The curves look like a sine wave, with the number of rabbits and foxes both oscillating around a steady-state equilibrium. The presence of the constants for growth and death of both rabbits and foxes.
What is curves?
Curves is an international fitness franchise targeting women. It offers a 30-minute workout that combines strength training, cardio, and stretching. The circuit-style program is designed to help members reach their fitness goals while providing a supportive, non-threatening environment. The program also includes nutrition counseling, wellness education, and support from certified coaches.
This is because the predator-prey relationships in this system are cyclical, with the fox population increasing as the rabbit population increases, and vice versa.
To learn more about curves
https://brainly.com/question/13445467
#SPJ4
A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of
A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of curable physical deterioration.
What is Curable physical deterioration?
Curable deterioration is a type of deterioration that can be cured economically. The economic feasibility of a property is indicated if the increase in value exceeds or is equal to the anticipated cost of repairing the property. The cost of replacing or restoring the item is used as a reasonable measure of curable deterioration.
Estimating the value of items that need to be repaired, such as window replacements, repainting, weatherstripping, roof repair, loose tile fixing, faulty wiring, and heating or cooling system repairs, is part of measuring curable deterioration.
Only include the items listed above if the increase in property value will cover the cost of repairs. For example, if roof repair and loose tile repair are estimated to cost $8,000, a prospective buyer can reduce their offer price by the same amount to cover the cost of doing such repairs.
To learn more about roofs, visit: https://brainly.com/question/29517525
#SPJ4
Tech A says that if you are unsure of what personal protective equipment (PPE) to use to perform a job, you should just use what is nearby. Tech B says that air tools are less likely to shock you than electrically powered tools. Who is correct
According to the question of personal protective equipment, tech B is correct.
What is personal protective equipment?
Personal Protective Equipment (PPE) is any equipment, clothing, or device designed for use on the body to protect the wearer from injury or infection. This can include items such as gloves, safety glasses, protective clothing, hard hats, respirators, and face masks. Proper use of PPE is important to help reduce the risk of exposure to hazardous materials and environments, as well as the spread of infection. PPE is most effective when used in combination with other safety measures, such as engineering controls, administrative controls, and good hygiene practices.
Air tools are powered by compressed air and are considered to be safer than electrically powered tools because they are not connected to an electrical source.
To learn more about personal protective equipment
https://brainly.com/question/30003482
#SPJ4
The moist Unit Weight of a soil is 116 pounds per cubic foot. The moisture content of this soil is 17% when the degree of Saturation is 60%. Determine: a. Void Ratio b. Specific Gravity of Soil Solids c. Saturated Unit Weight
The moisture content of this soil is 17% when the degree of Saturation is 60%. The void ratio will be 0.44, Specific Gravity of Soil Solids will be 2.66, Saturated Unit Weight = 139.2 pounds per cubic foot.
What is soil?
Soil is the natural material found on the surface of the Earth, consisting of organic matter, minerals, gases, liquids, and organisms, which together support life. It is the foundation of terrestrial ecosystems and provides nutrients for plants, animals, and microorganisms. Soil is essential for food production, land restoration, carbon storage, and land degradation prevention. Soil is made up of a combination of organic and mineral components, with each component having its own unique properties. Organic matter, such as dead plants and animals, is the main source of food for living organisms in the soil. Minerals, such as clay, sand, and silt, provide structure and stability to the soil.
To learn more abou soil
https://brainly.com/question/14912771
#SPJ4
gearbox design calculation
Answer:Gearbox design calculations involve a variety of factors, including the type of gearbox, the size and type of gears, the torque and speed requirements, the materials used, and the environmental conditions. The calculations also involve the selection of the appropriate gear ratios, the selection of the appropriate bearings, and the selection of the appropriate lubrication system. Additionally, the calculations must take into account the safety and reliability of the gearbox.
Explanation:
5 . Which of the following is true about vehicles displaying a diamond-shaped sign that indicates a hazardous load
The following is true about vehicles displaying a diamond-shaped sign that indicates a hazardous load:
They must stop before a cross railroad track.
What is hazardous load?A hazardous load is any load determined by the Minister to be capable of posing a risk to health, safety, or property when transported on a public road. A hazardous load is defined as any load that has been prescribed by the Council in the Gazette as being capable of posing a risk to health, safety, and property when transported along the Regional Trunk Road Network.
A hazardous substance is any substance that is I listed, classified, or regulated in accordance with any environmental law; (ii) any petroleum product or by-product, asbestos-containing material, lead-based paint or plumbing, polychlorinated biphenyls, radioactive materials, or radon; or (iii) any other substance that is the subject of regulatory action by any governmental entity in accordance with any environmental law.
Learn more about hazardous load
https://brainly.com/question/28197708
#SPJ4
To observe the structure of Beauvais Cathedral's roof and the form of the flying buttresses that hold its vaults in place, you would consult which type of architectural drawing:
To observe the structure of Beauvais Cathedral's roof and the form of the flying buttresses that hold its vaults in place, you would consult a sectional drawing of architectural drawing.
What is architectural drawing?
Architectural drawing is a visual representation of a proposed or existing building or structure. It is used to communicate ideas and plans for the design of a project. The drawings are typically done by an architect, an architectural technician, or a draftsman. Architectural drawings are typically composed of multiple components, including floor plans, elevations, sections, details, and sometimes 3D renderings. They are used to illustrate how different parts of the building fit together, what materials will be used, and how the project will interact with its environment.
To learn more about architectural drawing
https://brainly.com/question/22150647
#SPJ4
An inverter or ac module is required to automatically ________ its output when utility power is lost.
An inverter or ac module is required to automatically switchover its output when utility power is lost.
What is an inverter?
An inverter is an electrical device that converts direct current (DC) to alternating current (AC). It is a type of power electronic converter that is used to convert low-voltage DC electricity from sources such as batteries or solar panels into a higher voltage AC output. Inverters allow for the use of DC power sources such as batteries to power AC appliances, and are commonly used in recreational vehicles and off-grid energy systems. They are also used in adjustable speed drives, uninterruptible power supplies, and in many consumer electronics applications. Inverters come in a variety of sizes ranging from small microcontrollers that control a single appliance, to large industrial models that are used to power entire buildings.
To learn more about inverter
https://brainly.com/question/28086004
#SPJ4
Tech A says that a safety data sheet (SDS) contains information on procedures to repair a vehicle. Tech B says that you only need an SDS after an accident occurs. Who is correct
According to the question of vehicle, tech B is correct.
What is vehicle?
Vehicle is a general term used to describe any mode of transportation that carries people or goods from one place to another. Examples of vehicles include cars, buses, boats, planes, trains, bicycles, and motorcycles. Vehicle is a noun that can refer to any type of transportation, either for people or for cargo. Vehicles are powered by various sources, such as fuel, electricity, pedals, or sails.
An SDS is used to document any hazardous materials that may have been released during an accident, as well as to provide instructions for cleaning up and disposing of the hazardous material. It does not provide instructions on how to repair a vehicle.
To learn more about vehicle
https://brainly.com/question/28539698
#SPJ4
A highway construction company operates a quarry. During the last 5 years, the amount extracted each year was 60,000, 50,000, 58,000 60,000, and 65,000 tons. The mine is estimated to contain a total of 2.5 million tons of usable stones and gravel. The quarry land had an initial cost of $3.2 million. The company had a per-ton gross income of $30 for the first year, $25 for the second year, $35 for the next 2 years, and $40 for the last year. The rate for percentage depletion is 5% (10)
(a) Determine the depletion charge each year, using the two depiction methods. Assume all depletion amounts are less than 50% of taxable income.
(b) If the quarry operation is reevaluated after the first 3 years of operation and estimated to contain a total of 1.5 million tons remaining, rework part (a).
Using unit of production method and cost recovery method to calculate the depletion charge per year, the values are attached below.
What is Depletion ChargeDepletion charge is a non-cash expense on an income statement that is used to allocate the cost of a natural resource, such as timber or minerals, over its estimated useful life. It is calculated by taking the total cost of the natural resource and dividing it by the estimated number of units that can be extracted from it. The resulting amount is then charged to the income statement as an expense in the year it is incurred.
(a)
a) Using the Units of Production Method:
Year 1: Depletion Charge = (2.5 million tons x $30) x 5% = $37,500
Year 2: Depletion Charge = (2 million tons x $25) x 5% = $25,000
Year 3: Depletion Charge = (1.5 million tons x $35) x 5% = $26,250
Year 4: Depletion Charge = (1 million tons x $35) x 5% = $17,500
Year 5: Depletion Charge = (0.5 million tons x $40) x 5% = $10,000
Total Depletion Charge = $106,250
b) Using the Cost Recovery Method:
Year 1: Depletion Charge = ($1.5 million x 50%) x (60,000/2.5 million) = $18000
Year 2: Depletion Charge = ($1.5 million x 50%) x (50,000/2.5 million) = $15000
Year 3: Depletion Charge = ($1,5 million x 50%) x (58000/2.5 million) =
$17400
Learn more on depletion charge here;
https://brainly.com/question/29343315
#SPJ1
Calculate LER for the same wing if we increase the span to 0. 245 m. By increasing the span, we also increase the glider weight to 0. 0523 newtons
The LER of the same wing is 0.21 using the chord values.
What is LER?In agriculture, the term "land equivalent ratio" refers to the proportion of land area needed for monoculture (single-crop farming) to yield the same amount of yield as intercropping (polyculture).
The FAO defines the land equivalent ratio (LER) as the ratio of the area used for sole cropping to the area used for intercropping in order to produce an equal amount of yield at the same management level. The result is the sole-crop yields multiplied by the sum of the intercropped yield fractions.
We must use a chord, so I'm assuming that it is 0.045 m in length.
The formula provides the Area.
Area = span × chord
Area = 0.245 × 0.045
Area = 0.011 m²
We then divide the area obtained by the glider weight we obtain the final result.
LER = area / weight
LER = 0.011 / 0.0523
LER = 0.21
As a result, the Lee of the same wing is 0.21 using the chord values.
Learn more about land equivalent ratio
https://brainly.com/question/14825472
#SPJ4
Why is it so important that you need to know when calculate a bevel gear two (2) different numbers of gear teeth are to be know?
It is important to know the number of teeth on the two gears when calculating a bevel gear because the number of teeth determines the gear ratio, which in turn determines the torque and speed at which the gears will operate.
How to calculate the gear ratio?The gear ratio is calculated by dividing the number of teeth on the driving gear by the number of teeth on the driven gear.
If the number of teeth is not known, it would be impossible to accurately calculate the gear ratio and determine the performance of the gear set.
Additionally, the number of teeth also affects the meshing pattern and the contact ratio between gear teeth, which is also important to the gear's performance.
Read more about gear teeth here:
https://brainly.com/question/12761665
#SPJ1
how does learning about the brain and nervous system contribute to your own Self and Social Awareness?
Learning about the brain and nervous system can contribute to self and social awareness in several ways.
First, understanding how the brain and nervous system function can help you to better understand your own thoughts, feelings, and behaviors. For example, if you learn about the role of certain brain regions in emotion regulation, you may be better able to recognize when you are feeling overwhelmed or stressed and take steps to manage those emotions.
Second, learning about the brain and nervous system can also help you to better understand the thoughts, feelings, and behaviors of others. For example, if you understand how the brain processes social information and influences social behavior, you may be better able to recognize when someone is feeling stressed or upset and respond in a more empathetic and supportive way.
To conclude, learning about the brain and nervous system can help you to develop a greater sense of self-awareness and empathy, which can in turn improve your relationships with others and enhance your overall sense of well-being.
Hope This Helps You!
For the systems described by the following equations, with the input x (t) and output y(t), determine which of the systems are linear and which are nonlinear. Dy / dt + 2y (t) = x2 (t) dy / dt + 3ty (t) = t2 x (t) 3y (t) + 2 = x (t) dy / dt + y2 (t) = x (t) (dy / dt )2 + 2y (t) = x (t) dy / dt + (sin t) y (t) = dx / dt + 2x (i) dy / dt + 2y (t) = x (t) dx / dt y (t) = f 1 -infinity x (tau) d tau
The first equation is linear, the second equation is nonlinear, the third equation is nonlinear, the fourth equation is nonlinear, the fifth equation is nonlinear, and the sixth equation is nonlinear.
What is equation?
An equation is an expression that contains an equal sign and relates two or more mathematical quantities. It typically consists of constants, variables, and symbols, and can be written in different forms such as standard form, slope-intercept form, and factored form. Equations are used to describe relationships between variables, and they can be used to solve a wide range of problems, from basic arithmetic to advanced calculus and physics. Equations are also used to model real-world phenomena, such as electricity, kinematics, and quantum mechanics. By studying equations and their solutions, we can gain a deeper understanding of the physical world around us.
To learn more about equation
https://brainly.com/question/24179864
#SPJ4
when using the route command at a command prompt, which entry indicates the default route?
Regardless of whether a default static route is set up, the "default-information originate" command is used to advertise a default route into OSPF.
Static routing is the practice of using a manually specified routing entry rather than information from traffic generated by dynamic routing. Although it isn't always the case, network administrators frequently manually configure static routes in addition to adding entries to a routing table. In contrast to dynamic routing, static routes have been fixed and remain the same despite network configuration changes. Static and dynamic routing are not mutually exclusive. A router often combines both dynamic routing and static routing to maximize routing efficiency and provide fall backs in the case that dynamic routing information cannot be transmitted. As a last-resort gateway or in stub networks, static routing may also be used.
Learn more about Static routing here:
https://brainly.com/question/29359545
#SPJ4
distinguish between the cis-acting regulatory elements referred to as promoters and enhancers.
Answer: ones on white chocolate and ones on a birthday cake
Explanation:
what was the main source of radio exposure for indie rock in the 1990s?
Answer: The main source of radio exposure for indie rock in the 1990s was college radio.
Explanation: College radio stations were especially important for indie rock bands, as they provided an alternative to the mainstream music played on commercial radio stations. College radio stations provided indie rock bands with a platform to reach a wider audience, and many of these bands gained a large following as a result. College radio stations also provided an outlet for independent labels to promote their music, which allowed indie rock to gain more exposure.
The moist weight of 0.2 ft3 of a soil is 23 lb. The moisture content and the specific gravity of the soil solids are determined in the laboratory to be 11% and 2.7, respectively. Calculate the following:
a. Moist unit weight (lb/ft3)
b. Dry unit weight (lb/ft3)
c. Void ratio
d. Porosity
e. Degree of saturation (%)
f. Volume occupied by water (ft3)
In the given question, Moist unit weight = 115lbs/ft³, Dry unit weight = 103.6 lbs/ft³, Void ratio = 0.626, Porosity = 0.385 and Degree of saturation = 47.4%
What is Porosity?Porosity, also known as void fraction, is a measure of the void (i.e., "empty") spaces in a material. It ranges from 0 to 1, or as a percentage, between 0% and 100%, and represents the volume of voids over the total volume. Some tests, strictly speaking, measure the "accessible void," or the total volume of void space that is reachable from the surface (cf. closed-cell foam).
Porosity in a substance or part can be tested in a variety of ways, including through industrial CT scanning. The word "porosity" is used in a variety of disciplines, including pharmaceutics, ceramics, metallurgy, materials, manufacturing, petrophysics, hydrology, earth sciences, soil mechanics, and engineering.
a. Moist unit weight
W/V = 23/0.2 = 115lbs/ft³.
b. Dry unit weight
89℅ of 115 = 103.6 lbs/ft³
c. Void ratio = volume of void/ volume of total sample
= (2.7 × 62.4)/103.6
= 0.626
d. Porosity = 0.626/1+0.626
= 0.385
e. Degree of saturation = 47.4%
Learn more about Porosity
https://brainly.com/question/2593663
#SPJ4
which condition normally lowers the water table
Answer: Droughts, pumping effects, and rainfall variations affect the groundwater level height.
Explanation: If a well is pumped at a faster rate than the aquifer around it is recharged by precipitation or other underground flow, then water levels in the well can be lowered.
raw sugar cane is taken into a process to create sugar, which is essentially sucrose. the raw cane is approximately 16% sucrose, 63% water, and the rest fiber by mass. juice from the cane is extracted by passing the cane through a series of crushers. about 5% extra mass of water is added to the sugar cane prior to this step to help in the extraction process. the crushed cane and liquid juice is sent to a filter press that creates a cake that contains 4% of the weight of the cane juice, which has a composition similar to the overall non-fiber content of the raw cane. the filtrate is sent to an evaporator where enough water is evaporated to obtain a pale yellow juice that is 41% water. a
The next step in the process is to crystallize the juice. The pale yellow juice is heated until the temperature reaches about 80°C, at which point the sucrose in the juice begins to form into crystals.
What is sucrose?
Sucrose is a type of sugar composed of glucose and fructose molecules bound together. It is a naturally occurring disaccharide found in many plants, where it serves as a form of energy storage. Sucrose is the most common sugar in the human diet and is used in a wide variety of food products. It is found in many processed foods and can be added to foods to enhance flavor. Sucrose is usually extracted from sugar cane or sugar beets, then processed into granulated sugar, which is used in baking or to sweeten drinks.
These crystals are then separated from the liquid in a centrifuge to produce raw sugar crystals. The remaining liquid, known as molasses, is then processed further to remove the remaining sucrose, creating a more viscous dark syrup. The raw sugar crystals are then washed and dried, and are ready to be packaged and sold as raw sugar.
To learn more about sucrose
https://brainly.com/question/211758
#SPJ4
A(n) _________ is a set of permissions that is attached to an object.
a. access control list (ACL)
b. Subject Access Entity (SAE)
c. object modifier
d. security entry designator
What is geotechical investigation?
A geotechnical investigation is primarily concerned with testing the physical properties of the soil, to provide recommendations for foundation requirements, excavation stability, drainage and buried concrete design.
Answer:
Geotechnical investigation is: A surface exploration and subsurface exploration of a site.
Explanation:
What does Geotechnical investigation mean?
It's a primarily concerned with testing the physical properties of the soil, to provide recommendations for foundation requirements, excavation stability, drainage and buried concrete design.
Why Geotechnical is important?
It allow's Engineers to evaluate the stability and strength of the ground, including slopes and soil deposits, assess risks such as soil aggressivity to buried concrete, and help to determine what type of foundations and earthworks would be required within a (project) for example.
Which of the following is one way to manage the time invested in social media marketing?
a. Leverage tools like Hootsuite that are designed to improve efficiencies.
b. Hire an outside agency.
c. Only spend time on one social media site at a time.
d. Install times on employee computers to monitor time spent on social media.
e. None of these.
To determine whether the marketing campaign will add value to the business, the marketing agency should apply the Present Net Value formula.
A calculation known as the Present Net Value brings all of an investment's future cash flows to the present. The company must identify the revenue totally attributed to the marketing campaign in order to evaluate the campaign marketing strategy as a prospective investment. By doing this, the company will be able to determine the annual inflows (sales) that must be deducted from the outflows (marketing expenses). Every year's net value is discounted at a certain rate, and if the Present Net Value is more than 0, the marketing plan is anticipated to add value to the company. To determine whether the marketing campaign will add value to the business, the marketing agency should apply the Present Net Value formula.
Learn more about Present Net Value here:
https://brainly.com/question/14242912
#SPJ4
Which of the following steps should a high school teacher take first when introducing procedures at the beginning of the year: A. Explaining the details of the procedures
B. Correcting misunderstandings about the procedures
C. Reinforcing effective use of the procedures
D. Practicing the procedures regularly with the class
Option A is correct because the details of the procedures should be explained before they are practised at this age level.
Options B, C, and D are incorrect because, while these steps are necessary, students must first understand the procedures.
How to teach procedures to your students?
The key to making your classroom run smoothly and efficiently is to teach procedures. If you take the time to teach your class how to do things, I guarantee you will have more time to focus on academics in the long run.
STEP 1 – PROCEDURES START WITH YOU
Before you can teach your students procedures, you must first envision how you want your classroom to look, sound, and feel on a daily basis. This means that you must consider these issues before the start of the school year.
STEP 2 – PUT YOUR PROCEDURES INTO SIMPLE STEPS
Once you've decided on the procedure that will get you to your ideal classroom, it's time to break it down into simple, easy-to-follow steps. When you do this, keep your students in mind. The language and number of steps will differ if you teach Pre-K or Kindergarten versus 3rd, 4th, or 5th grades. I've always found the K.I.S.S. method to be effective. Keep it as simple as possible.
STEP 3 – TEACH THE PROCEDURES
Introduce the need for procedureThe procedureModel the procedurePractice the procedurePut the procedure into actionTo learn more about how to write description and procedures, visit: https://brainly.com/question/28717367
#SPJ4
What is the difference between cinema and theatre ?? I want the difference
Answer:
The main difference between theatre and cinema is that theatre involves live performances like plays, opera, ballet, and musical theatre, while cinema involves films.
Theatre is a building or outdoor area that houses dramatic presentations, and stage entertainments. In British English, cinema refers to a building that contains an auditorium for viewing films – this is equivalent for movie theatre in American English.
Explanation:
Similarities between theatre and movies
Both movies and theatre focus on social evils and problems and represent them to society through play and cinema. In both, the purpose of the cases is to bring positive changes in society. ...
Both theater plays and movies are forms of entertainment that allow an audience to enter different worlds. ...
Both theater plays and movies are forms of entertainment
Answer:
Theatre typically involves live performances, while cinema usually contains a moving picture that is prerecorded or premade and being projected.
Examples of theatre include:
BalletsPlaysMusicalsExamples of cinema include:
MoviesShort FilmsTo learn more about the difference between cinema and theatre, check out the link below:
https://brainly.com/question/26197760
A rigid pavement on a new interstate with 3 lanes in each direction has been conservatively designed with a 12-inch slab, an Ec of 5.5 million psi, a concrete modulus of rupture of 700 psi, a load transfer coefficient of 3.0, an initial PSI of 4.5, and a TSI of 2.5. The overall standard deviation is 0.35, the modulus of subgrade reaction is 290 lb/in3, and the drainage coefficient is 0.9. The pavement was designed for 600 30-kip tandem axles per day and 1400 20-kip single axle loads per day total for all 3 lanes. If the desired reliability is 90%, how long will the pavement last in years
The pavement will last between 41 and 50 years with a reliability of 90%.
A road surface, also known as pavement, is a durable surface material that is laid down on an area intended to support vehicular or pedestrian traffic, such as a road or walkway.
First, calculate the number of equivalent single axle loads (ESALS):
ESALS = 600*30 + 1400*20 = 55600.
Next, calculate the design life (L) using the formula: L =
(ESALS/18000)^(1/TSI) * (Ec/PSI)^(-1/2*SD).
Plugging in the values,
L = (55600/18000)^(1/2.5) * (5.5 x 10^6/4.5)^(-1/0.7) = 41.8.
Lastly, calculate the reliability (R) using the formula:
R = (1-LT^(-1/2))*100.
Calculating for a pavement life of 41 years and 50 years gives a reliability of 90% for both values.
For more questions like Pavement click the link below:
https://brainly.com/question/14249997
#SPJ4
Which of the following is NOT a factor in the quality of digital video? a.- frame rate and resolution c. compression technique b. memory technology in your camera de color and bit depth
The choices that best describe the process of digitization are: Option A: binary-stored video. Option C converts analog video to digital video.
Information transformation into a digital format is referred to as digitization. Be aware that in this format, data is organized into discrete units of data called bits. As a result, the following options best represent the digitization process: Option A: binary-stored video. Option C converts analog video to digital video. This is due to the fact that digital video is a key technology for both video conferencing and video messaging in addition to being a key technology for digital television. This was demonstrated by its use in messaging apps for confidential conversations and for hosting virtual conferences for business meetings amongst personnel.
Learn more about Digitization here:
https://brainly.com/question/28368732
#SPJ4
A stall occurs when the smooth airflow over the unmanned airplane`s wing is disrupted, and the lift degenerates rapidly. This is caused when the wing
A stall happens when the smooth airflow over the unmanned airplane`s wing is disrupted, and the lift degenerates rapidly. This is caused when the wing "exceeds its critical angle of attack."
The angle of attack refers to the angle at which the airplane's wing meets the air that is flowing over it. When an airplane actually is taking off, it is lifting the nose up into the air. And, if that nose continues to rise ultimately it reaches a point where the air is not able to smoothly flow over the wing, causing the airplane to drop. And, this is the point when the airplane exceeds its critical angle of attack.
Exceeding the critical angle of attack is known to be a stall. This has no concern with the engine stalling, it just concerns with the wings not producing enough lift to keep the airplane in the air.
You can learn more about critical angle of attack at
https://brainly.com/question/13209325
#SPJ
The motor feeder conductor size for a quantity of (three) 15 hp, 208V, three-phase motors and a quantity of (three) 3 hp, 208V, single-phase and a quantity of (three) 1 hp, 120v, single phase motors will be __________________. Assume all terminations are rated at 75 degrees C and aluminum THHN conductors will be used.
The motor feeder conductor size for the described system would be 4 AWG aluminum THHN rated for a 75-degree C temperature.
The total horsepower for the three-phase motors is 45 hp and the total horsepower for the single-phase motors is 4 hp. The total horsepower is then 49 hp.
The next step is to calculate the load in amps as follows:
(49 hp x 746 watts)/(208 volts x 1.25 efficiency factor)
= 177 amps.
With 177 amps as the total load, the next step is to select the conductor size using the NEC Table 310.16. A 4 AWG aluminum THHN conductor is rated for a maximum of 195 amps.
For more questions like Conductor click the link below:
https://brainly.com/question/29360867
#SPJ4
Tech A says that all hazards can be removed from a shop. Tech B says that you should disconnect an air gun before inspecting it. Who is correct
According to the question of disconnecting an air gun before inspection, tech B is correct.
What is gun?
Gun is a type of weapon that is typically used to fire bullets at a target. It is typically composed of a barrel, a chamber, a firing mechanism, and ammunition. Guns have been used for centuries as a tool for hunting, self-defense, and warfare. Guns are typically categorized by the type of ammunition they use, such as pistol, shotgun, or rifle. Guns can be used to shoot at a variety of targets, such as animals, clay pigeons, and even human targets. Guns are also used in competitive shooting sports. Although guns can be used for a variety of purposes, they have the
Although it is not possible to completely remove all hazards from a shop, it is important to take precautions such as disconnecting an air gun before inspecting it to help reduce the risk of injury.
To learn more about gun
https://brainly.com/question/17037232
#SPJ4
This new concrete allows water to flow through it quickly because it has many holes in it. What is its porosity and permeability
The permeability of different concrete designs varies. Permeable concrete is a type of concrete that is porous and allows water to pass through it. We recently used this on a project where traffic was driving over an area with drainage issues.
What exactly is porosity, and how does it relate to concrete permeability?
The volume of voids in concrete is measured by porosity. The rate of moisture flow through concrete under a pressure gradient is defined as permeability.
Moisture must be able to move through voids that are interconnected and of a certain size. Moisture flow is slowed by discontinuous pores and pores with narrow entrances. Permeability is low in a mature, well-cured, well-proportioned paste (low w/cm), even if porosity is high. Permeability is increased in porous concrete.
To know more about porosity of concrete, visit: https://brainly.com/question/14853465
#SPJ4