the accompanying diagram shows a kit that has been secured to skate in the ground with a 20-foot string. the kit is located 12 feet from the ground, directly over point X. what is the distance, in feet, between the skate and point X.

Answer:

  D. 24

Step-by-step explanation:

The 5-number summary of a data set includes ...

When the data are written in increasing order, they are ...

  23 23 24  27 27 28  30 30 30  33 34 35

The minimum is the first value on the list, 23.

The first quartile is the average of the two middle values in the lower half of the data set: (24+27)/2 = 25.5.

The median is the average of the two middle values: (28+30)/2 = 29.

The third quartile is the average of the two middle values in the upper half of the data set: (30+33)/2 = 31.5.

The maximum is the last value on the list: 35.

A. 29 is the median

B. 23 is the minimum

C. 31.5 is the 3rd quartile

D. 24 is not part of the 5-number summary

The length of side AC = 5 units

Missing sides of a right triangle can be solved using the Pythagoras theorem

From the given question

Length of side AB = 3 units

Length of side BC = 4 units

The length of side AC is calculated below

[tex]AC^2=AB^2+BC^2\\\\AC^2=3^2+4^2\\\\AC^2=9+16\\\\AC^2=25\\\\AC=\sqrt{25}\\\\AC=5[/tex]

Therefore, the length of side AC = 5 units

Learn more on missing sides of right triangles here: https://brainly.com/question/21970437

#SPJ1

Complete Question

The length of side ab is 3 units. the length of side bc is 4 units. the length of side ac is .......... units.

Answer:

A= 54

B=3

Step-by-step explanation:

I hope this helps!

Answer:

784 cats      Yikes !

Step-by-step explanation:

d/c = 3/8  

              3/8 = 294/c

                        c = 294 * 8/3 = 784 cats

The change in the area is represented by the expression ΔA = 9 · x + 4, where x is the original width of the rectangle.

By geometry we know that the area of a rectangle is equal to the product of its width (x) and length (y). Based on the statement, the original rectangle is equal to:

A = x · y

A = x · (2 · x - 3)

And the change in the area is:

A + ΔA = (x + Δx) · (y + Δy)

A + ΔA = x · y + Δx · y + Δy · x + Δx · Δy

ΔA = Δx · y + Δy · x + Δx · Δy

ΔA = (2 · x - 3) · Δx + Δy · x + Δx · Δy

ΔA = 2 · (2 · x - 3) + 5 · x + 10

ΔA = 9 · x + 4

To learn more on rectangles: https://brainly.com/question/15019502

#SPJ1

Using the formula for the distance between two points to find the side lengths, the perimeter of the polygon is of 25 units.

The perimeter of a figure is given by the sum of the side lengths of it's outside dimensions.

Suppose that we have two points, [tex](x_1,y_1)[/tex] and [tex](x_2,y_2)[/tex]. The distance between them is given by:

[tex]D = \sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

For this problem, the distances are given as follows:

Hence the perimeter is given by:

P = 3 + 2 x 5 + 2 x 6 = 25 units.

More can be learned about the perimeter of a figure at brainly.com/question/18610622

#SPJ1

The expected value of the number of people selected before and including the first time a woman has a turn is 1.6667 and the standard error is 0.7454.

It should be noted that the expected value will be:

1[p(x = 1)] + 2[p(x = 2)] + 3[p(x = 3)]

= 1(0.5) + 2(0.3333) + 3(0.1667)

= 1.6667

Var(X) = E(X²) - E(X)2

= 3.3335 & (1.6667)²

= 0.555611

The standard error will be:

= ✓0.555611

= 0.7454

Learn more about standard error on:

brainly.com/question/14467769

#SPJ1

Answer:

[tex]y=-\frac{3}{2}x + 6[/tex]

Step-by-step explanation:

For perpendicular lines, we use the same y-intercept. Though, to find the slope of perpendicular lines, we use opposite reciprocals. The opposite reciprocal of [tex]\frac{2}{3}[/tex] is [tex]-\frac{3}{2}[/tex].

Answer:

444

Step-by-step explanation:

There are 9 surfaces to this shape.  You find the area of each shape:

Bottom rectangle (16)(5) =80

Front rectangle (16)(4) = 64

Back rectangle (16)(4) = 64

Right side rectangle (5)(4) = 20

Left side rectangle (5)(4) = 20

Top right rectangle (10)(5) = 50

Top left rectangle (10)(5) = 50

Front top triangle (1/2)(16)(6) = 48

Back top triangle (1/2)(16)(6) = 48

The cost per person if number of students is 100 given the inverse variation is $46.75

C = k / n

where,

k = constant of proportionality

If n = 55 and C = $85

C = k / n

85 = k / 55

85 × 55 = k

4,675 = k

Find C if n = 100

C = k / n

= 4,675 / 100

C = $46.75

Learn more about inverse variation:

https://brainly.com/question/13998680

#SPJ1

Answer:

C = $46.75

Step-by-step explanation:

85 × 55 = k

4,675 = k

4675/100=46.75

therefore the answer is 46.75

What number would you multiply the second equation by in order to eliminate the x-terms when adding to the first equation?

It's 2 (to get - 4x & 4x + - 4x = 0)

What number would you multiply the second equation by in order to eliminate the y-terms when adding to the first equation?

It's 3 (to get 9y & - 9y + + 9y =0)

Hope this helps!

Answer: yes by SSS

hit the like button if it is correct :D

Answer:

[tex]\huge\boxed{\sf 8:32\ AM}[/tex]

Step-by-step explanation:

Woke up = 7:30 AM

Time to:

Altogether:

= 14 + 9 + 39 min

(As we know that, 1 hour = 60 minutes)

So,

Time he reached the school:

7 hr 30 min + 1 hr 2 min

Combine like terms

7 hr + 1 hr + 30 min + 2 min

OR

[tex]\rule[225]{225}{2}[/tex]

Paul woke up for school at 7:30 AM. He took 14 minutes to get ready, 9 minutes to finish his breakfast and 39 minutes to commute to school. At what time did he reach the school?

In this question we are asked to calculate the time paul reach the school.

Altogether time paul took to get ready, to finish his breakfast and to commute to school.

(14 + 9 + 39) minutes

→ (23 + 39) minutes

→ 62 minutes

Now we will convert minutes into hour.

62 ÷ 60

→ 1 hr 2 min

Now we will calculate the time he reached his school.

7 hr + 30 + 1 hr 2 min

[tex]\begin{array}{cc}7 \sf{hrs} \: & \: 30 \sf{min} \\ \underline{1 \: \sf{hr}} & \underline{2 \sf{min} } \\ \pmb{8 \sf{hrs}}& \pmb{32 \sf{min}}\end{array}[/tex]

He will reach the school at 8:32 AM.

Answer:

( 9, -12 )

Step-by-step explanation:

Mario's Math Tutoring

you have the midpoint

2, -5

use the midpoint formula

(x1+x2)/2 , (y1+y2)/2

to get the endpoint

x :

(-5+x2)/2 = 2

(-5+x2) = 4

-5+x2 = 4

x2 = 9

y:

(2+y2)/2 = -5

(2+y2) = -10

2+y2 = -10

y2 = -12

Thank you Mario!

The computation shows that the amount that will be charged will be $5.00 and $9.00 respectively.

When the customer has a 6 pound Chihuahua, the amount that will be charged will be $5.00.

When a customer has a 65 pound Labrador, the amount that will be charged is $9.00.

This is illustrated as the cost is based on the weights given.

Learn more about computations on:

brainly.com/question/4658834

#SPJ1

The relationship between the base of the cone and the angle of the plane that intersects the cone is that the plane must be at a 45 degree angle to the base of the cone. Thus, Option D is correct.

According to the statement

we have given that the to form a ellipse we use the base and angle of the cone, And we have to tell the relationship between them.

So, For this purpose, We know that the

An ellipse is a plane curve surrounding two focal points, such that for all points on the curve, the sum of the two distances to the focal points is a constant.

And to make a ellipse the relationship between the base of triangle and the angle of the cone is that the

The plane must be at a 45 degree angle to the base of the cone.

By this way we make a ellipse with the help of the cone.

So, The relationship between the base of the cone and the angle of the plane that intersects the cone is that the plane must be at a 45 degree angle to the base of the cone. Thus, Option D is correct.

Learn more about ellipse here

https://brainly.com/question/16904744

Disclaimer: This question was incomplete. Please find the full content below.

Question:

To form an ellipse, what is the relationship between the base of the cone and the angle of the plane that intersects the cone?

A. The plane is parallel to the base of the cone..

B. The plane may be perpendicular to the base of the cone..

C. The plane is at an angle that is neither parallel nor perpendicular to the base of the cone.

D. The plane must be at a  angle to the base of the cone.

#SPJ1

Answer:

The plane is at an angle that is neither parallel nor perpendicular to the base of the cone.

Step-by-step explanation:

The plane doesn't need to be at an exact angle of 45 degrees. The most important thing is that the angle isn't parallel or perpendicular to the base of the cone, but it has to be non-zero without intersecting the base itself. It also only intersects one of the cones when looking at a double-cone.

The population would be set of all Christians of that particular church from where the random samples is collected.

According to the questions,

A study was performed with a random sample 3000 people from one church. In order to find appropriate population for generalizing conclusions

The population would be set of all Christians of that particular church from where the random samples is collected.

Hence, the population would be set of all Christians of that particular church from where the random samples is collected.

Learn more about random samples here

https://brainly.com/question/17040012

#SPJ4

Ava bought [tex]7.73[/tex] pounds of fruit for a class party , class ate [tex]3.59[/tex] pounds fruits then [tex]4.14[/tex] pounds fruit left after party.

How can we find how much fruit is left after party ?

Ava bought [tex]=7.73[/tex] pounds fruit

ate by class [tex]=3.59[/tex] pounds fruit

fruit left after party [tex]= total fruit -fruit ate by class[/tex]

                                [tex]= 7.73-3.59\\=4.14[/tex]

So [tex]4.14[/tex] pound fruit is left .

Learn more about the fruit left here :

https://brainly.com/question/28048819

#SPJ4

The greatest Common factor of monomials  [tex]33c[/tex]  and  [tex]27c^4[/tex] is  [tex]3c[/tex]

How we can find the GCF of monomials ?

Monomials are [tex]33c[/tex] and [tex]27c^4[/tex]

We can write the monomials in fraction form

[tex]33c=11*3*c[/tex]

[tex]27c^4=3*9*c*c*c*c[/tex]

----------------------------------

So we can see the common factor is [tex]3c[/tex]

The Greatest Common Factor of [tex]33c ,27c^4[/tex] is [tex]3c[/tex]

Learn more about the GCF here:

https://brainly.com/question/28048815

#SPJ4

Answer: Width is 7 inches, length is 15 inches.

Step-by-step explanation:

Let the width be w. Then, the length is w+8.

[tex]2(w+w+8)=44\\\\w+w+8=22\\\\2w+8=22\\\\2w=14\\\\w=7\\\\\implies l=15[/tex]

Answer:

A) Equation of the line of best fit: y = -5x + 62

B) y = -3

Explanation:

Given points: {(5, 38), (6, 34), (7, 27), (8, 21), (9, 17), (10, 14)}

Plot these points on the graph and draw a straight line between them.

A)

The points (7, 27), (9, 17)

Find slope:

[tex]\sf slope: \dfrac{17-27}{9-7} = -5[/tex]

Equation:

[tex]y - y_1 = m(x - x_1)[/tex]

[tex]\sf y - 27= -5(x - 7)[/tex]

[tex]\sf y = -5x + 35 + 27[/tex]

[tex]\sf y = -5x + 62[/tex]

B) If x = 13, then approximate value of y is

insert x = 13 in equation

y = -5x + 62

y = -5(13) + 62

y = -3

The answers are :

A) y = -5x + 64

B) -1

Part (A) :

Finding the slope : Take the points (6, 34) and (10, 14)

m = Δy/Δx

m = 14 - 34 / 10 - 6

m = -20/4

* m = -5 *

Using point slope formula to find equation :

y - y₁ = m (x - x₁)

y - 34 = -5 (x - 6)

y - 34 = -5x + 30

y = -5x + 64

Part (B) :

Substitute x = 13 in the line of best fit equation

y = -5(13) + 64

y = -65 + 64

y = -1

The area of the convex polygon is 43/2 square units

The vertices are given as:

(0,5), (-1,2), (4,4), (-3,-4) and (2,0)

The area is then calculated as:

[tex]A = \frac 12(\left[\begin{array}{cc}x_1&x_2\\y_1&y_2\end{array}\right] + \left[\begin{array}{cc}x_2&x_3\\y_2&y_3\end{array}\right] + ....+\left[\begin{array}{cc}x_n&x\\y_n&y\end{array}\right] )[/tex]

So, we have:

[tex]A = \frac12 * (|-1 * 5 - 2 * 0 + 0 * 4 - 5 * 4 + 4 * 0 - 4 * 2 + 2 * -4 - 0 * -3 -3 * 2 + 4 * 1|)[/tex]

Evaluate

[tex]A = \frac12 * (|-43|)[/tex]

Remove the absolute bracket

[tex]A = \frac12 * 43[/tex]

This gives

[tex]A = \frac{43}2[/tex]

Hence, the area of the convex polygon is 43/2 square units

Read more about convex polygon at:

https://brainly.com/question/14522707

#SPJ1

Answer: 18.6 feet

Step-by-step explanation: Horizontal distance = 17 feet and the angle

of elevation = 24°

The number of teams she can make is 10.

Division is the process of putting a number into equal groups using another number. The sign used to denote division is ÷. Division is one of the basic mathematical operations. Other basic mathematical operations include addition, subtraction, multiplication.

The number of teams that can be made can be determined by dividing the total number of friends by the total number of players in each team. The whole number that is derived from the division process is the number of teams teams that can be made given the total number of friends and the number of people that have to be in each group.

Number of teams she can make = total number of friends / number of people in each group

31 / 3 = 10 remainder 1

So, only 10 teams can be made. one person would not be on any team.

To learn more about division, please check: https://brainly.com/question/13281206

#SPJ1

The p-value(0.0538) is greater than the given significance level of 0.01. So, there is no sufficient evidence to show that the manufacturer needs to recalibrate the machines.

The test statistics formula for finding the z-score is,

z = (X - μ)/(σ/√n)

Where,

X = sample mean

μ = population mean

σ = population standard deviation

n = sample size

With this z-score, the p-value is calculated. If p > α, then the null hypothesis is not rejected, and if p < α, then the null hypothesis is rejected.

It is given that,

The population mean μ = 4.00

The sample size n = 81

The sample mean X = 3.97

The standard deviation σ = 0.14

and the significance level α = 0.01

So, the hypothesis is:

The null hypothesis: H0: μ = 4

The alternative hypothesis: Ha: μ ≠ 4

Thus, the test statistic value is,

z = (X - μ)/(σ/√n)

  = (3.97 - 4)/(0.14/√81)

  = - 0.03/0.015

  = -1.928

So, for z = -1.928, the p-value is 0.053855

Since p > 0.01, there is no sufficient evidence to show that the manufacturer needs to recalibrate the machines.

Learn more about hypothesis testing here:

https://brainly.com/question/23161548

#SPJ4

Answer:The answer is A

Step-by-step explanation:

An action that would not interfere with the airflow patterns at the front opening of the biosafety cabinet is a researcher discarding waste within the biosafety cabinet to prevent the movement of their arms in and out of the front opening.

It should be noted that biosafety simply means the use of safety equipment as specifically designs tools to ensure that people are protected from hazards.

In this case, when a researcher discards waste within the biosafety cabinet to prevent the movement of their arms in and out of the front opening, it won't interfere with the airflow pattern.

Learn more about biosafety on:

brainly.com/question/10102225

#SPJ1