Answer:
option d
it was converted into chemical energy stored in the sugar
Answer:
D. It was converted into chemical energy stored in the sugar.
Explanation:
A. It was produced by the plant. This is false because light energy is a reactant and not a product formed by the plant.
B. It was changed into oxygen gas. This is false because light energy could not be transformed to oxygen gas by any chemical means. Instead, carbon dioxide leads to oxygen being produced by the plant.
C. It was destroyed during the chemical reaction. This is false, it cannot be destroyed during the chemical reaction. Instead, it was used up and converted into chemical energy stored in the sugar.
D. It was converted into chemical energy stored in the sugar. This is true.
hope this helps!! p.s. i really need brainliest :)
A force of 25 N is used to push a box along the floor a distance of 3
m. How much work was done?
F = 25 N
s = 3 m
A = ?
A = F * s
A = 25 N * 3 m = 75 J
Answer: 75 J
A 5.0-newton force could have perpendicular components of
Answer:
It can have many set of perpendicular component but the most important one is 3 AND 4
Explanation:
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE
By what means can the internal energy of a closed system increase?.
Answer:
when work is done on the system or heat comes into the system
4. The splashing of a liquid resembles an oscillation. The restoring force in this scenario will be due to which of the following?
Potential energy
Kinetic energy
Gravity
Mechanical energy
Please show all of your work.
Gravity
when liquid splashed and is at the top, the force bringing the liquid back down to the midpoint is gravity. This brings the liquid back to its equilibrium level.
Answer:
Gravity
Explanation:
The splashing of liquid resembles like an oscillation .
The force acting on liquid to pull it down is gravity and the force bouncing it back is caused by normal reaction
Hence gravity is the answerWhat is current of 12 ohm? help me pleasee
1. 0.25 A
2. 0.5 A
3. 1 A
4. 1.5 A
5. 2 A
Answer:
the current of 12 ohm is 2A
Find the number of permutations when 7 objects are taken 1 at a time
Using the formula for permutation, there are 5040 ways that 7 objects are taken 1 at a time.
What is permutation?The permutation of objects refers to the number of ways that an object can be selected from a number of objects.
Given that;
nPr = n!/(n - r)!
Hence;
7P1 = 7!/(7 - 1)!
7P1 = 7 * 6 !/6!
7P1 = 7 * 6 * 5 * 4 * 3 * 2 *1
7P1 = 5040
Learn more about permutation: https://brainly.com/question/1216161
10. Wet-cell and Dry-cell batteries have _______ current.
A. Direct
B. Alternating
C. Series
D. Parallel
Answer:
A
Explanation:
Direct because it's still passes electricity through ir
1. How do you describe the path that the light passes through when it travels?
2. What happens during dispersion of light?
3. What are the different colors of light?
4. Similarly, how are rainbows formed up in the sky?
pls help me if u can
A:
The white light is divided into its component hues - red, orange, yellow, green, blue, and violet - as it passes through the prism. Dispersion is the splitting of visible light into its many hues.
===========================================================B:
Dispersion is the splitting of visible light into its many hues. Each hue is associated with a certain wave frequency, as stated in the Light and Color unit, and different frequencies of light waves bend at different rates while passing through a prism.
============================================================C:
The white light is divided into its component hues - red, orange, yellow, green, blue, and violet - as it passes through the prism. Dispersion is the splitting of visible light into its many hues.
===========================================================D:
The sun and the weather combine to create a rainbow. As it passes from air to denser water, light enters a water droplet, slowing and bending. The light bounces off the interior of the droplet, separating the wavelengths—or colors—that make up the droplet. A rainbow is created as light escapes the droplet.
How many ounces in a cup?
Answer:
8 oz
Explanation:
A ball that has a mechanical energy of 65 J haas 10 j of kinetic energy. The ball has j of potential energy
Answer:
55 j
Explanation:
Mechanical energy = kinetic + potential
65 = 10 + P.E.
55 j = PE
Which planets are generally referred to as the ice giants?.
Answer:
The correct answer is Uranus and Neptune
The _____ acceleration is deceleration
Answer:
hello.
Negative acceleration is also called deceleration.
Explanation:
If the velocity of the object does not change with time, it has zero acceleration.
A car drives down the road at 6m/s. The tires on the car have a diameter of .7m. How long does it take the car’s tires to complete one full rotation?
The time taken for the car's tires to complete one full rotation when it car drives down the road at 6m/s. The tires on the car have a diameter of .7m. is 0.37 s.
What is time?Time is the measure of the duration of past , present or future event.
To calculate the time taken for the tires to complete one full rotation, we use the formula below.
Formula:
v = 2πr/t............ Equation 1Where:
v = Velocity of the carr = radius of the tiret = timeπ = pie
Make t the subject of the equation
t = 2πr/v............... Equation 2From the question,
Given:
r = 0.7/2 = 0.35 mv = 6 m/sπ = 3.14Substitute these values into equation 2
t = (2×0.35×3.14)/6t = 0.37 s.Hence, The time taken for the car's tires to complete one full rotation is 0.37 s.
Learn more about time here: https://brainly.com/question/4931057
A bicycle wheel of radius 40. 0 cm and angular velocity of 10. 0 rad/s starts accelerating at 80. 0 rad/s2. What is the centripetal acceleration of the wheel at this time point?
The magnitude of the centripetal acceleration of the bicycle wheel is 40 m/s².
Centripetal acceleration of the wheel
The centripetal acceleration of the bicycle wheel is the inward or radial acceleration of the bicycle on the circular path.
The magnitude of the centripetal acceleration of the bicycle wheel is calculated as follows;
a = ω²r
where;
ω is angular speed
r is the radius of the circular path
a = (10)² x 0.4
a = 40 m/s²
Thus, the magnitude of the centripetal acceleration of the bicycle wheel is 40 m/s².
Learn more about centripetal acceleration here: https://brainly.com/question/79801
The acceleration of a body travelling in a circular route is known as centripetal acceleration. The centripetal acceleration of the wheel at this time point is 40 m/sec².
What is centripetal acceleration?The acceleration of a body travelling in a circular route is known as centripetal acceleration. It is given by the formula,
[tex]a_c = \dfrac{v^2}{r} = \omega^2 r[/tex]
The centripetal acceleration of the wheel with angular velocity 10 rad/sec and velocity 40cm (0.4 m) can be written as,
[tex]a_c = \omega ^2\times r\\\\a_c = (10)^2\times 0.4\\\\a_c = 40\rm\ m/sec^2[/tex]
Hence, the centripetal acceleration of the wheel at this time point is 40 m/sec².
Learn more about Centripetal acceleration:
https://brainly.com/question/14465119
#SPJ4
Brody drives 180 km in two hours. How fast is he travelling?
should be in km/hour)
Answer:
90 km/h
Explanation:
we just divide the distance by the time to get the speed.
A net constant force of 1500 n gives a toy rocket an acceleration of 2. 5 m/������ 2. What is the mass of the rocket?
Answer:
600Kg
Explanation:
Force= mass × acceleration
mass= 1500/2.5
600kg
The mass of the rocket will be 600 kg.In the International System of Units (SI), the kilogram is the unit of mass.
What is mass?Mass is a numerical measure of inertia, which is a basic feature of all matter. It is, in effect, a body of matter's resistance to a change in speed or position caused by the application of a force.
In the International System of Units (SI), the kilogram is the unit of mass.
The given data in the problem is;
The net constant force is, F= 1500 N
The acceleration is,a=2. 5 m/s²
The mass of the rocket is,m=?
[tex]\rm F= mass \times acceleration \\\\ m = \frac{F}{a} \\\\ m= \frac{1500}{2.5}\\\\ m = 600 \ kg[/tex]
Hence the mass of the rocket will be 600 kg.
To learn more about the mass refer to the link;
https://brainly.com/question/13073862
#SPJ4
Question 3
The FRC robot is rushing to pick up a game ball to shoot. The robot
is at rest and then it travels 30m in 1.96s. What is the robot's
acceleration in this time?
Answer:
15.61 m/s^2
Explanation:
From 3 rd equation of motion
s=ut+1/2at^2
given s = 30
u= 0 ( as body was at rest)
t= 1.96s
30=0*1.96+1/2a(1.96)^2
30=0+1/2a(1.96)^2
a=2*30÷(1.96)^2
a= 15.61 m/s^2 (approx)
A particle is moving in a circle of radius 2 meters according to the relation (please refer to picture), where Vo is measured in radians and in seconds. The speed of the particle at = 4 seconds is
(A) 13 m/s
(B) 16 m/s
(C) 26 m/s
(D) 52 m/s)
(E) 338 m/s
Answer:
ω = dΘ / dt
dΘ / dt = d (3 t^2 + 2 t) / dt = 6 t + 2
At 4 sec ω = 6 * 4 + 2 = 26 / sec
V = ω * R = 26 / sec * 2 m = 52 m/s
Scientists observed a rocky, rotating object orbiting in space. It was 250 km wide. The rocky object was located several times farther away from the sun than the earth
The rocky object orbiting in space is most likely referred to as an asteroid.
What is an Asteroid?This is referred to a rocky object which revolve around the sun and are considered too small to be called a planet.
Asteroids was observed with the use of a telescope and is around 250 km wide thereby making it the most appropriate choice.
Read more about Asteroids here https://brainly.com/question/11996385
Which planet moves the fastest and which planet moves slowest? a, b, c, d, e, or f. Explain
What increases the transfer of the wind's energy to the water?
Question 4 options:
A. flat water
B. large waves
C. large rocks
PLEAS HELP ME FAST
Answer:
A, flat water
Explanation:
Write an expression for the coefficient of kinetic friction between the block and the horizontal surface. Your answer should be in terms of x, vB, and g (the acceleration due to gravity)
An expression for the coefficient of kinetic friction between the block and the horizontal surface is given as μk = Ff/mg.
What is coefficient of kinetic friction?
The coefficient of kinetic friction is the force of frcition between a moving object and the horizontal surface.
The expression for the coefficient of kinetic friction between the block and the horizontal surface is given as;
Ff = μkFₙ
Ff = μkmg
μk = Ff/mg
where;
μk is the coefficient of kinetic frictionFf is the kinetic frictional forcem is mass of the blockg is acceleration due to gravityThus, an expression for the coefficient of kinetic friction between the block and the horizontal surface is given as μk = Ff/mg.
Learn more about coefficient of kinetic friction here: https://brainly.com/question/20241845
How many stars are in a typical spiral galaxy, like our own?.
Answer:
200 billion to 400 billion stars in a typical spiral
Explanation:
hope this helps
have an awesome day -TJ
If the barge is made out of 4.8- cm -thick steel plate on each of its four sides and its bottom, what mass of coal can the barge carry in freshwater without sinking
The maximum mass of coal that the barge will carry in freshwater without sinking is 0.111 kg.
Volume of the bargeThe volume of the barge is calculated as follows;
V = L³
V = (4.8 cm)³
V = 110.6 cm³
Density of the bargeFor the barge to float in freshwater, its density must be less or equal to density of water.
density(barge) = density(water)
density(barge) = 1 g/cm³
Maximum mass to be carried by the barge without sinkingmass = density x volume
mass = 1 g/cm³ x 110.6 cm³
mass = 110.6 g
mass = 0.111 kg
Thus, the maximum mass of coal that the barge will carry in freshwater without sinking is 0.111 kg.
Learn more about density here: https://brainly.com/question/6838128
A metal bar is in the xy-plane with one end of the bar at the origin. a force f⃗ =( 6.88 n )i^+( -2.62 n )j^ is applied to the bar at the point x= 2.88 m , y= 3.70 m .
A metal bar is in the xy-plane with one end of the bar at the origin, [tex]\[r = (3.87 \, \text{m}) \mathbf{i} + (3.21 \, \text{m}) \mathbf{j}\][/tex], [tex]\theta\approx 55.16^\circ\][/tex], magnitude of torque is 22.58 Nm.
a) Position Vector r can be calculated as:
Given:
[tex]\(x = 3.87 \, \text{m}\)[/tex]
y = 3.21 m
The position vector r for the point where the force is applied is:
[tex]\[r = (3.87 \, \text{m}) \mathbf{i} + (3.21 \, \text{m}) \mathbf{j}\][/tex]
b) Magnitude of Torque can be calculated as:
Magnitude of r:
[tex]\[|r| = \sqrt{(3.87 \, \text{m})^2 + (3.21 \, \text{m})^2} \approx 5.019 \, \text{m}\][/tex]
Magnitude of F:
[tex]\[|F| = \sqrt{(6.82 \, \text{N})^2 + (-3.24 \, \text{N})^2}\\\\ \approx 7.610 \, \text{N}\][/tex]
Calculate the dot product of r and F:
[tex]\[r \cdot F = (3.87 \, \text{m}) (6.82 \, \text{N}) + (3.21 \, \text{m}) (-3.24 \, \text{N})\\\\ \approx 16.658 \, \text{N} \cdot \text{m}\][/tex]
Calculate the angle [tex]\(\theta\)[/tex] using the dot product and magnitudes:
[tex]\[\cos(\theta) = \frac{r \cdot F}{|r| \cdot |F|} \\\\= \frac{16.658 \, \text{N} \cdot \text{m}}{(5.019 \, \text{m})(7.610 \, \text{N})}\\\\ \approx 0.5526\][/tex]
[tex]\[\theta \approx \cos^{-1}(0.5526)\\\\ \approx 55.16^\circ\][/tex]
Now calculate the magnitude of the torque using the sine of the angle:
[tex]\[|\tau| = |r| \cdot |F| \cdot \sin(\theta)\\\\ = (5.019 \, \text{m}) (7.610 \, \text{N}) \sin(55.16^\circ)\\\\ \approx 22.58 \, \text{N} \cdot \text{m}\][/tex]
c) Direction of Torque:
According to the right-hand rule, the torque points either into or out of the plane formed by r and F. Its direction is perpendicular to that plane. The sign of the angle determines the precise orientation.
In this case, since [tex]\(\theta \approx 55.16^\circ\)[/tex] is positive (counterclockwise rotation), the torque points out of the plane formed by r and F.
Thus, the direction of the torque is outward from the xy-plane.
For more details regarding torque, visit:
https://brainly.com/question/30338175
#SPJ12
Your question seems incomplete, the probable complete question is:
A metal bar is in the xy-plane with one end of the bar at the origin. A force F=(6.82)i+ -3.24j is applied to the bar at the point x=3.87m , y=3.21m .
What is the position vector r for the point where the force is applied?
a Express your answer in terms of the unit vectors i and j .
b What are the magnitude of the torque with respect to the origin produced by F?
c What are direction of the torque with respect to the origin produced by F?
A 1. 5-kω resistor and 27. 7-mh inductor are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 hz. The voltage as a function of time is given by
The voltage as a function of time for the power source oscillating at the given frequency is determined as V = 169.7sin(120πt).
Peak voltageThe peak voltage of the source is calculated as follows;
Vrms = 0.7071V₀
120 = 0.7071V₀
V₀ = 120/0.7071
V₀ = 169.7 V
Angular frequency of the waveω = 2πf
where;
f is frequency = 60 Hz
ω = 2π x 60
ω = 120π rad/s
Voltage equation as function of timeV = V₀sin(ωt)
V = 169.7sin(120πt)
Learn more about peak voltage here: https://brainly.com/question/6249123
The voltage equation is a function of a time is V = 169.7sin(120πt) if the 1. 5-kω resistor and 27. 7-mh inductors are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 Hz.
What is induced voltage?Electromagnetic induction causes the induced voltage. Electromagnetic induction is the process of creating emf (induced voltage) by exposing a conductor to a magnetic field.
We have:
[tex]\rm V{rms} = 120[/tex]
We know:
[tex]\rm V_{rms} = 0.7071V_o[/tex]
[tex]\rm 120 = 0.7071V_o[/tex]
[tex]\rm V_o = 169.70[/tex] Volts
Expression for the angular frequency is given by:
ω = 2πf
Where f is frequency
ω = 2π x 60
ω = 120π rad/s
Voltage equation as a function of time is given by:
V = V₀sin(ωt)
V = 169.7sin(120πt)
Thus, the voltage equation is a function of a time is V = 169.7sin(120πt) if the 1. 5-kω resistor and 27. 7-mh inductors are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 Hz.
Learn more about the induced voltage here:
brainly.com/question/19482771
#SPJ4
Which Tesla would win in a drag race?
(A) 2009 Tesla Roadster
(B) 2016 Tesla Model X
Answer:B
Explanation:
A has about 248 hp but B has about 683 hp. 2016 is younger too. good day
Which will have the greater acceleration rolling down an incline— a bowling ball or a volleyball?
Answer:
Bowling ball
Explanation:
The bowling ball's mass will make it roll down the incline faster than the lighter volleyball.
Have an amazing day!!
Please rate and mark brainliest!!
1. A hockey puck has a mass of 0.115-kg and strikes the pole of the net at (37 m/s)x. It bounces off in the opposite direction at (-25 m/s)x +(5 m/s)y. (A) What is the impulse on the puck? (B) If the collision takes .005s what is the force acted on the puck?
(a) The impulse on the puck is 1.323 kgm/s.
(b) The magnitude of the force that acted on the puck is 264.5 N.
Impulse of the puckThe impulse on the puck is equal to the change in momentum of the puck.
The change in th momentum of the puck is calculated as follows;
ΔP = m(u - v)
where;
v is the final velocity = (-25x + 5y) m/su is the initial velocity = 37 m/sMagnitude of the final velocity
|v| = √[(-25)² + (5)²] = 25.5 m/s
ΔP = 0.115(37 - 25.5)
ΔP = 1.323 kgm/s
Thus, the impulse on the puck is 1.323 kgm/s.
Force on the puckThe magnitude of the force that acted on the puck is calculated as follows;
F = ΔP/t
F = 1.323/0.005
F =264.5 N
Learn more about impulse here: https://brainly.com/question/25700778
Why wouldn’t you move during an earthquake?
Answer:
So you maybe don't fall, have something fall on you, and for a bunch of different reasons. EARFQUAKES are really dangrous.
Explanation:
Hope this helps you!