The electric field is measured for points at distances r from the center of a uniformly charged insulating sphere that has volume charge densi

Answer:

A,B,C

Explanation:

because that is true

Answer:

The apparatus would need to be extremely delicate because of the very small values being measured, the gravitational attraction of two massive objects.

(I) the torsion constant, measuring the deflection of massive objects would be very small and difficult to measure accurately

(II) since all surrounding objects are massive, it is difficult to remove the effect of such objects from forces being measured

(III) to consider a massive object as having all of its mass at its center, the massive object would need to be uniform throughout - any nonuniformity of the object would affect the calculations

(IV) all physical measurements would need to be made with utmost accuracy because of the relatively small distances involved with regard to the extremely small force being measured

(V) today laser measurements would assist in measuring small deflections accurately

Answer:

That is a very broad question. One thing that does not seem to be considered is the depletion of the ozone layer at high altitudes.

In the 1960's chlorofluorcarbons (CFC,s) became popular as refrigerants, spray can propellants, etc.  In January 1989 the Montreal Protocol was passed which has greatly reduced the use of these substances. However, it may be several decades before the ozone layer can be replaced and again absorb harmful ulraviolet rays that may be partly responsible for the increase in global warming.  

(One chlorine atom at high altitudes can be responsible for the destruction of 100,000 molecules of ozone - catalytic reaction)

The person applying a greater pressure to the box is Cindy since it takes her a lesser  time to move the box up the hill.

The term pressure is defined as the force per unit area. WWe know that the magnitude of force applied is shown by the time taken to push the box up the hill.

Since Cindy pushes the box up the hill in only five seconds, it means that Cindy is applying a greater pressure to the box.

Learn more about pressure: https://brainly.com/question/356585

Answer:

you divide the distance by the time it takes to travel that same distance, then you add your direction to it.

Answer:

Voltage and current sources are two different sorts of sources that may be found in an electrical network. A voltage source has an emf forcing function, whereas a current source has a current forcing function.

☆ ------ ☆ ------ ☆ ------ ☆ ------ ☆

Answer:

m = 100 kg

Explanation:

F = ma

120 = m × 1.2

m = 120 ÷ 1.2

m = 100 kg

The current required in the windings of the given long solenoid that has 1580 turns uniformly distributed over the length of the solenoid is 1.98 A.

The magnetic field at the center of a solenoid is given by the following formula,

B = μ₀nI

where;

I = B/μ₀n

I = (0.00394) / (4π x 10⁻⁷ x 1580)

I = 1.98 A

Thus, the current required in the windings of the given long solenoid is 1.98 A.

Learn more about current in solenoid here: https://brainly.com/question/17086348

a) The frequency of the wave is 4.0 Hz

b) The period T of the wave is 0.25s

c) The speed of the wave is 12m/s

Given the data in the question;

Frequency is simply the number of occurrences of a repeating phenomenon per unit time.

Period is the time needed for a complete cycle of vibration to pass a given point.

It is expressed as;

[tex]T = \frac{1}{f}[/tex]

Where f is the frequency

Speed is simply the distance traveled in a given interval of time or time ratio.

It is expressed as;

[tex]v = \lambda * f[/tex]

Where [tex]\lambda[/tex] is wavelength and f is frequency

a) Frequency

We said frequency is the number of occurrences of a repeating phenomenon per unit time.

Since the wave oscillates 4.0 times a second

Hence, the frequency of the wave is 4.0 Hz

b) Period

[tex]Period\ T = \frac{1}{f} \\\\Period\ T = \frac{1}{4.0Hz}\\\\Period\ T = \frac{1}{4.0s^{-1}}\\\\Period\ T = 0.25s[/tex]

Therefore, the period T of the wave is 0.25s

c) Speed

[tex]v = \lambda * f\\\\v = 3.0m * 4.0Hz\\\\v = 3.0m * 4.0s^{-1}\\\\v = 12ms^{-1}\\\\v = 12m/s[/tex]

Therefore the speed of the wave is 12m/s.

Learn more about speed, wavelength and frequency: https://brainly.com/question/27120701

Answer:

The foil makes the microwave spark it can smoke up and catch fie.

Explanation:

-The aluminum foil's sharp edges are what causes the fire, smoke, and sarks.

- Hope This Helps!

-Justin:)

Answer:

itll spark and catch fire

Explanation:

Astronomers suspected an eighth planet beyond Uranus because of the irregularities in the motion of Uranus suggested that gravity from another planet was affecting it.

It should be noted that an astronaut simply means an individual who is trained to travel in spacecrafts.

In this case, astronomers suspected an eighth planet beyond Uranus because of the irregularities in the motion of Uranus suggested that gravity from another planet was affecting it.

In mid-1800s, astronomers used the orbits of most asteroids to predict where a planet would have to be.

Learn more about astronaut on:

https://brainly.com/question/2314879

Answer:

The just-noticeable concept.

Explanation:

Answer:

a particular level of electical potential from a power source

Now

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{8\times 10^{-5}}[/tex]

[tex]\\ \rm\rightarrowtail \nu=0.125(10^5)[/tex]

[tex]\\ \rm\rightarrowtail \nu=12500s^{-1}[/tex]

[tex]\\ \rm\rightarrowtail \nu=12500Hz[/tex]

Answer:

ADD ALL THEM AND ANSER WILL BE THERE 19.O

Explanatio

The time taken by the runner to do the work is 1.42 seconds.

Given the data in the question;

Power can be simply referred to as the quantity of energy transferred per unit time.

It is expressed as;

[tex]P = \frac{W}{t}[/tex]

Where W is work done and t is time elapsed.

To determine the time it took the runner to do the work, we substitute our given values into the expression above.

[tex]P = \frac{W}{t} \\\\t = \frac{W}{P} \\\\t = \frac{457J}{321W} \\\\t = \frac{457 kgm^2/s^2}{321 kgm^2/s^3}\\\\t = 1.42s[/tex]

Therefore, the time taken by the runner to do the work is 1.42 seconds.

Learn more about Power and Work: https://brainly.com/question/2962104

Distance is the factor that decreased the sound intensity.

As a sound wave carries its energy through a  medium, the intensity of the sound wave decreases with increasing distance from the source.

So we can conclude that distance is the factor that decreased the sound intensity.

Learn more about sound here: https://brainly.com/question/9349349

#SPJ1

By a factor of 1/9, the sound intensity decreased at 3 meters. Option A is correct,

Sound intensity is inverse proportional to the square of the distance.

The intensity of the sound is;

[tex]\rm I = \frac{1}{d^2} \\\\ \rm I = \frac{1}{3^2} \\\\ I=\frac{1}{9}[/tex]

By a factor of 1/9, the sound intensity decreased at 3 meters.

Hence, option A is correct,

To learn more about the sound intensity refer;

https://brainly.com/question/15089336

#SPJ1

Answer:

Explanation: “Every action has an equal opposite reaction” is Newton’s third law. So in this situation, kicking the soccer ball is the action and the reaction is it rolling.

Answer:

you push against the ball and the ball pushes back at you

Your force->|<- ball's force

Explanation:

For every action, there is an equal and opposite reaction

Answer: 1.51 km

Explanation:

Coulomb's Law: The electrostatic force between two charge particles Q: and Q2 is directly proportional to product of magnitude of charges and inversely proportional to square of separation distance between them.

Or,   [tex]\vec{F}=k \frac{Q_{1} Q_{2}}{r^{2}}[/tex]

Where Q1 and Q2 are magnitude of two charges and r is distance between them:

Given:

Q1 = Charge near top of cloud = 48.8 C

Q2 = Charge near the bottom of cloud = -41.7 C

Force between charge at top and bottom of cloud (i.e. between Q: and Q2) (F) = 7.98 x 10^6N

k = 8.99 x 109Nm^2/C^2

So,

[tex]\begin{aligned}&7.98 \times 10^{6}=\left(8.99 \times 10^{9} \mathrm{Nm}^{2} / \mathrm{C}^{2}\right) \frac{48.8 \mathrm{C} \times 41.7 \mathrm{C}}{\mathrm{r}^{2}} \\&r=\sqrt{\frac{1.8294 \times 10^{13}}{7.98 \times 10^{6}}}=1.514 \times 10^{3} \mathrm{~m}=1.51 \mathrm{~km}\end{aligned}[/tex]

Therefore, the separation between the two charges (r) = 1.51 km

Answer:

C. Stimulus = temperature, response = sweat

Explanation:

So basically, stimulus means cause and response means effect.

So, the cause in this case is temperature, while the response to the temperature is sweating.

Answer:

F t = m Δv         impulse delivered = change in momentum

Δv = 100 * .1 / .5 = 20 m/s     original speed of puck

KE = 1/2 m v^2 = .5 * 20^2 / 2 = 100 J     initial KE of puck

E = μ m g d        energy lost by puck

Ff = μ m g = m a      deceleration of puck due to friction

a = μ  g = 9.8 * .2 = 1.96 m/s^2

v2 = a t + v1 = -1.96 * 4 + 20 = 12.2 m/s     speed of puck on striking box

m v2 = M V       conservation of momentum when puck strikes box

V = m v2 / M = 12.2 * .5 / .8 = 7.63 m/s     speed of box after collision

KE = 1/2 M V^2 = .8 * 7.63^2 / 2 = 23.3 J     KE of box after collision

KE = μ M g d     energy lost by box in sliding distance d

d = 23.3 / (.3 * .8 * 9.8) = 9.91 m     distance box slides

(1) The image of an object placed further from the lens than the focal point will be upside down and smaller than the object.

(2) When light rays reflect, they bounce back.

(3)  Images formed by a concave lens will look magnified.

(4) When light rays enter a different medium, they bend.

The image of an object placed further from the lens than the focal point will be diminished and inverted.

Thus, the correct answer will be "upside down and smaller than the object".

The ability of light to bounce back when it strike a hard surface is known as refection.

A concave lens is diverging lens is usually virtual, erect and magnified.

The change in speed of light when it travels from medium to another medium is known as refraction. Refraction is also, the ability of light to bend around obstacles.

Learn more about reflection and refraction of light here: https://brainly.com/question/1191238

Answer:

It is upside down and larger than the object

They bounce back

Magnified

They bend

Explanation:

Answer:

Ohm’s law states that the current flowing through a conductor is directly proportional to the potential difference ( Voltage ) between the terminals of the conductor, provided that, factors such as the temperature of the conductor is kept constant

V = IR, where R is the proportionality constant.

R = resistance (measured in ohms)

V = voltage (measured in volts)

I = current (measured in amps)

Answer:

It will cool down and become a cold black dwarf.

Explanation:

The electron degeneracy pressure slowly overwhelms gravity, and the white dwarf evaporates. As gravity overwhelms the electron degeneracy pressure, it will explode as a nova.

Answer:

B. 240Ω

Explanation:

The formula between voltage, current and resistance is:

voltage = current × resistance

So resistance = voltage ÷ current

Therefore resistance = 120 ÷ 0.5

Resistance = 240Ω

Answer:

PV = nRT

Explanation:

The Ideal Gas Equation shows the relation between 4 factors :-

⇒ R is the molar gas constant included so they are equal to each other, without it, they would just be proportional

The equation :-

⇒ PV = nRT

Answer:

2 kg

Explanation:

K.E. = 1/2 m v^2

81   = 1/2  m (9^2)

1 = 1/2 m

m = 2 kg

Explanation:

Transverse wave

Longitudinal wave

Explanation:

formation of compounds because the electric forces compel the atoms to attract each other and formed bonds which leads to the formation of chemical compounds. The attractive or repulsive interaction between any two charged bodies is known as an electric force so the attraction between two opposite charged atoms causes the formation of compounds so we can conclude that electric forces are important for the formation of compounds.