To create a datasheet that lists all herbs that are Perennials, Jorge will create a new query. The Perennial field has a data type of Yes/No. Which criterion should Jorge use in the query for the Perennial field

A terminology which best describe Kevin's goal in terms of expansion and contraction as needs change is: A. Scalability.

Scalability can be defined as a measure of the ability of a system to change (expansion or contraction) in performance and cost as a result of changes in demands of application and system processing, especially in a network architecture.

In this context, we can logically deduce that a terminology which best describe Kevin's goal in terms of expansion and contraction as needs change is scalability.

Read more on scalability here: brainly.com/question/14301721

#SPJ1

Complete Question:

Kevin would like to ensure that his software runs on a platform that is able to expand and contract as needs change.  Which one of the following terms best describes his goal? A. Scalability B. Elasticity C. Cost effectiveness D. Agility

In the case above, file name do not reflect best practices and as such it is No. A file name must include the date, the author, and the version number.

A file name is known to be the key identifier of a file and a Good file name need to present some clues in regards to its content, status and version.

Hence, In the case above, file name do not reflect best practices and as such it is No. A file name must include the date, the author, and the version number.

See options below

Does this file name reflect best practices?1 point

Yes. A file name should include the project name and version.

No. A file name must include the date, the author, and the version number.

Learn more about file name from

https://brainly.com/question/1982059

#SPJ1

Classes that depend on field names from parent classes are generally said to be fragile because they are very prone to coding errors.

A class can be defined as a user-defined blueprint (prototype) or template that is typically used by software programmers to create objects and define the data types, categories, and methods that should be associated with these objects.

In object-oriented programming (OOP) language, a class that is written or created to implement an interface would most likely implement all of that interface's method declarations without any coding error.

In Computer programming, we can infer and logically conclude that classes that are highly dependent on field names from parent classes are generally said to be fragile because they are very prone to coding errors.

Read more on class here: brainly.com/question/20264183

#SPJ1

ERM software modules deal with setting employee objectives, performance, and compensation. option D is the answer.

Software module are component of a program and not the main programme.

They form essential part of the main programme with or more routines. One or more modules developed separately make up a program.

ERM software can be used for various businesses and in organization settings. It helps to identify compensation and monitor performance of the organization.

Enterprise risk software (ERM) is essential in managing various risk attached to a Job.

Therefore, ERM software modules deal with setting employee objectives, performance, and compensation

Learn more on software below

https://brainly.com/question/14635097

#SPJ1

A component of a change management program which includes final testing that the software functions properly is: C) Release management.

SDLC is an acronym for software development life cycle and it can be defined as a strategic methodology that defines the key steps, phases, or stages for the design, development and implementation of high quality software programs (applications).

In Computer science, there are seven (7) phases involved in the development of a software program and these include the following;

At the final testing stage, a component of a change management program which ensure that the software functions properly is known as release management.

Read more on software here: brainly.com/question/26324021

#SPJ1

Complete Question:

What component of a change management program includes final testing that the software functions properly?

A) Request management

B) Change management

C) Release management

D) Iteration management

The type of network medium Jenny should use is wireless networks.

Given data:

Jenny should use a wireless network medium to create a network that can be accessed from any room in her house without physically connecting.

Wireless networks use radio waves or infrared signals to transmit data between devices, allowing for flexible connectivity without the need for physical cables.

Devices such as smartphones, laptops, tablets, and smart home devices can connect to the wireless network and access the internet or communicate with each other.

To learn more about wireless networks, refer:

https://brainly.com/question/31630650

#SPJ3

Answer:

coding

Explanation:

A process of assigning a code to something for classification. The process or activity writing computer program

Brenda also orders movies and television through the Internet via a(n) VOD provider, which allows users to download video for a fee.

The term video-on-demand (VOD) is known to be a kind of technology made to send video content, such as movies and television programs, directly to specific customers for quick viewing.

Note that technology is constantly growing and one need to grow along with it. services that are good is often adopted by people.

Hence, Brenda also orders movies and television through the Internet via a(n) VOD provider, which allows users to download video for a fee.

Learn more about movies from

https://brainly.com/question/27936956

#SPJ1

The on-premise approach is often chosen by organizations with an established IT infrastructure.

In an on-premises method, resources are said to be given or deployed in-house and it is one that is found within an enterprise's IT infrastructure.

Customer relationship management (CRM) is known to be a form of a technology that is often used in the act of managing all of a firm's  relationships and communications with customers and also that of potential customers.

Therefore, The on-premise approach is often chosen by organizations with an established IT infrastructure.

Learn more about CRM from

https://brainly.com/question/27373018

#SPJ1

To perform the tasks you described, you would need administrative privileges or use the appropriate commands with 'sudo'.

A directory, also known as a folder, is a file system construct used to organize and store files and other directories. It acts as a container for grouping related files and subdirectories together in a hierarchical manner. Directories are an essential part of the file system structure in modern operating systems.

Here are the steps to achieve each task:

1.  Create a directory called "projects" directly inside /home/fparker:

mkdir /home/fparker/projects

2. Change the owner and group of /home/fparker/projects to the fparker user and group:

chown fparker:fparker /home/fparker/projects

3. Create a user account named ljenkins and set "password123" as the password:

useradd ljenkins                # Create the user account

passwd ljenkins password123    # Set the password for the user

After successfully completing these steps, you will have created the "projects" directory inside /home/fparker, changed its owner and group to fparker, created a new user account named ljenkins with the password "password123," and formatted the third drive's partition with the ext4 file system.

Learn more about directory on https://brainly.com/question/29757285

#SPJ2

In the case above, the productivity suite that Paul should consider is OpenOffice, G suite.

G Suite Basic edition is known to be a kind of a suite that is made up of collaborative productivity apps that tends to give one's business professional email, shared calendars, and others.

Hence, In the case above, the productivity suite that Paul should consider is OpenOffice, G suite.

See options below

Which productivity suites should he consider?

a. Prezi, G suite

b. G suite, Zoho

c. OpenOffice, G suite

d. Zoho, Apple iWork

Learn more about financial records from

https://brainly.com/question/4954869

#SPJ1

#The loop that adds 5 to userNum while userNum is less than 20, displaying the result after each addition is given below.

A loop is a set of instructions in computer programming that is repeatedly repeated until a given condition is met.

// declaring variable userNum

var userNum = 5;

// variable ans to store all answers and print them in single line

// (as expected in sample output)

var ans = "";

// while loop, while userNum is <= 20

// (to get output 25 on screen, we need to run loop till less-than-equal) while(userNum <= 20) {

  userNum += 5;

  ans += userNum + " ";

}

// displaying final output on console

console.log(ans);  

Learn more about loops at;
https://brainly.com/question/26568485
#SPJ1

If you had two proxy servers located in the same room, what use could you make of them? B. Create a hub

A proxy server is a server program used in computer networking that stands between a client requesting a resource and the server supplying that resource.

Every computer or Ethernet-based device linked to a network hub receives data that is broadcast to all of those devices and that's what two proxy servers would be used to do.

Read more proxy servers here:

https://brainly.com/question/28075045
#SPJ1

On a Local Area Network, or LAN. MAC addresses are the identification that nodes use to communicate with each other internally. This is further explained below.

Generally, A media access control address, often known as a MAC address, is a one-of-a-kind identification that is given to a network interface controller (NIC) in order for it to be used as a network address in communications that take place inside a network segment. This use is typical in the vast majority of networking technologies based on IEEE 802, such as Ethernet, Wi-Fi, and Bluetooth.

In conclusion, On a LAN, or local area network. Nodes interact with each other inside using MAC addresses.

Read more about the MAC address

https://brainly.com/question/27960072

#SPJ1

In the case above, the thing that should be done is for one to Drop the packet.

A router is known to be a form of a physical or virtual tools that often helps one to pass information and it is said to be between two or more packet-switched computer networks.

Note that, In the case above, the thing that should be done is for one to Drop the packet.

Learn more about router from

https://brainly.com/question/24812743

#SPJ1

The three modes of data communication

The Full-duplex mode is known to have a good and better performance when compared to simplex and half-duplex mode as it is known to often doubles the utilization in terms of the capacity of the communication channel.

The simplex mode in terms of its signal is known to be sent in one direction. In half duplex mode, the signal is said to be often sent in both directions, but it is also seen as one at a time.

Learn more about communication from

https://brainly.com/question/26152499

#SPJ1

A type of loop which is specifically designed and written to initialize, test, and increment or decrement a counter variable is referred to as a for loop.

A for statement can be defined as a type of statement (loop) that is designed and written by a computer programmer to repeat an action or event in a software program for a specific number of time.

In Computer programming, a for statement is a type of loop which contains three expressions and these include the following:

In conclusion, we can infer and logically deduce that a for loop is a type of loop which is specifically designed and written to initialize, test, and update (increment or decrement) a counter variable

Read more on statements here: brainly.com/question/18736215

#SPJ1

If one uses the data above (in billions of dollars), the Gross domestic product (in billions of dollars) for this economy equals  $1,200.

Note that:

GDP (Gross Domestic Product):

Thus it will be :

Consumption + Investment + Government expenditure + (Export - Import)

Which is:

GDP = 800 + 200 + 300 + (100 - 200)

GDP = $1200 billions

See full question below

Consumption expenditures $800

Investment expenditures 200

Government purchases 300

Exports 100

Imports 200

Wages 800

8) Refer to Table above. Consider the data above (in billions of dollars) for an economy: Gross domestic product (in billions of dollars) for this economy equals

A) $2,200.

B) $1,600.

C) $1,400.

D) $1,200.

Learn more about GDP from

https://brainly.com/question/1383956

#SPJ1

IDDFS is known to use both depth-first search’s space-efficiency and also the use of breadth-first search’s fast search due to the fact that  its nodes are closer to the root and IDDFS often calls DFS for a lot of depths starting from a starting value.

The term progressive deepening is known to be if a person is said to be making effort try to approximate a given answer at every level and they often work to go deep towards the leaf nodes based on the time limit that a person have for their move.

Hence, IDDFS is known to use both depth-first search’s space-efficiency and also the use of breadth-first search’s fast search due to the fact that  its nodes are closer to the root and IDDFS often calls DFS for a lot of depths starting from a starting value.

Learn more about deepening from

https://brainly.com/question/27353529

#SPJ1

Answer: python, JavaScript, scala

Explanation:

Using the knowledge in computational language in JAVA it is possible to write a code that the document object to display the current platform in a tag in the webpage

<TABLE>

     <ROWS>

     <TR>

     <TD>Shady Grove</TD>

     <TD>Aeolian</TD>

     </TR>

     <TR>

     <TD>Over the River, Charlie</TD>

     <TD>Dorian</TD>

     </TR>

     </ROWS>

     </TABLE>

See more about JAVA at brainly.com/question/12975450

#SPJ1

Using the knowledge in computational language in JAVA it is possible to write the code being methods define a method named getWordFrequency that takes an array of strings

import java.util.*;

public class WordFrequency {

       public static int getWordFrequency(String[] wordsList , int listSize , String currWord) {

               HashMap<String , Integer> hm = new HashMap<>();

               for(String st : wordsList) {

                       String str = st.toLowerCase();

                       hm.put(str, hm.getOrDefault(str, 0) + 1);

               }

               for(String st : wordsList) {

                       String str = st.toLowerCase();

                       System.out.println(st + " " + hm.get(str));

               }

               String currWordToLowerCase = currWord.toLowerCase();

               return hm.get(currWordToLowerCase);

       }

       public static void main(String[] args) {

               // TODO Auto-generated method stub

               String[] wordsList = {"hey" , "Hi" , "Mark" , "hi" , "mark"};

               int listSize = wordsList.length;

               String currWord = "hey";

               System.out.println("The frequency of " + currWord + " is : " + getWordFrequency(wordsList , listSize , currWord));

       }

}

See more about JAVA at brainly.com/question/12978370

#SPJ1

Answer:

triangular ##&((+ hhvbh. hhhb hhv

Answer:

for i in range(1, 6):

   print(("# " * i).rstrip())

Explanation:

You need to print one hashtag, then 2, then 3, and so on. We can use Python's string multiplication to get each line quicker.

String multiplication is an easy way to repeat the same string a certain number of times. It's done by multiplying the string to a number.

For example,

"hello" * 6

>> "hellohellohellohellohellohello"

If we multiply the string "#" by any number, we would get a number of hashtags side by side, without any space. To easily avoid this, we can multiply "# " instead to automatically put a space to the right of each hashtag.

We can use a for loop that goes through range(1, 6) to print out 5 rows.

for i in range(1, 6):

Then, we can print the string "# " multiplied by i.

print("# " * i)

However, this will also put a space at the end of the string, which we do not want to print. Hence, we can use the .rstrip() method to strip the string of any spaces on the right. We will first put the whole string in parentheses, then invoke rstrip on it.

print(("# " * i).rstrip())

Let's put both lines together.

for i in range(1, 6):

   print(("# " * i).rstrip())

The media query that applies when the viewport's width is at least 600px will be:

media only screen and (min-width: 600px) {

   .benefits-container {

       flex-direction: row;

   }

Media queries are the key part of responsive web design that allows the user to create different layouts depending on the size of the viewport.

They can also be used to detect other things about the environment your site is running on.

Learn more about media query on:

https://brainly.com/question/13136637

#SPJ1

The program is an illustration of loops, functions and conditional statements

The program written in Java, is as follows:

import java.util.Scanner;

public class Main {

   public static int getFrequencyOfWord(String[] wordsList, int listSize, String currWord) {

       int wordFreq = 0;

       for (int i=0; i<listSize; i++){

           if (wordsList[i].compareToIgnoreCase(currWord)==0){

               wordFreq++;

           }

       }

       return wordFreq;

   }

       public static void main(String[] args) {

           Scanner input = new Scanner(System.in);

           int N = input.nextInt();

           String myArr[] = new String[N];

           for (int i=0; i<N; i++){

               myArr[i] = input.next();

           }

           for (int i=0; i<N; i++){      

               String searchWord = myArr[i];

               int freqCount = getFrequencyOfWord(myArr,N,searchWord);

               System.out.println(searchWord + " " + freqCount);

       }              

  }

}

Read more about java programs at:

https://brainly.com/question/26642771

#SPJ1

Answer:

FALSE is the answer of that question

I HOPE IT HELP YOU

The affirmative tú command hacer is known as haz.

The translation are:

The Affirmative tú commands is known to be one that is said to be similar  as the él/ella/Ud.

Note that this  is seen as the conjugation of the present tense and it is one that is often  used to tell another person that you are familiar with that thing.

Hence, The affirmative tú command hacer is known as haz.

Learn more about Spanish words from

https://brainly.com/question/26522612

#SPJ1

Answer:

Compared with a large-scale integrated multi-purpose computer, a quantum computer is a high-powered multipurpose application of a quantum computer.

Answer:

Presentation

Explanation:

The sixth layer of the OSI model, responsible for translation, encryption, authentication, and data compression.