The sorting algorithms with the worst best-time complexity are A. Merge Sort B. Insertion Sort c. Heap Sort D. Radix Sort E. Bubble Sort F. Selection Sort G Quick Sort H. Bucket Sort

This is a true statement. The Turing Test is a measure of a machine's ability to exhibit intelligent behavior that is indistinguishable from that of a human.

While commercial artificial intelligence systems have come a long way in recent years, they still have a long way to go before they can pass the Turing Test and demonstrate true intelligence. While many AI systems are capable of performing complex tasks such as natural language processing and image recognition, they lack the ability to truly understand context and nuance. In addition, AI systems are limited by their programming and the data they are trained on, which can lead to errors and biases. Therefore, it is true that all commercial artificial intelligence systems are still a long way from showing any significant intelligence as measured by the Turing Test.

To know more about Turing Test visit:

https://brainly.com/question/28240243

#SPJ11

It is true that web services are typically based on standardized protocols and technologies, making them more interoperable and easier to integrate compared to proprietary components.

This interoperability reduces the cost and effort required to weave together different web services as compared to integrating proprietary components, which may have unique interfaces and dependencies. Additionally, the widespread adoption of web services has led to the availability of various open-source and low-cost tools and frameworks that facilitate their integration, further reducing the overall cost.

Web services are typically based on standardized protocols and technologies such as XML (eXtensible Markup Language), SOAP (Simple Object Access Protocol), and REST (Representational State Transfer). These standards ensure a common and consistent approach to communication between different systems and platforms.

Standardized protocols allow web services to communicate effectively and seamlessly across various networks, operating systems, and programming languages. This interoperability is crucial for integrating different systems and components, as it eliminates the need for custom integration solutions and minimizes compatibility issues.

To know more about web services,

https://brainly.com/question/14504739

#SPJ11

No, you cannot directly input the value of an enumeration type from a standard input device.

Enumeration types are a set of named constants that are predefined at compile time and cannot be modified during program execution. To set the value of an enumeration variable, you must assign it one of the constants defined in the enumeration type. Accepting input from a standard input device and using conditional statements to check the input against the values of the enumeration constants, assigning the appropriate constant to the enumeration variable is possible. However, this requires additional programming steps and cannot be done directly from the standard input device. Therefore, you cannot input the value of an enumeration type directly from a standard input device.

Learn more about enumeration types here;

https://brainly.com/question/25480230

#SPJ11

To complete the StackSort method, we can use a while loop that pops the values from the upperValues stack and stores them in the result array. The loop will continue as long as there are still values in the stack.

We can use the pop() method of the stack to remove the top value and assign it to a variable. Then, we can assign that variable to the current index of the result array and decrement the index. This will ensure that the values are placed in the result array in reverse order.

Here's what the code would look like:

```
public static int[] StackSort(Stack lowerValues, Stack upperValues, int size) {
   int[] result = new int[size];
   int index = size - 1;
   
   while (!upperValues.isEmpty()) {
       int value = upperValues.pop();
       result[index] = value;
       index--;
   }
   
   return result;
}
```

After compiling and running the program with a given size, we should see the results for each call to the StackSort method in reverse order.

The values in the result array should be the same as the values that were added to the stack, but in reverse order. If everything went well, we should see the expected output and know that our StackSort method is working correctly.

Know more about the StackSort method,

https://brainly.com/question/30136548

#SPJ11

After the first operation, Pop(numStack), the top element of the stack (67) is removed. The stack now becomes 44, 61.

Then, the operation Push(numStack, 63) adds 63 to the top of the stack. The stack becomes 44, 61, 63. Next, the operation Pop(numStack) removes the top element of the stack (63). The stack becomes 44, 61. Finally, the operation Push(numStack, 72) adds 72 to the top of the stack. The stack becomes 44, 61, 72. Therefore, the final state of the stack is: 44, 61, 72.

The function GetLength(numStack) returns the number of elements in the stack, which is 3.
Initial numStack: 67, 44, 61 (top is 67) 1. Pop(numStack): Remove the top element (67).  New numStack: 44, 61 2. Push(numStack, 63): Add the element 63 to the top. New numStack: 63, 44, 61 3. Pop(numStack): Remove the top element (63). New numStack: 44, 61 4. Push(numStack, 72): Add the element 72 to the top. New numStack: 72, 44, 61

After the above operations, the stack is 72, 44, 61 (top is 72). To find GetLength(numStack), count the elements in the stack. There are 3 elements (72, 44, and 61).  After the operations, the numStack is 72, 44, 61, and GetLength(numStack) returns 3.

To know more about stack visit:-

https://brainly.com/question/28881516

#SPJ11

Find initial flow; while there exists an augmenting path, find the minimum capacity along the path and add it to the flow, update residual network, repeat until no augmenting path.

To find the maximum flow in a network G=(V,E) by a sequence of at most |E| augmenting paths, we can use the Ford-Fulkerson algorithm.

Once we have found the maximum flow, we can determine the augmenting paths by performing a depth-first search on the residual graph, starting at the source and following edges with positive residual capacity.

Each path we find corresponds to an augmenting path in the original graph.

Learn more about augmenting path

brainly.com/question/29898200

#SPJ11

The solution to the given problem is to iterate through the names list and check if any element in the list contains the query. If the element contains the query, we add it to the result list.

Here is the code for the solution:

```
names = ['jackson', 'jacques', 'jack']
query = ['jack']

result = []

for name in names:
   if any(q in name for q in query):
       result.append(name)

print(result)
```


The code initializes an empty result list and iterates through the names list using a for loop. In each iteration, it checks if any of the query terms are present in the name using the any function and a generator expression. If the condition is True, it adds the name to the result list.

The any function returns True if any element in the iterable is True. Here, we are checking if any query term is present in the name. The generator expression `(q in name for q in query)` creates a sequence of True and False values for each query term in the name. If any of these values is True, the any function returns True.

To know more about element, visit;

https://brainly.com/question/28565733

#SPJ11

When specifying the tolerance for a dimension defining the spacing of bushings in a drill jig, the designer is allowed to use a range of values that defines the acceptable variation in the dimension.

The tolerance specifies the allowable deviation from the nominal dimension and helps ensure that the bushings are positioned correctly and accurately. The designer must take into account the intended use of the drill jig and the requirements of the specific application to determine the appropriate tolerance. Factors such as the material being drilled, the precision of the drilling process, and the required accuracy of the finished product may all influence the tolerance specification. Ultimately, the goal is to ensure that the drill jig produces accurate and consistent results, while minimizing the risk of errors or defects.
When specifying the tolerance for a dimension defining the spacing of bushings in a drill jig, the designer is allowed to use bilateral tolerances. Bilateral tolerances provide an upper and lower limit for a dimension, ensuring that the spacing of the bushings falls within an acceptable range. This is important because it ensures proper alignment and functionality of the drill jig while also accounting for potential variations in manufacturing. By adhering to the specified tolerance, the drill jig can maintain its accuracy and efficiency in drilling operations.

For more information on tolerance visit:

brainly.com/question/30478622

#SPJ11

The dual of a compound proposition is obtained by interchanging the logical connectives "and" and "or", and negating all the propositional variables. In other words, we replace "and" with "or", "or" with "and", and negate all the propositional variables. The resulting compound proposition is called the dual of the original proposition. a) p ∨ ¬q

The dual of p ∨ ¬q is ¬p ∧ q.

We interchange "or" with "and", and negate both p and q. The dual proposition is therefore the conjunction of the negations of p and q.
b) p ∧ (q ∨ (r ∧ T))
The dual of p ∧ (q ∨ (r ∧ T)) is ¬p ∨ (¬q ∧ (¬r ∨ ¬T)).
We interchange "and" with "or", and negate all the propositional variables. We also apply De Morgan's laws to the nested conjunction of r and T, which becomes a disjunction of their negations. The resulting dual proposition is the disjunction of the negation of p and the conjunction of the negations of q, r, and T.
c) (p ∧ ¬q) ∨ (q ∧ F)
The dual of (p ∧ ¬q) ∨ (q ∧ F) is (¬p ∨ q) ∧ (¬q ∨ T).
We interchange "or" with "and", and negate all the propositional variables. The disjunction (p ∧ ¬q) ∨ (q ∧ F) is equivalent to the conjunction of its negations, which are (¬p ∨ q) ∧ (¬q ∨ T). The first conjunction corresponds to the negation of the left disjunct, and the second conjunction corresponds to the negation of the right disjunct.

To  know more about proposition visit:

brainly.com/question/30545470

#SPJ11

Hadamard codes are binary codes that are constructed based on the Hadamard matrix. These codes are useful in error correction and detection, as well as in applications such as cryptography and data compression.

here are two Hadamard codes of length 8:
1) 11110000
   11001100
   10101010
   10010110
   01100110
   01011010
   00111100
   00000011

2) 11111100
   11000011
   10101010
   10010101
   01111000
   01000111
   00111100
   00000011

Note that these codes have the property that any two codewords differ in at least four positions. This means that they can detect and correct up to two errors. Additionally, Hadamard codes have the property that the dot product between any two distinct codewords is zero, which makes them useful in orthogonal signal processing.
Code 1: 00001111
Code 2: 00110011
These codes are generated by the Hadamard matrix of order 8, which is an orthogonal matrix with elements consisting of only 1s and -1s. In this case, I've represented the -1s as 1s to provide binary codes.

To know more about Hadamard codes visit-

https://brainly.com/question/15173063

#SPJ11

Here's a VBA code to create a relative macro that turns the fill color of a range of cells red:

```vba
Sub TurnRangeRed()
   Dim RangeToFill As Range
   Set RangeToFill = Application.Selection
   RangeToFill.Interior.Color = RGB(255, 0, 0)
End Sub
```


1. We create a new VBA Sub procedure called "TurnRangeRed".
2. We declare a variable called "RangeToFill" as a Range object.
3. We set the "RangeToFill" variable to the currently selected range using `Application.Selection`.
4. We change the interior color of the "RangeToFill" variable to red using `RangeToFill.Interior.Color = RGB(255, 0, 0)` where RGB(255, 0, 0) represents the color red.


To use this macro, simply select the range of cells you want to turn red in your Excel sheet, and then run the "TurnRangeRed" macro. The fill color of the selected cells will be changed to red.

To know more about cells red, visit;

https://brainly.com/question/28452954

#SPJ11

The number of strings of length 9 over the alphabet {a, b, c} subject to the given restrictions are as follows: (a) 2,430 strings, (b) 304 strings, (c) 658 strings, and (d) 1,731 strings.

(a) To count the number of strings where the first or last character is 'a,' we can consider two cases: when the first character is 'a' and when the last character is 'a.' In each case, we have 3 choices for the remaining 8 characters (b, c), resulting in a total of 2 * 3^8 = 2,430 strings.

(b) For strings containing at least 8 consecutive 'a's, we consider the position of the first 'a' and the remaining 8 characters. The first 'a' can occur in positions 1 to 2, and the remaining characters can be any combination of 'a', 'b', and 'c'. Thus, the total count is 2 * 3^8 = 304 strings.

(c) To find the number of strings with at least 8 consecutive identical characters, we consider the position of the first set of consecutive characters (which can be 'a', 'b', or 'c') and the remaining 8 characters. The first set can occur in positions 1 to 2, and the remaining characters can be any combination of 'a', 'b', and 'c'. Therefore, the total count is 3 * 3^8 = 658 strings.

(d) Finally, to count the strings where the first character is the same as the last character, or the last character is 'a', or the first character is 'a,' we combine the cases from (a) and (d). The total count is 2 * 3^8 + 3 * 3^7 = 1,731 strings.

In conclusion, the number of strings satisfying each of the given restrictions are: (a) 2,430 strings, (b) 304 strings, (c) 658 strings, and (d) 1,731 strings.

learn more about number of strings here:

https://brainly.com/question/31386052

#SPJ11

For the query "Find the number of all departments that are on the 1st floor and have a budget of less than $50,000," the best index choice to speed up the query would be a Clustered B+ tree index on the floor field of Dept (option c).

A clustered index stores the actual data rows in the table, sorted by the index key. B+ tree indexes are ideal for range queries, as they maintain a balanced structure and allow for efficient traversal. In this case, the query focuses on both the floor and the budget criteria.

By choosing a clustered B+ tree index on the floor field, the departments on the 1st floor are already sorted and can be quickly accessed. As the data rows are stored in this sorted order, scanning the records with a budget of less than $50,000 will also be efficient, resulting in an optimized query performance.

Other index options may improve the search on a single field, but the combination of the two criteria makes the clustered B+ tree index on the floor field the most suitable choice.

To know more about index key visit:

https://brainly.com/question/30174909

#SPJ11

The door lock control mechanism is designed to prioritize safety by allowing entry only under specific conditions. One of these conditions is that radiation shields must be in place to prevent the release of radioactive materials outside the storage room.

Radiation shields are barriers made of heavy materials like concrete and lead that absorb and block the radiation emitted by the waste.

Another condition is that the radiation level in the room must be below a predetermined danger level.

This means that before allowing access, the radiation levels must be checked to ensure that they are not hazardous.

If the radiation levels are within the safe limit, the door lock control mechanism will permit access to the storage room.

Authorized operators can open the door remotely when the radiation shields are in place and the radiation level is safe.

This is done to prevent direct contact with the radioactive waste and minimize exposure to radiation.

By controlling access to the storage room, the facility can prevent unauthorized persons from entering the area and potentially exposing themselves to harmful radiation.

Overall, the strict control mechanism ensures that the nuclear waste storage facility remains safe for workers and the environment.

It minimizes the risks associated with handling radioactive materials and prevents any incidents that could harm human health or the environment.

Read more about Radiation.

https://brainly.com/question/31037411

#SPJ11

The query above is selecting the country code and the count of records from the "countrylanguage" table, after joining with the "country" table on the country code. It is then grouping the results by the country code, and filtering the results to only show records where the count is greater than one. Finally, it is limiting the output to ten rows.
This query cannot be rewritten without the GROUP BY and HAVING clauses, as they are necessary to aggregate the results by country code and filter the results based on the count of records.
The GROUP BY clause is used to group the records by a specified column or columns, which allows for the use of aggregate functions like COUNT(). The HAVING clause is then used to filter the results based on the aggregated values. Without these clauses, the query would return all records in the table without any aggregation or filtering.

To know more about country code visit:

https://brainly.com/question/28350413

#SPJ11

The output when we execute fun1(head) would be 3. This is because the function is using two pointers, one (slow_ptr) moving one node at a time, and the other (fast_ptr) moving two nodes at a time.

The while loop continues until the fast_ptr reaches the end of the linked list. At that point, the slow_ptr will be pointing to the middle node of the list, which in this case is the node containing the value 3. The function then prints out the data value of that middle node, which is 3. Therefore, the output of the function would be 3.
In this segment of codes, the function fun1 takes a LinearNode object as a parameter, which is essentially the header of a linked list. The function then uses two pointers, slow_ptr and fast_ptr, to traverse the linked list. The while loop in the function ensures that the fast_ptr moves two nodes at a time, while the slow_ptr moves one node at a time. This is a common algorithm used to find the middle node of a linked list. Once the loop is exited, the slow_ptr points to the middle node of the list. Finally, the function prints out the value of the data in that middle node. This function can be useful in various applications where we need to access the middle node of a linked list, such as in sorting or searching algorithms.

To know more about output visit :

https://brainly.com/question/14227929

#SPJ11

This code snippet is designed to count the number of occurrences of each letter in a given string. Here is a breakdown of how it works:

To display the character that appears most frequently in the string, you can add the following code after the iteration:

max_count = max(AlphaCount)

max_index = AlphaCount.index(max_count)

most_frequent_char = Alpha[max_index]

print(f"The most frequent character is {most_frequent_char} with a count of {max_count}.")

This code finds the maximum count in the AlphaCount list using the max() function, then finds the index of that maximum count using the index() method. The most frequent character is then retrieved from the Alpha string using the index, and the result is printed to the console.

To know more about AlphaCount list, visit:

brainly.com/question/31429657

#SPJ11

The Big-O behavior of the get(int index) method in Java's LinkedList class for a list of size N, when the value of index is N/2, is O(N).

This is because LinkedList is a sequential data structure and in order to get the element at index N/2, the method needs to traverse through half of the list, which takes O(N/2) time in the worst case. Therefore, the time complexity of the get() method for this scenario is proportional to the size of the list, which is O(N).

It is important to note that for a LinkedList, the get() method has a time complexity of O(1) only when accessing the first or last element of the list. When accessing any other element, the time complexity is O(N).

Learn more about Big-O behavior here:

https://brainly.com/question/30907264

#SPJ11

The full question is given below:

What is the Big-O behavior of the get(int index) method in Java's LinkedList class for a list of size N, when the value of index is N/2?

O(1)

O (log N)

O (N)

O(N log N)

A 32 KiB cache with two-word blocks would require a total of 1,048,576 bits of memory to implement.

To calculate the total number of bits required for a 32 KiB cache with two-word blocks, we need to first understand that a cache is essentially a small amount of fast memory used to temporarily store frequently accessed data. The cache is divided into blocks, and each block contains a certain number of words. In this case, we are dealing with two-word blocks.

Since each block contains two words, we can calculate the total number of blocks in the cache by dividing the cache size (32 KiB) by the block size (2 words). This gives us:

32 KiB / 2 words = 16,384 blocks

Next, we need to determine the number of bits required to represent each block. Since each block contains two words, and each word is typically 32 bits (4 bytes), the total number of bits in each block is:

2 words * 32 bits/word = 64 bits

Finally, to calculate the total number of bits required for the entire cache, we need to multiply the number of blocks by the number of bits in each block:

16,384 blocks * 64 bits/block = 1,048,576 bits

Learn more about cache: https://brainly.com/question/6284947

#SPJ11

The AMAT for this computer system is 7.95 ps.

To calculate the AMAT (Average Memory Access Time) for this computer system, we need to take into account both the hit time (time to read from cache) and the miss penalty (time to retrieve data from main memory when there is a cache miss).
We know that out of 2000 CPU requests, 1900 are satisfied from cache. This means that the hit rate is 0.95 (1900/2000). Therefore, the miss rate is 0.05 (1 - 0.95).
To calculate the AMAT, we use the following formula:
AMAT = hit time + (miss rate x miss penalty)
Substituting the given values:
AMAT = 3 ps + (0.05 x 99 ps)
AMAT = 3 ps + 4.95 ps
AMAT = 7.95 ps

To know more about computer visit :-

https://brainly.com/question/20414679

#SPJ11

To fit an MLR model with a linear and quadratic term for var2 using PROC GLM, you would specify the model statement as follows: MODEL var1 = var2 var2*var2;This includes var2 as a linear term and var2*var2 as a quadratic term.

The asterisk indicates multiplication, and the two terms together allow for a non-linear relationship between var2 and var1. Your final code would look like:
PROC GLM DATA = ...;
MODEL var1 = var2 var2*var2;
RUN;
QUIT;
This will run the MLR model with both linear and quadratic terms for var2. Note that you will need to substitute the appropriate dataset name for "DATA = ...".
Hi! To fit a multiple linear regression (MLR) model with a linear and quadratic term for var2 using PROC GLM in SAS, you'll need to include both the linear term (var2) and the quadratic term (var2*var2) in the model statement. Here's the code template and explanation:

```
PROC GLM DATA = your_dataset;
 MODEL var1 = var2 var2*var2;
RUN;
QUIT;
```

To know more about MLR model visit:-

https://brainly.com/question/31676949

#SPJ11

In C++, a struct and a class are nearly identical, except that a struct defaults to public member access, while a class defaults to private member access. To convert a struct to a class, you simply change the keyword struct to class. Here's an example:

class Person {

public:

   // Constructor

   Person(std::string n, int a) : name(n), age(a) {}

   // Destructor

   ~Person() {}

   // Public member variables

   std::string name;

   int age;

};

In this example, we've converted a struct called Person into a class called Person. We've added a constructor that takes a std::string and an int as arguments and initializes the name and age member variables. We've also added an empty destructor. Since all member variables are now private by default, we've added the public: access specifier to the top of the class to indicate that the name and age member variables are public.
If you have multiple classes, you would create constructors and destructors for each class in the same way, by defining them within the class definition.

To learn more about keyword
https://brainly.com/question/10055344
#SPJ11

Polling and interrupts are two common methods used to respond to external events in computer systems. Polling involves repeatedly checking a device or resource for new information, while interrupts allow a device to signal the system when it requires attention.

Polling can be advantageous in situations where the external event occurs infrequently and in a predictable manner.

Know more about the Polling

https://brainly.com/question/14818875

#SPJ11

To be an effective auditor in performing auditing, an individual should possess a certain level of computer- and information systems-related knowledge and skills.

With the rise of technology and digitization, most business transactions and data are processed and stored electronically, making it essential for auditors to understand how to navigate these systems and assess their controls adequately.

An auditor must have knowledge of computer and information systems, including the operating systems, software, hardware, and data storage technologies. They must be familiar with the various security measures used to protect data and ensure the integrity of systems. Additionally, auditors must be able to conduct risk assessments related to IT systems, analyze audit trails and logs, and use data analytics tools to perform audit tests.

In summary, an auditor must possess a sound understanding of computer and information systems to perform auditing effectively in today's technology-driven business environment.

To know more about risk assessments visit:

https://brainly.com/question/14804333

#SPJ11

The correct answer is B/25. 64 in. The formula for the area of a rectangle is A = base × height. Given the area A = 368.4 in² and the height h = 15 in, we can rearrange the formula to solve for the base b. Dividing the area by the height, we get b = A / h = 368.4 in² / 15 in = 24.56 in. Rounded to the nearest whole number, the base is 25 in.

The area of a rectangle is determined by multiplying its base by its height. To find the base, we rearrange the formula: A = base × height. We substitute the given values, A = 368.4 in² and h = 15 in. Solving for the base, we divide the area by the height: b = A / h = 368.4 in² / 15 in = 24.56 in. Finally, rounding to the nearest whole number, we conclude that the base of the rectangle is 25 in. Therefore, the correct answer is B/25. 64 in.

Learn more about rectangle is determined here:

https://brainly.com/question/14812693

#SPJ11

True. In the MIPS calling convention, local variables in functions are accessed at negative offset relative to the frame pointer. This means that the variables are stored in memory locations below the frame pointer in the function's stack frame. The offset is determined by the size of the variable and its position in the function's stack frame. This convention helps to ensure that local variables are isolated and protected from other parts of the program. It also allows for efficient memory management and optimization of the program's execution.

To know more about "Variables" please visit;

https://brainly.in/question/40782849?referrer=searchResults

#SPJ11

True. In the MIPS calling convention, local variables in functions are indeed accessed at negative offsets relative to the frame pointer. This allows for efficient memory allocation and organization, ensuring that the function can access its local variables quickly and accurately.

In the MIPS calling convention, local variables in functions are accessed at negative offset relative to the frame pointer.

Know more about the MIPS calling convention

https://brainly.com/question/31559088

#SPJ11

The sentence provided seems to be incomplete, as it cuts off after "improve the securit." Please provide the complete sentence so that I can accurately determine if it is true or false.

learn more about network administrator

https://brainly.com/question/5860806?referrer=searchResults

#SPJ11

Option d Ox1A3B is the correct option of bitwise OR operator.

To solve this problem, we need to perform a bitwise OR operation on the two given hexadecimal numbers, which are Ox1A2B and OxOA3B. We can convert these numbers to binary first and then perform the operation.

Ox1A2B in binary is 0001 1010 0010 1011
OxOA3B in binary is 0000 1010 0011 1011

Now we perform the bitwise OR operation:
0001 1010 0010 1011
| 0000 1010 0011 1011
---------------------
0001 1010 0011 1011

Finally, we convert the result back to hexadecimal, which is Ox1A3B. Therefore, the option d) Ox1A3B is the correct one.

To know more about bitwise OR operation visit:

https://brainly.com/question/30900811

#SPJ11

To effectively use the ADT Bag, it's essential to know its interface, how entries are represented, the capacity, and how operations are implemented.

To effectively use the ADT Bag in a program, it is essential to know:
a. The interface of the bag: This refers to the set of operations and their specifications, which allows you to interact with the bag without needing to understand the underlying implementation.
b. How entries in the bag are represented: Understanding the data type of the entries and their organization within the bag helps you work with the bag's contents.
c. How many entries can be stored in the bag: This provides you with an understanding of the bag's capacity, which helps you plan and manage memory usage.
d. How bag operations are implemented: While it's not mandatory to know the exact implementation details, having a general idea of how the bag operates will help you use it more efficiently and effectively in your program.

Learn more about ADT Bag here;

https://brainly.com/question/30896937

#SPJ11

Here is the stored procedure "insert_friend" that takes two input parameters (ID1 and ID2) of type INT as the ID of highschooler and inserts two tuples in the Friend table if they do not already exist:
DELIMITER $$
CREATE PROCEDURE insert_friend(IN ID1 INT, IN ID2 INT)
BEGIN
   IF NOT EXISTS (SELECT * FROM Friend WHERE ID1 = ID1 AND ID2 = ID2) AND NOT EXISTS (SELECT * FROM Friend WHERE ID1 = ID2 AND ID2 = ID1) THEN
       INSERT INTO Friend (ID1, ID2) VALUES (ID1, ID2), (ID2, ID1);
   END IF;
END$$
DELIMITER ;
To use this stored procedure, you can simply call it with the two ID parameters you want to add as friends, like this:
CALL insert_friend(1934, 1661);
This will insert the tuple (1934, 1661) and its reciprocal (1661, 1934) into the Friend table if they do not already exist.

To know more about parameter visit:

https://brainly.com/question/30757464

#SPJ11