The pH of a solution can be related to the concentration of H+ ions and the dissociation constant of the acid (Ka) by the following equation:
pH = pKa + log([A-]/[HA])
where [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid.In this case, the acid is hypobromous acid, HBrO, and its conjugate base is the hypobromite ion, BrO-. The chemical equation for the dissociation of HBrO is:
HBrO(aq) ⇌ H+(aq) + BrO-(aq)
The equilibrium constant expression for this reaction is:
Ka = [H+(aq)][BrO-(aq)]/[HBrO(aq)]
We are given the concentration of HBrO and the pH of the solution, so we can calculate [H+(aq)]:
pH = -log[H+(aq)]
10^-pH = [H+(aq)]
10^-4.96 = [H+(aq)] = 7.94 × 10^-5 M
Since HBrO and BrO- are in a 1:1 ratio at equilibrium, [BrO-(aq)] is also 7.94 × 10^-5 M. Substituting these values in the equilibrium constant expression, we get:
Ka = [H+(aq)][BrO-(aq)]/[HBrO(aq)] = (7.94 × 10^-5)^2 / (0.060 - 7.94 × 10^-5) ≈ 2.6 × 10^-9
Therefore, the value of Ka for hypobromous acid is approximately 2.6 × 10^-9.
To know more about concentration refer here
https://brainly.com/question/10725862#
#SPJ11
true or false the membrane of rer is continuous with the outer layer of the mithochondrial membrane
Answer:
false
Explanation:
(b) in what way are carbon dioxide and orange juice similar?
Answer:
The effects of supercritical CO2 (SC-CO2) on the microbiological, sensory (taste, odour, and colour), nutritional (vitamin C content), and physical (cloud, total acidity, pH, and °Brix) qualities of orange juice were studied. The CO2 treatment was performed in a 1 litre capacity double-walled reactor equipped with a magnetic stirring system. Freshly extracted orange juice was treated with supercritical CO2, pasteurised at 90°C, or left untreated. There were no significant differences in the sensory attributes and physical qualities between the CO2 treated juice and freshly extracted juice. The CO2 treated juice retained 88% of its vitamin C, while the pasteurised juice was notably different from the fresh juice and preserved only 57% of its vitamin C content. After 8 weeks of storage at 4°C, there was no microbial growth in the CO2 treated juice.
10. Johnny pushed a wheel borrow that was 50kg, if the net force on the
wheel borrow is 15N east, what is the wheel borrows acceleration?
Where does photosynthesis occur in a plant cell? In what part of a plant cell does photosynthesis occur?
Explanation:
In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll.
Answer:
chloroplasts
In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll
Explanation:
In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll. Chloroplasts are surrounded by a double membrane and contain a third inner membrane, called the thylakoid membrane, that forms long folds within the organelle.
What happens to potential energy as kinetic energy increases during a roller coaster ride?
Answer:
On a roller coaster, energy changes from potential to kinetic energy and back again many times over the course of a ride. Kinetic energy is energy that an object has as a result of its motion. Potential energy is the energy an object has as a result of its position
Explanation:
3. Which of the following is NOT an assumption of the
kinetic-molecular theory?
a. Collisions between gas particles are elastic.
b. All the gas particles in a sample have the samel
velocity
c. A gas particle is not significantly attracted or
repelled by other gas particles.
d. All gases at a given temperature have the same aver-
age kinetic energy.
Models can be used to make predictions .
truth or false ?
Answer:
true
...................
The process of photosynthesis converts carbon atoms from carbon dioxide into....
OA. hydrogen
OB.oxygen
OC.sugars
OD.salts
Answer:
B. Oxygen
Explanation:
Answer:
C.
Explanation:
The process of photosynthesis converts those things into the sugar glucose, which it uses to sustain itself. A biproduct of this process is oxygen, but the carbon is used to make sugar. Hope this helps and brainliest is always appreciated!
explain how movements along faults generate earthquakes
Explanation:
When a plate moves it shifts the earth, and it can cause an earthquake.
A fault is where two of earth's tectonic plates come together. They can slide against the other, causing earthquakes, they can push against each other causing mountains to form, and they can move apart from each other, causing valleys or trenches.
A thermochemical equation indicates the absorption or release of heat in addition to the reactants and products involved in the chemical reaction. The amount of energy available for conversion into heat is represented by a triangle H does this term stand for?
Answer:
A. Enthalpy of the reaction
Explanation:
A Thermochemical equation is a balanced stoichiometric chemical equation that indicates the absorption or release of heat in addition to the reactants and products involved in the chemical reaction. The amount of energy available for conversion into heat is represented by ΔH, a this term which stands for the enthalpy change, ΔH.
The Enthalpy of Reaction or Heat of Reaction is the amount of energy in the form of heat transferred during a chemical reaction that occurs at a constant pressure. It is useful for calculating the amount of energy per mole either released or produced in a reaction, therefore is unit is kJ/mol.
In a reaction where energy is absorbed by the reactants during the formation of products, ΔH is positive. On the other hand, in a reaction where energy is released by the reactants during the formation of products, ΔH is negative.
The enthalpy change, ΔH of reactions are determined experimentally under standard conditions of 1 atm and 25 °C (298.15K). Enthalpy can be measured experimentally through the use of a calorimeter. A calorimeter is an isolated system which has a constant pressure and in which heat loss to the surroundings is minimal.
1. compare a mixture and a compound , how are they like?
Answer:
Compound are substances which can be formed by chemically combining two or more elements. Mixtures are substances that are formed by physically mixing two or more substances.
I hope it's helpful!
Answer:
COMPOUND= A compound is a substance that is formed when two or more elements combine chemically .
MIXTURES= Mixtures consist of two or more substances simply mixed together , but not chemically combined .
1. Which of the following seismic waves is detected first by the seismograph?
A L-waves B P-waves
CR-waves D.S-waves
Answer:
AL- waves
Explanation:
because it is famousable
11. Explain Supergiants
are cool yet luminous___
because
(Circle the
correct answer.)
a. they produce more
energy
b. they are farther from
Earth
c. they are unusually large
Helppp
me plzzz!!!!
Answer:
Explanation:
The sound waves are bocing off the walls.
Which statements reflect the process of electrolysis? Check all that apply. Water is formed from ions of hydrogen and oxygen. The electrical reactions in a rechargeable battery can be reversed. The cathode becomes the electrode for reduction. The cathode takes on the metal deposits or layers. Decomposition of ores produces separated elements. Decomposition of ores produces low energy products.
Answer:
Decomposition of ores produces separated element.
Answer: it’s b, d, and e
Explanation: i just did it, hope this helps :)
Denise was driving east over a hill in the afternoon, shortly after a rain shower. Suddenly the sun broke through the clouds, and she saw a rainbow ahead of her. Which of the following made the rainbow possible?
Answer: A. Raindrops act like a prism and separate the white light in sunlight.
Explanation:
The reason for the formation of rainbow is option A. Raindrop acts like a prism and separate the white lite into different colors.
What is rainbow?Rainbow is an arc of colors from a white light ray which can be formed by the separation of component colors from white light by the combination of reflection, and refraction.
White light absorbs all colors and reflect all of them. That is why a white object is seen white the mix of all colors. When the white light passes through a raindrop, it gets refracted, the refracted light then reflects from the drop and undergo one more refraction and that make the component colors in the form a bent or arc.
Therefore, raindrop is acting like a prism to separate the white light into its component colors. Hence, option A is correct.
Find more on rainbow:
https://brainly.com/question/15172132
#SPJ6
.
Write the symbol and charge for each individual ion:
11) Beryllium and and phosphorus
12) Cesium and sulfur
13) lithium and Phosphorus
14) Fluorine and rubidium
15) Francium and oxygen
What is the VSEPR shape of BHI2?
a.) bent
b.) trigonal planar
c.) trigonal pyramidal
d.) tetrahedral
e.) linear
Answer:
The answer is B
Explanation:
honestly do
The water cycle describes the movement of water on Earth. Water in oceans and lakes evaporates and turns into water vapor. This water vapor condenses and forms clouds which produce precipitation. Precipitation falls all over the Earth's surface. The water eventually comes back to the oceans through run-off. Which steps in the water cycle carry water out of an ocean and into a freshwater lake?
A. Evaporation and precipitation
B. Rivers and streams
C. Underground tunnels
D. Condensation and run-off
Answer:
c. Underground tunnels
Explanation:
Yes, water below your feet is moving all the time, but, no, if you have heard there are rivers flowing below ground, that is not true. Water moves underground downward and sideways, in great quantities, due to gravity and pressure. Eventually it emerges back to the land surface, into rivers, and into the oceans to keep the water cycle going.
Note: This section of the Water Science School discusses the Earth's "natural" water cycle without human interference.
The steps in the water cycle that carries water out of the ocean into a freshwater lake are rivers and streams.
What is the water cycle?The water cycle is used to describe the movement of water in the ecosystem. It involves the various processes through which water can move in the universe.
The steps in the water cycle that carries water out of the ocean into a freshwater lake are rivers and streams.
Learn more about water cycle:https://brainly.com/question/1151425
#SPJ6
Find the percent composition of chromium(|||) fluoride (CrF3), which is commonly used as a dye in textiles
Answer:
%Cr = 47.71%
%F = 52.29%
Explanation:
To do this, we need the atomic weights of all the elements in the chromiun fluoride, which are the following:
Cr: 51.996 g/mol
F: 18.998 g/mol
With these atomic weights, let's calculate the molecular mass of the chromium fluoride:
MM CrF₃ = (51.996) + (18.998 * 3) = 108.99 g/mol
Now, to get the percent composition, all we have to do is divide the atomic weight of each element by the molecular mass, and then, multiply by 100%:
% = (AW / MM) * 100
Replacing with each element:
%Cr = (51.996 / 108.99) * 100
%Cr = 47.71%%F = 100 - 47.71
%F = 52.29%Hope this helps
Which situation is does NOT occur during a chemical reaction?
bonds are formed
bonds are broken
mass is conserved
atoms are destroyed
Four different people are using sound wave technology. Which describe the form of technology most likely being used by each person?
Answer:
Its D
Explanation:
Ali is using a specialized headphone that cancels the extra noise in the atmosphere.
Megan is using a transmitter to convert electrical signals into radio waves.
Kristoff is using a microphone to convert sound waves into the electrical signals.
Jenna is using the radio to convert radio waves into sound waves.
Answer:
D. Ali is using specialized headphones, Megan is using a transmitter, Kristoff is using a microphone, and Jenna is using a radio.
Explanation:
What are periods on the periodic table? How many are there?
What are the elements in group two called
Answer: Alkaline-earth metal, any of the six chemical elements that comprise Group 2 (IIa) of the periodic table. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). Hopefully i helped
Explanation:
Answer: Alkaline-earth metal
Explanation:
how many atoms of helium are required to equalise the
mass of a silver atom ?
The atoms of helium are required to equalize the mass of a silver atom is 8.4 x 10 ⁻⁴⁸.
What are atoms?Atoms are the minute particles that are present inside elements.
Atomic mass of silver is 107.86 g/mol
Mass of one atom of silver will be
[tex]\dfrac{ 107.86 }{6.022 \times 10^{-23}} = 1.79 \times 10^2^4[/tex]
Atomic mass of helium is 6.941
[tex]\dfrac{6.022 \times 10^{-23}}{4.0 \times 1.79 \times 10^2^4 } = 8.4 \times 10^{-48}[/tex]
Thus, the atoms of helium are required to equalize the mass of a silver atom is 8.4 x 10 ⁻⁴⁸.
Learn more about atoms
https://brainly.com/question/1566330
#SPJ1
please help... will give brainiest
Answer:
The answer will be ：
In year 1869
Russian scientist named Dmitri Mendeleev
Chart called Mendeeleves periodic table
increasing atomic masses
physical and chemical properties.
Hope this Helps
Best of luck ！！
The equation for the complete combustion of ethane (C2H4) is
C2H4(g) + 302(g) → 2C02(g) + 2H2O(g)
If 2.70 moles C2H4 reacts with 6.30 moles Oz, identify the limiting
reactant.
300,000,000 m/s is the speed of ?
Answer:
671080887.616
Explanation:
Which of the following is true about the electron configuration of the noble gas
A. The highest occupied s and p orbitals are partially filled.
B. the highest occupied s and p orbitals are completely filled.
C. the electrons with the highest energy are in a f sub level
D. the electrons with the highest energy are in a d sublevel
Answer:
Noble gases have very stable electron configuration and does not need to gain electrons, only when they gain energy. 1) For example, krypton is a chemical element with symbol Kr and atomic number 36, which means it has 36 protons and 36 electrons.
Answer: I think it’s B, The highest occupied s and p sub levels are completely filled.
Explanation:
5. A boat travels 325,000 meters in 800 seconds. What was its speed?
Answer:
406m/s
Explanation:
Speed = distance ÷ time
Answer:
406 m/s
Explanation:
Divide 325,000 meters by 800 and 800 seconds by 800 (because we are trying to find the speed in meters per second.
325,000÷800 = 406.25 meters
800÷800 = 1 second
≈ 406 m/s