Using Fermat's Little Theorem find 52003 mod 455. Note that 455 is not a prime number and 455 = 5*7*13.

The first statement is generally true in SCRUM, as prioritizing features by cost of delay helps to ensure that the most important features are worked on first. However, other factors such as stakeholder input and team capacity should also be taken into account.

The second statement is generally false in SCRUM, as working on high value features first may not necessarily be the best approach if they also carry high risks. It is recommended to consider both value and risk factors together when prioritizing features, and to find a balance between them that works best for the project.

Scrum is an administration structure that groups use to self-sort out and pursue a shared objective. It outlines a set of meetings, instruments, and roles for successful project execution. Scrum practices allow teams to self-manage, learn from experience, and adapt to change, much like a sports team practicing for a big game.

Know more about SCRUM, here:

https://brainly.com/question/31719654

#SPJ11

The next step that will happen in the boot process after the "Power-On Self Test (POST)" is the BIOS locating and reading the configuration settings stored in the CMOS memory.

Explanation:

1. Power-On Self Test (POST): The POST is the initial step of the boot process where the computer's BIOS performs a series of diagnostic tests to ensure that hardware components are functioning properly. This includes checking the system memory, processor, storage devices, and other connected peripherals.

2. Boot Sector Execution: Once the POST is completed, the BIOS proceeds to boot the computer using the first drive that contains a valid boot sector. The boot sector is a small portion of the disk that contains code responsible for initiating the boot process. The code in the boot sector is executed, and control of the boot process is handed over to the Windows Boot Manager.

3. Windows Boot Manager: After executing the code in the boot sector, the BIOS locates and hands over control to the Windows Boot Manager. The Boot Manager is a component of the Windows operating system that presents the user with a boot menu, allowing them to choose the operating system they want to start if there are multiple installed on the system.

4. CMOS Configuration Reading: The BIOS then proceeds to locate and read the configuration settings stored in the CMOS memory. CMOS (Complementary Metal-Oxide-Semiconductor) is a technology used to store the BIOS settings, including system date and time, boot device order, hardware configurations, and other parameters.

The configuration settings stored in the CMOS memory are crucial for the BIOS to properly initialize and configure hardware components during the boot process. The BIOS reads this information to determine various settings, such as the boot device priority, which dictates the order in which the computer searches for bootable devices.

By accessing the CMOS memory, the BIOS ensures that the computer is set up correctly according to the user's configured preferences and settings. Once the BIOS has read the configuration settings, it proceeds to load the selected operating system, in this case, Windows 10, and continues with the subsequent stages of the boot process.

To know more about CMOS memory, please click on:

https://brainly.com/question/30197887

#SPJ11

Here is the code in Python:

total_tickets = 20

remaining_tickets = total_tickets

total_buyers = 0

while remaining_tickets > 0:

   print(f"There are currently {remaining_tickets} tickets remaining.")

   num_tickets = int(input("How many tickets would you like to purchase? "))

   if num_tickets > 4:

       print("Sorry, you cannot purchase more than 4 tickets.")

       continue

   elif num_tickets > remaining_tickets:

       print("Sorry, there are not enough tickets remaining.")

       continue

   else:

       remaining_tickets -= num_tickets

       total_buyers += 1

print(f"The total number of buyers was {total_buyers}.")

This program uses a while loop to continue prompting the user for ticket purchases until all tickets are sold out. The number of remaining tickets is stored in a variable called remaining_tickets, and the total number of buyers is stored in a variable called total_buyers.

The program first displays the current number of remaining tickets and prompts the user for the number of tickets they want to purchase. If the user inputs a number greater than 4 or greater than the remaining number of tickets, the program displays an error message and continues the loop without subtracting any tickets. If the user inputs a valid number of tickets, the program subtracts that number from the remaining tickets and adds 1 to the total number of buyers.

Once all tickets have been sold, the program displays the total number of buyers.

For example, here is a screenshot of the program's execution:

TicketSeller execution screenshot

For more questions Program click the link below:

https://brainly.com/question/11023419

#SPJ11

The statement "When a struct is dynamically allocated to a pointer, we still use the dot operator to access members of the struct" is false. We should use the arrow operator (->) to access the members of a dynamically allocated struct through a pointer.

When working with C programming language, it is essential to understand the concept of structs and pointers. Structs are used to define a group of related variables that can be accessed using a single name. Pointers are variables that store memory addresses. Dynamic memory allocation refers to the process of allocating memory during runtime instead of compile-time. When a struct is dynamically allocated to a pointer, we still use the (arrow operator) to access members of the struct instead of the dot operator. The arrow operator is used to access the member of a structure or union through its pointer. This is because a dynamically allocated struct returns a pointer to the first memory address of the struct. Thus, we must use the arrow operator to access the struct members through the pointer.

In conclusion, the statement "When a struct is dynamically allocated to a pointer we still use the (dot operator) to access members of the struct" is false. We use the arrow operator instead to access members of a struct when it is dynamically allocated to a pointer. It is crucial to understand the difference between the dot and arrow operators when working with structs and pointers in C programming language.

To learn more about pointer, visit:

https://brainly.com/question/31666990

#SPJ11

There are two types of scheduled Windows backup jobs - full backup and incremental backup.

The full backup job is a complete backup of all selected files and folders, and it clears the archive attribute of each file after it is backed up.

The incremental backup job, on the other hand, only backs up files that have changed since the last backup and does not clear the archive attribute. This means that the next incremental backup will only back up files that have changed since the previous incremental backup.

Therefore, if you want to keep the archive attribute intact, you should choose the incremental backup option. This allows you to keep track of changes made to files and ensure that only the modified files are backed up, saving time and storage space.

Learn more about incremental backup at

https://brainly.com/question/31422693

#SPJ11

Answer:

These are freshwater bodies and the area should likely be measured as acres.

Explanation:

These appear to be lakes which will almost always be freshwater and they appear to be of a decent size though less than a mile so acres seem to be an appropriate unit of area.

True. In a brute force attack, a cracker employs a program to systematically try different character combinations until the system accepts a valid username and password.

A brute force attack is a method used by malicious individuals to gain unauthorized access to a system or an account by systematically trying all possible combinations of usernames and passwords. The attacker typically uses an automated program or script that iterates through various character combinations, starting from simple ones and gradually increasing in complexity until a successful match is found.

The goal of a brute force attack is to exploit weak or easily guessable usernames and passwords by systematically trying different combinations until a valid one is discovered. This method relies on the assumption that the attacker can eventually find the correct credentials through sheer persistence and exhaustive search.

Brute force attacks can be time-consuming and resource-intensive, but they can be effective against weak or poorly protected systems. To defend against such attacks, it is crucial to use strong and unique passwords, implement account lockout policies, and employ additional security measures such as multi-factor authentication.

Learn more about  brute force attack here:

https://brainly.com/question/31839267

#SPJ11

The two characteristics of coaxial network cable are that it uses two concentric metallic conductors and that the conductors within the cable are twisted around each other to eliminate crosstalk.

Coaxial cable is a type of cable that is used for transmitting high-frequency signals, typically for cable TV, internet, and telephone services. The cable consists of a central conductor made of copper that is surrounded by an insulating layer, a metallic shield, and an outer plastic or rubber coating.

The first option, that coaxial cable is totally immune to electromagnetic interference (EMI), is not accurate. While coaxial cable is better at rejecting EMI than other types of cables, it is not completely immune to it. EMI can still affect the performance of coaxial cable, especially if the cable is damaged or poorly installed.

To know more about network visit:-

https://brainly.com/question/13992507

#SPJ11

1. False: IPSec protects both the payload and the header of a TCP packet.2. False: SSL/TLS protects only the payload of a TCP packet, not the header.

Are the given statements true or false?

The first statement is false. IPSec, which stands for Internet Protocol Security, can be used to protect not only the payload but also the header of a TCP packet.

It provides security services such as data confidentiality, integrity, and authentication for IP packets, including both the payload and the IP header.

The second statement is also false. SSL/TLS, which stands for Secure Sockets Layer/Transport Layer Security, primarily focuses on securing the payload or application layer data transmitted over a TCP connection. It encrypts the data to ensure confidentiality and integrity. However, SSL/TLS does not provide protection for the TCP header itself, as it operates at a higher layer in the network protocol stack.

IPSec can protect both the payload and the header of a TCP packet, while SSL/TLS primarily focuses on protecting the payload but does not extend its security to the TCP header.

Learn more about TCP packet

brainly.com/question/32269790

#SPJ11

When using the 'javac' command to compile a program that contains a raw type codebase, the compiler generates a warning message to indicate the usage of raw types. However, it still compiles the program, allowing it to run.

The warning message serves as a reminder that raw types should be avoided and replaced with parameterized types for type safety and better code quality. It is highly recommended to address these warnings by providing type arguments to the generic types used in the program. Failure to do so may result in potential type-related errors and reduced type safety. Although the compiler allows the compilation of programs with raw types, it is important to understand and address the underlying issues to ensure a more robust and maintainable codebase.

Learn more about codebase here: brainly.com/question/28582526

#SPJ11

The class you're looking for is DataOutputStream. DataOutputStream is a Java class that extends FilterOutputStream and provides methods to write various data types to an output stream in a machine-independent way.

This class allows you to write one field at a time to a file, ensuring that the written data can be read back in a consistent manner.

To use DataOutputStream, you typically create an instance of it by wrapping it around another OutputStream, such as FileOutputStream or BufferedOutputStream. This allows you to efficiently write data to a file, while also providing a flexible and modular approach to managing output streams.

Here's a simple example of using DataOutputStream to write an integer and a string to a file:

```
import java.io.*;

public class DataOutputExample {
   public static void main(String[] args) {
       try {
           FileOutputStream fos = new FileOutputStream("example.txt");
           BufferedOutputStream bos = new BufferedOutputStream(fos);
           DataOutputStream dos = new DataOutputStream(bos);

           int num = 42;
           String str = "Hello, World!";

           dos.writeInt(num);
           dos.writeUTF(str);

           dos.close();
       } catch (IOException e) {
           e.printStackTrace();
       }
   }
}
```

In this example, a FileOutputStream is created for the "example.txt" file, which is then wrapped with a BufferedOutputStream for efficiency, and finally wrapped with a DataOutputStream to write different data types. The `writeInt` and `writeUTF` methods are used to write an integer and a string, respectively, to the file.

Know more about the OutputStream

https://brainly.com/question/29354668

#SPJ11

The associated trees for the given array representing disjoint sets are:

       2         3     6   7

     /   \        |

    0     1       4

             /    |   \

            5     -1  -1

In the given array, each element represents a node in a tree, and the value at each index points to the parent node. Starting from index 0, we traverse the array and draw edges between each node and its parent to create the associated trees.

The trees are formed by connecting the nodes based on their parent-child relationships. Nodes with the same parent form a disjoint set. The array represents the roots of each tree, and the elements with negative values indicate that they are root nodes.

By drawing the edges accordingly, we can visualize the trees as shown above.

To gain a deeper understanding of representing disjoint sets and drawing associated trees, you can explore graph theory and specifically the concept of union-find data structure.

This data structure allows efficient operations to track and merge disjoint sets. Understanding the implementation and algorithms related to union-find can be helpful in various applications, such as network connectivity, image segmentation, and more.

Learn more about given array

brainly.com/question/29891672

#SPJ11

it important to disable wi-fi and bluetooth when you are not using them Because It saves battery and reduces the risk of unauthorized access.

Disabling Wi-Fi and Bluetooth when not in use can significantly save battery life on devices like smartphones, laptops, and tablets. Both of these wireless technologies consume power even when they are not actively in use, as they are constantly searching for connections to nearby devices or networks. Additionally, leaving these features turned on when not in use can increase the risk of unauthorized access to your device or personal information. Hackers can use Bluetooth and Wi-Fi signals to gain access to your device and potentially steal sensitive data or install malware. By disabling these features when they are not needed, you can conserve battery life and reduce the risk of unauthorized access, helping to keep your device and personal information safe.

learn more about Wi-Fi here:

https://brainly.com/question/31918404

#SPJ11

Disabling Wi-Fi and Bluetooth when they are not being used is essential due to reasons related to battery life conservation, data security, and avoiding unwanted or disruptive connections.

It is important to disable Wi-Fi and Bluetooth when they are not in use due to several reasons. First, keeping these functions on can consume additional battery power and therefore decrease the lifespan of your device's battery. Second, leaving these features on can pose a security risk. Hackers can exploit vulnerabilities in these wireless technologies to tap into your device and steal sensitive information. Third, disabling Wi-Fi and Bluetooth can also help you avoid unwanted connections or disruptive signals that can interfere with other devices or functions on your device.

https://brainly.com/question/33560767

Since the page size is 1MB, it can hold 2^{20}220 bytes of data. This means that the offset part of the virtual address will be 20 bits long.

Since the physical address is represented by 32 bits, each page table entry is 4 bytes long, and the inner page table fills up a whole 1MB page, each inner page table can hold 2^{20}220 / 4 = 2^{18}218 entries.Assuming a two-level page table, the highest-level bits of the virtual address (p1) will index into the outer page table, which will contain pointers to inner page tables. Since there are 48 bits in the virtual address and the inner page table is indexed by the lower-order bits, the p1 part of the virtual address will be 48 - 20 - log_2(2^{18}218) = 48 - 20 - 18 = 10 bits long.The p2 part of the virtual address will index into the inner page table. Since the inner page table is filled up by a whole 1MB page, it will contain 2^{20}220 / 4 = 2^{18}218 entries. Since 10 bits are used for p1, the remaining bits of the virtual address will be used for p2, so the p2 part will be 48 - 20 - 10 = 18 bits long.

To know more about bytes click the link below:

brainly.com/question/30825691

#SPJ11

The machine that always initiates the communication between the DHCP server and the client in lease negotiation is the client.

In the lease negotiation process between a DHCP (Dynamic Host Configuration Protocol) server and a client, it is the client machine that always initiates the communication. The client sends a DHCPDISCOVER message, which is a broadcast request to discover available DHCP servers on the network. This message is sent by the client to the broadcast address, allowing any DHCP server present on the network to respond.

Upon receiving the DHCPDISCOVER message, the DHCP server responds with a DHCPOFFER message. This message contains the proposed IP address, lease duration, subnet mask, gateway, DNS servers, and other configuration options.

The client then selects one of the DHCPOFFER responses and sends a DHCPREQUEST message to the chosen DHCP server, indicating its acceptance of the offered lease.

Finally, the DHCP server acknowledges the client's request by sending a DHCPACK message, confirming the lease, and providing the client with the assigned IP address and lease information.

Throughout this process, it is the client that initiates the communication with the DHCP server, allowing for negotiation and assignment of IP address and configuration parameters.

To learn more about DHCP server, visit:

https://brainly.com/question/30490668

#SPJ11

True. Phishing scams have indeed spread to text messaging and social networking sites.

Phishing scams are fraudulent attempts to deceive individuals or organizations into revealing sensitive information, such as usernames, passwords, credit card numbers, or social security numbers. These scams typically occur through email, text messages, or malicious websites that impersonate legitimate entities.

Here are some common types of phishing scams:

1. Email Phishing: Attackers send deceptive emails that appear to be from reputable organizations or individuals, such as banks, social media platforms, or government agencies. These emails often contain urgent requests for personal information or links to fake websites that mimic the legitimate ones.

2. Spear Phishing: This type of phishing targets specific individuals or organizations by gathering personal information about them. Attackers craft personalized messages, making them appear more legitimate and increasing the likelihood of victims falling for the scam.

3. Smishing: Smishing, or SMS phishing, involves sending fraudulent text messages to trick recipients into clicking on malicious links or providing personal information. The messages often claim to be from banks, retailers, or service providers.

4. Vishing: Vishing, or voice phishing, occurs when scammers make phone calls impersonating legitimate organizations, such as banks or tech support. They use social engineering techniques to trick individuals into revealing sensitive information over the phone.

5. Pharming: In pharming attacks, hackers redirect users from legitimate websites to fake ones without their knowledge. This is often done by compromising the DNS (Domain Name System) settings or utilizing malware on the user's device.

To learn more about phishing visit-

https://brainly.com/question/2376546

#SPJ11

True. While subscription-based websites rely on subscription fees for revenue, some also display ads to their subscribers.

This practice can be seen in various industries, such as news outlets and streaming services. However, the decision to display ads to subscribers is dependent on the specific website's business model and goals. Some may prioritize providing a completely ad-free experience for subscribers, while others may see it as an additional source of revenue. Ultimately, it is up to the website to determine whether or not to display ads to their subscribers.

learn more about subscription-based websites here:

https://brainly.com/question/32315897

#SPJ11

An uninstaller utility software is designed to remove certain items from a computer system. The items that can be removed by an uninstaller utility software include temporary files, programs, and applications. Offline web pages, however, are not typically removed by uninstaller utilities.

An uninstaller utility software is a program that assists in the removal of software or applications from a computer system. When you install a program or application on your computer, it may create temporary files for various purposes. These temporary files can take up disk space and may no longer be needed after the program or application is uninstalled. An uninstaller utility software can help remove these temporary files, freeing up disk space and improving system performance.

In addition to temporary files, uninstaller utilities can remove programs and applications from the system. When you uninstall a program or application, the uninstaller utility will remove all associated files, folders, and registry entries, ensuring a clean removal from the system. This helps maintain system cleanliness and prevents leftover files or registry entries that can potentially cause conflicts or errors.

Learn more about utility software here:

https://brainly.com/question/7499365

#SPJ11

Dedicated circuit for low delay; leased line more expensive.

To answer the first question, the leased line/dedicated OC3 circuit would give the smallest average packet delivery delays as it provides a dedicated and uncontested connection between the two sites. The second option involves accessing the public Internet, which can be subject to congestion and variable delays.

For the second question, the leased line/dedicated OC3 circuit would be the most expensive option as it involves the cost of leasing a dedicated circuit from a service provider. The second option involves accessing the public Internet, which may be cheaper, but may also have additional costs such as ISP access fees.

For the third question, assuming the leased line/dedicated OC3 circuit has a bandwidth of 155 Mbps (the capacity of an OC3 circuit), the throughput for file transfers from Chicago to New York would depend on factors such as the file size, protocol used, and any network congestion. However, assuming ideal conditions, the maximum throughput would be 155 Mbps.

Learn more about leased line

brainly.com/question/31981789

#SPJ11

To modify the query to find only the official languages of each country, we need to add a condition to filter out non-official languages. We can do this by adding a WHERE clause to the query that specifies that we only want to select languages where the Is Official column is equal to 'T' (meaning it is an official language).

Here is the modified query:
SELECT country.name, GROUP_CONCAT(countrylanguage.Language SEPARATOR ', ') AS 'Official Languages'
FROM country
JOIN countrylanguage ON country.code = countrylanguage.CountryCode
WHERE countrylanguage.IsOfficial = 'T'
GROUP BY country.name;

In this modified query, we have added a WHERE clause that filters out non-official languages by checking the IsOfficial column in the countrylanguage table. We have also added a GROUP BY clause to group the results by country name and used the GROUP_CONCAT function to list all the official languages for each country on one row, separated by commas. So now, when we run this query, we will get a list of all the countries in the world and their official languages, with each country's official languages listed on one row.

To know more about query visit:-

https://brainly.com/question/31060301

#SPJ11

In MySQL with InnoDB, tables with a primary key have a sorted structure, while those without a primary key have a heap structure. The correct answer is option A.

In InnoDB, a primary key is essential for organizing and accessing data efficiently. When a table has a primary key defined, the data is physically sorted based on the primary key values. This allows for faster searching and retrieval of specific records using index-based operations.

On the other hand, tables without a primary key do not have a predefined order for storing data. Instead, they use a heap structure where new rows are inserted wherever there is available space in the storage.

Therefore, the correct answer is option A: sorted, heap. Tables with a primary key have a sorted structure, while those without a primary key have a heap structure.

You can learn more about MySQL at

https://brainly.com/question/29326730

#SPJ11

Some Issues with provided code: There is  Typo in "studnets" instead of "students" causing NameError in line 17 and print statement. In the Student class's __repr__() method, self.courses must be converted to a string representation because it is a dictionary object.

An error code is a code that represents an error's nature and, when possible, its cause. It can be reported to end users, used in communication protocols, or within programs to indicate abnormal conditions.

Also, the typo is seen also in the addCourse() method of the Student class, use of __courses instead of courses will cause an AttributeError. Also, IntType is not defined.

Learn more about   code error from

https://brainly.com/question/31948818

#SPJ4

To configure a BranchCache server in hosted cache mode, the minimum operating system version requirement is Windows Server 2012 or later.

BranchCache is a feature available in Windows Server operating systems that helps optimize network bandwidth and improve the performance of network file transfers. In hosted cache mode, BranchCache enables a server to act as a cache for content downloaded from the network, allowing subsequent client requests for the same content to be served from the local cache rather than retrieving it from the network again.

Windows Server 2012 introduced improvements and new features to BranchCache, including enhanced scalability and performance. Therefore, Windows Server 2012 or a later version is required to configure a BranchCache server in hosted cache mode.

To learn more about windows server visit-

https://brainly.com/question/28272637

#SPJ11

When looking for a source that closely resembles the point of view and content of "Where Have You Gone, Charing Billy," it's important to consider the themes of the story.

This includes the horrors of war, the struggle of soldiers to cope with trauma and loss, and the impact of war on families and communities. One possible source that closely aligns with these themes is Tim O'Brien's "The Things They Carried." This book explores the experiences of soldiers during the Vietnam War, and includes similar themes of loss, trauma, and the impact of war on those who fight it. Both stories also use powerful imagery and vivid descriptions to paint a picture of the emotional toll of war. Overall, "The Things They Carried" is a source that closely resembles the point of view and content of "Where Have You Gone, Charing Billy."

learn more about"Where Have You Gone, Charing Billy," here:

https://brainly.com/question/31851297

#SPJ11

To set a static IP address with a subnet mask on your system, the specific command you use can be netsh command for Windows, ifconfig or ip command for Linux, and networksetup command for macOS.

To set a static IP address with a subnet mask on your system, the specific command you use depends on the operating system you are using. Here are examples of commands for different operating systems:

For Windows:

You can use the netsh command in Command Prompt to set a static IP address. Here's an example command:

netsh interface ip set address "InterfaceName" static IPAddress SubnetMask DefaultGateway

Replace "InterfaceName" with the name of your network interface, IPAddress with the desired IP address, SubnetMask with the subnet mask, and DefaultGateway with the default gateway IP address.

For Linux (Ubuntu):

You can use the ifconfig or ip command in the terminal to set a static IP address. Here's an example command using ifconfig:

sudo ifconfig InterfaceName IPAddress netmask SubnetMask

Replace "InterfaceName" with the name of your network interface, IPAddress with the desired IP address, and SubnetMask with the subnet mask.

For macOS:

You can use the networksetup command in Terminal to set a static IP address. Here's an example command:

sudo networksetup -setmanual "InterfaceName" IPAddress SubnetMask DefaultGateway

Replace "InterfaceName" with the name of your network interface, IPAddress with the desired IP address, SubnetMask with the subnet mask, and DefaultGateway with the default gateway IP address.

Learn more about IP address at: https://brainly.com/question/14219853

#SPJ11

Using a new block chain with pre-mining for initial allocation may offer more control, but it can lead to centralization and lack of trust. Two-way pegged sidechains offer more flexibility but may suffer from security risks.


Launching a new altcoin using a new block chain with pre-mining for initial allocation can offer the advantage of having more control over the distribution of the currency. However, this approach can lead to centralization and lack of trust from the community, as the initial allocation may not be seen as fair or transparent.

On the other hand, a two-way pegged sidechain allows for more flexibility in terms of interoperability with other blockchains and assets. However, this approach may suffer from security risks, as the peg between the main chain and the sidechain needs to be secure to avoid the possibility of attacks.

Ultimately, the choice between these two approaches depends on the specific needs and goals of the altcoin project, as well as the trade-offs between control, transparency, flexibility, and security.

Learn more about blockchains here:

https://brainly.com/question/26684744

#SPJ11

An AI language model, I don't have access to specific data or databases unless provided to me. Therefore, I cannot give you the exact information about the number of records in the employee table or the number of attributes in the branches table.

The number of records in the employee table refers to the number of rows in the table, representing individual employees.

The number of attributes in the branches table refers to the number of columns or fields in the table, representing different characteristics or properties of branches. A primary key for the employee table is typically a unique identifier that uniquely identifies each employee, such as an employee ID.

The number of decimal places that can be stored in an employee's salary field depends on the data type used to store the salary. Common data types like DECIMAL or NUMERIC allow you to specify the precision (total number of digits) and scale (number of decimal places) for a decimal value.

Learn more about decimal on:

https://brainly.com/question/30958821

#SPJ1

Here are sample scripts for both Windows and Linux that meet the given parameters:

Windows script:

echo off

setlocal

set backupdir=c:\Backup

set today=%DATE:~0,3%

if %today%==Tue (

   robocopy c:\Users %backupdir% /E /MIR

) else if %today%==Thu (

   robocopy c:\Users %backupdir% /E /MIR

)

set /a day=%DATE:~0,2%

if %day%==1 (

   robocopy c:\Payroll %backupdir% /E /MIR

) else if %day%==15 (

   robocopy c:\Payroll %backupdir% /E /MIR

)

if %today%==Mon (

   robocopy c:\CoFiles %backupdir% /E /MIR

) else if %today%==Wed (

   robocopy c:\CoFiles %backupdir% /E /MIR

) else if %today%==Fri (

   robocopy c:\CoFiles %backupdir% /E /MIR

)

endlocal

Linux script:

#!/bin/bash

backupdir=/Backup

today=$(date +%a)

if [ $today == "Tue" ]

then

   rsync -av --delete /home/ $backupdir

elif [ $today == "Thu" ]

then

   rsync -av --delete /home/ $backupdir

fi

day=$(date +%d)

if [ $day == "01" ]

then

   rsync -av --delete /home/Payroll/CoFiles/ $backupdir

elif [ $day == "15" ]

then

   rsync -av --delete /home/Payroll/CoFiles/ $backupdir

fi

if [ $today == "Mon" ]

then

   rsync -av --delete /home/CoFiles/ $backupdir

elif [ $today == "Wed" ]

then

   rsync -av --delete /home/CoFiles/ $backupdir

elif [ $today == "Fri" ]

then

   rsync -av --delete /home/CoFiles/ $backupdir

fi

Note that both scripts use the robocopy command on Windows and rsync command on Linux to perform the backup. Also, the Linux script assumes that the user's home directory is located at /home/. You may need to adjust the directory paths to match the actual directory structure on your system. Finally, the scripts assume that they are run as root or by a user with sufficient privileges to access the directories being backed up.

Learn more about Windows here:

https://brainly.com/question/13502522

#SPJ11

The Windows script that automate a periodic file backup to a directory called backup on the local drive:

echo off

setlocal

REM Get current day of the week

for /F "tokens=1 delims=," %%A in ('wmic path win32_localtime get dayofweek /format:list ^| findstr "="') do set %%A

REM Backup User's home directory on Tuesday and Thursday nights

if %dayofweek% equ 2 (

   xcopy /E /C /I /H /R /Y "C:\Users" "C:\Backup"

) else if %dayofweek% equ 4 (

   xcopy /E /C /I /H /R /Y "C:\Users" "C:\Backup"

)

REM Backup Company files on Monday, Wednesday, and Friday nights

if %dayofweek% equ 1 (

   xcopy /E /C /I /H /R /Y "C:\CoFiles" "C:\Backup"

) else if %dayofweek% equ 3 (

  xcopy /E /C /I /H /R /Y "C:\CoFiles" "C:\Backup"

) else if %dayofweek% equ 5 (

   xcopy /E /C /I /H /R /Y "C:\CoFiles" "C:\Backup"

)

REM Backup Payroll on the 1st and 15th of each month

for /F "tokens=1 delims=/" %%A in ("%date%") do set day=%%A

if %day% equ 1 (

   xcopy /E /C /I /H /R /Y "C:\Payroll" "C:\Backup"

) else if %day% equ 15 (

  xcopy /E /C /I /H /R /Y "C:\Payroll" "C:\Backup"

)

endlocal

Please ensure that you modify the file paths (such as C:Users, C:Payroll, /home/user, /home/Payroll, etc.) to accurately reflect the directories on your system. Before executing the scripts, make certain that the directory where the backup is saved (C:Backup, /Backup) already exists.

Read more about Windows script here:

https://brainly.com/question/26165623
#SPJ4

The difference between a search engine and a search tool is that a search engine is a specific type of search tool that uses automated algorithms to index and retrieve information from the web.

A search engine is a specialized search tool that uses automated algorithms to index and retrieve information from the internet. It is designed to crawl and index web pages, documents, images, videos, and other online content. Examples of popular search engines include , Bing, and Yahoo.

On the other hand, a search tool is a broader term that encompasses various applications or software used to perform searches. While a search engine is a specific type of search tool, there are other types of search tools that serve different purposes. For example:

Desktop Search Tools: These tools are installed on a computer and help users search for files, documents, emails, or other content stored locally on their device. Examples include Windows Search, Spotlight (for Mac), or third-party tools like Everything or Copernic Desktop Search.

Database Search Tools: These tools are used to search and retrieve information from databases. They enable users to query structured data and find specific records or information based on their search criteria. Examples include SQL-based query tools or specialized database search software.

Enterprise Search Tools: These tools are designed for organizations to search for information within their internal systems, such as intranets, document repositories, or knowledge bases. They help employees locate relevant information quickly and efficiently.

In summary, a search engine specifically refers to a search tool that indexes and retrieves web content, whereas a search tool is a broader term that encompasses various types of tools used for searching information, including search engines, desktop search tools, database search tools, and enterprise search tools.

For more question on search engine visit:

https://brainly.com/question/512733

#SPJ8

The object called game in the game.js file program is given below.

// Solution:

// Define the game object with initial properties and methods

const game = {

lives: 3,

coins: 0,

get points() {

return this.coins * 10;

},

playerDies() {

if (this.lives > 0) {

this.lives--;

}

},

newGame() {

this.lives = 3;

this.coins = 0;

}

};

//DO NOT EDIT VALUES BELOW THIS COMMENT

console.log("lives = " + game.lives); // should be 3

console.log("coins = " + game.coins); // should be 0

console.log("points = " + game.points); // should be 0

game.coins = 2;

console.log("points = " + game.points); // should be 20

game.playerDies();

console.log("lives = " + game.lives); // should be 2

game.playerDies();

game.playerDies();

game.playerDies();

console.log("lives = " + game.lives); // should be 0

game.newGame();

console.log("lives = " + game.lives); // should be 3

console.log("coins = " + game.coins); // should be 0

// End of solution

To know more about game.js file, visit:

brainly.com/question/31767642

#SPJ11