Tricki Corp stock sells for $100 rights-on, and the subscription price is $90. Ten rights are required to purchase one share. Tomorrow the stock of Tricki will go ex-rights. What is Tricki's expected price when it begins trading ex-rights? (Round your answer to 2 decimal places.)$102.09$98.09$99.09$101.09

The mean weight of the six dogs is 56.5 pounds.

To find the mean weight, we sum up all the weights and divide by the number of dogs. In this case, we add up the weights 13 + 21 + 75 + 21 + 134 + 60 = 324, and since there are six dogs, we divide the sum by 6. Therefore, the mean weight is 324 / 6 = 54 pounds.

The mean is a measure of central tendency that represents the average value of a set of data. It provides a summary statistic that gives an idea of the typical value in the data set. In this case, the mean weight of the six dogs is 56.5 pounds, which indicates that, on average, the dogs weigh around 56.5 pounds. It is important to note that the mean is influenced by extreme values, such as the dog weighing 134 pounds, which can skew the average towards higher values

Learn more about mean weight here:

https://brainly.com/question/16170417

#SPJ11

A random sample is a sample that is drawn from a population in such a way that each member of the population has an equal chance of being selected. The mean is a measure of central tendency that represents the average value of a set of data.

In this scenario, a simple random sample of size n was drawn from a population that is normally distributed. The sample mean, X, was found to be 112, and the sample standard deviation, s, was found to be 10.

(a) To construct an 80% confidence interval about us if the sample size, n, is 13, we can use the formula:

CI = X ± t(α/2, n-1) * s/√n

where t(α/2, n-1) is the critical value for the t-distribution with (n-1) degrees of freedom and α is the level of significance. For an 80% confidence interval, α = 0.2 and t(α/2, n-1) = 1.340. Thus, the confidence interval is:

CI = 112 ± 1.340 * 10/√13
CI = (103.76, 120.24)

(b) To construct an 80% confidence interval about p if the sample size, n, is 24, we can use the formula:

CI = p ± z(α/2) * √(p(1-p)/n)

where z(α/2) is the critical value for the standard normal distribution and p is the sample proportion. Since the population is normally distributed, we can assume that the sample proportion is also normally distributed. For an 80% confidence interval, α = 0.2 and z(α/2) = 1.282. Thus, the confidence interval is:

CI = 112/24 ± 1.282 * √(112/24 * (1-112/24)/24)
CI = (0.38, 0.68)

(c) To construct a 95% confidence interval about p if the sample size, n, is 13, we can use the same formula as in (b), but with α = 0.05 and z(α/2) = 1.96. Thus, the confidence interval is:

CI = 112/13 ± 1.96 * √(112/13 * (1-112/13)/13)
CI = (0.38, 0.78)

(d) Yes, we could have computed the confidence intervals using the formulas provided, as long as the assumptions of normality and independence were met. However, if the sample size was small or the population was not normally distributed, we would need to use different methods, such as the t-distribution or non-parametric tests.

Learn more about mean here:

https://brainly.com/question/31101410

#SPJ11

Thad would be 4 5/12 feet next year

Fractions are defined as the part of a whole number, a whole variable or a whole element.

In mathematics, there are different fractions,

These fractions are listed as;

From the information given, we have that;

Thad is  4 1/6 feet tall.

Next year he add 1/4 foot

Convert to improper fraction

25/6 + 1/4

Find the LCM, we have;

50 + 3/12

53/12

4 5/12 feet

Learn more about fractions at: https://brainly.com/question/11562149

#SPJ1

The researcher would need to consider the size and type of cars being tested to avoid bias in the study on car safety in accidents at a set speed.

To study the safety of a car in accidents at a set speed while avoiding bias, a researcher should consider the following factors:
The size and type of cars being tested:

Ensure that a diverse range of car sizes and types are included in the study to get a comprehensive understanding of how different vehicles perform in accidents.
The age of the driver:

Include drivers of various ages to account for potential differences in reaction times and driving experience that could impact the results.

Whether the driver lives in the city or rural areas:

Consider the driving environment, as urban and rural drivers may face different challenges and conditions that could affect accident outcomes.
The type of guidance or GPS system included in each car:

Assess whether the car's navigation system and other technological features have any impact on the safety of the vehicle during accidents.
The color of the cars tested:

Although the color of a car may not directly influence its safety in accidents, including a variety of car colors in the study can help avoid any potential confounding factors or biases.
By considering these factors in your study, you can help ensure that your results are more accurate, reliable, and free from bias.

For similar question on researcher.

https://brainly.com/question/30472510

#SPJ11

Yes, to study the safety of a car in accidents at a set speed, it would be important for the researcher to consider several factors to avoid bias. The size and type of cars being tested are important because different cars have varying safety features and performance capabilities.

The age of the driver is also crucial as older drivers may have slower reflexes and reaction times than younger drivers. Whether the driver lives in the city or rural areas is another important consideration as driving conditions and road hazards can differ. The type of guidance or GPS system included in each car can also impact safety, as some systems may be more effective than others. Lastly, the color of the cars tested should also be considered as certain colors may be more visible or less visible in different lighting conditions. By taking these factors into account, the researcher can obtain more accurate and unbiased results regarding the safety of a car in accidents at a set speed.

To study the safety of a car in accidents at a set speed and avoid bias, a researcher should consider the following factors:

1. The size and type of cars being tested: Ensure that a diverse range of car sizes and types are included in the study to account for any differences in safety features or crash performance.

2. The age of the driver: Include drivers of various ages to account for differences in driving experience and reaction time, which may impact the outcome of the accidents.

3. Whether the driver lives in the city or rural areas: Including drivers from both urban and rural areas can help account for variations in driving conditions and habits that may affect the results of the study.

4. The type of guidance or GPS system included in each car: Different guidance or GPS systems may have varying levels of impact on driver attention and navigation, which could influence the results of the study. Ensure that a variety of systems are tested.

5. The color of the cars tested: While car color may not directly impact safety, it could potentially influence visibility in certain situations. Including a range of car colors in the study can help account for this factor.

Learn more about GPS at: brainly.com/question/30821063

#SPJ11

To compute (p,q) with the given inner product, we need to evaluate p(1), p(0), p(-1), q(1), q(0), and q(-1), and use them to form the dot product of the coordinate vectors [p(1), p(0), p(-1)] and [q(1), q(0), q(-1)].

Using p(t) = 6-t, we get p(1) = 5, p(0) = 6, and p(-1) = 7. Using q(t) = 3 + 2t^2, we get q(1) = 5, q(0) = 3, and q(-1) = 5. Therefore, the coordinate vectors are [5, 6, 7] and [5, 3, 5], and their dot product is (5)(5) + (6)(3) + (7)(5) = 80. Thus, (p,q) = 80.

In general, an inner product on a vector space V is a function that takes two vectors v and w in V and returns a scalar (v,w) satisfying certain properties, such as linearity in the first argument, symmetry, and positive-definiteness. One common example of an inner product on the vector space of polynomials of degree at most n is the evaluation inner product, which is defined as (p,q) = ∫[a,b] p(x)q(x) dx, where [a,b] is some interval and the integral is taken over that interval. However, if we restrict our attention to the subspace of polynomials of degree at most 2, we can define a simpler inner product by evaluating the polynomials at certain points and taking the dot product of the resulting coordinate vectors. This inner product has the advantage of being easy to compute and visualize.

To compute the inner product of two polynomials p and q with the given inner product, we evaluate the polynomials at the points 1, 0, and -1, and use the resulting coordinates to form the dot product. This yields a scalar that represents the angle between the two polynomials in a sense. In this case, we found that the inner product of p(t) = 6-t and q(t) = 3 + 2t^2 is (p,q) = 80. This means that the angle between p and q is relatively small, since the dot product is positive and relatively large. However, the precise meaning of this angle is not immediately clear without further context or geometric interpretation.

To know more about vector visit:

https://brainly.com/question/29740341

#SPJ11

The option that could happen in March to make the net change in her account $0 from January to March is, D. Her company puts a $1,000 bonus into her retirement account.  

This is because the $1,000 bonus will offset the $1,000 withdrawal that was made from the retirement account.

According to the question, if the woman made a $1,000 withdrawal from her retirement account in February and the net change in her account is $0 from January to March, then something positive must have happened in March to offset the withdrawal.

Her company putting a $1,000 bonus into her retirement account would have the same effect, making the net change in her account $0.

Therefore, option D is the correct answer to the question.

Net change refers to the overall change that occurs in a financial statement account over an accounting period.

The net change is determined by calculating the difference between the total debits and the total credits for an account during the period under review.

To know more about financial visit:

https://brainly.com/question/28319639

#SPJ11

The pairs of angles are identified as follows:

Complementary angles are two angles that add up to 90 degrees. Supplementary angles are two angles that add up to 180 degrees.

Vertical angles are two angles that are opposite each other and are formed by two intersecting lines. None of these is used when the two angles are not complementary, supplementary, or vertical angles.

Find out more on angle types here: https://brainly.com/question/28923271

#SPJ1

Answer:

[tex]\frac{x+8}{8} =5[/tex]

(x+8)/8 = 5 (make sure you use the parentheses)

Step-by-step explanation:

The unknown number is 'x'.

[tex]\frac{x+8}{8} =5[/tex]

(x+8)/8 = 5 (parentheses matter if you write it this way!)

(Add 8, then divide by 8, and the answer is 5.)

If you solve for x, the answer is 32.

You can double check that this works:

(32+8)/8 = 5

(40)/8 = 5

5=5

The probability of daily demand being less than 495 sodas is approximately 0.9893 or 98.93%.

To find the probability of daily demand being less than 495 sodas, given that the mean of demand is 410 sodas per day and the standard deviation of demand is 37 sodas per day, follow these steps:

1. Convert the demand value (495 sodas) to a z-score:
  z = (X - μ) / σ
  z = (495 - 410) / 37
  z ≈ 2.30

2. Use a z-table or a calculator with a normal distribution function to find the probability corresponding to the z-score:
  P(Z < 2.30) ≈ 0.9893

Thus, the probability of daily demand being less than 495 sodas is approximately 0.9893 or 98.93%.

To Know more about probability refer here

https://brainly.com/question/15412371#

#SPJ11

After staring at a yellow triangle and then looking at a white paper, one might perceive an afterimage of the triangle in complementary colors, such as a blue triangle on a yellow background. This is due to color adaptation and the way our eyes and brain process visual stimuli

When we stare at a colored object for an extended period, the photoreceptor cells in our eyes become fatigued and adapt to that particular color. When we shift our gaze to a neutral surface, such as a white paper, the photoreceptor cells that were adapted to the original color become less responsive, while the cells that are sensitive to the complementary color are relatively more active. This imbalance in the response of photoreceptor cells results in an afterimage appearing in complementary colors.

In the case of staring at a yellow triangle and looking at a white paper, the afterimage may appear as a blue triangle on a yellow background. This is because blue is the complementary color of yellow. The brain processes the signals from the photoreceptor cells and creates the perception of the afterimage based on this complementary color relationship.

Learn more about photoreceptor here:

https://brainly.com/question/30246048

#SPJ11

a. For a 4-disk RAID-0 (striping), each write will be spread evenly across all 4 disks. This means that each disk will receive 3 writes. Since each write takes D time units, it will take a total of 3D time units to complete the 12 writes.

b. For a 4-disk RAID-1 (mirroring), each write will be mirrored onto another disk, resulting in 6 writes total. Since each write takes D time units, it will take a total of 6D time units to complete the 12 writes.

c. For a 4-disk RAID-4 (parity), each write will be spread evenly across 3 of the disks, while the 4th disk will be used for parity. This means that each disk will receive 4 writes, and the parity disk will be written to 3 times. Since each write takes D time units, it will take a total of 4D time units to complete the writes on each data disk, and 3D time units to complete the writes on the parity disk. Therefore, it will take a total of 15D time units to complete the 12 writes on a 4-disk RAID-4.

the time it takes to complete a small workload consisting of 12 read/writes to random locations within a RAID will depend on the RAID configuration. For a 4-disk RAID-0, it will take 3D time units. For a 4-disk RAID-1, it will take 6D time units. For a 4-disk RAID-4, it will take 15D time units.

To learn more about configuration visit:

https://brainly.com/question/13410673

#SPJ11

Answer: To find the absolute maximum of the function g(x) = 2x^2 + x - 1 over the interval [-3,5], we need to evaluate the function at the critical points of g(x) that lie within the interval [-3,5] and at the endpoints of the interval.

First, we find the critical points of g(x) by taking the derivative of g(x) and setting it equal to zero:

g'(x) = 4x + 1 = 0

Solving for x, we get x = -1/4. This critical point lies within the interval [-3,5], so we need to evaluate g(x) at x = -1/4.

Next, we evaluate g(x) at the endpoints of the interval:

g(-3) = 2(-3)^2 - 3 - 1 = 14

g(5) = 2(5)^2 + 5 - 1 = 54

Finally, we evaluate g(x) at the critical point:

g(-1/4) = 2(-1/4)^2 - 1/4 - 1 = -25/16

Comparing these three values, we see that the absolute maximum of g(x) over the interval [-3,5] is 54, which occurs at x = 5.

To find the absolute maximum of g(x) = 2x^2 + x - 1 over the interval [-3,5], we need to check the critical points and the endpoints of the interval.

Taking the derivative of g(x), we get:

g'(x) = 4x + 1

Setting g'(x) = 0 to find critical points, we get:

4x + 1 = 0

4x = -1

x = -1/4

The only critical point in the interval [-3,5] is x = -1/4.

Now we check the function at the endpoints of the interval:

g(-3) = 2(-3)^2 - 3 - 1 = 14

g(5) = 2(5)^2 + 5 - 1 = 54

Finally, we check the function at the critical point:

g(-1/4) = 2(-1/4)^2 - 1/4 - 1 = -25/16

Therefore, the absolute maximum of g(x) over the interval [-3,5] is g(5) = 54.

To know more about absolute maximum, refer here :

https://brainly.com/question/29152841#

#SPJ11

The slope of the tangent line to the polar curve at the specified points is -8√3 for the polar curve T = 2cos(8) at θ = π/3, and the slope is zero for the polar curve r = 2 + sin(30) at θ = 7π/4.

The slope of the tangent line to the polar curve at the specified points is as follows:

63. For the polar curve T = 2cos(8), where θ = π/3, the slope of the tangent line can be found by taking the derivative of r with respect to θ and evaluating it at the given value of θ. The derivative of r = 2cos(8) with respect to θ is dr/dθ = -16sin(8), and when θ = π/3, the slope of the tangent line is -16sin(π/3) = -16(√3/2) = -8√3.

64. For the polar curve r = 2 + sin(30), where θ = 7π/4, the slope of the tangent line can be found by taking the derivative of r with respect to θ and evaluating it at the given value of θ. The derivative of r = 2 + sin(30) with respect to θ is dr/dθ = 0, as the derivative of a constant is zero. Therefore, the slope of the tangent line is zero.

In summary, the slope of the tangent line to the polar curve at the specified points is -8√3 for the polar curve T = 2cos(8) at θ = π/3, and the slope is zero for the polar curve r = 2 + sin(30) at θ = 7π/4.

Learn more about slope here:

https://brainly.com/question/2491620

#SPJ11

The wires on the ground are 24 feet apart.

We have,

The pole and one wire form a right triangle.

So,

Applying the Pythagorean theorem,

37² = 35² + x²

Where x is the distance of one wire from the pole.

Now,

Solve for x.

37² = 35² + x²

1369 = 1225 + x²

x² = 1369 - 1225

x² = 144

x = 12

Now,

The distance between the two wires.

= x + x

= 12 + 12

= 24 feet

Thus,

The wires on the ground are 24 feet apart.

Learn more about the Pythagorean theorem here:

https://brainly.com/question/14930619

#SPJ1

The vectors to be linearly independent, this equation must have only the trivial solution x1 = x2 = x3 = 0. This is true if and only if a is not equal to 2 or -2. Thus, the answer is (a) a = 1, -4.

To determine the values of a for which the given vectors are linearly independent, we need to set up the equation Ax = 0, where A is the matrix formed by taking the given vectors as its columns and x = (x1, x2, x3) is a vector of coefficients. If the only solution to this equation is the trivial solution x = (0, 0, 0), then the vectors are linearly independent.

Writing out the matrix and setting up the equation, we have:

| 0 a 4 | | x1 | | 1.a |

| 1 0 1 | | x2 | = | 4 |

| 3 2 2 | | x3 | | 0 |

To solve for x1, we eliminate the first column by subtracting 3 times the first row from the third row, and then subtracting the first row from the second row:

| 0 a 4 | | x1 | | 1.a |

| 1 0 1 | | x2 | = | 4 |

| 0 -3 -10| | x3 | | -3a |

We can now solve for x2 and x3 in terms of x1:

x2 = 4 - x1

x3 = (-3a + 3x1 - 10x2)/3

If the only solution to this equation is x1 = x2 = x3 = 0, then the vectors are linearly independent.

Substituting the values of x2 and x3 into the first equation, we get:

0x1 + ax2 + 4x3 = a(4 - x1) + 4((-3a + 3x1 - 10(4 - x1))/3) = -26a + 16x1 + 16.

For such more questions on Trivial solution:

https://brainly.com/question/13252722

#SPJ11

The first five terms of the sequence are: 1, 5/8, 25/64, 125/512, 625/4096.

The sequence converges and the limit is 8/3.

To find the first five terms of the sequence with [(1−3/8)][∞]=1, we can start by simplifying the expression in the brackets:

(1−3/8) = 5/8

So, the sequence becomes:

(5/8)ⁿ, where n starts at 0 and goes to infinity.

The first five terms of the sequence are:

(5/8)⁰ = 1
(5/8)¹ = 5/8
(5/8)² = 25/64
(5/8)³ = 125/512
(5/8)⁴ = 625/4096

To determine whether the sequence converges, we need to check if it approaches a finite value or not. In this case, we can see that the terms of the sequence are getting smaller and smaller as n increases, so the sequence does converge.

To find its limit, we can use the formula for the limit of a geometric sequence:

limit = a/(1-r)

where a is the first term of the sequence and r is the common ratio.

In this case, a = 1 and r = 5/8, so:

limit = 1/(1-5/8) = 8/3

Therefore, the limit of the sequence is 8/3.

To know more about geometric sequence, refer to the link below:

https://brainly.com/question/11266123#

#SPJ11

Therefore, Credit Union L has approximately $13.4 million in insured deposits.

Option (c) $13.4 million is the correct answer.

Given, CUA charges 6.3 cents per 100 dollars insured and Credit Union L pays $8,445 in NCUA insurance premiums.Since we are looking for insured deposits,

we need to find the number of dollars that Credit Union L has paid premiums on.

Hence, first, we need to calculate the amount insured by the NCUA.

Credit Union L has paid $8,445 in premiums.

We know that the NCUA charges 6.3 cents per 100 dollars insured.

So, we can set up a proportion to find the total insured amount as follows:6.3 cents/100 dollars insured = $8,445/xx = ($8,445 × 100)/6.3 centsx = $13,400,000

Therefore, Credit Union L has approximately $13.4 million in insured deposits.

Option (c) $13.4 million is the correct answer.

To know more about dollars  Visit:

https://brainly.com/question/15169469

#SPJ11

Flux of the vector field is 4π[tex]a^{3}[/tex].

To compute the flux of the vector field, vector f = x vector i + y vector j + z vector k, through the surface S, which is the sphere [tex]x^{2}[/tex] + [tex]y^{2}[/tex] + [tex]z^{2}[/tex] = [tex]a^{2}[/tex] , oriented outward, we can use the divergence theorem. The divergence theorem relates the flux of a vector field through a closed surface to the divergence of the vector field within the enclosed volume.

The divergence of vector f is:

div(f) = ∂x/∂x + ∂y/∂y + ∂z/∂z = 1 + 1 + 1 = 3

Since the sphere S is a closed surface that encloses the origin, we can use the divergence theorem to relate the flux of vector f through S to the divergence of f within the volume enclosed by S:

flux = ∫∫S f · dS = ∫∫∫V div(f) dV

where V is the volume enclosed by S.

To evaluate the triple integral, we can use spherical coordinates since the surface S is given in terms of x, y, and z in spherical form.

x = a sinφ cosθ

y = a sinφ sinθ

z = a cosφ

where 0 ≤ θ ≤ 2π and 0 ≤ φ ≤ π.

The Jacobian of the transformation is:

J = [tex]a^{2}[/tex] sinφ

Therefore, the integral becomes:

flux = ∫∫∫V div(f) dV = ∫∫∫V 3 dV = 3 ∫∫∫V dV

where the limits of integration are 0 ≤ r ≤ a, 0 ≤ θ ≤ 2π, and 0 ≤ φ ≤ π.

Evaluating the integral in spherical coordinates, we get:

flux = 3 ∫∫∫V dV = 3 ∫0-π ∫0-2π ∫0-a [tex]r^{2}[/tex] sinφ dr dθ dφ

= 3 (2π) ∫0-π ∫0-a [tex]r^{2}[/tex] sinφ dφ dr

= 3 (2π) (2[tex]a^{3}[/tex])/3

= 4π[tex]a^{3}[/tex]

Therefore, the flux of the vector field f through the surface S is 4π[tex]a^{3}[/tex].

To learn more about Flux here:

https://brainly.com/question/31977373

#SPJ4

The value of the line integral ∫CF⋅d r is -1 + 6cos(1).

To evaluate the line integral ∫CF⋅d r, we need to first parameterize the vector field F and the curve C in terms of a parameter t.

Let's start by parameterizing the curve C:

r(t) = (-3t^3, -t^2, -3t)

Next, we need to find the derivative of r(t) with respect to t:

r'(t) = (-9t^2, -2t, -3)

Now we can write the line integral as:

∫CF⋅d r = ∫(2sinx, -cosy, 10xz)⋅(-9t^2, -2t, -3) dt

= ∫[-18t^2sin(-3t^3)]dt + ∫[2tcos(t^2)]dt + ∫[-30t^4]dt

= 6cos(1) - 1 + (-6)

= -1 + 6cos(1)

Therefore, the value of the line integral ∫CF⋅d r is -1 + 6cos(1).

To know more about line integral refer here :

https://brainly.com/question/29850528#

#SPJ11

The keyword used to indicate that a field belongs to a class, and not an instance, is C) Static.

In object-oriented programming, the keyword "static" is used to define class-level variables or methods. When a field is declared as static, it means that it is shared among all instances of the class and belongs to the class itself, rather than to individual instances of the class.

By using the static keyword, the field or method can be accessed directly through the class without needing to create an instance of the class. This is useful when you want to have a variable or method that is common to all instances of the class and does not need to be replicated for each instance.

Static fields are often used for constants, counters, or shared data that needs to be accessed and modified by different instances of the class. They can be accessed using the class name followed by the dot operator, without creating an object of the class.

In summary, the static keyword is used to indicate that a field belongs to a class, not an instance, and can be accessed directly through the class name

Learn more about object-oriented programming here:

https://brainly.com/question/31741790

#SPJ11

Sure! So we know that the function g is periodic with a period of 2.

This means that the graph of y = g(x) will repeat every 2 units along the x-axis.

We also know that g(x) equals a certain value whenever 3/x is in the interval (1,3).

To graph this, we can start by finding the x-values where 3/x is in that interval.

To do this, we can solve the inequality 1 < 3/x < 3. Multiplying all parts by x (since x is positive), we get x < 3 and x > 1. So the x-values that satisfy this inequality are all the values between 1 and 3.

Now we just need to find the corresponding y-values for those x-values. We know that g(x) equals a certain value when 3/x is in (1,3), but we don't know what that value is. Let's call it y0.

So for x-values between 1 and 3, we have y = y0. For x-values outside that interval, we don't know what y is yet.

To graph this, we can plot the points (1, y0) and (3, y0), and then draw a straight line connecting them. This line represents the part of the graph where 3/x is in (1,3).

For x-values outside the interval (1,3), we know that g(x) repeats every 2 units. So we can just copy the part of the graph we've already drawn and paste it every 2 units along the x-axis.

So the final graph will look like a series of straight lines with two slanted ends, repeated every 2 units along the x-axis. The slanted ends are at (1, y0) and (3, y0), and the lines in between are vertical.

To Know more about periodic refer here

https://brainly.com/question/31700396#

#SPJ11

The standard deviation of the sampling distribution of the difference between the means of these two samples is approximately 4.268.

The standard deviation of the sampling distribution of the difference between the means of these two samples can be found using the formula:

σd = √[(σ1^2/n1) + (σ2^2/n2)]

where σ1 and σ2 are the standard deviations of the two populations, n1 and n2 are the sample sizes, and d represents the difference in sample means. Since we are assuming that the two population standard deviations are equal, we can use the pooled standard deviation:

Sp = √[((n1-1)S1^2 + (n2-1)S2^2)/(n1+n2-2)]

where S1 and S2 are the sample standard deviations. Substituting the given values, we have:

Sp = √[((20-1)10^2 + (25-1)13^2)/(20+25-2)] ≈ 11.974

Using this value and the sample sizes, we can find the standard deviation of the sampling distribution of the difference in means:

σd = √[(11.974^2/20) + (11.974^2/25)] ≈ 4.268

Therefore, the standard deviation of the sampling distribution of the difference between the means of these two samples is approximately 4.268.

To know more about standard deviation refer here:

https://brainly.com/question/23907081

#SPJ11

Since X and Y are independent, their joint density function is given by the product of their individual density functions:

fX,Y(x,y) = fX(x)fY(y) = 1 * 1/2 = 1/2, for 0 <= x <= 1 and 8 <= y <= 10

To find the density function of X+Y, we use the transformation method:

Let U = X+Y and V = Y, then we can solve for X and Y in terms of U and V:

X = U - V, and Y = V

The Jacobian of this transformation is 1, so we have:

fU,V(u,v) = fX,Y(u-v,v) * |J| = 1/2, for 0 <= u-v <= 1 and 8 <= v <= 10

Now we need to express this joint density function in terms of U and V:

fU,V(u,v) = 1/2, for u-1 <= v <= u and 8 <= v <= 10

To find the density function of U=X+Y, we integrate out V:

fU(u) = integral from 8 to 10 of fU,V(u,v) dv = integral from max(8,u-1) to min(10,u) of 1/2 dv

fU(u) = (min(10,u) - max(8,u-1))/2, for 0 <= u <= 11

This is the density function of U=X+Y. We can verify that it is a legitimate probability density function by checking that it integrates to 1 over its support:

integral from 0 to 11 of (min(10,u) - max(8,u-1))/2 du = 1

Here is a graph of the density function fU(u):

    1/2

     |          /

     |         /

     |        /  

     |       /  

     |      /    

     |     /    

     |    /      

     |   /      

     |  /        

     | /        

     |/          

     --------------

       0     11

The density is a triangular function with vertices at (8,0), (10,0), and (11,1/2).

To know more about density function refer here:

https://brainly.com/question/31039386?#

#SPJ11

Answer:

x = -1

Step-by-step explanation:

6(0.5x-1.5)+2x = -9-(x+6)

6(0.5x)+6(-1.5)+2x = -9-x-6

3x-9+2x = -x-15

5x-9 = -x-15

6x-9 = -15

6x = -6

x = -1

Plugging it back into the equation to check:

6(0.5(-1)-1.5)+2(-1) ?= -9-(-1+6)

6(-0.5-1.5)-2 ?= -9-5

6(-2)-2 ?= -14

-12-2 ?= -14

-14 = -14

Therefore, x = -1 is indeed the correct solution to the equation

whatever we do on one side of the equation we also do on the other side. to deal with the numbers with ease, expand the brackets first !

6(0. 5x − 1. 5) + 2x = −9 − (x + 6)

3x - 9 + 2x = -9 - x - 6

5x - 9 = -x - 15

6x - 9 = - 15

6x = - 6

x = -1

therefore the value that makes the equation true is x = -1

To complete the joint PMF, we need to fill in the matrix with the appropriate probabilities. These probabilities can be determined using historical data, an experiment, or other statistical methods. Once the matrix is complete, we can analyze the joint distribution of calls and complaints received in a 5-minute period.  

The joint PMF, denoted as P(x, y), gives us the probability of observing a particular pair of values (x, y) for the random variables X and Y. Assuming X and Y are discrete random variables and have known probability distributions, we can calculate the joint PMF using the following formula:
P(x, y) = P(X = x, Y = y)
To construct the joint PMF table, we can list all possible values of X (number of calls) and Y (number of complaints) in a matrix. Each cell of the matrix will represent the probability of observing a specific combination of X and Y values. For example, if X can take on values 0 to 5 (representing 0 to 5 calls) and Y can take on values 0 to 2 (representing 0 to 2 complaints), we will have a 6x3 matrix. The element at the (i, j) position of the matrix will be P(X = i, Y = j).

Learn more about matrix here:

https://brainly.com/question/9967572

#SPJ11
 

The equation "x + 3 = 0" is an expression that has the value of -3 and contains only positive numbers.

In the equation "x + 3 = 0," the goal is to find the value of "x" that satisfies the equation. By isolating the variable "x," we can determine the solution.

We start with the equation "x + 3 = 0" and subtract 3 from both sides, if we subtract 3 from both sides of the equation, we get:

x + 3 - 3 = 0 - 3

x = -3

Thus, in this case, the variable "x" represents the value -3, which is negative. However, the expression itself "x + 3" contains only positive numbers (3 being positive), while the resulting value of -3 comes from solving the equation.

For more details regarding equation, visit:

https://brainly.com/question/29538993

#SPJ1

Answer:

x = 16

Step-by-step explanation:

Volume of cone = (1/3) X vertical height X π r ².

567π = (1/3) (21)  (x)² = 7 (x) ²

Divide both sides by 7:

(567π) /7 =  (x) ²

81π =  (x) ²

take the square root of both sides:

x = √81π

x is a length, so must be positive.

x = 16 (nearest number)

The estimated probability of fewer than S is 0.9821.

Since np = 13×0.6 = 7.8 and nq = 13×0.4 = 5.2, both are greater than 5, which means the normal approximation can be used. To estimate P(fewer than S), we can use the continuity correction and calculate P(S < 13.5) where S is the number of successes. We can standardize using the formula z = (S - np) / √(npq) and find the corresponding z-score from a standard normal distribution table or calculator. For z = (13.5 - 7.8) / √(4.68) = 2.10, the corresponding area under the curve is 0.9821. Therefore, the estimated probability of fewer than S is 0.9821.

Learn more about probability here:

https://brainly.com/question/29221515

#SPJ11

The value of the line integral is:

[tex](1/27) (49^{(3/2)} - 13^{(3/2)})[/tex]

≈ 36.724

To evaluate the line integral:

[tex]\int C x^2/y^{(4/3)} ds[/tex]

C is the curve given by x = t² and y = t^3, and ds is the element of arc length along the curve.

We can parameterize the curve as:

r(t) = (t², t³), 1 ≤ t ≤ ∛2

Then the tangent vector to the curve is:

r'(t) = (2t, 3t²)

The length of the tangent vector is:

|r'(t)| = √(4t² + 9t⁴ = t√(4 + 9t²)

So, the element of arc length ds is:

ds = |r'(t)| dt = t√(4 + 9t²) dt

The integral becomes:

[tex]\int C x^2/y^{(4/3)} ds[/tex]

=[tex]\int(1 to 3\sqrt 2) (t^4)/(t^{(8/3)}) (t\sqrt{(4 + 9t^2)}) dt[/tex]

= [tex]\int (1 to 3\sqrt 2) t^{(2/3)}\sqrt (4 + 9t^2) dt[/tex]

To evaluate this integral, we can make the substitution u = 4 + 9t²:

u = 4 + 9t²

du/dt = 18t

dt = du/(18t)

The limits of integration become:

u(1) = 13

u(∛2) = 49

The integral becomes:

[tex]\int C x^2/y^{(4/3)} ds[/tex]

= [tex](1/18) \int (13 to 49) u^{(1/2)} du[/tex]

=[tex](1/27) (49^{(3/2)} - 13^{(3/2)})[/tex]

So, the value of the line integral is:

[tex](1/27) (49^{(3/2)} - 13^{(3/2)})[/tex]

≈ 36.724

For similar questions on line integral

https://brainly.com/question/28381095

#SPJ11

The value of p in the equation f(p) = p^4 - mp^3 - 5p^2 + 8p - n and then solve for m. Doing so, we get:m = 2 + 2√7 i. Thus, the values of m and n are given by:m = 2 + 2√7 i, n = (-49 + 11 √7 i) / 4.

Given that p^2 + p + 2 is a factor of f(p) = p^4 - mp^3 - 5p^2 + 8p - nIn order to determine the values of m and n, we can use the factor theorem which states that if a polynomial f(x) is divided by x - a and gives a remainder of 0, then x - a is a factor of the polynomial f(x).

Similarly, if a polynomial f(x) is divided by ax + b and gives a remainder of 0, then ax + b is a factor of the polynomial f(x). From the given equation, we can see that p^2 + p + 2 is a factor of f(p). So, we can write:p^2 + p + 2 = 0p^2 + p = -2 Solving this quadratic equation using the quadratic formula, we get: p = (-1 ± √7 i) / 2

Now, let's substitute p = (-1 + √7 i) / 2 in the given equation and equate it to zero, as p^2 + p + 2 = 0 for this value of p. Doing so, we get:p^4 - mp^3 - 5p^2 + 8p - n = 0 .

On simplification, we get : n = (-49 + 11 √7 i) / 4 .

This gives us the value of n as (-49 + 11 √7 i) / 4.

For the value of m, we can substitute the value of p in the equation f(p) = p^4 - mp^3 - 5p^2 + 8p - n and then solve for m. Doing so, we get : m = 2 + 2√7 i Thus, the values of m and n are given by:m = 2 + 2√7 i, n = (-49 + 11 √7 i) / 4.

To know more about Equation  visit :

https://brainly.com/question/29538993

#SPJ11