Select the term which best defines the movement of an object against an opposing force. Select one: Work Energy Play Entropy

Consequently, the turntable's angular velocity when the elephant reaches its center is [tex]$1.459 \mathrm{rad} / \mathrm{sec}$[/tex]

The giant performs 37945.68J of work while walking to the center.

Using conservation of angular momentum

[tex]& I_1 \omega_1=I_2 \omega_2[/tex]

Where [tex]I_1[/tex] is equal to [tex]& \left(\frac{1}{2} M r^2+m r^2\right)[/tex]

Substitute the value in above equation we get,

[tex]& \left(\frac{1}{2} M r^2+m r^2\right) \omega_1=\left(\frac{1}{2} M r^2\right) \omega_2[/tex]

Notice that [tex]$I_2$[/tex] (moment of inertia for elephant) is zero as he is at the centre.

Given M is equal to 11 Mg.

where m is equal to 4.8Mg

While radius is given as 8.5m

Substitute the value in above angular momentum equation we get.

[tex]& \left(\frac{1}{2} \times 11000 \mathrm{~kg} \times(8.5 \mathrm{~m})^2+4800 \mathrm{~kg} \times(8.5 \mathrm{~m})^2\right) 0.15 \mathrm{rad} / \mathrm{sec}[/tex]

Further we get

[tex]\\=\left(\frac{1}{2} \times 1100 \times(8.5)^2\right) \omega_2[/tex]

[tex]& (39737.5+346800) 0.15=39737.5 \omega_2 \\& \omega_2=1.459 \mathrm{rad} / \mathrm{sec}[/tex]

Angular velocity of the turntable when the elephant reaches the center is [tex]$1.459 \mathrm{rad} / \mathrm{sec}$[/tex]

(b)

Work done is equal to change in rotational kinetic energy

[tex]\mathrm{W} & =\frac{1}{2} I_2\left(\omega_2\right)^2-\frac{1}{2} I_1\left(\omega_1\right)^2[/tex]

Substitute the value in above equation we get,

W=42294.23 - 4348.55

W=37945.68J

Work done by the jumbo in walking to the centre is 37945.68J

For such more question on Work done.

https://brainly.com/question/8119756

#SPJ4

Answer:

bro is that even an answer is tis a prank!!

Explanation:

Answer:

347.967868

Explanation:

Answer: 20.7 m/s.

Explanation: To find the speed of the car, we need to use the equation for centripetal force, which is:

Fc = m * a = m * v^2 / r

where Fc is the centripetal force, m is the mass of the car, a is the centripetal acceleration, v is the velocity of the car, and r is the radius of the turn.

We know that the coefficient of friction between the car and the road is 0.57

and it is the maximum speed, so the force of friction is equal to the centripetal force.

f = Fc = m * a = m * v^2 / r

f = μ * N = μ * m * g

so

m * v^2 / r = μ * m * g

where g is the acceleration due to gravity.

By substituting the known values into the equation, we get:

(1100 kg) * v^2 / (12 m) = (0.57) * (1100 kg) * (9.8 m/s^2)

Solving for v, we get:

v = sqrt((0.57 * 9.8 * 12 * 1100) / 1100)

v ≈ 20.7 m/s

To the nearest tenth, the speed of the car is 20.7 m/s.

The wave is vibrating in an unknown harmonic are:

a. This is the 4th harmonic, counting the fundamental as 1.

b. The tension in the string would be T = 0.742 N.

What is wave?
Wave is a type of energy transfer through a medium, such as water, air, or sound. It is a disturbance that is propagated in two directions, forming a continuous oscillation of particles in the medium. Waves transfer energy without transferring matter, and can travel long distances without losing energy. Wave motion is characterized by its wavelength, frequency, and amplitude. Wavelength is the distance between two corresponding points on a wave, frequency is the number of waves that pass a point in a given time, and amplitude is the maximum displacement of the particles from their rest position. Wave motion is important for many physical phenomena, including sound, light, and ocean waves.

To learn more about wave
https://brainly.com/question/25699025

#SPJ4

The magnitude of the total flux through the five non-shaded faces is 5 times the magnitude of the flux through a single face.

What does total flux mean?

Total flux is a measure of the overall rate of flow of a physical quantity, such as energy or particles, through a given surface or region. It is typically expressed as the total amount of the physical quantity that passes through the surface or region per unit time.In other words, total flux is a measure of the overall rate at which something is being transferred across a given area.

What does Magnatitude means?

Magnatitude is a term used to describe the strength or intensity of something, such as an emotion, a physical force, or an event. It is often used to describe the intensity of an earthquake, hurricane, or other natural disaster. In some cases, the term can also be used to describe the power of a person or group, such as the magnatitude of a leader's influence or the magnatitude of a corporation's reach.

Therefore, the magnitude of the total flux through the five non-shaded faces is 5 times the magnitude of the flux through a single face, or 5F, where F is the magnitude of the flux through a single face.

To know more about Total Flux,

https://brainly.com/question/26289097

#SPJ4

Working at 27 MHz is referred to as high-frequency (HF), and you won't be focusing it or employing horns or waveguides.

The antenna is most likely a dipole or monopole on the ground, and the wavelength is approximately 10 m. A radio carrier frequency utilized for radio control current operations is 27 MHz. The abbreviation "MHz" stands for megahertz, or one million cycles per second. Furthermore, the minimum wavelength will be 3 x 10 to 8 meters / 108 megahertz. Therefore, the FM wavelength will fall between 2.78 meters and 3.41 meters. Working at 27 MHz is referred to as high frequency (HF), and you won't be focusing it or employing horns or waveguides.

Learn more about current here-

https://brainly.com/question/21672734

#SPJ4

307.89 g ice at 0 ^\circ {\rm{C}} should she add toobtain a final temperature of 38 ^\circ {\rm{C}}

The associated with the motion power of the electrons in an item is measured by its temperature. The velocity of these particles likewise increases as the temperature rises. A thermometer or a temperature probe is used to determine the temperature.

The idea of heat conservation may be used to determine how much ice Marianne should put in the coffee. The energy gained by the melting ice is equivalent to the energy lost by the hot coffee.

The heat absorbed by the ice is given by the equation:

Q = mcΔT

where Q is the heat absorbed, m is the mass of the ice, c is the specific heat capacity of water (4.18 J/g*°C) and ΔT is the change in temperature (0 - 38 = -38°C).

The heat lost by the coffee is given by the equation:

Q = mcΔT

where Q is the heat lost, m is the mass of the coffee, c is the specific heat capacity of water (4.18 J/g*°C) and ΔT is the change in temperature (84 - 38 = 46°C).

We can put the two equations equal to one another and find the mass of the ice since the heat released by the coffee is equal to the heat absorbed by the ice:

m_ice * c * (-38) = m_coffee * c * 46

m_ice = m_coffee * 46 / (-38)

The mass of the coffee is given by the volume of coffee (230 mL) and the density of water (1 g/mL)

m_coffee = 230 mL * 1 g/mL = 230 g

so the mass of the ice needed is :

m_ice = 230 g * 46 / (-38) = -307.89 g

To know more about Temperature visit:

https://brainly.com/question/14633960

#SPJ4

The kinetic energy of the products of the decay depends on the masses of the products and their velocities.

Velocity is a vector quantity that measures the rate and direction of an object's movement. It is expressed in meters per second and is typically calculated with the formula distance divided by time. Knowing an object's velocity is useful for determining its speed, acceleration, and the total distance it has traveled. Velocity is one of the fundamental concepts in physics, which is why it is important to understand when studying the science.

If we assume that the decay occurs at rest, then the difference in the mass of the products and the parent nuclei is converted into kinetic energy. In this case, the mass difference is 0.06.

To know more about velocity click-
https://brainly.com/question/24445340
#SPJ4

The far point of a myopic person with a prescription of -4.00 D is the point at which the eye can focus clearly on objects without the aid of corrective lenses.

Object is an entity that possesses state and behavior. It can be physical or a virtual component. In programming, an object is a self-contained component which consists of both data and procedures/functions to manipulate the data. Objects can interact with other objects, and the interaction between objects forms the basis of object-oriented programming.

This point is approximately 4 meters (13 feet) away from the eye. The far point is the furthest point away from the eye at which a person with myopia can see clearly. In other words, the person with -4.00 D myopia can see clearly with their corrective lenses up to 4 meters away from them. Beyond that point, the person will need to use their corrective lenses to see clearly.

To know more about object click-

https://brainly.com/question/11929974

#SPJ4

You would need to survive the thermosphere: The temperature ( 2000° C or more), the cosmic radiation and even solar activities, low air pressure and low air molecule.

Between the mesosphere and the exosphere is the thermosphere. The word "thermo" refers to heat, and the layer's temperature can rise as high as 4,500 degrees Fahrenheit.

However, because there aren't enough gas molecules for you to get the heat from the thermosphere, hanging out there would make you exceedingly cold. Additionally, this indicates that there aren't enough molecules for sound waves to pass through.

Learn more about thermosphere here:

https://brainly.com/question/13497783

#SPJ1

For a given process at constant pressure, w is positive. this means that the process involves work being done by the system on the surroundings

Work (w) is a term used in thermodynamics to describe the transfer of energy from a system to its surroundings. The formula w = -PV determines how much work a system does on its surroundings while a process takes place at constant pressure. P represents the constant pressure, while V represents the system's volume change.

As long as the pressure remains constant, the effort will be directly proportional to the transpose in volume. The work the system performs on its surroundings changes from negative to positive as its volume increases, transferring energy from the system to its setting in the form of work. This is consistent with the statement that the process involves the system working on the environment.

Read more about work done on:

https://brainly.com/question/25573309

#SPJ4

As a result, from the homes of the shoppers to the restaurant, the distance is 12 km, and the direction is 80° north.

As the name implies, questions based on direction and/or distance are also known as Direction and Distance questions. Candidates must calculate the distance traveled between the starting location and the final / end point based on the provided starting point and direction. The position of one point and person with regard to another point and person and the distance among them must be determined for the Direction & Distance reasoning part.

Declare the terms "right" and "left." Ask the kids to tell you what these terms imply or mean when they are translated, then write their answers on the board with arrows pointing in the appropriate directions. Show the class how to pronounce the words once their meanings are obvious. Relative terminology, such as up, down, in, out, left, right, forward, backward, or sideways, can be used to define direction. You can also depict direction using the four cardinal directions: north, south, east, & west.

7km = 30 Degree of NE

5km = 50 degree of N

Therefore distance = 7km+5km

=12km

thus, direction = 50+30

=80° N

To know more about Direction visit:

https://brainly.com/question/13899230

#SPJ1

Moving magnetic fields cause electrons to be pulled and pushed. There are loosely held electrons in metals like copper and aluminum. By rotating a coil of wire around a magnet or vice versa, an electrical current is produced by pushing the wire's electrons.

To learn more about electrons, refer to:

https://brainly.com/question/860094

#SPJ1

None of the given options requires work to be done.

Does potential energy require work to be done?

Potential energy is a concept of the energy that results from the object's position; as a concept, it refers to the work you have to do to move the object from U=0.

How is potential energy related to work?

The potential energy U is equal to the work you must do against that force to move an object from the U=0 reference point to the position r. The force you must exert to move it must be equal but oppositely directed, and that is the source of the negative sign.

Does kinetic energy require work?

Kinetic energy is the energy an object has because of its motion. If we want to accelerate an object, then we must apply a force. Applying a force requires us to do work. After work has been done, energy has been transferred to the object, and the object will be moving with a new constant speed.

Thus, both kinetic and potential energy is not related to work. So, the correct option is D

To know more about potential and kinetic energy :

https://brainly.com/question/16886655

#SPJ4

The percentage of uncertainty in the distance of cepheids observed in galaxy 11%

Inversely related to the square of the observer-to-source distance, the intensity of light that a source emits to an observer. This demonstrates that the intensity of light grows with distance and is equal to a number multiplied by 1/d2.

The inverse square law => d = [tex]\sqrt{L/4\pi * b}[/tex]

L = luminosity

b = brightness

Cepheid 1 : d1 5.77 x 10^ 23 m

Cepheid 2: d2 5 x 10^23 m

Cepheid 3 : d3 4.78 x 10^23 m

Avaerge distance = d1 + d2+ d3/3 => 5.18 x 10^23m

Hence, the percentage of uncertainty in the distance

   => 5.77 x 10^ 23 - 5.18 x 10^23 / 5.18 x 10^23

  => 11%

As a multipurpose observatory, Hubble was created to study the universe in the visible, ultraviolet, and infrared spectrums. Over 40,000 cosmic objects have been analysed by the telescope thus far, giving scientists access to views they couldn't see from the ground.

Learn more about Hubble Space Telescope here:

brainly.com/question/28936743

#SPJ4

When rays enter medium 2, they are bent in the direction of the normal, therefore n2 > n1. However, when entering medium 3, rays are bent away from the normal, so n3>n2. So, n2 > n1 > n3.

Parallel beam of light refers to a collection of rays that are perpendicular to one another. Parallel light rays traverse medium 1 and medium 2 surfaces before entering medium 3. The Snell's rule only connects the refraction indices of the two media A and B to the angles I and r. As a result, n=sini/sinr is the refractive index of medium B in comparison to medium A. The frequency remains constant even when the speed of light changes when it moves from one medium to another (v=c/n). Thus, the light deviates.

To learn more about light click here https://brainly.com/question/15200315

#SPJ4

Electron configuration is the distribution of electrons of an atom in the atomic orbitals in the increasing order of their atomic energies.

As a result, the orbitals are filled in the following order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p

The electrons found in the outermost shell are referred to as

valence electrons. In contrast, the electrons found in the innermost shell or the lowest energy levels are called core electrons.

(A) The electron gain enthalpy is exothermic and is more than those required for dissociation and I.E of H

(B) If total heat of the reaction is negative , it is clear that the reaction proceed from left to right.

The ground-state electron configuration of a noble gas is ns2 np6

The noble gas elements' shells are completely filled, resulting in a stable electronic configuration. Hence, removing the first electron from the stable configuration necessitates a great amount of energy.

Thus, noble gases have a high ionization energy value.

Learn more about atomic orbitals  here :

https://brainly.com/question/28240666

#SPJ4

The speed of the car is 20 m/s. Therefore, Option D is correct

We know that Speed (S)= Distance (D) / Time (T)

Here, Distance (D)= 200 meters

Time (T) = 10 seconds

Therefore,

Speed= 200/10

Speed= 20m/s

Learn more about speed and distance at:

https://brainly.com/question/22242439

(a) The equation for the position as a function of time is x (t) = 14 cos(9.9t).

(b) The position of the spring at t = 0.25 s is -11 cm.

The angular speed of the spring is calculated as follows;

ω = √ ( k / m )

where;

ω = √ ( 490 / 5 )

ω = 9.9 rad/s

The equation for the position as a function of time is written as;

x (t) = A cos(ωt)

where;

x (t) = 14 cos(9.9t)

when the time, t = 0.25 s

x (0.25) = 14 cos ( 9.9 x 0.25 )

x (0.25) = -11 cm

Learn more about wave equation here: https://brainly.com/question/25699025

#SPJ1

(a) Tension in the rope = 1162.57 N

(b) Horizontal component of force = 965.74 N and the vertical component of force = 196.83 N

(c) Coefficient of static friction = Unknown

(a) To determine the tension the rope needs to support, we first need to find the force of gravity acting on the climber. We can use the equation:

F_gravity = m * g where,

F_gravity = 82.0 kg * 9.8 m/s^2 = 803.6 N

Next, we'll use trigonometry to find the force that the rope needs to support.

T = F_gravity * cos(25) + F_gravity * sin(35)

where T is the tension in the rope.

T = 803.6 N * cos(25) + 803.6 N * sin(35) = 607.63 N + 554.94 N = 1162.57 N

(b) To find the horizontal and vertical components of the force that the cliff face exerts on the climber's feet, we can use trigonometry.

F_horizontal = T * cos(25)

F_vertical = T * sin(25)

F_horizontal = 1162.57 N * cos(25) = 965.74 N

F_vertical = 1162.57 N * sin(25) = 196.83 N

(c) To find the minimum coefficient of static friction needed to prevent the climber's feet from slipping, we'll use the equation:

F_friction = friction_coefficient * F_norm where,

F_norm = F_vertical = T * sin(25) = 196.83 N

friction_coefficient = F_friction / F_norm = Unknown / 196.83 N

It's important to note that this is a simplified scenario and in a real-life scenario, the rope, angles, and forces will be changing, so the tension and the friction coefficient will be dynamic, this is just a snapshot of a specific scenario. Also, as the friction coefficient is unknown, we cannot calculate it without knowing the force of friction.

Learn more about friction here:

https://brainly.com/question/22438157

#SPJ4

The gas is undergoing an isothermal process, which is a process in which temperature remains constant. This process involves the gas expanding from a compressed state to a more expanded state.

What is gas?
Gas is a form of energy that is produced through the burning of fossil fuels, such as coal, oil, and natural gas. It is used to power many of the everyday things we use, including our cars, stoves, and furnaces. Gas is also used to generate electricity, as well as provide heat for homes and businesses. When burned, gas creates a number of pollutants, such as carbon dioxide, carbon monoxide, sulfur dioxide, and nitrogen oxides, which can have a negative effect on the environment. To reduce its environmental impact, gas should be used as efficiently as possible. This means using appliances with higher energy ratings and making sure that any maintenance needed is kept up to date. In addition, using renewable energy sources, such as solar and wind power, can help reduce the use of gas.

To learn more about gas
https://brainly.com/question/30117672

#SPJ4

The value of gOP7 in the units architects will use, in metersecond2 is calculated as 5.72 m/s^2.

Omicron Persei is triple star system in the constellation of Perseus. From parallax measurements that was taken during the Hipparcos mission, it is approximately 1,100 light-years (330 parsecs) from Sun.

We have available 2 conversion units.

5.24 flurg/m and 0.493 s/grom

I chose units to describe two conversions by making denominator equal to 1 in both cases, hence there are 5.24 flurgs per meter and 0.493 seconds per grom.

Now, it is given 7.29 flurg/grom^2 and we have to convert to m/s^2.

So, flurg/grom^2 / flurg/m

= flurg/grom^2 * m/flurg

= (m*flurg)/(grom^2 * flurg)

= m/grom^2

Now, 7.29 flurg/grom^2 / 5.24 flurg/m = 1.391221374 m/grom^2

Now, to convert from m/grom^2 to m/(s grom) using time conversion factor.

m/grom^2 / s/grom

= m/grom^2 * grom/s

= (m*grom)/(grom^2 * s)

= m/(grom * s)

As, 1.391221374 m/grom^2 / 0.493 s/grom

= 2.821950049 m/(grom s)

Similarly, 2.821950049 m/(grom s) / 0.493 s/grom

= 5.72403661 m/s^2

So, the value of gOP7 in metersecond2 = 5.72 m/s^2

To know more about omicrons, refer

https://brainly.com/question/10904292

#SPJ1

The time spent in air by the rocket is 6.74 seconds.

The time of motion of the rocket is the time spent in air by the rocket and it is calculated by applying the following formula.

t = √ ( 2h / g )

where;

Haven calculated the maximum height reached by the rocket as 55.56 m,  the time take for the projectile to fall to the ground is calculated as;

t = √ ( 2 x 55.56  / 9.8 )

t = 3.37 s

Total time spent in air = 2 x 3.37 s = 6.74 seconds

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

The radial distance between the 500 VV equipotential surface is 34.2 m, and the 1000 VV surface is 17.1 m .

What is distance ?

Distance is the overall distance that an object actually travels along its course. The displacement of an object between two points is the smallest straight-line distance between those two points, measured from one position to the other. The metric system is used to measure both displacement and distance (m).

What is equipotential surface  ?

When a surface has an equipotential potential, all of its points have the same electric potential. The charge will have the same potential energy at any location along the equipotential surface as a result.

V = k Q / r

(a) 500 V = (9 x 109 ) (1.90 x 10-6 ) / r1

     r1 = 34.2 m

and 1000 = (9 x 109 ) (1.90 x 10-6 ) / r2

  r2 = 17.1 m

distance between them = r1 - r2 = 17.1 m  

(B) for 1500 V

1500 = (9 x 109 ) (1.90 x 10-6 ) / r3

r3 = 11.4 m

distance = r2 - r3 = 5.7 m  

Therefore, radial distance between the 500 VV equipotential surface is 34.2 m, and the 1000 VV surface is 17.1 m .

Learn more about distance from the given link.

https://brainly.com/question/26550516

#SPJ4

To find the maximum and minimum velocities that the ball can have and still land in the trunk of the truck, we need to use the equations of motion for the horizontal and vertical positions of the ball as a function of time. Since the truck is moving away from the ball, the horizontal position of the ball will be given by:

x(t) = x0 + Vt - v0cos(θ)*t

Where x0 is the initial horizontal distance from the back of the truck to the ball, V is the velocity of the truck, t is the time, and v0 is the initial velocity of the ball.

Similarly, the vertical position of the ball will be given by:

y(t) = y0 + v0*sin(θ)*t - (1/2)gt^2

Where y0 is the initial height of the ball, v0 is the initial velocity of the ball, g is the acceleration due to gravity and t is the time.

We know that the ball will land in the trunk of the truck if the horizontal position of the ball is equal to the length of the trunk (L) at the same time that the vertical position of the ball is equal to the initial height of the ball (y0).

We can find the time of flight by setting y = 0,

t = (2v0sin(θ))/g

Now, we substitute this value of t and y0 = 0 in the equation of x(t) and equate it with L.

x0 + Vt - v0cos(θ)*t = L

We can solve this equation for v0 to get the initial velocity of the ball.

v0 = (L + x0cos(θ) - Vt)/(cos(θ) - t*sin(θ))

Finally, we know that the minimum and maximum initial velocities will correspond to the maximum and minimum values of sin(θ) and cos(θ). Since θ = 45°, we can find the maximum and minimum velocities as follows:

v0_max = (L + x0cos(45) - Vt)/(cos(45) - tsin(45))

v0_min = (L + x0cos(45) - Vt)/(cos(45) + tsin(45))

Note that in this case x0=5m, L=2.5m, θ=45°, V=9m/s, t = (2v0sin(45))/g and g is 9.8m/s^2

you can use these values to find out v0_max and v0_min.

Answer:

As 26.8 mph is equivalent to 12 m/s, it is a relatively fast speed for something you would throw with your hand.

The average person would have a hard time throwing objects at this speed without special training or equipment, There are athletes for example cricketers who can throw an object (ball) at 100-130 kph

The important thing to remember is that throwing an object from your hand requires no other external energy source, so it's primarily mechanical energy, which the human body can supply, and it can be improved with the right training and technique.

the speed and period  of a wave with a wavelength of 2.6 cm in water that is 0.85 cm deep is 28.8 cm/s and 0.09s respectively.

The wavelength, which will also apply to troughs, is the separation between two wave crests. The number of vibrations that pass over a specific place in a second is known as the frequency and is expressed in cycles per second (Hz) (Hertz).

v=[tex]\sqrt{gd}[/tex]

=> [tex]\sqrt{9.8 x 0.0085}[/tex]

=> 0.288m/s => 28.8 cm/s

f, frequency = velocity/wavelength = 1/period

             => 28.8/2.6 = 1/period

Period = 0.09s

A wavelength's frequency and energy (E) drop as it gets longer. These equations show that as the frequency increases, the wavelength decreases. The wavelength lengthens as the frequency drops. The two main categories of waves are electromagnetic and mechanical.

Learn more about wavelength here:

brainly.com/question/15319558

#SPJ4

One gigameter, or 1 Gm, equals one million billion billion billion nanometers, or nm. It is the equivalent length of one gigameter, but expressed in the alternative length unit of nanometers.

One nanometer is equal to one billionth of a metre in the International System of Units because the word "nano" stands for one billionth, or 10-9. Here are some illustrations to help you understand just how tiny that is: The thickness of a sheet of paper is 100,000 nanometers.

Similar to metres and centimetres, nanometers are a unit of length measurement. A nanometer is 0.000000001 or 10-9 metres, or one billionth of a metre. Greek for "dwarf" is the root of the word "nano." Objects with diameters between one and one hundred nanometers are referred to as nanoscale (nm).

One billionth of a metre is known as a nanometer (nm).

"Nano" is a prefix that literally meaning one billionth. One nanometer is equal to 0.000000001 m when written out.

To learn more about nanometers refer to:

https://brainly.com/question/30042816

#SPJ1