A 10N book resting on a table has a 10N support force acting on it. Gravitational force below and normal force upward are the forces at work on the book.
The gravitational force is directly opposed by the direction of this normal force. If there is no net force acting on the book, it remains in equilibrium. Since the book is at rest in the scenario above, the force exerted on it will also be 10 N. Here, the term "supporting force" refers to the normal reaction of the table to the block; in this case, it is equal to its weight. The book is being pulled down by gravity and being pushed back up by the table. These two forces (action-reaction) are equal and in opposition to one another.
To learn more about normal force click here https://brainly.com/question/13340671
#SPJ4
8. The pulley is assumed massless and frictionless and rotates freely about its axle. The blocks have masses m = 40 g and m₂ = 20 g, and block mi is pulled to the right by a horizontal force of magnitude F = 0.03 N. Find the magnitude of the acceleration of block m2 and the tension in the cord if the surface is frictionless. (2pt) m₂ a₂ T₂ T₂ T₁ m₁
The magnitude of the acceleration of block m2 is 0.09 m/s² and the tension in the cord is 1.8 x 10⁻³ N.
Acceleration of the blocksThe acceleration of the blocks is calculated from the net force on the blocks.
∑F = ma
a = ∑F/m
a = (F) / (m₁ + m₂)
where;
F is the horizontal force appliedm₁ is mass of first block = 40 g = 0.04 kgm₂ is mass of the second block = 20 g = 0.02 kga = (0.03)/(0.04 + 0.02)
a = 0.09 m/s²
Tension due to block m₂T = m₂a
T = (0.02 x 0.09) = 1.8 x 10⁻³ N
Thus, the magnitude of the acceleration of block m2 is 0.09 m/s² and the tension in the cord is 1.8 x 10⁻³ N.
Learn more about tension here: https://brainly.com/question/24994188
#SPJ1
deriving projectile motion formulas
Answer:
Projectile motion formula or equations derived (In Tabular format)Motion Path equation:
y = (tanθ) x – (1/2) g . x2/(V0 cosθ)2
Explanation:
Three strings, attached to the sides of a rectangular frame, are tied together by a knot as shown in the figure. The magnitude of the tension in the string labeled C is 56.3 N.
Calculate the magnitude of the tension in the string marked A.
The magnitude of the tension in the string marked A and B is mathematically given as
A = 52.5 N
What is the magnitude of the tension in the string marked A?Generally, the equation for is mathematically given as
tan=3/8
negative x
[tex]B= tan\phi \\tan \phi=5/4[/tex]
negative x
C= tan=1/6
Hence, considering the Horizontal components
74.9cos(9.46) = A*cos(20.6) + B*cos(51.3)
A = 78.9 - 0.668B
Vertical components
74.9*sin(9.46) + Asin(20.6) = Bsin(51.3)
40.07 = 1.015B
B = 39.5 N
In conclusion, Sub the value of B is the equation of A
A = 78.9 - 0.668B
Sub
A = 78.9 - 0.668( 39.5 N)
A = 52.5 N
Read more about tension
brainly.com/question/15880959
#SPJ1
For a projectile launched horizontally at 650 m/s and travels for 5.75 seconds, What is the range?
The range of horizontal projectile motion is 3737.5 m.
A projectile's horizontal velocity is constant (a never changing value), Gravity causes a downward vertical acceleration with a magnitude of 9.8 m/s/s. A projectile's vertical velocity fluctuates by 9.8 m/s per second, A projectile's vertical motion is unrelated to its horizontal motion. we know that sinθ is maximum at 90°. Therefore horizontal range will maximum at 45°.
To calculate the range of horizontal projectile motion we use;
Δx = vₓ t
where , Δx = Range
vₓ = Velocity
t = Time
Initial horizontal velocity, vₓ = 650 m/s
Time = 5.75 sec
Δx = 650 × 5.75
= 3737.5 m
Therefore, the range of horizontal projectile motion is 3737.5 m.
Learn more about projectile motion here:
https://brainly.com/question/24949996
#SPJ1
By how much does the gravitational potential energy of a 55- kg pole vaulter change if her center of mass rises about 4.0 m during the jump?
Express your answer to two significant figures and include the appropriate units.
The change in the gravitational potential energy of the pole vaulter is 2,156 J.
Change in the gravitational potential energy
The change in the gravitational potential energy of the pole vaulter is calculated as follows;
ΔP.E = mg(Δh)
where;
m is massΔh is change in heightΔP.E = (55)(9.8)(4)
ΔP.E = 2,156 J
Thus, the change in the gravitational potential energy of the pole vaulter is 2,156 J.
Learn more about gravitational potential energy here: https://brainly.com/question/1242059
#SPJ1
Three strings, attached to the sides of a rectangular frame, are tied together by a knot as shown in the figure. The magnitude of the tension in the string labeled C is 56.3 N.
Calculate the magnitude of the tension in the string marked A. (You'll need to get the various positions from the graph. The ends of the strings are exactly on one of the tic marks.)
The magnitude of the tension in the string marked A is 52.5N
Generally, the equation for is mathematically given as
Let's take θ be an angle at A
So, tanθ = 3/8
Let's take α be an angle at B (Below X)
tanα = 5/4
Let's take β be an angle at C (Below x)
tanβ = 1/6
First we take the Horizontal Components
74.9cos(9.46°) = Acos(20.6°) + Bcos(51.3°)
By solving the equation, we get
A = 78.9 - 0.668B … (1)
Now, we take the vertical components
74.9sin(9.46°) + Asin(20.6°) = Bsin(51.3°)
By solving the equation, we get
40.07 = 1.015B
B = 39.5N
By substituting the value of B in equation (1)
A = 78.9 - 0.6668× 39.5
A = 52.5N
Hence, the magnitude of the tension in the string marked A is 52.5N
Learn more about Tension here https://brainly.com/question/2287912
#SPJ1
A man pushing a crate of mass
m = 92.0 kg
at a speed of
v = 0.880 m/s
encounters a rough horizontal surface of length
ℓ = 0.65 m
as in the figure below. If the coefficient of kinetic friction between the crate and rough surface is 0.359 and he exerts a constant horizontal force of 299 N on the crate.
(a) Find the magnitude and direction of the net force on the crate while it is on the rough surface.
magnitude _______N
Direction?:
1. Same as the motion of the crate
2. opposite as the motion of the crate
(b) Find the net work done on the crate while it is on the rough surface.
___________J
(c) Find the speed of the crate when it reaches the end of the rough surface.
_________m/s
(a) The magnitude and direction of the net force on the crate while it is on the rough surface is 24.67 N, opposite as the motion of the crate.
(b) The net work done on the crate while it is on the rough surface is -16.04 J.
(c) The speed of the crate when it reaches the end of the rough surface is 0.65 m/s.
Magnitude of net force on the crateF(net) = F - μFf
F(net) = 299 - 0.351(92 x 9.8)
F(net) = -24.67 N
Net work done on the crateW = F(net) x L
W = -24.67 x 0.65
W = - 16.04 J
Acceleration of the cratea = F(net)/m
a = -24.67/92
a = - 0.268 m/s²
Speed of the cratev² = u² + 2as
v² = 0.88² + 2(-0.268)(0.65)
v² = 0.426
v = √0.426
v = 0.65 m/s
Thus, the magnitude and direction of the net force on the crate while it is on the rough surface is 24.67 N, opposite as the motion of the crate.
The net work done on the crate while it is on the rough surface is -16.04 J.
The speed of the crate when it reaches the end of the rough surface is 0.65 m/s.
Learn more about work done here: brainly.com/question/8119756
#SPJ1
Please show work if possible! Thank you!!
A 2.0 x 103 kg roller coaster travels around a vertical 24-m radius loop. If the coaster has a tangential speed of 18 m/s at the lowest point of the loop, what is the normal force that is exerted on the coaster by the track at this point?
a. 5.3 x 10^4 N
b. 4.7 x 10^4 N
c. 3.0 x 10^4 N
d. 2.7 x 10^4 N
B. The normal force that is exerted on the coaster by the track at the lowest point is 4.7 x 10⁴ N.
Normal force exerted on the coaster at the lowest point
Fₙ = mg + mv²/r
where;
m is mass of the coasterv is speed of the coasterr is radius of the pathFₙ = (2,000 x 9.8) + (2,000 x 18²)/24
Fₙ = 46,600 N
Fₙ = 4.7 x 10⁴ N
Thus, the normal force that is exerted on the coaster by the track at the lowest point is 4.7 x 10⁴ N.
Learn more about normal force here: https://brainly.com/question/14486416
#SPJ1
A certain kind of glass has an index of refraction of 1.640 for blue light of wavelength 440 nm and an index of 1.600 for red light of wavelength 690 nm. If a beam containing these two colors is incident at an angle of 30.0° on a piece of this glass, what is the angle between the two beams inside the glass?
The angle between the two beams inside the glass is mathematically given as
<(BR)= 0.563°
What is the angle between the two beams inside the glass?Generally, the equation for an angle for blue is mathematically given as
[tex]< B= arcsin( sin\theta / i )[/tex]
Therefore
<B= arcsin( sin30 / 1.660 )
<B= 17.53°
For angle for red
<R= arcsin(sin30 / 1.610)
<R= 18.09°
For the angle in between
<(BR)= 18.093 - 17.530
<(BR)= 0.563°
In conclusion, the angle between the two beams inside the glass
<(BR)= 0.563°
Read more about angle
https://brainly.com/question/13954458
#SPJ1
A 80-kg base runner begins his slide into second base when he is moving at a speed of 3.0 m/s. The coefficient of friction between his clothes and Earth is 0.70. He slides so that his speed is zero just as he reaches the base.
(a) How much mechanical energy is lost due to friction acting on the runner?
______J
(b) How far does he slide?
________m
The mechanical energy lost due to friction is 360 J.
The distance the runner slides is, s = 0.655 m
What is the mechanical energy of the runner?
The mechanical energy lost due to friction acting on the runner is equal to the change in kinetic energy.
Change in Kinetic energy = 1/2m(v -u)²
Change in Kinetic energy = 80 * (0 - 3.0)²/2
Change in Kinetic energy = 360 J
Mechanical energy lost = 360 J
Distance he slide is determined using the formula below as follows:
Acceleration of runner = coefficient of friction * acceleration due to gravity
acceleration, a = 0.7 * 9.8 = 6.86
v² = u² - 2as
s = v² + u²/2a
s = 0 + 3³/2 * 6.86
s = 0.655 m
In conclusion, the mechanical energy lost due to friction is the loss in kinetic energy.
Learn more about friction and kinetic energy at: https://brainly.com/question/20241845
#SPJ1
a quantity of gas is contained in a sealed container of fixed volume the temperature of the gas is increased
The average kinetic energy of the gas's molecules directly relates to its temperature. Faster moving particles will more frequently and violently hit the container walls. Because of this, the force acting on the container's walls increases, increasing the pressure.
What happens when the temperature of a gas is increased?We know that temperature is proportional to the average kinetic energy of a sample of gas. The proportionality constant is (2/3)R and R is the gas constant with a value of 0.08206 L atm K-1 mol-1 or 8.3145 J K-1 mol-1.The average kinetic energy and the velocity of the gas particles striking the container walls rise as the temperature rises. As the temperature rises, the pressure must as well since pressure is the force the particles per unit of area exert on the container.The molecules in a gas gain more energy and can move more quickly as it is heated. The pressure will rise, and there will be greater impacts on the container walls. On the other hand, cooling the molecules will cause them to slow down and lower the pressure.To learn more about gas volume and temperature, refer to:
https://brainly.com/question/26141963
#SPJ9
When the volume of gas increased the KE of gases particles increases and hit the walls of container which increases the pressure on the walls .
What if gas will increase?
The gas expands in a closed container . The molecules strike and hit each other therefore the pressure at the walls increase.
According to ideal gas law , when volume is cnstant the Pressure and temperature both will increase.
to learn more about Gas laws click herehttps://brainly.com/question/17817006
#SPJ9
The motor of a weed trimmer spins
at 9,000 rpm. The amount of time
required for the motor to reach this
speed would NOT be affected by...
A. the distribution of
trimmer line inside the
spool
B. the mass of the spool
containing the trimmer
line
C. the direction in which
the torque is applied
The speed of the trimmer is not affected by the the distribution of trimmer line inside the spool. Option A
What is a weed trimmer?The weed trimmer is a device that is used to trim the grasses on a lawn or a field. This device has a rotating shaft that does the actual trimming of the grasses.
The speed of the trimmer is not affected by the the distribution of trimmer line inside the spool thus it does not affect the amount of time required to reach 9,000 rpm speed.
Learn more about weed trimmer:https://brainly.com/question/23160904
#SPJ1
Forces always act in ________. A. Solitude B. Pairs C. Unpredictable ways D. Interesting ways
Two vectors A and B have precisely equal magnitudes. In order for the magnitude of A + B to be larger than the magnitude of A - B by the factor n, what must be the angle between them?
Answer:
[tex]\alpha=arccos[\frac{(a^2+b^2)(n-1)}{2ab(n+1)}].[/tex]
Explanation:
1) for A+B: a²+b²-2abcos(π-α);
2) for A-B: a²+b²-2abcos(α);
3) according to the condition (A+B):(A-B)=n, then
[tex]n=\frac{a^2+b^2-2abcos(\pi-a)}{a^2+b^2-2abcos(a)}; \ = > \ n=\frac{a^2+b^2+2abcos(a)}{a^2+b^2-2abcos(a)}; \ = > \ cos(\alpha)=\frac{(a^2+b^2)(n-1)}{2ab(n-1)}.[/tex]
describe one similarity and one difference between the velocity on the reference circle and the velocity on the pendulum
SHM can be acquired by perpendicular projection of uniform circular motion of a particle on its diameter such a particle is called reference particle and its circular path is called reference circle.
A pendulum reaches its maximum velocity when the block is at its lowest point (the pendulum is vertical and pointing straight down). We can then use the term for conservation of energy to determine the maximum height of the block.
What is the velocity at the bottom of a pendulum?
As the pendulum swings downward, gravity converts this potential energy into kinetic energy, so that at the bottom of the swing, the pendulum bob has zero potential energy, and its kinetic power, (1/2)mv2, equals the initial potential energy (mgh). (So the velocity, v, equals √(2gh).)
To learn more about pendulum, refer
https://brainly.com/question/26449711
#SPJ9
The light beam shown in the figure below makes an angle of = 24.8° with the normal line NN' in the linseed oil. Determine the angles and '. (The refractive index for linseed oil is 1.48.)
The angle of refraction of the light beam is determined as 16.46 ⁰.
Angle of refraction of the light beamn = sin i / sin r
where;'
n is refractive indexi is angle of incidencer is angle of refractionAngle between the ray and the normal = incident angle = 24.8⁰
1.48 = sin (24.8) / (sin r)
sin r = sin (24.8) / (1.48)
sin r = 0.283
r = sin ⁻¹(0.283)
r = 16.46 ⁰
Thus, the angle of refraction of the light beam is determined as 16.46 ⁰.
Learn more about angle of refraction here: https://brainly.com/question/15838784
#SPJ1
Given that the acceleration of gravity at the surface of Mars is 0.38 of what it is on Earth, and that Mars' radius is 3400 km , determine the mass of Mars.
The mass of the planet Mar, given the data from the question is 6.45×10²³ Kg
Data obtained from the questionAcceleration due to gravity of Earth = 9.8 m/s²Acceleration due to gravity of Mar (g) = 0.38 × 9.8 = 3.724 m/s²Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²Radius (r) = 3400 Km = 3400 × 1000 = 3400000 mMass (M) =? How to determine the mass of Marg = GM / r²
Cross multiply
GM = gr²
Divide both sides by G
M = gr² / G
M = (3.724 × 3400000²) / 6.67×10¯¹¹
M = 6.45×10²³ Kg
Learn more about gravitational force:
https://brainly.com/question/21500344
#SPJ1
A 1500 kg aircraft going 35 m/s collides with a 2000 kg aircraft that is parked and they stick together after the collision and are going 15 m/s after the collision. If they skid for 112.1 m before stopping, how long (in seconds) did they skid? Hint: Are the aircraft moving at a constant velocity after the collision or do they experience an acceleration?
The two aircrafts are skidded for 14.9 s.
To find the answer, we need to know about the Newton's equation of motion.
What is the Newton's equation that relates velocity, distance, acceleration and time?As per Newton's equation of motion
V²-U²= 2aSV= U+atV= final velocity, U = initial velocity, S = distance, a= acceleration, t= timeWhat's the acceleration of the aircrafts that skidded from 35 m/s after the collision for 112.1 m before achieving 15 m/s?Here, U = 35 m/s, V = 15m/s, S= 112.1 mSo, 15²- 35²= 2a×112.1= 224.2a=> a= -1000/224.2= -4.5 m/s²
What's the time taken to stop if these aircrafts are de-accelerated by 4.5 m/s² from 35m/s?Here, U = 35 m/s, V=15 m/s a= -4.5 m/s²35= 15+(-4.5)t=> t= 20/4.5 = 4.4 s
Thus, we can conclude that the two aircrafts are skidded for 4.4 s.
Learn more about the Newton's equation of motion here:
brainly.com/question/25545050
#SPJ1
Define a dipole. Hence, write the expression for calculating the electric moment of a dipole
Answer:
Explanation:
An electric dipole is formed by two point charges +q and −q connected by a vector a. The electric dipole moment is defined as p = qa
The four tires of an automobile are inflated to a gauge pressure of 2.02×10^5 Pa. Each tire has an area of 217 cm^2 in contact with the ground. Determine the weight of the automobile.
The weight of the automobile is 17,533.6 N.
Weight of the automobile
The weight of the automobile is calculated as follows;
P = F / A
F = (W/4)
P = (W/4) / A
P = W/4A
W = 4AP
where;
P is pressure A is areaW = (4)(217 x 10⁻⁴ m²)(2.02 x 10⁵ Pa)
W = 17,533.6 N
Thus, the weight of the automobile is 17,533.6 N.
Learn more about weight here: https://brainly.com/question/2337612
#SPJ1
Which type of wave interaction is shown in the photo?
The wave interaction that is shown in the photo is refraction as light moves from air to water.
What is refraction?Refraction refers to the change in the frequency of a wave and the direction of the wave as it moves from one medium to another. We know that waves makes a body under water to look slightly different than when it is in air.
Thus, the wave interaction that is shown in the photo is refraction as light moves from air to water.
Learn more about refraction:https://brainly.com/question/14760207
#SPJ1
Compare and contrast visible light, infrared light, and ultraviolet light.
Answer:
NE BİLİM
Explanation:
PUAN İÇİN YAZIYORUM SEN BENİ GÖRMEZDEN GEL ANLDIN MI DOSTUM bu arada Suriye >>>>>
if f=30 m=4 calculate value of m in equation
m=f/a
Answer:
a = 7.5
Explanation:
m = f/a
f = 30
m = 4
Thus;
a = f/m
a = 30/4
a = 7.5
Calculate the speed of a satellite moving in a stable circular orbit about the Earth at a height of 4930 km .
The speed of the satellite moving in a stable circular orbit about the Earth is 5,916.36 m/s.
Speed of the satellite
v = √GM/r
where;
M is mass of EarthG is universal gravitation constantr is distance from center of Earth = Radius of earth + 4930 kmv = √[(6.626 x 10⁻¹¹ x 5.97 x 10²⁴) / ((6371 + 4930) x 10³)]
v = 5,916.36 m/s
Thus, the speed of the satellite moving in a stable circular orbit about the Earth is 5,916.36 m/s.
Learn more about speed here: https://brainly.com/question/6504879
#SPJ1
a. A light wave moves through glass (n = 1.5) at an angle of 15°. What angle will it have when it moves from the glass into water (n = 1.33)? (4 points)
b. Draw a ray diagram to locate the image of the arrow, as refracted through the lens shown. Write 2 - 3 sentences describing the type of image and its size relative to the object. What type of mirror could be used to form an image of the same type and size? (8 points)
c. An object is located 65 cm from a concave mirror with a focal length of 45 cm. What is the image distance? Is the image real or virtual? (6 points)
Answer in detail with the correct units and steps to solve. Will mark brainliest.
A wave is a phenomenon that does not cause a permanent displacement in the particles of the medium through which it passes. And it transfers energy from one end of the medium to the other. Examples of waves include light waves, sound waves, water waves, x-rays, radiowaves, etc. Thus the required answers for each part of the question are:
a. The angle that the light wave would have is [tex]7.5^{o}[/tex].
b. The type of mirror that can be used is a plane mirror.
c. The image distance is 146.3 cm.
ii. The image formed by the mirror is a real image.
a. When a ray of light passes from one medium to another, then refraction occurs. The refraction depends on the refractive index of the medium considered.
Thus from Snell's law, we have:
refractive index, n, = [tex]\frac{Sin i}{Sin r}[/tex]
where: i is the angle of incidence, and r is the refracted angle.
Now given that n = 1.5, and i = 15.
Then;
n = [tex]\frac{Sin i}{Sin r}[/tex]
1.5 = [tex]\frac{Sin 15}{Sin r}[/tex]
Sin r = [tex]\frac{0.2588}{1.5}[/tex]
= 0.17253
r = [tex]Sin^{-1}[/tex] 0.17253
= 9.936
r ≅ [tex]10^{o}[/tex]
Since the light wave now moves from the glass into water, the determined refracted angle now becomes its angle of incidence in water. So that;
n = [tex]\frac{Sin i}{Sin r}[/tex]
1.33 = [tex]\frac{Sin 10}{Sin r}[/tex]
Sin r = [tex]\frac{0.17365}{1.33}[/tex]
= 0.1306
r = [tex]Sin^{-1}[/tex] 0.1306
= 7.504
r = [tex]7.5^{o}[/tex]
Therefore, the angle that the light wave would have is [tex]7.5^{o}[/tex].
b. The image formed would be the same size as that of the object. And also the same distance as that of the object to the pole of the lens.
The type of mirror that can be used is a plane mirror.
The ray diagram is attached to this answer.
c. From the mirror formula;
[tex]\frac{1}{f}[/tex] = [tex]\frac{1}{u}[/tex] + [tex]\frac{1}{v}[/tex]
where; f is the focal length of the mirror, u is the object's distance to the mirror, and v is the image's distance to the mirror.
Given; u = 65 cm, and f = 45 cm, then:
[tex]\frac{1}{45}[/tex] = [tex]\frac{1}{65}[/tex] + [tex]\frac{1}{v}[/tex]
[tex]\frac{1}{v}[/tex] = [tex]\frac{1}{45}[/tex] - [tex]\frac{1}{65}[/tex]
[tex]\frac{1}{v}[/tex] = [tex]\frac{20}{2925}[/tex]
v = [tex]\frac{2925}{20}[/tex]
v = 146.25 cm
The image distance is 146.3 cm.
ii. The image formed by the mirror is a real image.
For more clarifications on the image formed by a concave mirror, visit: https://brainly.com/question/27877616
#SPJ1
Derive the following equations of motion
1. v = at
2. s = ut + at²
3. v² = u² + 2as
according to definition of acceleration
a=v-u/t
t=v-u/a(equation 1)
according to the formula of average velocity
v+u/2*s/t
s=v+u/2*t(equation 2)
now putting the value of t in equation 2
s=v+u/2*v-u/a
s=v^2-u^2/2a
v^2=u^2+2as
please make me brainlist
When this surgical procedure is used to reduce the risk of stroke it will correct stenosis in the artery the most common cause of this condition is the buildup of plaque that forms in the artery name this procedure
Endarterectomy is used to reduce the risk of stroke and correct the stenosis in the artery.
What is carotid artery stenosis?The primary blood vessels that supply the brain with blood and oxygen are the carotid arteries.
The narrowing of these arteries is referred to as carotid artery disease. Carotid artery stenosis is another name for it. The main factor causing constriction is atherosclerosis.
This fat deposit reduces the blood flow to the brain which cause a stroke.
Carotid endarterectomy is a surgical treatment to remove plaque, an accumulation of fatty deposits that causes a carotid artery to become narrowed.
Hence, an Endarterectomy is used to reduce the risk of stroke, it will correct stenosis in the artery.
For a detailed study about coronary artery disease refer given link https://brainly.com/question/1347334.
#SPJ1.
9.80 1. The density of mercury is 13600 kg/m³. What is this value in g/cm³? 2. Find the mass of water which will fit in a large tank measuring 2 m x 1 m x 20 cm. Density of water is 1000 kg/m³ or 1.0 g/cm³. 3. Find the volume of a lump of softwood whose mass is 120 g. Density of softwood is 0.6 gcm-3 or 600 kgm-³. -3
Answer:
1. 13..6 grams per centimeters cubed.
2. Mass = 400kg
3. Volume = 200cm = 2m
Explanation:
1. The conversion for kg/m^3 to g/cm^3 is divide by 1000.
2. [tex]density=\frac{mass}{volume}[/tex]
[tex]1000=\frac{mass}{2 * 1 * 0.2}[/tex]
[tex]1000*0.4=mass[/tex]
[tex]400kg = mass[/tex]
3. [tex]density=\frac{mass}{volume}[/tex]
[tex]0.6=\frac{120}{volume}[/tex]
[tex]volume=\frac{120}{0.6}[/tex]
[tex]volume= 200cm[/tex]
What is the formula that relates current and voltage?
A. V = I/R
B. V = R/I
C. V = IR
D. V = I^2/R
"V = IR" is the equation that relates current to voltage.
Relationship between current and voltage:
Georg Simon Ohm, a German scientist, and mathematician carried out an experiment in 1827 using multiple circuits with variable wire lengths. He took measurements of both the voltage across the electrical component and the current flowing through the circuit.Ohm's law outlines the connection between voltage, current, and resistance. According to the equation,V = IR or,
I = V/R,
the amount of current (I) flowing through a circuit is inversely
related to the amount of resistance (r) and directly proportional to
the voltage (v).
Therefore the correct answer is option C i.e., "V = IR".
Learn more about voltage here:
https://brainly.com/question/13521443
#SPJ1
Which of the following is an example of an offensive action?
An example of an offensive action is B. kicking a ball into the goal
Something that is offensive upsets or embarrasses people because it is rude or insulting.
What is a example of an offensive action?Offensive is an arranged campaign or plan of action, normally created by the military or planned to achieve some specific political aim or goal. A military plan to strike is an example of a military offensive. A plan to fight the war on medications is an instance of an offensive.
What are the types of offensive operations?The four types of offensive operations are move to contact, attack, exploitation, and pursuit.
Leaders direct these offensive operations sequentially and in combination to generate highest combat power and destroy the enemy.
To learn more about an offensive action, refer
https://brainly.com/question/18732645
#SPJ9