Percentage of compound) - (Hydrogen)
= 100-7.44
= 92.56%
Calculate empirical formula:
Carbon (C) = 92.56% Hydrogen (H) = 7.44% Empirical formula = ?
Firstly, divide by their molar mass
C = 92.56 / 12 = 7.71, H = 7.44 / 1 = 7.44
Divide by the smallest
C = 7.71 / 7.74 = 1, H = 7.44 / 7.44 = 1
Empirical formula of benzene = CH
Calculate Molecular formula
Molecular mass of benzene = 78.1 g / mol. Empirical formula = CH, Molecular formula = ?
Molecular formula = Empirical formula X n
Molecular formula = molar mass
Therefore, Empirical formula x n = molar mass
[CH]n = 78.1, [12 + 1]n = 78.1,
13n = 78.1
Divide both sides by 13
n = 78.1 / 13
n = 6
Molecular formula = C6H6
To know more about benzene here
https://brainly.com/question/14525517
#SPJ4
the ka for hydrofluric acid is 7.2 x 10-4. this means that hf is
a weak acid. The Ka (acid dissociation constant) is a measure of the strength of an hydrofluoric acid in solution. It is defined as the equilibrium constant for the dissociation reaction of the acid in water,.
which is usually written as:
HA + H2O → H3O+ + A-
A lower Ka value indicates that the acid is a weak acid, meaning that it does not dissociate very well in water and thus has a low concentration of H3O+ ions. A higher Ka value indicates that the hydrofluoric acid is a strong acid, meaning that it dissociates very well in water and thus has a high concentration of H3O+ ions. Given that the Ka for hydrofluoric acid is 7.2 x 10-4, this means that hydrofluoric acid is a weak acid. This means that it does not dissociate very well in water and thus has a low concentration of H3O+ ions. It is a weaker acid than the strong acids like Hydrochloric acid, Sulfuric acid, Nitric acid and many others.
Learn more about Ka here:
https://brainly.com/question/1417688
#SPJ4
How many grams of magnesium
sulfate (MgSO4) are dissolved in
0. 965 L of a 0. 0575 M solution?
Molar Mass Mg: 24. 30 g/mol
Molar Mass S: 32. 06 g/mol
Molar Mass O: 16. 00 g/mol
Magnesium sulfate, or MgSO₄, weighs 6.68 g, and dissolves about 0. 965 L of the a 0. 0575 M solutions.
For what use in chemistry?A solution is created when a solvent and a solute, two different compounds, are mixed together. When a salt and a solvents is mixed, a solution is created. Commonly, one substance will dissolve in another to create a solution, such as when salt dissolves in water. Nevertheless, a solution can be produced under any state of matter.
Molar mass MgSO₄ = 120.36 g/mol
You have a 0.0575 M solution
That is equal to 6.9207 g/L or 0.0575 mol/L * 120.36 g/mol.
But you want mass in 0.965 L
Mass equals 0.965 L times 6.9207 g/L, or 6.68 g.
To know more about Solution visit:
https://brainly.com/question/25326161
#SPJ4
Classify the reaction in each of the following equations.
a. BaCl2 (aq) + K2CrO4 (aq) → BaCrO4 (s) + 2KCl(aq)
b. Si(s) + 2Cl2 (g) → SiCl4 (l)
Answer:
a) Double replacement
b) Synthesis
Explanation:
a) For A, we have two ionic reactants that form two ionic products, where the anion (or cation) is swapped. This is a characteristic of a double replacement reaction.
b) For B, two elements, this time two elements, react together to form one product that's unlike the reactants. This is a characteristic of a synthesis reaction.
Mg + _________HCI →
_____ H₂ + _____ MgCh
Mg + 2HCl → H2 + MgCl2 because The reaction between magnesium and hydrochloric acid produces hydrogen gas and magnesium chloride.
What is molecule?Molecules are the smallest unit of a chemical compound that can exist independently and remain unchanged in chemical composition. A molecule is composed of two or more atoms that are chemically bonded together. A molecule can be made up of different elements, such as carbon, hydrogen, oxygen, and nitrogen, and can be composed of a variety of combinations of these elements. Molecules are essential components of all living things, as they are important for basic functions such as energy transfer, metabolism, and cell structure.
To learn more about molecule visit:
brainly.com/question/475709
#SPJ1
Warm air rises because:
A.) It is made of helium
B.) As it warms the particles spread out making it less dense
C.) As it warms the particles get closer together making it more dense
D.) Air always moves towards the sun or moon due to gravity
As the air gets warmer it rises because, particles spread out making it less dense. The diffusing capability of gas molecules make it possible.
What is intermolecular forces ?Intermolecular force are the force that keep the particles of a substance binded together. Gaseous molecule easily diffuse in air , since the intermolecular attraction is very less in them.
In solid state molecules are densely packed and difficult to move apart. In liquid state , particles have some space to move and in gases molecules are far apart due to less intermolecular force.
As the gas molecules in air absorbs heat energy, they overcome all the intermolecular forces and will spread out in the air. Thus, they rises above over a temperature gradient.
Find more on intermolecular force:
https://brainly.com/question/9007693
#SPJ2
Which of the following statements correctly identifies the decomposition reaction and describes a substance involved
Option C. Decomposition reaction: a substance involved is oxygen.
A decomposition reaction is a type of chemical reaction in which a single compound breaks down into two or more simpler substances.Decomposition Reaction Involving OxygenA decomposition reaction is a type of chemical reaction where a single compound is broken down into two or more simpler substances. In the reaction, energy is typically used to break down the bonds that hold the molecules of the compound together. Oxygen is often a substance involved in the reaction, as it is used to provide the energy needed to break down the compound. When oxygen is involved, the reaction is sometimes referred to as an oxidation reaction.
Since the question is not complete, here's the full task:
Which of the following statements correctly identifies the decomposition reaction and describes a substance involved?
Choose the right option:
A. Combustion reaction: a substance involved is oxygen
B. Combustion reaction: a substance involved is a hydrocarbon
C. Decomposition reaction: a substance involved is oxygen
D. Decomposition reaction: a substance involved is a hydrocarbon
Learn more about decomposition reaction: https://brainly.com/question/27300160
#SPJ4
Show the more stable carbocation that forms through a 1. 2−shift. Be sure to answer all parts. Part 1 out of 2 Show the more stable carbocation that forms through a 1,2-shift.
Be sure to answer all parts. Part 1 out of 2 Show the more stable carbocation that forms through a 1,2-shift.
The more stable carbocation that forms through a 1,2-shift is a tertiary carbocation.
A 1,2-shift is a rearrangement of a carbon-carbon double bond, where one of the carbons moves two positions away from its original location with its original bonding partner following it. This creates a carbocation intermediate, with the carbon that moved being the positively charged center. Since tertiary carbocations are the most stable of the carbocation intermediates, the more stable carbocation that forms through a 1,2-shift is a tertiary carbocation.
The more stable carbocation that forms through a 1,2-shift is a tertiary carbocation.
learn more about carbocation here
https://brainly.com/question/13164680
#SPJ4
Why are incandescent light bulbs considered to be lower efficiency than LED bulbs?
#1: A greater percentage of the energy output of the incandescent bulb goes toward heat.
#2: A greater amount of energy is required for the same light output from the LED bulb.
#3: A smaller amount of energy is wasted by the incandescent bulb.
#4: A smaller percentage of the energy output of the LED bulb goes toward light.
A smaller amount of energy is wasted by the incandescent bulb.
Why are incandescent light bulbs less efficient?Because so much energy (90%) is used to produce heat instead of light, incandescent lights are the least efficient of all current lighting options.A typical incandescent source emits around 2% of its energy as usable visible light and the rest 98% as waste heat. Incandescent bulbs have a high likelihood of burning out regularly and need to be replaced annually.Incandescent bulbs are inefficient since they only produce 10% of light and 90% of heat. Additionally, incandescent lights don't last as long as CFLs and LEDs do. A 12-watt LED bulb lasts 25,000 hours, compared to 1,000 hours for an incandescent bulb, 10,000 hours for a CFL, and 15 hours for a CFL.To learn more about incandescent light bulbs refers to:
brainly.com/question/8979272
#SPJ1
Vines grow straight until they find something to grow around. What is
responsible for this adaptation?
Answer:
No matter how a seed is planted, the root will orient itself towards the pull of gravity in the downward direction. This is known as geotropism.
What are the factors affecting the state of a substance?
There are three main factors that affect the state of a substance: temperature, pressure, and the amount of substance.
Temperature: Temperature is a measure of the average kinetic energy of particles within a substance. As the temperature of matter increases, particles have more kinetic energy and move faster. This can change the state of matter from solid to liquid or from liquid to gas.
Pressure: Pressure is the force exerted on a substance per unit area. Applying pressure to a substance can change its state from gas to liquid or from liquid to solid.
Amount of Matter: The amount of matter in the system also affects its state. As the amount of matter in the system increases, the particles become more dense and the matter can change state from gas to liquid or liquid to solid.
Taken together, temperature, pressure and amount of matter are the three main factors that affect the state of matter. These factors can change the state of matter from solid to liquid, liquid to gas, or gas to solid.
Learn more about factors affecting the state of a substance here: https://brainly.com/question/1201207
#SPJ4
Spreadsheets are super helpful in helping you stay organized when calculating recipe costs because they have different rows and columns to track all your _____ individually and what they cost.
Question 1 options:
ideas
customers
ingredients
reviews
Question 2 (1 point)
Ryan is a baker who likely does what to his ingredients rather measuring them out with cups?
Question 2 options:
splitting up
sharing
weighing out
cultivating
Question 3 (1 point)
What company has a trade secret that claims to use "eleven herbs and spices," supposedly scribbled on a piece of yellow notepaper inside an iron safe in Louisville, Kentucky, and as the story goes, the safe is actually a vault surrounded by cameras, motion-detectors, and even guards!
Question 3 options:
Chik-Fil-A
Coca Cola
McDonald's
Kentucky Fried Chicken
Question 4 (1 point)
What kind of measuring device comes in sets, with each part of the set holding a pre-determined volume and increasing in size from ¼ to 1?
Question 4 options:
strain measuring spoons
conversion measuring spoons
tare measuring cups
standard measuring cups
Question 5 (1 point)
What kind of cups for measuring are sometimes made from glass or something transparent so the markings on the side with different measurements are visible?
Question 5 options:
graduated measuring cups
standard measuring cups
tare measuring cups
Maillard measuring cups
Question 6 (1 point)
Schools, hospitals, prisons, universities, summer camps, and government buildings are just a few examples of the types of institutions and commercial kitchens that depend on what kind of recipes on a daily basis?
Question 6 options:
trade secret recipes
small volume recipes
improvised recipes
standardized recipes
Question 7 (1 point)
As a big-time chef, your job entails nothing more than simply putting out spectacular food.
Question 7 options:
True
False
Question 8 (1 point)
Rice never loses its food value, regardless of how many times its rinsed.
Question 8 options:
True
False
Question 9 (1 point)
When a food cost analysis is properly done, it can serve as a tool to monitor your overall expenses so you can make a profit and stay within the confines of your budget.
Question 9 options:
True
False
Question 10 (1 point)
When looking for consistency and reliability, in cooking and other endeavors, it's far better to rely on what rather than guesswork?
Question 10 options:
intuition
hypotheses
numbers
estimates
Question 11 (1 point)
Most failing restaurants find themselves in trouble because they do not understand the what that is associated with what they are doing?
Question 11 options:
cost
time
resilience
integrity
Question 12 (1 point)
When adhering to the ABCs of eating when planning out your diet, ensuring that you are not too heavy on fat, salt, or sugar means that you are using what?
Question 12 options:
adequacy
moderation
variety
balance
Question 13 (1 point)
Inventory control provides predictable information on the quantity of ingredients needed for each _____ cycle.
Question 13 options:
revenue
standardized
nutrient
production
Question 14 (1 point)
As delightful as it is to design a delicious, exciting, and colorful menu, it is equally as important to see the hidden costs and risk behind every decision.
Question 14 options:
True
False
Question 15 (1 point)
What happens to ingredients through the process of trimming, cleaning, and cooking?
Question 15 options:
They shrink.
They grow.
They disintegrate.
They multiply.
Answer:
A-Ideas
Explanation:
0.25 moles of a gas at 760 mmHg and 298 K are contained in a 6.1 L bottle. What is the pressure of the system if the amount of gas in the bottle is reduced to 0.13 mole and the temperature is reduced to 100 K?
The pressure in the container can be calculated using Ideal gas law. The pressure of the gas at the reduced temperature will be 0.17 atm.
What is ideal gas law?Ideal gas law states the relation between volume, pressure, temperature and number of moles of a gas as written below:
PV = nRT.
Where R is the universal gas constant equal to 0.082 L atm/ K mol.
Given , T = 100 K
n = 0.13 moles
V = 6.1 L
Then, P = nRT/ V
The pressure of the gas at 100 K with 0.13 mole is calculated as follows:
P = (0.13 mole × 100 K × 0.082 L atm/ K mol) / 6.1 L = 0.17 atm.
Therefore, the pressure of the gas is 0.17 atm.
Find more on ideal gas law:
https://brainly.com/question/13821925
#SPJ1
The solid has a mass of 180 g. What is the density of the solid? Show your work. Be sure to use correct units of measurement. HELP NEEDED ASAP!!!!
Answer:
I'm telling the teacher on u man stop cheatingThe reaction of ethane gas C2H6 with chlorine gas produces C2H5Cl as its main product along with HCl. (In addition, the reaction invariably produces a variety of other minor products, including C2H4Cl2, C2H2Cl3, and others. Naturally, the production of these minor products reduces the yield of the main product.) (a) Write out the complete, balanced chemical reaction of main reaction taking place. (b) Calculate the percent yield of C2H5Cl if the reaction of 300. grams of ethane with 650. grams of chlorine produced 490. grams of C2H5Cl.
a) The balanced equation is :
C₂H₆ + Cl₂ ---> C₂H₅Cl + HCl
b) The percent yield is the 83.0 % %.
a) The balanced equation is given below :
C₂H₆ + Cl₂ ---> C₂H₅Cl + HCl
b) mass of the ethane = 300 g
molar mass of the ethane = 30 g/mol
moles of the ethane = 300 / 30
= 10 mol
mass of chlorine = 650 g
molar mass of the chlorine = 71 g /mol
moles = 650 / 71
= 9.15 mol
it is clear the the chlorine is the limiting reactant.
1 mole of the chlorine produces the 1 mole of the C₂H₅Cl
moles of the C₂H₅Cl = 9.15 mol
mass of the C₂H₅Cl = 9.15 × 64.5
= 590.175 g
The percent yield = (experimental yield / theoretical yield ) × 100 %
= ( 490 / 590 .175 ) × 100 %
= 83.0 %
To learn more about percent yield here
https://brainly.com/question/13068053
#SPJ4
a student collected a sample of hydrogen gas by the displacement of water. Calculate the number of molecules of water vapor in the sample of gas
Using a method known as water displacement, gases created during laboratory experiments are frequently collected. To obtain the accurate value of the gas's pressure .
The vapor pressure caused by water in a sample can be compensated for. The gas is not pure since it is combined with water vapor from evaporating water because it is gathered above water. By deducting the contribution of the water vapor, one may apply Dalton's law to determine how much of the desired gas is present: P total equals Pg plus PH 2O. The required gas's pressure is P g. Pg = P Total + P H 2 O List the known quantities and make a plan for the issue. pressure in the atmosphere. A water pan is filled with a bottle that has been turned upside down and filled with water. Rubber tubing that is attached to the reaction flask and supplied underneath the water bottle.
To learn more about pressure please click on below link
https://brainly.com/question/12971272
#SPJ4
You just created the equality 1 fluid oz = 29. 7 mL. Use this equality to determine how many ounces of water will be measured using the measuring cup introduced before Part A when making the cake.
Express your answer numerically in ounces to two significant figures
2 ounces of water will be measured using the measuring cup introducing before part A when making the cake.
Both units (that is, ml and ounces) are equal, meaning they measure the same quantity and can be converted to each other.
Given that:
1fluid oz = 29.7ml
Part A measurements are not shown. Therefore, we will explain using hypothetical values.
Let the amount of water measured with the measuring cup in part A be 10 ml.
The equivalent number of ounces (x) is calculated as follows:
1 fluid oz = 29.7ml
x = 10ml
By using equality
x * 29.7ml = 1 fluid oz * 10ml
By canceling common units
x * 29.7 = 10 fluid oz
Divide both sides by 29.7.
x = 0.3367 fluid oz
Approximate to the nearest half.
x = 0.5 fluid oz
This means that the equivalent amount of water is 0.5 ounces.
What if the measurement is 55mL.
We apply the same steps here also:
x fluid oz = 55ml
x *29.7 = 1 fluid oz * 55 ml
Divide both sides by 29.7
x = 2 fluid oz
This means that the equivalent amount of water is 2 ounces.
Learn more about equivalent visit:
brainly.com/question/1434279
#SPJ4
In this redox reaction, identify the element that was reduced. Fe2O3 3CO 2Fe 3CO2 A. C B. CO C. Fe D. FeO E. O
the element that was reduced in this redox reaction is Fe
A redox reaction, also known as an oxidation-reduction or redox reaction, involves the exchange of electrons between chemical entities (the atoms, ions, or molecules involved in the reaction). Redox reactions occur everywhere; they are involved in the burning of fuels, the rusting of metals, and even the processes of photosynthesis and cellular respiration.Some species experience oxidation, or the loss of electrons, while others experience reduction, or the gain of electrons, during a redox process. Take rust, which results from the interaction of iron and oxygen:The third selection from the options presented above is the right response. The element that was reduced in the described redox reaction was Fe, or iron. It now has a neutral charge after having its +3 charge lowered.
Learn more about redox reaction.
brainly.com/question/13293425
#SPJ4
Hello can you please help me?
here is my big question:
considering that in any part of the periodic Table of the Elements, if the element's position is higher and more to the right, its atomic radius is smaller. So our element has more metallic character. According to this point, if we consider the elements from iron to zinc, zinc is more reactive than iron and copper. So why is the reactivity of copper less than iron?
Answer:
because I'm the reactivity table of metals it shows that iron is indeed more reactive than copper
Explanation:
potassium (most reactive)
sodium
lithium
calcium
magnesium
aluminum
zinc
iron
tin
lead
hydrogen
copper
mercury
silver
gold( least reactive)
An oxygen-binding protein was purified from a mollusk. It was found to exhibit fluorescence, which means that it has amino acid residues that absorb light of one wavelength and then emit light of a longer wavelength. Generally, the more exposed these residues are to solvent, the greater their fluorescence intensity. When placed in a deoxygenated buffer solution, the protein's fluorescence was measured and assigned a value of 1.0. Then the amount of protein fluorescence was measured under various other conditions and expressed relative to the initial measurement. The results are summarized in the table. Which conclusion is supported by these results
The conclusion is supported by these results is binding of oxygen to the protein changes the protein's tertiary structure to a conformation that resists the effects of urea.
Simple definition of fluorescenceFluorescence is a property that some chemicals have that allows them to emit visible light after absorbing radiation that is typically invisible, like ultraviolet light.
Fluorescence is the name given to the process of electromagnetic radiation typically visible light emitting from a material as a result of atoms being excited. These excited atoms almost immediately (within 10⁻⁸ seconds) begin emitting again. In most cases, the initial excitation is brought on by the energy absorption of incident radiation or particles, like X-rays or electrons.
To know more about fluorescence visit:
https://brainly.com/question/24228588
#SPJ4
why the bond between hydrogen and oxygen in a water molecule is more polar than the bond between hydrogen and nitrogen in an ammonia molecule.
Since oxygen has a higher electronegative charge than hydrogen, the two bonds that are created will be polar covalent, which means that oxygen.
which has a higher electronegative charge, will have a partial negative charge, and hydrogen, which has a partial positive charge. Each water molecule has a small hydrogen charge that attracts neighboring oxygen atoms and negatively charged areas of other molecules. While holding water together and giving it intriguing features, the hydrogen bond between the hydrogen of one water molecule and the oxygen of another... For water, this is how it functions. Due to the molecule's bent structure, water (H 2 O) is polar. Most of the negative charge from the oxygen is indicated by the shape.
To learn more about electronegative please click on below link
https://brainly.com/question/17762711
#SPJ4
State what is meant by the term polarised (2 marks)
Explanation:
use to describe something that is complete opposite
Problems that can be caused by both the complete and incomplete
combustion of methane in a gas fire.
Answer:
carbon dioxide produced, or carbon monoxide, soot produced and Soot can cause breathing problems and it blackens buildings.
Explanation:
During complete combustion carbon and hydrogen combine with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). During incomplete combustion part of the carbon is not completely oxidized producing soot or carbon monoxide (CO).
CH4 + 2 Cl₂ →→ 4 HCl + C
4. Use the equation above to calculate how many moles of CH4 are required to
produce 3.6 moles of HCl. (2 pts)
By using given equation 0.9 moles of CH₄ are required to produce 3.6 moles of HCl.
In simple terms, what is a chemical reaction?The transformation of one or more reactants, also known as reactants, into one or more new products, also known as products, occurs during a chemical reaction.
Chemical reactions turn reactants into products by involving reactants in the process. As an illustration, when we breathe, oxygen is inhaled, and upon coming into contact with glucose, it reacts to create carbon dioxide, water, and energy.
Given chemical reaction:
CH₄ + 2 Cl₂ → 4 HCl + C
1 mole of CH₄ gives 4 moles of HCl
x moles of CH₄ gives 3.6 moles
x moles of CH₄ = 3.6/4
x moles of CH₄ = 0.9moles.
To know more about moles visit:
https://brainly.com/question/27926556
#SPJ1
A neon sign contains 2.01 x 10^25 atoms of gas. How many moles of neon are in the sign?
A neon sign contains 2.01 x 10^25 atoms of gas. 3.34 x 10^-3 moles of neon are in the sign.
What do you mean by mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
1 mole is equal to 6.023 × 10 ²³ molecules.
According to Avogadro's constant, in one mole, there are 6.02 x 10^23 atoms.
To calculate how many moles are in 2.01 x 10^21 atoms, you would divide it by the amount of atoms that fit in a mole.
2.01 x 10^21 atoms / 6.02 x 10^23
= 0.00334 moles,
= 3.34 x 10^-3 moles
Thus, A neon sign contains 2.01 x 10^25 atoms of gas. 3.34 x 10^-3 moles of neon are in the sign.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ1
Your question is incomplete, most probably your question was
A neon sign contains 2.01 X 1021 atoms of the gas. How many moles of neon are in the sign?
a1.21 X 1045 mole Ne
b3.34 X 10-3 mole Ne
c2.00 X 102 mole Ne
d12.10 X 102 mole Ne