The figure shows the electric field lines near two charges q1 (red, on the left) and q2 (blue, on the right)

According to the satellites' orbits and the speed at which they move, it either happens frequently or always.

As we begin to examine satellite orbits, we find that a circular orbit places the satellite always perpendicular to the object's net force and speed.

The orbit is stretched, just like in elliptical orbits. This informs us that the orbit has four points. As a result, the satellite rarely faces the satellite's net force in a perpendicular direction.

Rarely and always for elliptical orbits. According to the satellites' orbits and the speed at which they move, it either happens frequently or always.

Learn more about speed here-

https://brainly.com/question/28224010

#SPJ4

Answer:

The heat from the radioactive processes within the planets inferior causes the plates to move sometimes away from each other. This movement is called the tectonic shift

Accounting for things like how many team members should be assigned to a task, how many resources are required, how many hours tasks will take and more.

When the effort arm is longer than the load arm, there is a significant mechanical advantage.The lever is made up of two “arms”: The load arm (also known as the output arm) is the portion of the lever that is directly attached to the load. The effort arm (or applied force arm) is the section of the lever to which the effort, or input force, is applied.

A= W P = 1 , Where W represents the load and P represents the effort. So, if we utilize one fixed pulley to raise the weight, the effort required will be 50 k g w t in one direction.

To learn more about Effort to refer:

https://brainly.com/question/2141317

#SPJ1

For the Direct free kick, the game restarted.

There are two different kinds of free kicks used in soccer: direct and indirect.The term "direct free kick" refers to a kick that can be used as a direct strike.Indirect free kicks require a second touch before the ball can be used as a shot at goal.

If a player attacks an opponent in a way that the referee deems to be irresponsible, reckless, or employing excessive force, the referee will award a direct free kick.jumps, kicks, or makes an attempt to kick.

To know more about soccer visit:

https://brainly.com/question/15499943

#SPJ4

These are just personal definitions of the following. They aren't official ones that may come from your textbook, but they are still accurate.

a. Friction is a force that acts against forces in contact with an object.

b. Sliding Friction is a force that acts against the forces making an object slide (e.g. the y component of the object's weight force if it's on an incline)

c. Static Friction is a force that acts on an object that is still/not moving.

d. Rolling Friction is the force making an object roll.

e. Air resistance is a frictional force that acts to slow down a falling object.

f. Terminal velocity is the maximum an object can reach while in free fall due to air resistance.

g. Gravity is a mutual attractive force in between two objects.

h. Weight is the mass of an object multiplied by the gravitational force (usually 9.81 for objects on earth). Weight is a force acting against the normal force keeping objects from phasing through each other.

i. Centripetal force is a force that acts on an object that is turning. This force pulls the object to the outside of the turning track.

j. Momentum is defined by mv (mass times velocity). Momentum is not a force, it is the idea that the motion of an object can depend on its mass and velocity.

I would check official dictionaries, just to make sure these definitions align with your textbook's.

The variation with time of the kinetic energy E_k of the ball is that it decreases. This is because gravity is acting against the ball and slowing it down, so the kinetic energy is decreasing as the ball slows down.

When the ball is released, the initial kinetic energy, E_k, is given by the equation: E_k = mgh, where m is the mass of the ball, g is the gravitational acceleration, and h is the initial height of the ball. As the ball rises, its height increases, and the potential energy, U, increases. However, this increase in potential energy is at the expense of kinetic energy, so the kinetic energy decreases as the ball rises.  

When the ball reaches its maximum height, its kinetic energy is zero as it is at rest. As the ball then begins to fall, its potential energy decreases, and its kinetic energy increases. This is because the ball is falling under the action of gravity, and thus its kinetic energy increases as it accelerates downwards.  Overall, the kinetic energy of the ball decreases as it rises and increases as it falls.

This is due to the conservation of energy, which states that the total energy of a system remains constant. As the potential energy increases, the kinetic energy decreases, and vice versa.

To know more about  kinetic energy refer to the  link   brainly.com/question/26472013

#SPJ4

The position of the particle is zero because the velocity is zero for the particle. The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point and the position of the particle is zero because the velocity is zero for the particle.

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4

According to the given statement The coefficient of static friction was found to be about 0.0850.

Static friction is a force that prevents an item from moving. The friction encountered when persons attempt to move a stationary object on a surface without actually causing any relative motion between the body and the surface on which it is located.

The graph below depicts the turntable's constant maximum speed and the centripetal acceleration of the coin.

(a) The centripetal acceleration is caused by static friction.

(b) Using the diagram below,

mai^=fi^+nj^+mg(−j^)

Fy=0nmg, thus n=mg, and Fr=mrv2=f=n=mg

Then, \sμ=rgv²=(30.0cm)(980cm/s2)(50.0cm/s)²

=0.0850

To learn more about Static friction follow the given link:

brainly.com/question/13000653

#SPJ4

The complete question is -

A coin placed 30.0cm from the center of a rotating, horizontal turntable slips when its speed is 50.0cm/s. (a) What force causes the centripetal acceleration when the coin is stationary relative to the turntable? (b) What is the coefficient of static friction between coin and turntable?

False. The Moon will typically appear in a crescent phase the day after a total lunar eclipse.

What is lunar eclipse?

A lunar eclipse is an astronomical event that occurs when the Moon passes directly behind the Earth into its umbra (shadow). During a lunar eclipse, the Earth blocks the light from the Sun from reaching the Moon.

The Moon, in turn, takes on a reddish hue as the Earth's shadow covers it. A lunar eclipse can only occur at Full Moon, when the Sun and Moon are in exact alignment with Earth in the middle. The Moon will usually appear larger than usual during a lunar eclipse, due to the reddish hue it takes on.

To learn about more lunar eclipse

https://brainly.com/question/29734849

#SPJ4

The correct option is B, the sound that reaches the ears after bouncing off a wall or a floor is called indirect sound.

Indirect sound is a type of sound that is not heard directly by the listener. Instead, it is heard through reflections of the original sound off of nearby surfaces. This sound is more muffled, as the reflections tend to lose some of the original sound's energy as it is reflected from wall to wall. Indirect sound is often used in recording studios and concert halls, as it can create a more natural or realistic sounding environment.

This is due to the fact that in real life, the sound is rarely heard directly by the listener, but rather bounces off of nearby surfaces. By using indirect sound, a more natural sound can be created for the listener. Indirect sound is also used in sound reinforcement systems, as it can help distribute sound more evenly throughout a space. This can help to create a more uniform sound.

To learn more about Indirect sound visit here:

brainly.com/question/28332693

#SPJ4

The volume of air in the room. The volume of the room is given by the product of its length, width, and height=  18.015 g/mol.

Volume of air = 5.0 m × 9.0 m × 2.4 m = 108 m^3

Next, we need to find the number of moles of water vapor present in the air at 85% of the vapor pressure of water at 30°C.

The vapor pressure for water at 30°C is 31.8 torr. At 85% of this value, the vapor pressure of water in the air is:

Vapor pressure in air = 0.85 x 31.8 torr = 27.03 torr

We can use the Ideal Gas Law, PV = nRT, to find the number of moles of water vapor present in the air.

P = 27.03 torr

V = 108 m^3

R = 8.314 J/mol·K (The universal gas constant)

T = 303 K (Temperature in kelvins)

n = (PV) / (RT)

mass of water = n * M(H2O)

Where M(H2O) is the molar mass of water which is 18.015 g/mol. It is important to note that this calculation assumes that air behaves as an ideal gas and that the temperature and pressure remain constant throughout the room. In reality, the temperature and pressure may vary throughout the room and the process of removing water vapor from the air can also affect the temperature and pressure.

to know more about vapor pressure here:

brainly.com/question/11864750

#SPJ4

The words with a blank are , magnet, coiled copper, motor, mechanical and electrical. Electric generators produce electricity by combining a moving shaft with coiled wire.

The magnetic field is the region where the strength of magnetism acts on a magnetic substance or a flowing electric charge. a magnetic field diagram that shows how the magnetic force is distributed both inside and outside of a magnetic substance.

When an object is moving, it has kinetic energy. If we intend to accelerate an object, we must exert a force. The task has been finished, energy has been applied to the object, and it is now moving at a fixed constant pace.

Therefore, electric generators generate electricity by combining coiled wire and moving shaft magnetic fields. Kinetic energy, or the energy of motion, is effectively transformed into electrical energy via electric generators.

To know more about magnetic field visit:

https://brainly.com/question/7802337

#SPJ4

Turn your head left and right and glance over your shoulder to view what cannot be seen in the side-view mirrors.

What is mirror ?

An item that reflects an image is a mirror or looking glass. When focused through the lens of the eye or a camera, light that reflects off a mirror will reveal a picture of whatever is in front of it. Mirrors reflect light at an equal but opposite angle, which changes the direction of the image.

What is direction?

Direction can refer to a thing's course, the route one must take to get there in particular, the direction something is beginning to take shape, or the direction you are facing. Going straight instead than left is an example of direction.

Therefore, Turn your head left and right and glance over your shoulder to view what cannot be seen in the side-view mirrors.

Learn more about mirrors from the given link.

https://brainly.com/question/1126858

#SPJ4

The study of computers and computing, encompassing the theoretical and algorithmic underpinnings, hardware and software, and applications for information processing, is known as computer science.

The study of algorithms and data structures, computer and network design, the modelling of data and information processes, and artificial intelligence are all included in the field of computer science. Since mathematics and engineering provide some of the underpinnings for computer science, it integrates concepts from those fields as well as queueing theory, probability and statistics, and electrical circuit design. As new algorithms, information structures, and computer architectures are conceptualised, designed, measured, and improved in computer science, extensive use of hypothesis testing and experimentation is also used.

Computer science is regarded as one of five distinct but related fields, including computer engineering, information systems,  information technology, and software engineering. This family has come to be known collectively as the discipline of computing.

To learn more about computer science visit:

brainly.com/question/20837448

#SPJ4

The proposed size of 10 miles long and 5 miles in diameter for such a colony is quite large and would require significant technological advancements in terms of materials, and construction to be feasible.

In general, a spinning cylinder produces lift when its top and bottom are subjected to higher pressure and quicker velocities, respectively. The lifting force, it was said, is pointed perpendicular to the cylinder velocity.

If r is an object's radius, v is its linear speed and is its angular velocity in radians per unit of time, then v = r. This formula connects these three values so that we can always determine the third if we know the first two.

to know more about rotating cylinders here:

brainly.com/question/13692334

#SPJ4

The mass of copper that is left unreacted at the end of the chemical reaction is 1.90 g

The mass of copper that is left untreated at the end of the chemical reaction is determined as follows:

Mass of copper before the reaction = 3.55 g

Mass of iodine before the reaction = 4.60 g

Mass of product = 6.25 g

According to the law of conservation of mass;

Mass of reactant = mass of product + mass of unreacted copper

Mass of reactants = 3.55 + 4.60

Mass of reactants = 8.15 g

The difference in the mass of the product obtained and the mass of the unreacted copper

Mass of unreacted copper = 8.15 g - 6.25 g

Mass of unreacted copper = 1.90 g

Learn more about the law of conservation of mass at: https://brainly.com/question/1992248

#SPJ1

The amount of heat transferred to or from the system is −720 J. The first law of thermodynamics states that U = Q + W

Where U is the change in the system's internal energy and W is the work performed on it. From the given, we obtain: U = 500 J W = 220 J.

Thus,  = Δ −  = −500 − 220 = −720 J

A process is referred to as adiabatic if there is no heat exchange. This process must be adiabatic because the system's internal energy drops and it is an ideal gas.

As a result, in adiabatic operations, the temperature of the gas rises as its volume decreases. This is due to the temperature shift being fueled by the gas's increased effort.

To know more about thermodynamics visit:-

https://brainly.com/question/1604031

#SPJ1

Answer:  D.

-720 joules

Explanation: plato :)

Answer:

Q = N e     total charge passing point

Q = 2.0E20 * 1.6E-19 coul = 32 coulombs

2)    I = Q / t = 32 C / 60 s = .53 amps

3)   R = V / i = 12 volts / .53 amps = 23 ohms

The percentage of the lost kinetic energy of the car, at the midpoint of the skid, is 50%.

In physics, work is the measurement of the energy used to move objects. When you are walking, you're using energy to move your body so the work done would be greater than zero.

According to work-energy theorem, work is equal to force times displacement (W = F · x).

A type of energy is kinetic energy, which is the energy of a moving object. If an object is at rest, its kinetic energy is zero. Kinetic energy is equal to one half of a mass times velocity squared (KE = 0.5 · m · v²).

When a car goes into a skid and comes to a gradual stop, at the midpoint of the skid the car has spend 50% its kinetic energy. This is simply because the velocity of the car at the midpoint of the skid is half the velocity of the car when the car starts going into a skid, assuming constant acceleration.

Learn more about kinetic energy at https://brainly.com/question/8101588.

#SPJ4

Lever arm length and force applied perpendicular to a lever arm are multiplied to create torque. A scalar quantity called torque has two possible directions: clockwise and counterclockwise.

A force applied perpendicular to a lever arm produces a torque, which is the result. The distance that runs perpendicularly from the pivot point, or the center of rotation, to the location where the force is delivered, is known as the lever arm or moment arm. A pivot point is always used to define a torque.

Each gearing stage of a torque multiplier amplifies the torque applied to the bolt. For instance, a torque multiplier with a 5:1 ratio will produce an output at the shaft that is five times the torque, but because no energy can be produced, the speed will only be one fifth of the original.

To know more about torque visit:-

https://brainly.com/question/14970645

#SPJ4

Water flows naturally under pressure from an artesian well without the need for pumping.

A well that can bring water to the surface without a pump is known as an artesian well. This happens when the aquifer's positive pressure is high enough to force the water to the surface. This positive pressure is brought on by the confinement of an artesian aquifer between impermeable rocks or clay.

Free-flowing spring water that springs from underground wells is known as artesian water. Water in artesian wells rises to the surface naturally owing to pressure, unlike conventional wells that require a pump.

When water seeps into a porous rock material, such as limestone, sand, or gravel, artesian wells are created. Simply doing this wouldn't cause water to rise. But when a thick rock layer surrounds the porous earth.

To learn more about pressure refer to:

brainly.com/question/15079200

#SPJ4

The  4.7 g/cm3 is  the density of the substance.

What is density ?

How tightly something is packed can be used to gauge a material's density. Formally, it is defined as the mass per unit of volume. Formula for Density or Density Symbol: D D = m/V, where m is mass and V is volume, stands for density.

What is mass ?

The most basic characteristic of matter, it is one of the fundamental quantities in physics. As a way to gauge how much matter is there in a body, we might use the term mass. Kilograms are the SI unit of mass (kg).

density = mass of sample/ volume of sample

mass = 1.5 kg = 1500 g

volume = W*L*H

Vol = 3.2*17.1*5.8 cm3 = 317.376 cm3

Now,

D = mass/V = 1500/317.376

D = 4.726255 g/cm3

=4.7 g/cm3

Therefore, 4.7 g/cm3 is  the density of the substance.

Learn more about density from the given link.

https://brainly.com/question/1354972

#SPJ4

2.49 Joules have been performed on the athlete, in accordance with the provided statement.

In science, the word "force" has a concrete meaning. At this point, referring to a force as a push or simply a yank is perfectly appropriate. An constituent does not "have in it" or "contain" a factor. A force is felt by one entity coming from another. The idea of a force encompasses both living and non-living entities.

You must incorporate the work expression because it is a vital part of Fdx.

Gained is

  W  =  integral of  (  150x  -  190 x 2 ) dx  

         =    75 x2   -  63.333 x3  

So now...

   work done  =   75 *0.202  -  63.333 *0.203   = 2.49Joules

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ4

The required temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

Given that,

The change in entropy of the system = 675 J/K

Heat energy = 243 J

Temperature of the system = ?

The temperature of the system is calculated below.

ΔS = ΔH/T

where,

ΔH is the heat energy

ΔS is the change in entropy of the system

T = ΔH/ΔS = 243/675 = 0.36 K

By converting temperature in kelvin to temperature in degrees centigrade, we get,

T = 273 + 0.36 = 273.36 °C

Thus, temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

To know more about temperature:

https://brainly.com/question/20940838

#SPJ4

1. The capacitor charge Q is decreasing while the current I is positive is false

2. If the measured voltage in 2 is negative when the current I is positive, it is false.

3. When the measured VOLTAGE IN1 is positive, the capacitor charge Q is positive, which is True.

4. When the RELAY is thrown to the position N.O is False, the capacitor charge Q rapidly decays to zero.

5. This experiment's transient currents flow exponentially decrease to zero, which is false

A capacitor is a type of electric device that can charge and store electrical energy when a voltage is applied to its terminals.

Formulas link the applied voltage to the capacitor's charge Q and currents I.

The final formula shows that while the current is positive, the capacitor's voltage is positive (increasing) and the

Q=CV

I=dQ/dt=C(dQ/dt)

The charge is rising.

As a result, the question's assertion is false.

As the currect is flowing from VOLTAGE IN 2 to VOLTAGE IN 1 it will be positive.

As a result, the question's assertion is false.

The measured VOLTAGE IN1 is positive when the capacitor charge Q is positive.

As a result, the question's assertion is True.

The position of the relay is the N.O. position which stands for "normally opened", i.e. no current can flow through it.

As a result, the question's assertion is false.

The following formula provides the transient current flow in this experiment:

[tex]i=i_0e^{\frac{-t}{RC}}[/tex]

As a result, the question's assertion is false.

For such more question on capacitor charge.

https://brainly.com/question/27393410

#SPJ4

Note: The diagram of the question is added bellow,

Option (a) is correct- The car has about 42% greater momentum than the SUV.

What is momentum ?

As a measure of an object's kinetic energy, momentum is easily defined. Simply put, momentum is the result of mass times velocity. full response Simply said, momentum is concerned with the quantity of motion. The conserved quantity is another definition for it.

What is mass?

Measurement of inertia, a fundamental characteristic of all matter. The resistance a body of matter offers to a change in its speed or location as a result of the application of a force is what it is in essence.

Therefore, Option (a) is correct- The car has about 42% greater momentum than the SUV.

Learn more about momentum from the given link.

https://brainly.com/question/402617

#SPJ4

The magnitude of the point charge is 12.03 × 10⁻¹² C and the electric field at 15.0m is 4.63 × 10⁻² N/C.

A point charge creates a 16,000 N/C electric field at a distance equal to 0.260 m.

E = 16,000 N/C

r = 0.260 m

k = 8.99 × 10⁹

To calculate the point charge,

E = kq/r²

16000 = 8.99 × 10⁹ × q / (0.26)²  

q = 16000 × 0.0676 / 8.99 × 10⁹

q = 10816 / 8.99 × 10⁹

q = 12.03 × 10⁻¹² C

When r= 15.0 m

E = kq/r²

E =  8.99 × 10⁹ × 12.03 × 10⁻¹² / (15)²

E = 0.4630 × 10⁻³

E = 4.63 × 10⁻² N/C

To know more about electric field here

https://brainly.com/question/14478005

#SPJ4

The electrical potential due to a dipole at a point P on its axis at a large distance x from the dipole is given by the formula: V = (p * x) / (4 * pi * epsilon_0 * x^2)

Where:

Learn more about the electrical potential here:

https://brainly.com/question/14306881

#SPJ4

Answer:

With an increase in temperature, the electrical conductivity of a pure metal decreases. This implies that the thermal conductivity of the pure metal shows little variance with an increase in temperature. However, a sharp decrease is observed when temperatures approach 0K

The situations is kinetic energy transformed into chemical energy by way of electrical energy is- wind turns the blades of a turbine on a wind generator, producing electricity that can be stored in a battery.

Hence, option A  is correct.

To know more about kinetic energy here

https://brainly.com/question/25959744

#SPJ4