the the rectangular components of acceleration for a particle are ax = 3t and ay= (30-10t) where a is in m/ s^2 . if the particles start from rest at the origin. find the radius of curvature of the path at the instant 2 second​

The pressure of seawater will be 2.14*107 N/m2 and the density will be 8.53*103 kg/m3.

Pressure is a type of force applied to an object by another object over a surface area. Pressure is measured in units of force per unit area and is usually expressed in terms of pascals (Pa).

The bulk modulus of elasticity, K, is a measure of the stiffness of a material and is defined as the ratio of bulk stress to the resulting strain. In this problem, we need to calculate the density and pressure at a depth of 2500 m, based on the given bulk modulus and 98 kPa pressure at the surface.
To solve this problem, we will use the equation K = -dp/dρ, where dp is the change in pressure with depth and dρ is the change in density with depth. Since we are given the bulk modulus and pressure on the surface, we can calculate the change in density with depth as follows:
dρ = -K*dp/dz
where dp = rgdz and rg is the gravity of the Earth. Substituting these values, we get:
dρ = -2.34*109*98*103/(9.8*2500) = -7.78*103 kg/m3
This means that for every metre of depth, the density of seawater decreases by 7.78*103 kg/m3. Therefore, at a depth of 2500 m, the density of seawater will be:
ρ = 1030 - 7.78*103*2500 = 8.53*103 kg/m3
Similarly, we can calculate the pressure at a depth of 2500 m using the equation P = P0 + rgdz, where P0 is the pressure at the surface. Substituting the values, we get:
P = 98*103 + 9.8*2500*8.53*103 = 2.14*107 N/m2
Therefore, at a depth of 2500 m, the pressure of seawater will be 2.14*107 N/m2 and the density will be 8.53*103 kg/m3.

To learn more about pressure
https://brainly.com/question/30129462
#SPJ4

Yes, that's correct. THD is typically expressed as a percentage, with lower values indicating a cleaner signal with less distortion.

Total harmonic distortion (THD) is a measure of the harmonic distortion present in a signal and is defined as the ratio of the sum of the powers of all harmonic components to the power of the fundamental frequency.

Total harmonic distortion (THD) is a measure of the harmonic distortion present in a signal and is defined as the ratio of the sum of the powers of all harmonic components to the power of the fundamental frequency. THD is typically expressed as a percentage, with lower values indicating a cleaner signal with less distortion.

Complete question:

When harmonic distortion is specified as a composite value representing all the harmonics, it is called total harmonic distortion. ¿True or false?

Learn more about THD:

https://brainly.com/question/16045097

#SPJ4

A geotechnical investigation is primarily concerned with testing the physical properties of the soil, to provide recommendations for foundation requirements, excavation stability, drainage and buried concrete design.

Answer:

Geotechnical investigation is: A surface exploration and subsurface exploration of a site.

Explanation:

What does Geotechnical investigation mean?

It's a primarily concerned with testing the physical properties of the soil, to provide recommendations for foundation requirements, excavation stability, drainage and buried concrete design.

Why Geotechnical is important?

It allow's Engineers to evaluate the stability and strength of the ground, including slopes and soil deposits, assess risks such as soil aggressivity to buried concrete, and help to determine what type of foundations and earthworks would be required within a (project) for example.

Answer:

90!

Explanation:

The answer is twice the number of the crankshaft gear. (45 x 2 = 90)

The size of the THHN feeder conductor required for two 230 VAC, 7.5 HP motors, one 115 VAC, 1.5 HP short time motor and one 230 VAC, 0.75 HP motor is 3 AWG.

To calculate the size of the THHN feeder conductor, we first need to calculate the total load current for all the motors. To do that, we will use the following formula: I = (HP x 745.7) / (V x 1.73).

For the two 7.5 HP motors, the total load current is (7.5 x 745.7) / (230 x 1.73) = 29.7 A. For the 1.5 HP short-time motor, the total load current is (1.5 x 745.7) / (115 x 1.73) = 8.85 A. For the 0.75 HP motor, the total load current is (0.75 x 745.7) / (230 x 1.73) = 4.41 A.

Adding all the load currents yields a total load current of 42.96 A. Then we can refer to the NEC Table 310.15(B)(16) to determine the minimum THHN feeder conductor size. At 42.96 A, the minimum THHN feeder conductor size is 3 AW.

For more questions like THHN feeder click the link below:

https://brainly.com/question/27603941

#SPJ4

Answer:

Programming paradigms are different approaches to programming. Each paradigm is concerned with the way code is written, structured, and organized. The main paradigms are procedural, object-oriented, functional, and logical. Each of these has its own set of rules and principles that guide how code is written and executed. Procedural programming focuses on implementing algorithms and breaking tasks down into smaller steps. Object-oriented programming focuses on breaking tasks down into objects and classes. Functional programming focuses on writing code that is easy to read and maintain. Logical programming focuses on using logic to solve problems.

Explanation:

Hope It Help You

Answer:

A programming paradigm is a style or approach to programming, characterized by the way in which the programmer writes the code. There are several different programming paradigms, including:

Explanation:

Imperative programming: This is the most traditional style of programming, in which the programmer writes code that specifies a series of steps to be carried out in order to solve a problem. Imperative programming languages include C, C++, and Java.

Object-oriented programming: In this style of programming, the programmer writes code in the form of objects, which are self-contained units that combine data and behavior. Object-oriented programming languages include Java, Python, and C#.

Functional programming: In functional programming, the programmer writes code in the form of functions, which are self-contained units that take input and produce output, without modifying any external state. Functional programming languages include Haskell, Lisp, and ML.

Logic programming: In this style of programming, the programmer writes code in the form of logical statements, and the language's runtime system is responsible for finding a solution that satisfies all of the statements. Logic programming languages include Prolog and Mercury.

Declarative programming: In declarative programming, the programmer specifies what the desired result should be, rather than how to achieve it. The language's runtime system is responsible for finding a way to produce the desired result. Declarative programming languages include SQL and regular expressions.

A geotechnical investigation is an assessment of the physical and chemical properties of soil, rock, and other subsurface materials. It is typically carried out in order to evaluate the suitability of the ground for a particular purpose, such as the construction of a building or bridge.

Site investigation is the process of collecting and evaluating data about the soil, rock, and groundwater conditions at a particular location. This is usually done before designing concrete foundations, as the characteristics of the subsurface materials can have a significant impact on the stability and integrity of the foundation.

A geotechnical report is a document that summarizes the results of a geotechnical investigation. It typically includes information about the geology of the site, the properties of the subsurface materials, and any potential geotechnical hazards or issues that may affect the proposed development. The report may also include recommendations for how to address any issues that are identified, such as installing foundation reinforcement or providing additional support for the structure.

Site investigations typically involve a number of different techniques, such as soil and rock sampling, borehole drilling, and laboratory testing. The specific techniques used will depend on the nature of the project and the type of information that is needed.

The next step in the process is to purify the juice. This is done by adding calcium hydroxide which removes impurities and non-sucrose components. The juice is then heated and concentrated in vacuum pans.

What is vacuum?
Vacuum is an empty space devoid of matter. It is a space that is completely void of any matter, including molecules, atoms, and subatomic particles. It has zero pressure and is a state of matter considered to be more rare than a gas, liquid, or solid. Vacuums can be generated artificially in a laboratory setting or can occur naturally in the absence of air or other gasses. Vacuum environments are used in many scientific and industrial applications and are especially important in the field of physics, where they are used to study the behavior of matter on a microscopic scale.

This process drives off the water and forms a thick syrup containing 85-95% sucrose. The syrup is then seeded with sugar crystals and further heated in a process called inversion. Finally, the sugar is packaged for sale or further processed into other forms of sugar such as brown sugar, powdered sugar, and so on.

To learn more about vacuum
https://brainly.com/question/14806112

#SPJ4

The function that causes values of both x and to develop the highest feasible moment at A according to the provided suspended mass is written as 14715 Nm (clockwise).

The quantity of matter or substance that makes up a thing is known as its mass. The unit of measurement is the kilogramme, abbreviated as kg. It's crucial to keep in mind that mass differs from weight. While weight varies with changes in gravity, mass never changes.

We have identified the following values,

adjust for any angle 00 ≤ θ ≤ 900 any extension 0 ≤ x ≤ 5 m.

So,

Let us consider an equation to calculate the moment using θ and x as variables around point A.

⇒ ((9−1.5) + x) (cosθ) (120) (9.81)

When we are simplifying the given equation gives us:

⇒ MA ​= (7.5+x) 1177.2 cosθ

Here the maximum moment will develop if θ = 0 and x=5 m.

Then, by substituting these values gives us:

⇒ MA​=(7.5+x)1177.2cosθ

⇒ MA​=(7.5+5)1177.2cos00

Thus, the value of MA is written as, 14715 Nm (clockwise)

To learn more about the mass, follow the link;

https://brainly.com/question/19694949

#SPJ1

The Pilot Car is the vehicle that alerts drivers to oversized loads. So, the correct answer to the question is a. Pilot car.

What exactly is a Pilot Car?

A pilot car is a vehicle that is used to guide and support convoys of large vehicles or trucks carrying heavy loads. Pilot cars can be sedans, SUVs, vans, or pickup trucks and must be equipped with lights, flags, and a CB radio in order to communicate with the oversized vehicle. ‍

To know more about Pilot Cars, visit: https://brainly.com/question/30002465

#SPJ4

A.B's real component is 0.457. Ab is imaginary component 43.67. A/real B's portion is 1.583. A/imaginary B's part is -0.319.

to create a phase transformation in (a substance): to transform alcohol into sugar. To invert or transfer. to assert unauthorized legal title to (personal property).

Consider the following cormplex number.

[tex]$$n=5.6+j 6.6$$[/tex]

Consider the formula for conrplex to polar conversion[tex]$x+j y=r \angle \theta^{\circ}$[/tex]

Where

[tex]$$\begin{aligned}& r=\sqrt{x^2+y^2} \\& \theta=\tan ^{-1}\left(\frac{y}{x}\right)\end{aligned}$$[/tex]

Calculate the magnitude of[tex]$n$.[/tex]

[tex]$$[/tex]

[tex]\begin{aligned}& A=\sqrt{5.6^2+6.6^2} \\& A=8.655\end{aligned}$$[/tex]

Calculate the phase of[tex]$n$.[/tex]

[tex]$$[/tex]

[tex]B=\tan ^{-1}\left(\frac{6.6}{5.5}\right)$$[/tex]

[tex]$$B=49.685^{\circ}$$[/tex]

(b)

Consider the following complex numbers.

[tex]$$\begin{aligned}& A=9.9+j 2.9 \\& B=6.1+j 5.3\end{aligned}$$[/tex]

Calculate[tex]$A \cdot B$.[/tex]

[tex]& A \cdot B=83.36 \angle 57.3^{\circ} \\& \text { Calculate } \frac{A}{B} \\& \frac{A}{B}=\frac{9.9+j 2.9}{6.1+j 5.3} \\& \frac{A}{B}=\frac{9.9+j 2.9}{6.1+j 5.3} \times \frac{6.1-j 5.3}{6.1-j 5.3} \\& \frac{A}{B}=\frac{(9.9+j 2.9)(6.1-j 5.3)}{6.1^2+5.3^2} \\& \frac{A}{B}=1.16-j 0.53 \\[/tex]

[tex]& \frac{A}{B}=\sqrt{1.16^2+0.53^2} \angle \tan ^{-1}\left(\frac{-0.53}{1.16}\right) \\& \frac{A}{B}=1.276 \angle-24.65^n \\& A=8.4 \angle 39^{\circ} \\& B=5.2 \angle 50.4^{\circ} \\& A \cdot B=\left(8.4 \angle 39^{\circ}\right)\left(5.2 \angle 50.4^{\circ}\right) \\[/tex]

[tex]& A \cdot B=(8.4 \times 5.2) \angle 39^{\circ}+50.4^{\circ} \\& A \cdot B=43.68 \angle 89.4^* \\& A \cdot B=43.68 \cos \left(89.4^{\circ}\right)+j 43.68 \sin \left(89.4^{\circ}\right) \\& A \cdot B=0.457+j 43.67 \\&\end{aligned}[/tex]

[tex]$$Calculate $\frac{A}{B}$[/tex]

[tex]$$\begin{aligned}& \frac{A}{B}=\frac{8.4 \angle 39^{\circ}}{5.2 \angle 50.4^{\circ}} \\& \frac{A}{B}=\left(\frac{8.4}{5.2}\right) \angle 39^{\circ}-50.4^{\circ} \\& \frac{A}{B}=1.615 \angle-11.4^{\circ} \\& \frac{A}{B}=1.615 \cos (-11.4)+j 1.615 \sin (-11.4) \\& \frac{A}{B}=1.583-j 0.319\end{aligned}$$[/tex]

Real part of[tex]$A \cdot B$ is $0.457$[/tex]

imaginary part of[tex]$A \cdot B$ is $43.67$[/tex]

Real part of [tex]$\frac{A}{B}$ is $1.583$[/tex]

Imaginary part of[tex]$\frac{A}{B}$ is $1.583$[/tex][tex]$\frac{A}{B}$ is $1.583$[/tex]

To know more about convert visit:

https://brainly.com/question/12053471

#SPJ4

A.B's real component is 0.457. Ab is imaginary component 43.67. A/real B's portion is 1.583. A/imaginary B's part is -0.319.

To learn more about wordlengths refer to:

https://brainly.com/question/15886722

#SPJ4

The number of gallons in a swimming pool in the given question can be classified as a ratio level measurement.

The highest of the four hierarchical levels of measurement is the ratio level measurement. Data recording accuracy is determined by the levels or scales of measurement. The measurement becomes more difficult as the level increases.

The features of the other 3 levels are all present in the ratio level. At the ratio level, values can take on a true zero, be categorised, ordered, have equal intervals, and more.

While interval and ratio variables are quantitative variables, nominal and ordinal variables fall under the category of categorical variables. Quantitative data allows for a much wider range of statistical tests than categorical data.

Learn more about ratio level measurement

https://brainly.com/question/14739567

#SPJ4

The minimum length of the curve meeting the SSD requirements is 643.72 ft.

What is SSD?

From the given question, we have the grades, [tex]g_{1}=+1.25%[/tex], [tex]g_{2}=-2.25%[/tex], and the design speed, [tex]v=65[/tex] mi/h

So, [tex]SSD=vt+\frac{v^{2} }{2g(f \pm \frac{n}{100}) }\\\implies SSD=1.47(65)(2.5)+\frac{65^{2} }{30(0.347826 \pm \frac{1.25}{100}) }\\\implies SSD=630'[/tex]

The length of the vertical curve is given as, [tex]L=2(SSD)-\frac{2158}{A}[/tex]

When SSD>L, we have\

[tex]L=2(630)-\frac{2158}{-2.25-1.25}\\\implies L=1876.57 ft[/tex]

When SSD<L, we have

[tex]L=\frac{A(SSD)^{2} }{2158} \\\implies L=\frac{(-2.25-1.25)(630)^{2} }{2158} \\\implies L=643.72 ft[/tex]

Hence, the minimum length of the vertical curve is 643.721 ft.

To learn more about SSD from the given link

https://brainly.com/question/22279858

#SPJ4

According to the question, net use \\Romulus\AlbaLonga is the correct syntax.

What is syntax?
Syntax is the set of rules and principles that govern the structure of sentences in a given language. It is a component of grammar that focuses on the arrangement of words and phrases to form correct sentences. Syntax helps to determine the meaning of a sentence and provides clarity for the reader. Syntax also plays an important role in writing, as it helps to create coherent and effective sentences that convey the right message. Syntax is a complex subject and involves the use of a variety of terms such as syntax, morphology, semantics, and pragmatics. Syntax also includes the use of punctuation and other stylistic devices. By understanding syntax, one can learn how to properly construct sentences, enabling them to communicate effectively in writing.

To learn more about syntax
https://brainly.com/question/14398309

#SPJ4

Answer: The main difference between contact relays and communication relays is the type of signals that they are designed to handle, with contact relays being used to control the flow of electricity in a circuit and communication relays being used to transmit data or signals from one location to another.

Explanation: The main difference between contact relays and communication relays is the type of signals that they are designed to handle. Contact relays are used to control the flow of electricity in a circuit by opening and closing electrical contacts, while communication relays are used to transmit data or signals from one location to another.Contact relays are typically used in applications where it is necessary to switch electrical circuits on and off, such as in control panels and automated systems. They are usually designed to handle relatively low-frequency electrical signals and are typically not suitable for transmitting data or high-frequency signals.On the other hand, communication relays are used to transmit data or signals from one location to another, and are typically designed to handle a wide range of frequencies and data types. They can be used to transmit voice, data, and video signals over a variety of mediums, including wire, fiber optic cables, and wireless transmission.

In comparison  to type II motor units, type I motor units could best be described as B: "Type I motor units are recruited first."

Type I or type S (slow) is a slow twitch, a fatigue-resistant unit with the smallest force or twitch tension and slowest contraction. Type I motor unit contains oxidative enzymes. On the other hand, type II or type FR (fast, resistant) is a fast twitch, a fatigue-resistant unit with larger forces and faster contraction times. Type II contains oxidative and glycolytic enzymes.

In a comparison of both type I and type II motor units, type I motor units are found to be recruited first.

"

The complete question:

Type I motor units could best be described by which of the following in comparison to type II motor units

a. Type I motor units are faster than type II.

b. Type I motor units are recruited first.

c. Type I motor units are recruited after type II.

d. Type I motor units are larger than type II.

"

You can learn more about Type I motor units at

https://brainly.com/question/13589753

#SPJ4

The next step in the process is to crystallize the juice. The pale yellow juice is heated until the temperature reaches about 80°C, at which point the sucrose in the juice begins to form into crystals.

What is sucrose?
Sucrose is a type of sugar composed of glucose and fructose molecules bound together. It is a naturally occurring disaccharide found in many plants, where it serves as a form of energy storage. Sucrose is the most common sugar in the human diet and is used in a wide variety of food products. It is found in many processed foods and can be added to foods to enhance flavor. Sucrose is usually extracted from sugar cane or sugar beets, then processed into granulated sugar, which is used in baking or to sweeten drinks.

These crystals are then separated from the liquid in a centrifuge to produce raw sugar crystals. The remaining liquid, known as molasses, is then processed further to remove the remaining sucrose, creating a more viscous dark syrup. The raw sugar crystals are then washed and dried, and are ready to be packaged and sold as raw sugar.

To learn more about sucrose
https://brainly.com/question/211758

#SPJ4

According to the question of chemical , both Tech A and Tech B are correct.

What is chemical?
Chemistry is a branch of science that studies the composition, structure, and properties of matter, as well as the changes it undergoes during chemical reactions. It is the study of the composition, structure, and properties of matter, and the changes it undergoes during chemical reactions. It involves the study of the interactions between atoms and molecules, and the energy changes that accompany these interactions. Chemistry is a foundational science, as it is necessary to understand the properties and behavior of matter in order to understand the behavior of the elements, molecules, and compounds that make up the world.

Dust masks should be used when painting, and a respirator should be used when the threshold limit value (TLV) for a chemical is exceeded.

To learn more about chemical
https://brainly.com/question/30134631

#SPJ4

The standard overload protection for a 2 hp, 115 V, single phase motor has a nameplate rating of 21.50 A shall not be rated greater than 21.50 A amperes.

What is motor?
Motor is an electro-mechanical device which converts electrical energy into mechanical energy. It is widely used in industrial and domestic applications to produce rotational motion for machines. Motors are available in a variety of sizes and types, ranging from small DC motors to large AC synchronous motors. Motors are used to power a wide range of machines, from small fans and pumps to large industrial machines such as elevators, cranes, and conveyors. Motors can be powered by electricity, batteries, or fuel, and can be used to move objects in different directions. Motor control systems can be used to control the speed and direction of a motor, allowing for precise and efficient control of a machine. Motors are essential components of modern machines and are used in a wide variety of devices such as electric vehicles, robots, and home appliances.

To learn more about motor
https://brainly.com/question/13002418

#SPJ4

The letters A to H on the blank, 'A' being the first step, and so on is as follows:

8-F, 9-E, 10-B, 11-C, 12-G, 13.D 14.A

In mathematics, a sequence is an ordered list of objects where repetitions are allowed. It has members and is comparable to a set (also called elements, or terms). The number of elements determines the length of the sequence (possibly infinite). In contrast to a set, the same elements can appear multiple times in a sequence at different positions, and unlike a set, the order matters.

Formally, a sequence can be defined as a function from natural numbers (the positions of the sequence's elements) to the elements at each of those positions. You can think of an indexed family, which is a function from any index set, as a generalisation of the concept of a sequence.

Learn more about sequence

https://brainly.com/question/21961097

#SPJ4

The angle grinder disc is turned at speeds that range from 5000 to 12,000 rpm.

An angle grinder is a tool for rough grinding and cutting. An angle grinder tool with the correct disc can replace a variety of instruments, making even the most time-consuming and labor-intensive tasks faster and easier.

The term rpm refers to the number of times per minute that something will go around in a circle. The term rpm stands for revolutions per minute.' Both engines were set at 2,500 rpm.

Therefore, the angle grinder disc is spun at speeds ranging from 5000 to 12,000 revolutions per minute.

To learn more about angle grinder, refer to the link:

https://brainly.com/question/29563148

#SPJ1

The 36,000 pound single axle load is twice as much as the 18,000 pound single axle load, so it is twice as much stress on the pavement.

What is axie load?
Axie Load is a decentralized application (dApp) that allows users to earn cryptocurrency rewards simply by playing games. The platform focuses on providing fun, engaging and rewarding experiences for both gamers and crypto owners. The games are designed to be easy to learn, but difficult to master, making them suitable for players of all skill levels. Axie Load also integrates with popular blockchain projects such as Ethereum, allowing users to store their rewards in their own wallets. With its unique combination of gaming and crypto rewards, Axie Load is an exciting platform for users looking to explore the world of blockchain gaming.

To learn more about axie load
https://brainly.com/question/14452903

#SPJ4

The procedure is as follows in C++: double base calcPyramidVolume. Length, two bases. Double pyramid, width, Height.

The parameter variable for the following function prototype has a data type of double. Using the C double data type, high-precision floating-point data or integers are saved (up to 15 to 17 digits). There are large decimal number values recorded. In comparison to float data, values data may store twice as much information. As a result, it is referred to as a double data type. The double data type of the C programming language is used to store high-precision floating-point data or integers in computer memory. The double data type is so named because it can hold data that is twice as large as the float data type. Eight bytes, or 64 bits, make up a double.

Learn more about Double data type here:

https://brainly.com/question/29846304

#SPJ4

Answer:

it is okay depending on how u drive

The system automatically can communicate with each other and adjust system operation to match the heat load and operating conditions.

What is system operation?
System operation is the process of managing, controlling, and monitoring the operations of a computer system or network. It encompasses the planning and implementation of system operations, including the coordination of hardware, software, and communication components. System operation includes activities such as system configuration, system monitoring, performance tuning, system backup, system recovery, and system maintenance. System operation ensures that the system or network is secure, reliable, and available to users. It also involves troubleshooting and responding to incidents, analyzing system performance, and identifying areas for improvement. System operation is critical to the success of any organization, as it ensures the availability, reliability, and security of the system or network.

To learn more about system operation
https://brainly.com/question/29990235

#SPJ4

Princeton has a long tradition of service and civic engagement, and I am proud to be part of this legacy.

I have always been passionate about giving back to my community and helping those in need. I have participated in volunteer programs to help feed the homeless, tutor disadvantaged children, and provide other forms of community service.

I am also committed to making a positive impact on the environment by taking part in various initiatives to reduce my carbon footprint. I am currently a member of the Princeton Environmental Action Group and will be taking part in their upcoming campaigns to reduce waste and promote sustainable practices on campus.

I am also part of the Princeton Student Climate Initiative, which is dedicated to raising awareness about climate change and advocating for policy changes that will help protect the environment. I look forward to continuing my commitment to service and civic engagement during my time at Princeton, and I know that by working together, we can make a positive difference in our community.

Learn more about Princeton :

https://brainly.com/question/30076023

#SPJ4

The velocity of airplane will be 317.4 m/s.

The velocity of an airplane flying at a standard altitude of 5 km can be calculated using the stagnation pressure of the pitot tube mounted at the nose.

The stagnation pressure of the pitot tube was measured at 0.957 bar. Assuming the airplane is flying at high subsonic speed and flow is compressible, the velocity of the airplane can be calculated using the equation:

Velocity (v) = sqrt[2*(pstag-pamb)/ρ]

Where pstag is the stagnation pressure (0.957 bar), pamb is the ambient pressure (0.1013 bar at 5 km altitude), and ρ is the air density (1.225 kg/m3).

Plugging in the given values, the velocity of the airplane is 317.4 m/s.

To learn more about airplane, click here:

https://brainly.com/question/24752362

#SPJ4

The  difference in voltage across the two loads is 6 V.

In a series circuit, the total resistance is equal to the sum of the individual resistances. In this case, the total resistance of the circuit is 2 Ω + 4 Ω = 6 Ω.

The current in a series circuit is the same through all of the loads. This means that the same amount of voltage is dropped across each load. Since the power source has a voltage of 12 V, and the total resistance of the circuit is 6 Ω, the current in the circuit can be calculated using Ohm's Law:

I = V/R

= 12 V / 6 Ω

= 2 A.

Since the same current flows through both loads and the same amount of voltage is dropped across each load, there is no difference in voltage across the two loads. Both loads experience a voltage drop of:

12 V / 2

= 6 V.

Learn more about series circuit from

https://brainly.com/question/24707814
#SPJ1

a) The power transmitted by the belt, is 5.53 hp and (b) the work done in one minute of sanding, in Btu is 37500 Btu.

What is power?
Power is the ability to influence people, events, and outcomes. It is a fundamental element in the human experience, and it has been studied by scholars and philosophers for centuries. Power can manifest itself in many forms, such as political, economic, military, cultural, or social. It is often used to control or dominate others, and it is used to create and maintain systems of inequality and oppression. Power can also be used for good, such as providing people with the resources and ability to make positive changes in their lives and the world around them.

a) Power Transmitted by the Belt = (15 bf) x (1500 ft/min) x (0.2) = 4500 bf-ft/min = 4500 ft-lb/min = 7500 Btu/s = 5.53 hp

b) Work Done in One Minute of Sanding = (15 bf) x (1500 ft/min) = 22500 ft-lb = 37500 Btu

To learn more about power
https://brainly.com/question/25543272

#SPJ4